From 2a9ea95d682586d2b0c31da28d82a73d786c7c0a Mon Sep 17 00:00:00 2001 From: obrien Date: Fri, 12 May 2000 23:15:20 +0000 Subject: Import of Binutils 2.10 snapshot. --- contrib/binutils/bfd/doc/ChangeLog | 33 + contrib/binutils/bfd/doc/Makefile.am | 4 +- contrib/binutils/bfd/doc/Makefile.in | 193 ++-- contrib/binutils/bfd/doc/bfd.texinfo | 4 +- contrib/binutils/bfd/doc/bfdint.texi | 1885 ++++++++++++++++++++++++++++++++++ 5 files changed, 2051 insertions(+), 68 deletions(-) create mode 100644 contrib/binutils/bfd/doc/bfdint.texi (limited to 'contrib/binutils/bfd/doc') diff --git a/contrib/binutils/bfd/doc/ChangeLog b/contrib/binutils/bfd/doc/ChangeLog index 871299c..def932c 100644 --- a/contrib/binutils/bfd/doc/ChangeLog +++ b/contrib/binutils/bfd/doc/ChangeLog @@ -1,3 +1,36 @@ +2000-04-30 Ben Elliston + + * bfdint.texi (BFD generated files): Fix another typo. + +2000-04-17 Ben Elliston + + * bfdint.texi (BFD_JUMP_TABLE macros): Fix typo. + +Thu Feb 4 23:21:36 1999 Ian Lance Taylor + + * Makefile.in: Rebuild with current autoconf/automake. + +Thu Jul 23 09:36:44 1998 Nick Clifton + + * bfdint.texi (BFD ELF processor required): Add paragraph + describing the necessity to create "include/elf/CPU.h". + +Thu May 7 14:45:43 1998 Ian Lance Taylor + + * Makefile.am (chew.o): Add -I options for intl srcdir and + objdir. + * Makefile.in: Rebuild. + +Mon Apr 27 20:19:24 1998 Ian Lance Taylor + + * bfdint.texi: New file. + * Makefile.am (noinst_TEXINFOS): New variable. + * Makefile.in: Rebuild. + +Mon Apr 13 16:48:56 1998 Ian Lance Taylor + + * Makefile.in: Rebuild. + Mon Apr 6 14:06:55 1998 Ian Lance Taylor * Makefile.am (STAGESTUFF): Remove variable. diff --git a/contrib/binutils/bfd/doc/Makefile.am b/contrib/binutils/bfd/doc/Makefile.am index 7588273..0d5268e 100644 --- a/contrib/binutils/bfd/doc/Makefile.am +++ b/contrib/binutils/bfd/doc/Makefile.am @@ -51,7 +51,7 @@ $(MKDOC): chew.o $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(LOADLIBES) $(LDFLAGS) chew.o: chew.c - $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c + $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c protos: libbfd.h libcoff.h bfd.h @@ -239,6 +239,8 @@ bfd.h: $(srcdir)/../bfd-in.h \ echo "#endif" >>bfd.h echo "#endif" >>bfd.h +noinst_TEXINFOS = bfdint.texi + MOSTLYCLEANFILES = $(MKDOC) *.o CLEANFILES = s-* *.p *.ip diff --git a/contrib/binutils/bfd/doc/Makefile.in b/contrib/binutils/bfd/doc/Makefile.in index cc1a092..acdc9bf 100644 --- a/contrib/binutils/bfd/doc/Makefile.in +++ b/contrib/binutils/bfd/doc/Makefile.in @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.2e from Makefile.am +# Makefile.in generated automatically by automake 1.4 from Makefile.am -# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -32,6 +32,8 @@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include +DESTDIR = + pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ @@ -44,7 +46,7 @@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ @@ -62,30 +64,52 @@ host_triplet = @host@ target_alias = @target_alias@ target_triplet = @target@ AR = @AR@ +AS = @AS@ BFD_HOST_64BIT_LONG = @BFD_HOST_64BIT_LONG@ BFD_HOST_64_BIT = @BFD_HOST_64_BIT@ BFD_HOST_64_BIT_DEFINED = @BFD_HOST_64_BIT_DEFINED@ BFD_HOST_U_64_BIT = @BFD_HOST_U_64_BIT@ +CATALOGS = @CATALOGS@ +CATOBJEXT = @CATOBJEXT@ CC = @CC@ CC_FOR_BUILD = @CC_FOR_BUILD@ COREFILE = @COREFILE@ COREFLAG = @COREFLAG@ +DATADIRNAME = @DATADIRNAME@ +DLLTOOL = @DLLTOOL@ EXEEXT = @EXEEXT@ EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ +GMOFILES = @GMOFILES@ +GMSGFMT = @GMSGFMT@ +GT_NO = @GT_NO@ +GT_YES = @GT_YES@ HDEFINES = @HDEFINES@ -LD = @LD@ +INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +INSTOBJEXT = @INSTOBJEXT@ +INTLDEPS = @INTLDEPS@ +INTLLIBS = @INTLLIBS@ +INTLOBJS = @INTLOBJS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ -NM = @NM@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +OBJDUMP = @OBJDUMP@ PACKAGE = @PACKAGE@ +POFILES = @POFILES@ +POSUB = @POSUB@ RANLIB = @RANLIB@ TDEFINES = @TDEFINES@ +USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ +USE_NLS = @USE_NLS@ VERSION = @VERSION@ +WIN32LDFLAGS = @WIN32LDFLAGS@ +WIN32LIBADD = @WIN32LIBADD@ all_backends = @all_backends@ bfd_backends = @bfd_backends@ bfd_machines = @bfd_machines@ +l = @l@ tdefaults = @tdefaults@ wordsize = @wordsize@ @@ -97,12 +121,14 @@ DOCFILES = aoutx.texi archive.texi archures.texi \ opncls.texi reloc.texi section.texi \ syms.texi targets.texi init.texi hash.texi linker.texi + PROTOS = archive.p archures.p bfd.p \ core.p format.p \ libbfd.p opncls.p reloc.p \ section.p syms.p targets.p \ format.p core.p init.p + IPROTOS = cache.ip libbfd.ip reloc.ip init.ip archures.ip coffcode.ip # SRCDOC, SRCPROT, SRCIPROT only used to sidestep Sun Make bug in interaction @@ -118,6 +144,7 @@ SRCDOC = $(srcdir)/../aoutx.h $(srcdir)/../archive.c \ $(srcdir)/../syms.c $(srcdir)/../targets.c \ $(srcdir)/../hash.c $(srcdir)/../linker.c + SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \ $(srcdir)/../bfd.c $(srcdir)/../coffcode.h $(srcdir)/../corefile.c \ $(srcdir)/../format.c $(srcdir)/../libbfd.c \ @@ -125,17 +152,21 @@ SRCPROT = $(srcdir)/../archive.c $(srcdir)/../archures.c \ $(srcdir)/../section.c $(srcdir)/../syms.c \ $(srcdir)/../targets.c $(srcdir)/../init.c + SRCIPROT = $(srcdir)/../cache.c $(srcdir)/../libbfd.c \ $(srcdir)/../reloc.c $(srcdir)/../cpu-h8300.c \ $(srcdir)/../cpu-i960.c $(srcdir)/../archures.c \ $(srcdir)/../init.c + TEXIDIR = $(srcdir)/../../texinfo/fsf info_TEXINFOS = bfd.texinfo MKDOC = chew$(EXEEXT_FOR_BUILD) +noinst_TEXINFOS = bfdint.texi + MOSTLYCLEANFILES = $(MKDOC) *.o CLEANFILES = s-* *.p *.ip @@ -157,15 +188,14 @@ DIST_COMMON = ChangeLog Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = tar -GZIP = --best -default: all - +GZIP_ENV = --best +all: all-redirect .SUFFIXES: -.SUFFIXES: .dvi .info .ps .texi .texinfo -$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +.SUFFIXES: .dvi .info .ps .texi .texinfo .txi +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --cygnus doc/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status @@ -181,7 +211,7 @@ DVIPS = dvips $(MAKEINFO) -I $(srcdir) $< .texi.dvi: - TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \ + TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< .texi: @@ -197,28 +227,42 @@ DVIPS = dvips $(MAKEINFO) -I $(srcdir) $< .texinfo.dvi: - TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \ + TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< + +.txi.info: + @rm -f $@ $@-[0-9] $@-[0-9][0-9] + $(MAKEINFO) -I $(srcdir) $< + +.txi.dvi: + TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \ + MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< + +.txi: + @rm -f $@ $@-[0-9] $@-[0-9][0-9] + $(MAKEINFO) -I $(srcdir) $< .dvi.ps: $(DVIPS) $< -o $@ install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) - $(mkinstalldirs) $(infodir) - @for file in $(INFO_DEPS); do \ + $(mkinstalldirs) $(DESTDIR)$(infodir) + @list='$(INFO_DEPS)'; \ + for file in $$list; do \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \ if test -f $$d/$$ifile; then \ - echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \ - $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \ + echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \ + $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \ else : ; fi; \ done; \ done @$(POST_INSTALL) @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ - for file in $(INFO_DEPS); do \ - echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\ - install-info --info-dir=$(infodir) $(infodir)/$$file || :;\ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\ + install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\ done; \ else : ; fi @@ -227,17 +271,20 @@ uninstall-info: @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ ii=yes; \ else ii=; fi; \ - for file in $(INFO_DEPS); do \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ test -z "$ii" \ - || install-info --info-dir=$(infodir) --remove $$file; \ + || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \ done - $(NORMAL_UNINSTALL) - for file in $(INFO_DEPS); do \ - (cd $(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \ + @$(NORMAL_UNINSTALL) + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \ done dist-info: $(INFO_DEPS) - for base in $(INFO_DEPS); do \ + list='$(INFO_DEPS)'; \ + for base in $$list; do \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ for file in `cd $$d && eval echo $$base*`; do \ test -f $(distdir)/$$file \ @@ -274,32 +321,40 @@ subdir = doc distdir: $(DISTFILES) @for file in $(DISTFILES); do \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file; \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ done - $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info -info: $(INFO_DEPS) -dvi: $(DVIS) -check: - $(MAKE) -installcheck: + $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info +info-am: $(INFO_DEPS) +info: info-am +dvi-am: $(DVIS) +dvi: dvi-am +check-am: +check: check-am +installcheck-am: +installcheck: installcheck-am +install-info-am: install-info: install-info-am -install-exec: - @$(NORMAL_INSTALL) - -install-data: - @$(NORMAL_INSTALL) - -install: install-exec install-data all - @: - -uninstall: - -all: Makefile - +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile +all-redirect: all-am install-strip: - $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: @@ -310,39 +365,47 @@ clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: - -rm -f Makefile $(DISTCLEANFILES) + -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -mostlyclean: mostlyclean-aminfo mostlyclean-generic +mostlyclean-am: mostlyclean-aminfo mostlyclean-generic + +mostlyclean: mostlyclean-am -clean: clean-aminfo clean-generic mostlyclean +clean-am: clean-aminfo clean-generic mostlyclean-am -distclean: distclean-aminfo distclean-generic clean - -rm -f config.status +clean: clean-am + +distclean-am: distclean-aminfo distclean-generic clean-am -rm -f libtool -maintainer-clean: maintainer-clean-aminfo maintainer-clean-generic \ - distclean +distclean: distclean-am + +maintainer-clean-am: maintainer-clean-aminfo maintainer-clean-generic \ + distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." -.PHONY: default install-info-am uninstall-info mostlyclean-aminfo \ -distclean-aminfo clean-aminfo maintainer-clean-aminfo tags distdir info \ -dvi installcheck install-info install-exec install-data install \ -uninstall all installdirs mostlyclean-generic distclean-generic \ -clean-generic maintainer-clean-generic clean mostlyclean distclean \ -maintainer-clean +maintainer-clean: maintainer-clean-am + +.PHONY: install-info-am uninstall-info mostlyclean-aminfo \ +distclean-aminfo clean-aminfo maintainer-clean-aminfo tags distdir \ +info-am info dvi-am dvi check check-am installcheck-am installcheck \ +install-info-am install-info install-exec-am install-exec \ +install-data-am install-data install-am install uninstall-am uninstall \ +all-redirect all-am all installdirs mostlyclean-generic \ +distclean-generic clean-generic maintainer-clean-generic clean \ +mostlyclean distclean maintainer-clean $(MKDOC): chew.o $(CC_FOR_BUILD) -o $(MKDOC) chew.o $(LOADLIBES) $(LDFLAGS) chew.o: chew.c - $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c + $(CC_FOR_BUILD) -c -I.. -I$(srcdir)/.. -I$(srcdir)/../../include -I$(srcdir)/../../intl -I../../intl $(H_CFLAGS) $(CFLAGS) $(srcdir)/chew.c protos: libbfd.h libcoff.h bfd.h diff --git a/contrib/binutils/bfd/doc/bfd.texinfo b/contrib/binutils/bfd/doc/bfd.texinfo index dc0f96c..a302bcf 100644 --- a/contrib/binutils/bfd/doc/bfd.texinfo +++ b/contrib/binutils/bfd/doc/bfd.texinfo @@ -1,6 +1,6 @@ \input texinfo.tex @setfilename bfd.info -@c $Id: bfd.texinfo,v 1.29 1997/07/22 18:47:29 ian Exp $ +@c $Id: bfd.texinfo,v 1.1.1.1 1999/05/03 07:28:58 rth Exp $ @tex % NOTE LOCAL KLUGE TO AVOID TOO MUCH WHITESPACE \global\long\def\example{% @@ -67,7 +67,7 @@ into another language, under the above conditions for modified versions. @tex \def\$#1${{#1}} % Kluge: collect RCS revision info without $...