From d2a1eec363c6b2681c6551d898da36ed25869c92 Mon Sep 17 00:00:00 2001 From: nectar Date: Fri, 30 Aug 2002 21:37:10 +0000 Subject: Remove some parts of the Heimdal distribution which we do not use and have never used. --- crypto/heimdal/appl/dceutils/ChangeLog | 27 - crypto/heimdal/appl/dceutils/Makefile | 620 ------ crypto/heimdal/appl/dceutils/Makefile.am | 30 - crypto/heimdal/appl/dceutils/Makefile.in | 620 ------ crypto/heimdal/appl/dceutils/README.dcedfs | 59 - crypto/heimdal/appl/dceutils/README.original | 335 --- crypto/heimdal/appl/dceutils/dfspag.exp | 3 - crypto/heimdal/appl/dceutils/dpagaix.c | 23 - crypto/heimdal/appl/dceutils/k5dce.h | 165 -- crypto/heimdal/appl/dceutils/k5dcecon.c | 791 ------- crypto/heimdal/appl/dceutils/testpag.c | 150 -- crypto/heimdal/appl/kx/ChangeLog | 354 --- crypto/heimdal/appl/kx/Makefile | 825 ------- crypto/heimdal/appl/kx/Makefile.am | 73 - crypto/heimdal/appl/kx/Makefile.in | 825 ------- crypto/heimdal/appl/kx/common.c | 812 ------- crypto/heimdal/appl/kx/context.c | 92 - crypto/heimdal/appl/kx/krb4.c | 361 ---- crypto/heimdal/appl/kx/krb5.c | 419 ---- crypto/heimdal/appl/kx/kx.1 | 62 - crypto/heimdal/appl/kx/kx.c | 765 ------- crypto/heimdal/appl/kx/kx.cat1 | 38 - crypto/heimdal/appl/kx/kx.h | 263 --- crypto/heimdal/appl/kx/kxd.8 | 53 - crypto/heimdal/appl/kx/kxd.c | 754 ------- crypto/heimdal/appl/kx/kxd.cat8 | 36 - crypto/heimdal/appl/kx/rxtelnet.1 | 94 - crypto/heimdal/appl/kx/rxtelnet.cat1 | 48 - crypto/heimdal/appl/kx/rxtelnet.in | 67 - crypto/heimdal/appl/kx/rxterm.1 | 90 - crypto/heimdal/appl/kx/rxterm.cat1 | 46 - crypto/heimdal/appl/kx/rxterm.in | 45 - crypto/heimdal/appl/kx/tenletxr.1 | 61 - crypto/heimdal/appl/kx/tenletxr.cat1 | 36 - crypto/heimdal/appl/kx/tenletxr.in | 37 - crypto/heimdal/appl/kx/writeauth.c | 73 - crypto/heimdal/appl/otp/ChangeLog | 40 - crypto/heimdal/appl/otp/Makefile | 649 ------ crypto/heimdal/appl/otp/Makefile.am | 15 - crypto/heimdal/appl/otp/Makefile.in | 649 ------ crypto/heimdal/appl/otp/otp.1 | 60 - crypto/heimdal/appl/otp/otp.c | 366 ---- crypto/heimdal/appl/otp/otp.cat1 | 42 - crypto/heimdal/appl/otp/otp_locl.h | 60 - crypto/heimdal/appl/otp/otpprint.1 | 52 - crypto/heimdal/appl/otp/otpprint.c | 135 -- crypto/heimdal/appl/otp/otpprint.cat1 | 35 - crypto/heimdal/appl/popper/ChangeLog | 197 -- crypto/heimdal/appl/popper/Makefile | 688 ------ crypto/heimdal/appl/popper/Makefile.am | 31 - crypto/heimdal/appl/popper/Makefile.in | 688 ------ crypto/heimdal/appl/popper/README | 381 ---- crypto/heimdal/appl/popper/README-FIRST | 11 - crypto/heimdal/appl/popper/README-KRB4 | 3 - crypto/heimdal/appl/popper/maildir.c | 216 -- crypto/heimdal/appl/popper/pop3.rfc1081 | 898 -------- crypto/heimdal/appl/popper/pop3e.rfc1082 | 619 ------ crypto/heimdal/appl/popper/pop_auth.c | 220 -- crypto/heimdal/appl/popper/pop_debug.c | 284 --- crypto/heimdal/appl/popper/pop_dele.c | 107 - crypto/heimdal/appl/popper/pop_dropcopy.c | 174 -- crypto/heimdal/appl/popper/pop_dropinfo.c | 232 -- crypto/heimdal/appl/popper/pop_get_command.c | 153 -- crypto/heimdal/appl/popper/pop_init.c | 398 ---- crypto/heimdal/appl/popper/pop_last.c | 18 - crypto/heimdal/appl/popper/pop_list.c | 59 - crypto/heimdal/appl/popper/pop_log.c | 36 - crypto/heimdal/appl/popper/pop_msg.c | 57 - crypto/heimdal/appl/popper/pop_parse.c | 55 - crypto/heimdal/appl/popper/pop_pass.c | 220 -- crypto/heimdal/appl/popper/pop_quit.c | 21 - crypto/heimdal/appl/popper/pop_rset.c | 33 - crypto/heimdal/appl/popper/pop_send.c | 176 -- crypto/heimdal/appl/popper/pop_stat.c | 26 - crypto/heimdal/appl/popper/pop_uidl.c | 88 - crypto/heimdal/appl/popper/pop_updt.c | 199 -- crypto/heimdal/appl/popper/pop_user.c | 36 - crypto/heimdal/appl/popper/pop_xover.c | 37 - crypto/heimdal/appl/popper/popper.8 | 90 - crypto/heimdal/appl/popper/popper.README.release | 45 - crypto/heimdal/appl/popper/popper.c | 116 - crypto/heimdal/appl/popper/popper.h | 352 --- crypto/heimdal/appl/popper/version.h | 19 - crypto/heimdal/appl/xnlock/ChangeLog | 76 - crypto/heimdal/appl/xnlock/Makefile | 659 ------ crypto/heimdal/appl/xnlock/Makefile.am | 30 - crypto/heimdal/appl/xnlock/Makefile.in | 659 ------ crypto/heimdal/appl/xnlock/README | 21 - crypto/heimdal/appl/xnlock/nose.0.left | 38 - crypto/heimdal/appl/xnlock/nose.0.right | 38 - crypto/heimdal/appl/xnlock/nose.1.left | 38 - crypto/heimdal/appl/xnlock/nose.1.right | 38 - crypto/heimdal/appl/xnlock/nose.down | 38 - crypto/heimdal/appl/xnlock/nose.front | 38 - crypto/heimdal/appl/xnlock/nose.left.front | 38 - crypto/heimdal/appl/xnlock/nose.right.front | 38 - crypto/heimdal/appl/xnlock/xnlock.1 | 123 -- crypto/heimdal/appl/xnlock/xnlock.c | 1135 ---------- crypto/heimdal/appl/xnlock/xnlock.cat1 | 123 -- crypto/heimdal/lib/editline/ChangeLog | 108 - crypto/heimdal/lib/editline/Makefile | 730 ------- crypto/heimdal/lib/editline/Makefile.am | 53 - crypto/heimdal/lib/editline/Makefile.in | 730 ------- crypto/heimdal/lib/editline/README | 45 - crypto/heimdal/lib/editline/complete.c | 243 --- crypto/heimdal/lib/editline/edit_compat.c | 120 -- crypto/heimdal/lib/editline/edit_compat.h | 44 - crypto/heimdal/lib/editline/editline.3 | 175 -- crypto/heimdal/lib/editline/editline.c | 1376 ------------ crypto/heimdal/lib/editline/editline.cat3 | 141 -- crypto/heimdal/lib/editline/editline.h | 64 - crypto/heimdal/lib/editline/roken_rename.h | 61 - crypto/heimdal/lib/editline/sysunix.c | 92 - crypto/heimdal/lib/editline/testit.c | 78 - crypto/heimdal/lib/editline/unix.h | 22 - crypto/heimdal/lib/otp/ChangeLog | 85 - crypto/heimdal/lib/otp/Makefile | 682 ------ crypto/heimdal/lib/otp/Makefile.am | 58 - crypto/heimdal/lib/otp/Makefile.in | 682 ------ crypto/heimdal/lib/otp/otp.c | 63 - crypto/heimdal/lib/otp/otp.h | 101 - crypto/heimdal/lib/otp/otp_challenge.c | 69 - crypto/heimdal/lib/otp/otp_db.c | 233 -- crypto/heimdal/lib/otp/otp_locl.h | 70 - crypto/heimdal/lib/otp/otp_md.c | 274 --- crypto/heimdal/lib/otp/otp_md.h | 46 - crypto/heimdal/lib/otp/otp_parse.c | 2515 ---------------------- crypto/heimdal/lib/otp/otp_print.c | 99 - crypto/heimdal/lib/otp/otp_verify.c | 78 - crypto/heimdal/lib/otp/otptest.c | 145 -- crypto/heimdal/lib/otp/roken_rename.h | 67 - 131 files changed, 30717 deletions(-) delete mode 100644 crypto/heimdal/appl/dceutils/ChangeLog delete mode 100644 crypto/heimdal/appl/dceutils/Makefile delete mode 100644 crypto/heimdal/appl/dceutils/Makefile.am delete mode 100644 crypto/heimdal/appl/dceutils/Makefile.in delete mode 100644 crypto/heimdal/appl/dceutils/README.dcedfs delete mode 100644 crypto/heimdal/appl/dceutils/README.original delete mode 100644 crypto/heimdal/appl/dceutils/dfspag.exp delete mode 100644 crypto/heimdal/appl/dceutils/dpagaix.c delete mode 100644 crypto/heimdal/appl/dceutils/k5dce.h delete mode 100644 crypto/heimdal/appl/dceutils/k5dcecon.c delete mode 100644 crypto/heimdal/appl/dceutils/testpag.c delete mode 100644 crypto/heimdal/appl/kx/ChangeLog delete mode 100644 crypto/heimdal/appl/kx/Makefile delete mode 100644 crypto/heimdal/appl/kx/Makefile.am delete mode 100644 crypto/heimdal/appl/kx/Makefile.in delete mode 100644 crypto/heimdal/appl/kx/common.c delete mode 100644 crypto/heimdal/appl/kx/context.c delete mode 100644 crypto/heimdal/appl/kx/krb4.c delete mode 100644 crypto/heimdal/appl/kx/krb5.c delete mode 100644 crypto/heimdal/appl/kx/kx.1 delete mode 100644 crypto/heimdal/appl/kx/kx.c delete mode 100644 crypto/heimdal/appl/kx/kx.cat1 delete mode 100644 crypto/heimdal/appl/kx/kx.h delete mode 100644 crypto/heimdal/appl/kx/kxd.8 delete mode 100644 crypto/heimdal/appl/kx/kxd.c delete mode 100644 crypto/heimdal/appl/kx/kxd.cat8 delete mode 100644 crypto/heimdal/appl/kx/rxtelnet.1 delete mode 100644 crypto/heimdal/appl/kx/rxtelnet.cat1 delete mode 100644 crypto/heimdal/appl/kx/rxtelnet.in delete mode 100644 crypto/heimdal/appl/kx/rxterm.1 delete mode 100644 crypto/heimdal/appl/kx/rxterm.cat1 delete mode 100644 crypto/heimdal/appl/kx/rxterm.in delete mode 100644 crypto/heimdal/appl/kx/tenletxr.1 delete mode 100644 crypto/heimdal/appl/kx/tenletxr.cat1 delete mode 100644 crypto/heimdal/appl/kx/tenletxr.in delete mode 100644 crypto/heimdal/appl/kx/writeauth.c delete mode 100644 crypto/heimdal/appl/otp/ChangeLog delete mode 100644 crypto/heimdal/appl/otp/Makefile delete mode 100644 crypto/heimdal/appl/otp/Makefile.am delete mode 100644 crypto/heimdal/appl/otp/Makefile.in delete mode 100644 crypto/heimdal/appl/otp/otp.1 delete mode 100644 crypto/heimdal/appl/otp/otp.c delete mode 100644 crypto/heimdal/appl/otp/otp.cat1 delete mode 100644 crypto/heimdal/appl/otp/otp_locl.h delete mode 100644 crypto/heimdal/appl/otp/otpprint.1 delete mode 100644 crypto/heimdal/appl/otp/otpprint.c delete mode 100644 crypto/heimdal/appl/otp/otpprint.cat1 delete mode 100644 crypto/heimdal/appl/popper/ChangeLog delete mode 100644 crypto/heimdal/appl/popper/Makefile delete mode 100644 crypto/heimdal/appl/popper/Makefile.am delete mode 100644 crypto/heimdal/appl/popper/Makefile.in delete mode 100644 crypto/heimdal/appl/popper/README delete mode 100644 crypto/heimdal/appl/popper/README-FIRST delete mode 100644 crypto/heimdal/appl/popper/README-KRB4 delete mode 100644 crypto/heimdal/appl/popper/maildir.c delete mode 100644 crypto/heimdal/appl/popper/pop3.rfc1081 delete mode 100644 crypto/heimdal/appl/popper/pop3e.rfc1082 delete mode 100644 crypto/heimdal/appl/popper/pop_auth.c delete mode 100644 crypto/heimdal/appl/popper/pop_debug.c delete mode 100644 crypto/heimdal/appl/popper/pop_dele.c delete mode 100644 crypto/heimdal/appl/popper/pop_dropcopy.c delete mode 100644 crypto/heimdal/appl/popper/pop_dropinfo.c delete mode 100644 crypto/heimdal/appl/popper/pop_get_command.c delete mode 100644 crypto/heimdal/appl/popper/pop_init.c delete mode 100644 crypto/heimdal/appl/popper/pop_last.c delete mode 100644 crypto/heimdal/appl/popper/pop_list.c delete mode 100644 crypto/heimdal/appl/popper/pop_log.c delete mode 100644 crypto/heimdal/appl/popper/pop_msg.c delete mode 100644 crypto/heimdal/appl/popper/pop_parse.c delete mode 100644 crypto/heimdal/appl/popper/pop_pass.c delete mode 100644 crypto/heimdal/appl/popper/pop_quit.c delete mode 100644 crypto/heimdal/appl/popper/pop_rset.c delete mode 100644 crypto/heimdal/appl/popper/pop_send.c delete mode 100644 crypto/heimdal/appl/popper/pop_stat.c delete mode 100644 crypto/heimdal/appl/popper/pop_uidl.c delete mode 100644 crypto/heimdal/appl/popper/pop_updt.c delete mode 100644 crypto/heimdal/appl/popper/pop_user.c delete mode 100644 crypto/heimdal/appl/popper/pop_xover.c delete mode 100644 crypto/heimdal/appl/popper/popper.8 delete mode 100644 crypto/heimdal/appl/popper/popper.README.release delete mode 100644 crypto/heimdal/appl/popper/popper.c delete mode 100644 crypto/heimdal/appl/popper/popper.h delete mode 100644 crypto/heimdal/appl/popper/version.h delete mode 100644 crypto/heimdal/appl/xnlock/ChangeLog delete mode 100644 crypto/heimdal/appl/xnlock/Makefile delete mode 100644 crypto/heimdal/appl/xnlock/Makefile.am delete mode 100644 crypto/heimdal/appl/xnlock/Makefile.in delete mode 100644 crypto/heimdal/appl/xnlock/README delete mode 100644 crypto/heimdal/appl/xnlock/nose.0.left delete mode 100644 crypto/heimdal/appl/xnlock/nose.0.right delete mode 100644 crypto/heimdal/appl/xnlock/nose.1.left delete mode 100644 crypto/heimdal/appl/xnlock/nose.1.right delete mode 100644 crypto/heimdal/appl/xnlock/nose.down delete mode 100644 crypto/heimdal/appl/xnlock/nose.front delete mode 100644 crypto/heimdal/appl/xnlock/nose.left.front delete mode 100644 crypto/heimdal/appl/xnlock/nose.right.front delete mode 100644 crypto/heimdal/appl/xnlock/xnlock.1 delete mode 100644 crypto/heimdal/appl/xnlock/xnlock.c delete mode 100644 crypto/heimdal/appl/xnlock/xnlock.cat1 delete mode 100644 crypto/heimdal/lib/editline/ChangeLog delete mode 100644 crypto/heimdal/lib/editline/Makefile delete mode 100644 crypto/heimdal/lib/editline/Makefile.am