/*- * Copyright (c) 1992 Keith Muller. * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Keith Muller of the University of California, San Diego. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint #if 0 static char sccsid[] = "@(#)cpio.c 8.1 (Berkeley) 5/31/93"; #endif #endif /* not lint */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include "pax.h" #include "cpio.h" #include "extern.h" static int rd_nm(ARCHD *, int); static int rd_ln_nm(ARCHD *); static int com_rd(ARCHD *); /* * Routines which support the different cpio versions */ static int swp_head; /* binary cpio header byte swap */ /* * Routines common to all versions of cpio */ /* * cpio_strd() * Fire up the hard link detection code * Return: * 0 if ok -1 otherwise (the return values of lnk_start()) */ int cpio_strd(void) { return(lnk_start()); } /* * cpio_trail() * Called to determine if a header block is a valid trailer. We are * passed the block, the in_sync flag (which tells us we are in resync * mode; looking for a valid header), and cnt (which starts at zero) * which is used to count the number of empty blocks we have seen so far. * Return: * 0 if a valid trailer, -1 if not a valid trailer, */ int cpio_trail(ARCHD *arcn) { /* * look for trailer id in file we are about to process */ if ((strcmp(arcn->name, TRAILER) == 0) && (arcn->sb.st_size == 0)) return(0); return(-1); } /* * com_rd() * operations common to all cpio read functions. * Return: * 0 */ static int com_rd(ARCHD *arcn) { arcn->skip = 0; arcn->pat = NULL; arcn->org_name = arcn->name; switch(arcn->sb.st_mode & C_IFMT) { case C_ISFIFO: arcn->type = PAX_FIF; break; case C_ISDIR: arcn->type = PAX_DIR; break; case C_ISBLK: arcn->type = PAX_BLK; break; case C_ISCHR: arcn->type = PAX_CHR; break; case C_ISLNK: arcn->type = PAX_SLK; break; case C_ISOCK: arcn->type = PAX_SCK; break; case C_ISCTG: case C_ISREG: default: /* * we have file data, set up skip (pad is set in the format * specific sections) */ arcn->sb.st_mode = (arcn->sb.st_mode & 0xfff) | C_ISREG; arcn->type = PAX_REG; arcn->skip = arcn->sb.st_size; break; } if (chk_lnk(arcn) < 0) return(-1); return(0); } /* * cpio_end_wr() * write the special file with the name trailer in the proper format * Return: * result of the write of the trailer from the cpio specific write func */ int cpio_endwr(void) { ARCHD last; /* * create a trailer request and call the proper format write function */ memset(&last, 0, sizeof(last)); last.nlen = sizeof(TRAILER) - 1; last.type = PAX_REG; last.sb.st_nlink = 1; (void)strcpy(last.name, TRAILER); return((*frmt->wr)(&last)); } /* * rd_nam() * read in the file name which follows the cpio header * Return: * 0 if ok, -1 otherwise */ static int rd_nm(ARCHD *arcn, int nsz) { /* * do not even try bogus values */ if ((nsz == 0) || (nsz > (int)sizeof(arcn->name))) { paxwarn(1, "Cpio file name length %d is out of range", nsz); return(-1); } /* * read the name and make sure it is not empty and is \0 terminated */ if ((rd_wrbuf(arcn->name,nsz) != nsz) || (arcn->name[nsz-1] != '\0') || (arcn->name[0] == '\0')) { paxwarn(1, "Cpio file name in header is corrupted"); return(-1); } return(0); } /* * rd_ln_nm() * read in the link name for a file with links. The link name is stored * like file data (and is NOT \0 terminated!) * Return: * 0 if ok, -1 otherwise */ static int rd_ln_nm(ARCHD *arcn) { /* * check the length specified for bogus values */ if ((arcn->sb.st_size == 0) || (arcn->sb.st_size >= sizeof(arcn->ln_name))) { # ifdef NET2_STAT paxwarn(1, "Cpio link name length is invalid: %lu", arcn->sb.st_size); # else paxwarn(1, "Cpio link name length is invalid: %ju", (uintmax_t)arcn->sb.st_size); # endif return(-1); } /* * read in the link name and \0 terminate it */ if (rd_wrbuf(arcn->ln_name, (int)arcn->sb.st_size) != (int)arcn->sb.st_size) { paxwarn(1, "Cpio link name read error"); return(-1); } arcn->ln_nlen = arcn->sb.st_size; arcn->ln_name[arcn->ln_nlen] = '\0'; /* * watch out for those empty link names */ if (arcn->ln_name[0] == '\0') { paxwarn(1, "Cpio link name is corrupt"); return(-1); } return(0); } /* * Routines common to the extended byte oriented cpio format */ /* * cpio_id() * determine if a block given to us is a valid extended byte oriented * cpio header * Return: * 0 if a valid header, -1 otherwise */ int cpio_id(char *blk, int size) { if ((size < (int)sizeof(HD_CPIO)) || (strncmp(blk, AMAGIC, sizeof(AMAGIC) - 1) != 0)) return(-1); return(0); } /* * cpio_rd() * determine if a buffer is a byte oriented extended cpio archive entry. * convert and store the values in the ARCHD parameter. * Return: * 0 if a valid header, -1 otherwise. */ int cpio_rd(ARCHD *arcn, char *buf) { int nsz; HD_CPIO *hd; /* * check that this is a valid header, if not return -1 */ if (cpio_id(buf, sizeof(HD_CPIO)) < 0) return(-1); hd = (HD_CPIO *)buf; /* * byte oriented cpio (posix) does not have padding! extract the octal * ascii fields from the header */ arcn->pad = 0L; arcn->sb.st_dev = (dev_t)asc_ul(hd->c_dev, sizeof(hd->c_dev), OCT); arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), OCT); arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), OCT); arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), OCT); arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), OCT); arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink), OCT); arcn->sb.st_rdev = (dev_t)asc_ul(hd->c_rdev, sizeof(hd->c_rdev), OCT); #ifdef NET2_STAT arcn->sb.st_mtime = (time_t)asc_ul(hd->c_mtime, sizeof(hd->c_mtime), OCT); #else arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime, sizeof(hd->c_mtime), OCT); #endif arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime; #ifdef NET2_STAT arcn->sb.st_size = (off_t)asc_ul(hd->c_filesize,sizeof(hd->c_filesize), OCT); #else arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,sizeof(hd->c_filesize), OCT); #endif /* * check name size and if valid, read in the name of this entry (name * follows header in the archive) */ if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),OCT)) < 2) return(-1); arcn->nlen = nsz - 1; if (rd_nm(arcn, nsz) < 0) return(-1); if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) { /* * no link name to read for this file */ arcn->ln_nlen = 0; arcn->ln_name[0] = '\0'; return(com_rd(arcn)); } /* * check link name size and read in the link name. Link names are * stored like file data. */ if (rd_ln_nm(arcn) < 0) return(-1); /* * we have a valid header (with a link) */ return(com_rd(arcn)); } /* * cpio_endrd() * no cleanup needed here, just return size of the trailer (for append) * Return: * size of trailer header in this format */ off_t cpio_endrd(void) { return((off_t)(sizeof(HD_CPIO) + sizeof(TRAILER))); } /* * cpio_stwr() * start up the device mapping table * Return: * 0 if ok, -1 otherwise (what dev_start() returns) */ int cpio_stwr(void) { return(dev_start()); } /* * cpio_wr() * copy the data in the ARCHD to buffer in extended byte oriented cpio * format. * Return * 0 if file has data to be written after the header, 1 if file has NO * data to write after the header, -1 if archive write failed */ int cpio_wr(ARCHD *arcn) { HD_CPIO *hd; int nsz; char hdblk[sizeof(HD_CPIO)]; /* * check and repair truncated device and inode fields in the header */ if (map_dev(arcn, (u_long)CPIO_MASK, (u_long)CPIO_MASK) < 0) return(-1); arcn->pad = 0L; nsz = arcn->nlen + 1; hd = (HD_CPIO *)hdblk; if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR)) arcn->sb.st_rdev = 0; switch(arcn->type) { case PAX_CTG: case PAX_REG: case PAX_HRG: /* * set data size for file data */ # ifdef NET2_STAT if (ul_asc((u_long)arcn->sb.st_size, hd->c_filesize, sizeof(hd->c_filesize), OCT)) { # else if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize, sizeof(hd->c_filesize), OCT)) { # endif paxwarn(1,"File is too large for cpio format %s", arcn->org_name); return(1); } break; case PAX_SLK: /* * set data size to hold link name */ if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize, sizeof(hd->c_filesize), OCT)) goto out; break; default: /* * all other file types have no file data */ if (ul_asc((u_long)0, hd->c_filesize, sizeof(hd->c_filesize), OCT)) goto out; break; } /* * copy the values to the header using octal ascii */ if (ul_asc((u_long)MAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) || ul_asc((u_long)arcn->sb.st_dev, hd->c_dev, sizeof(hd->c_dev), OCT) || ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino), OCT) || ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode), OCT) || ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid), OCT) || ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid), OCT) || ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink), OCT) || ul_asc((u_long)arcn->sb.st_rdev, hd->c_rdev, sizeof(hd->c_rdev), OCT) || ul_asc((u_long)arcn->sb.st_mtime,hd->c_mtime,sizeof(hd->c_mtime), OCT) || ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), OCT)) goto out; /* * write the file name to the archive */ if ((wr_rdbuf(hdblk, (int)sizeof(HD_CPIO)) < 0) || (wr_rdbuf(arcn->name, nsz) < 0)) { paxwarn(1, "Unable to write cpio header for %s", arcn->org_name); return(-1); } /* * if this file has data, we are done. The caller will write the file * data, if we are link tell caller we are done, go to next file */ if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) || (arcn->type == PAX_HRG)) return(0); if (arcn->type != PAX_SLK) return(1); /* * write the link name to the archive, tell the caller to go to the * next file as we are done. */ if (wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) { paxwarn(1,"Unable to write cpio link name for %s",arcn->org_name); return(-1); } return(1); out: /* * header field is out of range */ paxwarn(1, "Cpio header field is too small to store file %s", arcn->org_name); return(1); } /* * Routines common to the system VR4 version of cpio (with/without file CRC) */ /* * vcpio_id() * determine if a block given to us is a valid system VR4 cpio header * WITHOUT crc. WATCH it the magic cookies are in OCTAL, the header * uses HEX * Return: * 0 if a valid header, -1 otherwise */ int vcpio_id(char *blk, int size) { if ((size < (int)sizeof(HD_VCPIO)) || (strncmp(blk, AVMAGIC, sizeof(AVMAGIC) - 1) != 0)) return(-1); return(0); } /* * crc_id() * determine if a block given to us is a valid system VR4 cpio header * WITH crc. WATCH it the magic cookies are in OCTAL the header uses HEX * Return: * 0 if a valid header, -1 otherwise */ int crc_id(char *blk, int size) { if ((size < (int)sizeof(HD_VCPIO)) || (strncmp(blk, AVCMAGIC, (int)sizeof(AVCMAGIC) - 1) != 0)) return(-1); return(0); } /* * crc_strd() w set file data CRC calculations. Fire up the hard link detection code * Return: * 0 if ok -1 otherwise (the return values of lnk_start()) */ int crc_strd(void) { docrc = 1; return(lnk_start()); } /* * vcpio_rd() * determine if a buffer is a system VR4 archive entry. (with/without CRC) * convert and store the values in the ARCHD parameter. * Return: * 0 if a valid header, -1 otherwise. */ int vcpio_rd(ARCHD *arcn, char *buf) { HD_VCPIO *hd; dev_t devminor; dev_t devmajor; int nsz; /* * during the id phase it was determined if we