From 4bbd6d5f38ed4e50ad9296734e79fd4688495d0d Mon Sep 17 00:00:00 2001 From: brueffer Date: Tue, 2 Mar 2004 18:20:42 +0000 Subject: Language cleanup --- share/man/man4/man4.i386/cx.4 | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'share/man') diff --git a/share/man/man4/man4.i386/cx.4 b/share/man/man4/man4.i386/cx.4 index 1c01dc4..5cf57da 100644 --- a/share/man/man4/man4.i386/cx.4 +++ b/share/man/man4/man4.i386/cx.4 @@ -40,18 +40,19 @@ driver needs either .Xr sppp 4 or .Xr netgraph 4 . -Which one to use is determined by NETGRAPH_CRONYX option. +Which one to use is determined by the NETGRAPH_CRONYX option. If this option is present in your kernel configuration file, the .Nm driver will be compiled with .Xr netgraph 4 -support, else driver will be compiled with +support. +Otherwise, it will be compiled with .Xr sppp 4 support. .Pp The base i/o port address specified in .Pa /boot/device.hints -must match the port address set by jumpers on the board. +must match the port address set by the jumpers on the board. The DMA i/o channel and interrupt request numbers are configured by software at adapter initialization. Legal values are: @@ -68,12 +69,12 @@ Legal values are: The .Nm driver supports autodetection. -As for all non-PNP hardware using of +As for all non-PNP hardware, using autodetection could lead to some potential problems with other devices during -detection of hardware. -It is alway better to specify hardware resources manualy. +the hardware detection process. +It is always better to specify hardware resources manually. .Pp -Refere to +Refer to .Xr sconfig 8 for information about the .Nm @@ -89,7 +90,7 @@ The .Nm driver was updated in .Fx 5.2 . -In most of previous versions of +In most of the previous versions of .Fx the .Nm -- cgit v1.1