delete mode 100644 crypto/heimdal/lib/editline/Makefile.in delete mode 100644 crypto/heimdal/lib/editline/README delete mode 100644 crypto/heimdal/lib/editline/complete.c delete mode 100644 crypto/heimdal/lib/editline/edit_compat.c delete mode 100644 crypto/heimdal/lib/editline/edit_compat.h delete mode 100644 crypto/heimdal/lib/editline/editline.3 delete mode 100644 crypto/heimdal/lib/editline/editline.c delete mode 100644 crypto/heimdal/lib/editline/editline.cat3 delete mode 100644 crypto/heimdal/lib/editline/editline.h delete mode 100644 crypto/heimdal/lib/editline/roken_rename.h delete mode 100644 crypto/heimdal/lib/editline/sysunix.c delete mode 100644 crypto/heimdal/lib/editline/testit.c delete mode 100644 crypto/heimdal/lib/editline/unix.h delete mode 100644 crypto/heimdal/lib/otp/ChangeLog delete mode 100644 crypto/heimdal/lib/otp/Makefile delete mode 100644 crypto/heimdal/lib/otp/Makefile.am delete mode 100644 crypto/heimdal/lib/otp/Makefile.in delete mode 100644 crypto/heimdal/lib/otp/otp.c delete mode 100644 crypto/heimdal/lib/otp/otp.h delete mode 100644 crypto/heimdal/lib/otp/otp_challenge.c delete mode 100644 crypto/heimdal/lib/otp/otp_db.c delete mode 100644 crypto/heimdal/lib/otp/otp_locl.h delete mode 100644 crypto/heimdal/lib/otp/otp_md.c delete mode 100644 crypto/heimdal/lib/otp/otp_md.h delete mode 100644 crypto/heimdal/lib/otp/otp_parse.c delete mode 100644 crypto/heimdal/lib/otp/otp_print.c delete mode 100644 crypto/heimdal/lib/otp/otp_verify.c delete mode 100644 crypto/heimdal/lib/otp/otptest.c delete mode 100644 crypto/heimdal/lib/otp/roken_rename.h diff --git a/crypto/heimdal/appl/dceutils/ChangeLog b/crypto/heimdal/appl/dceutils/ChangeLog deleted file mode 100644 index f8925c8..0000000 --- a/crypto/heimdal/appl/dceutils/ChangeLog +++ /dev/null @@ -1,27 +0,0 @@ -2002-08-12 Johan Danielsson - - * Makefile.am: rename dpagaix_LDFLAGS etc to appease automake - -2001-08-24 Assar Westerlund - - * Makefile.am (dpagaix): make sure of using $(EXEEXT) just to - please automake (this is aix-only code) - -2001-02-07 Assar Westerlund - - * Makefile.am (dpagaix): needs to be linked with ld, add an - explicit command for it. from Ake Sandgren - -2000-10-02 Assar Westerlund - - * Makefile.am: link with roken on everything except irix, where - apperently it fails. reported by Ake Sandgren - -2000-07-17 Johan Danielsson - - * Makefile.am: set compiler flags - -2000-07-01 Assar Westerlund - - * imported stuff from Ake Sandgren - diff --git a/crypto/heimdal/appl/dceutils/Makefile b/crypto/heimdal/appl/dceutils/Makefile deleted file mode 100644 index d24aba2..0000000 --- a/crypto/heimdal/appl/dceutils/Makefile +++ /dev/null @@ -1,620 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# appl/dceutils/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.8 2002/08/12 15:03:43 joda Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -DFSPROGS = k5dcecon -#AIX_DFSPROGS = dpagaix - -libexec_PROGRAMS = $(DFSPROGS) $(AIX_DFSPROGS) - -dpagaix_CFLAGS = $(dpagaix_cflags) -dpagaix_LDFLAGS = $(dpagaix_ldflags) -dpagaix_LDADD = $(dpagaix_ldadd) - -LIB_dce = -ldce - -k5dcecon_SOURCES = k5dcecon.c k5dce.h - -dpagaix_SOURCES = dpagaix.c - -#LDADD = $(LIB_dce) -LDADD = $(LIB_roken) $(LIB_dce) -subdir = appl/dceutils -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -#libexec_PROGRAMS = k5dcecon$(EXEEXT) dpagaix$(EXEEXT) -libexec_PROGRAMS = k5dcecon$(EXEEXT) -PROGRAMS = $(libexec_PROGRAMS) - -am_dpagaix_OBJECTS = dpagaix-dpagaix.$(OBJEXT) -dpagaix_OBJECTS = $(am_dpagaix_OBJECTS) -dpagaix_DEPENDENCIES = -am_k5dcecon_OBJECTS = k5dcecon.$(OBJEXT) -k5dcecon_OBJECTS = $(am_k5dcecon_OBJECTS) -k5dcecon_LDADD = $(LDADD) -#k5dcecon_DEPENDENCIES = -k5dcecon_DEPENDENCIES = -k5dcecon_LDFLAGS = - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = $(dpagaix_SOURCES) $(k5dcecon_SOURCES) -DIST_COMMON = ChangeLog Makefile.am Makefile.in -SOURCES = $(dpagaix_SOURCES) $(k5dcecon_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/dceutils/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f; \ - else :; fi; \ - done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(libexecdir)/$$f"; \ - rm -f $(DESTDIR)$(libexecdir)/$$f; \ - done - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -dpagaix-dpagaix.$(OBJEXT): dpagaix.c -k5dcecon$(EXEEXT): $(k5dcecon_OBJECTS) $(k5dcecon_DEPENDENCIES) - @rm -f k5dcecon$(EXEEXT) - $(LINK) $(k5dcecon_LDFLAGS) $(k5dcecon_OBJECTS) $(k5dcecon_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -dpagaix-dpagaix.o: dpagaix.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpagaix_CFLAGS) $(CFLAGS) -c -o dpagaix-dpagaix.o `test -f 'dpagaix.c' || echo '$(srcdir)/'`dpagaix.c - -dpagaix-dpagaix.obj: dpagaix.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpagaix_CFLAGS) $(CFLAGS) -c -o dpagaix-dpagaix.obj `cygpath -w dpagaix.c` - -dpagaix-dpagaix.lo: dpagaix.c - $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpagaix_CFLAGS) $(CFLAGS) -c -o dpagaix-dpagaix.lo `test -f 'dpagaix.c' || echo '$(srcdir)/'`dpagaix.c - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local - -install-exec-am: install-libexecPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-libexecPROGRAMS - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-generic clean-libexecPROGRAMS clean-libtool distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-data-local \ - install-exec install-exec-am install-info install-info-am \ - install-libexecPROGRAMS install-man install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-libexecPROGRAMS - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -dpagaix$(EXEEXT): $(dpagaix_OBJECTS) - ld -edpagaix -o dpagaix$(EXEEXT) $(dpagaix_OBJECTS) $(srcdir)/dfspag.exp -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/dceutils/Makefile.am b/crypto/heimdal/appl/dceutils/Makefile.am deleted file mode 100644 index bf79520..0000000 --- a/crypto/heimdal/appl/dceutils/Makefile.am +++ /dev/null @@ -1,30 +0,0 @@ -# $Id: Makefile.am,v 1.8 2002/08/12 15:03:43 joda Exp $ - -include $(top_srcdir)/Makefile.am.common - - -DFSPROGS = k5dcecon -if AIX -AIX_DFSPROGS = dpagaix -endif - -libexec_PROGRAMS = $(DFSPROGS) $(AIX_DFSPROGS) - -dpagaix_CFLAGS = $(dpagaix_cflags) -dpagaix_LDFLAGS = $(dpagaix_ldflags) -dpagaix_LDADD = $(dpagaix_ldadd) - -dpagaix$(EXEEXT): $(dpagaix_OBJECTS) - ld -edpagaix -o dpagaix$(EXEEXT) $(dpagaix_OBJECTS) $(srcdir)/dfspag.exp - -LIB_dce = -ldce - -k5dcecon_SOURCES = k5dcecon.c k5dce.h - -dpagaix_SOURCES = dpagaix.c - -if IRIX -LDADD = $(LIB_dce) -else -LDADD = $(LIB_roken) $(LIB_dce) -endif diff --git a/crypto/heimdal/appl/dceutils/Makefile.in b/crypto/heimdal/appl/dceutils/Makefile.in deleted file mode 100644 index 5da1f32..0000000 --- a/crypto/heimdal/appl/dceutils/Makefile.in +++ /dev/null @@ -1,620 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.8 2002/08/12 15:03:43 joda Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ -WFLAGS = @WFLAGS@ -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -DFSPROGS = k5dcecon -@AIX_TRUE@AIX_DFSPROGS = dpagaix - -libexec_PROGRAMS = $(DFSPROGS) $(AIX_DFSPROGS) - -dpagaix_CFLAGS = $(dpagaix_cflags) -dpagaix_LDFLAGS = $(dpagaix_ldflags) -dpagaix_LDADD = $(dpagaix_ldadd) - -LIB_dce = -ldce - -k5dcecon_SOURCES = k5dcecon.c k5dce.h - -dpagaix_SOURCES = dpagaix.c - -@IRIX_TRUE@LDADD = $(LIB_dce) -@IRIX_FALSE@LDADD = $(LIB_roken) $(LIB_dce) -subdir = appl/dceutils -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -@AIX_TRUE@libexec_PROGRAMS = k5dcecon$(EXEEXT) dpagaix$(EXEEXT) -@AIX_FALSE@libexec_PROGRAMS = k5dcecon$(EXEEXT) -PROGRAMS = $(libexec_PROGRAMS) - -am_dpagaix_OBJECTS = dpagaix-dpagaix.$(OBJEXT) -dpagaix_OBJECTS = $(am_dpagaix_OBJECTS) -dpagaix_DEPENDENCIES = -am_k5dcecon_OBJECTS = k5dcecon.$(OBJEXT) -k5dcecon_OBJECTS = $(am_k5dcecon_OBJECTS) -k5dcecon_LDADD = $(LDADD) -@IRIX_TRUE@k5dcecon_DEPENDENCIES = -@IRIX_FALSE@k5dcecon_DEPENDENCIES = -k5dcecon_LDFLAGS = - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = $(dpagaix_SOURCES) $(k5dcecon_SOURCES) -DIST_COMMON = ChangeLog Makefile.am Makefile.in -SOURCES = $(dpagaix_SOURCES) $(k5dcecon_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/dceutils/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f; \ - else :; fi; \ - done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(libexecdir)/$$f"; \ - rm -f $(DESTDIR)$(libexecdir)/$$f; \ - done - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -dpagaix-dpagaix.$(OBJEXT): dpagaix.c -k5dcecon$(EXEEXT): $(k5dcecon_OBJECTS) $(k5dcecon_DEPENDENCIES) - @rm -f k5dcecon$(EXEEXT) - $(LINK) $(k5dcecon_LDFLAGS) $(k5dcecon_OBJECTS) $(k5dcecon_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -dpagaix-dpagaix.o: dpagaix.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpagaix_CFLAGS) $(CFLAGS) -c -o dpagaix-dpagaix.o `test -f 'dpagaix.c' || echo '$(srcdir)/'`dpagaix.c - -dpagaix-dpagaix.obj: dpagaix.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpagaix_CFLAGS) $(CFLAGS) -c -o dpagaix-dpagaix.obj `cygpath -w dpagaix.c` - -dpagaix-dpagaix.lo: dpagaix.c - $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(dpagaix_CFLAGS) $(CFLAGS) -c -o dpagaix-dpagaix.lo `test -f 'dpagaix.c' || echo '$(srcdir)/'`dpagaix.c - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ - mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local - -install-exec-am: install-libexecPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-libexecPROGRAMS - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-generic clean-libexecPROGRAMS clean-libtool distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-data-local \ - install-exec install-exec-am install-info install-info-am \ - install-libexecPROGRAMS install-man install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-libexecPROGRAMS - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -dpagaix$(EXEEXT): $(dpagaix_OBJECTS) - ld -edpagaix -o dpagaix$(EXEEXT) $(dpagaix_OBJECTS) $(srcdir)/dfspag.exp -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/dceutils/README.dcedfs b/crypto/heimdal/appl/dceutils/README.dcedfs deleted file mode 100644 index 80a06fe..0000000 --- a/crypto/heimdal/appl/dceutils/README.dcedfs +++ /dev/null @@ -1,59 +0,0 @@ -This is a set of patches and files to get a DFS ticket from a k5 ticket. -This code comes from Doug Engert, Argonne Nat. Lab (See dce/README.original -for more info) - -The files in dce are; -testpag: for testing if this is at all possible. -k5dfspag: included in libkrb5 -k5dcecon: Creates (or searches for) the actual DFSPAG ticketfile. -dpagaix: An AIX syscall stub. -README.original: Original README file from Doug Engert - - -Certain applications (rshd/telnetd) have been patched to call the -functions in k5dfspag when the situation is right. They are ifdef -with DCE. The patches are also originally from Doug but they -where against MIT krb5 code and have been merged into heimdal by me. -I will try to fix ftpd soon... - -There is also an ifdefs for DCE && AIX that can be used to make AIX -use DCE for getting group/passwd entries. This is needed if one is running -with a bare bones passwd/group file and AUTHSTATE set to DCE (This will be -more or less clear to people doing this...) I have forced this on for now. - -k5dfspag.c is in lib/krb5 -k5dfspag.c is dependent on DCE only. -It is also POSIX systems only. There are defines for the location of -k5dcecon and dpagaix that needs a correct configure setting. - -k5dcecon needs no special things for the compile except whatever is needed -on the target system to compile dce programs. -(On aix the dce compile flags are: -D_THREAD_SAFE -D_AIX32_THREADS=1 -D_AIX41 -D_AES_SOURCE or one can use xlc_r4 if it is version 3.6.4 or later) - -k5dcecon wants the following libs (on aix 4.3): --ldce (and setenv from somewhere) - -dpagaix is only needed on AIX (see k5dfspag.c). -dpagaix needs dfspag.exp and is linked with -ld -edpagaix -o dpagaix dpagaix.o