$ -\xdef\manvers{\$Revision: 1.29 $} % For use in headers, footers too +\xdef\manvers{\$Revision: 1.1.1.1 $} % For use in headers, footers too {\parskip=0pt \hfill Cygnus Support\par \hfill sac\@cygnus.com\par diff --git a/contrib/binutils/bfd/doc/bfdint.texi b/contrib/binutils/bfd/doc/bfdint.texi new file mode 100644 index 0000000..39eaacf --- /dev/null +++ b/contrib/binutils/bfd/doc/bfdint.texi @@ -0,0 +1,1885 @@ +\input texinfo +@setfilename bfdint.info + +@settitle BFD Internals +@iftex +@titlepage +@title{BFD Internals} +@author{Ian Lance Taylor} +@author{Cygnus Solutions} +@page +@end iftex + +@node Top +@top BFD Internals +@raisesections +@cindex bfd internals + +This document describes some BFD internal information which may be +helpful when working on BFD. It is very incomplete. + +This document is not updated regularly, and may be out of date. It was +last modified on $Date: 2000/04/30 15:07:52 $. + +The initial version of this document was written by Ian Lance Taylor +@email{ian@@cygnus.com}. + +@menu +* BFD overview:: BFD overview +* BFD guidelines:: BFD programming guidelines +* BFD target vector:: BFD target vector +* BFD generated files:: BFD generated files +* BFD multiple compilations:: Files compiled multiple times in BFD +* BFD relocation handling:: BFD relocation handling +* BFD ELF support:: BFD ELF support +* BFD glossary:: Glossary +* Index:: Index +@end menu + +@node BFD overview +@section BFD overview + +BFD is a library which provides a single interface to read and write +object files, executables, archive files, and core files in any format. + +@menu +* BFD library interfaces:: BFD library interfaces +* BFD library users:: BFD library users +* BFD view:: The BFD view of a file +* BFD blindness:: BFD loses information +@end menu + +@node BFD library interfaces +@subsection BFD library interfaces + +One way to look at the BFD library is to divide it into four parts by +type of interface. + +The first interface is the set of generic functions which programs using +the BFD library will call. These generic function normally translate +directly or indirectly into calls to routines which are specific to a +particular object file format. Many of these generic functions are +actually defined as macros in @file{bfd.h}. These functions comprise +the official BFD interface. + +The second interface is the set of functions which appear in the target +vectors. This is the bulk of the code in BFD. A target vector is a set +of function pointers specific to a particular object file format. The +target vector is used to implement the generic BFD functions. These +functions are always called through the target vector, and are never +called directly. The target vector is described in detail in @ref{BFD +target vector}. The set of functions which appear in a particular +target vector is often referred to as a BFD backend. + +The third interface is a set of oddball functions which are typically +specific to a particular object file format, are not generic functions, +and are called from outside of the BFD library. These are used as hooks +by the linker and the assembler when a particular object file format +requires some action which the BFD generic interface does not provide. +These functions are typically declared in @file{bfd.h}, but in many +cases they are only provided when BFD is configured with support for a +particular object file format. These functions live in a grey area, and +are not really part of the official BFD interface. + +The fourth interface is the set of BFD support functions which are +called by the other BFD functions. These manage issues like memory +allocation, error handling, file access, hash tables, swapping, and the +like. These functions are never called from outside of the BFD library. + +@node BFD library users +@subsection BFD library users + +Another way to look at the BFD library is to divide it into three parts +by the manner in which it is used. + +The first use is to read an object file. The object file readers are +programs like @samp{gdb}, @samp{nm}, @samp{objdump}, and @samp{objcopy}. +These programs use BFD to view an object file in a generic form. The +official BFD interface is normally fully adequate for these programs. + +The second use is to write an object file. The object file writers are +programs like @samp{gas} and @samp{objcopy}. These programs use BFD to +create an object file. The official BFD interface is normally adequate +for these programs, but for some object file formats the assembler needs +some additional hooks in order to set particular flags or other +information. The official BFD interface includes functions to copy +private information from one object file to another, and these functions +are used by @samp{objcopy} to avoid information loss. + +The third use is to link object files. There is only one object file +linker, @samp{ld}. Originally, @samp{ld} was an object file reader and +an object file writer, and it did the link operation using the generic +BFD structures. However, this turned out to be too slow and too memory +intensive. + +The official BFD linker functions were written to permit specific BFD +backends to perform the link without translating through the generic +structures, in the normal case where all the input files and output file +have the same object file format. Not all of the backends currently +implement the new interface, and there are default linking functions +within BFD which use the generic structures and which work with all +backends. + +For several object file formats the linker needs additional hooks which +are not provided by the official BFD interface, particularly for dynamic +linking support. These functions are typically called from the linker +emulation template. + +@node BFD view +@subsection The BFD view of a file + +BFD uses generic structures to manage information. It translates data +into the generic form when reading files, and out of the generic form +when writing files. + +BFD describes a file as a pointer to the @samp{bfd} type. A @samp{bfd} +is composed of the following elements. The BFD information can be +displayed using the @samp{objdump} program with various options. + +@table @asis +@item general information +The object file format, a few general flags, the start address. +@item architecture +The architecture, including both a general processor type (m68k, MIPS +etc.) and a specific machine number (m68000, R4000, etc.). +@item sections +A list of sections. +@item symbols +A symbol table. +@end table + +BFD represents a section as a pointer to the @samp{asection} type. Each +section has a name and a size. Most sections also have an associated +block of data, known as the section contents. Sections also have +associated flags, a virtual memory address, a load memory address, a +required alignment, a list of relocations, and other miscellaneous +information. + +BFD represents a relocation as a pointer to the @samp{arelent} type. A +relocation describes an action which the linker must take to modify the +section contents. Relocations have a symbol, an address, an addend, and +a pointer to a howto structure which describes how to perform the +relocation. For more information, see @ref{BFD relocation handling}. + +BFD represents a symbol as a pointer to the @samp{asymbol} type. A +symbol has a name, a pointer to a section, an offset within that +section, and some flags. + +Archive files do not have any sections or symbols. Instead, BFD +represents an archive file as a file which contains a list of +@samp{bfd}s. BFD also provides access to the archive symbol map, as a +list of symbol names. BFD provides a function to return the @samp{bfd} +within the archive which corresponds to a particular entry in the +archive symbol map. + +@node BFD blindness +@subsection BFD loses information + +Most object file formats have information which BFD can not represent in +its generic form, at least as currently defined. + +There is often explicit information which BFD can not represent. For +example, the COFF version stamp, or the ELF program segments. BFD +provides special hooks to handle this information when copying, +printing, or linking an object file. The BFD support for a particular +object file format will normally store this information in private data +and handle it using the special hooks. + +In some cases there is also implicit information which BFD can not +represent. For example, the MIPS processor distinguishes small and +large symbols, and requires that all small symbls be within 32K of the +GP register. This means that the MIPS assembler must be able to mark +variables as either small or large, and the MIPS linker must know to put +small symbols within range of the GP register. Since BFD can not +represent this information, this means that the assembler and linker +must have information that is specific to a particular object file +format which is outside of the BFD library. + +This loss of information indicates areas where the BFD paradigm breaks +down. It is not actually possible to represent the myriad differences +among object file formats using a single generic interface, at least not +in the manner which BFD does it today. + +Nevertheless, the BFD library does greatly simplify the task of dealing +with object files, and particular problems caused by information loss +can normally be solved using some sort of relatively constrained hook +into the library. + + + +@node BFD guidelines +@section BFD programming guidelines +@cindex bfd programming guidelines +@cindex programming guidelines for bfd +@cindex guidelines, bfd programming + +There is a lot of poorly written and confusing code in BFD. New BFD +code should be written to a higher standard. Merely because some BFD +code is written in a particular manner does not mean that you should +emulate it. + +Here are some general BFD programming guidelines: + +@itemize @bullet +@item +Follow the GNU coding standards. + +@item +Avoid global variables. We ideally want BFD to be fully reentrant, so +that it can be used in multiple threads. All uses of global or static +variables interfere with that. Initialized constant variables are OK, +and they should be explicitly marked with const. Instead of global +variables, use data attached to a BFD or to a linker hash table. + +@item +All externally visible functions should have names which start with +@samp{bfd_}. All such functions should be declared in some header file, +typically @file{bfd.h}. See, for example, the various declarations near +the end of @file{bfd-in.h}, which mostly declare functions required by +specific linker emulations. + +@item +All functions which need to be visible from one file to another within +BFD, but should not be visible outside of BFD, should start with +@samp{_bfd_}. Although external names beginning with @samp{_} are +prohibited by the ANSI standard, in practice this usage will always +work, and it is required by the GNU coding standards. + +@item +Always remember that people can compile using @samp{--enable-targets} to +build several, or all, targets at once. It must be possible to link +together the files for all targets. + +@item +BFD code should compile with few or no warnings using @samp{gcc -Wall}. +Some warnings are OK, like the absence of certain function declarations +which may or may not be declared in system header files. Warnings about +ambiguous expressions and the like should always be fixed. +@end itemize + +@node BFD target vector +@section BFD target vector +@cindex bfd target vector +@cindex target vector in bfd + +BFD supports multiple object file formats by using the @dfn{target +vector}. This is simply a set of function pointers which implement +behaviour that is specific to a particular object file format. + +In this section I list all of the entries