From d226c7e9b479874528755b812ab5b50c2105a949 Mon Sep 17 00:00:00 2001 From: hoek Date: Sun, 22 Aug 1999 19:42:40 +0000 Subject: Grammar and formatting touch-ups to comments. --- etc/etc.i386/ttys | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'etc/etc.i386') diff --git a/etc/etc.i386/ttys b/etc/etc.i386/ttys index 6e165e9..e23af7c 100644 --- a/etc/etc.i386/ttys +++ b/etc/etc.i386/ttys @@ -1,33 +1,33 @@ # -# $Id: ttys,v 1.3 1999/02/09 23:55:13 wes Exp $ +# $Id: ttys,v 1.4 1999/07/04 15:06:21 des Exp $ # @(#)ttys 5.1 (Berkeley) 4/17/89 # # This file specifies various information about terminals on the system. # It is used by several different programs. Common entries for the -# various columns includes: +# various columns include: # # name The name of the terminal device. # # getty The program to start running on the terminal. Typically a # getty program, as the name implies. Other common entries -# include none, when no getty is needed, and xdm to start the +# include none, when no getty is needed, and xdm, to start the # X Window System. # # type The initial terminal type for this port. For hardwired -# terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is cons25. Other -# common values include network for network connections on -# pseudo-terminals, dialup for incoming modem ports, and unknown -# when the terminal type cannot be predetermined. +# terminal lines, this will contain the type of terminal used. +# For virtual consoles, the correct type is cons25. Other +# common values include network for network connections on +# pseudo-terminals, dialup for incoming modem ports, and unknown +# when the terminal type cannot be predetermined. # # status Must be on or off. If on, init will run the getty program on -# the specified port. If the word "secure" appears, this tty -# allows root login. +# the specified port. If the word "secure" appears, this tty +# allows root login. # # name getty type status comments # -# This entry needed for asking password when init goes to single-user mode -# If you want to be asked for password, change "secure" to "insecure" here +# If console is marked "insecure", then init will ask for the root password +# when going to single-user mode. console none unknown off secure # ttyv0 "/usr/libexec/getty Pc" cons25 on secure -- cgit v1.1