were using CRC, use the * proper id routine. */ if (docrc) { if (crc_id(buf, sizeof(HD_VCPIO)) < 0) return(-1); } else { if (vcpio_id(buf, sizeof(HD_VCPIO)) < 0) return(-1); } hd = (HD_VCPIO *)buf; arcn->pad = 0L; /* * extract the hex ascii fields from the header */ arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), HEX); arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), HEX); arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), HEX); arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), HEX); #ifdef NET2_STAT arcn->sb.st_mtime = (time_t)asc_ul(hd->c_mtime,sizeof(hd->c_mtime),HEX); #else arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime,sizeof(hd->c_mtime),HEX); #endif arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime; #ifdef NET2_STAT arcn->sb.st_size = (off_t)asc_ul(hd->c_filesize, sizeof(hd->c_filesize), HEX); #else arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize, sizeof(hd->c_filesize), HEX); #endif arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink), HEX); devmajor = (dev_t)asc_ul(hd->c_maj, sizeof(hd->c_maj), HEX); devminor = (dev_t)asc_ul(hd->c_min, sizeof(hd->c_min), HEX); arcn->sb.st_dev = TODEV(devmajor, devminor); devmajor = (dev_t)asc_ul(hd->c_rmaj, sizeof(hd->c_maj), HEX); devminor = (dev_t)asc_ul(hd->c_rmin, sizeof(hd->c_min), HEX); arcn->sb.st_rdev = TODEV(devmajor, devminor); arcn->crc = asc_ul(hd->c_chksum, sizeof(hd->c_chksum), HEX); /* * check the length of the file name, if ok read it in, return -1 if * bogus */ if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),HEX)) < 2) return(-1); arcn->nlen = nsz - 1; if (rd_nm(arcn, nsz) < 0) return(-1); /* * skip padding. header + filename is aligned to 4 byte boundries */ if (rd_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0) return(-1); /* * if not a link (or a file with no data), calculate pad size (for * padding which follows the file data), clear the link name and return */ if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) { /* * we have a valid header (not a link) */ arcn->ln_nlen = 0; arcn->ln_name[0] = '\0'; arcn->pad = VCPIO_PAD(arcn->sb.st_size); return(com_rd(arcn)); } /* * read in the link name and skip over the padding */ if ((rd_ln_nm(arcn) < 0) || (rd_skip((off_t)(VCPIO_PAD(arcn->sb.st_size))) < 0)) return(-1); /* * we have a valid header (with a link) */ return(com_rd(arcn)); } /* * vcpio_endrd() * no cleanup needed here, just return size of the trailer (for append) * Return: * size of trailer header in this format */ off_t vcpio_endrd(void) { return((off_t)(sizeof(HD_VCPIO) + sizeof(TRAILER) + (VCPIO_PAD(sizeof(HD_VCPIO) + sizeof(TRAILER))))); } /* * crc_stwr() * start up the device mapping table, enable crc file calculation * Return: * 0 if ok, -1 otherwise (what dev_start() returns) */ int crc_stwr(void) { docrc = 1; return(dev_start()); } /* * vcpio_wr() * copy the data in the ARCHD to buffer in system VR4 cpio * (with/without crc) format. * Return * 0 if file has data to be written after the header, 1 if file has * NO data to write after the header, -1 if archive write failed */ int vcpio_wr(ARCHD *arcn) { HD_VCPIO *hd; unsigned int nsz; char hdblk[sizeof(HD_VCPIO)]; /* * check and repair truncated device and inode fields in the cpio * header */ if (map_dev(arcn, (u_long)VCPIO_MASK, (u_long)VCPIO_MASK) < 0) return(-1); nsz = arcn->nlen + 1; hd = (HD_VCPIO *)hdblk; if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR)) arcn->sb.st_rdev = 0; /* * add the proper magic value depending whether we were asked for * file data crc's, and the crc if needed. */ if (docrc) { if (ul_asc((u_long)VCMAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) || ul_asc((u_long)arcn->crc,hd->c_chksum,sizeof(hd->c_chksum), HEX)) goto