From e7e38a82aec5f02fc694cbd0d0d6f34666f38085 Mon Sep 17 00:00:00 2001 From: jkim Date: Thu, 26 Jan 2017 23:29:30 +0000 Subject: Disable assembly sources when compiler/assembler cannot compile certain instructions. Note this is a direct commit because head and stable/11 has OpenSSL 1.0.2 branch. However, it is based on r304320. Requested by: julian --- secure/lib/libcrypto/Makefile | 67 +++---- secure/lib/libcrypto/Makefile.asm | 4 +- secure/lib/libcrypto/Makefile.inc | 14 +- secure/lib/libcrypto/opensslconf-arm.h | 242 ----------------------- secure/lib/libcrypto/opensslconf-arm.h.in | 244 +++++++++++++++++++++++ secure/lib/libcrypto/opensslconf-ia64.h | 230 --------------------- secure/lib/libcrypto/opensslconf-ia64.h.in | 230 +++++++++++++++++++++ secure/lib/libcrypto/opensslconf-mips.h | 256 ------------------------ secure/lib/libcrypto/opensslconf-mips.h.in | 256 ++++++++++++++++++++++++ secure/lib/libcrypto/opensslconf-powerpc.h | 251 ----------------------- secure/lib/libcrypto/opensslconf-powerpc.h.in | 253 ++++++++++++++++++++++++ secure/lib/libcrypto/opensslconf-sparc64.h | 242 ----------------------- secure/lib/libcrypto/opensslconf-sparc64.h.in | 244 +++++++++++++++++++++++ secure/lib/libcrypto/opensslconf-x86.h | 271 ------------------------- secure/lib/libcrypto/opensslconf-x86.h.in | 274 ++++++++++++++++++++++++++ 15 files changed, 1547 insertions(+), 1531 deletions(-) delete mode 100644 secure/lib/libcrypto/opensslconf-arm.h create mode 100644 secure/lib/libcrypto/opensslconf-arm.h.in delete mode 100644 secure/lib/libcrypto/opensslconf-ia64.h create mode 100644 secure/lib/libcrypto/opensslconf-ia64.h.in delete mode 100644 secure/lib/libcrypto/opensslconf-mips.h create mode 100644 secure/lib/libcrypto/opensslconf-mips.h.in delete mode 100644 secure/lib/libcrypto/opensslconf-powerpc.h create mode 100644 secure/lib/libcrypto/opensslconf-powerpc.h.in delete mode 100644 secure/lib/libcrypto/opensslconf-sparc64.h create mode 100644 secure/lib/libcrypto/opensslconf-sparc64.h.in delete mode 100644 secure/lib/libcrypto/opensslconf-x86.h create mode 100644 secure/lib/libcrypto/opensslconf-x86.h.in (limited to 'secure') diff --git a/secure/lib/libcrypto/Makefile b/secure/lib/libcrypto/Makefile index ca1520b..0c28f08 100644 --- a/secure/lib/libcrypto/Makefile +++ b/secure/lib/libcrypto/Makefile @@ -22,9 +22,9 @@ MAN+= config.5 des_modes.7 # base sources SRCS= cpt_err.c cryptlib.c cversion.c ex_data.c mem.c mem_dbg.c o_dir.c \ o_fips.c o_init.c o_str.c o_time.c uid.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= x86_64cpuid.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= x86cpuid.S .else SRCS+= mem_clr.c @@ -33,10 +33,10 @@ INCS+= crypto.h ebcdic.h opensslv.h ossl_typ.h symhacks.h ../e_os2.h # aes SRCS+= aes_cfb.c aes_ctr.c aes_ecb.c aes_ige.c aes_misc.c aes_ofb.c aes_wrap.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= aes-x86_64.S aesni-sha1-x86_64.S aesni-x86_64.S bsaes-x86_64.S \ vpaes-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= aes-586.S aesni-x86.S vpaes-x86.S .else SRCS+= aes_cbc.c aes_core.c @@ -60,7 +60,7 @@ INCS+= asn1.h asn1_mac.h asn1t.h # bf SRCS+= bf_cfb64.c bf_ecb.c bf_ofb64.c bf_skey.c -.if ${MACHINE_CPUARCH} == "i386" +.if defined(ASM_i386) .if ${MACHINE_CPU:Mi686} SRCS+= bf-686.S .else @@ -82,10 +82,10 @@ SRCS+= bn_add.c bn_blind.c bn_const.c bn_ctx.c bn_depr.c bn_div.c bn_err.c \ bn_exp.c bn_exp2.c bn_gcd.c bn_gf2m.c bn_kron.c bn_lib.c bn_mod.c \ bn_mont.c bn_mpi.c bn_mul.c bn_nist.c bn_prime.c bn_print.c bn_rand.c \ bn_recp.c bn_shift.c bn_sqr.c bn_sqrt.c bn_word.c bn_x931p.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= modexp512-x86_64.S x86_64-gcc.c x86_64-gf2m.S x86_64-mont.S \ x86_64-mont5.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= bn-586.S co-586.S x86-gf2m.S x86-mont.S .else SRCS+= bn_asm.c @@ -98,9 +98,9 @@ INCS+= buffer.h # camellia SRCS+= cmll_cfb.c cmll_ctr.c cmll_ecb.c cmll_ofb.c cmll_utl.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= cmll_misc.c cmll-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= cmll-x86.S .else SRCS+= camellia.c cmll_cbc.c cmll_misc.c @@ -134,7 +134,7 @@ SRCS+= cbc_cksm.c cbc_enc.c cfb64ede.c cfb64enc.c cfb_enc.c des_old.c \ des_old2.c ecb3_enc.c ecb_enc.c ede_cbcm_enc.c enc_read.c enc_writ.c \ fcrypt.c ofb64ede.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c \ rand_key.c read2pwd.c rpc_enc.c set_key.c str2key.c xcbc_enc.c -.if ${MACHINE_CPUARCH} == "i386" +.if defined(ASM_i386) SRCS+= crypt586.S des-586.S .else SRCS+= des_enc.c fcrypt_b.c @@ -215,9 +215,9 @@ INCS+= md4.h # md5 SRCS+= md5_dgst.c md5_one.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= md5-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= md5-586.S .endif INCS+= md5.h @@ -228,9 +228,9 @@ INCS+= mdc2.h # modes SRCS+= cbc128.c ccm128.c cfb128.c ctr128.c cts128.c gcm128.c ofb128.c xts128.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= ghash-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= ghash-x86.S .endif INCS+= modes.h @@ -274,9 +274,9 @@ INCS+= rc2.h # rc4 SRCS+= rc4_utl.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= rc4-md5-x86_64.S rc4-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= rc4-586.S .else SRCS+= rc4_enc.c rc4_skey.c @@ -285,7 +285,7 @@ INCS+= rc4.h # rc5 SRCS+= rc5_ecb.c rc5_skey.c rc5cfb64.c rc5ofb64.c -.if ${MACHINE_CPUARCH} == "i386" +.if defined(ASM_i386) SRCS+= rc5-586.S .else SRCS+= rc5_enc.c @@ -294,7 +294,7 @@ INCS+= rc5.h # ripemd SRCS+= rmd_dgst.c rmd_one.c -.if ${MACHINE_CPUARCH} == "i386" +.if defined(ASM_i386) SRCS+= rmd-586.S .endif INCS+= ripemd.h @@ -312,9 +312,9 @@ INCS+= seed.h # sha SRCS+= sha1_one.c sha1dgst.c sha256.c sha512.c sha_dgst.c sha_one.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= sha1-x86_64.S sha256-x86_64.S sha512-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= sha1-586.S sha256-586.S sha512-586.S .endif INCS+= sha.h @@ -343,9 +343,9 @@ INCS+= ui.h ui_compat.h # whrlpool SRCS+= wp_dgst.c -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) SRCS+= wp-x86_64.S -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) SRCS+= wp-mmx.S wp_block.c .else SRCS+= wp_block.c @@ -382,7 +382,7 @@ CFLAGS+= -I${LCRYPTO_SRC}/crypto/modes ACFLAGS+= -Wa,--noexecstack .endif -CLEANFILES= buildinf.h opensslconf.h +CLEANFILES= buildinf.h opensslconf.h opensslconf.h.tmp buildinf.h: ${.CURDIR}/Makefile ( echo "#ifndef MK1MF_BUILD"; \ @@ -391,23 +391,21 @@ buildinf.h: ${.CURDIR}/Makefile echo " #define PLATFORM \"platform: FreeBSD-${MACHINE_ARCH}\""; \ echo "#endif" ) > ${.TARGET} -.if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" -opensslconf.h: opensslconf-x86.h +opensslconf.h: opensslconf-${MACHINE_CPUARCH:C/^(amd64|i386)$/x86/}.h.in +.if defined(ASM_${MACHINE_CPUARCH}) + sed 's/%%ASM%%//; /%%NO_ASM%%/d' ${.ALLSRC} > ${.TARGET}.tmp .else -opensslconf.h: opensslconf-${MACHINE_CPUARCH}.h + sed '/%%ASM%%/d; s/%%NO_ASM%%//' ${.ALLSRC} > ${.TARGET}.tmp .endif - cp -f ${.ALLSRC} ${.TARGET} + cp -f ${.TARGET}.tmp ${.TARGET} .include -.if ${MACHINE_CPUARCH} == "amd64" -.PATH: ${.CURDIR}/amd64 -.elif ${MACHINE_CPUARCH} == "i386" -.PATH: ${.CURDIR}/i386 +.if defined(ASM_${MACHINE_CPUARCH}) +.PATH: ${.CURDIR}/${MACHINE_CPUARCH} +.if defined(ASM_amd64) +.PATH: ${LCRYPTO_SRC}/crypto/bn/asm .endif - -.if ${MACHINE_CPUARCH} == "amd64" -_bn_asmpath= ${LCRYPTO_SRC}/crypto/bn/asm .endif .PATH: ${LCRYPTO_SRC}/crypto \ @@ -416,7 +414,6 @@ _bn_asmpath= ${LCRYPTO_SRC}/crypto/bn/asm ${LCRYPTO_SRC}/crypto/bf \ ${LCRYPTO_SRC}/crypto/bio \ ${LCRYPTO_SRC}/crypto/bn \ - ${_bn_asmpath} \ ${LCRYPTO_SRC}/crypto/buffer \ ${LCRYPTO_SRC}/crypto/camellia \ ${LCRYPTO_SRC}/crypto/cast \ diff --git a/secure/lib/libcrypto/Makefile.asm b/secure/lib/libcrypto/Makefile.asm index 16ea250..42a7194 100644 --- a/secure/lib/libcrypto/Makefile.asm +++ b/secure/lib/libcrypto/Makefile.asm @@ -6,7 +6,7 @@ .include "Makefile.inc" -.if ${MACHINE_CPUARCH} == "amd64" +.if defined(ASM_amd64) .PATH: ${LCRYPTO_SRC}/crypto \ ${LCRYPTO_SRC}/crypto/aes/asm \ @@ -73,7 +73,7 @@ ${s}.S: ${s}.s cat ${s}.s ) > ${.TARGET} .endfor -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) .PATH: ${LCRYPTO_SRC}/crypto \ ${LCRYPTO_SRC}/crypto/aes/asm \ diff --git a/secure/lib/libcrypto/Makefile.inc b/secure/lib/libcrypto/Makefile.inc index c770cf2..c2da05b 100644 --- a/secure/lib/libcrypto/Makefile.inc +++ b/secure/lib/libcrypto/Makefile.inc @@ -21,7 +21,17 @@ CFLAGS+=-DL_ENDIAN CFLAGS+=-DB_ENDIAN .endif -.if ${MACHINE_CPUARCH} == "amd64" +.if ${MACHINE_CPUARCH} == "amd64" || ${MACHINE_CPUARCH} == "i386" +_ASM_AVX!