From 6110d6b11d5fcc4767f89ca7696eac803c4c729b Mon Sep 17 00:00:00 2001 From: jfv Date: Wed, 11 Jul 2007 23:03:16 +0000 Subject: Add the actual source too :) Approved by: re --- sys/dev/ixgbe/ixgbe_phy.c | 592 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 592 insertions(+) create mode 100644 sys/dev/ixgbe/ixgbe_phy.c (limited to 'sys/dev/ixgbe/ixgbe_phy.c') diff --git a/sys/dev/ixgbe/ixgbe_phy.c b/sys/dev/ixgbe/ixgbe_phy.c new file mode 100644 index 0000000..5043109 --- /dev/null +++ b/sys/dev/ixgbe/ixgbe_phy.c @@ -0,0 +1,592 @@ +/******************************************************************************* + + Copyright (c) 2001-2007, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +*******************************************************************************/ +/* $FreeBSD$ */ + +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +/** + * ixgbe_init_shared_code_phy - Initialize PHY shared code + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_shared_code_phy(struct ixgbe_hw *hw) +{ + /* Assign function pointers */ + ixgbe_assign_func_pointers_phy(hw); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_assign_func_pointers_phy - Assigns PHY-specific function pointers + * @hw: pointer to hardware structure + * + * Note, generic function pointers have already been assigned, so the + * function pointers set here are only for PHY-specific functions. + **/ +s32 ixgbe_assign_func_pointers_phy(struct ixgbe_hw *hw) +{ + hw->func.ixgbe_func_reset_phy = + &ixgbe_reset_phy_generic; + hw->func.ixgbe_func_read_phy_reg = + &ixgbe_read_phy_reg_generic; + hw->func.ixgbe_func_write_phy_reg = + &ixgbe_write_phy_reg_generic; + hw->func.ixgbe_func_identify_phy = + &ixgbe_identify_phy_generic; + + if (ixgbe_get_media_type(hw) == ixgbe_media_type_copper) { + /* Call PHY identify routine to get the phy type */ + ixgbe_identify_phy(hw); + + switch (hw->phy.type) { + case ixgbe_phy_tn: + hw->func.ixgbe_func_setup_phy_link = + &ixgbe_setup_tnx_phy_link; + hw->func.ixgbe_func_check_phy_link = + &ixgbe_check_tnx_phy_link; + hw->func.ixgbe_func_setup_phy_link_speed = + &ixgbe_setup_tnx_phy_link_speed; + break; + default: + break; + } + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_identify_phy_generic - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 phy_addr; + + for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { + if (ixgbe_validate_phy_addr(hw, phy_addr)) { + hw->phy.addr = phy_addr; + ixgbe_get_phy_id(hw); + hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id); + status = IXGBE_SUCCESS; + break; + } + } + return status; +} + +/** + * ixgbe_validate_phy_addr - Determines phy address is valid + * @hw: pointer to hardware structure + * + **/ +bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) +{ + u16 phy_id = 0; + bool valid = FALSE; + + hw->phy.addr = phy_addr; + ixgbe_read_phy_reg_generic(hw, + IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id); + + if (phy_id != 0xFFFF && phy_id != 0x0) + valid = TRUE; + + return valid; +} + +/** + * ixgbe_get_phy_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) +{ + u32 status; + u16 phy_id_high = 0; + u16 phy_id_low = 0; + + status = ixgbe_read_phy_reg_generic(hw, + IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_high); + + if (status == IXGBE_SUCCESS) { + hw->phy.id = (u32)(phy_id_high << 16); + status = ixgbe_read_phy_reg_generic(hw, + IXGBE_MDIO_PHY_ID_LOW, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_low); + hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); + hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); + } + + return status; +} + +/** + * ixgbe_get_phy_type_from_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) +{ + enum ixgbe_phy_type phy_type; + + switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; + + case QT2022_PHY_ID: + phy_type = ixgbe_phy_qt; + break; + + default: + phy_type = ixgbe_phy_unknown; + break; + } + + return phy_type; +} + +/** + * ixgbe_reset_phy_generic - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) +{ + /* + * Perform soft PHY reset to the PHY_XS. + * This will cause a soft reset to the PHY + */ + return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + IXGBE_MDIO_PHY_XS_RESET); +} + +/** + * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + u32 command; + u32 i; + u32 timeout = 10; + u32 data; + s32 status = IXGBE_SUCCESS; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (ixgbe_acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == IXGBE_SUCCESS) { + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < timeout; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) { + break; + } + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + DEBUGFUNC("PHY address command did not complete.