dfspag.exp - - -Hope to get this into heimdal soon :-) although I know that you will have to -change some things to get it cleanly into configure. Since I don't know the -structure of the code (heimdal), nor enough of configure, good enough I -just won't try it myself. - -One more thing, to get this to work one has to put fcache_version = x in -krb5.conf where x = whatever the DCE implementation understands, (usually -1 or 2). -Thanks for adding that... - - -Åke Sandgren (ake@hpc2n.umu.se) -HPC2N -Umeå University -Sweden - -PS -I have now added patches for configure.in and some Makefile.am's to get this -all cleanly (I hope) into heimdal. diff --git a/crypto/heimdal/appl/dceutils/README.original b/crypto/heimdal/appl/dceutils/README.original deleted file mode 100644 index 0887023..0000000 --- a/crypto/heimdal/appl/dceutils/README.original +++ /dev/null @@ -1,335 +0,0 @@ -KERBEROS and DCE INTEROPERABILITY ROUTINES - -WHAT'S NEW - -When k5dcecon was examining the ticket caches looking to -update one with a newer TGT, it might update the wrong -one for the correct user. This problem was reported by PNNL, -and is now fixed. - -Any Kerberized application can now use a forwarded TGT to establish a -DCE context, or can use a previously established DCE context. This is -both a functional improvement and a performance improvement. - -BACKGROUND - -The MIT Kerberos 5 Release 1.x and DCE 1.1 can interoperate in a -number of ways. This is possible because: - - o DCE used Kerberos 5 internally. Based on the MIT code as of beta 4 - or so, with additional changes. - - o The DCE security server can act as a K5 KDC, as defined in RFC 1510 - and responds on port 88. - - o On the clients, DCE and Kerberos use the same format for the ticket - cache, and then can share it. The KRB5CCNAME environment variable points - at the cache. - - o On the clients, DCE and Kerberos use the same format for the srvtab - file. DCE refers to is a /krb5/v5srvtab and Kerberos as - /etc/krb5.keytab. They can be symlinked. - - o MIT has added many options to the krb5.conf configuration file - which allows newer features of Release 1.0 to be turned off to match - the earlier version of Kerberos upon which DCE is based. - - o DCE will accept a externally obtained Kerberos TGT in place of a - password when establishing a DCE context. - -There are some areas where they differ, including the following: - - o Administration of the database and the keytab files is done by the - DCE routines, rather the the Kerberos kadmin. - - o User password changes must be done using the DCE commands. Kpasswd - does not work. (But there are mods to Kerberos to use the v5passwd - with DCE. - - o DCE goes beyond authentication only, and provides authorization via - the PAC, and the dce-ptgt tickets stored in the cache. Thus a - Kerberos KDC can not act as a DCE security server. - - o A DCE cell and Kerberos realm can cross-realm authenticate, but - there can be no intermediate realms. (There are other problems - in this area as well. But directly connected realms/cells do work.) - - o You can't link a module with the DCE library and the Kerberos - library. They have conflicting routines, static data and structures. - -One of the main features of DCE is the Distributed File System -DFS. Access to DFS requires authentication and authorization, and when -one uses a Kerberized network utility such as telnet, a forwarded -Kerberos ticket can be used to establish the DCE context to allow -access to DFS. - - -NEW TO THIS RELEASE - -This release introduces sharing of a DCE context, and PAG, and allows -any Kerberized application to establish or share the context. This is -made possible by using an undocumented feature of DCE which is on at -least the Transarc and IBM releases of DCE 1.1. - -I am in the process of trying to get this contributed to the general -DCE 1.2.2 release as a patch, so it could be included in other vendors -products. HP has expressed interest in doing this, as well as the -OpenGroup if the modification is contributed. You can help by -requesting Transarc and/or IBM to submit this modification to the -OpenGroup and ask your vendor to adopt this modification. - -The feature is a modification to the setpag() system call which will -allow an authorized process to set the PAG to a specific value, and -thus allow unrelated processes to share the same PAG. - -This then allows the Kerberized daemons such as kshd, to exec a DCE -module which established the DCE context. Kshd then sets the -KRB5CCNAME environment variable and then issues the setpag() to use -this context. This solves the linking problem. This is done via the -k5dfspag.c routine. - -The k5dfspag.c code is compiled with the lib/krb5/os routines and -included in the libkrb5. A daemon calls krb5_dfs_pag after the -krb5_kuserok has determined that the Kerberos principal and local -userid pair are acceptable. This should be done early so as to give -the daemon access to the home directory which may be located on DFS. -If the .k5login file is used by krb5_kuserok it will need to be -accessed by the daemon and will need special ACL handling. - -The krb5_dfs_pag routine will exec the k5dcecon module to do all the -real work. Upon return, if a PAG is obtained, krb5_dfs_pag with set -the PAG for the current process to the returned PAG value. It will -also set the KRB5CCNAME environment as well. Under DCE the PAG value -is the nnnnnnn part of the name of the cache: -FILE:/opt/dcelocal/var/security/creds/dcecred_nnnnnnnn. - -The k5dcecon routine will attempt to use TGT which may have been -forwarded, to convert it to a DCE context. If there is no TGT, an -attempt will be made to join an existing PAG for the local userid, and -Kerberos principal. If there are existing PAGs, and a forwarded TGT, -k5dcecon will check the lifetime of the forwarded TGT, and if it is -less than the lifetime of the PAG, it will just join the PAG. If it -is greater, it will refresh the PAG using the forwarded TGT. -This approach has the advantage of not requiring many new tickets from -having to be obtained, and allows one to refresh a DCE context, or use -an already established context. - -If the system also has AFS, the AFS krb5_afs_pag should be called -after the krb5_dfs_pag, since cache pointed at via the KRB5CCNAME may -have changed, such as if a DFS PAG has been joined. The AFS code does -not have the capability to join an existing AFS PAG, but can use the -same cache which might already had a -afsx/@ service ticket. - - -WHAT'S IN THIS RELEASE - -The k5prelogin, k5dcelogin, k5afslogin (with ak5log) were designed to -be slipped in between telnetd or klogind and login.krb5. They would -use a forwarded Kerberos ticket to establish a DCE context. They are -the older programs which are included here. They work on all DCE -platforms, and don't take advantage of the undocumented setpag -feature. (A version of k5dcelogin is being included with DCE 1.2.2) - -K5dcecon is the new program which can be used to create, update or -join a DCE context. k5dcecon returns KRB5CCNAME string which contains -the PAG. - -k5dfspag.c is to be built in the MIT Kerberos 5 release 1.0 patchlevel -1 and added to the libkrb5. It will exec k5dcecon and upon return set -the KRB5CCNAME and PAG. Mods to Kerberized klogind, rshd, telnetd, -ftpd are available to use the k5dfspag. - -Testpag.c is a test programs to see if the PAG can be set. - -The cpwkey.c routine can be used to change a key in the DCE registry, -by adding the key directly, or by setting the salt/pepper and password -or by providing the key and the pepper. This could be useful when -coping keys from a K4 or AFS database to DCE. It can also be used when -setting a DCE to K5 cross-cell key. This program is a test program -For mass inserts, it should be rewritten to read from stdin. - -K5dcelogin can also be called directly, much like dce_login. -I use the following commands in effect do the same thing as dce_login -and get a forwardable ticket, DCE context and an AFS token: - - #!/bin/csh - # simulate a dce_login using krb5 kinit and k5dcelogin - # - setenv KRB5CCNAME FILE:/tmp/krb5cc_p$$ - /krb5/bin/kinit -f - exec /krb5/sbin/k5dcelogin /krb5/sbin/k5afslogin /bin/csh - #exec /krb5/sbin/k5dcelogin /bin/csh - -This could be useful in a mixed cell where "AS_REQ" messages are -handled by a K5 KDC, but DCE RPCs are handled by the DCE security -server. - -TESTING THE SETPAG - -The krb5_dfs_pag routine relies on an undocumented feature which is -in the AIX and Transarc Solaris ports of DCE and has been recently -added to the SGI version. To test if this feature is present -on some other DFS implementation use the testpag routine. - -The testpag routine attempts to set a PAG value to one you supply. It -uses the afs_syscall with the afs_setpag, and passes the supplied -PAG value as the next parameter. On an unmodifed system, this -will be ignored, and a new will be set. You should also check that -if run as a user, you cannot join a PAG owned by another user. -When run as root, any PAG should be usable. - -On a machine with DFS running, do a dce_login to get a DCE context and -PAG. ECHO the KRB5CCNAME and look at the nnnnnnnn at the end. It -should look like an 8 char hex value, which may be 41ffxxxx on some -systems. - -Su to root and unsetenv KRB5CCNAME. Do a testpag -n nnnnnnnn where -nnnnnnnn is the PAG obtained for the above name. - -It should look like this example on an AIX 4.1.4 system: - - pembroke# ./testpag -n 63dc9997 - calling k5dcepag newpag=63dc9997 - PAG returned = 63dc9997 - -You will be running under a new shell with the PAG and KRB5CCNAME set. -If the PAG returned is the same as the newpag, then it worked. You can -further verify this by doing a DCE klist, cd to DFS and a DCE klist -again. The klist should show some tickets for DFS servers. - -If the PAG returned is not the same, and repeated attempts show a -returned PAG decremented by 1 from the previous returned PAG, then -this system does not have the modification For example: - - # ./testpag -n 41fffff9 - calling k5dcepag newpag=41fffff9 - PAG returned = 41fffff8 - # ./testpag -n 41fffff9 - calling k5dcepag newpag=41fffff9 - PAG returned = 41fffff7 - -In this case the syscall is ignoring the newpag parameter. - -Running it with -n 0 should get the next PAG value with or without -this modification. - -If the DFS kernel extensions are not installed, you would get -something like this: - - caliban.ctd.anl.gov% ./testpag -n 012345678 - calling k5dcepag newpag=012345678 - Setpag failed with a system error - PAG returned = ffffffff - Not a good pag value - -If you DFS implementation does not have this modification, you could -attempt to install it yourself. But this requires source and requires -modifications to the kernel extensions. At the end of this note is an -untested sample using the DCE 1.2.2 source code. You can also contact -your system vendor and ask for this modification. - -UNICOS has a similar function setppag(newpag) which can be used to set -the PAG of the parent. Contact me if you are interested. - -HOW TO INSTALL - -Examine the k5dfspag.c file to make sure the DFS syscalls are correct -for your platform. See the /opt/dcelocal/share/include/dcedfs/syscall.h -on Solaris for example. - -You should build the testpag routine and make sure it works before -adding all the other mods. If it fails you can still use the klogind -and telnetd with the k5prelogin and k5dcelogin code. - -If you intend to install with a prefix other than /krb5, change: -DPAGAIX and K5DCECON in k5dfspag.c; the three references in -k5prelogin.c; and the DESTDIR in the Makefile. - -Get k5101.cdiff.xxxxxx.tar file and install the mods for ANL_DFS_PAG -and ANL_DCE to the MIT Kerberos 5 source. These mods turn on some DCE -related changes and the calls to krb5_dfs_pag. - -Symlink or copy the k5dfspag.c to the src/lib/krb5/os