From 92a8d9884de2b1441cb846d50856e44cfa2b0024 Mon Sep 17 00:00:00 2001 From: neel Date: Mon, 21 Jan 2013 01:33:10 +0000 Subject: Postpone vmm module initialization until after SMP is initialized - particularly that 'smp_started != 0'. This is required because the VT-x initialization calls smp_rendezvous() to set the CR4_VMXE bit on all the cpus. With this change we can preload vmm.ko from the loader. Reported by: alfred@, sbruno@ Obtained from: NetApp --- sys/amd64/vmm/vmm.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'sys/amd64') diff --git a/sys/amd64/vmm/vmm.c b/sys/amd64/vmm/vmm.c index a4dea79..d0e6427 100644 --- a/sys/amd64/vmm/vmm.c +++ b/sys/amd64/vmm/vmm.c @@ -249,11 +249,15 @@ static moduledata_t vmm_kmod = { }; /* - * Execute the module load handler after the pci passthru driver has had - * a chance to claim devices. We need this information at the time we do - * iommu initialization. + * vmm initialization has the following dependencies: + * + * - iommu initialization must happen after the pci passthru driver has had + * a chance to attach to any passthru devices (after SI_SUB_CONFIGURE). + * + * - VT-x initialization requires smp_rendezvous() and therefore must happen + * after SMP is fully functional (after SI_SUB_SMP). */ -DECLARE_MODULE(vmm, vmm_kmod, SI_SUB_CONFIGURE + 1, SI_ORDER_ANY); +DECLARE_MODULE(vmm, vmm_kmod, SI_SUB_SMP + 1, SI_ORDER_ANY); MODULE_VERSION(vmm, 1); SYSCTL_NODE(_hw, OID_AUTO, vmm, CTLFLAG_RW, NULL, NULL); -- cgit v1.1