out; } else { if (ul_asc((u_long)VMAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) || ul_asc((u_long)0L, hd->c_chksum, sizeof(hd->c_chksum),HEX)) goto out; } switch(arcn->type) { case PAX_CTG: case PAX_REG: case PAX_HRG: /* * caller will copy file data to the archive. tell him how * much to pad. */ arcn->pad = VCPIO_PAD(arcn->sb.st_size); # ifdef NET2_STAT if (ul_asc((u_long)arcn->sb.st_size, hd->c_filesize, sizeof(hd->c_filesize), HEX)) { # else if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize, sizeof(hd->c_filesize), HEX)) { # endif paxwarn(1,"File is too large for sv4cpio format %s", arcn->org_name); return(1); } break; case PAX_SLK: /* * no file data for the caller to process, the file data has * the size of the link */ arcn->pad = 0L; if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize, sizeof(hd->c_filesize), HEX)) goto out; break; default: /* * no file data for the caller to process */ arcn->pad = 0L; if (ul_asc((u_long)0L, hd->c_filesize, sizeof(hd->c_filesize), HEX)) goto out; break; } /* * set the other fields in the header */ if (ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino), HEX) || ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode), HEX) || ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid), HEX) || ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid), HEX) || ul_asc((u_long)arcn->sb.st_mtime, hd->c_mtime, sizeof(hd->c_mtime), HEX) || ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink), HEX) || ul_asc((u_long)MAJOR(arcn->sb.st_dev),hd->c_maj, sizeof(hd->c_maj), HEX) || ul_asc((u_long)MINOR(arcn->sb.st_dev),hd->c_min, sizeof(hd->c_min), HEX) || ul_asc((u_long)MAJOR(arcn->sb.st_rdev),hd->c_rmaj,sizeof(hd->c_maj), HEX) || ul_asc((u_long)MINOR(arcn->sb.st_rdev),hd->c_rmin,sizeof(hd->c_min), HEX) || ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), HEX)) goto out; /* * write the header, the file name and padding as required. */ if ((wr_rdbuf(hdblk, (int)sizeof(HD_VCPIO)) < 0) || (wr_rdbuf(arcn->name, (int)nsz) < 0) || (wr_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)) { paxwarn(1,"Could not write sv4cpio header for %s",arcn->org_name); return(-1); } /* * if we have file data, tell the caller we are done, copy the file */ if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) || (arcn->type == PAX_HRG)) return(0); /* * if we are not a link, tell the caller we are done, go to next file */ if (arcn->type != PAX_SLK) return(1); /* * write the link name, tell the caller we are done. */ if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) || (wr_skip((off_t)(VCPIO_PAD(arcn->ln_nlen))) < 0)) { paxwarn(1,"Could not write sv4cpio link name for %s", arcn->org_name); return(-1); } return(1); out: /* * header field is out of range */ paxwarn(1,"Sv4cpio header field is too small for file %s",arcn->org_name); return(1); } /* * Routines common to the old binary header cpio */ /* * bcpio_id() * determine if a block given to us is an old binary cpio header * (with/without header byte swapping) * Return: * 0 if a valid header, -1 otherwise */ int bcpio_id(char *blk, int size) { if (size < (int)sizeof(HD_BCPIO)) return(-1); /* * check both normal and byte swapped magic cookies */ if (((u_short)SHRT_EXT(blk)) == MAGIC) return(0); if (((u_short)RSHRT_EXT(blk)) == MAGIC) { if (!swp_head) ++swp_head; return(0); } return(-1); } /* * bcpio_rd() * determine if a buffer is an old binary archive entry. (It may have byte * swapped header) convert and store the values in the ARCHD parameter. * This is a very old header format and should not really be used. * Return: * 0 if a valid header, -1 otherwise. */ int bcpio_rd(ARCHD *arcn, char *buf) { HD_BCPIO *hd; int