From d4691e641ba47cb86eef80f5c879e13f9d961724 Mon Sep 17 00:00:00 2001 From: peter Date: Wed, 18 Sep 1996 05:35:50 +0000 Subject: Import of unmodified (but trimmed) gcc-2.7.2. The bigger parts of the non-i386, non-unix, and generatable files have been trimmed, but can easily be added in later if needed. gcc-2.7.2.1 will follow shortly, it's a very small delta to this and it's handy to have both available for reference for such little cost. The freebsd-specific changes will then be committed, and once the dust has settled, the bmakefiles will be committed to use this code. --- contrib/gcc/final.c | 3151 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3151 insertions(+) create mode 100644 contrib/gcc/final.c (limited to 'contrib/gcc/final.c') diff --git a/contrib/gcc/final.c b/contrib/gcc/final.c new file mode 100644 index 0000000..481782e --- /dev/null +++ b/contrib/gcc/final.c @@ -0,0 +1,3151 @@ +/* Convert RTL to assembler code and output it, for GNU compiler. + Copyright (C) 1987, 88, 89, 92, 93, 94, 1995 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + + +/* This is the final pass of the compiler. + It looks at the rtl code for a function and outputs assembler code. + + Call `final_start_function' to output the assembler code for function entry, + `final' to output assembler code for some RTL code, + `final_end_function' to output assembler code for function exit. + If a function is compiled in several pieces, each piece is + output separately with `final'. + + Some optimizations are also done at this level. + Move instructions that were made unnecessary by good register allocation + are detected and omitted from the output. (Though most of these + are removed by the last jump pass.) + + Instructions to set the condition codes are omitted when it can be + seen that the condition codes already had the desired values. + + In some cases it is sufficient if the inherited condition codes + have related values, but this may require the following insn + (the one that tests the condition codes) to be modified. + + The code for the function prologue and epilogue are generated + directly as assembler code by the macros FUNCTION_PROLOGUE and + FUNCTION_EPILOGUE. Those instructions never exist as rtl. */ + +#include "config.h" +#ifdef __STDC__ +#include +#else +#include +#endif +#include +#include + +#include "tree.h" +#include "rtl.h" +#include "regs.h" +#include "insn-config.h" +#include "insn-flags.h" +#include "insn-attr.h" +#include "insn-codes.h" +#include "recog.h" +#include "conditions.h" +#include "flags.h" +#include "real.h" +#include "hard-reg-set.h" +#include "defaults.h" +#include "output.h" + +/* Get N_SLINE and N_SOL from stab.h if we can expect the file to exist. */ +#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO) +#if defined (USG) || defined (NO_STAB_H) +#include "gstab.h" /* If doing DBX on sysV, use our own stab.h. */ +#else +#include /* On BSD, use the system's stab.h. */ +#endif /* not USG */ +#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */ + +#ifdef XCOFF_DEBUGGING_INFO +#include "xcoffout.h" +#endif + +/* .stabd code for line number. */ +#ifndef N_SLINE +#define N_SLINE 0x44 +#endif + +/* .stabs code for included file name. */ +#ifndef N_SOL +#define N_SOL 0x84 +#endif + +#ifndef INT_TYPE_SIZE +#define INT_TYPE_SIZE BITS_PER_WORD +#endif + +/* If we aren't using cc0, CC_STATUS_INIT shouldn't exist. So define a + null default for it to save conditionalization later. */ +#ifndef CC_STATUS_INIT +#define CC_STATUS_INIT +#endif + +/* How to start an assembler comment. */ +#ifndef ASM_COMMENT_START +#define ASM_COMMENT_START ";#" +#endif + +/* Is the given character a logical line separator for the assembler? */ +#ifndef IS_ASM_LOGICAL_LINE_SEPARATOR +#define IS_ASM_LOGICAL_LINE_SEPARATOR(C) ((C) == ';') +#endif + +/* Nonzero means this function is a leaf function, with no function calls. + This variable exists to be examined in FUNCTION_PROLOGUE + and FUNCTION_EPILOGUE. Always zero, unless set by some action. */ +int leaf_function; + +/* Last insn processed by final_scan_insn. */ +static rtx debug_insn = 0; + +/* Line number of last NOTE. */ +static int last_linenum; + +/* Highest line number in current block. */ +static int high_block_linenum; + +/* Likewise for function. */ +static int high_function_linenum; + +/* Filename of last NOTE. */ +static char *last_filename; + +/* Number of basic blocks seen so far; + used if profile_block_flag is set. */ +static int count_basic_blocks; + +/* Nonzero while outputting an `asm' with operands. + This means that inconsistencies are the user's fault, so don't abort. + The precise value is the insn being output, to pass to error_for_asm. */ +static rtx this_is_asm_operands; + +/* Number of operands of this insn, for an `asm' with operands. */ +static int insn_noperands; + +/* Compare optimization flag. */ + +static rtx last_ignored_compare = 0; + +/* Flag indicating this insn is the start of a new basic block. */ + +static int new_block = 1; + +/* All the symbol-blocks (levels of scoping) in the compilation + are assigned sequence numbers in order of appearance of the + beginnings of the symbol-blocks. Both final and dbxout do this, + and assume that they will both give the same number to each block. + Final uses these sequence numbers to generate assembler label names + LBBnnn and LBEnnn for the beginning and end of the symbol-block. + Dbxout uses the sequence numbers to generate references to the same labels + from the dbx debugging information. + + Sdb records this level at the beginning of each function, + in order to find the current level when recursing down declarations. + It outputs the block beginning and endings + at the point in the asm file where the blocks would begin and end. */ + +int next_block_index; + +/* Assign a unique number to each insn that is output. + This can be used to generate unique local labels. */ + +static int insn_counter = 0; + +#ifdef HAVE_cc0 +/* This variable contains machine-dependent flags (defined in tm.h) + set and examined by output routines + that describe how to interpret the condition codes properly. */ + +CC_STATUS cc_status; + +/* During output of an insn, this contains a copy of cc_status + from before the insn. */ + +CC_STATUS cc_prev_status; +#endif + +/* Indexed by hardware reg number, is 1 if that register is ever + used in the current function. + + In life_analysis, or in stupid_life_analysis, this is set + up to record the hard regs used explicitly. Reload adds + in the hard regs used for holding pseudo regs. Final uses + it to generate the code in the function prologue and epilogue + to save and restore registers as needed. */ + +char regs_ever_live[FIRST_PSEUDO_REGISTER]; + +/* Nonzero means current function must be given a frame pointer. + Set in stmt.c if anything is allocated on the stack there. + Set in reload1.c if anything is allocated on the stack there. */ + +int frame_pointer_needed; + +/* Assign unique numbers to labels generated for profiling. */ + +int profile_label_no; + +/* Length so far allocated in PENDING_BLOCKS. */ + +static int max_block_depth; + +/* Stack of sequence numbers of symbol-blocks of which we have seen the + beginning but not yet the end. Sequence numbers are assigned at + the beginning; this stack allows us to find the sequence number + of a block that is ending. */ + +static int *pending_blocks; + +/* Number of elements currently in use in PENDING_BLOCKS. */ + +static int block_depth; + +/* Nonzero if have enabled APP processing of our assembler output. */ + +static int app_on; + +/* If we are outputting an insn sequence, this contains the sequence rtx. + Zero otherwise. */ + +rtx final_sequence; + +#ifdef ASSEMBLER_DIALECT + +/* Number of the assembler dialect to use, starting at 0. */ +static int dialect_number; +#endif + +/* Indexed by line number, nonzero if there is a note for that line. */ + +static char *line_note_exists; + +/* Linked list to hold line numbers for each basic block. */ + +struct bb_list { + struct bb_list *next; /* pointer to next basic block */ + int line_num; /* line number */ + int file_label_num; /* LPBC label # for stored filename */ + int func_label_num; /* LPBC label # for stored function name */ +}; + +static struct bb_list *bb_head = 0; /* Head of basic block list */ +static struct bb_list **bb_tail = &bb_head; /* Ptr to store next bb ptr */ +static int bb_file_label_num = -1; /* Current label # for file */ +static int bb_func_label_num = -1; /* Current label # for func */ + +/* Linked list to hold the strings for each file and function name output. */ + +struct bb_str { + struct bb_str *next; /* pointer to next string */ + char *string; /* string */ + int label_num; /* label number */ + int length; /* string length */ +}; + +extern rtx peephole PROTO((rtx)); + +static struct bb_str *sbb_head = 0; /* Head of string list. */ +static struct bb_str **sbb_tail = &sbb_head; /* Ptr to store next bb str */ +static int sbb_label_num = 0; /* Last label used */ + +static int asm_insn_count PROTO((rtx)); +static void profile_function PROTO((FILE *)); +static void profile_after_prologue PROTO((FILE *)); +static void add_bb PROTO((FILE *)); +static int add_bb_string PROTO((char *, int)); +static void output_source_line PROTO((FILE *, rtx)); +static rtx walk_alter_subreg PROTO((rtx)); +static int alter_cond PROTO((rtx)); +static void output_asm_name PROTO((void)); +static void output_operand PROTO((rtx, int)); +static void leaf_renumber_regs PROTO((rtx)); + +extern char *getpwd (); + +/* Initialize data in final at the beginning of a compilation. */ + +void +init_final (filename) + char *filename; +{ + next_block_index = 2; + app_on = 0; + max_block_depth = 20; + pending_blocks = (int *) xmalloc (20 * sizeof *pending_blocks); + final_sequence = 0; + +#ifdef ASSEMBLER_DIALECT + dialect_number = ASSEMBLER_DIALECT; +#endif +} + +/* Called at end of source file, + to output the block-profiling table for this entire compilation. */ + +void +end_final (filename) + char *filename; +{ + int i; + + if (profile_block_flag) + { + char name[20]; + int align = exact_log2 (BIGGEST_ALIGNMENT / BITS_PER_UNIT); + int size = (POINTER_SIZE / BITS_PER_UNIT) * count_basic_blocks; + int rounded = size; + struct bb_list *ptr; + struct bb_str *sptr; + + rounded += (BIGGEST_ALIGNMENT / BITS_PER_UNIT) - 1; + rounded = (rounded / (BIGGEST_ALIGNMENT / BITS_PER_UNIT) + * (BIGGEST_ALIGNMENT / BITS_PER_UNIT)); + + data_section (); + + /* Output the main header, of 10 words: + 0: 1 if this file's initialized, else 0. + 1: address of file name (LPBX1). + 2: address of table of counts (LPBX2). + 3: number of counts in the table. + 4: always 0, for compatibility with Sun. + + The following are GNU extensions: + + 5: address of table of start addrs of basic blocks (LPBX3). + 6: Number of bytes in this header. + 7: address of table of function names (LPBX4). + 8: address of table of line numbers (LPBX5) or 0. + 9: address of table of file names (LPBX6) or 0. */ + + ASM_OUTPUT_ALIGN (asm_out_file, align); + + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 0); + /* zero word */ + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + + /* address of filename */ + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 1); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + + /* address of count table */ + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 2); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + + /* count of the # of basic blocks */ + assemble_integer (GEN_INT (count_basic_blocks), UNITS_PER_WORD, 1); + + /* zero word (link field) */ + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + + /* address of basic block start address table */ + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 3); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + + /* byte count for extended structure. */ + assemble_integer (GEN_INT (10 * UNITS_PER_WORD), UNITS_PER_WORD, 1); + + /* address of function name table */ + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 4); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + + /* address of line number and filename tables if debugging. */ + if (write_symbols != NO_DEBUG) + { + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 5); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 6); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + } + else + { + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + } + + /* Output the file name changing the suffix to .d for Sun tcov + compatibility. */ + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 1); + { + char *cwd = getpwd (); + int len = strlen (filename) + strlen (cwd) + 1; + char *data_file = (char *) alloca (len + 4); + + strcpy (data_file, cwd); + strcat (data_file, "/"); + strcat (data_file, filename); + strip_off_ending (data_file, len); + strcat (data_file, ".d"); + assemble_string (data_file, strlen (data_file) + 1); + } + + /* Make space for the table of counts. */ + if (flag_no_common || size == 0) + { + /* Realign data section. */ + ASM_OUTPUT_ALIGN (asm_out_file, align); + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 2); + if (size != 0) + assemble_zeros (size); + } + else + { + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 2); +#ifdef ASM_OUTPUT_SHARED_LOCAL + if (flag_shared_data) + ASM_OUTPUT_SHARED_LOCAL (asm_out_file, name, size, rounded); + else +#endif +#ifdef ASM_OUTPUT_ALIGNED_LOCAL + ASM_OUTPUT_ALIGNED_LOCAL (asm_out_file, name, size, + BIGGEST_ALIGNMENT); +#else + ASM_OUTPUT_LOCAL (asm_out_file, name, size, rounded); +#endif + } + + /* Output any basic block strings */ + readonly_data_section (); + if (sbb_head) + { + ASM_OUTPUT_ALIGN (asm_out_file, align); + for (sptr = sbb_head; sptr != 0; sptr = sptr->next) + { + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBC", sptr->label_num); + assemble_string (sptr->string, sptr->length); + } + } + + /* Output the table of addresses. */ + /* Realign in new section */ + ASM_OUTPUT_ALIGN (asm_out_file, align); + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 3); + for (i = 0; i < count_basic_blocks; i++) + { + ASM_GENERATE_INTERNAL_LABEL (name, "LPB", i); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), + UNITS_PER_WORD, 1); + } + + /* Output the table of function names. */ + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 4); + for ((ptr = bb_head), (i = 0); ptr != 0; (ptr = ptr->next), i++) + { + if (ptr->func_label_num >= 0) + { + ASM_GENERATE_INTERNAL_LABEL (name, "LPBC", ptr->func_label_num); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), + UNITS_PER_WORD, 1); + } + else + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + } + + for ( ; i < count_basic_blocks; i++) + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + + if (write_symbols != NO_DEBUG) + { + /* Output the table of line numbers. */ + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 5); + for ((ptr = bb_head), (i = 0); ptr != 0; (ptr = ptr->next), i++) + assemble_integer (GEN_INT (ptr->line_num), UNITS_PER_WORD, 1); + + for ( ; i < count_basic_blocks; i++) + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + + /* Output the table of file names. */ + ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "LPBX", 6); + for ((ptr = bb_head), (i = 0); ptr != 0; (ptr = ptr->next), i++) + { + if (ptr->file_label_num >= 0) + { + ASM_GENERATE_INTERNAL_LABEL (name, "LPBC", ptr->file_label_num); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), + UNITS_PER_WORD, 1); + } + else + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + } + + for ( ; i < count_basic_blocks; i++) + assemble_integer (const0_rtx, UNITS_PER_WORD, 1); + } + + /* End with the address of the table of addresses, + so we can find it easily, as the last word in the file's text. */ + ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 3); + assemble_integer (gen_rtx (SYMBOL_REF, Pmode, name), UNITS_PER_WORD, 1); + } +} + +/* Enable APP processing of subsequent output. + Used before the output from an `asm' statement. */ + +void +app_enable () +{ + if (! app_on) + { + fprintf (asm_out_file, ASM_APP_ON); + app_on = 1; + } +} + +/* Disable APP processing of subsequent output. + Called from varasm.c before most kinds of output. */ + +void +app_disable () +{ + if (app_on) + { + fprintf (asm_out_file, ASM_APP_OFF); + app_on = 0; + } +} + +/* Return the number of slots filled in the current + delayed branch sequence (we don't count the insn needing the + delay slot). Zero if not in a delayed branch sequence. */ + +#ifdef DELAY_SLOTS +int +dbr_sequence_length () +{ + if (final_sequence != 0) + return XVECLEN (final_sequence, 0) - 1; + else + return 0; +} +#endif + +/* The next two pages contain routines used to compute the length of an insn + and to shorten branches. */ + +/* Arrays for insn lengths, and addresses. The latter is referenced by + `insn_current_length'. */ + +static short *insn_lengths; +int *insn_addresses; + +/* Address of insn being processed. Used by `insn_current_length'. */ +int insn_current_address; + +/* Indicate that branch shortening hasn't yet been done. */ + +void +init_insn_lengths () +{ + insn_lengths = 0; +} + +/* Obtain the current length of an insn. If branch shortening has been done, + get its actual length. Otherwise, get its maximum length. */ + +int +get_attr_length (insn) + rtx insn; +{ +#ifdef HAVE_ATTR_length + rtx body; + int i; + int length = 0; + + if (insn_lengths) + return insn_lengths[INSN_UID (insn)]; + else + switch (GET_CODE (insn)) + { + case NOTE: + case BARRIER: + case CODE_LABEL: + return 0; + + case CALL_INSN: + length = insn_default_length (insn); + break; + + case JUMP_INSN: + body = PATTERN (insn); + if (GET_CODE (body) == ADDR_VEC || GET_CODE (body) == ADDR_DIFF_VEC) + { + /* This only takes room if jump tables go into the text section. */ +#if !defined(READONLY_DATA_SECTION) || defined(JUMP_TABLES_IN_TEXT_SECTION) + length = (XVECLEN (body, GET_CODE (body) == ADDR_DIFF_VEC) + * GET_MODE_SIZE (GET_MODE (body))); + + /* Be pessimistic and assume worst-case alignment. */ + length += (GET_MODE_SIZE (GET_MODE (body)) - 1); +#else + return 0; +#endif + } + else + length = insn_default_length (insn); + break; + + case INSN: + body = PATTERN (insn); + if (GET_CODE (body) == USE || GET_CODE (body) == CLOBBER) + return 0; + + else if (GET_CODE (body) == ASM_INPUT || asm_noperands (body) >= 0) + length = asm_insn_count (body) * insn_default_length (insn); + else if (GET_CODE (body) == SEQUENCE) + for (i = 0; i < XVECLEN (body, 0); i++) + length += get_attr_length (XVECEXP (body, 0, i)); + else + length = insn_default_length (insn); + } + +#ifdef ADJUST_INSN_LENGTH + ADJUST_INSN_LENGTH (insn, length); +#endif + return length; +#else /* not HAVE_ATTR_length */ + return 0; +#endif /* not HAVE_ATTR_length */ +} + +/* Make a pass over all insns and compute their actual lengths by shortening + any branches of variable length if possible. */ + +/* Give a default value for the lowest address in a function. */ + +#ifndef FIRST_INSN_ADDRESS +#define FIRST_INSN_ADDRESS 0 +#endif + +void +shorten_branches (first) + rtx first; +{ +#ifdef HAVE_ATTR_length + rtx insn; + int something_changed = 1; + int max_uid = 0; + char *varying_length; + rtx body; + int uid; + + /* Compute maximum UID and allocate arrays. */ + for (insn = first; insn; insn = NEXT_INSN (insn)) + if (INSN_UID (insn) > max_uid) + max_uid = INSN_UID (insn); + + max_uid++; + insn_lengths = (short *) oballoc (max_uid * sizeof (short)); + insn_addresses = (int *) oballoc (max_uid * sizeof (int)); + varying_length = (char *) oballoc (max_uid * sizeof (char)); + + /* Compute initial lengths, addresses, and varying flags for each insn. */ + for (insn_current_address = FIRST_INSN_ADDRESS, insn = first; + insn != 0; + insn_current_address += insn_lengths[uid], insn = NEXT_INSN (insn)) + { + uid = INSN_UID (insn); + insn_addresses[uid] = insn_current_address; + insn_lengths[uid] = 0; + varying_length[uid] = 0; + + if (GET_CODE (insn) == NOTE || GET_CODE (insn) == BARRIER + || GET_CODE (insn) == CODE_LABEL) + continue; + + body = PATTERN (insn); + if (GET_CODE (body) == ADDR_VEC || GET_CODE (body) == ADDR_DIFF_VEC) + { + /* This only takes room if read-only