From 75e0beaff360b19816b4c3a15f7d67479f634388 Mon Sep 17 00:00:00 2001
From: ats <ats@FreeBSD.org>
Date: Sat, 3 Sep 1994 18:10:44 +0000
Subject: Reviewed by: Submitted by: Update the if_ep driver for the 3C579 and
 bring over some of the changes from the netbsd driver. This is not complete:
 the detection of the irq in the eisa does not work and sometimes the reset
 for the 3C509 in ISA in an EISA bus system don't work ( Need a hard reset to
 be found again == reset knob).

---
 sys/dev/ep/if_epreg.h | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

(limited to 'sys/dev/ep/if_epreg.h')

diff --git a/sys/dev/ep/if_epreg.h b/sys/dev/ep/if_epreg.h
index f0b4cd9..2b2bcb9 100644
--- a/sys/dev/ep/if_epreg.h
+++ b/sys/dev/ep/if_epreg.h
@@ -21,7 +21,7 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
- *	$Id: if_epreg.h,v 1.1 1993/12/14 04:26:47 hpeyerl Exp $
+ *	$Id: if_epreg.h,v 1.2 1994/01/10 19:13:50 ats Exp $
  */
 /**************************************************************************
  *										  *
@@ -181,9 +181,9 @@
 #define SET_RD_0_MASK		(u_short) (0xf<<11)
 #define SET_RX_FILTER		(u_short) (0x10<<11)
 #      define FIL_INDIVIDUAL	(u_short) (0x1)
-#      define FIL_GROUP		(u_short) (0x2)
+#      define FIL_MULTICAST	(u_short) (0x2)
 #      define FIL_BRDCST	(u_short) (0x4)
-#      define FIL_ALL		(u_short) (0x8)
+#      define FIL_PROMISC	(u_short) (0x8)
 #define SET_RX_EARLY_THRESH	(u_short) (0x11<<11)
 #define SET_TX_AVAIL_THRESH	(u_short) (0x12<<11)
 #define SET_TX_START_THRESH	(u_short) (0x13<<11)
@@ -276,8 +276,8 @@
 #define ACTIVATE_ADAPTER_TO_CONFIG 	0xff
 #define ENABLE_DRQ_IRQ			0x0001
 #define MFG_ID 				0x6d50
-#define PROD_ID 			0x9150
-#define BASE 				sc->ep_io_addr
+#define PROD_ID 			0x9050
+#define BASE 				sc->ep_iobase
 #define GO_WINDOW(x) 			outw(BASE+EP_COMMAND, WINDOW_SELECT|x)
 #define AUI 				0x1
 #define BNC 				0x2
@@ -293,3 +293,14 @@
 #define ENABLE_UTP			0xc0
 #define DISABLE_UTP			0x0
 #define RX_BYTES_MASK			(u_short) (0x07ff)
+
+
+/*
+ * EISA registers (offset from slot base)
+ */
+#define	EISA_VENDOR		0x0c80	/* vendor ID (2 ports) */
+#define	EISA_MODEL		0x0c82	/* model number (2 ports) */
+#define	EISA_CONTROL		0x0c84
+#define	 EISA_RESET		0x04
+#define	 EISA_ERROR		0x02
+#define	 EISA_ENABLE		0x01
-- 
cgit v1.1