From 666aa9cc1660793c97ef29a6cb66dfbb894dde8f Mon Sep 17 00:00:00 2001 From: des Date: Tue, 22 Jul 2008 18:58:19 +0000 Subject: Revert part of 180714 - the intent was to flatten dist, not to nuke it. --- crypto/openssh/clientloop.c | 2047 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2047 insertions(+) create mode 100644 crypto/openssh/clientloop.c (limited to 'crypto/openssh/clientloop.c') diff --git a/crypto/openssh/clientloop.c b/crypto/openssh/clientloop.c new file mode 100644 index 0000000..4c51081 --- /dev/null +++ b/crypto/openssh/clientloop.c @@ -0,0 +1,2047 @@ +/* $OpenBSD: clientloop.c,v 1.176 2006/10/11 12:38:03 markus Exp $ */ +/* + * Author: Tatu Ylonen + * Copyright (c) 1995 Tatu Ylonen , Espoo, Finland + * All rights reserved + * The main loop for the interactive session (client side). + * + * As far as I am concerned, the code I have written for this software + * can be used freely for any purpose. Any derived versions of this + * software must be clearly marked as such, and if the derived work is + * incompatible with the protocol description in the RFC file, it must be + * called by a name other than "ssh" or "Secure Shell". + * + * + * Copyright (c) 1999 Theo de Raadt. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * + * SSH2 support added by Markus Friedl. + * Copyright (c) 1999, 2000, 2001 Markus Friedl. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "includes.h" + +#include +#include +#include +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef HAVE_SYS_TIME_H +# include +#endif +#include + +#include +#include +#ifdef HAVE_PATHS_H +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#include "xmalloc.h" +#include "ssh.h" +#include "ssh1.h" +#include "ssh2.h" +#include "packet.h" +#include "buffer.h" +#include "compat.h" +#include "channels.h" +#include "dispatch.h" +#include "key.h" +#include "cipher.h" +#include "kex.h" +#include "log.h" +#include "readconf.h" +#include "clientloop.h" +#include "sshconnect.h" +#include "authfd.h" +#include "atomicio.h" +#include "sshpty.h" +#include "misc.h" +#include "monitor_fdpass.h" +#include "match.h" +#include "msg.h" + +/* import options */ +extern Options options; + +/* Flag indicating that stdin should be redirected from /dev/null. */ +extern int stdin_null_flag; + +/* Flag indicating that no shell has been requested */ +extern int no_shell_flag; + +/* Control socket */ +extern int control_fd; + +/* + * Name of the host we are connecting to. This is the name given on the + * command line, or the HostName specified for the user-supplied name in a + * configuration file. + */ +extern char *host; + +/* + * Flag to indicate that we have received a window change signal which has + * not yet been processed. This will cause a message indicating the new + * window size to be sent to the server a little later. This is volatile + * because this is updated in a signal handler. + */ +static volatile sig_atomic_t received_window_change_signal = 0; +static volatile sig_atomic_t received_signal = 0; + +/* Flag indicating whether the user's terminal is in non-blocking mode. */ +static int in_non_blocking_mode = 0; + +/* Common data for the client loop code. */ +static volatile sig_atomic_t quit_pending; /* Set non-zero to quit the loop. */ +static int escape_char; /* Escape character. */ +static int escape_pending; /* Last character was the escape character */ +static int last_was_cr; /* Last character was a newline. */ +static int exit_status; /* Used to store the exit status of the command. */ +static int stdin_eof; /* EOF has been encountered on standard error. */ +static Buffer stdin_buffer; /* Buffer for stdin data. */ +static Buffer stdout_buffer; /* Buffer for stdout data. */ +static Buffer stderr_buffer; /* Buffer for stderr data. */ +static u_long stdin_bytes, stdout_bytes, stderr_bytes; +static u_int buffer_high;/* Soft max buffer size. */ +static int connection_in; /* Connection to server (input). */ +static int connection_out; /* Connection to server (output). */ +static int need_rekeying; /* Set to non-zero if rekeying is requested. */ +static int session_closed = 0; /* In SSH2: login session closed. */ +static int server_alive_timeouts = 0; + +static void client_init_dispatch(void); +int session_ident = -1; + +struct confirm_ctx { + int want_tty; + int want_subsys; + int want_x_fwd; + int want_agent_fwd; + Buffer cmd; + char *term; + struct termios tio; + char **env; +}; + +/*XXX*/ +extern Kex *xxx_kex; + +void ssh_process_session2_setup(int, int, int, Buffer *); + +/* Restores stdin to blocking mode. */ + +static void +leave_non_blocking(void) +{ + if (in_non_blocking_mode) { + unset_nonblock(fileno(stdin)); + in_non_blocking_mode = 0; + } +} + +/* Puts stdin terminal in non-blocking mode. */ + +static void +enter_non_blocking(void) +{ + in_non_blocking_mode = 1; + set_nonblock(fileno(stdin)); +} + +/* + * Signal handler for the window change signal (SIGWINCH). This just sets a + * flag indicating that the window has changed. + */ +/*ARGSUSED */ +static void +window_change_handler(int sig) +{ + received_window_change_signal = 1; + signal(SIGWINCH, window_change_handler); +} + +/* + * Signal handler for signals that cause the program to terminate. These + * signals must be trapped to restore terminal modes. + */ +/*ARGSUSED */ +static void +signal_handler(int sig) +{ + received_signal = sig; + quit_pending = 1; +} + +/* + * Returns current time in seconds from Jan 1, 1970 with the maximum + * available resolution. + */ + +static double +get_current_time(void) +{ + struct timeval tv; + gettimeofday(&tv, NULL); + return (double) tv.tv_sec + (double) tv.tv_usec / 1000000.0; +} + +#define SSH_X11_PROTO "MIT-MAGIC-COOKIE-1" +void +client_x11_get_proto(const char *display, const char *xauth_path, + u_int trusted, char **_proto, char **_data) +{ + char cmd[1024]; + char line[512]; + char xdisplay[512]; + static char proto[512], data[512]; + FILE *f; + int got_data = 0, generated = 0, do_unlink = 0, i; + char *xauthdir, *xauthfile; + struct stat st; + + xauthdir = xauthfile = NULL; + *_proto = proto; + *_data = data; + proto[0] = data[0] = '\0'; + + if (xauth_path == NULL ||(stat(xauth_path, &st) == -1)) { + debug("No xauth program."); + } else { + if (display == NULL) { + debug("x11_get_proto: DISPLAY not set"); + return; + } + /* + * Handle FamilyLocal case where $DISPLAY does + * not match an authorization entry. For this we + * just try "xauth list unix:displaynum.screennum". + * XXX: "localhost" match to determine FamilyLocal + * is not perfect. + */ + if (strncmp(display, "localhost:", 10) == 0) { + snprintf(xdisplay, sizeof(xdisplay), "unix:%s", + display + 10); + display = xdisplay; + } + if (trusted == 0) { + xauthdir = xmalloc(MAXPATHLEN); + xauthfile = xmalloc(MAXPATHLEN); + strlcpy(xauthdir, "/tmp/ssh-XXXXXXXXXX", MAXPATHLEN); + if (mkdtemp(xauthdir) != NULL) { + do_unlink = 1; + snprintf(xauthfile, MAXPATHLEN, "%s/xauthfile", + xauthdir); + snprintf(cmd, sizeof(cmd), + "%s -f %s generate %s " SSH_X11_PROTO + " untrusted timeout 1200 2>" _PATH_DEVNULL, + xauth_path, xauthfile, display); + debug2("x11_get_proto: %s", cmd); + if (system(cmd) == 0) + generated = 1; + } + } + snprintf(cmd, sizeof(cmd), + "%s %s%s list %s 2>" _PATH_DEVNULL, + xauth_path, + generated ? "-f " : "" , + generated ? xauthfile : "", + display); + debug2("x11_get_proto: %s", cmd); + f = popen(cmd, "r"); + if (f && fgets(line, sizeof(line), f) && + sscanf(line, "%*s %511s %511s", proto, data) == 2) + got_data = 1; + if (f) + pclose(f); + } + + if (do_unlink) { + unlink(xauthfile); + rmdir(xauthdir); + } + if (xauthdir) + xfree(xauthdir); + if (xauthfile) + xfree(xauthfile); + + /* + * If we didn't get authentication data, just make up some + * data. The forwarding code will check the validity of the + * response anyway, and substitute this data. The X11 + * server, however, will ignore this fake data and use + * whatever authentication mechanisms it was using otherwise + * for the local connection. + */ + if (!got_data) { + u_int32_t rnd = 0; + + logit("Warning: No xauth data; " + "using fake authentication data for X11 forwarding."); + strlcpy(proto, SSH_X11_PROTO, sizeof proto); + for (i = 0; i < 16; i++) { + if (i % 4 == 0) + rnd = arc4random(); + snprintf(data + 2 * i, sizeof data - 2 * i, "%02x", + rnd & 0xff); + rnd >>= 8; + } + } +} + +/* + * This is called when the interactive is entered. This checks if there is + * an EOF coming on stdin. We must check this explicitly, as select() does + * not appear to wake up when redirecting from /dev/null. + */ + +static void +client_check_initial_eof_on_stdin(void) +{ + int len; + char buf[1]; + + /* + * If standard input is to be "redirected from /dev/null", we simply + * mark that we have seen an EOF and send an EOF message to the + * server. Otherwise, we try to read a single character; it appears + * that for some files, such /dev/null, select() never wakes up for + * read for this descriptor, which means that we never get EOF. This + * way we will get the EOF if stdin comes from /dev/null or similar. + */ + if (stdin_null_flag) { + /* Fake EOF on stdin. */ + debug("Sending eof."); + stdin_eof = 1; + packet_start(SSH_CMSG_EOF); + packet_send(); + } else { + enter_non_blocking(); + + /* Check for immediate EOF on stdin. */ + len = read(fileno(stdin), buf, 1); + if (len == 0) { + /* EOF. Record that we have seen it and send EOF to server. */ + debug("Sending eof."); + stdin_eof = 1; + packet_start(SSH_CMSG_EOF); + packet_send(); + } else if (len > 0) { + /* + * Got data. We must store the data in the buffer, + * and also process it as an escape character if + * appropriate. + */ + if ((u_char) buf[0] == escape_char) + escape_pending = 1; + else + buffer_append(&stdin_buffer, buf, 1); + } + leave_non_blocking(); + } +} + + +/* + * Make packets from buffered stdin data, and buffer them for sending to the + * connection. + */ + +static void +client_make_packets_from_stdin_data(void) +{ + u_int len; + + /* Send buffered stdin data to the server. */ + while (buffer_len(&stdin_buffer) > 0 && + packet_not_very_much_data_to_write()) { + len = buffer_len(&stdin_buffer); + /* Keep the packets at reasonable size. */ + if (len > packet_get_maxsize()) + len = packet_get_maxsize(); + packet_start(SSH_CMSG_STDIN_DATA); + packet_put_string(buffer_ptr(&stdin_buffer), len); + packet_send(); + buffer_consume(&stdin_buffer, len); + stdin_bytes += len; + /* If we have a pending EOF, send it now. */ + if (stdin_eof && buffer_len(&stdin_buffer) == 0) { + packet_start(SSH_CMSG_EOF); + packet_send(); + } + } +} + +/* + * Checks if the client window has changed, and sends a packet about it to + * the server if so. The actual change is detected elsewhere (by a software + * interrupt on Unix); this just checks the flag and sends a message if + * appropriate. + */ + +static void +client_check_window_change(void) +{ + struct winsize ws; + + if (! received_window_change_signal) + return; + /** XXX race */ + received_window_change_signal = 0; + + debug2("client_check_window_change: changed"); + + if (compat20) { + channel_send_window_changes(); + } else { + if (ioctl(fileno(stdin), TIOCGWINSZ, &ws) < 0) + return; + packet_start(SSH_CMSG_WINDOW_SIZE); + packet_put_int((u_int)ws.ws_row); + packet_put_int((u_int)ws.ws_col); + packet_put_int((u_int)ws.ws_xpixel); + packet_put_int((u_int)ws.ws_ypixel); + packet_send(); + } +} + +static void +client_global_request_reply(int type, u_int32_t seq, void *ctxt) +{ + server_alive_timeouts = 0; + client_global_request_reply_fwd(type, seq, ctxt); +} + +static void +server_alive_check(void) +{ + if (++server_alive_timeouts > options.server_alive_count_max) { + logit("Timeout, server not responding."); + cleanup_exit(255); + } + packet_start(SSH2_MSG_GLOBAL_REQUEST); + packet_put_cstring("keepalive@openssh.com"); + packet_put_char(1); /* boolean: want reply */ + packet_send(); +} + +/* + * Waits until the client can do something (some data becomes available on + * one of the file descriptors). + */ +static void +client_wait_until_can_do_something(fd_set **readsetp, fd_set **writesetp, + int *maxfdp, u_int *nallocp, int rekeying) +{ + struct timeval tv, *tvp; + int ret; + + /* Add any selections by the channel mechanism. */ + channel_prepare_select(readsetp, writesetp, maxfdp, nallocp, rekeying); + + if (!compat20) { + /* Read from the connection, unless our buffers are full. */ + if (buffer_len(&stdout_buffer) < buffer_high && + buffer_len(&stderr_buffer) < buffer_high && + channel_not_very_much_buffered_data()) + FD_SET(connection_in, *readsetp); + /* + * Read from stdin, unless we have seen EOF or have very much + * buffered data to send to the server. + */ + if (!stdin_eof && packet_not_very_much_data_to_write()) + FD_SET(fileno(stdin), *readsetp); + + /* Select stdout/stderr if have data in buffer. */ + if (buffer_len(&stdout_buffer) > 0) + FD_SET(fileno(stdout), *writesetp); + if (buffer_len(&stderr_buffer) > 0) + FD_SET(fileno(stderr), *writesetp); + } else { + /* channel_prepare_select could have closed the last channel */ + if (session_closed && !channel_still_open() && + !packet_have_data_to_write()) { + /* clear mask since we did not call select() */ + memset(*readsetp, 0, *nallocp); + memset(*writesetp, 0, *nallocp); + return; + } else { + FD_SET(connection_in, *readsetp); + } + } + + /* Select server connection