From bb7686bc5d8502daf5555b4de12d8a81926fb13a Mon Sep 17 00:00:00 2001
From: rgrimes <rgrimes@FreeBSD.org>
Date: Sat, 28 Aug 1993 03:08:59 +0000
Subject: Revised drivers from Julian.  Support for generic scsi.  Fixed scsi
 tape (st.c) problems with respect to multiple tar files on one tape.  Now
 uses malloc of data structures to reduce static kernel size.

---
 sys/scsi/scsiconf.h | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

(limited to 'sys/scsi/scsiconf.h')

diff --git a/sys/scsi/scsiconf.h b/sys/scsi/scsiconf.h
index 004787e..b0b45ef 100644
--- a/sys/scsi/scsiconf.h
+++ b/sys/scsi/scsiconf.h
@@ -14,7 +14,7 @@
  *
  * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
  *
- *	$Id$
+ *	$Id: scsiconf.h,v 1.3 93/08/26 21:09:43 julian Exp Locker: julian $
  */
 
 /***********************************************\
@@ -24,18 +24,18 @@
 \***********************************************/
 struct scsi_switch
 {
-	char		*name; /* name of scsi bus controller */
 	int		(*scsi_cmd)();
 	void		(*scsi_minphys)();
 	int		(*open_target_lu)();
 	int		(*close_target_lu)();
 	long	int	(*adapter_info)(); /* see definitions below */
-	u_long	spare[3];
+	char		*name; /* name of scsi bus controller */
+	u_long	spare[2];
 };
 #define	AD_INF_MAX_CMDS		0x000000FF /* maximum number of entries
 						queuable to a device by 
 						the adapter */
-/* 24 bits of other adapter charcteristics go here */
+/* 24 bits of other adapter characteristics go here */
 
 /***********************************************\
 * The scsi debug control bits			*
@@ -57,6 +57,7 @@ extern	int	scsi_debug;
 #define TRY_AGAIN_LATER		1
 #define	COMPLETE		2
 #define	HAD_ERROR		3
+#define	ESCAPE_NOT_SUPPORTED	4
 
 struct scsi_xfer
 {
@@ -78,6 +79,13 @@ struct scsi_xfer
 	int	error;
 	struct	buf *bp;
 	struct	scsi_sense_data	sense;
+
+	/* Believe it or not, Some targets fall on the ground with
+	 * anything but a certain sense length.
+	 */
+	int req_sense_length;	/* Explicit request sense length */
+
+	int status;		/* SCSI status */
 };
 /********************************/
 /* Flag values			*/
@@ -94,6 +102,17 @@ struct scsi_xfer
 #define	SCSI_DATA_IN	0x400	/* expect data to come INTO memory	*/
 #define	SCSI_DATA_OUT	0x800	/* expect data to flow OUT of memory	*/
 #define	SCSI_TARGET	0x1000	/* This defines a TARGET mode op.	*/
+#define	SCSI_ESCAPE	0x2000	/* Escape operation			*/
+
+/*************************************************************************/
+/* Escape op codes.  This provides an extensible setup for operations    */
+/* that are not scsi commands.  They are intended for modal operations.  */
+/*************************************************************************/
+
+#define SCSI_OP_TARGET	0x0001
+#define	SCSI_OP_RESET	0x0002
+#define	SCSI_OP_BDINFO	0x0003
+
 /********************************/
 /* Error values			*/
 /********************************/
-- 
cgit v1.1