= { \ + echo vzeroall | \ + ${CC} -x assembler -o /dev/null -c - 2> /dev/null; \ + } && echo yes || echo no +.if ${_ASM_AVX} == yes +ASM_${MACHINE_CPUARCH}= +.endif +.endif + +.if defined(ASM_amd64) CFLAGS+=-DOPENSSL_IA32_SSE2 CFLAGS+=-DAES_ASM -DBSAES_ASM -DVPAES_ASM CFLAGS+=-DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m @@ -29,7 +39,7 @@ CFLAGS+=-DMD5_ASM CFLAGS+=-DGHASH_ASM CFLAGS+=-DSHA1_ASM -DSHA256_ASM -DSHA512_ASM CFLAGS+=-DWHIRLPOOL_ASM -.elif ${MACHINE_CPUARCH} == "i386" +.elif defined(ASM_i386) CFLAGS+=-DOPENSSL_IA32_SSE2 CFLAGS+=-DAES_ASM -DVPAES_ASM CFLAGS+=-DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m diff --git a/secure/lib/libcrypto/opensslconf-arm.h b/secure/lib/libcrypto/opensslconf-arm.h deleted file mode 100644 index 11bebb6..0000000 --- a/secure/lib/libcrypto/opensslconf-arm.h +++ /dev/null @@ -1,242 +0,0 @@ -/* $FreeBSD$ */ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -#ifdef __cplusplus -extern "C" { -#endif -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 -# define OPENSSL_NO_EC_NISTP_64_GCC_128 -#endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_SCTP -# define OPENSSL_NO_SCTP -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_UNIT_TEST -# define OPENSSL_NO_UNIT_TEST -#endif -#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS -# define OPENSSL_NO_WEAK_SSL_CIPHERS -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_ASM -# define OPENSSL_NO_ASM -#endif -#ifndef OPENSSL_NO_STATIC_ENGINE -# define OPENSSL_NO_STATIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) -# define NO_EC_NISTP_64_GCC_128 -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) -# define NO_SCTP -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) -# define NO_UNIT_TEST -# endif -# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) -# define NO_WEAK_SSL_CIPHERS -# endif -#endif - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/lib/engines" -#define OPENSSLDIR "/etc/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned int -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#undef RC4_CHUNK -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#define DES_LONG unsigned long -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#define BN_LLONG - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#undef SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#define THIRTY_TWO_BIT -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#define RC4_INDEX -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#undef BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#define DES_PTR -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#define DES_RISC1 -#endif - -#ifndef DES_RISC2 -#undef DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#define DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ -#ifdef __cplusplus -} -#endif diff --git a/secure/lib/libcrypto/opensslconf-arm.h.in b/secure/lib/libcrypto/opensslconf-arm.h.in new file mode 100644 index 0000000..c36c00a --- /dev/null +++ b/secure/lib/libcrypto/opensslconf-arm.h.in @@ -0,0 +1,244 @@ +/* $FreeBSD$ */ +/* opensslconf.h */ +/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ + +#ifdef __cplusplus +extern "C" { +#endif +/* OpenSSL was configured with the following options: */ +#ifndef OPENSSL_DOING_MAKEDEPEND + + +#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 +# define OPENSSL_NO_EC_NISTP_64_GCC_128 +#endif +#ifndef OPENSSL_NO_GMP +# define OPENSSL_NO_GMP +#endif +#ifndef OPENSSL_NO_JPAKE +# define OPENSSL_NO_JPAKE +#endif +#ifndef OPENSSL_NO_KRB5 +# define OPENSSL_NO_KRB5 +#endif +#ifndef OPENSSL_NO_MD2 +# define OPENSSL_NO_MD2 +#endif +#ifndef OPENSSL_NO_SCTP +# define OPENSSL_NO_SCTP +#endif +#ifndef OPENSSL_NO_STORE +# define OPENSSL_NO_STORE +#endif +#ifndef OPENSSL_NO_UNIT_TEST +# define OPENSSL_NO_UNIT_TEST +#endif +#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS +# define OPENSSL_NO_WEAK_SSL_CIPHERS +#endif + +#endif /* OPENSSL_DOING_MAKEDEPEND */ + +#ifndef OPENSSL_THREADS +# define OPENSSL_THREADS +#endif +%%NO_ASM%%#ifndef OPENSSL_NO_ASM +%%NO_ASM%%# define OPENSSL_NO_ASM +%%NO_ASM%%#endif +#ifndef OPENSSL_NO_STATIC_ENGINE +# define OPENSSL_NO_STATIC_ENGINE +#endif + +/* The OPENSSL_NO_* macros are also defined as NO_* if the application + asks for it. This is a transient feature that is provided for those + who haven't had the time to do the appropriate changes in their + applications. */ +#ifdef OPENSSL_ALGORITHM_DEFINES +# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) +# define NO_EC_NISTP_64_GCC_128 +# endif +# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) +# define NO_GMP +# endif +# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) +# define NO_JPAKE +# endif +# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) +# define NO_KRB5 +# endif +# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) +# define NO_MD2 +# endif +# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) +# define NO_SCTP +# endif +# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) +# define NO_STORE +# endif +# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) +# define NO_UNIT_TEST +# endif +# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) +# define NO_WEAK_SSL_CIPHERS +# endif +#endif + +%%ASM%%#define OPENSSL_CPUID_OBJ +%%ASM%% +/* crypto/opensslconf.h.in */ + +/* Generate 80386 code? */ +#undef I386_ONLY + +#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ +#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) +#define ENGINESDIR "/usr/lib/engines" +#define OPENSSLDIR "/etc/ssl" +#endif +#endif + +#undef OPENSSL_UNISTD +#define OPENSSL_UNISTD + +#undef OPENSSL_EXPORT_VAR_AS_FUNCTION + +#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) +#define IDEA_INT unsigned int +#endif + +#if defined(HEADER_MD2_H) && !defined(MD2_INT) +#define MD2_INT unsigned int +#endif + +#if defined(HEADER_RC2_H) && !defined(RC2_INT) +/* I need to put in a mod for the alpha - eay */ +#define RC2_INT unsigned int +#endif + +#if defined(HEADER_RC4_H) +#if !defined(RC4_INT) +/* using int types make the structure larger but make the code faster + * on most boxes I have tested - up to %20 faster. */ +/* + * I don't know what does "most" mean, but declaring "int" is a must on: + * - Intel P6 because partial register stalls are very expensive; + * - elder Alpha because it lacks byte load/store instructions; + */ +#define RC4_INT unsigned int +#endif +#if !defined(RC4_CHUNK) +/* + * This enables code handling data aligned at natural CPU word + * boundary. See crypto/rc4/rc4_enc.c for further details. + */ +#undef RC4_CHUNK +#endif +#endif + +#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) +/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a + * %20 speed up (longs are 8 bytes, int's are 4). */ +#ifndef DES_LONG +#define DES_LONG unsigned long +#endif +#endif + +#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) +#define CONFIG_HEADER_BN_H +#define BN_LLONG + +/* Should we define BN_DIV2W here? */ + +/* Only one for the following should be defined */ +#undef SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#define THIRTY_TWO_BIT +#endif + +#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) +#define CONFIG_HEADER_RC4_LOCL_H +/* if this is defined data[i] is used instead of *data, this is a %20 + * speedup on x86 */ +#define RC4_INDEX +#endif + +#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) +#define CONFIG_HEADER_BF_LOCL_H +#undef BF_PTR +#endif /* HEADER_BF_LOCL_H */ + +#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) +#define CONFIG_HEADER_DES_LOCL_H +#ifndef DES_DEFAULT_OPTIONS +/* the following is tweaked from a config script, that is why it is a + * protected undef/define */ +#ifndef DES_PTR +#define DES_PTR +#endif + +/* This helps C compiler generate the correct code for multiple functional + * units. It reduces register dependancies at the expense of 2 more + * registers */ +#ifndef DES_RISC1 +#define DES_RISC1 +#endif + +#ifndef DES_RISC2 +#undef DES_RISC2 +#endif + +#if defined(DES_RISC1) && defined(DES_RISC2) +YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! +#endif + +/* Unroll the inner loop, this sometimes helps, sometimes hinders. + * Very mucy CPU dependant */ +#ifndef DES_UNROLL +#define DES_UNROLL +#endif + +/* These default values were supplied by + * Peter Gutman + * They are only used if nothing else has been defined */ +#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) +/* Special