data goes into the text + section. */ +#if !defined(READONLY_DATA_SECTION) || defined(JUMP_TABLES_IN_TEXT_SECTION) + int unitsize = GET_MODE_SIZE (GET_MODE (body)); + + insn_lengths[uid] = (XVECLEN (body, GET_CODE (body) == ADDR_DIFF_VEC) + * GET_MODE_SIZE (GET_MODE (body))); + + /* Account for possible alignment. */ + insn_lengths[uid] + += unitsize - (insn_current_address & (unitsize - 1)); +#else + ; +#endif + } + else if (asm_noperands (body) >= 0) + insn_lengths[uid] = asm_insn_count (body) * insn_default_length (insn); + else if (GET_CODE (body) == SEQUENCE) + { + int i; + int const_delay_slots; +#ifdef DELAY_SLOTS + const_delay_slots = const_num_delay_slots (XVECEXP (body, 0, 0)); +#else + const_delay_slots = 0; +#endif + /* Inside a delay slot sequence, we do not do any branch shortening + if the shortening could change the number of delay slots + of the branch. */ + for (i = 0; i < XVECLEN (body, 0); i++) + { + rtx inner_insn = XVECEXP (body, 0, i); + int inner_uid = INSN_UID (inner_insn); + int inner_length; + + if (asm_noperands (PATTERN (XVECEXP (body, 0, i))) >= 0) + inner_length = (asm_insn_count (PATTERN (inner_insn)) + * insn_default_length (inner_insn)); + else + inner_length = insn_default_length (inner_insn); + + insn_lengths[inner_uid] = inner_length; + if (const_delay_slots) + { + if ((varying_length[inner_uid] + = insn_variable_length_p (inner_insn)) != 0) + varying_length[uid] = 1; + insn_addresses[inner_uid] = (insn_current_address + + insn_lengths[uid]); + } + else + varying_length[inner_uid] = 0; + insn_lengths[uid] += inner_length; + } + } + else if (GET_CODE (body) != USE && GET_CODE (body) != CLOBBER) + { + insn_lengths[uid] = insn_default_length (insn); + varying_length[uid] = insn_variable_length_p (insn); + } + + /* If needed, do any adjustment. */ +#ifdef ADJUST_INSN_LENGTH + ADJUST_INSN_LENGTH (insn, insn_lengths[uid]); +#endif + } + + /* Now loop over all the insns finding varying length insns. For each, + get the current insn length. If it has changed, reflect the change. + When nothing changes for a full pass, we are done. */ + + while (something_changed) + { + something_changed = 0; + for (insn_current_address = FIRST_INSN_ADDRESS, insn = first; + insn != 0; + insn = NEXT_INSN (insn)) + { + int new_length; + int tmp_length; + + uid = INSN_UID (insn); + insn_addresses[uid] = insn_current_address; + if (! varying_length[uid]) + { + insn_current_address += insn_lengths[uid]; + continue; + } + if (GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE) + { + int i; + + body = PATTERN (insn); + new_length = 0; + for (i = 0; i < XVECLEN (body, 0); i++) + { + rtx inner_insn = XVECEXP (body, 0, i); + int inner_uid = INSN_UID (inner_insn); + int inner_length; + + insn_addresses[inner_uid] = insn_current_address; + + /* insn_current_length returns 0 for insns with a + non-varying length. */ + if (! varying_length[inner_uid]) + inner_length = insn_lengths[inner_uid]; + else + inner_length = insn_current_length (inner_insn); + + if (inner_length != insn_lengths[inner_uid]) + { + insn_lengths[inner_uid] = inner_length; + something_changed = 1; + } + insn_current_address += insn_lengths[inner_uid]; + new_length += inner_length; + } + } + else + { + new_length = insn_current_length (insn); + insn_current_address += new_length; + } + +#ifdef SHORTEN_WITH_ADJUST_INSN_LENGTH +#ifdef ADJUST_INSN_LENGTH + /* If needed, do any adjustment. */ + tmp_length = new_length; + ADJUST_INSN_LENGTH (insn, new_length); + insn_current_address += (new_length - tmp_length); +#endif +#endif + + if (new_length != insn_lengths[uid]) + { + insn_lengths[uid] = new_length; + something_changed = 1; + } + } + /* For a non-optimizing compile, do only a single pass. */ + if (!optimize) + break; + } +#endif /* HAVE_ATTR_length */ +} + +#ifdef HAVE_ATTR_length +/* Given the body of an INSN known to be generated by an ASM statement, return + the number of machine instructions likely to be generated for this insn. + This is used to compute its length. */ + +static int +asm_insn_count (body) + rtx body; +{ + char *template; + int count = 1; + + if (GET_CODE (body) == ASM_INPUT) + template = XSTR (body, 0); + else + template = decode_asm_operands (body, NULL_PTR, NULL_PTR, + NULL_PTR, NULL_PTR); + + for ( ; *template; template++) + if (IS_ASM_LOGICAL_LINE_SEPARATOR(*template) || *template == '\n') + count++; + + return count; +} +#endif + +/* Output assembler code for the start of a function, + and initialize some of the variables in this file + for the new function. The label for the function and associated + assembler pseudo-ops have already been output in `assemble_start_function'. + + FIRST is the first insn of the rtl for the function being compiled. + FILE is the file to write assembler code to. + OPTIMIZE is nonzero if we should eliminate redundant + test and compare insns. */ + +void +final_start_function (first, file, optimize) + rtx first; + FILE *file; + int optimize; +{ + block_depth = 0; + + this_is_asm_operands = 0; + +#ifdef NON_SAVING_SETJMP + /* A function that calls setjmp should save and restore all the + call-saved registers on a system where longjmp clobbers them. */ + if (NON_SAVING_SETJMP && current_function_calls_setjmp) + { + int i; + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + if (!call_used_regs[i] && !call_fixed_regs[i]) + regs_ever_live[i] = 1; + } +#endif + + /* Initial line number is supposed to be output + before the function's prologue and label + so that the function's address will not appear to be + in the last statement of the preceding function. */ + if (NOTE_LINE_NUMBER (first) != NOTE_INSN_DELETED) + last_linenum = high_block_linenum = high_function_linenum + = NOTE_LINE_NUMBER (first); + + /* For SDB and XCOFF, the function beginning must be marked between + the function label and the prologue. We always need this, even when + -g1 was used. Defer on MIPS systems so that parameter descriptions + follow function entry. */ +#if defined(SDB_DEBUGGING_INFO) && !defined(MIPS_DEBUGGING_INFO) + if (write_symbols == SDB_DEBUG) + sdbout_begin_function (last_linenum); + else +#endif +#ifdef XCOFF_DEBUGGING_INFO + if (write_symbols == XCOFF_DEBUG) + xcoffout_begin_function (file, last_linenum); + else +#endif + /* But only output line number for other debug info types if -g2 + or better. */ + if (NOTE_LINE_NUMBER (first) != NOTE_INSN_DELETED) + output_source_line (file, first); + +#ifdef LEAF_REG_REMAP + if (leaf_function) + leaf_renumber_regs (first); +#endif + + /* The Sun386i and perhaps other machines don't work right + if the profiling code comes after the prologue. */ +#ifdef PROFILE_BEFORE_PROLOGUE + if (profile_flag) + profile_function (file); +#endif /* PROFILE_BEFORE_PROLOGUE */ + +#ifdef FUNCTION_PROLOGUE + /* First output the function prologue: code to set up the stack frame. */ + FUNCTION_PROLOGUE (file, get_frame_size ()); +#endif + +#if defined (SDB_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO) + if (write_symbols == SDB_DEBUG || write_symbols == XCOFF_DEBUG) + next_block_index = 1; +#endif + + /* If the machine represents the prologue as RTL, the profiling code must + be emitted when NOTE_INSN_PROLOGUE_END is scanned. */ +#ifdef HAVE_prologue + if (! HAVE_prologue) +#endif + profile_after_prologue (file); + + profile_label_no++; + + /* If we are doing basic block profiling, remember a printable version + of the function name. */ + if (profile_block_flag) + { + char *junk = "function"; + bb_func_label_num = + add_bb_string ((*decl_printable_name) (current_function_decl, &junk), FALSE); + } +} + +static void +profile_after_prologue (file) + FILE *file; +{ +#ifdef FUNCTION_BLOCK_PROFILER + if (profile_block_flag) + { + FUNCTION_BLOCK_PROFILER (file, profile_label_no); + } +#endif /* FUNCTION_BLOCK_PROFILER */ + +#ifndef PROFILE_BEFORE_PROLOGUE + if (profile_flag) + profile_function (file); +#endif /* not PROFILE_BEFORE_PROLOGUE */ +} + +static void +profile_function (file) + FILE *file; +{ + int align = MIN (BIGGEST_ALIGNMENT, POINTER_SIZE); + int sval = current_function_returns_struct; + int cxt = current_function_needs_context; + + data_section (); + ASM_OUTPUT_ALIGN (file, floor_log2 (align / BITS_PER_UNIT)); + ASM_OUTPUT_INTERNAL_LABEL (file, "LP", profile_label_no); + assemble_integer (const0_rtx, POINTER_SIZE / BITS_PER_UNIT, 1); + + text_section (); + +#ifdef STRUCT_VALUE_INCOMING_REGNUM + if (sval) + ASM_OUTPUT_REG_PUSH (file, STRUCT_VALUE_INCOMING_REGNUM); +#else +#ifdef STRUCT_VALUE_REGNUM + if (sval) + ASM_OUTPUT_REG_PUSH (file, STRUCT_VALUE_REGNUM); +#endif +#endif + +#if 0 +#ifdef STATIC_CHAIN_INCOMING_REGNUM + if (cxt) + ASM_OUTPUT_REG_PUSH (file, STATIC_CHAIN_INCOMING_REGNUM); +#else +#ifdef STATIC_CHAIN_REGNUM + if (cxt) + ASM_OUTPUT_REG_PUSH (file, STATIC_CHAIN_REGNUM); +#endif +#endif +#endif /* 0 */ + + FUNCTION_PROFILER (file, profile_label_no); + +#if 0 +#ifdef STATIC_CHAIN_INCOMING_REGNUM + if (cxt) + ASM_OUTPUT_REG_POP (file, STATIC_CHAIN_INCOMING_REGNUM); +#else +#ifdef STATIC_CHAIN_REGNUM + if (cxt) + ASM_OUTPUT_REG_POP (file, STATIC_CHAIN_REGNUM); +#endif +#endif +#endif /* 0 */ + +#ifdef STRUCT_VALUE_INCOMING_REGNUM + if (sval) + ASM_OUTPUT_REG_POP (file, STRUCT_VALUE_INCOMING_REGNUM); +#else +#ifdef STRUCT_VALUE_REGNUM + if (sval) + ASM_OUTPUT_REG_POP (file, STRUCT_VALUE_REGNUM); +#endif +#endif +} + +/* Output assembler code for the end of a function. + For clarity, args are same as those of `final_start_function' + even though not all of them are needed. */ + +void +final_end_function (first, file, optimize) + rtx first; + FILE *file; + int optimize; +{ + if (app_on) + { + fprintf (file, ASM_APP_OFF); + app_on = 0; + } + +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG) + sdbout_end_function (high_function_linenum); +#endif + +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG) + dwarfout_end_function (); +#endif + +#ifdef XCOFF_DEBUGGING_INFO + if (write_symbols == XCOFF_DEBUG) + xcoffout_end_function (file, high_function_linenum); +#endif + +#ifdef FUNCTION_EPILOGUE + /* Finally, output the function epilogue: + code to restore the stack