From 1541af42f12f8570fb332516efee8f1e030c3e46 Mon Sep 17 00:00:00 2001 From: ru Date: Sun, 13 Feb 2005 22:25:33 +0000 Subject: Expand *n't contractions. --- sbin/adjkerntz/adjkerntz.8 | 2 +- sbin/badsect/badsect.8 | 2 +- sbin/camcontrol/camcontrol.8 | 24 ++++++++++++------------ sbin/ip6fw/ip6fw.8 | 10 +++++----- sbin/ipfw/ipfw.8 | 8 ++++---- sbin/mount_cd9660/mount_cd9660.8 | 2 +- sbin/newfs_msdos/newfs_msdos.8 | 2 +- sbin/nos-tun/nos-tun.8 | 4 ++-- sbin/restore/restore.8 | 2 +- sbin/route/route.8 | 2 +- sbin/spppcontrol/spppcontrol.8 | 4 ++-- sbin/tunefs/tunefs.8 | 2 +- 12 files changed, 32 insertions(+), 32 deletions(-) (limited to 'sbin') diff --git a/sbin/adjkerntz/adjkerntz.8 b/sbin/adjkerntz/adjkerntz.8 index fc2a064..5591f2e 100644 --- a/sbin/adjkerntz/adjkerntz.8 +++ b/sbin/adjkerntz/adjkerntz.8 @@ -134,7 +134,7 @@ This form should be invoked from root's .Xr crontab 5 every half hour between midnight and 5am, when most modern time zone changes occur. -Warning: don't use the +Warning: do not use the .Fl s option in a .Xr crontab 5 diff --git a/sbin/badsect/badsect.8 b/sbin/badsect/badsect.8 index 10812b6..293e958 100644 --- a/sbin/badsect/badsect.8 +++ b/sbin/badsect/badsect.8 @@ -51,7 +51,7 @@ makes the pack appear perfect, and such packs can then be copied with The technique used by this program is also less general than bad block forwarding, as .Nm -can't make amends for +cannot make amends for bad blocks in the i-list of file systems or in swap areas. .Pp On some disks, diff --git a/sbin/camcontrol/camcontrol.8 b/sbin/camcontrol/camcontrol.8 index 453999e..abd30e0 100644 --- a/sbin/camcontrol/camcontrol.8 +++ b/sbin/camcontrol/camcontrol.8 @@ -285,7 +285,7 @@ argument), the given bus (XPT_SCAN_BUS), or bus:target:lun The user may specify a scan of all busses, a single bus, or a lun. Scanning all luns -on a target isn't supported. +on a target is not supported. .It Ic reset Tell the kernel to reset all busses in the system (with the .Ar all @@ -313,14 +313,14 @@ required. Most drives support the physical sector format. Some drives support the logical block format. -Many drives, if they don't support the +Many drives, if they do not support the requested format, return the data in an alternate format, along with sense -information indicating that the requested data format isn't supported. +information indicating that the requested data format is not supported. The .Nm utility attempts to detect this, and print out whatever format the drive returns. -If the drive uses a non-standard sense code to report that it doesn't +If the drive uses a non-standard sense code to report that it does not support the requested format, .Nm will probably see the error as a failure to complete the request. @@ -492,7 +492,7 @@ switch for this .Nm subcommand is described below. .It Fl q -Be quiet, and don't report the number of tags. +Be quiet, and do not report the number of tags. This is generally used when setting the number of tags. .It Fl v @@ -566,7 +566,7 @@ The meaning of the flag for the .Ic negotiate command is described below. -Also, some controller drivers don't support +Also, some controller drivers do not support setting negotiation parameters, even if the underlying controller supports negotiation changes. Some controllers, such as the Advansys wide @@ -584,9 +584,9 @@ Enable or disable disconnection. .It Fl O Ar offset Set the command delay offset. .It Fl q -Be quiet, don't print anything. +Be quiet, do not print anything. This is generally useful when you want to -set a parameter, but don't want any status information. +set a parameter, but do not want any status information. .It Fl R Ar syncrate Change the synchronization rate for a device. The sync rate is a floating @@ -655,7 +655,7 @@ Some hard disks will complete a format operation in a very short period of time (on the order of 5 minutes or less). This is often because the drive -doesn't really support the FORMAT UNIT command -- it