From 17b0480645f9ad8ad38ec6688f9c63aff682f2f4 Mon Sep 17 00:00:00 2001 From: obrien Date: Fri, 14 May 1999 02:26:20 +0000 Subject: Virgin import of Xircom PCCARD driver v1.19. v1.19 (1999/04/15) updates the CEM56/REM56 support. Current bugs & misfeatures -------------------------- * CE2 cards still not working reliably. Unclear if this is related to packet I/O code or interrupt handling. * Autonegotiation support remains flaky. We're now OK with 10Mbit auto hubs, but certain combination of hardware will fail to connect. Developed by: Scott Mitchell Obtained from: http://www.freebsd-uk.eu.org/~scott/xe_drv/ --- sys/dev/xe/if_xe.c | 141 ++++++++++++++++++++++++----------------------------- 1 file changed, 63 insertions(+), 78 deletions(-) (limited to 'sys/dev/xe') diff --git a/sys/dev/xe/if_xe.c b/sys/dev/xe/if_xe.c index d51d3d2..d36d4aa 100644 --- a/sys/dev/xe/if_xe.c +++ b/sys/dev/xe/if_xe.c @@ -23,7 +23,7 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * - * $Id: if_xe.c,v 1.18 1999/04/08 12:42:35 scott Exp $ + * $Id: if_xe.c,v 1.19 1999/04/15 22:15:53 scott Exp $ */ /* @@ -61,30 +61,41 @@ /* * FreeBSD device driver for Xircom CreditCard PCMCIA Ethernet adapters. The - * following cards and media are, or will eventually be, supported (Ethernet - * part only on the multifunction CEM cards): - * CE2 10BASE-2, 10BASE-T (I think) - * CEM28 ditto - * CEM33 ditto - * CE3 10BASE-T, 100BASE-TX - * CEM56 ditto - * RealPort ditto - * Compaq and Intel cards using the Xircom CE3 hardware are also known to - * work. See the website for full details of supported hardware. + * following cards are currently known to work with the driver: + * Xircom CreditCard 10/100 (CE3) + * Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56) + * Xircom RealPort Ethernet 10/100 + * Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G) + * Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A) + * Compaq Netelligent 10/100 PC Card (CPQ-10/100) + * + * Some other cards *should* work, but support for them is either broken or in + * an unknown state at the moment. I'm always interested in hearing from + * people who own any of these cards: + * Xircom CreditCard 10Base-T (PS-CE2-10) + * Xircom CreditCard Ethernet + ModemII (CEM2) + * Xircom CEM28 and CEM33 Ethernet/Modem cards (may be variants of CEM2?) * * Thanks to all who assisted with the development and testing of the driver, - * especially: Werner Koch, Duke Kamstra, Duncan Barclay, Ade Lovett, Jason - * George, Dru Nelson, Mike Kephart, Bill Rainey and Douglas Rand. Apologies - * if I've left out anyone who deserves a mention here. + * especially: Werner Koch, Duke Kamstra, Duncan Barclay, Jason George, Dru + * Nelson, Mike Kephart, Bill Rainey and Douglas Rand. Apologies if I've left + * out anyone who deserves a mention here. + * + * Special thanks to Ade Lovett for both hosting the mailing list and doing + * the CEM56/REM56 support code; and the FreeBSD UK Users' Group for hosting + * the web pages. + * + * Contact points: * - * Driver web page: http://www.freebsd-uk.eu.org/~scott/xe_drv/ + * Driver web page: http://ukug.uk.freebsd.org/~scott/xe_drv/ * * Mailing list: http://www.lovett.com/lists/freebsd-xircom/ * or send "subscribe freebsd-xircom" to * - * Author email: + * Author email: */ + #define XE_DEBUG 1 #include "xe.h" @@ -168,6 +179,8 @@ struct xe_softc { }; static struct xe_softc *sca[MAXSLOT]; +static int iob[MAXSLOT]; /* XXX - very gross */ + /* * MII command structure @@ -305,9 +318,10 @@ struct isa_driver xedriver = { static int xe_probe (struct isa_device *dev) { #ifdef XE_DEBUG - printf("xe: probe\n"); + printf("xe%d: probe, iobase = %#x\n", dev->id_unit, dev->id_iobase); #endif bzero(sca, MAXSLOT * sizeof(sca[0])); + iob[dev->id_unit] = dev->id_iobase; return 0; } @@ -371,86 +385,53 @@ xe_cem56fix(struct xe_softc *scp) struct pccard_devinfo *devi; struct slot *slt; struct slot_ctrl *ctrl; - int ioport; - -#ifdef