frame and return to the caller. */ + FUNCTION_EPILOGUE (file, get_frame_size ()); +#endif + +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG) + sdbout_end_epilogue (); +#endif + +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG) + dwarfout_end_epilogue (); +#endif + +#ifdef XCOFF_DEBUGGING_INFO + if (write_symbols == XCOFF_DEBUG) + xcoffout_end_epilogue (file); +#endif + + bb_func_label_num = -1; /* not in function, nuke label # */ + + /* If FUNCTION_EPILOGUE is not defined, then the function body + itself contains return instructions wherever needed. */ +} + +/* Add a block to the linked list that remembers the current line/file/function + for basic block profiling. Emit the label in front of the basic block and + the instructions that increment the count field. */ + +static void +add_bb (file) + FILE *file; +{ + struct bb_list *ptr = (struct bb_list *) permalloc (sizeof (struct bb_list)); + + /* Add basic block to linked list. */ + ptr->next = 0; + ptr->line_num = last_linenum; + ptr->file_label_num = bb_file_label_num; + ptr->func_label_num = bb_func_label_num; + *bb_tail = ptr; + bb_tail = &ptr->next; + + /* Enable the table of basic-block use counts + to point at the code it applies to. */ + ASM_OUTPUT_INTERNAL_LABEL (file, "LPB", count_basic_blocks); + + /* Before first insn of this basic block, increment the + count of times it was entered. */ +#ifdef BLOCK_PROFILER + BLOCK_PROFILER (file, count_basic_blocks); + CC_STATUS_INIT; +#endif + + new_block = 0; + count_basic_blocks++; +} + +/* Add a string to be used for basic block profiling. */ + +static int +add_bb_string (string, perm_p) + char *string; + int perm_p; +{ + int len; + struct bb_str *ptr = 0; + + if (!string) + { + string = ""; + perm_p = TRUE; + } + + /* Allocate a new string if the current string isn't permanent. If + the string is permanent search for the same string in other + allocations. */ + + len = strlen (string) + 1; + if (!perm_p) + { + char *p = (char *) permalloc (len); + bcopy (string, p, len); + string = p; + } + else + for (ptr = sbb_head; ptr != (struct bb_str *)0; ptr = ptr->next) + if (ptr->string == string) + break; + + /* Allocate a new string block if we need to. */ + if (!ptr) + { + ptr = (struct bb_str *) permalloc (sizeof (*ptr)); + ptr->next = 0; + ptr->length = len; + ptr->label_num = sbb_label_num++; + ptr->string = string; + *sbb_tail = ptr; + sbb_tail = &ptr->next; + } + + return ptr->label_num; +} + + +/* Output assembler code for some insns: all or part of a function. + For description of args, see `final_start_function', above. + + PRESCAN is 1 if we are not really outputting, + just scanning as if we were outputting. + Prescanning deletes and rearranges insns just like ordinary output. + PRESCAN is -2 if we are outputting after having prescanned. + In this case, don't try to delete or rearrange insns + because that has already been done. + Prescanning is done only on certain machines. */ + +void +final (first, file, optimize, prescan) + rtx first; + FILE *file; + int optimize; + int prescan; +{ + register rtx insn; + int max_line = 0; + + last_ignored_compare = 0; + new_block = 1; + + /* Make a map indicating which line numbers appear in this function. + When producing SDB debugging info, delete troublesome line number + notes from inlined functions in other files as well as duplicate + line number notes. */ +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG) + { + rtx last = 0; + for (insn = first; insn; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) > 0) + { + if ((RTX_INTEGRATED_P (insn) + && strcmp (NOTE_SOURCE_FILE (insn), main_input_filename) != 0) + || (last != 0 + && NOTE_LINE_NUMBER (insn) == NOTE_LINE_NUMBER (last) + && NOTE_SOURCE_FILE (insn) == NOTE_SOURCE_FILE (last))) + { + NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED; + NOTE_SOURCE_FILE (insn) = 0; + continue; + } + last = insn; + if (NOTE_LINE_NUMBER (insn) > max_line) + max_line = NOTE_LINE_NUMBER (insn); + } + } + else +#endif + { + for (insn = first; insn; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) > max_line) + max_line = NOTE_LINE_NUMBER (insn); + } + + line_note_exists = (char *) oballoc (max_line + 1); + bzero (line_note_exists, max_line + 1); + + for (insn = first; insn; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) > 0) + line_note_exists[NOTE_LINE_NUMBER (insn)] = 1; + + init_recog (); + + CC_STATUS_INIT; + + /* Output the insns. */ + for (insn = NEXT_INSN (first); insn;) + insn = final_scan_insn (insn, file, optimize, prescan, 0); + + /* Do basic-block profiling here + if the last insn was a conditional branch. */ + if (profile_block_flag && new_block) + add_bb (file); +} + +/* The final scan for one insn, INSN. + Args are same as in `final', except that INSN + is the insn being scanned. + Value returned is the next insn to be scanned. + + NOPEEPHOLES is the flag to disallow peephole processing (currently + used for within delayed branch sequence output). */ + +rtx +final_scan_insn (insn, file, optimize, prescan, nopeepholes) + rtx insn; + FILE *file; + int optimize; + int prescan; + int nopeepholes; +{ + register int i; + insn_counter++; + + /* Ignore deleted insns. These can occur when we split insns (due to a + template of "#") while not optimizing. */ + if (INSN_DELETED_P (insn)) + return NEXT_INSN (insn); + + switch (GET_CODE (insn)) + { + case NOTE: + if (prescan > 0) + break; + + /* Align the beginning of a loop, for higher speed + on certain machines. */ + + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG && optimize > 0) + { +#ifdef ASM_OUTPUT_LOOP_ALIGN + rtx next = next_nonnote_insn (insn); + if (next && GET_CODE (next) == CODE_LABEL) + { + ASM_OUTPUT_LOOP_ALIGN (asm_out_file); + } +#endif + break; + } + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END) + break; + + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_PROLOGUE_END) + { +#ifdef FUNCTION_END_PROLOGUE + FUNCTION_END_PROLOGUE (file); +#endif + profile_after_prologue (file); + break; + } + +#ifdef FUNCTION_BEGIN_EPILOGUE + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_EPILOGUE_BEG) + { + FUNCTION_BEGIN_EPILOGUE (file); + break; + } +#endif + + if (write_symbols == NO_DEBUG) + break; + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_BEG) + { +#if defined(SDB_DEBUGGING_INFO) && defined(MIPS_DEBUGGING_INFO) + /* MIPS stabs require the parameter descriptions to be after the + function entry point rather than before. */ + if (write_symbols == SDB_DEBUG) + sdbout_begin_function (last_linenum); + else +#endif +#ifdef DWARF_DEBUGGING_INFO + /* This outputs a marker where the function body starts, so it + must be after the prologue. */ + if (write_symbols == DWARF_DEBUG) + dwarfout_begin_function (); +#endif + break; + } + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_DELETED) + break; /* An insn that was "deleted" */ + if (app_on) + { + fprintf (file, ASM_APP_OFF); + app_on = 0; + } + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_BEG + && (debug_info_level == DINFO_LEVEL_NORMAL + || debug_info_level == DINFO_LEVEL_VERBOSE +#ifdef DWARF_DEBUGGING_INFO + || write_symbols == DWARF_DEBUG +#endif + ) + ) + { + /* Beginning of a symbol-block. Assign it a sequence number + and push the number onto the stack PENDING_BLOCKS. */ + + if (block_depth == max_block_depth) + { + /* PENDING_BLOCKS is full; make it longer. */ + max_block_depth *= 2; + pending_blocks + = (int *) xrealloc (pending_blocks, + max_block_depth * sizeof (int)); + } + pending_blocks[block_depth++] = next_block_index; + + high_block_linenum = last_linenum; + + /* Output debugging info about the symbol-block beginning. */ + +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG) + sdbout_begin_block (file, last_linenum, next_block_index); +#endif +#ifdef XCOFF_DEBUGGING_INFO + if (write_symbols == XCOFF_DEBUG) + xcoffout_begin_block (file, last_linenum, next_block_index); +#endif +#ifdef DBX_DEBUGGING_INFO + if (write_symbols == DBX_DEBUG) + ASM_OUTPUT_INTERNAL_LABEL (file, "LBB", next_block_index); +#endif +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG && block_depth > 1) + dwarfout_begin_block (next_block_index); +#endif + + next_block_index++; + } + else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_END + && (debug_info_level == DINFO_LEVEL_NORMAL + || debug_info_level == DINFO_LEVEL_VERBOSE +#ifdef DWARF_DEBUGGING_INFO + || write_symbols == DWARF_DEBUG +#endif + ) + ) + { + /* End of a symbol-block. Pop its sequence number off + PENDING_BLOCKS and output debugging info based on that. */ + + --block_depth; + +#ifdef XCOFF_DEBUGGING_INFO + if (write_symbols == XCOFF_DEBUG && block_depth >= 0) + xcoffout_end_block (file, high_block_linenum, + pending_blocks[block_depth]); +#endif +#ifdef DBX_DEBUGGING_INFO + if (write_symbols == DBX_DEBUG && block_depth >= 0) + ASM_OUTPUT_INTERNAL_LABEL (file, "LBE", + pending_blocks[block_depth]); +#endif +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG && block_depth >= 0) + sdbout_end_block (file, high_block_linenum, + pending_blocks[block_depth]); +#endif +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG && block_depth >= 1) + dwarfout_end_block (pending_blocks[block_depth]); +#endif + } + else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_DELETED_LABEL + && (debug_info_level == DINFO_LEVEL_NORMAL + || debug_info_level == DINFO_LEVEL_VERBOSE)) + { +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG) + dwarfout_label (insn); +#endif + } + else if (NOTE_LINE_NUMBER (insn) > 0) + /* This note is a line-number. */ + { + register rtx note; + +#if 0 /* This is what we used to do. */ + output_source_line (file, insn); +#endif + int note_after = 0; + + /* If there is anything real after this note, + output it. If another line note follows, omit this one. */ + for (note = NEXT_INSN (insn); note; note = NEXT_INSN (note)) + { + if (GET_CODE (note) != NOTE && GET_CODE (note) != CODE_LABEL) + break; + /* These types of notes can be significant + so make sure the preceding line number stays. */ + else if (GET_CODE (note) == NOTE + && (NOTE_LINE_NUMBER (note) == NOTE_INSN_BLOCK_BEG + || NOTE_LINE_NUMBER (note) == NOTE_INSN_BLOCK_END + || NOTE_LINE_NUMBER (note) == NOTE_INSN_FUNCTION_BEG)) + break; + else if (GET_CODE (note) == NOTE && NOTE_LINE_NUMBER (note) > 0) + { + /* Another line note follows; we can delete this note + if no intervening line numbers have notes elsewhere. */ + int num; + for (num = NOTE_LINE_NUMBER (insn) + 1; + num < NOTE_LINE_NUMBER (note); + num++) + if (line_note_exists[num]) + break; + + if (num >= NOTE_LINE_NUMBER (note)) + note_after = 1; + break; + } + } + + /* Output this line note + if it is the first or the last line note in a row. */ + if (!note_after) + output_source_line (file, insn); + } + break; + + case BARRIER: +#ifdef ASM_OUTPUT_ALIGN_CODE + /* Don't litter the assembler output with needless alignments. A + BARRIER will be placed at the end of every function if HAVE_epilogue + is true. */ + if (NEXT_INSN (insn)) + ASM_OUTPUT_ALIGN_CODE (file); +#endif + break; + + case CODE_LABEL: + CC_STATUS_INIT; + if (prescan > 0) + break; + new_block = 1; +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG && LABEL_NAME (insn)) + sdbout_label (insn); +#endif +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG && LABEL_NAME (insn)) + dwarfout_label (insn); +#endif + if (app_on) + { + fprintf (file, ASM_APP_OFF); + app_on = 0; + } + if (NEXT_INSN (insn) != 0 + && GET_CODE (NEXT_INSN (insn)) == JUMP_INSN) + { + rtx nextbody = PATTERN (NEXT_INSN (insn)); + + /* If this label is followed by a jump-table, + make sure we put the label in the read-only section. Also + possibly write the label and jump table together. */ + + if (GET_CODE (nextbody) == ADDR_VEC + || GET_CODE (nextbody) == ADDR_DIFF_VEC) + { +#ifndef JUMP_TABLES_IN_TEXT_SECTION + readonly_data_section (); +#ifdef READONLY_DATA_SECTION + ASM_OUTPUT_ALIGN (file, + exact_log2 (BIGGEST_ALIGNMENT + / BITS_PER_UNIT)); +#endif /* READONLY_DATA_SECTION */ +#else /* JUMP_TABLES_IN_TEXT_SECTION */ + function_section (current_function_decl); +#endif /* JUMP_TABLES_IN_TEXT_SECTION */ +#ifdef ASM_OUTPUT_CASE_LABEL + ASM_OUTPUT_CASE_LABEL (file, "L", CODE_LABEL_NUMBER (insn), + NEXT_INSN (insn)); +#else + ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn)); +#endif + break; + } + } + + ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn)); + break; + + default: + { + register rtx body = PATTERN (insn); + int insn_code_number; + char *template; + rtx note; + + /* An INSN, JUMP_INSN or CALL_INSN. + First check for special kinds that recog doesn't recognize. */ + + if (GET_CODE (body) == USE /* These are just declarations */ + || GET_CODE (body) == CLOBBER) + break; + +#ifdef HAVE_cc0 + /* If there is a REG_CC_SETTER note on this insn, it means that + the setting of the condition code was done in the delay slot + of the insn that branched here. So recover the cc status + from the insn that set it. */ + + note = find_reg_note (insn, REG_CC_SETTER, NULL_RTX); + if (note) + { + NOTICE_UPDATE_CC (PATTERN (XEXP (note, 0)), XEXP (note, 0)); + cc_prev_status = cc_status; + } +#endif + + /* Detect insns that are really jump-tables + and output them as such. */ + + if (GET_CODE (body) == ADDR_VEC || GET_CODE (body) == ADDR_DIFF_VEC) + { + register int vlen, idx; + + if (prescan > 0) + break; + + if (app_on) + { + fprintf (file, ASM_APP_OFF); + app_on = 0; + } + + vlen = XVECLEN (body, GET_CODE (body) == ADDR_DIFF_VEC); + for (idx = 0; idx < vlen; idx++) + { + if (GET_CODE (body) == ADDR_VEC) + { +#ifdef ASM_OUTPUT_ADDR_VEC_ELT + ASM_OUTPUT_ADDR_VEC_ELT + (file, CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 0, idx), 0))); +#else + abort (); +#endif + } + else + { +#ifdef ASM_OUTPUT_ADDR_DIFF_ELT + ASM_OUTPUT_ADDR_DIFF_ELT + (file, + CODE_LABEL_NUMBER (XEXP (XVECEXP (body, 1, idx), 0)), + CODE_LABEL_NUMBER (XEXP (XEXP (body, 0), 0))); +#else + abort (); +#endif + } + } +#ifdef ASM_OUTPUT_CASE_END + ASM_OUTPUT_CASE_END (file, + CODE_LABEL_NUMBER (PREV_INSN (insn)), + insn); +#endif + + function_section (current_function_decl); + + break; + } + + /* Do basic-block profiling when we reach a new block. + Done here to avoid jump tables. */ + if (profile_block_flag && new_block) + add_bb (file); + + if (GET_CODE (body) == ASM_INPUT) + { + /* There's no telling what that did to the condition codes. */ + CC_STATUS_INIT; + if (prescan > 0) + break; + if (! app_on) + { + fprintf (file, ASM_APP_ON); + app_on = 1; + } + fprintf (asm_out_file, "\t%s\n", XSTR (body, 0)); + break; + } + + /* Detect `asm' construct with operands. */ + if (asm_noperands (body) >= 0) + { + int noperands = asm_noperands (body); + rtx *ops = (rtx *) alloca (noperands * sizeof (rtx)); + char *string; + + /* There's no telling what that did to the condition codes. */ + CC_STATUS_INIT; + if (prescan > 0) + break; + + if (! app_on) + { + fprintf (file, ASM_APP_ON); + app_on = 1; + } + + /* Get out the operand values. */ + string = decode_asm_operands (body, ops, NULL_PTR, + NULL_PTR, NULL_PTR); + /* Inhibit aborts on what would otherwise be compiler bugs. */ + insn_noperands = noperands; + this_is_asm_operands = insn; + + /* Output the insn using them. */ + output_asm_insn (string, ops); + this_is_asm_operands = 0; + break; + } + + if (prescan <= 0 && app_on) + { + fprintf (file, ASM_APP_OFF); + app_on = 0; + } + + if (GET_CODE (body) == SEQUENCE) + { + /* A delayed-branch sequence */ + register int i; + rtx next; + + if (prescan > 0) + break; + final_sequence = body; + + /* The first insn in this SEQUENCE might be a JUMP_INSN that will + force the restoration of a comparison that was previously + thought unnecessary. If that happens, cancel this sequence + and cause that insn to be restored. */ + + next = final_scan_insn (XVECEXP (body, 0, 0), file, 0, prescan, 1); + if (next != XVECEXP (body, 0, 1)) + { + final_sequence = 0; + return next; + } + + for (i = 1; i < XVECLEN (body, 0); i++) + { + rtx insn = XVECEXP (body, 0, i); + rtx next = NEXT_INSN (insn); + /* We loop in case any instruction in a delay slot gets + split. */ + do + insn = final_scan_insn (insn, file, 0, prescan, 1); + while (insn != next); + } +#ifdef DBR_OUTPUT_SEQEND + DBR_OUTPUT_SEQEND (file); +#endif + final_sequence = 0; + + /* If the insn requiring the delay slot was a CALL_INSN, the + insns in the delay slot are actually executed before the + called function. Hence we don't preserve any CC-setting + actions in these insns and the CC must be marked as being + clobbered by the function. */ + if (GET_CODE (XVECEXP (body, 0, 0)) == CALL_INSN) + CC_STATUS_INIT; + + /* Following a conditional branch sequence, we have a new basic + block. */ + if (profile_block_flag) + { + rtx insn = XVECEXP (body, 0, 0); + rtx body = PATTERN (insn); + + if ((GET_CODE (insn) == JUMP_INSN && GET_CODE (body) == SET + && GET_CODE (SET_SRC (body)) != LABEL_REF) + || (GET_CODE (insn) == JUMP_INSN + && GET_CODE (body) == PARALLEL + && GET_CODE (XVECEXP (body, 0, 0)) == SET + && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) != LABEL_REF)) + new_block = 1; + } + break; + } + + /* We have a real machine instruction as rtl. */ + + body = PATTERN (insn); + +#ifdef HAVE_cc0 + /* Check for redundant test and compare instructions + (when the condition codes are already set up as desired). + This is done only when optimizing; if not optimizing, + it should be possible for the user to alter a variable + with the debugger in between statements + and the next statement should reexamine the variable + to compute the condition codes. */ + + if (optimize + && GET_CODE (body) == SET + && GET_CODE (SET_DEST (body)) == CC0 + && insn != last_ignored_compare) + { + if (GET_CODE (SET_SRC (body)) == SUBREG) + SET_SRC (body) = alter_subreg (SET_SRC (body)); + else if (GET_CODE (SET_SRC (body)) == COMPARE) + { + if (GET_CODE (XEXP (SET_SRC (body), 0)) == SUBREG) + XEXP (SET_SRC (body), 0) + = alter_subreg (XEXP (SET_SRC (body), 0)); + if (GET_CODE (XEXP (SET_SRC (body), 1)) == SUBREG) + XEXP (SET_SRC (body), 1) + = alter_subreg (XEXP (SET_SRC (body), 1)); + } + if ((cc_status.value1 != 0 + && rtx_equal_p (SET_SRC (body), cc_status.value1)) + || (cc_status.value2 != 0 + && rtx_equal_p (SET_SRC (body), cc_status.value2))) + { + /* Don't delete insn if it has an addressing side-effect. */ + if (! FIND_REG_INC_NOTE (insn, 0) + /* or if anything in it is volatile. */ + && ! volatile_refs_p (PATTERN (insn))) + { + /* We don't really delete the insn; just ignore it. */ + last_ignored_compare = insn; + break; + } + } + } +#endif + + /* Following a conditional branch, we have a new basic block. + But if we are inside a sequence, the new block starts after the + last insn of the sequence. */ + if (profile_block_flag && final_sequence == 0 + && ((GET_CODE (insn) == JUMP_INSN && GET_CODE (body) == SET + && GET_CODE (SET_SRC (body)) != LABEL_REF) + || (GET_CODE (insn) == JUMP_INSN && GET_CODE (body) == PARALLEL + && GET_CODE (XVECEXP (body, 0, 0)) == SET + && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) != LABEL_REF))) + new_block = 1; + +#ifndef STACK_REGS + /* Don't bother outputting obvious no-ops, even without -O. + This optimization is fast and doesn't interfere with debugging. + Don't do this if the insn is in a delay slot, since this + will cause an improper number of delay insns to be written. */ + if (final_sequence == 0 + && prescan >= 0 + && GET_CODE (insn) == INSN && GET_CODE (body) == SET + && GET_CODE (SET_SRC (body)) == REG + && GET_CODE (SET_DEST (body)) == REG + && REGNO (SET_SRC (body)) == REGNO (SET_DEST (body))) + break; +#endif + +#ifdef HAVE_cc0 + /* If this is a conditional branch, maybe modify it + if the cc's are in a nonstandard state + so that it accomplishes the same thing that it would + do straightforwardly if the cc's were set up normally. */ + + if (cc_status.flags != 0 + && GET_CODE (insn) == JUMP_INSN + && GET_CODE (body) == SET + && SET_DEST (body) == pc_rtx + && GET_CODE (SET_SRC (body)) == IF_THEN_ELSE + && GET_RTX_CLASS (GET_CODE (XEXP (SET_SRC (body), 0))) == '<' + && XEXP (XEXP (SET_SRC (body), 0), 0) == cc0_rtx + /* This is done during prescan; it is not done again + in final scan when