just accepts the +does not really support the FORMAT UNIT command -- it just accepts the command, waits a few minutes and then returns it. .Pp The @@ -669,7 +669,7 @@ arguments can be useful for scripts. .Pp .Bl -tag -width 6n .It Fl q -Be quiet, don't print any status messages. +Be quiet, do not print any status messages. This option will not disable the questions, however. To disable questions, use the @@ -697,7 +697,7 @@ will issue a non-immediate format command, and will be unable to print any information to let the user know what percentage of the disk has been formatted. .It Fl y -Don't ask any questions. +Do not ask any questions. By default, .Nm will ask the user if he/she really wants to format the disk in question, @@ -853,7 +853,7 @@ in .Sh AUTHORS .An Kenneth Merry Aq ken@FreeBSD.org .Sh BUGS -The code that parses the generic command line arguments doesn't know that +The code that parses the generic command line arguments does not know that some of the subcommands take multiple arguments. So if, for instance, you tried something like this: diff --git a/sbin/ip6fw/ip6fw.8 b/sbin/ip6fw/ip6fw.8 index bce358c..9d296cf 100644 --- a/sbin/ip6fw/ip6fw.8 +++ b/sbin/ip6fw/ip6fw.8 @@ -104,7 +104,7 @@ and .Xr m4 1 . If .Ar preproc -doesn't start with a slash +does not start with a slash .Pq Ql / as its first character, the usual .Ev PATH @@ -168,7 +168,7 @@ One rule is always present: 65535 deny all from any to any .Ed .Pp -This rule is the default policy, i.e., don't allow anything at all. +This rule is the default policy, i.e., do not allow anything at all. Your job in setting up rules is to modify this policy to match your needs. .Pp @@ -180,7 +180,7 @@ See also .Dq show command. .It Fl f -Don't ask for confirmation for commands that can cause problems if misused +Do not ask for confirmation for commands that can cause problems if misused (ie; flush). .Ar Note , if there is no tty associated with the process, this is implied. @@ -497,7 +497,7 @@ Most connections need packets going in both directions. Remember to test very carefully. It is a good idea to be near the console when doing this. .It -Don't forget the loopback interface. +Do not forget the loopback interface. .El .Sh FINE POINTS There is one kind of packet that the firewall will always discard, @@ -576,7 +576,7 @@ When using it for the first time, work on the console of the computer, and do .Em NOT -do anything you don't understand. +do anything you do not understand. .Pp When manipulating/adding chain entries, service and protocol names are not accepted. diff --git a/sbin/ipfw/ipfw.8 b/sbin/ipfw/ipfw.8 index 190be14..6c053da 100644 --- a/sbin/ipfw/ipfw.8 +++ b/sbin/ipfw/ipfw.8 @@ -230,7 +230,7 @@ While listing, if the .Fl d option was specified, also show expired dynamic rules. .It Fl f -Don't ask for confirmation for commands that can cause problems +Do not ask for confirmation for commands that can cause problems if misused, .No i.e. Cm flush . If there is no tty associated with the process, this is implied. @@ -303,7 +303,7 @@ and .Xr m4 1 . If .Ar preproc -doesn't start with a slash +does not start with a slash .Pq Ql / as its first character, the usual .Ev PATH @@ -1771,7 +1771,7 @@ If you cannot be near the console, use an auto-recovery script such as the one in .Pa /usr/share/examples/ipfw/change_rules.sh . .It -Don't forget the loopback interface. +Do not forget the loopback interface. .El .Sh FINE POINTS .Bl -bullet @@ -1827,7 +1827,7 @@ A socket bound to the specified port will receive all packets diverted to that port. If no socket is bound to the destination port, or if the divert module is -not loaded, or if the kernel wasn't compiled with divert socket support, +not loaded, or if the kernel was not compiled with divert socket support, the packets are dropped. .Sh SYSCTL VARIABLES A set of diff --git a/sbin/mount_cd9660/mount_cd9660.8 b/sbin/mount_cd9660/mount_cd9660.8 index 7970ddd..a2de093 100644 --- a/sbin/mount_cd9660/mount_cd9660.8 +++ b/sbin/mount_cd9660/mount_cd9660.8 @@ -153,7 +153,7 @@ in 2003. POSIX device node mapping is currently not supported. .Pp Version numbers are not stripped if Rockridge extensions are in use. -In this case, accessing files that don't have Rockridge names without +In this case, accessing files that do not have Rockridge names without version numbers gets the one with the lowest version number and not the one with the highest. .Pp diff --git a/sbin/newfs_msdos/newfs_msdos.8 b/sbin/newfs_msdos/newfs_msdos.8 index a7de7ab..024ed1c 100644 --- a/sbin/newfs_msdos/newfs_msdos.8 +++ b/sbin/newfs_msdos/newfs_msdos.8 @@ -70,7 +70,7 @@ to determine geometry, if required. The options are as follow: .Bl -tag -width indent .It Fl N -Don't create a file system: just print out parameters. +Do not create a file system: just print out parameters. .It Fl B Ar boot Get bootstrap from file. .It Fl F Ar FAT-type diff --git a/sbin/nos-tun/nos-tun.8 b/sbin/nos-tun/nos-tun.8 index c5f1989..405d430 100644 --- a/sbin/nos-tun/nos-tun.8 +++ b/sbin/nos-tun/nos-tun.8 @@ -54,7 +54,7 @@ on the cisco. This is because the tunnel is a point-to-point interface in the .Fx -end, a concept cisco doesn't really implement. +end, a concept cisco does not really implement. .Pp .Ar Protocol number sets tunnel mode. @@ -89,4 +89,4 @@ wrote the man-page. .An Isao SEKI Aq iseki@gongon.com added a new flag, IP protocol number. .Sh BUGS -We don't allow for setting our source address for multihomed machines. +We do not allow for setting our source address for multihomed machines. diff --git a/sbin/restore/restore.8 b/sbin/restore/restore.8 index 938de5f..42d59a09 100644 --- a/sbin/restore/restore.8 +++ b/sbin/restore/restore.8 @@ -506,4 +506,4 @@ operation that may have been interrupted, the temporary files should be the same across different processes. In all other cases, the files are unique because it is possible to have two different dumps started at the same time, and separate -operations shouldn't conflict with each other. +operations should not conflict with each other. diff --git a/sbin/route/route.8 b/sbin/route/route.8 index ba17bcc..414d710 100644 --- a/sbin/route/route.8 +++ b/sbin/route/route.8 @@ -383,7 +383,7 @@ on a directly-connected network. The next-hop gateway must be given. .It "not in table" A delete operation was attempted for an entry which -wasn't present in the tables. +was not present in the tables. .It "routing table overflow" An add operation was attempted, but the system was low on resources and was unable to allocate memory diff --git a/sbin/spppcontrol/spppcontrol.8 b/sbin/spppcontrol/spppcontrol.8 index 0b038c2..a237936 100644 --- a/sbin/spppcontrol/spppcontrol.8 +++ b/sbin/spppcontrol/spppcontrol.8 @@ -141,7 +141,7 @@ For CHAP, this will be used to compute the response hash value, based on remote's challenge. For PAP, it will be transmitted as plain text together with the system name. -Don't forget to quote the secrets from +Do not forget to quote the secrets from the shell if they contain shell metacharacters (or white space). .It Va myauthkey Ns Li = Ns Ar secret Same as above. @@ -170,7 +170,7 @@ Only meaningful with CHAP. Do not re-challenge peer once the initial CHAP handshake was successful. Used to work around broken peer -implementations that can't grok being re-challenged once the +implementations that cannot grok being re-challenged once the connection is up. .It Ar rechallenge With CHAP, send re-challenges at random intervals while the connection diff --git a/sbin/tunefs/tunefs.8 b/sbin/tunefs/tunefs.8 index 3a1dd51..ac8641c 100644 --- a/sbin/tunefs/tunefs.8 +++ b/sbin/tunefs/tunefs.8 @@ -165,4 +165,4 @@ This utility should work on active file systems. .\" Take this out and a Unix Daemon will dog your steps from now until .\" the time_t's wrap around. .Pp -You can tune a file system, but you can't tune a fish. +You can tune a file system, but you cannot tune a fish. -- cgit v1.1