in the target vector and +describe what they do. + +@menu +* BFD target vector miscellaneous:: Miscellaneous constants +* BFD target vector swap:: Swapping functions +* BFD target vector format:: Format type dependent functions +* BFD_JUMP_TABLE macros:: BFD_JUMP_TABLE macros +* BFD target vector generic:: Generic functions +* BFD target vector copy:: Copy functions +* BFD target vector core:: Core file support functions +* BFD target vector archive:: Archive functions +* BFD target vector symbols:: Symbol table functions +* BFD target vector relocs:: Relocation support +* BFD target vector write:: Output functions +* BFD target vector link:: Linker functions +* BFD target vector dynamic:: Dynamic linking information functions +@end menu + +@node BFD target vector miscellaneous +@subsection Miscellaneous constants + +The target vector starts with a set of constants. + +@table @samp +@item name +The name of the target vector. This is an arbitrary string. This is +how the target vector is named in command line options for tools which +use BFD, such as the @samp{-oformat} linker option. + +@item flavour +A general description of the type of target. The following flavours are +currently defined: + +@table @samp +@item bfd_target_unknown_flavour +Undefined or unknown. +@item bfd_target_aout_flavour +a.out. +@item bfd_target_coff_flavour +COFF. +@item bfd_target_ecoff_flavour +ECOFF. +@item bfd_target_elf_flavour +ELF. +@item bfd_target_ieee_flavour +IEEE-695. +@item bfd_target_nlm_flavour +NLM. +@item bfd_target_oasys_flavour +OASYS. +@item bfd_target_tekhex_flavour +Tektronix hex format. +@item bfd_target_srec_flavour +Motorola S-record format. +@item bfd_target_ihex_flavour +Intel hex format. +@item bfd_target_som_flavour +SOM (used on HP/UX). +@item bfd_target_os9k_flavour +os9000. +@item bfd_target_versados_flavour +VERSAdos. +@item bfd_target_msdos_flavour +MS-DOS. +@item bfd_target_evax_flavour +openVMS. +@end table + +@item byteorder +The byte order of data in the object file. One of +@samp{BFD_ENDIAN_BIG}, @samp{BFD_ENDIAN_LITTLE}, or +@samp{BFD_ENDIAN_UNKNOWN}. The latter would be used for a format such +as S-records which do not record the architecture of the data. + +@item header_byteorder +The byte order of header information in the object file. Normally the +same as the @samp{byteorder} field, but there are certain cases where it +may be different. + +@item object_flags +Flags which may appear in the @samp{flags} field of a BFD with this +format. + +@item section_flags +Flags which may appear in the @samp{flags} field of a section within a +BFD with this format. + +@item symbol_leading_char +A character which the C compiler normally puts before a symbol. For +example, an a.out compiler will typically generate the symbol +@samp{_foo} for a function named @samp{foo} in the C source, in which +case this field would be @samp{_}. If there is no such character, this +field will be @samp{0}. + +@item ar_pad_char +The padding character to use at the end of an archive name. Normally +@samp{/}. + +@item ar_max_namelen +The maximum length of a short name in an archive. Normally @samp{14}. + +@item backend_data +A pointer to constant backend data. This is used by backends to store +whatever additional information they need to distinguish similar target +vectors which use the same sets of functions. +@end table + +@node BFD target vector swap +@subsection Swapping functions + +Every target vector has fuction pointers used for swapping information +in and out of the target representation. There are two sets of +functions: one for data information, and one for header information. +Each set has three sizes: 64-bit, 32-bit, and 16-bit. Each size has +three actual functions: put, get unsigned, and get signed. + +These 18 functions are used to convert data between the host and target +representations. + +@node BFD target vector format +@subsection Format type dependent functions + +Every target vector has three arrays of function pointers which are +indexed by the BFD format type. The BFD format types are as follows: + +@table @samp +@item bfd_unknown +Unknown format. Not used for anything useful. +@item bfd_object +Object file. +@item bfd_archive +Archive file. +@item bfd_core +Core file. +@end table + +The three arrays of function pointers are as follows: + +@table @samp +@item bfd_check_format +Check whether the BFD is of a particular format (object file, archive +file, or core file) corresponding to this target vector. This is called +by the @samp{bfd_check_format} function when examining an existing BFD. +If the BFD matches the desired format, this function will initialize any +format specific information such as the @samp{tdata} field of the BFD. +This function must be called before any other BFD target vector function +on a file opened for reading. + +@item bfd_set_format +Set the format of a BFD which was created for output. This is called by +the @samp{bfd_set_format} function after creating the BFD with a +function such as @samp{bfd_openw}. This function will initialize format +specific information required to write out an object file or whatever of +the given format. This function must be called before any other BFD +target vector function on a file opened for writing. + +@item bfd_write_contents +Write out the contents of the BFD in the given format. This is called +by @samp{bfd_close} function for a BFD opened for writing. This really +should not be an array selected by format type, as the +@samp{bfd_set_format} function provides all the required information. +In fact, BFD will fail if a different format is used when calling +through the @samp{bfd_set_format} and the @samp{bfd_write_contents} +arrays; fortunately, since @samp{bfd_close} gets it right, this is a +difficult error to make. +@end table + +@node BFD_JUMP_TABLE macros +@subsection @samp{BFD_JUMP_TABLE} macros +@cindex @samp{BFD_JUMP_TABLE} + +Most target vectors are defined using @samp{BFD_JUMP_TABLE} macros. +These macros take a single argument, which is a prefix applied to a set +of functions. The macros are then used to initialize the fields in the +target vector. + +For example, the @samp{BFD_JUMP_TABLE_RELOCS} macro defines three +functions: @samp{_get_reloc_upper_bound}, @samp{_canonicalize_reloc}, +and @samp{_bfd_reloc_type_lookup}. A reference like +@samp{BFD_JUMP_TABLE_RELOCS (foo)} will expand into three functions +prefixed with @samp{foo}: @samp{foo_get_reloc_upper_bound}, etc. The +@samp{BFD_JUMP_TABLE_RELOCS} macro will be placed such that those three +functions initialize the appropriate fields in the BFD target vector. + +This is done because it turns out that many different target vectors can +share certain classes of functions. For example, archives are similar +on most platforms, so most target vectors can use the same archive +functions. Those target vectors all use @samp{BFD_JUMP_TABLE_ARCHIVE} +with the same argument, calling a set of functions which is defined in +@file{archive.c}. + +Each of the @samp{BFD_JUMP_TABLE} macros is mentioned below along with +the description of the function pointers which it defines. The function +pointers will be described using the name without the prefix which the +@samp{BFD_JUMP_TABLE} macro defines. This name is normally the same as +the name of the field in the target vector structure. Any differences +will be noted. + +@node BFD target vector generic +@subsection Generic functions +@cindex @samp{BFD_JUMP_TABLE_GENERIC} + +The @samp{BFD_JUMP_TABLE_GENERIC} macro is used for some catch all +functions which don't easily fit into other categories. + +@table @samp +@item _close_and_cleanup +Free any target specific information associated with the BFD. This is +called when any BFD is closed (the @samp{bfd_write_contents} function +mentioned earlier is only called for a BFD opened for writing). Most +targets use @samp{bfd_alloc} to allocate all target specific +information, and therefore don't have to do anything in this function. +This function pointer is typically set to +@samp{_bfd_generic_close_and_cleanup}, which simply returns true. + +@item _bfd_free_cached_info +Free any cached information associated with the BFD which can be +recreated later if necessary. This is used to reduce the memory +consumption required by programs using BFD. This is normally called via +the @samp{bfd_free_cached_info} macro. It is used by the default +archive routines when computing the archive map. Most targets do not +do anything special for this entry point, and just set it to +@samp{_bfd_generic_free_cached_info}, which simply returns true. + +@item _new_section_hook +This is called from @samp{bfd_make_section_anyway} whenever a new +section is created. Most targets use it to initialize section specific +information. This function is called whether or not the section +corresponds to an actual section in an actual BFD. + +@item _get_section_contents +Get the contents of a section. This is called from +@samp{bfd_get_section_contents}. Most targets set this to +@samp{_bfd_generic_get_section_contents}, which does a @samp{bfd_seek} +based on the section's @samp{filepos} field and a @samp{bfd_read}. The +corresponding field in the target vector is named +@samp{_bfd_get_section_contents}. + +@item _get_section_contents_in_window +Set a @samp{bfd_window} to hold the contents of a section. This is +called from @samp{bfd_get_section_contents_in_window}. The +@samp{bfd_window} idea never really caught on, and I don't think this is +ever called. Pretty much all targets implement this as +@samp{bfd_generic_get_section_contents_in_window}, which uses +@samp{bfd_get_section_contents} to do the right thing. The +corresponding field in the target vector is named +@samp{_bfd_get_section_contents_in_window}. +@end table + +@node BFD target vector copy +@subsection Copy functions +@cindex @samp{BFD_JUMP_TABLE_COPY} + +The @samp{BFD_JUMP_TABLE_COPY} macro is used for functions which are +called when copying BFDs, and for a couple of functions which deal with +internal BFD information. + +@table @samp +@item _bfd_copy_private_bfd_data +This is called when copying a BFD, via @samp{bfd_copy_private_bfd_data}. +If the input and output BFDs have the same format, this will copy any +private information over. This is called after all the section contents +have been written to the output file. Only a few targets do anything in +this function. + +@item _bfd_merge_private_bfd_data +This is called when linking, via @samp{bfd_merge_private_bfd_data}. It +gives the backend linker code a chance to set any special flags in the +output file based on the contents of the input file. Only a few targets +do anything in this function. + +@item _bfd_copy_private_section_data +This is similar to @samp{_bfd_copy_private_bfd_data}, but it is called +for each section, via @samp{bfd_copy_private_section_data}. This +function is called before any section contents have been written. Only +a few targets do anything in this function. + +@item _bfd_copy_private_symbol_data +This is called via @samp{bfd_copy_private_symbol_data}, but I don't +think anything actually calls it. If it were defined, it could be used +to copy private symbol data from one BFD to another. However, most BFDs +store extra symbol information by allocating space which is larger than +the @samp{asymbol} structure and storing private information in the +extra space. Since @samp{objcopy} and other programs copy symbol +information by copying pointers to @samp{asymbol} structures, the +private symbol information is automatically copied as well. Most +targets do not do anything in this function. + +@item _bfd_set_private_flags +This is called via @samp{bfd_set_private_flags}. It is basically a hook +for the assembler to set magic information. For example, the PowerPC +ELF assembler uses it to set flags which appear in the e_flags field of +the ELF header. Most targets do not do anything in this function. + +@item _bfd_print_private_bfd_data +This is called by @samp{objdump} when the @samp{-p} option is used. It +is called via @samp{bfd_print_private_data}. It prints any interesting +information about the BFD which can not be otherwise represented by BFD +and thus can not be printed by @samp{objdump}. Most targets do not do +anything in this function. +@end table + +@node BFD target vector core +@subsection Core file support functions +@cindex @samp{BFD_JUMP_TABLE_CORE} + +The @samp{BFD_JUMP_TABLE_CORE} macro is used for functions which deal +with core files. Obviously, these functions only do something +interesting for targets which have core file support. + +@table @samp +@item _core_file_failing_command +Given a core file, this returns the command which was run to produce the +core file. + +@item _core_file_failing_signal +Given a core file, this returns the signal number which produced the +core file. + +@item _core_file_matches_executable_p +Given a core file and a BFD for an executable, this returns whether the +core file was generated by the executable. +@end table + +@node BFD target vector archive +@subsection Archive functions +@cindex @samp{BFD_JUMP_TABLE_ARCHIVE} + +The @samp{BFD_JUMP_TABLE_ARCHIVE} macro is used for functions which deal +with archive files. Most targets use COFF style archive files +(including ELF targets), and these use @samp{_bfd_archive_coff} as the +argument to @samp{BFD_JUMP_TABLE_ARCHIVE}. Some targets use BSD/a.out +style archives, and these use @samp{_bfd_archive_bsd}. (The main +difference between BSD and COFF archives is the format of the archive +symbol table). Targets with no archive support use +@samp{_bfd_noarchive}. Finally, a few targets have unusual archive +handling. + +@table @samp +@item _slurp_armap +Read in the archive symbol table, storing it in private BFD data. This +is normally called from the archive @samp{check_format} routine. The +corresponding field in the target vector is named +@samp{_bfd_slurp_armap}. + +@item _slurp_extended_name_table +Read in the extended name table from the archive, if there is one, +storing it in private BFD data. This is normally called from the +archive @samp{check_format} routine. The corresponding field in the +target vector is named @samp{_bfd_slurp_extended_name_table}. + +@item construct_extended_name_table +Build and return an extended name table if one is needed to write out +the archive. This also adjusts the archive headers to refer to the +extended name table appropriately. This is normally called from the +archive @samp{write_contents} routine. The corresponding field in the +target vector is named @samp{_bfd_construct_extended_name_table}. + +@item _truncate_arname +This copies a file name into an archive header, truncating it as +required. It is normally called from the archive @samp{write_contents} +routine. This function is more interesting in targets which do not +support extended name tables, but I think the GNU @samp{ar} program +always uses extended name tables anyhow. The corresponding field in the +target vector is named @samp{_bfd_truncate_arname}. + +@item _write_armap +Write out the archive symbol table using calls to @samp{bfd_write}. +This is normally called from the archive @samp{write_contents} routine. +The corresponding field in the target vector is named @samp{write_armap} +(no leading underscore). + +@item _read_ar_hdr +Read and parse an archive header. This handles expanding the archive +header name into the real file name using the extended name table. This +is called by routines which read the archive symbol table or the archive +itself. The corresponding field in the target vector is named +@samp{_bfd_read_ar_hdr_fn}. + +@item _openr_next_archived_file +Given an archive and a BFD representing a file stored within the +archive, return a BFD for the next file in the archive. This is called +via @samp{bfd_openr_next_archived_file}. The corresponding field in the +target vector is named @samp{openr_next_archived_file} (no leading +underscore). + +@item _get_elt_at_index +Given an archive and an index, return a BFD for the file in the archive +corresponding to that entry in the archive symbol table. This is called +via @samp{bfd_get_elt_at_index}. The corresponding field in the target +vector is named @samp{_bfd_get_elt_at_index}. + +@item _generic_stat_arch_elt +Do a stat on an element of an archive, returning information read from +the archive header (modification time, uid, gid, file mode, size). This +is called via @samp{bfd_stat_arch_elt}. The corresponding field in the +target vector is named @samp{_bfd_stat_arch_elt}. + +@item _update_armap_timestamp +After the entire contents of an archive have been written out, update +the timestamp of the archive symbol table to be newer than that of the +file. This is required for a.out style archives. This is normally +called by the archive @samp{write_contents} routine. The corresponding +field in the target vector is named @samp{_bfd_update_armap_timestamp}. +@end table + +@node BFD target vector symbols +@subsection Symbol table functions +@cindex @samp{BFD_JUMP_TABLE_SYMBOLS} + +The @samp{BFD_JUMP_TABLE_SYMBOLS} macro is used for functions which deal +with symbols. + +@table @samp +@item _get_symtab_upper_bound +Return a sensible upper bound on the amount of memory which will be +required to read the symbol table. In practice most targets return the +amount of memory required to hold @samp{asymbol} pointers for all the +symbols plus a trailing @samp{NULL} entry, and store the actual symbol +information in BFD private data. This is called via +@samp{bfd_get_symtab_upper_bound}. The corresponding field in the +target vector is named @samp{_bfd_get_symtab_upper_bound}. + +@item _get_symtab +Read in the symbol table. This is called via +@samp{bfd_canonicalize_symtab}. The corresponding field in the target +vector is named @samp{_bfd_canonicalize_symtab}. + +@item _make_empty_symbol +Create an empty symbol for the BFD. This is needed because most targets +store extra information with each symbol by allocating a structure +larger than an @samp{asymbol} and storing the extra information at the +end. This function will allocate the right amount of memory, and return +what looks like a pointer to an empty @samp{asymbol}. This is called +via @samp{bfd_make_empty_symbol}. The corresponding field in the target +vector is named @samp{_bfd_make_empty_symbol}. + +@item _print_symbol +Print information about the symbol. This is called via +@samp{bfd_print_symbol}. One of the arguments indicates what sort of +information should be printed: + +@table @samp +@item bfd_print_symbol_name +Just print the symbol name. +@item bfd_print_symbol_more +Print the symbol name and some interesting flags. I don't think +anything actually uses this. +@item bfd_print_symbol_all +Print all information about the symbol. This is used by @samp{objdump} +when run with the @samp{-t} option. +@end table +The corresponding field in the target vector is named +@samp{_bfd_print_symbol}. + +@item _get_symbol_info +Return a standard set of information about the symbol. This is called +via @samp{bfd_symbol_info}. The corresponding field in the target +vector is named @samp{_bfd_get_symbol_info}. + +@item _bfd_is_local_label_name +Return whether the given string would normally represent the name of a +local label. This is called via @samp{bfd_is_local_label} and +@samp{bfd_is_local_label_name}. Local labels are normally discarded by +the assembler. In the linker, this defines the difference between the +@samp{-x} and @samp{-X} options. + +@item _get_lineno +Return line number information for a symbol. This is only meaningful +for a COFF target. This is called when writing out COFF line numbers. + +@item _find_nearest_line +Given an address within a section, use the debugging information to find +the matching file name, function name, and line number, if any. This is +called via @samp{bfd_find_nearest_line}. The corresponding field in the +target vector is named @samp{_bfd_find_nearest_line}. + +@item _bfd_make_debug_symbol +Make a debugging symbol. This is only meaningful for a COFF target, +where it simply returns a symbol which will be placed in the +@samp{N_DEBUG} section when it is written out. This is called via +@samp{bfd_make_debug_symbol}. + +@item _read_minisymbols +Minisymbols are used to reduce the memory requirements of programs like +@samp{nm}. A minisymbol is a cookie pointing to internal symbol +information which the caller can use to extract complete symbol +information. This permits BFD to not convert all the symbols into +generic form, but to instead convert them one at a time. This is called +via @samp{bfd_read_minisymbols}. Most targets do not implement this, +and just use generic support which is based on using standard +@samp{asymbol} structures. + +@item _minisymbol_to_symbol +Convert a minisymbol to a standard @samp{asymbol}. This is called via +@samp{bfd_minisymbol_to_symbol}. +@end table + +@node BFD target vector relocs +@subsection Relocation support +@cindex @samp{BFD_JUMP_TABLE_RELOCS} + +The @samp{BFD_JUMP_TABLE_RELOCS} macro is used for functions which deal +with relocations. + +@table @samp +@item _get_reloc_upper_bound +Return a sensible upper bound on the amount of memory which will be +required to read the relocations for a section. In practice most +targets return the amount of memory required to hold @samp{arelent} +pointers for all the relocations plus a trailing @samp{NULL} entry, and +store the actual relocation information in BFD private data. This is +called via @samp{bfd_get_reloc_upper_bound}. + +@item _canonicalize_reloc +Return the relocation information for a section. This is called via +@samp{bfd_canonicalize_reloc}. The corresponding field in the target +vector is named @samp{_bfd_canonicalize_reloc}. + +@item _bfd_reloc_type_lookup +Given a relocation code, return the corresponding howto structure +(@pxref{BFD relocation codes}). This is called via +@samp{bfd_reloc_type_lookup}. The corresponding field in the target +vector is named @samp{reloc_type_lookup}. +@end table + +@node BFD target vector write +@subsection Output functions +@cindex @samp{BFD_JUMP_TABLE_WRITE} + +The @samp{BFD_JUMP_TABLE_WRITE} macro is used for functions which deal +with writing out a BFD. + +@table @samp +@item _set_arch_mach +Set the architecture and machine number for a BFD. This is called via +@samp{bfd_set_arch_mach}. Most targets implement this by calling +@samp{bfd_default_set_arch_mach}. The corresponding field in the target +vector is named @samp{_bfd_set_arch_mach}. + +@item _set_section_contents +Write out the contents of a section. This is called via +@samp{bfd_set_section_contents}. The corresponding field in the target +vector is named @samp{_bfd_set_section_contents}. +@end table + +@node BFD target vector link +@subsection Linker functions +@cindex @samp{BFD_JUMP_TABLE_LINK} + +The @samp{BFD_JUMP_TABLE_LINK} macro is used for functions called by the +linker. + +@table @samp +@item _sizeof_headers +Return the size of the header information required for a BFD. This is +used to implement the @samp{SIZEOF_HEADERS} linker script function. It +is normally used to align the first section at an efficient position on +the page. This is called via @samp{bfd_sizeof_headers}. The +corresponding field in the target vector is named +@samp{_bfd_sizeof_headers}. + +@item _bfd_get_relocated_section_contents +Read the contents of a section and apply the relocation information. +This handles both a final link and a relocateable link; in the latter +case, it adjust the relocation information as well. This is called via +@samp{bfd_get_relocated_section_contents}. Most targets implement it by +calling @samp{bfd_generic_get_relocated_section_contents}. + +@item _bfd_relax_section +Try to use relaxation to shrink the size of a section. This is called +by the linker when the @samp{-relax} option is