directory. - -Add the -DANL_DFS_PAG and -DANL_DCE flags to the configuration. - -Configure and Build the Kerberos v5. - -Modify the k5dce Makefile for your system. - -Build the k5dcecon and related programs. - -Install both the MIT Kerberos v5 and the k5dcecon and dpagaix if AIX. - -The makefile can also build k5dcelogin and k5prelogin. The install -can install k5dcelogin, k5prelogin and update the links for login.krb5 --> k5prelogin and moving login.krb5 to login.k5. If you will be using -the k5dcecon/k5dfspag with the Kerberos mods, you don't need -k5prelogin, or the links changed, and may not need k5dcelogin. - -Note that Transarc has obfuscated the entries to the lib, and -the 1.0.3a is different from the 1.1. You may need to build two -versions of the k5dcelogin and/or k5dcecon one for each. - -AIX ONLY - -The dpagaix routine is needed for AIX because of the way they do the -syscalls. - -The following fix.aix.libdce.mk is not needed if dce 2.1.0.21 -has been installed. This PTF exposed the needed entrypoints. - -The fix.aix.libdce.mk is a Makefile for AIX 4.x to add the required -external entry points to the libdce.a. These are needed by k5dcecon -and k5dcelogin. A bug report was submitted to IBM on this, and it was -rejected. But since DCE 1.2.2 will have a k5dcelogin, this should not -be needed with 1.2.2 - -Copy /usr/lib/libdce.a to /usr/libdce.a.orig before starting. Copy the -makefile to its own directory. It will create a new libdce.a which you -need to copy back to /usr/lib/libdce.a You will need to reboot the -machine. See the /usr/lpp/dce/examples/inst/README.AIX for a similar -procedure. IBM was not responsive in a request to have these added. - -UNTESTED KERNEL EXTENSION FOR SETPAG - -*** src/file/osi/,osi_pag.c Wed Oct 2 13:03:05 1996 ---- src/file/osi/osi_pag.c Mon Jul 28 13:53:13 1997 -*************** -*** 293,298 **** ---- 293,302 ---- - int code; - - osi_MakePreemptionRight(); -+ /* allow sharing of a PAG by non child processes DEE- 6/6/97 */ -+ if (unused && osi_GetUID(osi_getucred()) == 0) { -+ newpag = unused; -+ } else { - osi_mutex_enter(&osi_pagLock); - now = osi_Time(); - soonest = osi_firstPagTime + -*************** -*** 309,314 **** ---- 313,319 ---- - } - osi_mutex_exit(&osi_pagLock); - newpag = osi_genpag(); -+ } - osi_pcred_lock(p); - credp = crcopy(osi_getucred()); - code = osi_SetPagInCred(credp, newpag); - -Created 07/08/96 -Modified 09/30/96 -Modified 11/19/96 -Modified 12/19/96 -Modified 06/20/97 -Modified 07/28/97 -Modified 02/18/98 - - Douglas E. Engert - Argonne National Laboratory - 9700 South Cass Avenue - Argonne, Illinois 60439 - (630) 252-5444 diff --git a/crypto/heimdal/appl/dceutils/dfspag.exp b/crypto/heimdal/appl/dceutils/dfspag.exp deleted file mode 100644 index ed39788..0000000 --- a/crypto/heimdal/appl/dceutils/dfspag.exp +++ /dev/null @@ -1,3 +0,0 @@ -#!/unix -* kernel extentions used to get the pag -kafs_syscall syscall diff --git a/crypto/heimdal/appl/dceutils/dpagaix.c b/crypto/heimdal/appl/dceutils/dpagaix.c deleted file mode 100644 index cbc23cb..0000000 --- a/crypto/heimdal/appl/dceutils/dpagaix.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * dpagaix.c - * On AIX we need to get the kernel extentions - * with the DFS kafs_syscall in it. - * We might be running on a system - * where DFS is not active. - * So we use this dummy routine which - * might not load to do the dirty work - * - * DCE does this with the /usr/lib/drivers/dfsloadobj - * - */ - - int dpagaix(parm1, parm2, parm3, parm4, parm5, parm6) - int parm1; - int parm2; - int parm3; - int parm4; - int parm5; - int parm6; - { - return(kafs_syscall(parm1, parm2, parm3, parm4, parm5, parm6)); - } diff --git a/crypto/heimdal/appl/dceutils/k5dce.h b/crypto/heimdal/appl/dceutils/k5dce.h deleted file mode 100644 index 424ebdc..0000000 --- a/crypto/heimdal/appl/dceutils/k5dce.h +++ /dev/null @@ -1,165 +0,0 @@ -/* dummy K5 routines which are needed to get this to - * compile without having access ti the DCE versions - * of the header files. - * Thiis is very crude, and OSF needs to expose the K5 - * API. - */ - -#ifdef sun -/* Transarc obfascates these routines */ -#ifdef DCE_1_1 - -#define krb5_init_ets _dce_PkjKqOaklP -#define krb5_copy_creds _dce_LuFxPiITzD -#define krb5_unparse_name _dce_LWHtAuNgRV -#define krb5_get_default_realm _dce_vDruhprWGh -#define krb5_build_principal _dce_qwAalSzTtF -#define krb5_build_principal_ext _dce_vhafIQlejW -#define krb5_build_principal_va _dce_alsqToMmuJ -#define krb5_cc_default _dce_KZRshhTXhE -#define krb5_cc_default_name _dce_bzJVAjHXVQ -#define sec_login_krb5_add_cred _dce_ePDtOJTZvU - -#else /* DCE 1.0.3a */ - -#define krb5_init_ets _dce_BmLRpOVsBo -#define krb5_copy_creds _dce_VGwSEBNwaf -#define krb5_unparse_name _dce_PgAOkJoMXA -#define krb5_get_default_realm _dce_plVOzStKyK -#define krb5_build_principal _dce_uAKSsluIFy -#define krb5_build_principal_ext _dce_tRMpPiRada -#define krb5_build_principal_va _dce_SxnLejZemH -#define krb5_cc_default _dce_SeKosWFnsv -#define krb5_cc_default_name _dce_qJeaphJWVc -#define sec_login_krb5_add_cred _dce_uHwRasumsN - -#endif -#endif - -/* Define the bare minimum k5 structures which are needed - * by this program. Since the krb5 includes are not supplied - * with DCE, these were based on the MIT Kerberos 5 beta 3 - * which should match the DCE as of 1.0.3 at least. - * The tricky one is the krb5_creds, since one is allocated - * by this program, and it needs access to the client principal - * in it. - * Note that there are no function prototypes, so there is no - * compile time checking. - * DEE 07/11/95 - */ -#define NPROTOTYPE(x) () -typedef int krb5_int32; /* assuming all DCE systems are 32 bit */ -typedef short krb5short; /* assuming short is 16 bit */ -typedef krb5_int32 krb5_error_code; -typedef unsigned char krb5_octet; -typedef krb5_octet krb5_boolean; -typedef krb5short krb5_keytype; /* in k5.2 it's a short */ -typedef krb5_int32 krb5_flags; -typedef krb5_int32 krb5_timestamp; - -typedef char * krb5_pointer; /* pointer to unexposed data */ - -typedef struct _krb5_ccache { - struct _krb5_cc_ops *ops; - krb5_pointer data; -} *krb5_ccache; - -typedef struct _krb5_cc_ops { - char *prefix; - char *(*get_name) NPROTOTYPE((krb5_ccache)); - krb5_error_code (*resolve) NPROTOTYPE((krb5_ccache *, char *)); - krb5_error_code (*gen_new) NPROTOTYPE((krb5_ccache *)); - krb5_error_code (*init) NPROTOTYPE((krb5_ccache, krb5_principal)); - krb5_error_code (*destroy) NPROTOTYPE((krb5_ccache)); - krb5_error_code (*close) NPROTOTYPE((krb5_ccache)); - krb5_error_code (*store) NPROTOTYPE((krb5_ccache, krb5_creds *)); - krb5_error_code (*retrieve) NPROTOTYPE((krb5_ccache, krb5_flags, - krb5_creds *, krb5_creds *)); - krb5_error_code (*get_princ) NPROTOTYPE((krb5_ccache, - krb5_principal *)); - krb5_error_code (*get_first) NPROTOTYPE((krb5_ccache, - krb5_cc_cursor *)); - krb5_error_code (*get_next) NPROTOTYPE((krb5_ccache, krb5_cc_cursor *, - krb5_creds *)); - krb5_error_code (*end_get) NPROTOTYPE((krb5_ccache, krb5_cc_cursor *)); - krb5_error_code (*remove_cred) NPROTOTYPE((krb5_ccache, krb5_flags, - krb5_creds *)); - krb5_error_code (*set_flags) NPROTOTYPE((krb5_ccache, krb5_flags)); -} krb5_cc_ops; - -typedef struct _krb5_keyblock { - krb5_keytype keytype; - int length; - krb5_octet *contents; -} krb5_keyblock; - -typedef struct _krb5_ticket_times { - krb5_timestamp authtime; - krb5_timestamp starttime; - krb5_timestamp endtime; - krb5_timestamp renew_till; -} krb5_ticket_times; - -typedef krb5_pointer krb5_cc_cursor; - -typedef struct _krb5_data { - int length; - char *data; -} krb5_data; - -typedef struct _krb5_authdata { - int ad_type; - int length; - krb5_octet *contents; -} krb5_authdata; - -typedef struct _krb5_creds { - krb5_pointer client; - krb5_pointer server; - krb5_keyblock keyblock; - krb5_ticket_times times; - krb5_boolean is_skey; - krb5_flags ticket_flags; - krb5_pointer **addresses; - krb5_data ticket; - krb5_data second_ticket; - krb5_pointer **authdata; -} krb5_creds; - -typedef krb5_pointer krb5_principal; - -#define KRB5_CC_END 336760974 -#define KRB5_TC_OPENCLOSE 0x00000001 - -/* Ticket flags */ -/* flags are 32 bits; each host is responsible to put the 4 bytes - representing these bits into net order before transmission */ -/* #define TKT_FLG_RESERVED 0x80000000 */ -#define TKT_FLG_FORWARDABLE 0x40000000 -#define TKT_FLG_FORWARDED 0x20000000 -#define TKT_FLG_PROXIABLE 0x10000000 -#define TKT_FLG_PROXY 0x08000000 -#define TKT_FLG_MAY_POSTDATE 0x04000000 -#define TKT_FLG_POSTDATED 0x02000000 -#define TKT_FLG_INVALID 0x01000000 -#define TKT_FLG_RENEWABLE 0x00800000 -#define TKT_FLG_INITIAL 0x00400000 -#define TKT_FLG_PRE_AUTH 0x00200000 -#define TKT_FLG_HW_AUTH 0x00100000 -#ifdef PK_INIT -#define TKT_FLG_PUBKEY_PREAUTH 0x00080000 -#define TKT_FLG_DIGSIGN_PREAUTH 0x00040000 -#define TKT_FLG_PRIVKEY_PREAUTH 0x00020000 -#endif - - -#define krb5_cc_get_principal(cache, principal) (*(cache)->ops->get_princ)(cache, principal) -#define krb5_cc_set_flags(cache, flags) (*(cache)->ops->set_flags)(cache, flags) -#define krb5_cc_get_name(cache) (*(cache)->ops->get_name)(cache) -#define krb5_cc_start_seq_get(cache, cursor) (*(cache)->ops->get_first)(cache, cursor) -#define krb5_cc_next_cred(cache, cursor, creds) (*(cache)->ops->get_next)(cache, cursor, creds) -#define krb5_cc_destroy(cache) (*(cache)->ops->destroy)(cache) -#define krb5_cc_end_seq_get(cache, cursor) (*(cache)->ops->end_get)(cache, cursor) - -/* end of k5 dummy typedefs */ - diff --git a/crypto/heimdal/appl/dceutils/k5dcecon.c b/crypto/heimdal/appl/dceutils/k5dcecon.c deleted file mode 100644 index 99310bb..0000000 --- a/crypto/heimdal/appl/dceutils/k5dcecon.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * (c) Copyright 1995 HEWLETT-PACKARD COMPANY - * - * To anyone who acknowledges that this file is provided - * "AS IS" without any express or implied warranty: - * permission to use, copy, modify, and distribute this - * file for any purpose is hereby granted without fee, - * provided that the above copyright notice and this - * notice appears in all copies, and that the name of - * Hewlett-Packard Company not be used in advertising or - * publicity pertaining to distribution of the software - * without specific, written prior permission. Hewlett- - * Packard Company makes no representations about the - * suitability of this software for any purpose. - * - */ -/* - * k5dcecon - Program to convert a K5 TGT to a DCE context, - * for use with DFS and its PAG. - * - * The program is designed to be called as a sub process, - * and return via stdout the name of the cache which implies - * the PAG which should be used. This program itself does not - * use the cache or PAG itself, so the PAG in the kernel for - * this program may not be set. - * - * The calling program can then use the name of the cache - * to set the KRB5CCNAME and PAG for its self and its children. - * - * If no ticket was passed, an attemplt to join an existing - * PAG will be made. - * - * If a forwarded K5 TGT is passed in, either a new DCE - * context will be created, or an existing one will be updated. - * If the same ticket was already used to create an existing - * context, it will be joined instead. - * - * Parts of this program are based on k5dceauth,c which was - * given to me by HP and by the k5dcelogin.c which I developed. - * A slightly different version of k5dcelogin.c, was added to - * DCE 1.2.2 - * - * D. E. Engert 6/17/97 ANL - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "k5dce.h" - -#include -#include -#include - -/* #define DEBUG */ -#if defined(DEBUG) -#define DEEDEBUG(A) fprintf(stderr,A); fflush(stderr) -#define DEEDEBUG2(A,B) fprintf(stderr,A,B); fflush(stderr) -#else -#define DEEDEBUG(A) -#define DEEDEBUG2(A,B) -#endif - -#ifdef __hpux -#define seteuid(A) setresuid(-1,A,-1); -#endif - - -int k5dcecreate (uid_t, char *, char*, krb5_creds **); -int k5dcecon (uid_t, char *, char *); -int k5dcegettgt (krb5_ccache *, char *, char *, krb5_creds **); -int k5dcematch (uid_t, char *, char *, off_t *, krb5_creds **); -int k5dcesession (uid_t, char *, krb5_creds **, int *,krb5_flags); - - -char *progname = "k5dcecon"; -static time_t now; - -#ifdef notdef -#ifdef _AIX -/*---------------------------------------------*/ - /* AIX with DCE 1.1 does not have the com_err in the libdce.a - * do a half hearted job of substituting for it. - */ -void com_err(char *p1, int code, ...) -{ - int lst; - dce_error_string_t err_string; - dce_error_inq_text(code, err_string, &lst); - fprintf(stderr,"Error %d in %s: %s\n", code, p1, err_string ); -} - -/*---------------------------------------------*/ -void krb5_init_ets() -{ - -} -#endif -#endif - - -/*------------------------------------------------*/ -/* find a cache to use for our new pag */ -/* Since there is no simple way to determine which - * caches are associated with a pag, we will have - * do look around and see what makes most sense on - * different systems. - * on a Solaris system, and in the DCE source, - * the pags always start with a 41. - * this is not true on the IBM, where there does not - * appear to be any pattern. - * - * But since we are always certifing our creds when - * they are received, we can us that fact, and look - * at the first word of the associated data file - * to see that it has a "5". If not don't use. - */ - -int k5dcesession(luid, pname, tgt, ppag, tflags) - uid_t luid; - char *pname; - krb5_creds **tgt; - int *ppag; - krb5_flags tflags; -{ - DIR *dirp; - struct dirent *direntp; - off_t size; - krb5_timestamp endtime; - int better = 0; - krb5_creds *xtgt; - - char prev_name[17] = ""; - krb5_timestamp prev_endtime; - off_t prev_size; - u_long prev_pag = 0; - - char ccname[64] = "FILE:/opt/dcelocal/var/security/creds/"; - - error_status_t st; - sec_login_handle_t lcontext = 0; - dce_error_string_t err_string; - int lst; - - DEEDEBUG2("k5dcesession looking for flags %8.8x\n",tflags); - - dirp = opendir("/opt/dcelocal/var/security/creds/"); - if (dirp == NULL) { - return 1; - } - - while ( (direntp = readdir( dirp )) != NULL ) { - -/* - * (but root has the ffffffff which we are not interested in) - */ - if (!strncmp(direntp->d_name,"dcecred_",8) - && (strlen(direntp->d_name) == 16)) { - - /* looks like a cache name, lets do the stat, etc */ - - strcpy(ccname+38,direntp->d_name); - if (!k5dcematch(luid, pname, ccname, &size, &xtgt)) { - - /* its one of our caches, see if it is better - * i.e. the endtime is farther, and if the endtimes - * are the same, take the larger, as he who has the - * most tickets wins. - * it must also had the same set of flags at least - * i.e. if the forwarded TGT is forwardable, this one must - * be as well. - */ - - DEEDEBUG2("Cache:%s",direntp->d_name); - DEEDEBUG2(" size:%d",size); - DEEDEBUG2(" flags:%8.8x",xtgt->ticket_flags); - DEEDEBUG2(" %s",ctime((time_t *)&xtgt->times.endtime)); - - if ((xtgt->ticket_flags & tflags) == tflags ) { - if (prev_name[0]) { - if (xtgt->times.endtime > prev_endtime) { - better = 1; - } else if ((xtgt->times.endtime = prev_endtime) - && (size > prev_size)){ - better = 1; - } - } else { /* the first */ - if (xtgt->times.endtime >= now) { - better = 1; - } - } - if (better) { - strcpy(prev_name, direntp->d_name); - prev_endtime = xtgt->times.endtime; - prev_size = size; - sscanf(prev_name+8,"%8X",&prev_pag); - *tgt = xtgt; - better = 0; - } - } - } - } - } - (void)closedir( dirp ); - - if (!prev_name[0]) - return 1; /* failed to find one */ - - DEEDEBUG2("Best: %s\n",prev_name); - - if (ppag) - *ppag = prev_pag; - - strcpy(ccname+38,prev_name); - setenv("KRB5CCNAME",ccname,1); - - return(0); -} - - -/*----------------------------------------------*/ -/* see if this cache is for this this principal */ - -int k5dcematch(luid, pname, ccname, sizep, tgt) - uid_t luid; - char *pname; - char *ccname; - off_t *sizep; /* size of the file */ - krb5_creds **tgt; -{ - - krb5_ccache cache; - struct stat stbuf; - char ccdata[256]; - int fd; - int status; - - /* DEEDEBUG2("k5dcematch called: cache=%s\n",ccname+38); */ - - if (!strncmp(ccname,"FILE:",5)) { - - strcpy(ccdata,ccname+5); - strcat(ccdata,".data"); - - /* DEEDEBUG2("Checking the .data file for %s\n",ccdata); */ - - if (stat(ccdata, &stbuf)) - return(1); - - if (stbuf.st_uid != luid) - return(1); - - if ((fd = open(ccdata,O_RDONLY)) == -1) - return(1); - - if ((read(fd,&status,4)) != 4) { - close(fd); - return(1); - } - - /* DEEDEBUG2(".data file status = %d\n", status); */ - - if (status != 5) - return(1); - - if (stat(ccname+5, &stbuf)) - return(1); - - if (stbuf.st_uid != luid) - return(1); - - *sizep = stbuf.st_size; - } - - return(k5dcegettgt(&cache, ccname, pname, tgt)); -} - - -/*----------------------------------------*/ -/* k5dcegettgt - get the tgt from a cache */ - -int k5dcegettgt(pcache, ccname, pname, tgt) - krb5_ccache *pcache; - char *ccname; - char *pname; - krb5_creds **tgt; - -{ - krb5_ccache cache; - krb5_cc_cursor cur; - krb5_creds creds; - int code; - int found = 1; - krb5_principal princ; - char *kusername; - krb5_flags flags; - char *sname, *realm, *tgtname = NULL; - - /* Since DCE does not expose much of the Kerberos interface, - * we will have to use what we can. This means setting the - * KRB5CCNAME for each file we want to test - * We will also not worry about freeing extra cache structures - * as this this routine is also not exposed, and this should not - * effect this module. - * We should also free the creds contents, but that is not exposed - * either. - */ - - setenv("KRB5CCNAME",ccname,1); - cache = NULL; - *tgt = NULL; - - if (code = krb5_cc_default(pcache)) { - com_err(progname, code, "while getting ccache"); - goto return2; - } - - DEEDEBUG("Got cache\n"); - flags = 0; - if (code = krb5_cc_set_flags(*pcache, flags)) { - com_err(progname, code,"While setting flags"); - goto return2; - } - DEEDEBUG("Set flags\n"); - if (code = krb5_cc_get_principal(*pcache, &princ)) { - com_err(progname, code, "While getting princ"); - goto return1; - } - DEEDEBUG("Got principal\n"); - if (code = krb5_unparse_name(princ, &kusername)) { - com_err(progname, code, "While unparsing principal"); - goto return1; - } - - DEEDEBUG2("Unparsed to \"%s\"\n", kusername); - DEEDEBUG2("pname is \"%s\"\n", pname); - if (strcmp(kusername, pname)) { - DEEDEBUG("Principals not equal\n"); - goto return1; - } - DEEDEBUG("Principals equal\n"); - - realm = strchr(pname,'@'); - realm++; - - if ((tgtname = malloc(9 + 2 * strlen(realm))) == 0) { - fprintf(stderr,"Malloc failed for tgtname\n"); - goto return1; - } - - strcpy(tgtname,"krbtgt/"); - strcat(tgtname,realm); - strcat(tgtname,"@"); - strcat(tgtname,realm); - - DEEDEBUG2("Getting tgt %s\n", tgtname); - if (code = krb5_cc_start_seq_get(*pcache, &cur)) { - com_err(progname, code, "while starting to retrieve tickets"); - goto return1; - } - - while (!(code = krb5_cc_next_cred(*pcache, &cur, &creds))) { - krb5_creds *cred = &creds; - - if (code = krb5_unparse_name(cred->server, &sname)) { - com_err(progname, code, "while unparsing server name"); - continue; - } - - if (strncmp(sname, tgtname, strlen(tgtname)) == 0) { - DEEDEBUG("FOUND\n"); - if (code = krb5_copy_creds(&creds, tgt)) { - com_err(progname, code, "while copying TGT"); - goto return1; - } - found = 0; - break; - } - /* we should do a krb5_free_cred_contents(creds); */ - } - - if (code = krb5_cc_end_seq_get(*pcache, &cur)) { - com_err(progname, code, "while finishing retrieval"); - goto return2; - } - -return1: - flags = KRB5_TC_OPENCLOSE; - krb5_cc_set_flags(*pcache, flags); /* force a close */ - -return2: - if (tgtname) - free(tgtname); - - return(found); -} - - -/*------------------------------------------*/ -/* Convert a forwarded TGT to a DCE context */ -int k5dcecon(luid, luser, pname) - uid_t luid; - char *luser; - char *pname; -{ - - krb5_creds *ftgt = NULL; - krb5_creds *tgt = NULL; - unsigned32 dfspag; - boolean32 reset_passwd = 0; - int lst; - dce_error_string_t err_string; - char *shell_prog; - krb5_ccache fcache; - char *ccname; - char *kusername; - char *urealm; - char *cp; - int pag; - int code; - krb5_timestamp endtime; - - - /* If there is no cache to be converted, we should not be here */ - - if ((ccname = getenv("KRB5CCNAME")) == NULL) { - DEEDEBUG("No KRB5CCNAME\n"); - return(1); - } - - if (k5dcegettgt(&fcache, ccname, pname, &ftgt)) { - fprintf(stderr, "%s: Did not find TGT\n", progname); - return(1); - } - - - DEEDEBUG2("flags=%x\n",ftgt->ticket_flags); - if (!(ftgt->ticket_flags & TKT_FLG_FORWARDABLE)){ - fprintf(stderr,"Ticket not forwardable\n"); - return(0); /* but OK to continue */ - } - - setenv("KRB5CCNAME","",1); - -#define TKT_ACCEPTABLE (TKT_FLG_FORWARDABLE | TKT_FLG_PROXIABLE \ - | TKT_FLG_MAY_POSTDATE | TKT_FLG_RENEWABLE | TKT_FLG_HW_AUTH \ - | TKT_FLG_PRE_AUTH) - - if (!k5dcesession(luid, pname, &tgt, &pag, - (ftgt->ticket_flags & TKT_ACCEPTABLE))) { - if (ftgt->times.endtime > tgt->times.endtime) { - DEEDEBUG("Updating existing cache\n"); - return(k5dceupdate(&ftgt, pag)); - } else { - DEEDEBUG("Using existing cache\n"); - return(0); /* use the original one */ - } - } - /* see if the tgts match up */ - - if ((code = k5dcecreate(luid, luser, pname, &ftgt))) { - return (code); - } - - /* - * Destroy the Kerberos5 cred cache file. - * but dont care aout the return code. - */ - - DEEDEBUG("Destroying the old cache\n"); - if ((code = krb5_cc_destroy(fcache))) { - com_err(progname, code, "while destroying Kerberos5 ccache"); - } - return (0); -} - - -/*--------------------------------------------------*/ -/* k5dceupdate - update the cache with a new TGT */ -/* Assumed that the KRB5CCNAME has been set */ - -int k5dceupdate(krbtgt, pag) - krb5_creds **krbtgt; - int pag; -{ - - krb5_ccache ccache; - int code; - - if (code = krb5_cc_default(&ccache)) { - com_err(progname, code, "while opening cache for update"); - return(2); - } - - if (code = ccache->ops->init(ccache,(*krbtgt)->client)) { - com_err(progname, code, "while reinitilizing cache"); - return(3); - } - - /* krb5_cc_store_cred */ - if (code = ccache->ops->store(ccache, *krbtgt)) { - com_err(progname, code, "while updating cache"); - return(2); - } - - sec_login_pag_new_tgt(pag, (*krbtgt)->times.endtime); - return(0); -} -/*--------------------------------------------------*/ -/* k5dcecreate - create a new DCE context */ - -int k5dcecreate(luid, luser, pname, krbtgt) - uid_t luid; - char *luser; - char *pname; - krb5_creds **krbtgt; -{ - - char *cp; - char *urealm; - char *username; - char *defrealm; - uid_t uid; - - error_status_t st; - sec_login_handle_t lcontext = 0; - sec_login_auth_src_t auth_src = 0; - boolean32 reset_passwd = 0; - int lst; - dce_error_string_t err_string; - - setenv("KRB5CCNAME","",1); /* make sure it not misused */ - - uid = getuid(); - DEEDEBUG2("uid=%d\n",uid); - - /* if run as root, change to user, so as to have the - * cache created for the local user even if cross-cell - * If run as a user, let standard file protection work. - */ - - if (uid == 0) { - seteuid(luid); - } - - cp = strchr(pname,'@'); - *cp = '\0'; - urealm = ++cp; - - DEEDEBUG2("basename=%s\n",cp); - DEEDEBUG2("realm=%s\n",urealm); - - /* now build the username as a single string or a /.../cell/user - * if this is a cross cell - */ - - if ((username = malloc(7+strlen(pname)+strlen(urealm))) == 0) { - fprintf(stderr,"Malloc failed for username\n"); - goto abort; - } - if (krb5_get_default_realm(&defrealm)) { - DEEDEBUG("krb5_get_default_realm failed\n"); - goto abort; - } - - - if (!strcmp(urealm,defrealm)) { - strcpy(username,pname); - } else { - strcpy(username,"/.../"); - strcat(username,urealm); - strcat(username,"/"); - strcat(username,pname); - } - - /* - * Setup a DCE login context - */ - - if (sec_login_setup_identity((unsigned_char_p_t)username, - (sec_login_external_tgt|sec_login_proxy_cred), - &lcontext, &st)) { - /* - * Add our TGT. - */ - DEEDEBUG("Adding our new TGT\n"); - sec_login_krb5_add_cred(lcontext, *krbtgt, &st); - if (st) { - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, - "Error while adding credentials for %s because %s\n", - username, err_string); - goto abort; - } - DEEDEBUG("validating and certifying\n"); - /* - * Now "validate" and certify the identity, - * usually we would pass a password here, but... - * sec_login_valid_and_cert_ident - * sec_login_validate_identity - */ - - if (sec_login_validate_identity(lcontext, 0, &reset_passwd, - &auth_src, &st)) { - DEEDEBUG2("validate_identity st=%d\n",st); - if (st) { - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, "Validation error for %s because %s\n", - username, err_string); - goto abort; - } - if (!sec_login_certify_identity(lcontext,&st)) { - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, - "Credentials not certified because %s\n",err_string); - } - if (reset_passwd) { - fprintf(stderr, - "Password must be changed for %s\n", username); - } - if (auth_src == sec_login_auth_src_local) { - fprintf(stderr, - "Credentials obtained from local registry for %s\n", - username); - } - if (auth_src == sec_login_auth_src_overridden) { - fprintf(stderr, "Validated %s from local override entry, no network credentials obtained\n", username); - goto abort; - - } - /* - * Actually create the cred files. - */ - DEEDEBUG("Ceating new cred files.