From 937fbbdfd45bc7b0b66ef67106d8294d97bdde87 Mon Sep 17 00:00:00 2001 From: nyan Date: Sun, 5 Oct 2003 08:56:49 +0000 Subject: MFi386: revision 1.205 --- sys/pc98/cbus/clock.c | 147 +++++++++++++++++++++++++++++++++++++++++++++++++- sys/pc98/cbus/pcrtc.c | 147 +++++++++++++++++++++++++++++++++++++++++++++++++- sys/pc98/pc98/clock.c | 147 +++++++++++++++++++++++++++++++++++++++++++++++++- 3 files changed, 438 insertions(+), 3 deletions(-) (limited to 'sys/pc98') diff --git a/sys/pc98/cbus/clock.c b/sys/pc98/cbus/clock.c index bc4cf6b..3724de0 100644 --- a/sys/pc98/cbus/clock.c +++ b/sys/pc98/cbus/clock.c @@ -111,6 +111,23 @@ static void setup_8254_mixed_mode(void); #define TIMER_DIV(x) ((timer_freq + (x) / 2) / (x)) +#ifndef BURN_BRIDGES +/* + * Time in timer cycles that it takes for microtime() to disable interrupts + * and latch the count. microtime() currently uses "cli; outb ..." so it + * normally takes less than 2 timer cycles. Add a few for cache misses. + * Add a few more to allow for latency in bogus calls to microtime() with + * interrupts already disabled. + */ +#define TIMER0_LATCH_COUNT 20 + +/* + * Maximum frequency that we are willing to allow for timer0. Must be + * low enough to guarantee that the timer interrupt handler returns + * before the next timer interrupt. + */ +#define TIMER0_MAX_FREQ 20000 +#endif int adjkerntz; /* local offset from GMT in seconds */ int clkintr_pending; @@ -132,7 +149,18 @@ static u_int hardclock_max_count; static u_int32_t i8254_lastcount; static u_int32_t i8254_offset; static int i8254_ticked; - +#ifndef BURN_BRIDGES +/* + * XXX new_function and timer_func should not handle clockframes, but + * timer_func currently needs to hold hardclock to handle the + * timer0_state == 0 case. We should use inthand_add()/inthand_remove() + * to switch between clkintr() and a slightly different timerintr(). + */ +static void (*new_function)(struct clockframe *frame); +static u_int new_rate; +static u_int timer0_prescaler_count; +static u_char timer0_state; +#endif /* Values for timerX_state: */ #define RELEASED 0 @@ -180,8 +208,99 @@ clkintr(struct clockframe frame) if (timer_func == hardclock) forward_hardclock(); #endif +#ifndef BURN_BRIDGES + switch (timer0_state) { + + case RELEASED: + break; + + case ACQUIRED: + if ((timer0_prescaler_count += timer0_max_count) + >= hardclock_max_count) { + timer0_prescaler_count -= hardclock_max_count; + hardclock(&frame); +#ifdef SMP + forward_hardclock(); +#endif + } + break; + + case ACQUIRE_PENDING: + mtx_lock_spin(&clock_lock); + i8254_offset = i8254_get_timecount(NULL); + i8254_lastcount = 0; + timer0_max_count = TIMER_DIV(new_rate); + outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); + outb(TIMER_CNTR0, timer0_max_count & 0xff); + outb(TIMER_CNTR0, timer0_max_count >> 8); + mtx_unlock_spin(&clock_lock); + timer_func = new_function; + timer0_state = ACQUIRED; + break; + + case RELEASE_PENDING: + if ((timer0_prescaler_count += timer0_max_count) + >= hardclock_max_count) { + mtx_lock_spin(&clock_lock); + i8254_offset = i8254_get_timecount(NULL); + i8254_lastcount = 0; + timer0_max_count = hardclock_max_count; + outb(TIMER_MODE, + TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); + outb(TIMER_CNTR0, timer0_max_count & 0xff); + outb(TIMER_CNTR0, timer0_max_count >> 8); + mtx_unlock_spin(&clock_lock); + timer0_prescaler_count = 0; + timer_func = hardclock; + timer0_state = RELEASED; + hardclock(&frame); +#ifdef SMP + forward_hardclock(); +#endif + } + break; + } +#endif } +#ifndef BURN_BRIDGES +/* + * The acquire and release functions must