used. This is called via +@samp{bfd_relax_section}. Most targets do not support any sort of +relaxation. + +@item _bfd_link_hash_table_create +Create the symbol hash table to use for the linker. This linker hook +permits the backend to control the size and information of the elements +in the linker symbol hash table. This is called via +@samp{bfd_link_hash_table_create}. + +@item _bfd_link_add_symbols +Given an object file or an archive, add all symbols into the linker +symbol hash table. Use callbacks to the linker to include archive +elements in the link. This is called via @samp{bfd_link_add_symbols}. + +@item _bfd_final_link +Finish the linking process. The linker calls this hook after all of the +input files have been read, when it is ready to finish the link and +generate the output file. This is called via @samp{bfd_final_link}. + +@item _bfd_link_split_section +I don't know what this is for. Nothing seems to call it. The only +non-trivial definition is in @file{som.c}. +@end table + +@node BFD target vector dynamic +@subsection Dynamic linking information functions +@cindex @samp{BFD_JUMP_TABLE_DYNAMIC} + +The @samp{BFD_JUMP_TABLE_DYNAMIC} macro is used for functions which read +dynamic linking information. + +@table @samp +@item _get_dynamic_symtab_upper_bound +Return a sensible upper bound on the amount of memory which will be +required to read the dynamic symbol table. In practice most targets +return the amount of memory required to hold @samp{asymbol} pointers for +all the symbols plus a trailing @samp{NULL} entry, and store the actual +symbol information in BFD private data. This is called via +@samp{bfd_get_dynamic_symtab_upper_bound}. The corresponding field in +the target vector is named @samp{_bfd_get_dynamic_symtab_upper_bound}. + +@item _canonicalize_dynamic_symtab +Read the dynamic symbol table. This is called via +@samp{bfd_canonicalize_dynamic_symtab}. The corresponding field in the +target vector is named @samp{_bfd_canonicalize_dynamic_symtab}. + +@item _get_dynamic_reloc_upper_bound +Return a sensible upper bound on the amount of memory which will be +required to read the dynamic relocations. In practice most targets +return the amount of memory required to hold @samp{arelent} pointers for +all the relocations plus a trailing @samp{NULL} entry, and store the +actual relocation information in BFD private data. This is called via +@samp{bfd_get_dynamic_reloc_upper_bound}. The corresponding field in +the target vector is named @samp{_bfd_get_dynamic_reloc_upper_bound}. + +@item _canonicalize_dynamic_reloc +Read the dynamic relocations. This is called via +@samp{bfd_canonicalize_dynamic_reloc}. The corresponding field in the +target vector is named @samp{_bfd_canonicalize_dynamic_reloc}. +@end table + +@node BFD generated files +@section BFD generated files +@cindex generated files in bfd +@cindex bfd generated files + +BFD contains several automatically generated files. This section +describes them. Some files are created at configure time, when you +configure BFD. Some files are created at make time, when you build +BFD. Some files are automatically rebuilt at make time, but only if +you configure with the @samp{--enable-maintainer-mode} option. Some +files live in the object directory---the directory from which you run +configure---and some live in the source directory. All files that live +in the source directory are checked into the CVS repository. + +@table @file +@item bfd.h +@cindex @file{bfd.h} +@cindex @file{bfd-in3.h} +Lives in the object directory. Created at make time from +@file{bfd-in2.h} via @file{bfd-in3.h}. @file{bfd-in3.h} is created at +configure time from @file{bfd-in2.h}. There are automatic dependencies +to rebuild @file{bfd-in3.h} and hence @file{bfd.h} if @file{bfd-in2.h} +changes, so you can normally ignore @file{bfd-in3.h}, and just think +about @file{bfd-in2.h} and @file{bfd.h}. + +@file{bfd.h} is built by replacing a few strings in @file{bfd-in2.h}. +To see them, search for @samp{@@} in @file{bfd-in2.h}. They mainly +control whether BFD is built for a 32 bit target or a 64 bit target. + +@item bfd-in2.h +@cindex @file{bfd-in2.h} +Lives in the source directory. Created from @file{bfd-in.h} and several +other BFD source files. If you configure with the +@samp{--enable-maintainer-mode} option, @file{bfd-in2.h} is rebuilt +automatically when a source file changes. + +@item elf32-target.h +@itemx elf64-target.h +@cindex @file{elf32-target.h} +@cindex @file{elf64-target.h} +Live in the object directory. Created from @file{elfxx-target.h}. +These files are versions of @file{elfxx-target.h} customized for either +a 32 bit ELF target or a 64 bit ELF target. + +@item libbfd.h +@cindex @file{libbfd.h} +Lives in the source directory. Created from @file{libbfd-in.h} and +several other BFD source files. If you configure with the +@samp{--enable-maintainer-mode} option, @file{libbfd.h} is rebuilt +automatically when a source file changes. + +@item libcoff.h +@cindex @file{libcoff.h} +Lives in the source directory. Created from @file{libcoff-in.h} and +@file{coffcode.h}. If you configure with the +@samp{--enable-maintainer-mode} option, @file{libcoff.h} is rebuilt +automatically when a source file changes. + +@item targmatch.h +@cindex @file{targmatch.h} +Lives in the object directory. Created at make time from +@file{config.bfd}. This file is used to map configuration triplets into +BFD target vector variable names at run time. +@end table + +@node BFD multiple compilations +@section Files compiled multiple times in BFD +Several files in BFD are compiled multiple times. By this I mean that +there are header files which contain function definitions. These header +files are included by other files, and thus the functions are compiled +once per file which includes them. + +Preprocessor macros are used to control the compilation, so that each +time the files are compiled the resulting functions are slightly +different. Naturally, if they weren't different, there would be no +reason to compile them multiple times. + +This is a not a particularly good programming technique, and future BFD +work should avoid it. + +@itemize @bullet +@item +Since this technique is rarely used, even experienced C programmers find +it confusing. + +@item +It is difficult to debug programs which use BFD, since there is no way +to describe which version of a particular function you are looking at. + +@item +Programs which use BFD wind up incorporating two or more slightly +different versions of the same function, which wastes space in the +executable. + +@item +This technique is never required nor is it especially efficient. It is +always possible to use statically initialized structures holding +function pointers and magic constants instead. +@end itemize + +The following is a list of the files which are compiled multiple times. + +@table @file +@item aout-target.h +@cindex @file{aout-target.h} +Describes a few functions and the target vector for a.out targets. This +is used by individual a.out targets with different definitions of +@samp{N_TXTADDR} and similar a.out macros. + +@item aoutf1.h +@cindex @file{aoutf1.h} +Implements standard SunOS a.out files. In principle it supports 64 bit +a.out targets based on the preprocessor macro @samp{ARCH_SIZE}, but +since all known a.out targets are 32 bits, this code may or may not +work. This file is only included by a few other files, and it is +difficult to justify its existence. + +@item aoutx.h +@cindex @file{aoutx.h} +Implements basic a.out support routines. This file can be compiled for +either 32 or 64 bit support. Since all known a.out targets are 32 bits, +the 64 bit support may or may not work. I believe the original +intention was that this file would only be included by @samp{aout32.c} +and @samp{aout64.c}, and that other a.out targets would simply refer to +the functions it defined. Unfortunately, some other a.out targets +started including it directly, leading to a somewhat confused state of +affairs. + +@item coffcode.h +@cindex @file{coffcode.h} +Implements basic COFF support routines. This file is included by every +COFF target. It implements code which handles COFF magic numbers as +well as various hook functions called by the generic COFF functions in +@file{coffgen.c}. This file is controlled by a number of different +macros, and more are added regularly. + +@item coffswap.h +@cindex @file{coffswap.h} +Implements COFF swapping routines. This file is included by +@file{coffcode.h}, and thus by every COFF target. It implements the +routines which swap COFF structures between internal and external +format. The main control for this file is the external structure +definitions in the files in the @file{include/coff} directory. A COFF +target file will include one of those files before including +@file{coffcode.h} and thus @file{coffswap.h}. There are a few other +macros which affect @file{coffswap.h} as well, mostly describing whether +certain fields are present in the external structures. + +@item ecoffswap.h +@cindex @file{ecoffswap.h} +Implements ECOFF swapping routines. This is like @file{coffswap.h}, but +for ECOFF. It is included by the ECOFF target files (of which there are +only two). The control is the preprocessor macro @samp{ECOFF_32} or +@samp{ECOFF_64}. + +@item elfcode.h +@cindex @file{elfcode.h} +Implements ELF functions that use external structure definitions. This +file is included by two other files: @file{elf32.c} and @file{elf64.c}. +It is controlled by the @samp{ARCH_SIZE} macro which is defined to be +@samp{32} or @samp{64} before including it. The @samp{NAME} macro is +used internally to give the functions different names for the two target +sizes. + +@item elfcore.h +@cindex @file{elfcore.h} +Like @file{elfcode.h}, but for functions that are specific to ELF core +files. This is included only by @file{elfcode.h}. + +@item elflink.h +@cindex @file{elflink.h} +Like @file{elfcode.h}, but for functions used by the ELF linker. This +is included only by @file{elfcode.h}. + +@item elfxx-target.h +@cindex @file{elfxx-target.h} +This file is the source for the generated files @file{elf32-target.h} +and @file{elf64-target.h}, one of which is included by every ELF target. +It defines the ELF target vector. + +@item freebsd.h +@cindex @file{freebsd.h} +Presumably intended to be included by all FreeBSD targets, but in fact +there is only one such target, @samp{i386-freebsd}. This defines a +function used to set the right magic number for FreeBSD, as well as +various macros, and includes @file{aout-target.h}. + +@item netbsd.h +@cindex @file{netbsd.h} +Like @file{freebsd.h}, except that there are several files which include +it. + +@item nlm-target.h +@cindex @file{nlm-target.h} +Defines the target vector for a standard NLM target. + +@item nlmcode.h +@cindex @file{nlmcode.h} +Like @file{elfcode.h}, but for NLM targets. This is only included by +@file{nlm32.c} and @file{nlm64.c}, both of which define the macro +@samp{ARCH_SIZE} to an appropriate value. There are no 64 bit NLM +targets anyhow, so this is sort of useless. + +@item nlmswap.h +@cindex @file{nlmswap.h} +Like @file{coffswap.h}, but for NLM targets. This is included by each +NLM target, but I think it winds up compiling to the exact same code for +every target, and as such is fairly useless. + +@item peicode.h +@cindex @file{peicode.h} +Provides swapping routines and other hooks for PE targets. +@file{coffcode.h} will include this rather than @file{coffswap.h} for a +PE target. This defines PE specific versions of the COFF swapping +routines, and also defines some macros which control @file{coffcode.h} +itself. +@end table + +@node BFD relocation handling +@section BFD relocation handling +@cindex bfd relocation handling +@cindex relocations in bfd + +The handling of relocations is one of the more confusing aspects of BFD. +Relocation handling has been implemented in various different ways, all +somewhat incompatible, none perfect. + +@menu +* BFD relocation concepts:: BFD relocation concepts +* BFD relocation functions:: BFD relocation functions +* BFD relocation codes:: BFD relocation codes +* BFD relocation future:: BFD relocation future +@end menu + +@node BFD relocation concepts +@subsection BFD relocation concepts + +A relocation is an action which the linker must take when linking. It +describes a change to the contents of a section. The change is normally +based on the final value of one or more symbols. Relocations are +created by the assembler when it creates an object file. + +Most relocations are simple. A typical simple relocation is to set 32 +bits at a given offset in a section to the value of a symbol. This type +of relocation would be generated for code like @code{int *p = &i;} where +@samp{p} and @samp{i} are global variables. A relocation for the symbol +@samp{i} would be generated such that the linker would initialize the +area of memory which holds the value of @samp{p} to the value of the +symbol @samp{i}. + +Slightly more complex relocations may include an addend, which is a +constant to add to the symbol value before using it. In some cases a +relocation will require adding the symbol value to the existing contents +of the section in the object file. In others the relocation will simply +replace the contents of the section with the symbol value. Some +relocations are PC relative, so that the value to be stored in the +section is the difference between the value of a symbol and the final +address of the section contents. + +In general, relocations can be arbitrarily complex. For example, +relocations used in dynamic linking systems often require the linker to +allocate space in a different section and use the offset within that +section as the value to store. In the IEEE object file format, +relocations may involve arbitrary expressions. + +When doing a relocateable link, the linker may or may not have to do +anything with a relocation, depending upon the definition of the +relocation. Simple relocations generally do not require any special +action. + +@node BFD relocation functions +@subsection BFD relocation functions + +In BFD, each section has an array of @samp{arelent} structures. Each +structure has a pointer to a symbol, an address within the section, an +addend, and a pointer to a @samp{reloc_howto_struct} structure. The +howto structure has a bunch of fields describing the reloc, including a +type field. The type field is specific to the object file format +backend; none of the generic code in BFD examines it. + +Originally, the function @samp{bfd_perform_relocation} was supposed to +handle all relocations. In theory, many relocations would be simple +enough to be described by the fields in the howto structure. For those +that weren't, the howto structure included a @samp{special_function} +field to use as an escape. + +While this seems plausible, a look at @samp{bfd_perform_relocation} +shows that it failed. The function has odd special cases. Some of the +fields in the howto structure, such as @samp{pcrel_offset}, were not +adequately documented. + +The linker uses @samp{bfd_perform_relocation} to do all relocations when +the input and output file have different formats (e.g., when generating +S-records). The generic linker code, which is used by all targets which +do not define their own special purpose linker, uses +@samp{bfd_get_relocated_section_contents}, which for most targets turns +into a call to @samp{bfd_generic_get_relocated_section_contents}, which +calls @samp{bfd_perform_relocation}. So @samp{bfd_perform_relocation} +is still widely used, which makes it difficult to change, since it is +difficult to test all possible cases. + +The assembler used @samp{bfd_perform_relocation} for a while. This +turned out to be the wrong thing to do, since +@samp{bfd_perform_relocation} was written to handle relocations on an +existing object file, while the assembler needed to create relocations +in a new object file. The assembler was changed to use the new function +@samp{bfd_install_relocation} instead, and @samp{bfd_install_relocation} +was created as a copy of @samp{bfd_perform_relocation}. + +Unfortunately, the work did not progress any farther, so +@samp{bfd_install_relocation} remains a simple copy of +@samp{bfd_perform_relocation}, with all the odd special cases and +confusing code. This again is difficult to change, because again any +change can affect any assembler target, and so is difficult to test. + +The new linker, when using the same object file format for all input +files and the output file, does not convert relocations into +@samp{arelent} structures, so it can not use +@samp{bfd_perform_relocation} at all. Instead, users of the new linker +are expected to write a @samp{relocate_section} function which will +handle relocations in a target specific fashion. + +There are two helper functions for target specific relocation: +@samp{_bfd_final_link_relocate} and @samp{_bfd_relocate_contents}. +These functions use a howto structure, but they @emph{do not} use the +@samp{special_function} field. Since the functions are normally called +from target specific code, the @samp{special_function} field adds +little; any relocations which require special handling can be handled +without calling those functions. + +So, if you want to add a new target, or add a new relocation to an +existing target, you need to do the following: + +@itemize @bullet +@item +Make sure you clearly understand what the contents of the section should +look like after assembly, after a relocateable link, and after a final +link. Make sure you clearly understand the operations the linker must +perform during a relocateable link and during a final link. + +@item +Write a howto structure for the relocation. The howto structure is +flexible enough to represent any relocation which should be handled by +setting a contiguous bitfield in the destination to the value of a +symbol, possibly with an addend, possibly adding the symbol value to the +value already present in the destination. + +@item +Change the assembler to generate your relocation. The assembler will +call @samp{bfd_install_relocation}, so your howto structure has to be +able to handle that. You may need to set the @samp{special_function} +field to handle assembly correctly. Be careful to ensure that any code +you write to handle the assembler will also work correctly when doing a +relocateable link. For example, see @samp{bfd_elf_generic_reloc}. + +@item +Test the assembler. Consider the cases of relocation against an +undefined symbol, a common symbol, a symbol defined in the object file +in the same section, and a symbol defined in the object file in a +different section. These cases may not all be applicable for your +reloc. + +@item +If your target uses the new linker, which is recommended, add any +required handling to the target specific relocation function. In simple +cases this will just involve a call to @samp{_bfd_final_link_relocate} +or @samp{_bfd_relocate_contents}, depending upon the definition of the +relocation and whether the link is relocateable or not. + +@item +Test the linker. Test the case of a final link. If the relocation can +overflow, use a linker script to force an overflow and make sure the +error is reported correctly. Test a relocateable link, whether the +symbol is defined or undefined in the relocateable output. For both the +final and relocateable link, test the case when the symbol is a common +symbol, when the symbol looked like a common symbol but became a defined +symbol, when the symbol is defined in a different object file, and when +the symbol is defined in the same object file. + +@item +In order for linking to another object file format, such as S-records, +to work correctly, @samp{bfd_perform_relocation} has to do the right +thing for the relocation. You may need to set the +@samp{special_function} field to handle this correctly. Test this by +doing a link in which the output object file format is S-records. + +@item +Using the linker to generate relocateable output in a different object +file format is impossible in the general case, so you generally don't +have to worry about that. Linking input files of different object file +formats together is quite unusual, but if you're really dedicated you +may want to consider testing this case, both when the output object file +format is the same as your format, and when it is different. +@end itemize + +@node BFD relocation codes +@subsection BFD relocation codes + +BFD has another way of describing relocations besides the howto +structures described above: the enum @samp{bfd_reloc_code_real_type}. + +Every known relocation type can be described as a value in this +enumeration. The enumeration contains many target specific relocations, +but where two or more targets have the same relocation, a single code is +used. For example, the single value @samp{BFD_RELOC_32} is used for all +simple 32 bit relocation types. + +The main purpose of this relocation code is to give the assembler some +mechanism to create @samp{arelent} structures. In order for the +assembler to create an @samp{arelent} structure, it has to be able to +obtain a howto structure. The function @samp{bfd_reloc_type_lookup}, +which simply calls the target vector entry point +@samp{reloc_type_lookup}, takes a relocation code and returns a howto +structure. + +The function @samp{bfd_get_reloc_code_name} returns the name of a +relocation code. This is mainly used in error messages. + +Using both howto structures and relocation codes can be somewhat +confusing. There are many processor specific relocation codes. +However, the relocation is only fully defined by the howto structure. +The same relocation code will map to different howto structures in +different object file formats. For example, the addend handling may be +different. + +Most of the relocation codes are not really general. The assembler can +not use them without already understanding what sorts of relocations can +be used for a particular target. It might be possible to replace the +relocation codes with something simpler. + +@node BFD relocation future +@subsection BFD relocation future + +Clearly the current BFD relocation support is in bad shape. A +wholescale rewrite would be very difficult, because it would require +thorough testing of every BFD target. So some sort of incremental +change is required. + +My vague thoughts on this would involve defining a new, clearly defined, +howto structure. Some mechanism would be used to determine which type +of howto structure was being used by a particular format. + +The new howto structure would clearly define the relocation behaviour in +the case of an assembly, a relocateable link, and a final link. At +least one special function would be defined as an escape, and it might +make sense to define more. + +One or more generic functions similar to @samp{bfd_perform_relocation} +would be written to handle the new howto structure. + +This should make it possible to write a generic version of the relocate +section functions used by the new linker. The target specific code +would provide some mechanism (a function pointer or an initial +conversion) to convert target specific relocations into howto +structures. + +Ideally it would be possible to use this generic relocate section +function for the generic linker as well. That is, it would replace the +@samp{bfd_generic_get_relocated_section_contents} function which is +currently normally used. + +For the special case of ELF dynamic linking, more consideration needs to +be given to writing ELF specific but ELF target generic code to handle +special relocation types such as GOT and PLT. + +@node BFD ELF support +@section BFD ELF support +@cindex elf support in bfd +@cindex bfd elf support + +The ELF object file format is defined in two parts: a generic ABI and