#! /bin/sh # hints/hpux.sh # Perl Configure hints file for Hewlett-Packard's HP-UX 9.x and 10.x # (Hopefully, 7.x through 11.x.) # # This file is based on hints/hpux_9.sh, Perl Configure hints file for # Hewlett Packard HP-UX 9.x # # Use Configure -Dcc=gcc to use gcc. # # From: Jeff Okamoto # and # hints/hpux_10.sh, Perl Configure hints file for Hewlett Packard HP-UX 10.x # From: Giles Lean # and # Use #define CPU_* instead of comments for >= 10.x. # Support PA1.2 under 10.x. # Distinguish between PA2.0, PA2.1, etc. # Distinguish between MC68020, MC68030, MC68040 # Don't assume every OS != 10 is < 10, (e.g., 11). # From: Chuck Phillips # HP-UX 10 pthreads hints: Matthew T Harden # From: Dominic Dunlop # Abort and offer advice if bundled (non-ANSI) C compiler selected # From: H.Merijn Brand # ccversion detection # perl/64/HP-UX wants libdb-3.0 to be shared ELF 64 # generic pthread support detection for PTH package # This version: March 8, 2000 # Current maintainer: Jeff Okamoto #-------------------------------------------------------------------- # Use Configure -Dcc=gcc to use gcc. # Use Configure -Dprefix=/usr/local to install in /usr/local. # # You may have dynamic loading problems if the environment variable # LDOPTS='-a archive'. Under >= 10.x, you can instead LDOPTS='-a # archive_shared' to prefer archive libraries without requiring them. # Regardless of HPUX release, in the "libs" variable or the ext.libs # file, you can always give explicit path names to archive libraries # that may not exist on the target machine. E.g., /usr/lib/libndbm.a # instead of -lndbm. See also note below on ndbm. # # ALSO, bear in mind that gdbm and Berkely DB contain incompatible # replacements for ndbm (and dbm) routines. If you want concurrent # access to ndbm files, you need to make sure libndbm is linked in # *before* gdbm and Berkely DB. Lastly, remember to check the # "ext.libs" file which is *probably* messing up the order. Often, # you can replace ext.libs with an empty file to fix the problem. # # If you get a message about "too much defining", as may happen # in HPUX < 10, you might have to append a single entry to your # ccflags: '-Wp,-H256000' # NOTE: This is a single entry (-W takes the argument 'p,-H256000'). #-------------------------------------------------------------------- # Turn on the _HPUX_SOURCE flag to get many of the HP add-ons # regardless of compiler. For the HP ANSI C compiler, you may also # want to include +e to enable "long long" and "long double". # # HP compiler flags to include (if at all) *both* as part of ccflags # and cc itself so Configure finds (and builds) everything # consistently: # -Aa -D_HPUX_SOURCE +e # # Lastly, you may want to include the "-z" HP linker flag so that # reading from a NULL pointer causes a SEGV. ccflags="$ccflags -D_HPUX_SOURCE" # Check if you're using the bundled C compiler. This compiler doesn't support # ANSI C (the -Aa flag) and so is not suitable for perl 5.5 and later. case "$cc" in '') if cc $ccflags -Aa 2>&1 | $contains 'option' >/dev/null then cat <<'EOM' >&4 The bundled C compiler is not ANSI-compliant, and so cannot be used to build perl. Please see the file README.hpux for advice on alternative compilers. Cannot continue, aborting. EOM exit 1 else ccflags="$ccflags -Aa" # The add-on compiler supports ANSI C # cppstdin and cpprun need the -Aa option if you use the unbundled # ANSI C compiler (*not* the bundled K&R compiler or gcc) # [XXX this should be set automatically by Configure, but isn't yet.] # [XXX This is reported not to work. You may have to edit config.sh. # After running Configure, set cpprun and cppstdin in config.sh, # run "Configure -S" and then "make".] cpprun="${cc:-cc} -E -Aa" cppstdin="$cpprun" cppminus='-' cpplast='-' fi case "$optimize" in # For HP's ANSI C compiler, up to "+O3" is safe for everything # except shared libraries (PIC code). Max safe for PIC is "+O2". # Setting both causes innocuous warnings. '') optimize='-O' #optimize='+O3' #cccdlflags='+z +O2' ;; esac cc=cc ;; esac cc=${cc:-cc} case `$cc -v 2>&1`"" in *gcc*) ccisgcc="$define" ;; *) ccisgcc='' ccversion=`which cc | xargs what | awk '/Compiler/{print $2}'` ;; esac # Determine the architecture type of this system. # Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97 xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`; #xxOsRevMinor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f2`; if [ "$xxOsRevMajor" -ge 10 ] then # This system is running >= 10.x # Tested on 10.01 PA1.x and 10.20 PA[12].x. Idea: Scan # /usr/include/sys/unistd.h for matches with "#define CPU_* `getconf # CPU_VERSION`" to determine CPU type. Note the part following # "CPU_" is used, *NOT* the comment. # # ASSUMPTIONS: Numbers will continue to be defined in hex -- and in # /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept # up to date with new CPU/OS releases. xxcpu=`getconf CPU_VERSION`; # Get the number. xxcpu=`printf '0x%x' $xxcpu`; # convert to hex archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h | sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" | sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`; else # This system is running <= 9.x # Tested on 9.0[57] PA and [78].0 MC680[23]0. Idea: After removing # MC6888[12] from context string, use first CPU identifier. # # ASSUMPTION: Only CPU identifiers contain no lowercase letters. archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 | sed -e 's/HP-//' -e 1q`; selecttype='int *' fi # Do this right now instead of the delayed callback unit approach. case "$use64bitall" in $define|true|[yY]*) use64bitint="$define" ;; esac case "$use64bitint" in $define|true|[yY]*) if [ "$xxOsRevMajor" -lt 11 ]; then cat <&4 64-bit compilation is not supported on HP-UX $xxOsRevMajor. You need at least HP-UX 11.0. Cannot continue, aborting. EOM exit 1 fi # Without the 64-bit libc we cannot do much. libc='/lib/pa20_64/libc.sl' if [ ! -f "$libc" ]; then cat <&4 *** You do not seem to have the 64-bit libraries in /lib/pa20_64. *** Most importantly, I cannot find the $libc. *** Cannot continue, aborting. EOM exit 1 fi ccflags="$ccflags +DD64" ldflags="$ldflags +DD64" test -d /lib/pa20_64 && loclibpth="$loclibpth /lib/pa20_64" libswanted="$libswanted pthread" libscheck='case "`/usr/bin/file $xxx`" in *LP64*|*PA-RISC2.0*) ;; *) xxx=/no/64-bit$xxx ;; esac' if test -n "$ccisgcc" -o -n "$gccversion"; then ld="$cc" else ld=/usr/bin/ld fi ar=/usr/bin/ar full_ar=$ar if test -z "$ccisgcc" -a -z "$gccversion"; then # The strict ANSI mode (-Aa) doesn't like the LL suffixes. ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'` case "$ccflags" in *-Ae*) ;; *) ccflags="$ccflags -Ae" ;; esac fi set `echo " $libswanted " | sed -e 's@ dl @ @'` libswanted="$*" ;; esac case "$ccisgcc" in # Even if you use gcc, prefer the HP math library over the GNU one. "$define") test -d /lib/pa1.1 && ccflags="$ccflags -L/lib/pa1.1" ;; esac case "$ccisgcc" in "$define") ;; *) case "`getconf KERNEL_BITS 2>/dev/null`" in *64*) ldflags="$ldflags -Wl,+vnocompatwarnings" ;; esac ;; esac # Remove bad libraries that will cause problems # (This doesn't remove libraries that don't actually exist) # -lld is unneeded (and I can't figure out what it's used for anyway) # -ldbm is obsolete and should not be used # -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion # -lPW is obsolete and should not be used # The libraries crypt, malloc, ndir, and net are empty. # Although -lndbm should be included, it will make perl blow up if you should # copy the binary to a system without libndbm.sl. See ccdlflags below. set `echo " $libswanted " | sed -e 's@ ld @ @' -e 's@ dbm @ @' -e 's@ BSD @ @' -e 's@ PW @ @'` libswanted="$*" # By setting the deferred flag below, this means that if you run perl # on a system that does not have the required shared library that you # linked it with, it will die when you try to access a symbol in the # (missing) shared library. If you would rather know at perl startup # time that you are missing an important shared library, switch the # comments so that immediate, rather than deferred loading is # performed. Even with immediate loading, you can postpone errors for # undefined (or multiply defined) routines until actual access by # adding the "nonfatal" option. # ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags" # ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags" ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags" case "$usemymalloc" in '') usemymalloc='y' ;; esac alignbytes=8 # For native nm, you need "-p" to produce BSD format output. nm_opt='-p' # When HP-UX runs a script with "#!", it sets argv[0] to the script name. toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"' # If your compile complains about FLT_MIN, uncomment the next line # POSIX_cflags='ccflags="$ccflags -DFLT_MIN=1.17549435E-38"' # Comment this out if you don't want to follow the SVR4 filesystem layout # that HP-UX 10.0 uses case "$prefix" in '') prefix='/opt/perl5' ;; esac # HP-UX can't do setuid emulation offered by Configure case "$d_dosuid" in '') d_dosuid="$undef" ;; esac # HP-UX 11 groks also LD_LIBRARY_PATH but SHLIB_PATH # is recommended for compatibility. case "$ldlibpthname" in '') ldlibpthname=SHLIB_PATH ;; esac # HP-UX 10.20 and gcc 2.8.1 break UINT32_MAX. case "$ccisgcc" in "$define") ccflags="$ccflags -DUINT32_MAX_BROKEN" ;; esac cat > UU/cc.cbu <<'EOSH' # XXX This script UU/cc.cbu will get 'called-back' by Configure after it # XXX has prompted the user for the C compiler to use. # Get gcc to share its secrets. echo 'main() { return 0; }' > try.c # Indent to avoid propagation to config.sh verbose=`${cc:-cc} -v -o try try.c 2>&1` if echo "$verbose" | grep '^Reading specs from' >/dev/null 2>&1; then # Using gcc. : nothing to see here, move on. else # Using cc. ar=${ar:-ar} case "`$ar -V 2>&1`" in *GNU*) if test -x /usr/bin/ar; then cat <&2 *** You are using HP cc(1) but GNU ar(1). This might lead into trouble *** later on, I'm switching to HP ar to play safe. END ar=/usr/bin/ar fi ;; esac fi EOSH # Date: Fri, 6 Sep 96 23:15:31 CDT # From: "Daniel S. Lewart" # I looked through the gcc.info and found this: # * GNU CC compiled code sometimes emits warnings from the HP-UX # assembler of the form: # (warning) Use of GR3 when frame >= 8192 may cause conflict. # These warnings are harmless and can be safely ignored. cat > UU/usethreads.cbu <<'EOCBU' # This script UU/usethreads.cbu will get 'called-back' by Configure # after it has prompted the user for whether to use threads. case "$usethreads" in $define|true|[yY]*) if [ "$xxOsRevMajor" -lt 10 ]; then cat <&4 HP-UX $xxOsRevMajor cannot support POSIX threads. Consider upgrading to at least HP-UX 11. Cannot continue, aborting. EOM exit 1 fi case "$xxOsRevMajor" in 10) # Under 10.X, a threaded perl can be built if [ -f /usr/include/pthread.h ]; then if [ -f /usr/lib/libcma.sl ]; then # DCE (from Core OS CD) is installed # It needs # libcma and OLD_PTHREADS_API. Also # needs to be #included before any other includes # (in perl.h) # HP-UX 10.X uses the old pthreads API d_oldpthreads="$define" # include libcma before all the others libswanted="cma $libswanted" # tell perl.h to include before other include files ccflags="$ccflags -DPTHREAD_H_FIRST" # CMA redefines select to cma_select, and cma_select expects int * # instead of fd_set * (just like 9.X) selecttype='int *' elif [ -f /usr/lib/libpthread.sl ]; then # PTH package is installed libswanted="pthread $libswanted" else libswanted="no_threads_available" fi else libswanted="no_threads_available" fi if [ $libswanted = "no_threads_available" ]; then cat <&4 In HP-UX 10.X for POSIX threads you need both of the files /usr/include/pthread.h and either /usr/lib/libcma.sl or /usr/lib/libpthread.sl. Either you must upgrade to HP-UX 11 or install a posix thread library: DCE-CoreTools from HP-UX 10.20 Hardware Extensions 3.0 CD (B3920-13941) or PTH package from http://hpux.tn.tudelft.nl/hppd/hpux/alpha.html Cannot continue, aborting. EOM exit 1 fi ;; 11 | 12) # 12 may want upping the _POSIX_C_SOURCE datestamp... ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags" set `echo X "$libswanted "| sed -e 's/ c / pthread c /'` shift libswanted="$*" ;; esac usemymalloc='n' ;; esac EOCBU case "$uselargefiles-$ccisgcc" in "$define-$define"|'-define') cat <&4 *** I'm ignoring large files for this build because *** I don't know how to do use large files in HP-UX using gcc. EOM uselargefiles="$undef" ;; esac cat > UU/uselargefiles.cbu <<'EOCBU' # This script UU/uselargefiles.cbu will get 'called-back' by Configure # after it has prompted the user for whether to use large files. case "$uselargefiles" in ''|$define|true|[yY]*) # there are largefile flags available via getconf(1) # but we cheat for now. (Keep that in the left margin.) ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64" ccflags="$ccflags $ccflags_uselargefiles" if test -z "$ccisgcc" -a -z "$gccversion"; then # The strict ANSI mode (-Aa) doesn't like large files. ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'` case "$ccflags" in *-Ae*) ;; *) ccflags="$ccflags -Ae" ;; esac fi ;; esac EOCBU # keep that leading tab. ccisgcc=''