\n"); - sec_login_set_context(lcontext, &st); - if (st) { - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, - "Unable to set context for %s because %s\n", - username, err_string); - goto abort; - } - - /* - * Now free up the local context and leave the - * network context with its pag - */ -#if 0 - sec_login_release_context(&lcontext, &st); - if (st) { - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, - "Unable to release context for %s because %s\n", - username, err_string); - goto abort; - } -#endif - } - else { - DEEDEBUG2("validate failed %d\n",st); - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, - "Unable to validate %s because %s\n", username, - err_string); - goto abort; - } - } - else { - dce_error_inq_text(st, err_string, &lst); - fprintf(stderr, - "Unable to setup login entry for %s because %s\n", - username, err_string); - goto abort; - } - - done: - /* if we were root, get back to root */ - - DEEDEBUG2("sec_login_inq_pag %8.8x\n", - sec_login_inq_pag(lcontext, &st)); - - if (uid == 0) { - seteuid(0); - } - - DEEDEBUG("completed\n"); - return(0); - - abort: - if (uid == 0) { - seteuid(0); - } - - DEEDEBUG("Aborting\n"); - return(2); -} - - - -/*-------------------------------------------------*/ -main(argc, argv) - int argc; - char *argv[]; -{ - int status; - extern int optind; - extern char *optarg; - int rv; - - char *lusername = NULL; - char *pname = NULL; - int fflag = 0; - struct passwd *pw; - uid_t luid; - uid_t myuid; - char *ccname; - krb5_creds *tgt = NULL; - -#ifdef DEBUG - close(2); - open("/tmp/k5dce.debug",O_WRONLY|O_CREAT|O_APPEND, 0600); -#endif - - if (myuid = getuid()) { - DEEDEBUG2("UID = %d\n",myuid); - exit(33); /* must be root to run this, get out now */ - } - - while ((rv = getopt(argc,argv,"l:p:fs")) != -1) { - DEEDEBUG2("Arg = %c\n", rv); - switch(rv) { - case 'l': /* user name */ - lusername = optarg; - DEEDEBUG2("Optarg = %s\n", optarg); - break; - case 'p': /* principal name */ - pname = optarg; - DEEDEBUG2("Optarg = %s\n", optarg); - break; - case 'f': /* convert a forwarded TGT to a context */ - fflag++; - break; - case 's': /* old test parameter, ignore it */ - break; - } - } - - setlocale(LC_ALL, ""); - krb5_init_ets(); - time(&now); /* set time to check expired tickets */ - - /* if lusername == NULL, Then user is passed as the USER= variable */ - - if (!lusername) { - lusername = getenv("USER"); - if (!lusername) { - fprintf(stderr, "USER not in environment\n"); - return(3); - } - } - - if ((pw = getpwnam(lusername)) == NULL) { - fprintf(stderr, "Who are you?\n"); - return(44); - } - - luid = pw->pw_uid; - - if (fflag) { - status = k5dcecon(luid, lusername, pname); - } else { - status = k5dcesession(luid, pname, &tgt, NULL, 0); - } - - if (!status) { - printf("%s",getenv("KRB5CCNAME")); /* return via stdout to caller */ - DEEDEBUG2("KRB5CCNAME=%s\n",getenv("KRB5CCNAME")); - } - - DEEDEBUG2("Returning status %d\n",status); - return (status); -} diff --git a/crypto/heimdal/appl/dceutils/testpag.c b/crypto/heimdal/appl/dceutils/testpag.c deleted file mode 100644 index 4613fba..0000000 --- a/crypto/heimdal/appl/dceutils/testpag.c +++ /dev/null @@ -1,150 +0,0 @@ -/* Test the k5dcepag routine by setting a pag, and - * and execing a shell under this pag. - * - * This allows you to join a PAG which was created - * earlier by some other means. - * for example k5dcecon - * - * Must be run as root for testing only. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#define POSIX_SETJMP -#define POSIX_SIGNALS - -#ifdef POSIX_SIGNALS -typedef struct sigaction handler; -#define handler_init(H,F) (sigemptyset(&(H).sa_mask), \ - (H).sa_flags=0, \ - (H).sa_handler=(F)) -#define handler_swap(S,NEW,OLD) sigaction(S, &NEW, &OLD) -#define handler_set(S,OLD) sigaction(S, &OLD, NULL) -#else -typedef sigtype (*handler)(); -#define handler_init(H,F) ((H) = (F)) -#define handler_swap(S,NEW,OLD) ((OLD) = signal ((S), (NEW))) - -#define handler_set(S,OLD) (signal ((S), (OLD))) -#endif - -typedef void sigtype; - -/* - * We could include the dcedfs/syscall.h which should have these - * numbers, but it has extra baggage. So for - * simplicity sake now, we define these here. - */ - - -#define AFSCALL_SETPAG 2 -#define AFSCALL_GETPAG 11 - -#if defined(sun) -#define AFS_SYSCALL 72 - -#elif defined(hpux) -/* assume HPUX 10 + or is it 50 */ -#define AFS_SYSCALL 326 - -#elif defined(_AIX) -#define DPAGAIX "dpagaix" -/* #define DPAGAIX "/krb5/sbin/dpagaix" */ - -#elif defined(sgi) || defined(_sgi) -#define AFS_SYSCALL 206+1000 - -#else -#define AFS_SYSCALL (Unknown_DFS_AFS_SYSCALL) -#endif - -static sigjmp_buf setpag_buf; - -static sigtype mysig() -{ - siglongjmp(setpag_buf, 1); -} - - -int krb5_dfs_newpag(new_pag) - int new_pag; -{ - handler sa1, osa1; - handler sa2, osa2; - int pag = -1; - - handler_init (sa1, mysig); - handler_init (sa2, mysig); - handler_swap (SIGSYS, sa1, osa1); - handler_swap (SIGSEGV, sa2, osa2); - - if (sigsetjmp(setpag_buf, 1) == 0) { -#if defined(_AIX) - int (*dpagaix)(int, int, int, int, int, int); - - if (dpagaix = load(DPAGAIX, 0, 0)) - pag = (*dpagaix)(AFSCALL_SETPAG, new_pag, 0, 0, 0, 0); -#else - pag = syscall(AFS_SYSCALL,AFSCALL_SETPAG, new_pag, 0, 0, 0, 0); -#endif - handler_set (SIGSYS, osa1); - handler_set (SIGSEGV, osa2); - return(pag); - } - - fprintf(stderr,"Setpag failed with a system error\n"); - /* syscall failed! return 0 */ - handler_set (SIGSYS, osa1); - handler_set (SIGSEGV, osa2); - return(-1); -} - -main(argc, argv) - int argc; - char *argv[]; -{ - extern int optind; - extern char *optarg; - int rv; - int rc; - unsigned int pag; - unsigned int newpag = 0; - char ccname[256]; - int nflag = 0; - - while((rv = getopt(argc,argv,"n:")) != -1) { - switch(rv) { - case 'n': - nflag++; - sscanf(optarg,"%8x",&newpag); - break; - default: - printf("Usage: k5dcepagt -n pag \n"); - exit(1); - } - } - - if (nflag) { - fprintf (stderr,"calling k5dcepag newpag=%8.8x\n",newpag); - pag = krb5_dfs_newpag(newpag); - - fprintf (stderr,"PAG returned = %8.8x\n",pag); - if ((pag != 0) && (pag != -1)) { - sprintf (ccname, - "FILE:/opt/dcelocal/var/security/creds/dcecred_%8.8x", - pag); - esetenv("KRB5CCNAME",ccname,1); - execl("/bin/csh","csh",0); - } - else { - fprintf(stderr," Not a good pag value\n"); - } - } -} diff --git a/crypto/heimdal/appl/kx/ChangeLog b/crypto/heimdal/appl/kx/ChangeLog deleted file mode 100644 index 1f00507..0000000 --- a/crypto/heimdal/appl/kx/ChangeLog +++ /dev/null @@ -1,354 +0,0 @@ -2002-08-22 Johan Danielsson - - * common.c: remove only reference to strndup - -2002-05-07 Johan Danielsson - - * krb5.c: use krb5_warn where appropriate - -2002-03-18 Johan Danielsson - - * rxtelnet.in, rxterm.in: add forward (-f) option - -2001-09-17 Assar Westerlund - - * kx.h: add a kludge to make it build on aix (that defines NOERROR - in both sys/stream.h and arpa/nameser.h and considers that a fatal - error) - -2001-07-12 Assar Westerlund - - * common.c (connect_local_xsocket): handle a tcp socket as last - resort - - * rxterm.in: add -K (send arguments to kx) - * rxtelnet.in: add -K (send arguments to kx) - -2001-06-21 Assar Westerlund - - * rxterm.in: add -b for pointing to the rsh program. from - - * rxtelnet.in: add -b for pointing to the telnet program. from - - -2001-01-17 Johan Danielsson - - * common.c: don't write to string constants - -2000-12-31 Assar Westerlund - - * krb5.c (krb5_make_context): handle krb5_init_context failure - consistently - -2000-10-08 Assar Westerlund - - * kxd.c (doit_passive): check that fds are not too large to select - on - * kx.c (doit_active): check that fds are not too large to select - on - * krb5.c (krb5_copy_encrypted): check that fds are not too large - to select on - * krb4.c (krb4_copy_encrypted): check that fds are not too large - to select on - -2000-07-17 Johan Danielsson - - * Makefile.am: use conditional for X - -2000-06-10 Assar Westerlund - - * Makefile.in: use INSTALL_SCRIPT for installing rxterm, rxtelnet, - tenletxr - -2000-04-19 Assar Westerlund - - * common.c: try hostname uncanonified if getaddrinfo() fails - -2000-02-06 Assar Westerlund - - * kx.h: remove old prorotypes - -2000-01-08 Assar Westerlund - - * common.c (match_local_auth): handle ai_canonname being set in - any of the addresses returnedby getaddrinfo. glibc apparently - returns the reverse lookup of every address in ai_canonname. - -1999-12-28 Assar Westerlund - - * kxd.c (main): call krb5_getportbyname with the default in - host-byte-order - -1999-12-17 Assar Westerlund - - * common.c (match_local_auth): remove extra brace. spotted by - Jakob Schlyter - -1999-12-16 Assar Westerlund - - * common.c (match_local_auth): handle ai_canonname not being set - -1999-12-06 Assar Westerlund - - * krb4.c (krb4_authenticate): the NAT address might not be the one - for the relevant realm, try anyway. - * kxd.c (recv_conn): type correctness - * kx.c (connect_host): typo - -1999-12-05 Assar Westerlund - - * common.c (INADDR_LOOPBACK): remove. now in roken. - - * kxd.c (recv_conn): use getnameinfo_verified - * kxd.c (recv_conn): replace inaddr2str with getnameinfo - -1999-12-04 Assar Westerlund - - * kx.c (connect_host): use getaddrinfo - * common.c (find_auth_cookie, match_local_auth): re-write to use - getaddrinfo - -1999-11-27 Assar Westerlund - - * kxd.c (recv_conn): better errors when getting unrecognized data - -1999-11-25 Assar Westerlund - - * krb4.c (krb4_authenticate): obtain the `local' address when - doing NAT. also turn on passive mode. From - -1999-11-18 Assar Westerlund - - * krb5.c (krb5_destroy): free the correct part of the context - -1999-11-02 Assar Westerlund - - * kx.c (main): redo the v4/v5 selection for consistency. -4 -> - try only v4 -5 -> try only v5 none, -45 -> try v5, v4 - -1999-10-10 Assar Westerlund - - * Makefile.am (CLEANFILES): add generated files so that they get - cleaned away - -1999-09-29 Assar Westerlund - - * common.c (match_local_auth): only look for FamilyLocal (and - FamilyWild) cookies. This will not work when we start talking tcp - to the local X-server but `connect_local_xsocket' and the rest of - the code doesn't handle it anyway and the old code could (and did) - pick up the wrong cookie sometimes. If we have to match - FamilyInternet cookies, the search order has to be changed anyway - -1999-09-02 Assar Westerlund - - * kxd.c (childhandler): watch for child `wait_on_pid' to die. - (recv_conn): set `wait_on_pid' instead of looping on waitpid here - also. This should solve the problem of kxd looping which was - caused by the signal handler getting invoked before this waitpid - and reaping the child leaving this poor loop without any child - -1999-08-19 Assar Westerlund - - * kxd.c (recv_conn): give better error message - (doit_active): don't die if fork gives EAGAIN - -1999-08-19 Johan Danielsson - - * kxd.c (recv_conn): call setjob on crays; - (doit_passive): if fork fails with EAGAIN, don't shutdown, just close - the connection re-implement `-t' flag - -1999-07-12 Assar Westerlund - - * Makefile.am: handle not building X programs - -1999-06-23 Assar Westerlund - - * kx.c: conditionalize krb_enable_debug - -1999-06-20 Assar Westerlund - - * kxd.c (main): hopefully do inetd confusion right - -1999-06-15 Assar Westerlund - - * krb4.c (krb4_authenticate): get rid of a warning - - * kx.h: const-pollution - - * kx.c: use get_default_username and resulting const pollution - - * context.c (context_set): const pollution - -1999-05-22 Assar Westerlund - - * kxd.c (recv_conn): fix syslog messages - (main): fix inetd_flag thinko - -1999-05-21 Assar Westerlund - - * kx.c (main): don't byte-swap the argument to krb5_getportbyname - - * kx.c (main): try to use $USERNAME - -1999-05-10 Assar Westerlund - - * Makefile.in (SOURCES*): update sources list - - * kx.c (main): forgot to conditionalize some KRB5 code - - * kxd.c (main): use getarg - (*): handle v4 and/or v5 - - * kx.h: update - - * kx.c (main): use getarg. - (*): handle v4 and/or v5 - - * common.c (do_enccopy, copy_encrypted): remove use - net_{read,write} instead of krb_net_{read,write} - (krb_get_int, krb_put_int): include fallback of these for when we - compile without krb4 - - * Makefile.am (*_SOURCES): remove encdata, add krb[45].c, - context.c - (LDADD): add krb5 - - * krb4.c, krb5.c, context.c: new files - -1999-05-08 Assar Westerlund - - * kxd.c (doit_passive): handle error code from - create_and_write_cookie - - * kx.c (doit_active): handle error code from - create_and_write_cookie - - * common.c (create_and_write_cookie): try to return better (and - correct) errors. Based on a patch from Love - - * common.c (try_pie): more braces - (match_local_auth): new function - (find_auth_cookie): new function - (replace_cookie): don't just take the first auth cookie. based on - patch from Ake Sandgren - -Wed Apr 7 23:39:23 1999 Assar Westerlund - - * common.c (get_xsockets): init local variable to get rid of a gcc - warning - -Thu Apr 1 21:11:36 1999 Johan Danielsson - - * Makefile.in: fix for writeauth.o - -Fri Mar 19 15:12:31 1999 Johan Danielsson - - * kx.c: add gcc-braces - -Thu Mar 18 11:18:20 1999 Johan Danielsson - - * Makefile.am: include Makefile.am.common - -Thu Mar 11 14:58:32 1999 Johan Danielsson - - * writeauth.c: protoize - - * common.c: fix some warnings - -Wed Mar 10 19:33:39 1999 Johan Danielsson - - * kxd.c: openlog -> roken_openlog - -Wed Feb 3 22:01:55 1999 Assar Westerlund - - * rxtelnet.in: print out what telnet program we are running. From - - - * tenletxr.in: add --version, [-h | --help], -v - - * rxterm.in: add --version, [-h | --help], -v - - * rxtelnet.in: add --version, [-h | --help], -v - - * Makefile.in (rxterm, rxtelnet, telnetxr): substitute VERSION and - PACKAGE - - * rxtelnet.in: update usage string - -Fri Jan 22 23:51:05 1999 Assar Westerlund - - * common.c (verify_and_remove_cookies): give back a meaningful - error message if we're using the wrong cookie - -Fri Dec 18 17:42:02 1998 Assar Westerlund - - * common.c (replace_cookie): try to handle the case of not finding - any cookies - -Sun Nov 22 10:31:53 1998 Assar Westerlund - - * Makefile.in (WFLAGS): set - -Wed Nov 18 20:25:37 1998 Assar Westerlund - - * rxtelnet.in: new argument -n for not starting any terminal - emulator - - * kx.c (doit_passive): parse $DISPLAY correctly - -Fri Oct 2 06:34:51 1998 Assar Westerlund - - * kx.c (doit_active): check DISPLAY to figure out what local - socket to connect to. From Åke Sandgren - -Thu Oct 1 23:02:29 1998 Johan Danielsson - - * kx.h: case MAY_HAVE_X11_PIPES with Solaris - -Tue Sep 29 02:22:44 1998 Assar Westerlund - - * kx.c: fix from Ake Sandgren - -Mon Sep 28 18:04:03 1998 Johan Danielsson - - * common.c (try_pipe): return -1 if I_PUSH fails with ENOSYS - -Sat Sep 26 17:34:21 1998 Assar Westerlund - - * kxd.c: create sockets before setuid to handle Solaris' strange - permissions on /tmp/.X11-{unix,pipe} - - * common.c (chown_xsockets): new function - - * kx.h (chown_xsockets): new prototype - -Sun Aug 16 18:34:30 1998 Assar Westerlund - - * kxd.c (doit_passive): conditionalize stream pipe code - - * implement support for Solaris's named-pipe X transport - -Thu May 28 17:20:39 1998 Johan Danielsson - - * common.c: fix for (compiler?) bug in solaris 2.4 bind - - * kx.c: get_xsockets returns int, not unsigned - -Wed May 27 04:20:20 1998 Assar Westerlund - - * kxd.c (doit): better error reporting - -Tue May 26 17:41:23 1998 Johan Danielsson - - * kx.c: use krb_enable_debug - -Mon May 25 05:22:18 1998 Assar Westerlund - - * Makefile.in (clean): remove encdata.c - -Fri May 1 07:16:36 1998 Assar Westerlund - - * kx.c: unifdef -DHAVE_H_ERRNO - diff --git a/crypto/heimdal/appl/kx/Makefile b/crypto/heimdal/appl/kx/Makefile deleted file mode 100644 index c539982..0000000 --- a/crypto/heimdal/appl/kx/Makefile +++ /dev/null @@ -1,825 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# appl/kx/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.12 2000/11/15 22:51:08 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = - -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs $(WFLAGS_NOIMPLICITINT) -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_krb4) $(X_CFLAGS) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -bin_PROGRAMS = kx -#bin_PROGRAMS = -bin_SCRIPTS = rxterm rxtelnet tenletxr -#bin_SCRIPTS = -libexec_PROGRAMS = kxd -#libexec_PROGRAMS = - -CLEANFILES = rxterm rxtelnet tenletxr - -#XauWriteAuth_c = writeauth.c - -kx_SOURCES = \ - kx.c \ - kx.h \ - common.c \ - context.c \ - krb4.c \ - krb5.c \ - $(XauWriteAuth_c) - - -EXTRA_kx_SOURCES = writeauth.c - -kxd_SOURCES = \ - kxd.c \ - kx.h \ - common.c \ - context.c \ - krb4.c \ - krb5.c \ - $(XauWriteAuth_c) - - -EXTRA_kxd_SOURCES = writeauth.c - -EXTRA_DIST = rxterm.in rxtelnet.in tenletxr.in - -man_MANS = kx.1 rxtelnet.1 rxterm.1 tenletxr.1 kxd.8 - -LDADD = \ - $(LIB_kafs) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(X_LIBS) $(LIB_XauReadAuth) $(X_PRE_LIBS) $(X_EXTRA_LIBS) - -subdir = appl/kx -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -bin_PROGRAMS = kx$(EXEEXT) -#bin_PROGRAMS = -libexec_PROGRAMS = kxd$(EXEEXT) -#libexec_PROGRAMS = -PROGRAMS = $(bin_PROGRAMS) $(libexec_PROGRAMS) - -#am__objects_1 = writeauth.$(OBJEXT) -am_kx_OBJECTS = kx.$(OBJEXT) common.$(OBJEXT) context.$(OBJEXT) \ - krb4.$(OBJEXT) krb5.$(OBJEXT) $(am__objects_1) -kx_OBJECTS = $(am_kx_OBJECTS) -kx_LDADD = $(LDADD) -kx_DEPENDENCIES = \ - $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la -#kx_DEPENDENCIES = -#kx_DEPENDENCIES = \ -# $(top_builddir)/lib/kafs/libkafs.la \ -# $(top_builddir)/lib/krb5/libkrb5.la \ -# $(top_builddir)/lib/asn1/libasn1.la -##kx_DEPENDENCIES = \ -## $(top_builddir)/lib/kafs/libkafs.la -kx_LDFLAGS = -am_kxd_OBJECTS = kxd.$(OBJEXT) common.$(OBJEXT) context.$(OBJEXT) \ - krb4.$(OBJEXT) krb5.$(OBJEXT) $(am__objects_1) -kxd_OBJECTS = $(am_kxd_OBJECTS) -kxd_LDADD = $(LDADD) -kxd_DEPENDENCIES = \ - $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la -#kxd_DEPENDENCIES = -#kxd_DEPENDENCIES = \ -# $(top_builddir)/lib/kafs/libkafs.la \ -# $(top_builddir)/lib/krb5/libkrb5.la \ -# $(top_builddir)/lib/asn1/libasn1.la -##kxd_DEPENDENCIES = \ -## $(top_builddir)/lib/kafs/libkafs.la -kxd_LDFLAGS = -SCRIPTS = $(bin_SCRIPTS) - - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = $(kx_SOURCES) $(EXTRA_kx_SOURCES) $(kxd_SOURCES) \ - $(EXTRA_kxd_SOURCES) -MANS = $(man_MANS) -DIST_COMMON = ChangeLog Makefile.am Makefile.in -SOURCES = $(kx_SOURCES) $(EXTRA_kx_SOURCES) $(kxd_SOURCES) $(EXTRA_kxd_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/kx/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f; \ - else :; fi; \ - done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(libexecdir)/$$f"; \ - rm -f $(DESTDIR)$(libexecdir)/$$f; \ - done - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -kx$(EXEEXT): $(kx_OBJECTS) $(kx_DEPENDENCIES) - @rm -f kx$(EXEEXT) - $(LINK) $(kx_LDFLAGS) $(kx_OBJECTS) $(kx_LDADD) $(LIBS) -kxd$(EXEEXT): $(kxd_OBJECTS) $(kxd_DEPENDENCIES) - @rm -f kxd$(EXEEXT) - $(LINK) $(kxd_LDFLAGS) $(kxd_OBJECTS) $(kxd_LDADD) $(LIBS) -binSCRIPT_INSTALL = $(INSTALL_SCRIPT) -install-binSCRIPTS: $(bin_SCRIPTS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_SCRIPTS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f $$d$$p; then \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \ - $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(bin_SCRIPTS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ - rm -f $(DESTDIR)$(man1dir)/$$inst; \ - done - -man8dir = $(mandir)/man8 -install-man8: $(man8_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man8dir) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ - done -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ - rm -f $(DESTDIR)$(man8dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(libexecdir) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) $(DESTDIR)$(man8dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \ - clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-binPROGRAMS install-binSCRIPTS \ - install-libexecPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man1 install-man8 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ - uninstall-info-am uninstall-libexecPROGRAMS uninstall-man - -uninstall-man: uninstall-man1 uninstall-man8 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \ - clean-libtool distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-binPROGRAMS \ - install-binSCRIPTS install-data install-data-am \ - install-data-local install-exec install-exec-am install-info \ - install-info-am install-libexecPROGRAMS install-man \ - install-man1 install-man8 install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \ - uninstall-info-am uninstall-libexecPROGRAMS uninstall-man \ - uninstall-man1 uninstall-man8 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -rxterm: rxterm.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/rxterm.in > $@ - chmod +x $@ - -rxtelnet: rxtelnet.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/rxtelnet.in > $@ - chmod +x $@ - -tenletxr: tenletxr.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/tenletxr.in > $@ - chmod +x $@ -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/kx/Makefile.am b/crypto/heimdal/appl/kx/Makefile.am deleted file mode 100644 index ec3f249..0000000 --- a/crypto/heimdal/appl/kx/Makefile.am +++ /dev/null @@ -1,73 +0,0 @@ -# $Id: Makefile.am,v 1.12 2000/11/15 22:51:08 assar Exp $ - -include $(top_srcdir)/Makefile.am.common - -INCLUDES += $(INCLUDE_krb4) $(X_CFLAGS) - -WFLAGS += $(WFLAGS_NOIMPLICITINT) - -if HAVE_X - -bin_PROGRAMS = kx -bin_SCRIPTS = rxterm rxtelnet tenletxr -libexec_PROGRAMS = kxd - -else - -bin_PROGRAMS = -bin_SCRIPTS = -libexec_PROGRAMS = - -endif - -CLEANFILES = rxterm rxtelnet tenletxr - -if NEED_WRITEAUTH -XauWriteAuth_c = writeauth.c -endif - -kx_SOURCES = \ - kx.c \ - kx.h \ - common.c \ - context.c \ - krb4.c \ - krb5.c \ - $(XauWriteAuth_c) - -EXTRA_kx_SOURCES = writeauth.c - -kxd_SOURCES = \ - kxd.c \ - kx.h \ - common.c \ - context.c \ - krb4.c \ - krb5.c \ - $(XauWriteAuth_c) - -EXTRA_kxd_SOURCES = writeauth.c - -EXTRA_DIST = rxterm.in rxtelnet.in tenletxr.in - -man_MANS = kx.1 rxtelnet.1 rxterm.1 tenletxr.1 kxd.8 - -rxterm: rxterm.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/rxterm.in > $@ - chmod +x $@ - -rxtelnet: rxtelnet.