From e2640b895bd552492b43cfb1ef684f73e73b1248 Mon Sep 17 00:00:00 2001 From: wilko Date: Sun, 29 Apr 2001 13:27:26 +0000 Subject: Remove most of the CPU: sections, and reflect SMP capability of FreeBSD/alpha. --- release/texts/alpha/HARDWARE.TXT | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'release') diff --git a/release/texts/alpha/HARDWARE.TXT b/release/texts/alpha/HARDWARE.TXT index 9029af0..ddc49f4 100644 --- a/release/texts/alpha/HARDWARE.TXT +++ b/release/texts/alpha/HARDWARE.TXT @@ -1242,10 +1242,6 @@ Starting with SRM firmware version 5.9 you can boot from Adaptec 2940-series adapters in addition to the usual set of Qlogic and Symbios/NCR adapters. This unfortunately does not include the embedded Adaptec SCSI chips. -CPU: -DS20 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable -and will only use the primary CPU. - Memory: If you are using banks of DIMMs of different sizes the biggest DIMMs should be installed in the DIMM slots marked '0' on the mainboard. The DIMM slots @@ -1288,10 +1284,6 @@ Features: Memory: A maximum of 2Gb memory is supported by FreeBSD. -CPU: -DP264 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable -and will only use the primary CPU. - Embedded SCSI: The on-board Adaptec is not bootable but works with FreeBSD 4.0 and later as a datadisk-only SCSI bus. @@ -1338,8 +1330,6 @@ CPU: The CPUs spec-ed as 200 MHz are in reality running at 190 MHz. Maximum number of CPUs is 4. All CPUs must be of the same type/speed. -Currently FreeBSD only uses one CPU in a multiprocessor machine. - If any of the processors are ever marked as failed, they will remain marked as failed even after they have been replaced (or reseated) until you issue the command 'clear_error all' on the SRM console and @@ -1460,9 +1450,6 @@ Features: - 1 parallel port - PS/2 style keyboard & mouse port -CPU: -Rawhide is a multiprocessor machine. Currently FreeBSD only uses one CPU. - Memory: Rawhide uses a maximum of 8 RAM modules. These modules are used in pairs and supply 72 bits to the bus (this includes ECC bits). Memory can be EDO @@ -1522,9 +1509,6 @@ Features: - 1 parallel port - PS/2 style keyboard & mouse port -CPU: -AS1200 is a multiprocessor-capable machine. Currently FreeBSD only uses one CPU. - Memory: AS1200 uses 2 memory daughter cards. On each of these cards are 8 DIMM slots. DIMMs must be installed in pairs. The maximum memory size is 4 Gbytes. @@ -1590,10 +1574,6 @@ Memory: FreeBSD supports (and has been tested with) up to 2 Gbytes of memory on TurboLaser. -CPU: -TurboLaser is very much a multiprocessor machine. Currently FreeBSD only -uses one CPU. - Expansion: Only PCI expansion is supported on FreeBSD. XMI or Futurebus+ (which are AS8400 only) are both unsupported. @@ -1797,10 +1777,6 @@ Features: - embedded Symbios 53C1000 Ultra160 SCSI controller - expansion: 2 64 bit PCI slots (2/3 length) -CPU: -The CS20 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable -and will only use the primary CPU. - Console: SRM console code comes standard with the CS20. The SRM lives in 2Mbytes of flash ROM. -- cgit v1.1