prescan has been done. */ + && prescan >= 0) + { + /* This function may alter the contents of its argument + and clear some of the cc_status.flags bits. + It may also return 1 meaning condition now always true + or -1 meaning condition now always false + or 2 meaning condition nontrivial but altered. */ + register int result = alter_cond (XEXP (SET_SRC (body), 0)); + /* If condition now has fixed value, replace the IF_THEN_ELSE + with its then-operand or its else-operand. */ + if (result == 1) + SET_SRC (body) = XEXP (SET_SRC (body), 1); + if (result == -1) + SET_SRC (body) = XEXP (SET_SRC (body), 2); + + /* The jump is now either unconditional or a no-op. + If it has become a no-op, don't try to output it. + (It would not be recognized.) */ + if (SET_SRC (body) == pc_rtx) + { + PUT_CODE (insn, NOTE); + NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED; + NOTE_SOURCE_FILE (insn) = 0; + break; + } + else if (GET_CODE (SET_SRC (body)) == RETURN) + /* Replace (set (pc) (return)) with (return). */ + PATTERN (insn) = body = SET_SRC (body); + + /* Rerecognize the instruction if it has changed. */ + if (result != 0) + INSN_CODE (insn) = -1; + } + + /* Make same adjustments to instructions that examine the + condition codes without jumping (if this machine has them). */ + + if (cc_status.flags != 0 + && GET_CODE (body) == SET) + { + switch (GET_CODE (SET_SRC (body))) + { + case GTU: + case GT: + case LTU: + case LT: + case GEU: + case GE: + case LEU: + case LE: + case EQ: + case NE: + { + register int result; + if (XEXP (SET_SRC (body), 0) != cc0_rtx) + break; + result = alter_cond (SET_SRC (body)); + if (result == 1) + validate_change (insn, &SET_SRC (body), const_true_rtx, 0); + else if (result == -1) + validate_change (insn, &SET_SRC (body), const0_rtx, 0); + else if (result == 2) + INSN_CODE (insn) = -1; + } + } + } +#endif + + /* Do machine-specific peephole optimizations if desired. */ + + if (optimize && !flag_no_peephole && !nopeepholes) + { + rtx next = peephole (insn); + /* When peepholing, if there were notes within the peephole, + emit them before the peephole. */ + if (next != 0 && next != NEXT_INSN (insn)) + { + rtx prev = PREV_INSN (insn); + rtx note; + + for (note = NEXT_INSN (insn); note != next; + note = NEXT_INSN (note)) + final_scan_insn (note, file, optimize, prescan, nopeepholes); + + /* In case this is prescan, put the notes + in proper position for later rescan. */ + note = NEXT_INSN (insn); + PREV_INSN (note) = prev; + NEXT_INSN (prev) = note; + NEXT_INSN (PREV_INSN (next)) = insn; + PREV_INSN (insn) = PREV_INSN (next); + NEXT_INSN (insn) = next; + PREV_INSN (next) = insn; + } + + /* PEEPHOLE might have changed this. */ + body = PATTERN (insn); + } + + /* Try to recognize the instruction. + If successful, verify that the operands satisfy the + constraints for the instruction. Crash if they don't, + since `reload' should have changed them so that they do. */ + + insn_code_number = recog_memoized (insn); + insn_extract (insn); + for (i = 0; i < insn_n_operands[insn_code_number]; i++) + { + if (GET_CODE (recog_operand[i]) == SUBREG) + recog_operand[i] = alter_subreg (recog_operand[i]); + else if (GET_CODE (recog_operand[i]) == PLUS + || GET_CODE (recog_operand[i]) == MULT) + recog_operand[i] = walk_alter_subreg (recog_operand[i]); + } + + for (i = 0; i < insn_n_dups[insn_code_number]; i++) + { + if (GET_CODE (*recog_dup_loc[i]) == SUBREG) + *recog_dup_loc[i] = alter_subreg (*recog_dup_loc[i]); + else if (GET_CODE (*recog_dup_loc[i]) == PLUS + || GET_CODE (*recog_dup_loc[i]) == MULT) + *recog_dup_loc[i] = walk_alter_subreg (*recog_dup_loc[i]); + } + +#ifdef REGISTER_CONSTRAINTS + if (! constrain_operands (insn_code_number, 1)) + fatal_insn_not_found (insn); +#endif + + /* Some target machines need to prescan each insn before + it is output. */ + +#ifdef FINAL_PRESCAN_INSN + FINAL_PRESCAN_INSN (insn, recog_operand, + insn_n_operands[insn_code_number]); +#endif + +#ifdef HAVE_cc0 + cc_prev_status = cc_status; + + /* Update `cc_status' for this instruction. + The instruction's output routine may change it further. + If the output routine for a jump insn needs to depend + on the cc status, it should look at cc_prev_status. */ + + NOTICE_UPDATE_CC (body, insn); +#endif + + debug_insn = insn; + + /* If the proper template needs to be chosen by some C code, + run that code and get the real template. */ + + template = insn_template[insn_code_number]; + if (template == 0) + { + template = (*insn_outfun[insn_code_number]) (recog_operand, insn); + + /* If the C code returns 0, it means that it is a jump insn + which follows a deleted test insn, and that test insn + needs to be reinserted. */ + if (template == 0) + { + if (prev_nonnote_insn (insn) != last_ignored_compare) + abort (); + new_block = 0; + return prev_nonnote_insn (insn); + } + } + + /* If the template is the string "#", it means that this insn must + be split. */ + if (template[0] == '#' && template[1] == '\0') + { + rtx new = try_split (body, insn, 0); + + /* If we didn't split the insn, go away. */ + if (new == insn && PATTERN (new) == body) + abort (); + + new_block = 0; + return new; + } + + if (prescan > 0) + break; + + /* Output assembler code from the template. */ + + output_asm_insn (template, recog_operand); + +#if 0 + /* It's not at all clear why we did this and doing so interferes + with tests we'd like to do to use REG_WAS_0 notes, so let's try + with this out. */ + + /* Mark this insn as having been output. */ + INSN_DELETED_P (insn) = 1; +#endif + + debug_insn = 0; + } + } + return NEXT_INSN (insn); +} + +/* Output debugging info to the assembler file FILE + based on the NOTE-insn INSN, assumed to be a line number. */ + +static void +output_source_line (file, insn) + FILE *file; + rtx insn; +{ + register char *filename = NOTE_SOURCE_FILE (insn); + + /* Remember filename for basic block profiling. + Filenames are allocated on the permanent obstack + or are passed in ARGV, so we don't have to save + the string. */ + + if (profile_block_flag && last_filename != filename) + bb_file_label_num = add_bb_string (filename, TRUE); + + last_filename = filename; + last_linenum = NOTE_LINE_NUMBER (insn); + high_block_linenum = MAX (last_linenum, high_block_linenum); + high_function_linenum = MAX (last_linenum, high_function_linenum); + + if (write_symbols != NO_DEBUG) + { +#ifdef SDB_DEBUGGING_INFO + if (write_symbols == SDB_DEBUG +#if 0 /* People like having line numbers even in wrong file! */ + /* COFF can't handle multiple source files--lose, lose. */ + && !strcmp (filename, main_input_filename) +#endif + /* COFF relative line numbers must be positive. */ + && last_linenum > sdb_begin_function_line) + { +#ifdef ASM_OUTPUT_SOURCE_LINE + ASM_OUTPUT_SOURCE_LINE (file, last_linenum); +#else + fprintf (file, "\t.ln\t%d\n", + ((sdb_begin_function_line > -1) + ? last_linenum - sdb_begin_function_line : 1)); +#endif + } +#endif + +#if defined (DBX_DEBUGGING_INFO) + if (write_symbols == DBX_DEBUG) + dbxout_source_line (file, filename, NOTE_LINE_NUMBER (insn)); +#endif + +#if defined (XCOFF_DEBUGGING_INFO) + if (write_symbols == XCOFF_DEBUG) + xcoffout_source_line (file, filename, insn); +#endif + +#ifdef DWARF_DEBUGGING_INFO + if (write_symbols == DWARF_DEBUG) + dwarfout_line (filename, NOTE_LINE_NUMBER (insn)); +#endif + } +} + +/* If X is a SUBREG, replace it with a REG or a MEM, + based on the thing it is a subreg of. */ + +rtx +alter_subreg (x) + register rtx x; +{ + register rtx y = SUBREG_REG (x); + if (GET_CODE (y) == SUBREG) + y = alter_subreg (y); + + if (GET_CODE (y) == REG) + { + /* If the containing reg really gets a hard reg, so do we. */ + PUT_CODE (x, REG); + REGNO (x) = REGNO (y) + SUBREG_WORD (x); + } + else if (GET_CODE (y) == MEM) + { + register int offset = SUBREG_WORD (x) * UNITS_PER_WORD; + if (BYTES_BIG_ENDIAN) + offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x))) + - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (y)))); + PUT_CODE (x, MEM); + MEM_VOLATILE_P (x) = MEM_VOLATILE_P (y); + XEXP (x, 0) = plus_constant (XEXP (y, 0), offset); + } + + return x; +} + +/* Do alter_subreg on all the SUBREGs contained in X. */ + +static rtx +walk_alter_subreg (x) + rtx x; +{ + switch (GET_CODE (x)) + { + case PLUS: + case MULT: + XEXP (x, 0) = walk_alter_subreg (XEXP (x, 0)); + XEXP (x, 1) = walk_alter_subreg (XEXP (x, 1)); + break; + + case MEM: + XEXP (x, 0) = walk_alter_subreg (XEXP (x, 0)); + break; + + case SUBREG: + return alter_subreg (x); + } + + return x; +} + +#ifdef HAVE_cc0 + +/* Given BODY, the body of a jump instruction, alter the jump condition + as required by the bits that are set in cc_status.flags. + Not all of the bits there can be handled at this level in all cases. + + The value is normally 0. + 1 means that the condition has become always true. + -1 means that the condition has become always false. + 2 means that COND has been altered. */ + +static int +alter_cond (cond) + register rtx cond; +{ + int value = 0; + + if (cc_status.flags & CC_REVERSED) + { + value = 2; + PUT_CODE (cond, swap_condition (GET_CODE (cond))); + } + + if (cc_status.flags & CC_INVERTED) + { + value = 2; + PUT_CODE (cond, reverse_condition (GET_CODE (cond))); + } + + if (cc_status.flags & CC_NOT_POSITIVE) + switch (GET_CODE (cond)) + { + case LE: + case LEU: + case GEU: + /* Jump becomes unconditional. */ + return 1; + + case GT: + case GTU: + case LTU: + /* Jump becomes no-op. */ + return -1; + + case GE: + PUT_CODE (cond, EQ); + value = 2; + break; + + case LT: + PUT_CODE (cond, NE); + value = 2; + break; + } + + if (cc_status.flags & CC_NOT_NEGATIVE) + switch (GET_CODE (cond)) + { + case GE: + case GEU: + /* Jump becomes unconditional. */ + return 1; + + case LT: + case LTU: + /* Jump becomes no-op. */ + return -1; + + case LE: + case LEU: + PUT_CODE (cond, EQ); + value = 2; + break; + + case GT: + case GTU: + PUT_CODE (cond, NE); + value = 2; + break; + } + + if (cc_status.flags & CC_NO_OVERFLOW) + switch (GET_CODE (cond)) + { + case GEU: + /* Jump becomes unconditional. */ + return 1; + + case LEU: + PUT_CODE (cond, EQ); + value = 