if have data to write to the server. */ + if (packet_have_data_to_write()) + FD_SET(connection_out, *writesetp); + + if (control_fd != -1) + FD_SET(control_fd, *readsetp); + + /* + * Wait for something to happen. This will suspend the process until + * some selected descriptor can be read, written, or has some other + * event pending. + */ + + if (options.server_alive_interval == 0 || !compat20) + tvp = NULL; + else { + tv.tv_sec = options.server_alive_interval; + tv.tv_usec = 0; + tvp = &tv; + } + ret = select((*maxfdp)+1, *readsetp, *writesetp, NULL, tvp); + if (ret < 0) { + char buf[100]; + + /* + * We have to clear the select masks, because we return. + * We have to return, because the mainloop checks for the flags + * set by the signal handlers. + */ + memset(*readsetp, 0, *nallocp); + memset(*writesetp, 0, *nallocp); + + if (errno == EINTR) + return; + /* Note: we might still have data in the buffers. */ + snprintf(buf, sizeof buf, "select: %s\r\n", strerror(errno)); + buffer_append(&stderr_buffer, buf, strlen(buf)); + quit_pending = 1; + } else if (ret == 0) + server_alive_check(); +} + +static void +client_suspend_self(Buffer *bin, Buffer *bout, Buffer *berr) +{ + /* Flush stdout and stderr buffers. */ + if (buffer_len(bout) > 0) + atomicio(vwrite, fileno(stdout), buffer_ptr(bout), buffer_len(bout)); + if (buffer_len(berr) > 0) + atomicio(vwrite, fileno(stderr), buffer_ptr(berr), buffer_len(berr)); + + leave_raw_mode(); + + /* + * Free (and clear) the buffer to reduce the amount of data that gets + * written to swap. + */ + buffer_free(bin); + buffer_free(bout); + buffer_free(berr); + + /* Send the suspend signal to the program itself. */ + kill(getpid(), SIGTSTP); + + /* Reset window sizes in case they have changed */ + received_window_change_signal = 1; + + /* OK, we have been continued by the user. Reinitialize buffers. */ + buffer_init(bin); + buffer_init(bout); + buffer_init(berr); + + enter_raw_mode(); +} + +static void +client_process_net_input(fd_set *readset) +{ + int len; + char buf[8192]; + + /* + * Read input from the server, and add any such data to the buffer of + * the packet subsystem. + */ + if (FD_ISSET(connection_in, readset)) { + /* Read as much as possible. */ + len = read(connection_in, buf, sizeof(buf)); + if (len == 0) { + /* Received EOF. The remote host has closed the connection. */ + snprintf(buf, sizeof buf, "Connection to %.300s closed by remote host.\r\n", + host); + buffer_append(&stderr_buffer, buf, strlen(buf)); + quit_pending = 1; + return; + } + /* + * There is a kernel bug on Solaris that causes select to + * sometimes wake up even though there is no data available. + */ + if (len < 0 && (errno == EAGAIN || errno == EINTR)) + len = 0; + + if (len < 0) { + /* An error has encountered. Perhaps there is a network problem. */ + snprintf(buf, sizeof buf, "Read from remote host %.300s: %.100s\r\n", + host, strerror(errno)); + buffer_append(&stderr_buffer, buf, strlen(buf)); + quit_pending = 1; + return; + } + packet_process_incoming(buf, len); + } +} + +static void +client_subsystem_reply(int type, u_int32_t seq, void *ctxt) +{ + int id; + Channel *c; + + id = packet_get_int(); + packet_check_eom(); + + if ((c = channel_lookup(id)) == NULL) { + error("%s: no channel for id %d", __func__, id); + return; + } + + if (type == SSH2_MSG_CHANNEL_SUCCESS) + debug2("Request suceeded on channel %d", id); + else if (type == SSH2_MSG_CHANNEL_FAILURE) { + error("Request failed on channel %d", id); + channel_free(c); + } +} + +static void +client_extra_session2_setup(int id, void *arg) +{ + struct confirm_ctx *cctx = arg; + const char *display; + Channel *c; + int i; + + if (cctx == NULL) + fatal("%s: cctx == NULL", __func__); + if ((c = channel_lookup(id)) == NULL) + fatal("%s: no channel for id %d", __func__, id); + + display = getenv("DISPLAY"); + if (cctx->want_x_fwd && options.forward_x11 && display != NULL) { + char *proto, *data; + /* Get reasonable local authentication information. */ + client_x11_get_proto(display, options.xauth_location, + options.forward_x11_trusted, &proto, &data); + /* Request forwarding with authentication spoofing. */ + debug("Requesting X11 forwarding with authentication spoofing."); + x11_request_forwarding_with_spoofing(id, display, proto, data); + /* XXX wait for reply */ + } + + if (cctx->want_agent_fwd && options.forward_agent) { + debug("Requesting authentication agent forwarding."); + channel_request_start(id, "auth-agent-req@openssh.com", 0); + packet_send(); + } + + client_session2_setup(id, cctx->want_tty, cctx->want_subsys, + cctx->term, &cctx->tio, c->rfd, &cctx->cmd, cctx->env, + client_subsystem_reply); + + c->confirm_ctx = NULL; + buffer_free(&cctx->cmd); + xfree(cctx->term); + if (cctx->env != NULL) { + for (i = 0; cctx->env[i] != NULL; i++) + xfree(cctx->env[i]); + xfree(cctx->env); + } + xfree(cctx); +} + +static void +client_process_control(fd_set *readset) +{ + Buffer m; + Channel *c; + int client_fd, new_fd[3], ver, allowed; + socklen_t addrlen; + struct sockaddr_storage addr; + struct confirm_ctx *cctx; + char *cmd; + u_int i, len, env_len, command, flags; + uid_t euid; + gid_t egid; + + /* + * Accept connection on control socket + */ + if (control_fd == -1 || !FD_ISSET(control_fd, readset)) + return; + + memset(&addr, 0, sizeof(addr)); + addrlen = sizeof(addr); + if ((client_fd = accept(control_fd, + (struct sockaddr*)&addr, &addrlen)) == -1) { + error("%s accept: %s", __func__, strerror(errno)); + return; + } + + if (getpeereid(client_fd, &euid, &egid) < 0) { + error("%s getpeereid failed: %s", __func__, strerror(errno)); + close(client_fd); + return; + } + if ((euid != 0) && (getuid() != euid)) { + error("control mode uid mismatch: peer euid %u != uid %u", + (u_int) euid, (u_int) getuid()); + close(client_fd); + return; + } + + unset_nonblock(client_fd); + + /* Read command */ + buffer_init(&m); + if (ssh_msg_recv(client_fd, &m) == -1) { + error("%s: client msg_recv failed", __func__); + close(client_fd); + buffer_free(&m); + return; + } + if ((ver = buffer_get_char(&m)) != SSHMUX_VER) { + error("%s: wrong client version %d", __func__, ver); + buffer_free(&m); + close(client_fd); + return; + } + + allowed = 1; + command = buffer_get_int(&m); + flags = buffer_get_int(&m); + + buffer_clear(&m); + + switch (command) { + case SSHMUX_COMMAND_OPEN: + if (options.control_master == SSHCTL_MASTER_ASK || + options.control_master == SSHCTL_MASTER_AUTO_ASK) + allowed = ask_permission("Allow shared connection " + "to %s? ", host); + /* continue below */ + break; + case SSHMUX_COMMAND_TERMINATE: + if (options.control_master == SSHCTL_MASTER_ASK || + options.control_master == SSHCTL_MASTER_AUTO_ASK) + allowed = ask_permission("Terminate shared connection " + "to %s? ", host); + if (allowed) + quit_pending = 1; + /* FALLTHROUGH */ + case SSHMUX_COMMAND_ALIVE_CHECK: + /* Reply for SSHMUX_COMMAND_TERMINATE and ALIVE_CHECK */ + buffer_clear(&m); + buffer_put_int(&m, allowed); + buffer_put_int(&m, getpid()); + if (ssh_msg_send(client_fd, SSHMUX_VER, &m) == -1) { + error("%s: client msg_send failed", __func__); + close(client_fd); + buffer_free(&m); + return; + } + buffer_free(&m); + close(client_fd); + return; + default: + error("Unsupported command %d", command); + buffer_free(&m); + close(client_fd); + return; + } + + /* Reply for SSHMUX_COMMAND_OPEN */ + buffer_clear(&m); + buffer_put_int(&m, allowed); + buffer_put_int(&m, getpid()); + if (ssh_msg_send(client_fd, SSHMUX_VER, &m) == -1) { + error("%s: client msg_send failed", __func__); + close(client_fd); + buffer_free(&m); + return; + } + + if (!allowed) { + error("Refused control connection"); + close(client_fd); + buffer_free(&m); + return; + } + + buffer_clear(&m); + if (ssh_msg_recv(client_fd, &m) == -1) { + error("%s: client msg_recv failed", __func__); + close(client_fd); + buffer_free(&m); + return; + } + if ((ver = buffer_get_char(&m)) != SSHMUX_VER) { + error("%s: wrong client version %d", __func__, ver); + buffer_free(&m); + close(client_fd); + return; + } + + cctx = xcalloc(1, sizeof(*cctx)); + cctx->want_tty = (flags & SSHMUX_FLAG_TTY) != 0; + cctx->want_subsys = (flags & SSHMUX_FLAG_SUBSYS) != 0; + cctx->want_x_fwd = (flags & SSHMUX_FLAG_X11_FWD) != 0; + cctx->want_agent_fwd = (flags & SSHMUX_FLAG_AGENT_FWD) != 0; + cctx->term = buffer_get_string(&m, &len); + + cmd = buffer_get_string(&m, &len); + buffer_init(&cctx->cmd); + buffer_append(&cctx->cmd, cmd, strlen(cmd)); + + env_len = buffer_get_int(&m); + env_len = MIN(env_len, 4096); + debug3("%s: receiving %d env vars", __func__, env_len); + if (env_len != 0) { + cctx->env = xcalloc(env_len + 1, sizeof(*cctx->env)); + for (i = 0; i < env_len; i++) + cctx->env[i] = buffer_get_string(&m, &len); + cctx->env[i] = NULL; + } + + debug2("%s: accepted tty %d, subsys %d, cmd %s", __func__, + cctx->want_tty, cctx->want_subsys, cmd); + xfree(cmd); + + /* Gather fds from client */ + new_fd[0] = mm_receive_fd(client_fd); + new_fd[1] = mm_receive_fd(client_fd); + new_fd[2] = mm_receive_fd(client_fd); + + debug2("%s: got fds stdin %d, stdout %d, stderr %d", __func__, + new_fd[0], new_fd[1], new_fd[2]); + + /* Try to pick up ttymodes from client before it goes raw */ + if (cctx->want_tty && tcgetattr(new_fd[0], &cctx->tio) == -1) + error("%s: tcgetattr: %s", __func__, strerror(errno)); + + /* This roundtrip is just for synchronisation of ttymodes */ + buffer_clear(&m); + if (ssh_msg_send(client_fd, SSHMUX_VER, &m) == -1) { + error("%s: client msg_send failed", __func__); + close(client_fd); + close(new_fd[0]); + close(new_fd[1]); + close(new_fd[2]); + buffer_free(&m); + xfree(cctx->term); + if (env_len != 0) { + for (i = 0; i < env_len; i++) + xfree(cctx->env[i]); + xfree(cctx->env); + } + return; + } + buffer_free(&m); + + /* enable nonblocking unless tty */ + if (!isatty(new_fd[0])) + set_nonblock(new_fd[0]); + if (!isatty(new_fd[1])) + set_nonblock(new_fd[1]); + if (!isatty(new_fd[2])) + set_nonblock(new_fd[2]); + + set_nonblock(client_fd); + + c = channel_new("session", SSH_CHANNEL_OPENING, + new_fd[0], new_fd[1], new_fd[2], + CHAN_SES_WINDOW_DEFAULT, CHAN_SES_PACKET_DEFAULT, + CHAN_EXTENDED_WRITE, "client-session", /*nonblock*/0); + + /* XXX */ + c->ctl_fd = client_fd; + + debug3("%s: channel_new: %d", __func__, c->self); + + channel_send_open(c->self); + channel_register_confirm(c->self, client_extra_session2_setup, cctx); +} + +static void +process_cmdline(void) +{ + void (*handler)(int); + char *s, *cmd, *cancel_host; + int delete = 0; + int local = 0; + u_short cancel_port; + Forward fwd; + + leave_raw_mode(); + handler = signal(SIGINT, SIG_IGN); + cmd = s = read_passphrase("\r\nssh> ", RP_ECHO); + if (s == NULL) + goto out; + while (*s && isspace(*s)) + s++; + if (*s == '-') + s++; /* Skip cmdline '-', if any */ + if (*s == '\0') + goto out; + + if (*s == 'h' || *s == 'H' || *s == '?') { + logit("Commands:"); + logit(" -L[bind_address:]port:host:hostport " + "Request local forward"); + logit(" -R[bind_address:]port:host:hostport " + "Request remote forward"); + logit(" -KR[bind_address:]port " + "Cancel remote forward"); + if (!options.permit_local_command) + goto out; + logit(" !args " + "Execute local command"); + goto out; + } + + if (*s == '!' && options.permit_local_command) { + s++; + ssh_local_cmd(s); + goto out; + } + + if (*s == 'K') { + delete = 1; + s++; + } + if (*s != 'L' && *s != 'R') { + logit("Invalid command."); + goto out; + } + if (*s == 'L') + local = 1; + if (local && delete) { + logit("Not supported."); + goto out; + } + if ((!local || delete) && !compat20) { + logit("Not supported for SSH protocol version 1."); + goto out; + } + + s++; + while (*s && isspace(*s)) + s++; + + if (delete) { + cancel_port = 0; + cancel_host = hpdelim(&s); /* may be NULL */ + if (s != NULL) { + cancel_port = a2port(s); + cancel_host = cleanhostname(cancel_host); + } else { + cancel_port = a2port(cancel_host); + cancel_host = NULL; + } + if (cancel_port == 0) { + logit("Bad forwarding close port"); + goto out; + } + channel_request_rforward_cancel(cancel_host, cancel_port); + } else { + if (!parse_forward(&fwd, s)) { + logit("Bad forwarding specification."); + goto out; + } + if (local) { + if (channel_setup_local_fwd_listener(fwd.listen_host, + fwd.listen_port, fwd.connect_host, + fwd.connect_port, options.gateway_ports) < 0) { + logit("Port forwarding failed."); + goto out; + } + } else { + if (channel_request_remote_forwarding(fwd.listen_host, + fwd.listen_port, fwd.connect_host, + fwd.connect_port) < 0) { + logit("Port forwarding failed."); + goto out; + } + } + + logit("Forwarding port."); + } + +out: + signal(SIGINT, handler); + enter_raw_mode(); + if (cmd) + xfree(cmd); +} + +/* process the characters one by one */ +static int +process_escapes(Buffer *bin, Buffer *bout, Buffer *berr, char *buf, int len) +{ + char string[1024]; + pid_t pid; + int bytes = 0; + u_int i; + u_char ch; + char *s; + + if (len <= 0) + return (0); + + for (i = 0; i < (u_int)len; i++) { + /* Get one character at a time. */ + ch = buf[i]; + + if (escape_pending) { + /* We have previously seen an escape character. */ + /* Clear the flag now. */ + escape_pending = 0; + + /* Process the escaped character. */ + switch (ch) { + case '.': + /* Terminate the connection. */ + snprintf(string, sizeof string, "%c.