defines which change the way the code is built depending on the + CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find + even newer MIPS CPU's, but at the moment one size fits all for + optimization options. Older Sparc's work better with only UNROLL, but + there's no way to tell at compile time what it is you're running on */ + +#if defined( sun ) /* Newer Sparc's */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#elif defined( __ultrix ) /* Older MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined( __osf1__ ) /* Alpha */ +# define DES_PTR +# define DES_RISC2 +#elif defined ( _AIX ) /* RS6000 */ + /* Unknown */ +#elif defined( __hpux ) /* HP-PA */ + /* Unknown */ +#elif defined( __aux ) /* 68K */ + /* Unknown */ +#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ +# define DES_UNROLL +#elif defined( __sgi ) /* Newer MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#endif /* Systems-specific speed defines */ +#endif + +#endif /* DES_DEFAULT_OPTIONS */ +#endif /* HEADER_DES_LOCL_H */ +#ifdef __cplusplus +} +#endif diff --git a/secure/lib/libcrypto/opensslconf-ia64.h b/secure/lib/libcrypto/opensslconf-ia64.h deleted file mode 100644 index f4bd669..0000000 --- a/secure/lib/libcrypto/opensslconf-ia64.h +++ /dev/null @@ -1,230 +0,0 @@ -/* $FreeBSD$ */ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 -# define OPENSSL_NO_EC_NISTP_64_GCC_128 -#endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_SCTP -# define OPENSSL_NO_SCTP -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS -# define OPENSSL_NO_WEAK_SSL_CIPHERS -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_ASM -# define OPENSSL_NO_ASM -#endif -#ifndef OPENSSL_NO_STATIC_ENGINE -# define OPENSSL_NO_STATIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) -# define NO_EC_NISTP_64_GCC_128 -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) -# define NO_SCTP -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) -# define NO_WEAK_SSL_CIPHERS -# endif -#endif - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/lib/engines" -#define OPENSSLDIR "/etc/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned int -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#undef RC4_CHUNK -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#define DES_LONG unsigned int -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#undef BN_LLONG - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#define SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#undef THIRTY_TWO_BIT -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#undef RC4_INDEX -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#undef BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#define DES_PTR -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#undef DES_RISC1 -#endif - -#ifndef DES_RISC2 -#define DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#undef DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ diff --git a/secure/lib/libcrypto/opensslconf-ia64.h.in b/secure/lib/libcrypto/opensslconf-ia64.h.in new file mode 100644 index 0000000..8e953b7 --- /dev/null +++ b/secure/lib/libcrypto/opensslconf-ia64.h.in @@ -0,0 +1,230 @@ +/* $FreeBSD$ */ +/* opensslconf.h */ +/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ + +/* OpenSSL was configured with the following options: */ +#ifndef OPENSSL_DOING_MAKEDEPEND + + +#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 +# define OPENSSL_NO_EC_NISTP_64_GCC_128 +#endif +#ifndef OPENSSL_NO_GMP +# define OPENSSL_NO_GMP +#endif +#ifndef OPENSSL_NO_JPAKE +# define OPENSSL_NO_JPAKE +#endif +#ifndef OPENSSL_NO_KRB5 +# define OPENSSL_NO_KRB5 +#endif +#ifndef OPENSSL_NO_MD2 +# define OPENSSL_NO_MD2 +#endif +#ifndef OPENSSL_NO_SCTP +# define OPENSSL_NO_SCTP +#endif +#ifndef OPENSSL_NO_STORE +# define OPENSSL_NO_STORE +#endif +#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS +# define OPENSSL_NO_WEAK_SSL_CIPHERS +#endif + +#endif /* OPENSSL_DOING_MAKEDEPEND */ + +#ifndef OPENSSL_THREADS +# define OPENSSL_THREADS +#endif +%%NO_ASM%%#ifndef OPENSSL_NO_ASM +%%NO_ASM%%# define OPENSSL_NO_ASM +%%NO_ASM%%#endif +#ifndef OPENSSL_NO_STATIC_ENGINE +# define OPENSSL_NO_STATIC_ENGINE +#endif + +/* The OPENSSL_NO_* macros are also defined as NO_* if the application + asks for it. This is a transient feature that is provided for those + who haven't had the time to do the appropriate changes in their + applications. */ +#ifdef OPENSSL_ALGORITHM_DEFINES +# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) +# define NO_EC_NISTP_64_GCC_128 +# endif +# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) +# define NO_GMP +# endif +# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) +# define NO_JPAKE +# endif +# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) +# define NO_KRB5 +# endif +# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) +# define NO_MD2 +# endif +# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) +# define NO_SCTP +# endif +# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) +# define NO_STORE +# endif +# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) +# define NO_WEAK_SSL_CIPHERS +# endif +#endif + +/* crypto/opensslconf.h.in */ + +/* Generate 80386 code? */ +#undef I386_ONLY + +#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ +#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) +#define ENGINESDIR "/usr/lib/engines" +#define OPENSSLDIR "/etc/ssl" +#endif +#endif + +#undef OPENSSL_UNISTD +#define OPENSSL_UNISTD + +#undef OPENSSL_EXPORT_VAR_AS_FUNCTION + +#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) +#define IDEA_INT unsigned int +#endif + +#if defined(HEADER_MD2_H) && !defined(MD2_INT) +#define MD2_INT unsigned int +#endif + +#if defined(HEADER_RC2_H) && !defined(RC2_INT) +/* I need to put in a mod for the alpha - eay */ +#define RC2_INT unsigned int +#endif + +#if defined(HEADER_RC4_H) +#if !defined(RC4_INT) +/* using int types make the structure larger but make the code faster + * on most boxes I have tested - up to %20 faster. */ +/* + * I don't know what does "most" mean, but declaring "int" is a must on: + * - Intel P6 because partial register stalls are very expensive; + * - elder Alpha because it lacks byte load/store instructions; + */ +#define RC4_INT unsigned int +#endif +#if !defined(RC4_CHUNK) +/* + * This enables code handling data aligned at natural CPU word + * boundary. See crypto/rc4/rc4_enc.c for further details. + */ +#undef RC4_CHUNK +#endif +#endif + +#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) +/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a + * %20 speed up (longs are 8 bytes, int's are 4). */ +#ifndef DES_LONG +#define DES_LONG unsigned int +#endif +#endif + +#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) +#define CONFIG_HEADER_BN_H +#undef BN_LLONG + +/* Should we define BN_DIV2W here? */ + +/* Only one for the following should be defined */ +#define SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#undef THIRTY_TWO_BIT +#endif + +#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) +#define CONFIG_HEADER_RC4_LOCL_H +/* if this is defined data[i] is used instead of *data, this is a %20 + * speedup on x86 */ +#undef RC4_INDEX +#endif + +#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) +#define CONFIG_HEADER_BF_LOCL_H +#undef BF_PTR +#endif /* HEADER_BF_LOCL_H */ + +#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) +#define CONFIG_HEADER_DES_LOCL_H +#ifndef DES_DEFAULT_OPTIONS +/* the following is tweaked from a config script, that is why it is a + * protected undef/define */ +#ifndef DES_PTR +#define DES_PTR +#endif + +/* This helps C compiler generate the correct code for multiple functional + * units. It reduces register dependancies at the expense of 2 more + * registers */ +#ifndef DES_RISC1 +#undef DES_RISC1 +#endif + +#ifndef DES_RISC2 +#define DES_RISC2 +#endif + +#if defined(DES_RISC1) && defined(DES_RISC2) +YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! +#endif + +/* Unroll the inner loop, this sometimes helps, sometimes hinders. + * Very mucy CPU dependant */ +#ifndef DES_UNROLL +#undef DES_UNROLL +#endif + +/* These default values were supplied by + * Peter Gutman + * They are only used if nothing else has been defined */ +#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) +/* Special defines which change the way the code is built depending on the + CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find + even newer MIPS CPU's, but at the moment one size fits all for + optimization