nsz; /* * check the header */ if (bcpio_id(buf, sizeof(HD_BCPIO)) < 0) return(-1); arcn->pad = 0L; hd = (HD_BCPIO *)buf; if (swp_head) { /* * header has swapped bytes on 16 bit boundaries */ arcn->sb.st_dev = (dev_t)(RSHRT_EXT(hd->h_dev)); arcn->sb.st_ino = (ino_t)(RSHRT_EXT(hd->h_ino)); arcn->sb.st_mode = (mode_t)(RSHRT_EXT(hd->h_mode)); arcn->sb.st_uid = (uid_t)(RSHRT_EXT(hd->h_uid)); arcn->sb.st_gid = (gid_t)(RSHRT_EXT(hd->h_gid)); arcn->sb.st_nlink = (nlink_t)(RSHRT_EXT(hd->h_nlink)); arcn->sb.st_rdev = (dev_t)(RSHRT_EXT(hd->h_rdev)); arcn->sb.st_mtime = (time_t)(RSHRT_EXT(hd->h_mtime_1)); arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) | ((time_t)(RSHRT_EXT(hd->h_mtime_2))); arcn->sb.st_size = (off_t)(RSHRT_EXT(hd->h_filesize_1)); arcn->sb.st_size = (arcn->sb.st_size << 16) | ((off_t)(RSHRT_EXT(hd->h_filesize_2))); nsz = (int)(RSHRT_EXT(hd->h_namesize)); } else { arcn->sb.st_dev = (dev_t)(SHRT_EXT(hd->h_dev)); arcn->sb.st_ino = (ino_t)(SHRT_EXT(hd->h_ino)); arcn->sb.st_mode = (mode_t)(SHRT_EXT(hd->h_mode)); arcn->sb.st_uid = (uid_t)(SHRT_EXT(hd->h_uid)); arcn->sb.st_gid = (gid_t)(SHRT_EXT(hd->h_gid)); arcn->sb.st_nlink = (nlink_t)(SHRT_EXT(hd->h_nlink)); arcn->sb.st_rdev = (dev_t)(SHRT_EXT(hd->h_rdev)); arcn->sb.st_mtime = (time_t)(SHRT_EXT(hd->h_mtime_1)); arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) | ((time_t)(SHRT_EXT(hd->h_mtime_2))); arcn->sb.st_size = (off_t)(SHRT_EXT(hd->h_filesize_1)); arcn->sb.st_size = (arcn->sb.st_size << 16) | ((off_t)(SHRT_EXT(hd->h_filesize_2))); nsz = (int)(SHRT_EXT(hd->h_namesize)); } arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime; /* * check the file name size, if bogus give up. otherwise read the file * name */ if (nsz < 2) return(-1); arcn->nlen = nsz - 1; if (rd_nm(arcn, nsz) < 0) return(-1); /* * header + file name are aligned to 2 byte boundries, skip if needed */ if (rd_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0) return(-1); /* * if not a link (or a file with no data), calculate pad size (for * padding which follows the file data), clear the link name and return */ if (((arcn->sb.st_mode & C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)){ /* * we have a valid header (not a link) */ arcn->ln_nlen = 0; arcn->ln_name[0] = '\0'; arcn->pad = BCPIO_PAD(arcn->sb.st_size); return(com_rd(arcn)); } if ((rd_ln_nm(arcn) < 0) || (rd_skip((off_t)(BCPIO_PAD(arcn->sb.st_size))) < 0)) return(-1); /* * we have a valid header (with a link) */ return(com_rd(arcn)); } /* * bcpio_endrd() * no cleanup needed here, just return size of the trailer (for append) * Return: * size of trailer header in this format */ off_t bcpio_endrd(void) { return((off_t)(sizeof(HD_BCPIO) + sizeof(TRAILER) + (BCPIO_PAD(sizeof(HD_BCPIO) + sizeof(TRAILER))))); } /* * bcpio_wr() * copy the data in the ARCHD to buffer in old binary cpio format * There is a real chance of field overflow with this critter. So we * always check the conversion is ok. nobody in his their right mind * should write an achive in this format... * Return * 0 if file has data to be written after the header, 1 if file has NO * data to write after the header, -1 if archive write failed */ int bcpio_wr(ARCHD *arcn) { HD_BCPIO *hd; int nsz; char hdblk[sizeof(HD_BCPIO)]; off_t t_offt; int t_int; time_t t_timet; /* * check and repair truncated device and inode fields in the cpio * header */ if (map_dev(arcn, (u_long)BCPIO_MASK, (u_long)BCPIO_MASK) < 0) return(-1); if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR)) arcn->sb.st_rdev = 0; hd = (HD_BCPIO *)hdblk; switch(arcn->type) { case PAX_CTG: case PAX_REG: case PAX_HRG: /* * caller will copy file data to the archive. tell him how * much to pad. */ arcn->pad = BCPIO_PAD(arcn->sb.st_size); hd->h_filesize_1[0] = CHR_WR_0(arcn->sb.st_size); hd->h_filesize_1[1] = CHR_WR_1(arcn->sb.st_size); hd->h_filesize_2[0] = CHR_WR_2(arcn->sb.st_size); hd->h_filesize_2[1] = CHR_WR_3(arcn->sb.st_size); t_offt = (off_t)(SHRT_EXT(hd->h_filesize_1)); t_offt = (t_offt<<16) | ((off_t)(SHRT_EXT(hd->h_filesize_2))); if (arcn->sb.st_size != t_offt) { paxwarn(1,"File is too large for bcpio format %s", arcn->org_name); return(1); } break; case PAX_SLK: /* * no file data for the caller to process, the file data has * the size of the link */ arcn->pad = 0L; hd->h_filesize_1[0] = CHR_WR_0(arcn->ln_nlen); hd->h_filesize_1[1] = CHR_WR_1(arcn->ln_nlen); hd->h_filesize_2[0] = CHR_WR_2(arcn->ln_nlen); hd->h_filesize_2[1] = CHR_WR_3(arcn->ln_nlen); t_int = (int)(SHRT_EXT(hd->h_filesize_1)); t_int = (t_int << 16) | ((int)(SHRT_EXT(hd->h_filesize_2))); if (arcn->ln_nlen != t_int) goto out; break; default: /* * no file data for the caller to process */ arcn->pad = 0L; hd->h_filesize_1[0] = (char)0; hd->h_filesize_1[1] = (char)0; hd->h_filesize_2[0] = (char)0; hd->h_filesize_2[1] = (char)0; break; } /* * build up the rest of the fields */ hd->h_magic[0] = CHR_WR_2(MAGIC); hd->h_magic[1] = CHR_WR_3(MAGIC); hd->h_dev[0] = CHR_WR_2(arcn->sb.st_dev); hd->h_dev[1] = CHR_WR_3(arcn->sb.st_dev); if (arcn->sb.st_dev != (dev_t)(SHRT_EXT(hd->h_dev))) goto out; hd->h_ino[0] = CHR_WR_2(arcn->sb.st_ino); hd->h_ino[1] = CHR_WR_3(arcn->sb.st_ino); if (arcn->sb.st_ino != (ino_t)(SHRT_EXT(hd->h_ino))) goto out; hd->h_mode[0] = CHR_WR_2(arcn->sb.st_mode); hd->h_mode[1] = CHR_WR_3(arcn->sb.st_mode); if (arcn->sb.st_mode != (mode_t)(SHRT_EXT(hd->h_mode))) goto out; hd->h_uid[0] = CHR_WR_2(arcn->sb.st_uid); hd->h_uid[1] = CHR_WR_3(arcn->sb.st_uid); if (arcn->sb.st_uid != (uid_t)(SHRT_EXT(hd->h_uid))) goto out; hd->h_gid[0] = CHR_WR_2(arcn->sb.st_gid); hd->h_gid[1] = CHR_WR_3(arcn->sb.st_gid); if (arcn->sb.st_gid != (gid_t)(SHRT_EXT(hd->h_gid))) goto out; hd->h_nlink[0] = CHR_WR_2(arcn->sb.st_nlink); hd->h_nlink[1] = CHR_WR_3(arcn->sb.st_nlink); if (arcn->sb.st_nlink != (nlink_t)(SHRT_EXT(hd->h_nlink))) goto out; hd->h_rdev[0] = CHR_WR_2(arcn->sb.st_rdev); hd->h_rdev[1] = CHR_WR_3(arcn->sb.st_rdev); if (arcn->sb.st_rdev != (dev_t)(SHRT_EXT(hd->h_rdev))) goto out; hd->h_mtime_1[0] = CHR_WR_0(arcn->sb.st_mtime); hd->h_mtime_1[1] = CHR_WR_1(arcn->sb.st_mtime); hd->h_mtime_2[0] = CHR_WR_2(arcn->sb.st_mtime); hd->h_mtime_2[1] = CHR_WR_3(arcn->sb.st_mtime); t_timet = (time_t)(SHRT_EXT(hd->h_mtime_1)); t_timet = (t_timet << 16) | ((time_t)(SHRT_EXT(hd->h_mtime_2))); if (arcn->sb.st_mtime != t_timet) goto out; nsz = arcn->nlen + 1; hd->h_namesize[0] = CHR_WR_2(nsz); hd->h_namesize[1] = CHR_WR_3(nsz); if (nsz != (int)(SHRT_EXT(hd->h_namesize))) goto out; /* * write the header, the file name and padding as required. */ if ((wr_rdbuf(hdblk, (int)sizeof(HD_BCPIO)) < 0) || (wr_rdbuf(arcn->name, nsz) < 0) || (wr_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)) { paxwarn(1, "Could not write bcpio header for %s", arcn->org_name); return(-1); } /* * if we have file data, tell the caller we are done */ if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) || (arcn->type == PAX_HRG)) return(0); /* * if we are not a link, tell the caller we are done, go to next file */ if (arcn->type != PAX_SLK) return(1); /* * write the link name, tell the caller we are done. */ if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) || (wr_skip((off_t)(BCPIO_PAD(arcn->ln_nlen))) < 0)) { paxwarn(1,"Could not write bcpio link name for %s",arcn->org_name); return(-1); } return(1); out: /* * header field is out of range */ paxwarn(1,"Bcpio header field is too small for file %s", arcn->org_name); return(1); }