From 672d7f757de0bafdec3ec37bc9fcb3a2737fe08f Mon Sep 17 00:00:00 2001
From: rgrimes <rgrimes@FreeBSD.org>
Date: Sat, 16 Oct 1993 12:05:51 +0000
Subject: Fix the title up on this, removed the date and format it to match the
 RELEASE NOTES.

Adaptec controllers are now 154x and 174x series, no more reference
to specific models.  Revamp the CSI hard disk controller section in
general to be more user readable.

Add the fact that the Mitsumi CDROM controller and drive are now
supported.

Add a note that the Intel 82501 serial chip is NOT supported.

Floppy controller is fd0, not fdc0, same for wd disk controller.
---
 etc/etc.i386/install_notes | 36 ++++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)

(limited to 'etc')

diff --git a/etc/etc.i386/install_notes b/etc/etc.i386/install_notes
index 0cc86f6..e8ac5b5 100644
--- a/etc/etc.i386/install_notes
+++ b/etc/etc.i386/install_notes
@@ -1,5 +1,6 @@
-FreeBSD 1.0
-INSTALLATION NOTES <2.00, 10 September 1993>
+                             INSTALLATION NOTES
+                                  FreeBSD
+                                Release 1.0
 
 These notes have been prepared from those written originally for NetBSD
 0.9. The conversion was done by someone who has had experience with
@@ -137,40 +138,55 @@ allow you to run X and/or compile, but it's extremely slow.)
 Supported devices include:
 
 	Standard floppy controllers
+
 	Standard hard disk controllers:
 		MFM
 		ESDI
 		IDE
 		RLL
+
 	SCSI hard disk controllers:
-		Adaptec AHA-1542{A,B,C}, -1742		[kcopy-ah-floppy]
-		Bustek 742 (EISA) Ultrastor 14f and 34f [kcopy-bt-floppy]
+		Adaptec 154x series *			[kcopy-ah-floppy]
+		Adaptec 174x series
+		Buslogic 545S
+		Bustek 742 (EISA)			[kcopy-bt-floppy]
+		DTC 3290 in 1542 emulation mode *
+		Ultrastor 14f and 34f
+
+		* Your system can NOT have more than 16MB of memory with
+		  these controllers.
+
 	Display Adaptors:
 		MDA
 		CGA
 		VGA (and SVGA)
 		HGC
+
 	Serial communications ports
 		8250
 		16450
 		16550A
 		[4-port multi-serial cards - require kernel built
 		with MULTI_PORT option]
+		[We do not support the Intel 82501 serial chip used
+		in some PC's at this time]
+
 	Ethernet controllers
 		SMC/WD 8003, 8013, and equivalents
 			(including the SMC "Elite" series)
 		Novell NE1000, NE2000
 		3COM 3c503
 		ISOLAN ISOLink
+
 	Tape drives:
 		QIC-02 format tape drives
 		most SCSI tape/DAT drives
 		[an early QIC-40 or QIC-80 tape driver exists,
 		but is not yet incorporated into FreeBSD]
+
 	CD-ROM drives:
-		most SCSI CD-ROM drives
-		[an early MITSUMI non-SCSI CD-ROM driver exists,
-		but is not yet incorporated into FreeBSD]
+		Mitsumi CDROM drive with Mitsumi Controller
+		Most SCSI CD-ROM drives on a supported SCSI controller
 
 To be detected by the distributed kernels, the devices must
 be configured as follows: (Note: IRQ 9 is the same as IRQ 2
@@ -178,10 +194,10 @@ on ISA/EISA based machines)
 
 Device		Name	Port	IRQ	DRQ	 Misc
 ------		----	----	---	---	 ----
-Floppy Cntlr.	fdc0	0x3f0	6	2
+Floppy Cntlr.	fd0	0x3f0	6	2
 
 Std. Hard Disk Cntlr.
-		wdc0	0x1f0	14
+		wd0	0x1f0	14
 
 AHA-154x SCSI Cntlr.	0x330	11	5	 [kcopy-ah-floppy]
 
@@ -1036,4 +1052,4 @@ THANKS FOR USING THIS; that's what makes it all worthwhile.
  as they will end up in our personal mail spools.  We will be
  happy to make other arrangements]
 
-This is $Id: install_notes,v 1.8 1993/10/01 04:43:56 rgrimes Exp $
+This is $Id: install_notes,v 1.9 1993/10/01 19:22:43 rgrimes Exp $
-- 
cgit v1.1