From d2168fe021bd1693c1038503e09d3d74dd8b6f36 Mon Sep 17 00:00:00 2001 From: charnier Date: Sun, 14 Jul 2002 14:47:15 +0000 Subject: The .Nm utility --- usr.sbin/wlconfig/wlconfig.8 | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'usr.sbin/wlconfig/wlconfig.8') diff --git a/usr.sbin/wlconfig/wlconfig.8 b/usr.sbin/wlconfig/wlconfig.8 index cfbd4b3..106732d 100644 --- a/usr.sbin/wlconfig/wlconfig.8 +++ b/usr.sbin/wlconfig/wlconfig.8 @@ -13,7 +13,7 @@ .Sh DESCRIPTION The .Nm -command can be used to read and set parameters for the NCR/AT&T Wavelan +utility can be used to read and set parameters for the NCR/AT&T Wavelan radio LAN card. Various parameters stored in the non-volatile Parameter Storage Area (PSA) on the card can be modified with this program, replacing the DOS-based @@ -88,7 +88,7 @@ which clears out the cache in case you want to store new samples. Note that if the IRQ on the Wavelan card is incorrect, the interface will be configured, but will not function. The .Nm -program should then be used to reconfigure the card to a sensible +utility should then be used to reconfigure the card to a sensible value. .Sh EXAMPLES Set the NWID to 0x1234: @@ -132,7 +132,7 @@ Print a scaled version of the signal strength cache: .Sh HISTORY This implementation of the .Nm -command is completely new, written for Hilink Internet by +utility is completely new, written for Hilink Internet by .An Michael Smith , and updated by .An Jim Binkley &c . -- cgit v1.1