XE_DEBUG - u_char buf[32]; - int i; -#endif + int ioport, fail; /* initialise a few variables */ devi = scp->crd; slt = devi->slt; ctrl = slt->ctrl; - /* move the modem (on I/O 0), to I/0 1 - * not entirely sure if this is necessary, but it's in the Linux - * driver, so we do it + /* allocate a new I/O slot for the ethernet */ + /* XXX: ctrl->mapio() always appears to return 0 (success), so + * this may cause problems if another device is listening + * on 0x300 already */ - - /* save the modem data */ slt->io[1].window = 1; - slt->io[1].flags = slt->io[0].flags; - slt->io[1].start = slt->io[0].start; - slt->io[1].size = slt->io[0].size; - - /* unregister I/O port 0 */ - ctrl->mapio( slt, 0 ); - - /* re-register modem as I/O port 1 */ - ctrl->mapio( slt, 1 ); - - /* find an available I/O address to use for the Ethernet part */ - slt->io[0].window = 0; - slt->io[0].flags = IODF_WS|IODF_16BIT|IODF_ZEROWS|IODF_ACTIVE; - slt->io[0].size = 16; - for (ioport = 0x300; ioport < 0x400; ioport += 0x10) { - slt->io[0].start = ioport; - if (ctrl->mapio( slt, 0 ) == 0) - break; + slt->io[1].flags = IODF_WS|IODF_16BIT|IODF_ZEROWS|IODF_ACTIVE; + slt->io[1].size = 0x10; + if (iob[scp->unit] == -1) { + for (ioport = 0x300; ioport < 0x400; ioport += 0x10) { + slt->io[1].start = ioport; + if ((fail = ctrl->mapio( slt, 1 )) == 0) + break; + } + } + else { + ioport = iob[scp->unit]; + slt->io[1].start = ioport; + fail = ctrl->mapio(slt, 1); } /* did we find one? */ - if (ioport == 0x400) { + if (fail) { printf( "xe%d: xe_cem56fix: no free address space\n", scp->unit ); return -1; } + /* munge the id_iobase entry for use by the rest of the driver */ #ifdef XE_DEBUG printf( "xe%d: using 0x%x for RealPort ethernet\n", scp->unit, ioport ); #endif scp->dev->id_iobase = ioport; + scp->dev->id_alive = 0x10; - /* first bit of magic */ + /* magic to set up the ethernet */ xe_memwrite( devi, 0x800, 0x47 ); xe_memwrite( devi, 0x80a, ioport & 0xff ); xe_memwrite( devi, 0x80c, (ioport >> 8) & 0xff ); -#ifdef XE_DEBUG - if (xe_memread( devi, 0x800, buf, 14 ) == 0) { - printf( "ECOR:" ); - for (i = 0; i < 7; i++) - printf( " %02x", buf[i*2] ); - printf( "\n" ); - } - - if (xe_memread( devi, 0x820, buf, 8 ) == 0) { - printf( "DCOR:" ); - for (i = 0; i < 4; i++) - printf( " %02x", buf[i*2] ); - printf( "\n" ); - } - - if (xe_memread( devi, 0x840, buf, 20 ) == 0) { - printf( "SCOR:" ); - for (i = 0; i < 10; i++) - printf( " %02x", buf[i*2] ); - printf( "\n" ); - } -#endif - - /* second bit of magic */ xe_memwrite( devi, 0x820, 0x01 ); xe_memwrite( devi, 0x822, 0x0c ); xe_memwrite( devi, 0x824, 0x00 ); @@ -537,7 +518,7 @@ xe_card_init(struct pccard_devinfo *devi) #endif for (i = 0; i < CISTPL_LEN(buf); ver_str[i] = CISTPL_DATA(buf, i++)); ver_str[i] = '\0'; - ver_str[CISTPL_BUFSIZE>>1 - 1] = CISTPL_LEN(buf); + ver_str[(CISTPL_BUFSIZE>>1) - 1] = CISTPL_LEN(buf); success++; break; @@ -1224,7 +1205,7 @@ xe_card_intr(struct pccard_devinfo *devi) { */ for (i = 0; i < len; i++, rhs++) { ((char *)ehp)[i] = XE_INB(XE_EDP); - if (rhs = 0x8000) { + if (rhs == 0x8000) { rhs = 0; i--; } @@ -1917,7 +1898,7 @@ xe_setaddrs(struct xe_softc *scp) { } for (i = 0; i < 6; i++, byte++) { -#ifdef XE_DEBUG +#if XE_DEBUG > 1 if (i) printf(":%x", addr[i]); else @@ -1935,7 +1916,7 @@ xe_setaddrs(struct xe_softc *scp) { else XE_OUTB(byte, addr[i]); } -#ifdef XE_DEBUG +#if XE_DEBUG > 1 printf("\n"); #endif } @@ -2390,11 +2371,13 @@ xe_reg_dump(struct xe_softc *scp) { */ static int xe_suspend(void *xunit) { - struct xe_softc *scp = sca[(int)xunit]; #ifdef XE_DEBUG + struct xe_softc *scp = sca[(int)xunit]; + printf("xe%d: APM suspend\n", scp->unit); #endif + return 0; } @@ -2403,11 +2386,13 @@ xe_suspend(void *xunit) { */ static int xe_resume(void *xunit) { - struct xe_softc *scp = sca[(int)xunit]; #ifdef XE_DEBUG + struct xe_softc *scp = sca[(int)xunit]; + printf("xe%d: APM resume\n", scp->unit); #endif + return 0; } -- cgit v1.1