\r\n", escape_char); + buffer_append(berr, string, strlen(string)); + + quit_pending = 1; + return -1; + + case 'Z' - 64: + /* Suspend the program. */ + /* Print a message to that effect to the user. */ + snprintf(string, sizeof string, "%c^Z [suspend ssh]\r\n", escape_char); + buffer_append(berr, string, strlen(string)); + + /* Restore terminal modes and suspend. */ + client_suspend_self(bin, bout, berr); + + /* We have been continued. */ + continue; + + case 'B': + if (compat20) { + snprintf(string, sizeof string, + "%cB\r\n", escape_char); + buffer_append(berr, string, + strlen(string)); + channel_request_start(session_ident, + "break", 0); + packet_put_int(1000); + packet_send(); + } + continue; + + case 'R': + if (compat20) { + if (datafellows & SSH_BUG_NOREKEY) + logit("Server does not support re-keying"); + else + need_rekeying = 1; + } + continue; + + case '&': + /* + * Detach the program (continue to serve connections, + * but put in background and no more new connections). + */ + /* Restore tty modes. */ + leave_raw_mode(); + + /* Stop listening for new connections. */ + channel_stop_listening(); + + snprintf(string, sizeof string, + "%c& [backgrounded]\n", escape_char); + buffer_append(berr, string, strlen(string)); + + /* Fork into background. */ + pid = fork(); + if (pid < 0) { + error("fork: %.100s", strerror(errno)); + continue; + } + if (pid != 0) { /* This is the parent. */ + /* The parent just exits. */ + exit(0); + } + /* The child continues serving connections. */ + if (compat20) { + buffer_append(bin, "\004", 1); + /* fake EOF on stdin */ + return -1; + } else if (!stdin_eof) { + /* + * Sending SSH_CMSG_EOF alone does not always appear + * to be enough. So we try to send an EOF character + * first. + */ + packet_start(SSH_CMSG_STDIN_DATA); + packet_put_string("\004", 1); + packet_send(); + /* Close stdin. */ + stdin_eof = 1; + if (buffer_len(bin) == 0) { + packet_start(SSH_CMSG_EOF); + packet_send(); + } + } + continue; + + case '?': + snprintf(string, sizeof string, +"%c?\r\n\ +Supported escape sequences:\r\n\ +%c. - terminate connection\r\n\ +%cB - send a BREAK to the remote system\r\n\ +%cC - open a command line\r\n\ +%cR - Request rekey (SSH protocol 2 only)\r\n\ +%c^Z - suspend ssh\r\n\ +%c# - list forwarded connections\r\n\ +%c& - background ssh (when waiting for connections to terminate)\r\n\ +%c? - this message\r\n\ +%c%c - send the escape character by typing it twice\r\n\ +(Note that escapes are only recognized immediately after newline.)\r\n", + escape_char, escape_char, escape_char, escape_char, + escape_char, escape_char, escape_char, escape_char, + escape_char, escape_char, escape_char); + buffer_append(berr, string, strlen(string)); + continue; + + case '#': + snprintf(string, sizeof string, "%c#\r\n", escape_char); + buffer_append(berr, string, strlen(string)); + s = channel_open_message(); + buffer_append(berr, s, strlen(s)); + xfree(s); + continue; + + case 'C': + process_cmdline(); + continue; + + default: + if (ch != escape_char) { + buffer_put_char(bin, escape_char); + bytes++; + } + /* Escaped characters fall through here */ + break; + } + } else { + /* + * The previous character was not an escape char. Check if this + * is an escape. + */ + if (last_was_cr && ch == escape_char) { + /* It is. Set the flag and continue to next character. */ + escape_pending = 1; + continue; + } + } + + /* + * Normal character. Record whether it was a newline, + * and append it to the buffer. + */ + last_was_cr = (ch == '\r' || ch == '\n'); + buffer_put_char(bin, ch); + bytes++; + } + return bytes; +} + +static void +client_process_input(fd_set *readset) +{ + int len; + char buf[8192]; + + /* Read input from stdin. */ + if (FD_ISSET(fileno(stdin), readset)) { + /* Read as much as possible. */ + len = read(fileno(stdin), buf, sizeof(buf)); + if (len < 0 && (errno == EAGAIN || errno == EINTR)) + return; /* we'll try again later */ + if (len <= 0) { + /* + * Received EOF or error. They are treated + * similarly, except that an error message is printed + * if it was an error condition. + */ + if (len < 0) { + snprintf(buf, sizeof buf, "read: %.100s\r\n", strerror(errno)); + buffer_append(&stderr_buffer, buf, strlen(buf)); + } + /* Mark that we have seen EOF. */ + stdin_eof = 1; + /* + * Send an EOF message to the server unless there is + * data in the buffer. If there is data in the + * buffer, no message will be sent now. Code + * elsewhere will send the EOF when the buffer + * becomes empty if stdin_eof is set. + */ + if (buffer_len(&stdin_buffer) == 0) { + packet_start(SSH_CMSG_EOF); + packet_send(); + } + } else if (escape_char == SSH_ESCAPECHAR_NONE) { + /* + * Normal successful read, and no escape character. + * Just append the data to buffer. + */ + buffer_append(&stdin_buffer, buf, len); + } else { + /* + * Normal, successful read. But we have an escape character + * and have to process the characters one by one. + */ + if (process_escapes(&stdin_buffer, &stdout_buffer, + &stderr_buffer, buf, len) == -1) + return; + } + } +} + +static void +client_process_output(fd_set *writeset) +{ + int len; + char buf[100]; + + /* Write buffered output to stdout. */ + if (FD_ISSET(fileno(stdout), writeset)) { + /* Write as much data as possible. */ + len = write(fileno(stdout), buffer_ptr(&stdout_buffer), + buffer_len(&stdout_buffer)); + if (len <= 0) { + if (errno == EINTR || errno == EAGAIN) + len = 0; + else { + /* + * An error or EOF was encountered. Put an + * error message to stderr buffer. + */ + snprintf(buf, sizeof buf, "write stdout: %.50s\r\n", strerror(errno)); + buffer_append(&stderr_buffer, buf, strlen(buf)); + quit_pending = 1; + return; + } + } + /* Consume printed data from the buffer. */ + buffer_consume(&stdout_buffer, len); + stdout_bytes += len; + } + /* Write buffered output to stderr. */ + if (FD_ISSET(fileno(stderr), writeset)) { + /* Write as much data as possible. */ + len = write(fileno(stderr), buffer_ptr(&stderr_buffer), + buffer_len(&stderr_buffer)); + if (len <= 0) { + if (errno == EINTR || errno == EAGAIN) + len = 0; + else { + /* EOF or error, but can't even print error message. */ + quit_pending = 1; + return; + } + } + /* Consume printed characters from the buffer. */ + buffer_consume(&stderr_buffer, len); + stderr_bytes += len; + } +} + +/* + * Get packets from the connection input buffer, and process them as long as + * there are packets available. + * + * Any unknown packets received during the actual + * session cause the session to terminate. This is + * intended to make debugging easier since no + * confirmations are sent. Any compatible protocol + * extensions must be negotiated during the + * preparatory phase. + */ + +static void +client_process_buffered_input_packets(void) +{ + dispatch_run(DISPATCH_NONBLOCK, &quit_pending, compat20 ? xxx_kex : NULL); +} + +/* scan buf[] for '~' before sending data to the peer */ + +static int +simple_escape_filter(Channel *c, char *buf, int len) +{ + /* XXX we assume c->extended is writeable */ + return process_escapes(&c->input, &c->output, &c->extended, buf, len); +} + +static void +client_channel_closed(int id, void *arg) +{ + channel_cancel_cleanup(id); + session_closed = 1; + leave_raw_mode(); +} + +/* + * Implements the interactive session with the server. This is called after + * the user has been authenticated, and a command has been started on the + * remote host. If escape_char != SSH_ESCAPECHAR_NONE, it is the character + * used as an escape character for terminating or suspending the session. + */ + +int +client_loop(int have_pty, int escape_char_arg, int ssh2_chan_id) +{ + fd_set *readset = NULL, *writeset = NULL; + double start_time, total_time; + int max_fd = 0, max_fd2 = 0, len, rekeying = 0; + u_int nalloc = 0; + char buf[100]; + + debug("Entering interactive session."); + + start_time = get_current_time(); + + /* Initialize variables. */ + escape_pending = 0; + last_was_cr = 1; + exit_status = -1; + stdin_eof = 0; + buffer_high = 64 * 1024; + connection_in = packet_get_connection_in(); + connection_out = packet_get_connection_out(); + max_fd = MAX(connection_in, connection_out); + if (control_fd != -1) + max_fd = MAX(max_fd, control_fd); + + if (!compat20) { + /* enable nonblocking unless tty */ + if (!isatty(fileno(stdin))) + set_nonblock(fileno(stdin)); + if (!isatty(fileno(stdout))) + set_nonblock(fileno(stdout)); + if (!isatty(fileno(stderr))) + set_nonblock(fileno(stderr)); + max_fd = MAX(max_fd, fileno(stdin)); + max_fd = MAX(max_fd, fileno(stdout)); + max_fd = MAX(max_fd, fileno(stderr)); + } + stdin_bytes = 0; + stdout_bytes = 0; + stderr_bytes = 0; + quit_pending = 0; + escape_char = escape_char_arg; + + /* Initialize buffers. */ + buffer_init(&stdin_buffer); + buffer_init(&stdout_buffer); + buffer_init(&stderr_buffer); + + client_init_dispatch(); + + /* + * Set signal handlers, (e.g. to restore non-blocking mode) + * but don't overwrite SIG_IGN, matches behaviour from rsh(1) + */ + if (signal(SIGHUP, SIG_IGN) != SIG_IGN) + signal(SIGHUP, signal_handler); + if (signal(SIGINT, SIG_IGN) != SIG_IGN) + signal(SIGINT, signal_handler); + if (signal(SIGQUIT, SIG_IGN) != SIG_IGN) + signal(SIGQUIT, signal_handler); + if (signal(SIGTERM, SIG_IGN) != SIG_IGN) + signal(SIGTERM, signal_handler); + signal(SIGWINCH, window_change_handler); + + if (have_pty) + enter_raw_mode(); + + if (compat20) { + session_ident = ssh2_chan_id; + if (escape_char != SSH_ESCAPECHAR_NONE) + channel_register_filter(session_ident, + simple_escape_filter, NULL); + if (session_ident != -1) + channel_register_cleanup(session_ident, + client_channel_closed, 0); + } else { + /* Check if we should immediately send eof on stdin. */ + client_check_initial_eof_on_stdin(); + } + + /* Main loop of the client for the interactive session mode. */ + while (!quit_pending) { + + /* Process buffered packets sent by the server. */ + client_process_buffered_input_packets(); + + if (compat20 && session_closed && !channel_still_open()) + break; + + rekeying = (xxx_kex != NULL && !xxx_kex->done); + + if (rekeying) { + debug("rekeying in progress"); + } else { + /* + * Make packets of buffered stdin data, and buffer + * them for sending to the server. + */ + if (!compat20) + client_make_packets_from_stdin_data(); + + /* + * Make packets from buffered channel data, and + * enqueue them for sending to the server. + */ + if (packet_not_very_much_data_to_write()) + channel_output_poll(); + + /* + * Check if the window size has changed, and buffer a + * message about it to the server if so. + */ + client_check_window_change(); + + if (quit_pending) + break; + } + /* + * Wait until we have something to do (something becomes + * available on one of the descriptors). + */ + max_fd2 = max_fd; + client_wait_until_can_do_something(&readset, &writeset, + &max_fd2, &nalloc, rekeying); + + if (quit_pending) + break; + + /* Do channel operations unless rekeying in progress. */ + if (!rekeying) { + channel_after_select(readset, writeset); + if (need_rekeying || packet_need_rekeying()) { + debug("need rekeying"); + xxx_kex->done = 0; + kex_send_kexinit(xxx_kex); + need_rekeying = 0; + } + } + + /* Buffer input from the connection. */ + client_process_net_input(readset); + + /* Accept control connections. */ + client_process_control(readset); + + if (quit_pending) + break; + + if (!compat20) { + /* Buffer data from stdin */ + client_process_input(readset); + /* + * Process output to stdout and stderr. Output to + * the connection is processed elsewhere (above). + */ + client_process_output(writeset); + } + + /* Send as much buffered packet data as possible to the sender. */ + if (FD_ISSET(connection_out, writeset)) + packet_write_poll(); + } + if (readset) + xfree(readset); + if (writeset) + xfree(writeset); + + /* Terminate the session. */ + + /* Stop watching for window change. */ + signal(SIGWINCH, SIG_DFL); + + channel_free_all(); + + if (have_pty) + leave_raw_mode(); + + /* restore blocking io */ + if (!isatty(fileno(stdin))) + unset_nonblock(fileno(stdin)); + if (!isatty(fileno(stdout))) + unset_nonblock(fileno(stdout)); + if (!isatty(fileno(stderr))) + unset_nonblock(fileno(stderr)); + + /* + * If there was no shell or command requested, there will be no remote + * exit status to be returned. In that case, clear error code if the + * connection was deliberately terminated at this end. + */ + if (no_shell_flag && received_signal == SIGTERM) { + received_signal = 0; + exit_status = 0; + } + + if (received_signal) + fatal("Killed by signal %d.", (int) received_signal); + + /* + * In interactive mode (with pseudo tty) display a message indicating + * that the connection has been closed. + */ + if (have_pty && options.log_level != SYSLOG_LEVEL_QUIET) { + snprintf(buf, sizeof buf, "Connection to %.64s closed.