options. Older Sparc's work better with only UNROLL, but + there's no way to tell at compile time what it is you're running on */ + +#if defined( sun ) /* Newer Sparc's */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#elif defined( __ultrix ) /* Older MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined( __osf1__ ) /* Alpha */ +# define DES_PTR +# define DES_RISC2 +#elif defined ( _AIX ) /* RS6000 */ + /* Unknown */ +#elif defined( __hpux ) /* HP-PA */ + /* Unknown */ +#elif defined( __aux ) /* 68K */ + /* Unknown */ +#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ +# define DES_UNROLL +#elif defined( __sgi ) /* Newer MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#endif /* Systems-specific speed defines */ +#endif + +#endif /* DES_DEFAULT_OPTIONS */ +#endif /* HEADER_DES_LOCL_H */ diff --git a/secure/lib/libcrypto/opensslconf-mips.h b/secure/lib/libcrypto/opensslconf-mips.h deleted file mode 100644 index fe4af3b..0000000 --- a/secure/lib/libcrypto/opensslconf-mips.h +++ /dev/null @@ -1,256 +0,0 @@ -/* $FreeBSD$ */ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -#ifdef __cplusplus -extern "C" { -#endif -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 -# define OPENSSL_NO_EC_NISTP_64_GCC_128 -#endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_SCTP -# define OPENSSL_NO_SCTP -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_UNIT_TEST -# define OPENSSL_NO_UNIT_TEST -#endif -#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS -# define OPENSSL_NO_WEAK_SSL_CIPHERS -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_ASM -# define OPENSSL_NO_ASM -#endif -#ifndef OPENSSL_NO_STATIC_ENGINE -# define OPENSSL_NO_STATIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) -# define NO_EC_NISTP_64_GCC_128 -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) -# define NO_SCTP -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) -# define NO_UNIT_TEST -# endif -# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) -# define NO_WEAK_SSL_CIPHERS -# endif -#endif - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/lib/engines" -#define OPENSSLDIR "/etc/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned int -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#undef RC4_CHUNK -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#ifdef __mips_n64 -#define DES_LONG unsigned int -#else -#define DES_LONG unsigned long -#endif -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#ifdef __mips_n64 -#undef BN_LLONG -#else -#define BN_LLONG -#endif - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#ifdef __mips_n64 -#define SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#undef THIRTY_TWO_BIT -#else -#undef SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#define THIRTY_TWO_BIT -#endif -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#define RC4_INDEX -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#undef BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#define DES_PTR -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#define DES_RISC1 -#endif - -#ifndef DES_RISC2 -#undef DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#define DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ -#ifdef __cplusplus -} -#endif diff --git a/secure/lib/libcrypto/opensslconf-mips.h.in b/secure/lib/libcrypto/opensslconf-mips.h.in new file mode 100644 index 0000000..ee8fcd7 --- /dev/null +++ b/secure/lib/libcrypto/opensslconf-mips.h.in @@ -0,0 +1,256 @@ +/* $FreeBSD$ */ +/* opensslconf.h */ +/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ + +#ifdef __cplusplus +extern "C" { +#endif +/* OpenSSL was configured with the following options: */ +#ifndef OPENSSL_DOING_MAKEDEPEND + + +#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 +# define OPENSSL_NO_EC_NISTP_64_GCC_128 +#endif +#ifndef OPENSSL_NO_GMP +# define OPENSSL_NO_GMP +#endif +#ifndef OPENSSL_NO_JPAKE +# define OPENSSL_NO_JPAKE +#endif +#ifndef OPENSSL_NO_KRB5 +# define OPENSSL_NO_KRB5 +#endif +#ifndef OPENSSL_NO_MD2 +# define OPENSSL_NO_MD2 +#endif +#ifndef OPENSSL_NO_SCTP +# define OPENSSL_NO_SCTP +#endif +#ifndef OPENSSL_NO_STORE +# define OPENSSL_NO_STORE +#endif +#ifndef OPENSSL_NO_UNIT_TEST +# define OPENSSL_NO_UNIT_TEST +#endif +#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS +# define OPENSSL_NO_WEAK_SSL_CIPHERS +#endif + +#endif /* OPENSSL_DOING_MAKEDEPEND */ + +#ifndef OPENSSL_THREADS +# define OPENSSL_THREADS +#endif +%%NO_ASM%%#ifndef OPENSSL_NO_ASM +%%NO_ASM%%# define OPENSSL_NO_ASM +%%NO_ASM%%#endif +#ifndef OPENSSL_NO_STATIC_ENGINE +# define OPENSSL_NO_STATIC_ENGINE +#endif + +/* The OPENSSL_NO_* macros are also defined as NO_* if the application + asks for it. This is a transient feature that is provided for those + who haven't had the time to do the appropriate changes in their + applications. */ +#ifdef OPENSSL_ALGORITHM_DEFINES +# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) +# define NO_EC_NISTP_64_GCC_128 +# endif +# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) +# define NO_GMP +# endif +# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) +# define NO_JPAKE +# endif +# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) +# define NO_KRB5 +# endif +# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) +# define NO_MD2 +# endif +# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) +# define NO_SCTP +# endif +# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) +# define NO_STORE +# endif +# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) +# define NO_UNIT_TEST +# endif +# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) +# define NO_WEAK_SSL_CIPHERS +# endif +#endif + +/* crypto/opensslconf.h.in */ + +/* Generate 80386 code? */ +#undef I386_ONLY + +#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ +#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) +#define ENGINESDIR "/usr/lib/engines" +#define OPENSSLDIR "/etc/ssl" +#endif +#endif + +#undef OPENSSL_UNISTD +#define OPENSSL_UNISTD + +#undef OPENSSL_EXPORT_VAR_AS_FUNCTION + +#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) +#define IDEA_INT unsigned int +#endif + +#if defined(HEADER_MD2_H) && !defined(MD2_INT) +#define MD2_INT unsigned int +#endif + +#if defined(HEADER_RC2_H) && !defined(RC2_INT) +/* I need to put in a mod for the alpha - eay */ +#define RC2_INT unsigned int +#endif + +#if defined(HEADER_RC4_H) +#if !defined(RC4_INT) +/* using int types make the structure larger but make the code faster + * on most boxes I have tested - up to %20 faster. */ +/* + * I don't know what does "most" mean, but declaring "int" is a must on: + * - Intel P6 because partial register stalls are very expensive; + * - elder Alpha because it lacks byte load/store instructions; + */ +#define RC4_INT unsigned int +#endif +#if !defined(RC4_CHUNK) +/* + * This enables code handling data aligned at natural CPU word + * boundary. See crypto/rc4/rc4_enc.c for further details. + */ +#undef RC4_CHUNK +#endif +#endif + +#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) +/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a + * %20 speed up (longs are 8 bytes, int's are 4). */ +#ifndef DES_LONG +#ifdef __mips_n64 +#define DES_LONG unsigned int +#else +#define DES_LONG unsigned long +#endif +#endif +#endif + +#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) +#define CONFIG_HEADER_BN_H +#ifdef __mips_n64 +#undef BN_LLONG +#else +#define BN_LLONG +#endif + +/* Should we define BN_DIV2W here? */ + +/* Only one for the following should be defined */ +#ifdef __mips_n64 +#define SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#undef THIRTY_TWO_BIT +#else +#undef SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#define THIRTY_TWO_BIT +#endif +#endif + +#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) +#define CONFIG_HEADER_RC4_LOCL_H +/* if this is defined data[i] is used instead of *data, this is a %20 + * speedup on x86 */ +#define RC4_INDEX +#endif + +#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) +#define CONFIG_HEADER_BF_LOCL_H +#undef BF_PTR +#endif /* HEADER_BF_LOCL_H */ + +#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) +#define CONFIG_HEADER_DES_LOCL_H +#ifndef DES_DEFAULT_OPTIONS +/* the following is tweaked from a config script, that is why it is a + * protected undef/define */ +#ifndef DES_PTR +#define DES_PTR +#endif + +/* This helps C compiler generate the correct code for multiple functional + * units. It reduces register dependancies at the expense of 2 more + * registers */ +#ifndef DES_RISC1 +#define DES_RISC1 +#endif + +#ifndef DES_RISC2 +#undef DES_RISC2 +#endif + +#if defined(DES_RISC1) && defined(DES_RISC2) +YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! +#endif + +/* Unroll the inner loop, this sometimes helps, sometimes hinders. + * Very mucy CPU dependant */ +#ifndef DES_UNROLL +#define DES_UNROLL +#endif + +/* These default values were supplied by + * Peter Gutman + * They are only used if nothing else has been defined */ +#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) +/* Special defines which change the way the code is built depending on the + CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find + even newer MIPS CPU's, but at the moment one size fits all for + optimization options. Older Sparc's work better with only UNROLL, but + there's no way to tell at compile time what it is you're running on */ + +#if defined( sun ) /* Newer Sparc's */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#elif defined( __ultrix ) /* Older MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined( __osf1__ ) /* Alpha */ +# define DES_PTR +# define DES_RISC2 +#elif defined ( _AIX ) /* RS6000 */ + /* Unknown */ +#elif defined( __hpux ) /* HP-PA */ + /* Unknown */ +#elif defined( __aux ) /* 68K */ + /* Unknown */ +#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ +# define DES_UNROLL +#elif defined( __sgi ) /* Newer MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#endif /* Systems-specific speed defines */ +#endif + +#endif /* DES_DEFAULT_OPTIONS */ +#endif /* HEADER_DES_LOCL_H */ +#ifdef __cplusplus +} +#endif diff --git a/secure/lib/libcrypto/opensslconf-powerpc.h b/secure/lib/libcrypto/opensslconf-powerpc.h deleted file mode 100644 index ba593ed..0000000 --- a/secure/lib/libcrypto/opensslconf-powerpc.h +++ /dev/null @@ -1,251 +0,0 @@ -/* $FreeBSD$ */ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -#ifdef __cplusplus -extern "C" { -#endif -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 -# define OPENSSL_NO_EC_NISTP_64_GCC_128 -#endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_SCTP -# define OPENSSL_NO_SCTP -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_UNIT_TEST -# define OPENSSL_NO_UNIT_TEST -#endif -#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS -# define OPENSSL_NO_WEAK_SSL_CIPHERS -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_ASM -# define OPENSSL_NO_ASM -#endif -#ifndef OPENSSL_NO_STATIC_ENGINE -# define OPENSSL_NO_STATIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) -# define NO_EC_NISTP_64_GCC_128 -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) -# define NO_SCTP -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) -# define NO_UNIT_TEST -# endif -# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) -# define NO_WEAK_SSL_CIPHERS -# endif -#endif - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/lib/engines" -#define OPENSSLDIR "/etc/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned int -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#undef RC4_CHUNK -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#define DES_LONG unsigned int -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#ifdef __powerpc64__ -#undef BN_LLONG -#else -#define BN_LLONG -#endif - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#ifdef __powerpc64__ -#define SIXTY_FOUR_BIT_LONG -#undef THIRTY_TWO_BIT -#else -#undef SIXTY_FOUR_BIT_LONG -#define THIRTY_TWO_BIT -#endif -#undef SIXTY_FOUR_BIT -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#define RC4_INDEX -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#undef BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#define DES_PTR -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#define DES_RISC1 -#endif - -#ifndef DES_RISC2 -#undef DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#define DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ -#ifdef __cplusplus -} -#endif diff --git a/secure/lib/libcrypto/opensslconf-powerpc.h.in b/secure/lib/libcrypto/opensslconf-powerpc.h.in new file mode 100644 index 0000000..f0567e1 --- /dev/null +++ b/secure/lib/libcrypto/opensslconf-powerpc.h.in @@ -0,0 +1,253 @@ +/* $FreeBSD$ */ +/* opensslconf.h */ +/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ + +#ifdef __cplusplus +extern "C" { +#endif +/* OpenSSL was configured with the following options: */ +#ifndef OPENSSL_DOING_MAKEDEPEND + + +#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 +# define OPENSSL_NO_EC_NISTP_64_GCC_128 +#endif +#ifndef OPENSSL_NO_GMP +# define OPENSSL_NO_GMP +#endif +#ifndef OPENSSL_NO_JPAKE +# define OPENSSL_NO_JPAKE +#endif +#ifndef OPENSSL_NO_KRB5 +# define OPENSSL_NO_KRB5 +#endif +#ifndef OPENSSL_NO_MD2 +# define OPENSSL_NO_MD2 +#endif +#ifndef OPENSSL_NO_SCTP +# define OPENSSL_NO_SCTP +#endif +#ifndef OPENSSL_NO_STORE +# define OPENSSL_NO_STORE +#endif +#ifndef OPENSSL_NO_UNIT_TEST +# define OPENSSL_NO_UNIT_TEST +#endif +#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS +# define OPENSSL_NO_WEAK_SSL_CIPHERS +#endif + +#endif /* OPENSSL_DOING_MAKEDEPEND */ + +#ifndef OPENSSL_THREADS +# define OPENSSL_THREADS +#endif +%%NO_ASM%%#ifndef OPENSSL_NO_ASM +%%NO_ASM%%# define OPENSSL_NO_ASM +%%NO_ASM%%#endif +#ifndef OPENSSL_NO_STATIC_ENGINE +# define OPENSSL_NO_STATIC_ENGINE +#endif + +/* The OPENSSL_NO_* macros are also defined as NO_* if the application + asks for it. This is a transient feature that is provided for those + who haven't had the time to do the appropriate changes in their + applications. */ +#ifdef OPENSSL_ALGORITHM_DEFINES +# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) +# define NO_EC_NISTP_64_GCC_128 +# endif +# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) +# define NO_GMP +# endif +# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) +# define NO_JPAKE +# endif +# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) +# define NO_KRB5 +# endif +# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) +# define NO_MD2 +# endif +# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) +# define NO_SCTP +# endif +# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) +# define NO_STORE +# endif +# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) +# define NO_UNIT_TEST +# endif +# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) +# define NO_WEAK_SSL_CIPHERS +# endif +#endif + +%%ASM%%#define OPENSSL_CPUID_OBJ +%%ASM%% +/* crypto/opensslconf.h.in */ + +/* Generate 80386 code? */ +#undef I386_ONLY + +#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ +#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) +#define ENGINESDIR "/usr/lib/engines" +#define OPENSSLDIR "/etc/ssl" +#endif +#endif + +#undef OPENSSL_UNISTD +#define OPENSSL_UNISTD + +#undef OPENSSL_EXPORT_VAR_AS_FUNCTION + +#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) +#define IDEA_INT unsigned int +#endif + +#if defined(HEADER_MD2_H) && !defined(MD2_INT) +#define MD2_INT unsigned int +#endif + +#if defined(HEADER_RC2_H) && !defined(RC2_INT) +/* I need to put in a mod for the alpha - eay */ +#define RC2_INT unsigned int +#endif + +#if defined(HEADER_RC4_H) +#if !defined(RC4_INT) +/* using int types make the structure larger but make the code faster + * on most boxes I have tested - up to %20 faster. */ +/* + * I don't know what does "most" mean, but declaring "int" is a must on: + * - Intel P6 because partial register stalls are very expensive; + * - elder Alpha because it lacks byte load/store instructions; + */ +#define RC4_INT unsigned int +#endif +#if !defined(RC4_CHUNK) +/* + * This enables code handling data aligned at natural CPU word + * boundary. See crypto/rc4/rc4_enc.c for further details. + */ +#undef RC4_CHUNK +#endif +#endif + +#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) +/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a + * %20 speed up (longs are 8 bytes, int's are 4). */ +#ifndef DES_LONG +#define DES_LONG unsigned int +#endif +#endif + +#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) +#define CONFIG_HEADER_BN_H +#ifdef __powerpc64__ +#undef BN_LLONG +#else +#define BN_LLONG +#endif + +/* Should we define BN_DIV2W here? */ + +/* Only one for the following should be defined */ +#ifdef __powerpc64__ +#define SIXTY_FOUR_BIT_LONG +#undef THIRTY_TWO_BIT +#else +#undef SIXTY_FOUR_BIT_LONG +#define THIRTY_TWO_BIT +#endif +#undef SIXTY_FOUR_BIT +#endif + +#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) +#define CONFIG_HEADER_RC4_LOCL_H +/* if this is defined data[i] is