2; + break; + + case GTU: + PUT_CODE (cond, NE); + value = 2; + break; + + case LTU: + /* Jump becomes no-op. */ + return -1; + } + + if (cc_status.flags & (CC_Z_IN_NOT_N | CC_Z_IN_N)) + switch (GET_CODE (cond)) + { + case LE: + case LEU: + case GE: + case GEU: + case LT: + case LTU: + case GT: + case GTU: + abort (); + + case NE: + PUT_CODE (cond, cc_status.flags & CC_Z_IN_N ? GE : LT); + value = 2; + break; + + case EQ: + PUT_CODE (cond, cc_status.flags & CC_Z_IN_N ? LT : GE); + value = 2; + break; + } + + if (cc_status.flags & CC_NOT_SIGNED) + /* The flags are valid if signed condition operators are converted + to unsigned. */ + switch (GET_CODE (cond)) + { + case LE: + PUT_CODE (cond, LEU); + value = 2; + break; + + case LT: + PUT_CODE (cond, LTU); + value = 2; + break; + + case GT: + PUT_CODE (cond, GTU); + value = 2; + break; + + case GE: + PUT_CODE (cond, GEU); + value = 2; + break; + } + + return value; +} +#endif + +/* Report inconsistency between the assembler template and the operands. + In an `asm', it's the user's fault; otherwise, the compiler's fault. */ + +void +output_operand_lossage (str) + char *str; +{ + if (this_is_asm_operands) + error_for_asm (this_is_asm_operands, "invalid `asm': %s", str); + else + abort (); +} + +/* Output of assembler code from a template, and its subroutines. */ + +/* Output text from TEMPLATE to the assembler output file, + obeying %-directions to substitute operands taken from + the vector OPERANDS. + + %N (for N a digit) means print operand N in usual manner. + %lN means require operand N to be a CODE_LABEL or LABEL_REF + and print the label name with no punctuation. + %cN means require operand N to be a constant + and print the constant expression with no punctuation. + %aN means expect operand N to be a memory address + (not a memory reference!) and print a reference + to that address. + %nN means expect operand N to be a constant + and print a constant expression for minus the value + of the operand, with no other punctuation. */ + +static void +output_asm_name () +{ + if (flag_print_asm_name) + { + /* Annotate the assembly with a comment describing the pattern and + alternative used. */ + if (debug_insn) + { + register int num = INSN_CODE (debug_insn); + fprintf (asm_out_file, " %s %d %s", + ASM_COMMENT_START, INSN_UID (debug_insn), insn_name[num]); + if (insn_n_alternatives[num] > 1) + fprintf (asm_out_file, "/%d", which_alternative + 1); + + /* Clear this so only the first assembler insn + of any rtl insn will get the special comment for -dp. */ + debug_insn = 0; + } + } +} + +void +output_asm_insn (template, operands) + char *template; + rtx *operands; +{ + register char *p; + register int c, i; + + /* An insn may return a null string template + in a case where no assembler code is needed. */ + if (*template == 0) + return; + + p = template; + putc ('\t', asm_out_file); + +#ifdef ASM_OUTPUT_OPCODE + ASM_OUTPUT_OPCODE (asm_out_file, p); +#endif + + while (c = *p++) + switch (c) + { + case '\n': + output_asm_name (); + putc (c, asm_out_file); +#ifdef ASM_OUTPUT_OPCODE + while ((c = *p) == '\t') + { + putc (c, asm_out_file); + p++; + } + ASM_OUTPUT_OPCODE (asm_out_file, p); +#endif + break; + +#ifdef ASSEMBLER_DIALECT + case '{': + /* If we want the first dialect, do nothing. Otherwise, skip + DIALECT_NUMBER of strings ending with '|'. */ + for (i = 0; i < dialect_number; i++) + { + while (*p && *p++ != '|') + ; + + if (*p == '|') + p++; + } + break; + + case '|': + /* Skip to close brace. */ + while (*p && *p++ != '}') + ; + break; + + case '}': + break; +#endif + + case '%': + /* %% outputs a single %. */ + if (*p == '%') + { + p++; + putc (c, asm_out_file); + } + /* %= outputs a number which is unique to each insn in the entire + compilation. This is useful for making local labels that are + referred to more than once in a given insn. */ + else if (*p == '=') + { + p++; + fprintf (asm_out_file, "%d", insn_counter); + } + /* % followed by a letter and some digits + outputs an operand in a special way depending on the letter. + Letters `acln' are implemented directly. + Other letters are passed to `output_operand' so that + the PRINT_OPERAND macro can define them. */ + else if ((*p >= 'a' && *p <= 'z') + || (*p >= 'A' && *p <= 'Z')) + { + int letter = *p++; + c = atoi (p); + + if (! (*p >= '0' && *p <= '9')) + output_operand_lossage ("operand number missing after %-letter"); + else if (this_is_asm_operands && c >= (unsigned) insn_noperands) + output_operand_lossage ("operand number out of range"); + else if (letter == 'l') + output_asm_label (operands[c]); + else if (letter == 'a') + output_address (operands[c]); + else if (letter == 'c') + { + if (CONSTANT_ADDRESS_P (operands[c])) + output_addr_const (asm_out_file, operands[c]); + else + output_operand (operands[c], 'c'); + } + else if (letter == 'n') + { + if (GET_CODE (operands[c]) == CONST_INT) + fprintf (asm_out_file, +#if HOST_BITS_PER_WIDE_INT == HOST_BITS_PER_INT + "%d", +#else + "%ld", +#endif + - INTVAL (operands[c])); + else + { + putc ('-', asm_out_file); + output_addr_const (asm_out_file, operands[c]); + } + } + else + output_operand (operands[c], letter); + + while ((c = *p) >= '0' && c <= '9') p++; + } + /* % followed by a digit outputs an operand the default way. */ + else if (*p >= '0' && *p <= '9') + { + c = atoi (p); + if (this_is_asm_operands && c >= (unsigned) insn_noperands) + output_operand_lossage ("operand number out of range"); + else + output_operand (operands[c], 0); + while ((c = *p) >= '0' && c <= '9') p++; + } + /* % followed by punctuation: output something for that + punctuation character alone, with no operand. + The PRINT_OPERAND macro decides what is actually done. */ +#ifdef PRINT_OPERAND_PUNCT_VALID_P + else if (PRINT_OPERAND_PUNCT_VALID_P (*p)) + output_operand (NULL_RTX, *p++); +#endif + else + output_operand_lossage ("invalid %%-code"); + break; + + default: + putc (c, asm_out_file); + } + + output_asm_name (); + + putc ('\n', asm_out_file); +} + +/* Output a LABEL_REF, or a bare CODE_LABEL, as an assembler symbol. */ + +void +output_asm_label (x) + rtx x; +{ + char buf[256]; + + if (GET_CODE (x) == LABEL_REF) + ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (XEXP (x, 0))); + else if (GET_CODE (x) == CODE_LABEL) + ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (x)); + else + output_operand_lossage ("`%l' operand isn't a label"); + + assemble_name (asm_out_file, buf); +} + +/* Print operand X using machine-dependent assembler syntax. + The macro PRINT_OPERAND is defined just to control this function. + CODE is a non-digit that preceded the operand-number in the % spec, + such as 'z' if the spec was `%z3'. CODE is 0 if there was no char + between the % and the digits. + When CODE is a non-letter, X is 0. + + The meanings of the letters are machine-dependent and controlled + by PRINT_OPERAND. */ + +static void +output_operand (x, code) + rtx x; + int code; +{ + if (x && GET_CODE (x) == SUBREG) + x = alter_subreg (x); + + /* If X is a pseudo-register, abort now rather than writing trash to the + assembler file. */ + + if (x && GET_CODE (x) == REG && REGNO (x) >= FIRST_PSEUDO_REGISTER) + abort (); + + PRINT_OPERAND (asm_out_file, x, code); +} + +/* Print a memory reference operand for address X + using machine-dependent assembler syntax. + The macro PRINT_OPERAND_ADDRESS exists just to control this function. */ + +void +output_address (x) + rtx x; +{ + walk_alter_subreg (x); + PRINT_OPERAND_ADDRESS (asm_out_file, x); +} + +/* Print an integer constant expression in assembler syntax. + Addition and subtraction are the only arithmetic + that may appear in these expressions. */ + +void +output_addr_const (file, x) + FILE *file; + rtx x; +{ + char buf[256]; + + restart: + switch (GET_CODE (x)) + { + case PC: + if (flag_pic) + putc ('.', file); + else + abort (); + break; + + case SYMBOL_REF: + assemble_name (file, XSTR (x, 0)); + break; + + case LABEL_REF: + ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (XEXP (x, 0))); + assemble_name (file, buf); + break; + + case CODE_LABEL: + ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (x)); + assemble_name (file, buf); + break; + + case CONST_INT: + fprintf (file, +#if HOST_BITS_PER_WIDE_INT == HOST_BITS_PER_INT + "%d", +#else + "%ld", +#endif + INTVAL (x)); + break; + + case CONST: + /* This used to output parentheses around the expression, + but that does not work on the 386 (either ATT or BSD assembler). */ + output_addr_const (file, XEXP (x, 0)); + break; + + case CONST_DOUBLE: + if (GET_MODE (x) == VOIDmode) + { + /* We can use %d if the number is one word and positive. */ + if (CONST_DOUBLE_HIGH (x)) + fprintf (file, +#if HOST_BITS_PER_WIDE_INT == 64 +#if HOST_BITS_PER_WIDE_INT != HOST_BITS_PER_INT + "0x%lx%016lx", +#else + "0x%x%016x", +#endif +#else +#if HOST_BITS_PER_WIDE_INT != HOST_BITS_PER_INT + "0x%lx%08lx", +#else + "0x%x%08x", +#endif +#endif + CONST_DOUBLE_HIGH (x), CONST_DOUBLE_LOW (x)); + else if (CONST_DOUBLE_LOW (x) < 0) + fprintf (file, +#if HOST_BITS_PER_WIDE_INT == HOST_BITS_PER_INT + "0x%x", +#else + "0x%lx", +#endif + CONST_DOUBLE_LOW (x)); + else + fprintf (file, +#if HOST_BITS_PER_WIDE_INT == HOST_BITS_PER_INT + "%d", +#else + "%ld", +#endif + CONST_DOUBLE_LOW (x)); + } + else + /* We can't handle floating point constants; + PRINT_OPERAND must handle them. */ + output_operand_lossage ("floating constant misused"); + break; + + case PLUS: + /* Some assemblers need integer constants to appear last (eg masm). */ + if (GET_CODE (XEXP (x, 0)) == CONST_INT) + { + output_addr_const (file, XEXP (x, 1)); + if (INTVAL (XEXP (x, 0)) >= 0) + fprintf (file, "+"); + output_addr_const (file, XEXP (x, 0)); + } + else + { + output_addr_const (file, XEXP (x, 0)); + if (INTVAL (XEXP (x, 1)) >= 0) + fprintf (file, "+"); + output_addr_const (file, XEXP (x, 1)); + } + break; + + case MINUS: + /* Avoid outputting things like x-x or x+5-x, + since some assemblers can't handle that. */ + x = simplify_subtraction (x); + if (GET_CODE (x) != MINUS) + goto restart; + + output_addr_const (file, XEXP (x, 0)); + fprintf (file, "-"); + if (GET_CODE (XEXP (x, 1)) == CONST_INT + && INTVAL (XEXP (x, 1)) < 0) + { + fprintf (file, ASM_OPEN_PAREN); + output_addr_const (file, XEXP (x, 1)); + fprintf (file, ASM_CLOSE_PAREN); + } + else + output_addr_const (file, XEXP (x, 1)); + break; + + case ZERO_EXTEND: + case SIGN_EXTEND: + output_addr_const (file, XEXP (x, 0)); + break; + + default: + output_operand_lossage ("invalid expression as operand"); + } +} + +/* A poor man's fprintf, with the added features of %I, %R, %L, and %U. + %R prints the value of REGISTER_PREFIX. + %L prints the value of LOCAL_LABEL_PREFIX. + %U prints the value of USER_LABEL_PREFIX. + %I prints the value of IMMEDIATE_PREFIX. + %O runs ASM_OUTPUT_OPCODE to transform what follows in the string. + Also supported are %d, %x, %s, %e, %f, %g and %%. + + We handle alternate assembler dialects here, just like output_asm_insn. */ + +void +asm_fprintf VPROTO((FILE *file, char *p, ...)) +{ +#ifndef __STDC__ + FILE *file; + char *p; +#endif + va_list argptr; + char buf[10]; + char *q, c; + int i; + + VA_START (argptr, p); + +#ifndef __STDC__ + file = va_arg (argptr, FILE*); + p = va_arg (argptr, char*); +#endif + + buf[0] = '%'; + + while (c = *p++) + switch (c) + { +#ifdef ASSEMBLER_DIALECT + case '{': + /* If we want the first dialect, do nothing. Otherwise, skip + DIALECT_NUMBER of strings ending with '|'. */ + for (i = 0; i < dialect_number; i++) + { + while (*p && *p++ != '|') + ; + + if (*p == '|') + p++; + } + break; + + case '|': + /* Skip to close brace. */ + while (*p && *p++ != '}') + ; + break; + + case '}': + break; +#endif + + case '%': + c = *p++; + q = &buf[1]; + while ((c >= '0' && c <= '9') || c == '.') + { + *q++ = c; + c = *p++; + } + switch (c) + { + case '%': + fprintf (file, "%%"); + break; + + case 'd': case 'i': case 'u': + case 'x': case 'p': case 'X': + case 'o': + *q++ = c; + *q = 0; + fprintf (file, buf, va_arg (argptr, int)); + break; + + case 'w': + /* This is a prefix to the 'd', 'i', 'u', 'x', 'p', and 'X' cases, + but we do not check for those cases. It means that the value + is a HOST_WIDE_INT, which may be either `int' or `long'. */ + +#if HOST_BITS_PER_WIDE_INT != HOST_BITS_PER_INT + *q++ = 'l'; +#endif + + *q++ = *p++; + *q = 0; + fprintf (file, buf, va_arg (argptr, HOST_WIDE_INT)); + break; + + case 'l': + *q++ = c; + *q++ = *p++; + *q = 0; + fprintf (file, buf, va_arg (argptr, long)); + break; + + case 'e': + case 'f': + case 'g': + *q++ = c; + *q = 0; + fprintf (file, buf, va_arg (argptr, double)); + break; + + case 's': + *q++ = c; + *q = 0; + fprintf (file, buf, va_arg (argptr, char *)); + break; + + case 'O': +#ifdef ASM_OUTPUT_OPCODE + ASM_OUTPUT_OPCODE (asm_out_file, p); +#endif + break; + + case 'R': +#ifdef REGISTER_PREFIX + fprintf (file, "%s", REGISTER_PREFIX); +#endif + break; + + case 'I': +#ifdef IMMEDIATE_PREFIX + fprintf (file, "%s", IMMEDIATE_PREFIX); +#endif + break; + + case 'L': +#ifdef LOCAL_LABEL_PREFIX + fprintf (file, "%s", LOCAL_LABEL_PREFIX); +#endif + break; + + case 'U': +#ifdef USER_LABEL_PREFIX + fprintf (file, "%s", USER_LABEL_PREFIX); +#endif + break; + + default: + abort (); + } + break; + + default: + fputc (c, file); + } +} + +/* Split up a CONST_DOUBLE or integer constant rtx + into two rtx's for single words, + storing in *FIRST the word that comes first in memory in the target + and in *SECOND the other. */ + +void +split_double (value, first, second) + rtx value; + rtx *first, *second; +{ + if (GET_CODE (value) == CONST_INT) + { + if (HOST_BITS_PER_WIDE_INT >= (2 * BITS_PER_WORD)) + { + /* In this case the CONST_INT holds both target words. + Extract the bits from it into two word-sized pieces. */ + rtx low, high; + HOST_WIDE_INT word_mask; + /* Avoid warnings for shift count >= BITS_PER_WORD. */ + int shift_count = BITS_PER_WORD - 1; + + word_mask = (HOST_WIDE_INT) 1 << shift_count; + word_mask |= word_mask - 1; + low = GEN_INT (INTVAL (value) & word_mask); + high = GEN_INT ((INTVAL (value) >> (shift_count + 1)) & word_mask); + if (WORDS_BIG_ENDIAN) + { + *first = high; + *second = low; + } + else + { + *first = low; + *second = high; + } + } + else + { + /* The rule for using CONST_INT for a wider mode + is that we regard the value as signed. + So sign-extend it. */ + rtx high = (INTVAL (value) < 0 ? constm1_rtx : const0_rtx); + if (WORDS_BIG_ENDIAN) + { + *first = high; + *second = value; + } + else + { + *first = value; + *second = high; + } + } + } + else if (GET_CODE (value) != CONST_DOUBLE) + { + if (WORDS_BIG_ENDIAN) + { + *first = const0_rtx; + *second = value; + } + else + { + *first = value; + *second = const0_rtx; + } + } + else if (GET_MODE (value) == VOIDmode + /* This is the old way we did CONST_DOUBLE integers. */ + || GET_MODE_CLASS (GET_MODE (value)) == MODE_INT) + { + /* In an integer, the words are defined as most and least significant. + So order them by the target's convention. */ + if (WORDS_BIG_ENDIAN) + { + *first = GEN_INT (CONST_DOUBLE_HIGH (value)); + *second = GEN_INT (CONST_DOUBLE_LOW (value)); + } + else + { + *first = GEN_INT (CONST_DOUBLE_LOW (value)); + *second = GEN_INT (CONST_DOUBLE_HIGH (value)); + } + } + else + { +#ifdef REAL_ARITHMETIC + REAL_VALUE_TYPE r; long l[2]; + REAL_VALUE_FROM_CONST_DOUBLE (r, value); + + /* Note, this converts the REAL_VALUE_TYPE to the target's + format, splits up the floating point double and outputs + exactly 32 bits of it into each of l[0] and l[1] -- + not necessarily BITS_PER_WORD bits. */ + REAL_VALUE_TO_TARGET_DOUBLE (r, l); + + *first = GEN_INT ((HOST_WIDE_INT) l[0]); + *second = GEN_INT ((HOST_WIDE_INT) l[1]); +#else + if ((HOST_FLOAT_FORMAT != TARGET_FLOAT_FORMAT + || HOST_BITS_PER_WIDE_INT != BITS_PER_WORD) + && ! flag_pretend_float) + abort (); + + if ( +#ifdef HOST_WORDS_BIG_ENDIAN + WORDS_BIG_ENDIAN +#else + ! WORDS_BIG_ENDIAN +#endif + ) + { + /* Host and target agree => no need to swap. */ + *first = GEN_INT (CONST_DOUBLE_LOW (value)); + *second = GEN_INT (CONST_DOUBLE_HIGH (value)); + } + else + { + *second = GEN_INT (CONST_DOUBLE_LOW (value)); + *first = GEN_INT (CONST_DOUBLE_HIGH (value)); + } +#endif /* no REAL_ARITHMETIC */ + } +} + +/* Return nonzero if this function has no function calls. */ + +int +leaf_function_p () +{ + rtx insn; + + if (profile_flag || profile_block_flag) + return 0; + + for (insn = get_insns (); insn; insn = NEXT_INSN (insn)) + { + if (GET_CODE (insn) == CALL_INSN) + return 0; + if (GET_CODE (insn) == INSN + && GET_CODE (PATTERN (insn)) == SEQUENCE + && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == CALL_INSN) + return 0; + } + for (insn = current_function_epilogue_delay_list; insn; insn = XEXP (insn, 1)) + { + if (GET_CODE (XEXP (insn, 0)) == CALL_INSN) + return 0; + if (GET_CODE (XEXP (insn, 0)) == INSN + && GET_CODE (PATTERN (XEXP (insn, 0))) == SEQUENCE + && GET_CODE (XVECEXP (PATTERN (XEXP (insn, 0)), 0, 0)) == CALL_INSN) + return 0; + } + + return 1; +} + +/* On some machines, a function with no call insns + can run faster if it doesn't create its own register window. + When output, the leaf function should use only the "output" + registers. Ordinarily, the function would be compiled to use + the "input" registers to find its arguments; it is a candidate + for leaf treatment if it uses only the "input" registers. + Leaf function treatment means renumbering so the function + uses the "output" registers instead. */ + +#ifdef LEAF_REGISTERS + +static char permitted_reg_in_leaf_functions[] = LEAF_REGISTERS; + +/* Return 1 if this function uses only the registers that can be + safely renumbered. */ + +int +only_leaf_regs_used () +{ + int i; + + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + { + if ((regs_ever_live[i] || global_regs[i]) + && ! permitted_reg_in_leaf_functions[i]) + return 0; + } + return 1; +} + +/* Scan all instructions and renumber all registers into those + available in leaf functions. */ + +static void +leaf_renumber_regs (first) + rtx first; +{ + rtx insn; + + /* Renumber only the actual patterns. + The reg-notes can contain frame pointer refs, + and renumbering them could crash, and should not be needed. */ + for (insn = first; insn; insn = NEXT_INSN (insn)) + if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + leaf_renumber_regs_insn (PATTERN (insn)); + for (insn = current_function_epilogue_delay_list; insn; insn = XEXP (insn, 1)) + if (GET_RTX_CLASS (GET_CODE (XEXP (insn, 0))) == 'i') + leaf_renumber_regs_insn (PATTERN (XEXP (insn, 0))); +} + +/* Scan IN_RTX and its subexpressions, and renumber all regs into those + available in leaf functions. */ + +void +leaf_renumber_regs_insn (in_rtx) + register rtx in_rtx; +{ + register int i, j; + register char *format_ptr; + + if (in_rtx == 0) + return; + + /* Renumber all input-registers into output-registers. + renumbered_regs would be 1 for an output-register; + they */ + + if (GET_CODE (in_rtx) == REG) + { + int newreg; + + /* Don't renumber the same reg twice. */ + if (in_rtx->used) + return; + + newreg = REGNO (in_rtx); + /* Don't try to renumber pseudo regs. It is possible for a pseudo reg + to reach here as part of a REG_NOTE. */ + if (newreg >= FIRST_PSEUDO_REGISTER) + { + in_rtx->used = 1; + return; + } + newreg = LEAF_REG_REMAP (newreg); + if (newreg < 0) + abort (); + regs_ever_live[REGNO (in_rtx)] = 0; + regs_ever_live[newreg] = 1; + REGNO (in_rtx) = newreg; + in_rtx->used = 1; + } + + if (GET_RTX_CLASS (GET_CODE (in_rtx)) == 'i') + { + /* Inside a SEQUENCE, we find insns. + Renumber just the patterns of these insns, + just as we do for the top-level insns. */ + leaf_renumber_regs_insn (PATTERN (in_rtx)); + return; + } + + format_ptr = GET_RTX_FORMAT (GET_CODE (in_rtx)); + + for (i = 0; i < GET_RTX_LENGTH (GET_CODE (in_rtx)); i++) + switch (*format_ptr++) + { + case 'e': + leaf_renumber_regs_insn (XEXP (in_rtx, i)); + break; + + case 'E': + if (NULL != XVEC (in_rtx, i)) + { + for (j = 0; j < XVECLEN (in_rtx, i); j++) + leaf_renumber_regs_insn (XVECEXP (in_rtx, i, j)); + } + break; + + case 'S': + case 's': + case '0': + case 'i': + case 'w': + case 'n': + case 'u': + break; + + default: + abort (); + } +} +#endif -- cgit v1.1