\n"); + status = IXGBE_ERR_PHY; + } + + if (status == IXGBE_SUCCESS) { + /* + * Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < timeout; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + DEBUGFUNC("PHY read command didn't complete\n"); + status = IXGBE_ERR_PHY; + } else { + /* + * Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + } + } + + ixgbe_release_swfw_sync(hw, gssr); + } + return status; +} + +/** + * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 command; + u32 i; + u32 timeout = 10; + s32 status = IXGBE_SUCCESS; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (ixgbe_acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == IXGBE_SUCCESS) { + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < timeout; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) { + DEBUGFUNC("PHY address cmd didn't complete\n"); + break; + } + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) + status = IXGBE_ERR_PHY; + + if (status == IXGBE_SUCCESS) { + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < timeout; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) { + DEBUGFUNC("PHY write command did not " + "complete.\n"); + break; + } + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) + status = IXGBE_ERR_PHY; + } + + ixgbe_release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_setup_phy_link - Restart PHY autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, ixgbe_func_setup_phy_link, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_check_phy_link - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads a PHY register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + return ixgbe_call_func(hw, ixgbe_func_check_phy_link, (hw, speed, + link_up), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_setup_phy_link_speed - Set auto advertise + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * + * Sets the auto advertised capabilities + **/ +s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + return ixgbe_call_func(hw, ixgbe_func_setup_phy_link_speed, (hw, speed, + autoneg, autoneg_wait_to_complete), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_setup_tnx_phy_link - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_NOT_IMPLEMENTED; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_speed_selection_register = 0x10; + u16 autoneg_restart_mask = 0x0200; + u16 autoneg_complete_mask = 0x0020; + u16 autoneg_reg = 0; + + /* + * Set advertisement settings in PHY based on autoneg_advertised + * settings. If autoneg_advertised = 0, then advertise default values + * txn devices cannot be "forced" to a autoneg 10G and fail. But can + * for a 1G. + */ + ixgbe_read_phy_reg(hw, + autoneg_speed_selection_register, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */ + else + autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */ + + ixgbe_write_phy_reg(hw, + autoneg_speed_selection_register, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + + + /* Restart PHY autonegotiation and wait for completion */ + ixgbe_read_phy_reg(hw, + IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg |= autoneg_restart_mask; + + ixgbe_write_phy_reg(hw, + IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + usec_delay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = ixgbe_read_phy_reg(hw, + IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= autoneg_complete_mask; + if (autoneg_reg == autoneg_complete_mask) { + status = IXGBE_SUCCESS; + break; + } + } + + if (time_out == max_time_out) + status = IXGBE_ERR_LINK_SETUP; + + return status; +} + +/** + * ixgbe_check_tnx_phy_link - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = IXGBE_SUCCESS; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = FALSE; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + usec_delay(10); + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = TRUE; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } else { + status = ixgbe_read_phy_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + &phy_data); + phy_link = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + } + } + + return status; +} + +/** + * ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + **/ +s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + UNREFERENCED_PARAMETER(autoneg); + UNREFERENCED_PARAMETER(autoneg_wait_to_complete); + + /* + * Clear autoneg_advertised and set new values based on input link + * speed. + */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + } + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + } + + /* Setup link based on the new speed settings */ + ixgbe_setup_tnx_phy_link(hw); + + return IXGBE_SUCCESS; +} -- cgit v1.1