From 08320280c671000afa24235eaab7869ae2dbd736 Mon Sep 17 00:00:00 2001
From: hrs <hrs@FreeBSD.org>
Date: Tue, 13 Sep 2011 00:06:11 +0000
Subject: Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE
 (r225485).  When setting an interface name to it, the following
 configurations will be enabled:

 1. "no_radr" is set to all IPv6 interfaces automatically.

 2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif.  This is
    done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
    means you can manually supersede this configuration if necessary).

 3. The node will add RA-sending routers to the default router list
    even if net.inet6.ip6.forwarding=1.

This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network).  To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.

Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table.  To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.

Approved by:	re (bz)
---
 etc/defaults/rc.conf |  3 +++
 etc/network.subr     |  6 ++++++
 etc/rc.d/netoptions  | 13 +++++++++++++
 3 files changed, 22 insertions(+)

(limited to 'etc')

diff --git a/etc/defaults/rc.conf b/etc/defaults/rc.conf
index d467eaa..d959f20 100644
--- a/etc/defaults/rc.conf
+++ b/etc/defaults/rc.conf
@@ -468,6 +468,9 @@ ipv6_static_routes=""		# Set to static route list (or leave empty).
 				#  route toward loopback interface.
 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
 ipv6_gateway_enable="NO"	# Set to YES if this host will be a gateway.
+ipv6_cpe_wanif="NO"		# Set to the upstram interface name if this
+				# node will work as a router to forward IPv6
+				# packets not explicitly addressed to itself.
 ipv6_privacy="NO"		# Use privacy address on RA-receiving IFs
 				# (RFC 4193)
 
diff --git a/etc/network.subr b/etc/network.subr
index 44a5892..ae3db56 100644
--- a/etc/network.subr
+++ b/etc/network.subr
@@ -113,6 +113,12 @@ ifconfig_up()
 			;;
 		esac
 
+		case $ipv6_cpe_wanif in
+		$1)
+			_ipv6_opts="${_ipv6_opts} -no_radr accept_rtadv"
+		;;
+		esac
+
 		if [ -n "${_ipv6_opts}" ]; then
 			ifconfig $1 inet6 ${_ipv6_opts}
 		fi
diff --git a/etc/rc.d/netoptions b/etc/rc.d/netoptions
index 09ed6ef..1547ade 100755
--- a/etc/rc.d/netoptions
+++ b/etc/rc.d/netoptions
@@ -106,6 +106,19 @@ netoptions_inet6()
 		${SYSCTL} net.inet6.ip6.use_tempaddr=1 >/dev/null
 		${SYSCTL} net.inet6.ip6.prefer_tempaddr=1 >/dev/null
 	fi
+
+	case $ipv6_cpe_wanif in
+	""|[Nn][Oo]|[Nn][Oo][Nn][Ee]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
+		${SYSCTL} net.inet6.ip6.no_radr=0 >/dev/null
+		${SYSCTL} net.inet6.ip6.rfc6204w3=0 >/dev/null
+	;;
+	*)	
+		netoptions_init
+		echo -n " IPv6 CPE WANIF=${ipv6_cpe_wanif}"
+		${SYSCTL} net.inet6.ip6.no_radr=1 >/dev/null
+		${SYSCTL} net.inet6.ip6.rfc6204w3=1 >/dev/null
+	;;
+	esac
 }
 
 load_rc_config $name
-- 
cgit v1.1