a +processor specific supplement. The ELF support in BFD is split in a +similar fashion. The processor specific support is largely kept within +a single file. The generic support is provided by several other files. +The processor specific support provides a set of function pointers and +constants used by the generic support. + +@menu +* BFD ELF sections and segments:: ELF sections and segments +* BFD ELF generic support:: BFD ELF generic support +* BFD ELF processor specific support:: BFD ELF processor specific support +* BFD ELF core files:: BFD ELF core files +* BFD ELF future:: BFD ELF future +@end menu + +@node BFD ELF sections and segments +@subsection ELF sections and segments + +The ELF ABI permits a file to have either sections or segments or both. +Relocateable object files conventionally have only sections. +Executables conventionally have both. Core files conventionally have +only program segments. + +ELF sections are similar to sections in other object file formats: they +have a name, a VMA, file contents, flags, and other miscellaneous +information. ELF relocations are stored in sections of a particular +type; BFD automatically converts these sections into internal relocation +information. + +ELF program segments are intended for fast interpretation by a system +loader. They have a type, a VMA, an LMA, file contents, and a couple of +other fields. When an ELF executable is run on a Unix system, the +system loader will examine the program segments to decide how to load +it. The loader will ignore the section information. Loadable program +segments (type @samp{PT_LOAD}) are directly loaded into memory. Other +program segments are interpreted by the loader, and generally provide +dynamic linking information. + +When an ELF file has both program segments and sections, an ELF program +segment may encompass one or more ELF sections, in the sense that the +portion of the file which corresponds to the program segment may include +the portions of the file corresponding to one or more sections. When +there is more than one section in a loadable program segment, the +relative positions of the section contents in the file must correspond +to the relative positions they should hold when the program segment is +loaded. This requirement should be obvious if you consider that the +system loader will load an entire program segment at a time. + +On a system which supports dynamic paging, such as any native Unix +system, the contents of a loadable program segment must be at the same +offset in the file as in memory, modulo the memory page size used on the +system. This is because the system loader will map the file into memory +starting at the start of a page. The system loader can easily remap +entire pages to the correct load address. However, if the contents of +the file were not correctly aligned within the page, the system loader +would have to shift the contents around within the page, which is too +expensive. For example, if the LMA of a loadable program segment is +@samp{0x40080} and the page size is @samp{0x1000}, then the position of +the segment contents within the file must equal @samp{0x80} modulo +@samp{0x1000}. + +BFD has only a single set of sections. It does not provide any generic +way to examine both sections and segments. When BFD is used to open an +object file or executable, the BFD sections will represent ELF sections. +When BFD is used to open a core file, the BFD sections will represent +ELF program segments. + +When BFD is used to examine an object file or executable, any program +segments will be read to set the LMA of the sections. This is because +ELF sections only have a VMA, while ELF program segments have both a VMA +and an LMA. Any program segments will be copied by the +@samp{copy_private} entry points. They will be printed by the +@samp{print_private} entry point. Otherwise, the program segments are +ignored. In particular, programs which use BFD currently have no direct +access to the program segments. + +When BFD is used to create an executable, the program segments will be +created automatically based on the section information. This is done in +the function @samp{assign_file_positions_for_segments} in @file{elf.c}. +This function has been tweaked many times, and probably still has +problems that arise in particular cases. + +There is a hook which may be used to explicitly define the program +segments when creating an executable: the @samp{bfd_record_phdr} +function in @file{bfd.c}. If this function is called, BFD will not +create program segments itself, but will only create the program +segments specified by the caller. The linker uses this function to +implement the @samp{PHDRS} linker script command. + +@node BFD ELF generic support +@subsection BFD ELF generic support + +In general, functions which do not read external data from the ELF file +are found in @file{elf.c}. They operate on the internal forms of the +ELF structures, which are defined in @file{include/elf/internal.h}. The +internal structures are defined in terms of @samp{bfd_vma}, and so may +be used for both 32 bit and 64 bit ELF targets. + +The file @file{elfcode.h} contains functions which operate on the +external data. @file{elfcode.h} is compiled twice, once via +@file{elf32.c} with @samp{ARCH_SIZE} defined as @samp{32}, and once via +@file{elf64.c} with @samp{ARCH_SIZE} defined as @samp{64}. +@file{elfcode.h} includes functions to swap the ELF structures in and +out of external form, as well as a few more complex functions. + +Linker support is found in @file{elflink.c} and @file{elflink.h}. The +latter file is compiled twice, for both 32 and 64 bit support. The +linker support is only used if the processor specific file defines +@samp{elf_backend_relocate_section}, which is required to relocate the +section contents. If that macro is not defined, the generic linker code +is used, and relocations are handled via @samp{bfd_perform_relocation}. + +The core file support is in @file{elfcore.h}, which is compiled twice, +for both 32 and 64 bit support. The more interesting cases of core file +support only work on a native system which has the @file{sys/procfs.h} +header file. Without that file, the core file support does little more +than read the ELF program segments as BFD sections. + +The BFD internal header file @file{elf-bfd.h} is used for communication +among these files and the processor specific files. + +The default entries for the BFD ELF target vector are found mainly in +@file{elf.c}. Some functions are found in @file{elfcode.h}. + +The processor specific files may override particular entries in the +target vector, but most do not, with one exception: the +@samp{bfd_reloc_type_lookup} entry point is always processor specific. + +@node BFD ELF processor specific support +@subsection BFD ELF processor specific support + +By convention, the processor specific support for a particular processor +will be found in @file{elf@var{nn}-@var{cpu}.c}, where @var{nn} is +either 32 or 64, and @var{cpu} is the name of the processor. + +@menu +* BFD ELF processor required:: Required processor specific support +* BFD ELF processor linker:: Processor specific linker support +* BFD ELF processor other:: Other processor specific support options +@end menu + +@node BFD ELF processor required +@subsubsection Required processor specific support + +When writing a @file{elf@var{nn}-@var{cpu}.c} file, you must do the +following: + +@itemize @bullet +@item +Define either @samp{TARGET_BIG_SYM} or @samp{TARGET_LITTLE_SYM}, or +both, to a unique C name to use for the target vector. This name should +appear in the list of target vectors in @file{targets.c}, and will also +have to appear in @file{config.bfd} and @file{configure.in}. Define +@samp{TARGET_BIG_SYM} for a big-endian processor, +@samp{TARGET_LITTLE_SYM} for a little-endian processor, and define both +for a bi-endian processor. +@item +Define either @samp{TARGET_BIG_NAME} or @samp{TARGET_LITTLE_NAME}, or +both, to a string used as the name of the target vector. This is the +name which a user of the BFD tool would use to specify the object file +format. It would normally appear in a linker emulation parameters +file. +@item +Define @samp{ELF_ARCH} to the BFD architecture (an element of the +@samp{bfd_architecture} enum, typically @samp{bfd_arch_@var{cpu}}). +@item +Define @samp{ELF_MACHINE_CODE} to the magic number which should appear +in the @samp{e_machine} field of the ELF header. As of this writing, +these magic numbers are assigned by SCO; if you want to get a magic +number for a particular processor, try sending a note to +@email{registry@@sco.com}. In the BFD sources, the magic numbers are +found in @file{include/elf/common.h}; they have names beginning with +@samp{EM_}. +@item +Define @samp{ELF_MAXPAGESIZE} to the maximum size of a virtual page in +memory. This can normally be found at the start of chapter 5 in the +processor specific supplement. For a processor which will only be used +in an embedded system, or which has no memory management hardware, this +can simply be @samp{1}. +@item +If the format should use @samp{Rel} rather than @samp{Rela} relocations, +define @samp{USE_REL}. This is normally defined in chapter 4 of the +processor specific supplement. + +In the absence of a supplement, it's easier to work with @samp{Rela} +relocations. @samp{Rela} relocations will require more space in object +files (but not in executables, except when using dynamic linking). +However, this is outweighed by the simplicity of addend handling when +using @samp{Rela} relocations. With @samp{Rel} relocations, the addend +must be stored in the section contents, which makes relocateable links +more complex. + +For example, consider C code like @code{i = a[1000];} where @samp{a} is +a global array. The instructions which load the value of @samp{a[1000]} +will most likely use a relocation which refers to the symbol +representing @samp{a}, with an addend that gives the offset from the +start of @samp{a} to element @samp{1000}. When using @samp{Rel} +relocations, that addend must be stored in the instructions themselves. +If you are adding support for a RISC chip which uses two or more +instructions to load an address, then the addend may not fit in a single +instruction, and will have to be somehow split among the instructions. +This makes linking awkward, particularly when doing a relocateable link +in which the addend may have to be updated. It can be done---the MIPS +ELF support does it---but it should be avoided when possible. + +It is possible, though somewhat awkward, to support both @samp{Rel} and +@samp{Rela} relocations for a single target; @file{elf64-mips.c} does it +by overriding the relocation reading and writing routines. +@item +Define howto structures for all the relocation types. +@item +Define a @samp{bfd_reloc_type_lookup} routine. This must be named +@samp{bfd_elf@var{nn}_bfd_reloc_type_lookup}, and may be either a +function or a macro. It must translate a BFD relocation code into a +howto structure. This is normally a table lookup or a simple switch. +@item +If using @samp{Rel} relocations, define @samp{elf_info_to_howto_rel}. +If using @samp{Rela} relocations, define @samp{elf_info_to_howto}. +Either way, this is a macro defined as the name of a function which +takes an @samp{arelent} and a @samp{Rel} or @samp{Rela} structure, and +sets the @samp{howto} field of the @samp{arelent} based on the +@samp{Rel} or @samp{Rela} structure. This is normally uses +@samp{ELF@var{nn}_R_TYPE} to get the ELF relocation type and uses it as +an index into a table of howto structures. +@end itemize + +You must also add the magic number for this processor to the +@samp{prep_headers} function in @file{elf.c}. + +You must also create a header file in the @file{include/elf} directory +called @file{@var{cpu}.h}. This file should define any target specific +information which may be needed outside of