be called at ipl >= splclock(). + */ +int +acquire_timer0(int rate, void (*function)(struct clockframe *frame)) +{ + static int old_rate; + + if (rate <= 0 || rate > TIMER0_MAX_FREQ) + return (-1); + switch (timer0_state) { + + case RELEASED: + timer0_state = ACQUIRE_PENDING; + break; + + case RELEASE_PENDING: + if (rate != old_rate) + return (-1); + /* + * The timer has been released recently, but is being + * re-acquired before the release completed. In this + * case, we simply reclaim it as if it had not been + * released at all. + */ + timer0_state = ACQUIRED; + break; + + default: + return (-1); /* busy */ + } + new_function = function; + old_rate = new_rate = rate; + return (0); +} +#endif + int acquire_timer1(int mode) { @@ -222,6 +341,28 @@ acquire_timer2(int mode) return (0); } +#ifndef BURN_BRIDGES +int +release_timer0() +{ + switch (timer0_state) { + + case ACQUIRED: + timer0_state = RELEASE_PENDING; + break; + + case ACQUIRE_PENDING: + /* Nothing happened yet, release quickly. */ + timer0_state = RELEASED; + break; + + default: + return (-1); + } + return (0); +} +#endif + int release_timer1() { @@ -937,6 +1078,10 @@ sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS) freq = timer_freq; error = sysctl_handle_int(oidp, &freq, sizeof(freq), req); if (error == 0 && req->newptr != NULL) { +#ifndef BURN_BRIDGES + if (timer0_state != RELEASED) + return (EBUSY); /* too much trouble to handle */ +#endif set_timer_freq(freq, hz); i8254_timecounter.tc_frequency = freq; } diff --git a/sys/pc98/cbus/pcrtc.c b/sys/pc98/cbus/pcrtc.c index bc4cf6b..3724de0 100644 --- a/sys/pc98/cbus/pcrtc.c +++ b/sys/pc98/cbus/pcrtc.c @@ -111,6 +111,23 @@ static void setup_8254_mixed_mode(void); #define TIMER_DIV(x) ((timer_freq + (x) / 2) / (x)) +#ifndef BURN_BRIDGES +/* + * Time in timer cycles that it takes for microtime() to disable interrupts + * and latch the count. microtime() currently uses "cli; outb ..." so it + * normally takes less than 2 timer cycles. Add a few for cache misses. + * Add a few more to allow for latency in bogus calls to microtime() with + * interrupts already disabled. + */ +#define TIMER0_LATCH_COUNT 20 + +/* + * Maximum frequency that we are willing to allow for timer0. Must be + * low enough to guarantee that the timer interrupt handler returns + * before the next timer interrupt. + */ +#define TIMER0_MAX_FREQ 20000 +#endif int adjkerntz; /* local offset from GMT in seconds */ int clkintr_pending; @@ -132,7 +149,18 @@ static u_int hardclock_max_count; static u_int32_t i8254_lastcount; static u_int32_t i8254_offset; static int i8254_ticked; - +#ifndef BURN_BRIDGES +/* + * XXX new_function and timer_func should not handle clockframes, but + * timer_func currently needs to hold hardclock to handle the + * timer0_state == 0 case. We should use inthand_add()/inthand_remove() + * to switch between clkintr() and a slightly different timerintr(). + */ +static void (*new_function)(struct clockframe *frame); +static u_int new_rate; +static u_int timer0_prescaler_count; +static u_char timer0_state; +#endif /* Values for timerX_state: */ #define RELEASED 0 @@ -180,8 +208,99 @@ clkintr(struct clockframe frame) if (timer_func == hardclock) forward_hardclock(); #endif +#ifndef BURN_BRIDGES + switch (timer0_state) { + + case RELEASED: + break; + + case ACQUIRED: + if ((timer0_prescaler_count += timer0_max_count) + >= hardclock_max_count) { + timer0_prescaler_count -= hardclock_max_count; + hardclock(&frame); +#ifdef SMP + forward_hardclock(); +#endif + } + break; + + case ACQUIRE_PENDING: + mtx_lock_spin(&clock_lock); + i8254_offset = i8254_get_timecount(NULL); + i8254_lastcount = 0; + timer0_max_count = TIMER_DIV(new_rate); + outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); + outb(TIMER_CNTR0, timer0_max_count & 0xff); + outb(TIMER_CNTR0, timer0_max_count >> 8); + mtx_unlock_spin(&clock_lock); + timer_func = new_function; + timer0_state = ACQUIRED; + break; + + case RELEASE_PENDING: + if ((timer0_prescaler_count += timer0_max_count) + >= hardclock_max_count) { + mtx_lock_spin(&clock_lock); + i8254_offset = i8254_get_timecount(NULL); + i8254_lastcount = 0; + timer0_max_count = hardclock_max_count; + outb(TIMER_MODE, + TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); + outb(TIMER_CNTR0, timer0_max_count & 0xff); + outb(TIMER_CNTR0, timer0_max_count >> 8); + mtx_unlock_spin(&clock_lock); + timer0_prescaler_count = 0; + timer_func = hardclock; + timer0_state = RELEASED; + hardclock(&frame); +#ifdef SMP + forward_hardclock(); +#endif + } + break; + } +#endif } +#ifndef BURN_BRIDGES +/* + * The acquire and release functions must be called at ipl >= splclock(). + */ +int +acquire_timer0(int rate, void (*function)(struct clockframe *frame)) +{ + static int old_rate; + + if (rate <= 0 || rate > TIMER0_MAX_FREQ) + return (-1); + switch (timer0_state) { + + case RELEASED: + timer0_state = ACQUIRE_PENDING; + break; + + case RELEASE_PENDING: + if (rate != old_rate) + return (-1); + /* + * The timer has been released recently, but is being + * re-acquired before the release completed. In this + * case, we simply reclaim it as if it had not been + * released at all. + */ + timer0_state = ACQUIRED; + break; + + default: + return (-1); /* busy */ + } + new_function = function; + old_rate = new_rate = rate; + return (0); +} +#endif + int acquire_timer1(int mode) { @@ -222,6 +341,28 @@ acquire_timer2(int mode) return (0); } +#ifndef BURN_BRIDGES +int +release_timer0() +{ + switch (timer0_state) { + + case ACQUIRED: + timer0_state = RELEASE_PENDING; + break; + + case ACQUIRE_PENDING: + /* Nothing happened yet, release quickly. */ + timer0_state = RELEASED; + break; + + default: + return (-1); + } + return (0); +} +#endif + int release_timer1() { @@ -937,6 +1078,10 @@ sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS) freq = timer_freq; error = sysctl_handle_int(oidp, &freq, sizeof(freq), req); if (error == 0 && req->newptr != NULL) { +#ifndef BURN_BRIDGES + if (timer0_state != RELEASED) + return (EBUSY); /* too much trouble to handle */ +#endif set_timer_freq(freq, hz); i8254_timecounter.tc_frequency = freq; } diff --git a/sys/pc98/pc98/clock.c b/sys/pc98/pc98/clock.c index bc4cf6b..3724de0 100644 --- a/sys/pc98/pc98/clock.c +++ b/sys/pc98/pc98/clock.c @@ -111,6 +111,23 @@ static void setup_8254_mixed_mode(void); #define TIMER_DIV(x) ((timer_freq + (x) / 2) / (x)) +#ifndef BURN_BRIDGES +/* + * Time in timer cycles that it takes for microtime() to disable interrupts + * and latch the count. microtime() currently uses "cli; outb ..." so it + * normally takes less than 2 timer cycles. Add a few for cache misses. + * Add a few more to allow for latency in bogus calls to microtime() with + * interrupts already disabled. + */ +#define TIMER0_LATCH_COUNT 20 + +/* + * Maximum frequency that we are willing to allow for timer0. Must be + * low enough to guarantee that the timer interrupt handler returns + * before the next timer interrupt. + */ +#define TIMER0_MAX_FREQ 20000 +#endif int adjkerntz; /* local offset from GMT in seconds */ int clkintr_pending; @@ -132,7 +149,18 @@ static u_int hardclock_max_count; static u_int32_t i8254_lastcount; static