used instead of *data, this is a %20 + * speedup on x86 */ +#define RC4_INDEX +#endif + +#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) +#define CONFIG_HEADER_BF_LOCL_H +#undef BF_PTR +#endif /* HEADER_BF_LOCL_H */ + +#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) +#define CONFIG_HEADER_DES_LOCL_H +#ifndef DES_DEFAULT_OPTIONS +/* the following is tweaked from a config script, that is why it is a + * protected undef/define */ +#ifndef DES_PTR +#define DES_PTR +#endif + +/* This helps C compiler generate the correct code for multiple functional + * units. It reduces register dependancies at the expense of 2 more + * registers */ +#ifndef DES_RISC1 +#define DES_RISC1 +#endif + +#ifndef DES_RISC2 +#undef DES_RISC2 +#endif + +#if defined(DES_RISC1) && defined(DES_RISC2) +YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! +#endif + +/* Unroll the inner loop, this sometimes helps, sometimes hinders. + * Very mucy CPU dependant */ +#ifndef DES_UNROLL +#define DES_UNROLL +#endif + +/* These default values were supplied by + * Peter Gutman + * They are only used if nothing else has been defined */ +#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) +/* Special defines which change the way the code is built depending on the + CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find + even newer MIPS CPU's, but at the moment one size fits all for + optimization options. Older Sparc's work better with only UNROLL, but + there's no way to tell at compile time what it is you're running on */ + +#if defined( sun ) /* Newer Sparc's */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#elif defined( __ultrix ) /* Older MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined( __osf1__ ) /* Alpha */ +# define DES_PTR +# define DES_RISC2 +#elif defined ( _AIX ) /* RS6000 */ + /* Unknown */ +#elif defined( __hpux ) /* HP-PA */ + /* Unknown */ +#elif defined( __aux ) /* 68K */ + /* Unknown */ +#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ +# define DES_UNROLL +#elif defined( __sgi ) /* Newer MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#endif /* Systems-specific speed defines */ +#endif + +#endif /* DES_DEFAULT_OPTIONS */ +#endif /* HEADER_DES_LOCL_H */ +#ifdef __cplusplus +} +#endif diff --git a/secure/lib/libcrypto/opensslconf-sparc64.h b/secure/lib/libcrypto/opensslconf-sparc64.h deleted file mode 100644 index 2bd0b2c..0000000 --- a/secure/lib/libcrypto/opensslconf-sparc64.h +++ /dev/null @@ -1,242 +0,0 @@ -/* $FreeBSD$ */ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -#ifdef __cplusplus -extern "C" { -#endif -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 -# define OPENSSL_NO_EC_NISTP_64_GCC_128 -#endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_SCTP -# define OPENSSL_NO_SCTP -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_UNIT_TEST -# define OPENSSL_NO_UNIT_TEST -#endif -#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS -# define OPENSSL_NO_WEAK_SSL_CIPHERS -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_ASM -# define OPENSSL_NO_ASM -#endif -#ifndef OPENSSL_NO_STATIC_ENGINE -# define OPENSSL_NO_STATIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) -# define NO_EC_NISTP_64_GCC_128 -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) -# define NO_SCTP -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) -# define NO_UNIT_TEST -# endif -# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) -# define NO_WEAK_SSL_CIPHERS -# endif -#endif - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/lib/engines" -#define OPENSSLDIR "/etc/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned int -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#undef RC4_CHUNK -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#define DES_LONG unsigned int -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#undef BN_LLONG - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#define SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#undef THIRTY_TWO_BIT -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#undef RC4_INDEX -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#undef BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#define DES_PTR -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#undef DES_RISC1 -#endif - -#ifndef DES_RISC2 -#define DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#undef DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ -#ifdef __cplusplus -} -#endif diff --git a/secure/lib/libcrypto/opensslconf-sparc64.h.in b/secure/lib/libcrypto/opensslconf-sparc64.h.in new file mode 100644 index 0000000..b83d403 --- /dev/null +++ b/secure/lib/libcrypto/opensslconf-sparc64.h.in @@ -0,0 +1,244 @@ +/* $FreeBSD$ */ +/* opensslconf.h */ +/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ + +#ifdef __cplusplus +extern "C" { +#endif +/* OpenSSL was configured with the following options: */ +#ifndef OPENSSL_DOING_MAKEDEPEND + + +#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 +# define OPENSSL_NO_EC_NISTP_64_GCC_128 +#endif +#ifndef OPENSSL_NO_GMP +# define OPENSSL_NO_GMP +#endif +#ifndef OPENSSL_NO_JPAKE +# define OPENSSL_NO_JPAKE +#endif +#ifndef OPENSSL_NO_KRB5 +# define OPENSSL_NO_KRB5 +#endif +#ifndef OPENSSL_NO_MD2 +# define OPENSSL_NO_MD2 +#endif +#ifndef OPENSSL_NO_SCTP +# define OPENSSL_NO_SCTP +#endif +#ifndef OPENSSL_NO_STORE +# define OPENSSL_NO_STORE +#endif +#ifndef OPENSSL_NO_UNIT_TEST +# define OPENSSL_NO_UNIT_TEST +#endif +#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS +# define OPENSSL_NO_WEAK_SSL_CIPHERS +#endif + +#endif /* OPENSSL_DOING_MAKEDEPEND */ + +#ifndef OPENSSL_THREADS +# define OPENSSL_THREADS +#endif +%%NO_ASM%%#ifndef OPENSSL_NO_ASM +%%NO_ASM%%# define OPENSSL_NO_ASM +%%NO_ASM%%#endif +#ifndef OPENSSL_NO_STATIC_ENGINE +# define OPENSSL_NO_STATIC_ENGINE +#endif + +/* The OPENSSL_NO_* macros are also defined as NO_* if the application + asks for it. This is a transient feature that is provided for those + who haven't had the time to do the appropriate changes in their + applications. */ +#ifdef OPENSSL_ALGORITHM_DEFINES +# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) +# define NO_EC_NISTP_64_GCC_128 +# endif +# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) +# define NO_GMP +# endif +# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) +# define NO_JPAKE +# endif +# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) +# define NO_KRB5 +# endif +# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) +# define NO_MD2 +# endif +# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) +# define NO_SCTP +# endif +# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) +# define NO_STORE +# endif +# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) +# define NO_UNIT_TEST +# endif +# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) +# define NO_WEAK_SSL_CIPHERS +# endif +#endif + +%%ASM%%#define OPENSSL_CPUID_OBJ +%%ASM%% +/* crypto/opensslconf.h.in */ + +/* Generate 80386 code? */ +#undef I386_ONLY + +#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ +#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) +#define ENGINESDIR "/usr/lib/engines" +#define OPENSSLDIR "/etc/ssl" +#endif +#endif + +#undef OPENSSL_UNISTD +#define OPENSSL_UNISTD + +#undef OPENSSL_EXPORT_VAR_AS_FUNCTION + +#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) +#define IDEA_INT unsigned int +#endif + +#if defined(HEADER_MD2_H) && !defined(MD2_INT) +#define MD2_INT unsigned int +#endif + +#if defined(HEADER_RC2_H) && !defined(RC2_INT) +/* I need to put in a mod for the alpha - eay */ +#define RC2_INT unsigned int +#endif + +#if defined(HEADER_RC4_H) +#if !defined(RC4_INT) +/* using int types make the structure larger but make the code faster + * on most boxes I have tested - up to %20 faster. */ +/* + * I don't know what does "most" mean, but declaring "int" is a must on: + * - Intel P6 because partial register stalls are very expensive; + * - elder Alpha because it lacks byte load/store instructions; + */ +#define RC4_INT unsigned int +#endif +#if !defined(RC4_CHUNK) +/* + * This enables code handling data aligned at natural CPU word + * boundary. See crypto/rc4/rc4_enc.c for further details. + */ +#undef RC4_CHUNK +#endif +#endif + +#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) +/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a + * %20 speed up (longs are 8 bytes, int's are 4). */ +#ifndef DES_LONG +#define DES_LONG unsigned int +#endif +#endif + +#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) +#define