From 5e934fe1f7b01c50b1d8b916e04a0a67e3fb1952 Mon Sep 17 00:00:00 2001 From: ken Date: Sun, 4 Jun 2000 02:43:55 +0000 Subject: Eliminate the default device name (da) and unit number (0) in camcontrol. This may break some scripts, but with the number of ways users can damage a system with this tool, it's important to make sure they specify which device they want to talk to. Suggested by: joerg --- sbin/camcontrol/camcontrol.8 | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'sbin/camcontrol/camcontrol.8') diff --git a/sbin/camcontrol/camcontrol.8 b/sbin/camcontrol/camcontrol.8 index 0b003c9..6d2c59f 100644 --- a/sbin/camcontrol/camcontrol.8 +++ b/sbin/camcontrol/camcontrol.8 @@ -202,13 +202,12 @@ the code will generally attempt to spin up drives that are not spinning. It may take some other actions, depending upon the sense code returned from the command. .It Fl n Ar dev_name -Specify the device type to operate on. The default is -.Em da . +Specify the device type to operate on, e.g. "da", "cd". .It Fl t Ar timeout SCSI command timeout in seconds. This overrides the default timeout for any given command. .It Fl u Ar unit_number -Specify the device unit number. The default is 0. +Specify the device unit number, e.g. "1", "5". .It Fl v Be verbose, print out sense information for failed SCSI commands. .El @@ -616,7 +615,7 @@ are the CAM application passthrough devices. Eject the CD from cd1, and print SCSI sense information if the command fails. .Pp -.Dl camcontrol tur +.Dl camcontrol tur da0 .Pp Send the SCSI test unit ready command to da0. .Nm camcontrol -- cgit v1.1