the BFD code. In particular +it should use the @samp{START_RELOC_NUMBERS}, @samp{RELOC_NUMBER}, +@samp{FAKE_RELOC}, @samp{EMPTY_RELOC} and @samp{END_RELOC_NUMBERS} +macros to create a table mapping the number used to indentify a +relocation to a name describing that relocation. + +@node BFD ELF processor linker +@subsubsection Processor specific linker support + +The linker will be much more efficient if you define a relocate section +function. This will permit BFD to use the ELF specific linker support. + +If you do not define a relocate section function, BFD must use the +generic linker support, which requires converting all symbols and +relocations into BFD @samp{asymbol} and @samp{arelent} structures. In +this case, relocations will be handled by calling +@samp{bfd_perform_relocation}, which will use the howto structures you +have defined. @xref{BFD relocation handling}. + +In order to support linking into a different object file format, such as +S-records, @samp{bfd_perform_relocation} must work correctly with your +howto structures, so you can't skip that step. However, if you define +the relocate section function, then in the normal case of linking into +an ELF file the linker will not need to convert symbols and relocations, +and will be much more efficient. + +To use a relocation section function, define the macro +@samp{elf_backend_relocate_section} as the name of a function which will +take the contents of a section, as well as relocation, symbol, and other +information, and modify the section contents according to the relocation +information. In simple cases, this is little more than a loop over the +relocations which computes the value of each relocation and calls +@samp{_bfd_final_link_relocate}. The function must check for a +relocateable link, and in that case normally needs to do nothing other +than adjust the addend for relocations against a section symbol. + +The complex cases generally have to do with dynamic linker support. GOT +and PLT relocations must be handled specially, and the linker normally +arranges to set up the GOT and PLT sections while handling relocations. +When generating a shared library, random relocations must normally be +copied into the shared library, or converted to RELATIVE relocations +when possible. + +@node BFD ELF processor other +@subsubsection Other processor specific support options + +There are many other macros which may be defined in +@file{elf@var{nn}-@var{cpu}.c}. These macros may be found in +@file{elfxx-target.h}. + +Macros may be used to override some of the generic ELF target vector +functions. + +Several processor specific hook functions which may be defined as +macros. These functions are found as function pointers in the +@samp{elf_backend_data} structure defined in @file{elf-bfd.h}. In +general, a hook function is set by defining a macro +@samp{elf_backend_@var{name}}. + +There are a few processor specific constants which may also be defined. +These are again found in the @samp{elf_backend_data} structure. + +I will not define the various functions and constants here; see the +comments in @file{elf-bfd.h}. + +Normally any odd characteristic of a particular ELF processor is handled +via a hook function. For example, the special @samp{SHN_MIPS_SCOMMON} +section number found in MIPS ELF is handled via the hooks +@samp{section_from_bfd_section}, @samp{symbol_processing}, +@samp{add_symbol_hook}, and @samp{output_symbol_hook}. + +Dynamic linking support, which involves processor specific relocations +requiring special handling, is also implemented via hook functions. + +@node BFD ELF core files +@subsection BFD ELF core files +@cindex elf core files + +On native ELF Unix systems, core files are generated without any +sections. Instead, they only have program segments. + +When BFD is used to read an ELF core file, the BFD sections will +actually represent program segments. Since ELF program segments do not +have names, BFD will invent names like @samp{segment@var{n}} where +@var{n} is a number. + +A single ELF program segment may include both an initialized part and an +uninitialized part. The size of the initialized part is given by the +@samp{p_filesz} field. The total size of the segment is given by the +@samp{p_memsz} field. If @samp{p_memsz} is larger than @samp{p_filesz}, +then the extra space is uninitialized, or, more precisely, initialized +to zero. + +BFD will represent such a program segment as two different sections. +The first, named @samp{segment@var{n}a}, will represent the initialized +part of the program segment. The second, named @samp{segment@var{n}b}, +will represent the uninitialized part. + +ELF core files store special information such as register values in +program segments with the type @samp{PT_NOTE}. BFD will attempt to +interpret the information in these segments, and will create additional +sections holding the information. Some of this interpretation requires +information found in the host header file @file{sys/procfs.h}, and so +will only work when BFD is built on a native system. + +BFD does not currently provide any way to create an ELF core file. In +general, BFD does not provide a way to create core files. The way to +implement this would be to write @samp{bfd_set_format} and +@samp{bfd_write_contents} routines for the @samp{bfd_core} type; see +@ref{BFD target vector format}. + +@node BFD ELF future +@subsection BFD ELF future + +The current dynamic linking support has too much code duplication. +While each processor has particular differences, much of the dynamic +linking support is quite similar for each processor. The GOT and PLT +are handled in fairly similar ways, the details of -Bsymbolic linking +are generally similar, etc. This code should be reworked to use more +generic functions, eliminating the duplication. + +Similarly, the relocation handling has too much duplication. Many of +the @samp{reloc_type_lookup} and @samp{info_to_howto} functions are +quite similar. The relocate section functions are also often quite +similar, both in the standard linker handling and the dynamic linker +handling. Many of the COFF processor specific backends share a single +relocate section function (@samp{_bfd_coff_generic_relocate_section}), +and it should be possible to do something like this for the ELF targets +as well. + +The appearance of the processor specific magic number in +@samp{prep_headers} in @file{elf.c} is somewhat bogus. It should be +possible to add support for a new processor without changing the generic +support. + +The processor function hooks and constants are ad hoc and need better +documentation. + +When a linker script uses @samp{SIZEOF_HEADERS}, the ELF backend must +guess at the number of program segments which will be required, in +@samp{get_program_header_size}. This is because the linker calls +@samp{bfd_sizeof_headers} before it knows all the section addresses and +sizes. The ELF backend may later discover, when creating program +segments, that more program segments are required. This is currently +reported as an error in @samp{assign_file_positions_for_segments}. + +In practice this makes it difficult to use @samp{SIZEOF_HEADERS} except +with a carefully defined linker script. Unfortunately, +@samp{SIZEOF_HEADERS} is required for fast program loading on a native +system, since it permits the initial code section to appear on the same +page as the program segments, saving a page read when the program starts +running. Fortunately, native systems permit careful definition of the +linker script. Still, ideally it would be possible to use relaxation to +compute the number of program segments. + +@node BFD glossary +@section BFD glossary +@cindex glossary for bfd +@cindex bfd glossary + +This is a short glossary of some BFD terms. + +@table @asis +@item a.out +The a.out object file format. The original Unix object file format. +Still used on SunOS, though not Solaris. Supports only three sections. + +@item archive +A collection of object files produced and manipulated by the @samp{ar} +program. + +@item backend +The implementation within BFD of a particular object file format. The +set of functions which appear in a particular target vector. + +@item BFD +The BFD library itself. Also, each object file, archive, or exectable +opened by the BFD library has the type @samp{bfd *}, and is sometimes +referred to as a bfd. + +@item COFF +The Common Object File Format. Used on Unix SVR3. Used by some +embedded targets, although ELF is normally better. + +@item DLL +A shared library on Windows. + +@item dynamic linker +When a program linked against a shared library is run, the dynamic +linker will locate the appropriate shared library and arrange to somehow +include it in the running image. + +@item dynamic object +Another name for an ELF shared library. + +@item ECOFF +The Extended Common Object File Format. Used on Alpha Digital Unix +(formerly OSF/1), as well as Ultrix and Irix 4. A variant of COFF. + +@item ELF +The Executable and Linking Format. The object file format used on most +modern Unix systems, including GNU/Linux, Solaris, Irix, and SVR4. Also +used on many embedded systems. + +@item executable +A program, with instructions and symbols, and perhaps dynamic linking +information. Normally produced by a linker. + +@item LMA +Load Memory Address. This is the address at which a section will be +loaded. Compare with VMA, below. + +@item NLM +NetWare Loadable Module. Used to describe the format of an object which +be loaded into NetWare, which is some kind of PC based network server +program. + +@item object file +A binary file including machine instructions, symbols, and relocation +information. Normally produced by an assembler. + +@item object file format +The format of an object file. Typically object files and executables +for a particular system are in the same format, although executables +will not contain any relocation information. + +@item PE +The Portable Executable format. This is the object file format used for +Windows (specifically, Win32) object files. It is based closely on +COFF, but has a few significant differences. + +@item PEI +The Portable Executable Image format. This is the object file format +used for Windows (specifically, Win32) executables. It is very similar +to PE, but includes some additional header information. + +@item relocations +Information used by the linker to adjust section contents. Also called +relocs. + +@item section +Object files and executable are composed of sections. Sections have +optional data and optional relocation information. + +@item shared library +A library of functions which may be used by many executables without +actually being linked into each executable. There are several different +implementations of shared libraries, each having slightly different +features. + +@item symbol +Each object file and executable may have a list of symbols, often +referred to as the symbol table. A symbol is basically a name and an +address. There may also be some additional information like the type of +symbol, although the type of a symbol is normally something simple like +function or object, and should be confused with the more complex C +notion of type. Typically every global function and variable in a C +program will have an associated symbol. + +@item target vector +A set of functions which implement support for a particular object file +format. The @samp{bfd_target} structure. + +@item Win32 +The current Windows API, implemented by Windows 95 and later and Windows +NT 3.51 and later, but not by Windows 3.1. + +@item XCOFF +The eXtended Common Object File Format. Used on AIX. A variant of +COFF, with a completely different symbol table implementation. + +@item VMA +Virtual Memory Address. This is the address a section will have when +an executable is run. Compare with LMA, above. +@end table + +@node Index +@unnumberedsec Index +@printindex cp + +@contents +@bye -- cgit v1.1