From b1d537a11d2a680fc34947d3883280e75b3d6b71 Mon Sep 17 00:00:00 2001
From: des <des@FreeBSD.org>
Date: Mon, 23 Sep 2013 04:36:51 +0000
Subject: Add a setup script for unbound(8) called local-unbound-setup.  It
 generates a configuration suitable for running unbound as a caching
 forwarding resolver, and configures resolvconf(8) to update unbound's list of
 forwarders in addition to /etc/resolv.conf.  The initial list is taken from
 the existing resolv.conf, which is rewritten to point to localhost. 
 Alternatively, a list of forwarders can be provided on the command line.

To assist this script, add an rc.subr command called "enabled" which
does nothing except return 0 if the service is enabled and 1 if it is
not, without going through the usual checks.  We should consider doing
the same for "status", which is currently pointless.

Add an rc script for unbound, called local_unbound.  If there is no
configuration file, the rc script runs local-unbound-setup to generate
one.

Note that these scripts place the unbound configuration files in
/var/unbound rather than /etc/unbound.  This is necessary so that
unbound can reload its configuration while chrooted.  We should
probably provide symlinks in /etc.

Approved by:	re (blanket)
---
 etc/rc.d/Makefile      |  5 +++
 etc/rc.d/local_unbound | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 96 insertions(+)
 create mode 100755 etc/rc.d/local_unbound

(limited to 'etc/rc.d')

diff --git a/etc/rc.d/Makefile b/etc/rc.d/Makefile
index 153918d..82775f9 100644
--- a/etc/rc.d/Makefile
+++ b/etc/rc.d/Makefile
@@ -150,6 +150,7 @@ FILES=	DAEMON \
 	tmp \
 	${_ubthidhci} \
 	ugidfw \
+	${_unbound} \
 	${_utx} \
 	var \
 	virecover \
@@ -184,6 +185,10 @@ _nscd=		nscd
 _ubthidhci=	ubthidhci
 .endif
 
+.if ${MK_UNBOUND} != "no"
+_unbound=	local_unbound
+.endif
+
 .if ${MK_UTMPX} != "no"
 _utx=		utx
 .endif
diff --git a/etc/rc.d/local_unbound b/etc/rc.d/local_unbound
new file mode 100755
index 0000000..899e356
--- /dev/null
+++ b/etc/rc.d/local_unbound
@@ -0,0 +1,91 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: local_unbound
+# REQUIRE: SERVERS cleanvar
+# KEYWORD: shutdown
+
+. /etc/rc.subr
+
+name="local_unbound"
+desc="local caching forwarding resolver"
+rcvar="local_unbound_enable"
+
+command="/usr/sbin/unbound"
+extra_commands="anchor configtest reload setup"
+start_precmd="local_unbound_prestart"
+reload_precmd="local_unbound_configtest"
+anchor_cmd="local_unbound_anchor"
+configtest_cmd="local_unbound_configtest"
+setup_cmd="local_unbound_setup"
+pidfile="/var/run/${name}.pid"
+
+: ${local_unbound_workdir:=/var/unbound}
+: ${local_unbound_config:=${local_unbound_workdir}/unbound.conf}
+: ${local_unbound_flags:=-c${local_unbound_config}}
+: ${local_unbound_forwardconf:=${local_unbound_workdir}/forward.conf}
+: ${local_unbound_anchor:=${local_unbound_workdir}/root.key}
+: ${local_unbound_forwarders:=}
+
+load_rc_config $name
+
+do_as_unbound()
+{
+	echo "$@" | su -m unbound
+}
+
+#
+# Retrieve or update the DNSSEC root anchor
+#
+local_unbound_anchor()
+{
+	do_as_unbound /usr/sbin/unbound-anchor -a ${local_unbound_anchor}
+	# we can't trust the exit code - check if the file exists
+	[ -f ${local_unbound_anchor} ]
+}
+
+#
+# Check the unbound configuration file
+#
+local_unbound_configtest()
+{
+	do_as_unbound /usr/sbin/unbound-checkconf ${local_unbound_config}
+}
+
+#
+# Create the unbound configuration file and update resolv.conf to
+# point to unbound.
+#
+local_unbound_setup()
+{
+	echo "Performing initial setup."
+	/usr/sbin/local-unbound-setup -n \
+	    -u unbound \
+	    -w ${local_unbound_workdir} \
+	    -c ${local_unbound_config} \
+	    -f ${local_unbound_forwardconf} \
+	    -a ${local_unbound_anchor} \
+	    ${local_unbound_forwarders}
+}
+
+#
+# Before starting, check that the configuration file and root anchor
+# exist.  If not, attempt to generate them.
+#
+local_unbound_prestart()
+{
+	# Create configuration file
+	if [ ! -f ${local_unbound_config} ] ; then
+		run_rc_command setup
+	fi
+
+	# Retrieve DNSSEC root key
+	if [ ! -f ${local_unbound_anchor} ] ; then
+		run_rc_command anchor
+	fi
+}
+
+load_rc_config $name
+run_rc_command "$1"
-- 
cgit v1.1