CONFIG_HEADER_BN_H +#undef BN_LLONG + +/* Should we define BN_DIV2W here? */ + +/* Only one for the following should be defined */ +#define SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#undef THIRTY_TWO_BIT +#endif + +#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) +#define CONFIG_HEADER_RC4_LOCL_H +/* if this is defined data[i] is used instead of *data, this is a %20 + * speedup on x86 */ +#undef RC4_INDEX +#endif + +#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) +#define CONFIG_HEADER_BF_LOCL_H +#undef BF_PTR +#endif /* HEADER_BF_LOCL_H */ + +#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) +#define CONFIG_HEADER_DES_LOCL_H +#ifndef DES_DEFAULT_OPTIONS +/* the following is tweaked from a config script, that is why it is a + * protected undef/define */ +#ifndef DES_PTR +#define DES_PTR +#endif + +/* This helps C compiler generate the correct code for multiple functional + * units. It reduces register dependancies at the expense of 2 more + * registers */ +#ifndef DES_RISC1 +#undef DES_RISC1 +#endif + +#ifndef DES_RISC2 +#define DES_RISC2 +#endif + +#if defined(DES_RISC1) && defined(DES_RISC2) +YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! +#endif + +/* Unroll the inner loop, this sometimes helps, sometimes hinders. + * Very mucy CPU dependant */ +#ifndef DES_UNROLL +#undef DES_UNROLL +#endif + +/* These default values were supplied by + * Peter Gutman + * They are only used if nothing else has been defined */ +#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) +/* Special defines which change the way the code is built depending on the + CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find + even newer MIPS CPU's, but at the moment one size fits all for + optimization options. Older Sparc's work better with only UNROLL, but + there's no way to tell at compile time what it is you're running on */ + +#if defined( sun ) /* Newer Sparc's */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#elif defined( __ultrix ) /* Older MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined( __osf1__ ) /* Alpha */ +# define DES_PTR +# define DES_RISC2 +#elif defined ( _AIX ) /* RS6000 */ + /* Unknown */ +#elif defined( __hpux ) /* HP-PA */ + /* Unknown */ +#elif defined( __aux ) /* 68K */ + /* Unknown */ +#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ +# define DES_UNROLL +#elif defined( __sgi ) /* Newer MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#endif /* Systems-specific speed defines */ +#endif + +#endif /* DES_DEFAULT_OPTIONS */ +#endif /* HEADER_DES_LOCL_H */ +#ifdef __cplusplus +} +#endif diff --git a/secure/lib/libcrypto/opensslconf-x86.h b/secure/lib/libcrypto/opensslconf-x86.h deleted file mode 100644 index 43f62bc..0000000 --- a/secure/lib/libcrypto/opensslconf-x86.h +++ /dev/null @@ -1,271 +0,0 @@ -/* $FreeBSD$ */ -/* opensslconf.h */ -/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ - -#ifdef __cplusplus -extern "C" { -#endif -/* OpenSSL was configured with the following options: */ -#ifndef OPENSSL_DOING_MAKEDEPEND - - -#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 -# define OPENSSL_NO_EC_NISTP_64_GCC_128 -#endif -#ifndef OPENSSL_NO_GMP -# define OPENSSL_NO_GMP -#endif -#ifndef OPENSSL_NO_JPAKE -# define OPENSSL_NO_JPAKE -#endif -#ifndef OPENSSL_NO_KRB5 -# define OPENSSL_NO_KRB5 -#endif -#ifndef OPENSSL_NO_MD2 -# define OPENSSL_NO_MD2 -#endif -#ifndef OPENSSL_NO_SCTP -# define OPENSSL_NO_SCTP -#endif -#ifndef OPENSSL_NO_STORE -# define OPENSSL_NO_STORE -#endif -#ifndef OPENSSL_NO_UNIT_TEST -# define OPENSSL_NO_UNIT_TEST -#endif -#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS -# define OPENSSL_NO_WEAK_SSL_CIPHERS -#endif - -#endif /* OPENSSL_DOING_MAKEDEPEND */ - -#ifndef OPENSSL_THREADS -# define OPENSSL_THREADS -#endif -#ifndef OPENSSL_NO_STATIC_ENGINE -# define OPENSSL_NO_STATIC_ENGINE -#endif - -/* The OPENSSL_NO_* macros are also defined as NO_* if the application - asks for it. This is a transient feature that is provided for those - who haven't had the time to do the appropriate changes in their - applications. */ -#ifdef OPENSSL_ALGORITHM_DEFINES -# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) -# define NO_EC_NISTP_64_GCC_128 -# endif -# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) -# define NO_GMP -# endif -# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) -# define NO_JPAKE -# endif -# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) -# define NO_KRB5 -# endif -# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) -# define NO_MD2 -# endif -# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) -# define NO_SCTP -# endif -# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) -# define NO_STORE -# endif -# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) -# define NO_UNIT_TEST -# endif -# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) -# define NO_WEAK_SSL_CIPHERS -# endif -#endif - -#define OPENSSL_CPUID_OBJ - -/* crypto/opensslconf.h.in */ - -/* Generate 80386 code? */ -#undef I386_ONLY - -#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ -#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) -#define ENGINESDIR "/usr/lib/engines" -#define OPENSSLDIR "/etc/ssl" -#endif -#endif - -#undef OPENSSL_UNISTD -#define OPENSSL_UNISTD - -#undef OPENSSL_EXPORT_VAR_AS_FUNCTION - -#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) -#define IDEA_INT unsigned int -#endif - -#if defined(HEADER_MD2_H) && !defined(MD2_INT) -#define MD2_INT unsigned int -#endif - -#if defined(HEADER_RC2_H) && !defined(RC2_INT) -/* I need to put in a mod for the alpha - eay */ -#define RC2_INT unsigned int -#endif - -#if defined(HEADER_RC4_H) -#if !defined(RC4_INT) -/* using int types make the structure larger but make the code faster - * on most boxes I have tested - up to %20 faster. */ -/* - * I don't know what does "most" mean, but declaring "int" is a must on: - * - Intel P6 because partial register stalls are very expensive; - * - elder Alpha because it lacks byte load/store instructions; - */ -#define RC4_INT unsigned int -#endif -#if !defined(RC4_CHUNK) -/* - * This enables code handling data aligned at natural CPU word - * boundary. See crypto/rc4/rc4_enc.c for further details. - */ -#ifdef __LP64__ -#define RC4_CHUNK unsigned long -#else -#undef RC4_CHUNK -#endif -#endif -#endif - -#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) -/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a - * %20 speed up (longs are 8 bytes, int's are 4). */ -#ifndef DES_LONG -#ifdef __LP64__ -#define DES_LONG unsigned int -#else -#define DES_LONG unsigned long -#endif -#endif -#endif - -#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) -#define CONFIG_HEADER_BN_H -#ifdef __LP64__ -#undef BN_LLONG -#else -#define BN_LLONG -#endif - -/* Should we define BN_DIV2W here? */ - -/* Only one for the following should be defined */ -#ifdef __LP64__ -#define SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#undef THIRTY_TWO_BIT -#else -#undef SIXTY_FOUR_BIT_LONG -#undef SIXTY_FOUR_BIT -#define THIRTY_TWO_BIT -#endif -#endif - -#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) -#define CONFIG_HEADER_RC4_LOCL_H -/* if this is defined data[i] is used instead of *data, this is a %20 - * speedup on x86 */ -#ifdef __LP64__ -#undef RC4_INDEX -#else -#define RC4_INDEX -#endif -#endif - -#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) -#define CONFIG_HEADER_BF_LOCL_H -#undef BF_PTR -#endif /* HEADER_BF_LOCL_H */ - -#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) -#define CONFIG_HEADER_DES_LOCL_H -#ifndef DES_DEFAULT_OPTIONS -/* the following is tweaked from a config script, that is why it is a - * protected undef/define */ -#ifndef DES_PTR -#ifdef __LP64__ -#undef DES_PTR -#else -#define DES_PTR -#endif -#endif - -/* This helps C compiler generate the correct code for multiple functional - * units. It reduces register dependancies at the expense of 2 more - * registers */ -#ifndef DES_RISC1 -#ifdef __LP64__ -#undef DES_RISC1 -#else -#define DES_RISC1 -#endif -#endif - -#ifndef DES_RISC2 -#undef DES_RISC2 -#endif - -#if defined(DES_RISC1) && defined(DES_RISC2) -YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! -#endif - -/* Unroll the inner loop, this sometimes helps, sometimes hinders. - * Very mucy CPU dependant */ -#ifndef DES_UNROLL -#define DES_UNROLL -#endif - -/* These default values were supplied by - * Peter Gutman - * They are only used if nothing else has been defined */ -#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) -/* Special defines which change the way the code is built depending on the - CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find - even newer MIPS CPU's, but at the moment one size fits all for - optimization options. Older Sparc's work better with only UNROLL, but - there's no way to tell at compile time what it is you're running on */ - -#if defined( sun ) /* Newer Sparc's */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#elif defined( __ultrix ) /* Older MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined( __osf1__ ) /* Alpha */ -# define DES_PTR -# define DES_RISC2 -#elif defined ( _AIX ) /* RS6000 */ - /* Unknown */ -#elif defined( __hpux ) /* HP-PA */ - /* Unknown */ -#elif defined( __aux ) /* 68K */ - /* Unknown */ -#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ -# define DES_UNROLL -#elif defined( __sgi ) /* Newer MIPS */ -# define DES_PTR -# define DES_RISC2 -# define DES_UNROLL -#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ -# define DES_PTR -# define DES_RISC1 -# define DES_UNROLL -#endif /* Systems-specific speed defines */ -#endif - -#endif /* DES_DEFAULT_OPTIONS */ -#endif /* HEADER_DES_LOCL_H */ -#ifdef __cplusplus -} -#endif diff --git a/secure/lib/libcrypto/opensslconf-x86.h.in b/secure/lib/libcrypto/opensslconf-x86.h.in new file mode 100644 index 0000000..d1905adc --- /dev/null +++ b/secure/lib/libcrypto/opensslconf-x86.h.in @@ -0,0 +1,274 @@ +/* $FreeBSD$ */ +/* opensslconf.h */ +/* WARNING: Generated automatically from opensslconf.h.in by Configure. */ + +#ifdef __cplusplus +extern "C" { +#endif +/* OpenSSL was configured with the following options: */ +#ifndef OPENSSL_DOING_MAKEDEPEND + + +#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128 +# define OPENSSL_NO_EC_NISTP_64_GCC_128 +#endif +#ifndef OPENSSL_NO_GMP +# define OPENSSL_NO_GMP +#endif +#ifndef OPENSSL_NO_JPAKE +# define OPENSSL_NO_JPAKE +#endif +#ifndef OPENSSL_NO_KRB5 +# define OPENSSL_NO_KRB5 +#endif +#ifndef OPENSSL_NO_MD2 +# define OPENSSL_NO_MD2 +#endif +#ifndef OPENSSL_NO_SCTP +# define OPENSSL_NO_SCTP +#endif +#ifndef OPENSSL_NO_STORE +# define OPENSSL_NO_STORE +#endif +#ifndef OPENSSL_NO_UNIT_TEST +# define OPENSSL_NO_UNIT_TEST +#endif +#ifndef OPENSSL_NO_WEAK_SSL_CIPHERS +# define OPENSSL_NO_WEAK_SSL_CIPHERS +#endif + +#endif /* OPENSSL_DOING_MAKEDEPEND */ + +#ifndef OPENSSL_THREADS +# define OPENSSL_THREADS +#endif +%%NO_ASM%%#ifndef OPENSSL_NO_ASM +%%NO_ASM%%# define OPENSSL_NO_ASM +%%NO_ASM%%#endif +#ifndef OPENSSL_NO_STATIC_ENGINE +# define OPENSSL_NO_STATIC_ENGINE +#endif + +/* The OPENSSL_NO_* macros are also defined as NO_* if the application + asks for it. This is a transient feature that is provided for those + who haven't had the time to do the appropriate changes in their + applications. */ +#ifdef OPENSSL_ALGORITHM_DEFINES +# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128) +# define NO_EC_NISTP_64_GCC_128 +# endif +# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP) +# define NO_GMP +# endif +# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE) +# define NO_JPAKE +# endif +# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5) +# define NO_KRB5 +# endif +# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2) +# define NO_MD2 +# endif +# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP) +# define NO_SCTP +# endif +# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE) +# define NO_STORE +# endif +# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST) +# define NO_UNIT_TEST +# endif +# if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS) +# define NO_WEAK_SSL_CIPHERS +# endif +#endif + +%%ASM%%#define OPENSSL_CPUID_OBJ +%%ASM%% +/* crypto/opensslconf.h.in */ + +/* Generate 80386 code? */ +#undef I386_ONLY + +#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */ +#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR) +#define ENGINESDIR "/usr/lib/engines" +#define OPENSSLDIR "/etc/ssl" +#endif +#endif + +#undef OPENSSL_UNISTD +#define OPENSSL_UNISTD + +#undef OPENSSL_EXPORT_VAR_AS_FUNCTION + +#if defined(HEADER_IDEA_H) && !defined(IDEA_INT) +#define IDEA_INT unsigned int +#endif + +#if defined(HEADER_MD2_H) && !defined(MD2_INT) +#define MD2_INT unsigned int +#endif + +#if defined(HEADER_RC2_H) && !defined(RC2_INT) +/* I need to put in a mod for the alpha - eay */ +#define RC2_INT unsigned int +#endif + +#if defined(HEADER_RC4_H) +#if !defined(RC4_INT) +/* using int types make the structure larger but make the code faster + * on most boxes I have tested - up to %20 faster. */ +/* + * I don't know what does "most" mean, but declaring "int" is a must on: + * - Intel P6 because partial register stalls are very expensive; + * - elder Alpha because it lacks byte load/store instructions; + */ +#define RC4_INT unsigned int +#endif +#if !defined(RC4_CHUNK) +/* + * This enables code handling data aligned at natural CPU word + * boundary. See crypto/rc4/rc4_enc.c for further details. + */ +#ifdef __LP64__ +#define RC4_CHUNK unsigned long +#else +#undef RC4_CHUNK +#endif +#endif +#endif + +#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG) +/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a + * %20 speed up (longs are 8 bytes, int's are 4). */ +#ifndef DES_LONG +#ifdef __LP64__ +#define DES_LONG unsigned int +#else +#define DES_LONG unsigned long +#endif +#endif +#endif + +#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H) +#define CONFIG_HEADER_BN_H +#ifdef __LP64__ +#undef BN_LLONG +#else +#define BN_LLONG +#endif + +/* Should we define BN_DIV2W here? */ + +/* Only one for the following should be defined */ +#ifdef __LP64__ +#define SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#undef THIRTY_TWO_BIT +#else +#undef SIXTY_FOUR_BIT_LONG +#undef SIXTY_FOUR_BIT +#define THIRTY_TWO_BIT +#endif +#endif + +#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H) +#define CONFIG_HEADER_RC4_LOCL_H +/* if this is defined data[i] is used instead of *data, this is a %20 + * speedup on x86 */ +#ifdef __LP64__ +#undef RC4_INDEX +#else +#define RC4_INDEX +#endif +#endif + +#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H) +#define CONFIG_HEADER_BF_LOCL_H +#undef BF_PTR +#endif /* HEADER_BF_LOCL_H */ + +#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H) +#define CONFIG_HEADER_DES_LOCL_H +#ifndef DES_DEFAULT_OPTIONS +/* the following is tweaked from a config script, that is why it is a + * protected undef/define */ +#ifndef DES_PTR +#ifdef __LP64__ +#undef DES_PTR +#else +#define DES_PTR +#endif +#endif + +/* This helps C compiler generate the correct code for multiple functional + * units. It reduces register dependancies at the expense of 2 more + * registers */ +#ifndef DES_RISC1 +#ifdef __LP64__ +#undef DES_RISC1 +#else +#define DES_RISC1 +#endif +#endif + +#ifndef DES_RISC2 +#undef DES_RISC2 +#endif + +#if defined(DES_RISC1) && defined(DES_RISC2) +YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!! +#endif + +/* Unroll the inner loop, this sometimes helps, sometimes hinders. + * Very mucy CPU dependant */ +#ifndef DES_UNROLL +#define DES_UNROLL +#endif + +/* These default values were supplied by + * Peter Gutman + * They are only used if nothing else has been defined */ +#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL) +/* Special defines which change the way the code is built depending on the + CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find + even newer MIPS CPU's, but at the moment one size fits all for + optimization options. Older Sparc's work better with only UNROLL, but + there's no way to tell at compile time what it is you're running on */ + +#if defined( sun ) /* Newer Sparc's */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#elif defined( __ultrix ) /* Older MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined( __osf1__ ) /* Alpha */ +# define DES_PTR +# define DES_RISC2 +#elif defined ( _AIX ) /* RS6000 */ + /* Unknown */ +#elif defined( __hpux ) /* HP-PA */ + /* Unknown */ +#elif defined( __aux ) /* 68K */ + /* Unknown */ +#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */ +# define DES_UNROLL +#elif defined( __sgi ) /* Newer MIPS */ +# define DES_PTR +# define DES_RISC2 +# define DES_UNROLL +#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */ +# define DES_PTR +# define DES_RISC1 +# define DES_UNROLL +#endif /* Systems-specific speed defines */ +#endif + +#endif /* DES_DEFAULT_OPTIONS */ +#endif /* HEADER_DES_LOCL_H */ +#ifdef __cplusplus +} +#endif -- cgit v1.1