From d314c28e74fad228397fe7016c254f0b7863f0d5 Mon Sep 17 00:00:00 2001 From: wpaul Date: Wed, 21 Feb 2001 20:54:22 +0000 Subject: Big round of minor updates: - Use pci_get_powerstate()/pci_set_powerstate() in all the other drivers that need them so we don't have to fiddle with the PCI power management registers directly. - Use pci_enable_busmaster()/pci_enable_io() to turn on busmastering and PIO/memory mapped accesses. - Add support to the RealTek driver for the D-Link DFE-530TX+ which has a RealTek 8139 with its own PCI ID. (Submitted by Jason Wright) - Have the SiS 900/National DP83815 driver be sure to disable PME mode in sis_reset(). This apparently fixes a problem on some motherboards where the DP83815 chip fails to receive packets. (Submitted by Chuck McCrobie ) --- sys/pci/if_vr.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) (limited to 'sys/pci/if_vr.c') diff --git a/sys/pci/if_vr.c b/sys/pci/if_vr.c index 0f44a1d..9c6591b 100644 --- a/sys/pci/if_vr.c +++ b/sys/pci/if_vr.c @@ -648,38 +648,32 @@ static int vr_attach(dev) /* * Handle power management nonsense. */ + if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { + u_int32_t iobase, membase, irq; - command = pci_read_config(dev, VR_PCI_CAPID, 4) & 0x000000FF; - if (command == 0x01) { + /* Save important PCI config data. */ + iobase = pci_read_config(dev, VR_PCI_LOIO, 4); + membase = pci_read_config(dev, VR_PCI_LOMEM, 4); + irq = pci_read_config(dev, VR_PCI_INTLINE, 4); - command = pci_read_config(dev, VR_PCI_PWRMGMTCTRL, 4); - if (command & VR_PSTATE_MASK) { - u_int32_t iobase, membase, irq; - - /* Save important PCI config data. */ - iobase = pci_read_config(dev, VR_PCI_LOIO, 4); - membase = pci_read_config(dev, VR_PCI_LOMEM, 4); - irq = pci_read_config(dev, VR_PCI_INTLINE, 4); - - /* Reset the power state. */ - printf("vr%d: chip is in D%d power mode " - "-- setting to D0\n", unit, command & VR_PSTATE_MASK); - command &= 0xFFFFFFFC; - pci_write_config(dev, VR_PCI_PWRMGMTCTRL, command, 4); + /* Reset the power state. */ + printf("vr%d: chip is in D%d power mode " + "-- setting to D0\n", unit, + pci_get_powerstate(dev)); + pci_set_powerstate(dev, PCI_POWERSTATE_D0); /* Restore PCI config data. */ - pci_write_config(dev, VR_PCI_LOIO, iobase, 4); - pci_write_config(dev, VR_PCI_LOMEM, membase, 4); - pci_write_config(dev, VR_PCI_INTLINE, irq, 4); - } + pci_write_config(dev, VR_PCI_LOIO, iobase, 4); + pci_write_config(dev, VR_PCI_LOMEM, membase, 4); + pci_write_config(dev, VR_PCI_INTLINE, irq, 4); } /* * Map control/status registers. */ - command = pci_read_config(dev, PCIR_COMMAND, 4); - command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN); - pci_write_config(dev, PCIR_COMMAND, command, 4); + pci_enable_busmaster(dev); + pci_enable_io(dev, PCIM_CMD_PORTEN); + pci_enable_io(dev, PCIM_CMD_MEMEN); command = pci_read_config(dev, PCIR_COMMAND, 4); #ifdef VR_USEIOSPACE -- cgit v1.1