\r\n", host); + buffer_append(&stderr_buffer, buf, strlen(buf)); + } + + /* Output any buffered data for stdout. */ + while (buffer_len(&stdout_buffer) > 0) { + len = write(fileno(stdout), buffer_ptr(&stdout_buffer), + buffer_len(&stdout_buffer)); + if (len <= 0) { + error("Write failed flushing stdout buffer."); + break; + } + buffer_consume(&stdout_buffer, len); + stdout_bytes += len; + } + + /* Output any buffered data for stderr. */ + while (buffer_len(&stderr_buffer) > 0) { + len = write(fileno(stderr), buffer_ptr(&stderr_buffer), + buffer_len(&stderr_buffer)); + if (len <= 0) { + error("Write failed flushing stderr buffer."); + break; + } + buffer_consume(&stderr_buffer, len); + stderr_bytes += len; + } + + /* Clear and free any buffers. */ + memset(buf, 0, sizeof(buf)); + buffer_free(&stdin_buffer); + buffer_free(&stdout_buffer); + buffer_free(&stderr_buffer); + + /* Report bytes transferred, and transfer rates. */ + total_time = get_current_time() - start_time; + debug("Transferred: stdin %lu, stdout %lu, stderr %lu bytes in %.1f seconds", + stdin_bytes, stdout_bytes, stderr_bytes, total_time); + if (total_time > 0) + debug("Bytes per second: stdin %.1f, stdout %.1f, stderr %.1f", + stdin_bytes / total_time, stdout_bytes / total_time, + stderr_bytes / total_time); + + /* Return the exit status of the program. */ + debug("Exit status %d", exit_status); + return exit_status; +} + +/*********/ + +static void +client_input_stdout_data(int type, u_int32_t seq, void *ctxt) +{ + u_int data_len; + char *data = packet_get_string(&data_len); + packet_check_eom(); + buffer_append(&stdout_buffer, data, data_len); + memset(data, 0, data_len); + xfree(data); +} +static void +client_input_stderr_data(int type, u_int32_t seq, void *ctxt) +{ + u_int data_len; + char *data = packet_get_string(&data_len); + packet_check_eom(); + buffer_append(&stderr_buffer, data, data_len); + memset(data, 0, data_len); + xfree(data); +} +static void +client_input_exit_status(int type, u_int32_t seq, void *ctxt) +{ + exit_status = packet_get_int(); + packet_check_eom(); + /* Acknowledge the exit. */ + packet_start(SSH_CMSG_EXIT_CONFIRMATION); + packet_send(); + /* + * Must wait for packet to be sent since we are + * exiting the loop. + */ + packet_write_wait(); + /* Flag that we want to exit. */ + quit_pending = 1; +} +static void +client_input_agent_open(int type, u_int32_t seq, void *ctxt) +{ + Channel *c = NULL; + int remote_id, sock; + + /* Read the remote channel number from the message. */ + remote_id = packet_get_int(); + packet_check_eom(); + + /* + * Get a connection to the local authentication agent (this may again + * get forwarded). + */ + sock = ssh_get_authentication_socket(); + + /* + * If we could not connect the agent, send an error message back to + * the server. This should never happen unless the agent dies, + * because authentication forwarding is only enabled if we have an + * agent. + */ + if (sock >= 0) { + c = channel_new("", SSH_CHANNEL_OPEN, sock, sock, + -1, 0, 0, 0, "authentication agent connection", 1); + c->remote_id = remote_id; + c->force_drain = 1; + } + if (c == NULL) { + packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); + packet_put_int(remote_id); + } else { + /* Send a confirmation to the remote host. */ + debug("Forwarding authentication connection."); + packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); + packet_put_int(remote_id); + packet_put_int(c->self); + } + packet_send(); +} + +static Channel * +client_request_forwarded_tcpip(const char *request_type, int rchan) +{ + Channel *c = NULL; + char *listen_address, *originator_address; + int listen_port, originator_port; + int sock; + + /* Get rest of the packet */ + listen_address = packet_get_string(NULL); + listen_port = packet_get_int(); + originator_address = packet_get_string(NULL); + originator_port = packet_get_int(); + packet_check_eom(); + + debug("client_request_forwarded_tcpip: listen %s port %d, originator %s port %d", + listen_address, listen_port, originator_address, originator_port); + + sock = channel_connect_by_listen_address(listen_port); + if (sock < 0) { + xfree(originator_address); + xfree(listen_address); + return NULL; + } + c = channel_new("forwarded-tcpip", + SSH_CHANNEL_CONNECTING, sock, sock, -1, + CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_WINDOW_DEFAULT, 0, + originator_address, 1); + xfree(originator_address); + xfree(listen_address); + return c; +} + +static Channel * +client_request_x11(const char *request_type, int rchan) +{ + Channel *c = NULL; + char *originator; + int originator_port; + int sock; + + if (!options.forward_x11) { + error("Warning: ssh server tried X11 forwarding."); + error("Warning: this is probably a break-in attempt by a malicious server."); + return NULL; + } + originator = packet_get_string(NULL); + if (datafellows & SSH_BUG_X11FWD) { + debug2("buggy server: x11 request w/o originator_port"); + originator_port = 0; + } else { + originator_port = packet_get_int(); + } + packet_check_eom(); + /* XXX check permission */ + debug("client_request_x11: request from %s %d", originator, + originator_port); + xfree(originator); + sock = x11_connect_display(); + if (sock < 0) + return NULL; + c = channel_new("x11", + SSH_CHANNEL_X11_OPEN, sock, sock, -1, + CHAN_TCP_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 0, "x11", 1); + c->force_drain = 1; + return c; +} + +static Channel * +client_request_agent(const char *request_type, int rchan) +{ + Channel *c = NULL; + int sock; + + if (!options.forward_agent) { + error("Warning: ssh server tried agent forwarding."); + error("Warning: this is probably a break-in attempt by a malicious server."); + return NULL; + } + sock = ssh_get_authentication_socket(); + if (sock < 0) + return NULL; + c = channel_new("authentication agent connection", + SSH_CHANNEL_OPEN, sock, sock, -1, + CHAN_X11_WINDOW_DEFAULT, CHAN_TCP_WINDOW_DEFAULT, 0, + "authentication agent connection", 1); + c->force_drain = 1; + return c; +} + +/* XXXX move to generic input handler */ +static void +client_input_channel_open(int type, u_int32_t seq, void *ctxt) +{ + Channel *c = NULL; + char *ctype; + int rchan; + u_int rmaxpack, rwindow, len; + + ctype = packet_get_string(&len); + rchan = packet_get_int(); + rwindow = packet_get_int(); + rmaxpack = packet_get_int(); + + debug("client_input_channel_open: ctype %s rchan %d win %d max %d", + ctype, rchan, rwindow, rmaxpack); + + if (strcmp(ctype, "forwarded-tcpip") == 0) { + c = client_request_forwarded_tcpip(ctype, rchan); + } else if (strcmp(ctype, "x11") == 0) { + c = client_request_x11(ctype, rchan); + } else if (strcmp(ctype, "auth-agent@openssh.com") == 0) { + c = client_request_agent(ctype, rchan); + } +/* XXX duplicate : */ + if (c != NULL) { + debug("confirm %s", ctype); + c->remote_id = rchan; + c->remote_window = rwindow; + c->remote_maxpacket = rmaxpack; + if (c->type != SSH_CHANNEL_CONNECTING) { + packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION); + packet_put_int(c->remote_id); + packet_put_int(c->self); + packet_put_int(c->local_window); + packet_put_int(c->local_maxpacket); + packet_send(); + } + } else { + debug("failure %s", ctype); + packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE); + packet_put_int(rchan); + packet_put_int(SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED); + if (!