u_int32_t i8254_offset; static int i8254_ticked; - +#ifndef BURN_BRIDGES +/* + * XXX new_function and timer_func should not handle clockframes, but + * timer_func currently needs to hold hardclock to handle the + * timer0_state == 0 case. We should use inthand_add()/inthand_remove() + * to switch between clkintr() and a slightly different timerintr(). + */ +static void (*new_function)(struct clockframe *frame); +static u_int new_rate; +static u_int timer0_prescaler_count; +static u_char timer0_state; +#endif /* Values for timerX_state: */ #define RELEASED 0 @@ -180,8 +208,99 @@ clkintr(struct clockframe frame) if (timer_func == hardclock) forward_hardclock(); #endif +#ifndef BURN_BRIDGES + switch (timer0_state) { + + case RELEASED: + break; + + case ACQUIRED: + if ((timer0_prescaler_count += timer0_max_count) + >= hardclock_max_count) { + timer0_prescaler_count -= hardclock_max_count; + hardclock(&frame); +#ifdef SMP + forward_hardclock(); +#endif + } + break; + + case ACQUIRE_PENDING: + mtx_lock_spin(&clock_lock); + i8254_offset = i8254_get_timecount(NULL); + i8254_lastcount = 0; + timer0_max_count = TIMER_DIV(new_rate); + outb(TIMER_MODE, TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); + outb(TIMER_CNTR0, timer0_max_count & 0xff); + outb(TIMER_CNTR0, timer0_max_count >> 8); + mtx_unlock_spin(&clock_lock); + timer_func = new_function; + timer0_state = ACQUIRED; + break; + + case RELEASE_PENDING: + if ((timer0_prescaler_count += timer0_max_count) + >= hardclock_max_count) { + mtx_lock_spin(&clock_lock); + i8254_offset = i8254_get_timecount(NULL); + i8254_lastcount = 0; + timer0_max_count = hardclock_max_count; + outb(TIMER_MODE, + TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT); + outb(TIMER_CNTR0, timer0_max_count & 0xff); + outb(TIMER_CNTR0, timer0_max_count >> 8); + mtx_unlock_spin(&clock_lock); + timer0_prescaler_count = 0; + timer_func = hardclock; + timer0_state = RELEASED; + hardclock(&frame); +#ifdef SMP + forward_hardclock(); +#endif + } + break; + } +#endif } +#ifndef BURN_BRIDGES +/* + * The acquire and release functions must be called at ipl >= splclock(). + */ +int +acquire_timer0(int rate, void (*function)(struct clockframe *frame)) +{ + static int old_rate; + + if (rate <= 0 || rate > TIMER0_MAX_FREQ) + return (-1); + switch (timer0_state) { + + case RELEASED: + timer0_state = ACQUIRE_PENDING; + break; + + case RELEASE_PENDING: + if (rate != old_rate) + return (-1); + /* + * The timer has been released recently, but is being + * re-acquired before the release completed. In this + * case, we simply reclaim it as if it had not been + * released at all. + */ + timer0_state = ACQUIRED; + break; + + default: + return (-1); /* busy */ + } + new_function = function; + old_rate = new_rate = rate; + return (0); +} +#endif + int acquire_timer1(int mode) { @@ -222,6 +341,28 @@ acquire_timer2(int mode) return (0); } +#ifndef BURN_BRIDGES +int +release_timer0() +{ + switch (timer0_state) { + + case ACQUIRED: + timer0_state = RELEASE_PENDING; + break; + + case ACQUIRE_PENDING: + /* Nothing happened yet, release quickly. */ + timer0_state = RELEASED; + break; + + default: + return (-1); + } + return (0); +} +#endif + int release_timer1() { @@ -937,6 +1078,10 @@ sysctl_machdep_i8254_freq(SYSCTL_HANDLER_ARGS) freq = timer_freq; error = sysctl_handle_int(oidp, &freq, sizeof(freq), req); if (error == 0 && req->newptr != NULL) { +#ifndef BURN_BRIDGES + if (timer0_state != RELEASED) + return (EBUSY); /* too much trouble to handle */ +#endif set_timer_freq(freq, hz); i8254_timecounter.tc_frequency = freq; } -- cgit v1.1