(datafellows & SSH_BUG_OPENFAILURE)) { + packet_put_cstring("open failed"); + packet_put_cstring(""); + } + packet_send(); + } + xfree(ctype); +} +static void +client_input_channel_req(int type, u_int32_t seq, void *ctxt) +{ + Channel *c = NULL; + int exitval, id, reply, success = 0; + char *rtype; + + id = packet_get_int(); + rtype = packet_get_string(NULL); + reply = packet_get_char(); + + debug("client_input_channel_req: channel %d rtype %s reply %d", + id, rtype, reply); + + if (id == -1) { + error("client_input_channel_req: request for channel -1"); + } else if ((c = channel_lookup(id)) == NULL) { + error("client_input_channel_req: channel %d: unknown channel", id); + } else if (strcmp(rtype, "exit-status") == 0) { + exitval = packet_get_int(); + if (id == session_ident) { + success = 1; + exit_status = exitval; + } else if (c->ctl_fd == -1) { + error("client_input_channel_req: unexpected channel %d", + session_ident); + } else { + atomicio(vwrite, c->ctl_fd, &exitval, sizeof(exitval)); + success = 1; + } + packet_check_eom(); + } + if (reply) { + packet_start(success ? + SSH2_MSG_CHANNEL_SUCCESS : SSH2_MSG_CHANNEL_FAILURE); + packet_put_int(id); + packet_send(); + } + xfree(rtype); +} +static void +client_input_global_request(int type, u_int32_t seq, void *ctxt) +{ + char *rtype; + int want_reply; + int success = 0; + + rtype = packet_get_string(NULL); + want_reply = packet_get_char(); + debug("client_input_global_request: rtype %s want_reply %d", + rtype, want_reply); + if (want_reply) { + packet_start(success ? + SSH2_MSG_REQUEST_SUCCESS : SSH2_MSG_REQUEST_FAILURE); + packet_send(); + packet_write_wait(); + } + xfree(rtype); +} + +void +client_session2_setup(int id, int want_tty, int want_subsystem, + const char *term, struct termios *tiop, int in_fd, Buffer *cmd, char **env, + dispatch_fn *subsys_repl) +{ + int len; + Channel *c = NULL; + + debug2("%s: id %d", __func__, id); + + if ((c = channel_lookup(id)) == NULL) + fatal("client_session2_setup: channel %d: unknown channel", id); + + if (want_tty) { + struct winsize ws; + struct termios tio; + + /* Store window size in the packet. */ + if (ioctl(in_fd, TIOCGWINSZ, &ws) < 0) + memset(&ws, 0, sizeof(ws)); + + channel_request_start(id, "pty-req", 0); + packet_put_cstring(term != NULL ? term : ""); + packet_put_int((u_int)ws.ws_col); + packet_put_int((u_int)ws.ws_row); + packet_put_int((u_int)ws.ws_xpixel); + packet_put_int((u_int)ws.ws_ypixel); + tio = get_saved_tio(); + tty_make_modes(-1, tiop != NULL ? tiop : &tio); + packet_send(); + /* XXX wait for reply */ + c->client_tty = 1; + } + + /* Transfer any environment variables from client to server */ + if (options.num_send_env != 0 && env != NULL) { + int i, j, matched; + char *name, *val; + + debug("Sending environment."); + for (i = 0; env[i] != NULL; i++) { + /* Split */ + name = xstrdup(env[i]); + if ((val = strchr(name, '=')) == NULL) { + xfree(name); + continue; + } + *val++ = '\0'; + + matched = 0; + for (j = 0; j < options.num_send_env; j++) { + if (match_pattern(name, options.send_env[j])) { + matched = 1; + break; + } + } + if (!matched) { + debug3("Ignored env %s", name); + xfree(name); + continue; + } + + debug("Sending env %s = %s", name, val); + channel_request_start(id, "env", 0); + packet_put_cstring(name); + packet_put_cstring(val); + packet_send(); + xfree(name); + } + } + + len = buffer_len(cmd); + if (len > 0) { + if (len > 900) + len = 900; + if (want_subsystem) { + debug("Sending subsystem: %.*s", len, (u_char*)buffer_ptr(cmd)); + channel_request_start(id, "subsystem", subsys_repl != NULL); + if (subsys_repl != NULL) { + /* register callback for reply */ + /* XXX we assume that client_loop has already been called */ + dispatch_set(SSH2_MSG_CHANNEL_FAILURE, subsys_repl); + dispatch_set(SSH2_MSG_CHANNEL_SUCCESS, subsys_repl); + } + } else { + debug("Sending command: %.*s", len, (u_char*)buffer_ptr(cmd)); + channel_request_start(id, "exec", 0); + } + packet_put_string(buffer_ptr(cmd), buffer_len(cmd)); + packet_send(); + } else { + channel_request_start(id, "shell", 0); + packet_send(); + } +} + +static void +client_init_dispatch_20(void) +{ + dispatch_init(&dispatch_protocol_error); + + dispatch_set(SSH2_MSG_CHANNEL_CLOSE, &channel_input_oclose); + dispatch_set(SSH2_MSG_CHANNEL_DATA, &channel_input_data); + dispatch_set(SSH2_MSG_CHANNEL_EOF, &channel_input_ieof); + dispatch_set(SSH2_MSG_CHANNEL_EXTENDED_DATA, &channel_input_extended_data); + dispatch_set(SSH2_MSG_CHANNEL_OPEN, &client_input_channel_open); + dispatch_set(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation); + dispatch_set(SSH2_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure); + dispatch_set(SSH2_MSG_CHANNEL_REQUEST, &client_input_channel_req); + dispatch_set(SSH2_MSG_CHANNEL_WINDOW_ADJUST, &channel_input_window_adjust); + dispatch_set(SSH2_MSG_GLOBAL_REQUEST, &client_input_global_request); + + /* rekeying */ + dispatch_set(SSH2_MSG_KEXINIT, &kex_input_kexinit); + + /* global request reply messages */ + dispatch_set(SSH2_MSG_REQUEST_FAILURE, &client_global_request_reply); + dispatch_set(SSH2_MSG_REQUEST_SUCCESS, &client_global_request_reply); +} +static void +client_init_dispatch_13(void) +{ + dispatch_init(NULL); + dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_close); + dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, &channel_input_close_confirmation); + dispatch_set(SSH_MSG_CHANNEL_DATA, &channel_input_data); + dispatch_set(SSH_MSG_CHANNEL_OPEN_CONFIRMATION, &channel_input_open_confirmation); + dispatch_set(SSH_MSG_CHANNEL_OPEN_FAILURE, &channel_input_open_failure); + dispatch_set(SSH_MSG_PORT_OPEN, &channel_input_port_open); + dispatch_set(SSH_SMSG_EXITSTATUS, &client_input_exit_status); + dispatch_set(SSH_SMSG_STDERR_DATA, &client_input_stderr_data); + dispatch_set(SSH_SMSG_STDOUT_DATA, &client_input_stdout_data); + + dispatch_set(SSH_SMSG_AGENT_OPEN, options.forward_agent ? + &client_input_agent_open : &deny_input_open); + dispatch_set(SSH_SMSG_X11_OPEN, options.forward_x11 ? + &x11_input_open : &deny_input_open); +} +static void +client_init_dispatch_15(void) +{ + client_init_dispatch_13(); + dispatch_set(SSH_MSG_CHANNEL_CLOSE, &channel_input_ieof); + dispatch_set(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION, & channel_input_oclose); +} +static void +client_init_dispatch(void) +{ + if (compat20) + client_init_dispatch_20(); + else if (compat13) + client_init_dispatch_13(); + else + client_init_dispatch_15(); +} + +/* client specific fatal cleanup */ +void +cleanup_exit(int i) +{ + leave_raw_mode(); + leave_non_blocking(); + if (options.control_path != NULL && control_fd != -1) + unlink(options.control_path); + _exit(i); +} -- cgit v1.1