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/rxtelnet.in > $@ - chmod +x $@ - -tenletxr: tenletxr.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/tenletxr.in > $@ - chmod +x $@ - -LDADD = \ - $(LIB_kafs) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(X_LIBS) $(LIB_XauReadAuth) $(X_PRE_LIBS) $(X_EXTRA_LIBS) diff --git a/crypto/heimdal/appl/kx/Makefile.in b/crypto/heimdal/appl/kx/Makefile.in deleted file mode 100644 index 7a017e6..0000000 --- a/crypto/heimdal/appl/kx/Makefile.in +++ /dev/null @@ -1,825 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.12 2000/11/15 22:51:08 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ - -WFLAGS = @WFLAGS@ $(WFLAGS_NOIMPLICITINT) -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_krb4) $(X_CFLAGS) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -@HAVE_X_TRUE@bin_PROGRAMS = kx -@HAVE_X_FALSE@bin_PROGRAMS = -@HAVE_X_TRUE@bin_SCRIPTS = rxterm rxtelnet tenletxr -@HAVE_X_FALSE@bin_SCRIPTS = -@HAVE_X_TRUE@libexec_PROGRAMS = kxd -@HAVE_X_FALSE@libexec_PROGRAMS = - -CLEANFILES = rxterm rxtelnet tenletxr - -@NEED_WRITEAUTH_TRUE@XauWriteAuth_c = writeauth.c - -kx_SOURCES = \ - kx.c \ - kx.h \ - common.c \ - context.c \ - krb4.c \ - krb5.c \ - $(XauWriteAuth_c) - - -EXTRA_kx_SOURCES = writeauth.c - -kxd_SOURCES = \ - kxd.c \ - kx.h \ - common.c \ - context.c \ - krb4.c \ - krb5.c \ - $(XauWriteAuth_c) - - -EXTRA_kxd_SOURCES = writeauth.c - -EXTRA_DIST = rxterm.in rxtelnet.in tenletxr.in - -man_MANS = kx.1 rxtelnet.1 rxterm.1 tenletxr.1 kxd.8 - -LDADD = \ - $(LIB_kafs) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(X_LIBS) $(LIB_XauReadAuth) $(X_PRE_LIBS) $(X_EXTRA_LIBS) - -subdir = appl/kx -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -@HAVE_X_TRUE@bin_PROGRAMS = kx$(EXEEXT) -@HAVE_X_FALSE@bin_PROGRAMS = -@HAVE_X_TRUE@libexec_PROGRAMS = kxd$(EXEEXT) -@HAVE_X_FALSE@libexec_PROGRAMS = -PROGRAMS = $(bin_PROGRAMS) $(libexec_PROGRAMS) - -@NEED_WRITEAUTH_TRUE@am__objects_1 = writeauth.$(OBJEXT) -am_kx_OBJECTS = kx.$(OBJEXT) common.$(OBJEXT) context.$(OBJEXT) \ - krb4.$(OBJEXT) krb5.$(OBJEXT) $(am__objects_1) -kx_OBJECTS = $(am_kx_OBJECTS) -kx_LDADD = $(LDADD) -@KRB4_FALSE@@KRB5_TRUE@kx_DEPENDENCIES = \ -@KRB4_FALSE@@KRB5_TRUE@ $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB4_FALSE@@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB4_FALSE@@KRB5_FALSE@kx_DEPENDENCIES = -@KRB4_TRUE@@KRB5_TRUE@kx_DEPENDENCIES = \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/kafs/libkafs.la \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB4_TRUE@@KRB5_FALSE@kx_DEPENDENCIES = \ -@KRB4_TRUE@@KRB5_FALSE@ $(top_builddir)/lib/kafs/libkafs.la -kx_LDFLAGS = -am_kxd_OBJECTS = kxd.$(OBJEXT) common.$(OBJEXT) context.$(OBJEXT) \ - krb4.$(OBJEXT) krb5.$(OBJEXT) $(am__objects_1) -kxd_OBJECTS = $(am_kxd_OBJECTS) -kxd_LDADD = $(LDADD) -@KRB4_FALSE@@KRB5_TRUE@kxd_DEPENDENCIES = \ -@KRB4_FALSE@@KRB5_TRUE@ $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB4_FALSE@@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB4_FALSE@@KRB5_FALSE@kxd_DEPENDENCIES = -@KRB4_TRUE@@KRB5_TRUE@kxd_DEPENDENCIES = \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/kafs/libkafs.la \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB4_TRUE@@KRB5_FALSE@kxd_DEPENDENCIES = \ -@KRB4_TRUE@@KRB5_FALSE@ $(top_builddir)/lib/kafs/libkafs.la -kxd_LDFLAGS = -SCRIPTS = $(bin_SCRIPTS) - - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = $(kx_SOURCES) $(EXTRA_kx_SOURCES) $(kxd_SOURCES) \ - $(EXTRA_kxd_SOURCES) -MANS = $(man_MANS) -DIST_COMMON = ChangeLog Makefile.am Makefile.in -SOURCES = $(kx_SOURCES) $(EXTRA_kx_SOURCES) $(kxd_SOURCES) $(EXTRA_kxd_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/kx/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f; \ - else :; fi; \ - done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(libexecdir)/$$f"; \ - rm -f $(DESTDIR)$(libexecdir)/$$f; \ - done - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -kx$(EXEEXT): $(kx_OBJECTS) $(kx_DEPENDENCIES) - @rm -f kx$(EXEEXT) - $(LINK) $(kx_LDFLAGS) $(kx_OBJECTS) $(kx_LDADD) $(LIBS) -kxd$(EXEEXT): $(kxd_OBJECTS) $(kxd_DEPENDENCIES) - @rm -f kxd$(EXEEXT) - $(LINK) $(kxd_LDFLAGS) $(kxd_OBJECTS) $(kxd_LDADD) $(LIBS) -binSCRIPT_INSTALL = $(INSTALL_SCRIPT) -install-binSCRIPTS: $(bin_SCRIPTS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_SCRIPTS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f $$d$$p; then \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \ - $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(bin_SCRIPTS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ - rm -f $(DESTDIR)$(man1dir)/$$inst; \ - done - -man8dir = $(mandir)/man8 -install-man8: $(man8_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man8dir) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ - done -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ - rm -f $(DESTDIR)$(man8dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(libexecdir) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) $(DESTDIR)$(man8dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \ - clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-binPROGRAMS install-binSCRIPTS \ - install-libexecPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man1 install-man8 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ - uninstall-info-am uninstall-libexecPROGRAMS uninstall-man - -uninstall-man: uninstall-man1 uninstall-man8 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \ - clean-libtool distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am info \ - info-am install install-am install-binPROGRAMS \ - install-binSCRIPTS install-data install-data-am \ - install-data-local install-exec install-exec-am install-info \ - install-info-am install-libexecPROGRAMS install-man \ - install-man1 install-man8 install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \ - uninstall-info-am uninstall-libexecPROGRAMS uninstall-man \ - uninstall-man1 uninstall-man8 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -rxterm: rxterm.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/rxterm.in > $@ - chmod +x $@ - -rxtelnet: rxtelnet.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/rxtelnet.in > $@ - chmod +x $@ - -tenletxr: tenletxr.in - sed -e "s!%bindir%!$(bindir)!" $(srcdir)/tenletxr.in > $@ - chmod +x $@ -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/kx/common.c b/crypto/heimdal/appl/kx/common.c deleted file mode 100644 index 223c6bb..0000000 --- a/crypto/heimdal/appl/kx/common.c +++ /dev/null @@ -1,812 +0,0 @@ -/* - * Copyright (c) 1995 - 2001 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "kx.h" - -RCSID("$Id: common.c,v 1.66 2002/08/22 16:23:28 joda Exp $"); - -char x_socket[MaxPathLen]; - -u_int32_t display_num; -char display[MaxPathLen]; -int display_size = sizeof(display); -char xauthfile[MaxPathLen]; -int xauthfile_size = sizeof(xauthfile); -u_char cookie[16]; -size_t cookie_len = sizeof(cookie); - -#ifndef X_UNIX_PATH -#define X_UNIX_PATH "/tmp/.X11-unix/X" -#endif - -#ifndef X_PIPE_PATH -#define X_PIPE_PATH "/tmp/.X11-pipe/X" -#endif - -/* - * Allocate a unix domain socket in `s' for display `dpy' and with - * filename `pattern' - * - * 0 if all is OK - * -1 if bind failed badly - * 1 if dpy is already used */ - -static int -try_socket (struct x_socket *s, int dpy, const char *pattern) -{ - struct sockaddr_un addr; - int fd; - - fd = socket (AF_UNIX, SOCK_STREAM, 0); - if (fd < 0) - err (1, "socket AF_UNIX"); - memset (&addr, 0, sizeof(addr)); - addr.sun_family = AF_UNIX; - snprintf (addr.sun_path, sizeof(addr.sun_path), pattern, dpy); - if(bind(fd, - (struct sockaddr *)&addr, - sizeof(addr)) < 0) { - close (fd); - if (errno == EADDRINUSE || - errno == EACCES /* Cray return EACCESS */ -#ifdef ENOTUNIQ - || errno == ENOTUNIQ /* bug in Solaris 2.4 */ -#endif - ) - return 1; - else - return -1; - } - s->fd = fd; - s->pathname = strdup (addr.sun_path); - if (s->pathname == NULL) - errx (1, "strdup: out of memory"); - s->flags = UNIX_SOCKET; - return 0; -} - -#ifdef MAY_HAVE_X11_PIPES -/* - * Allocate a stream (masqueraded as a named pipe) - * - * 0 if all is OK - * -1 if bind failed badly - * 1 if dpy is already used - */ - -static int -try_pipe (struct x_socket *s, int dpy, const char *pattern) -{ - char path[MAXPATHLEN]; - int ret; - int fd; - int pipefd[2]; - - snprintf (path, sizeof(path), pattern, dpy); - fd = open (path, O_WRONLY | O_CREAT | O_EXCL, 0600); - if (fd < 0) { - if (errno == EEXIST) - return 1; - else - return -1; - } - - close (fd); - - ret = pipe (pipefd); - if (ret < 0) - err (1, "pipe"); - - ret = ioctl (pipefd[1], I_PUSH, "connld"); - if (ret < 0) { - if(errno == ENOSYS) - return -1; - err (1, "ioctl I_PUSH"); - } - - ret = fattach (pipefd[1], path); - if (ret < 0) - err (1, "fattach %s", path); - - s->fd = pipefd[0]; - close (pipefd[1]); - s->pathname = strdup (path); - if (s->pathname == NULL) - errx (1, "strdup: out of memory"); - s->flags = STREAM_PIPE; - return 0; -} -#endif /* MAY_HAVE_X11_PIPES */ - -/* - * Try to create a TCP socket in `s' corresponding to display `dpy'. - * - * 0 if all is OK - * -1 if bind failed badly - * 1 if dpy is already used - */ - -static int -try_tcp (struct x_socket *s, int dpy) -{ - struct sockaddr_in tcpaddr; - struct in_addr local; - int one = 1; - int fd; - - memset(&local, 0, sizeof(local)); - local.s_addr = htonl(INADDR_LOOPBACK); - - fd = socket (AF_INET, SOCK_STREAM, 0); - if (fd < 0) - err (1, "socket AF_INET"); -#if defined(TCP_NODELAY) && defined(HAVE_SETSOCKOPT) - setsockopt (fd, IPPROTO_TCP, TCP_NODELAY, (void *)&one, - sizeof(one)); -#endif - memset (&tcpaddr, 0, sizeof(tcpaddr)); - tcpaddr.sin_family = AF_INET; - tcpaddr.sin_addr = local; - tcpaddr.sin_port = htons(6000 + dpy); - if (bind (fd, (struct sockaddr *)&tcpaddr, - sizeof(tcpaddr)) < 0) { - close (fd); - if (errno == EADDRINUSE) - return 1; - else - return -1; - } - s->fd = fd; - s->pathname = NULL; - s->flags = TCP; - return 0; -} - -/* - * The potential places to create unix sockets. - */ - -static char *x_sockets[] = { -X_UNIX_PATH "%u", -"/var/X/.X11-unix/X" "%u", -"/usr/spool/sockets/X11/" "%u", -NULL -}; - -/* - * Dito for stream pipes. - */ - -#ifdef MAY_HAVE_X11_PIPES -static char *x_pipes[] = { -X_PIPE_PATH "%u", -"/var/X/.X11-pipe/X" "%u", -NULL -}; -#endif - -/* - * Create the directory corresponding to dirname of `path' or fail. - */ - -static void -try_mkdir (const char *path) -{ - char *dir; - char *p; - int oldmask; - - if((dir = strdup (path)) == NULL) - errx (1, "strdup: out of memory"); - p = strrchr (dir, '/'); - if (p) - *p = '\0'; - - oldmask = umask(0); - mkdir (dir, 01777); - umask (oldmask); - free (dir); -} - -/* - * Allocate a display, returning the number of sockets in `number' and - * all the corresponding sockets in `sockets'. If `tcp_socket' is - * true, also allcoaet a TCP socket. - * - * The return value is the display allocated or -1 if an error occurred. - */ - -int -get_xsockets (int *number, struct x_socket **sockets, int tcp_socket) -{ - int dpy; - struct x_socket *s; - int n; - int i; - - s = malloc (sizeof(*s) * 5); - if (s == NULL) - errx (1, "malloc: out of memory"); - - try_mkdir (X_UNIX_PATH); - try_mkdir (X_PIPE_PATH); - - for(dpy = 4; dpy < 256; ++dpy) { - char **path; - int tmp = 0; - - n = 0; - for (path = x_sockets; *path; ++path) { - tmp = try_socket (&s[n], dpy, *path); - if (tmp == -1) { - if (errno != ENOTDIR && errno != ENOENT) - return -1; - } else if (tmp == 1) { - while(--n >= 0) { - close (s[n].fd); - free (s[n].pathname); - } - break; - } else if (tmp == 0) - ++n; - } - if (tmp == 1) - continue; - -#ifdef MAY_HAVE_X11_PIPES - for (path = x_pipes; *path; ++path) { - tmp = try_pipe (&s[n], dpy, *path); - if (tmp == -1) { - if (errno != ENOTDIR && errno != ENOENT && errno != ENOSYS) - return -1; - } else if (tmp == 1) { - while (--n >= 0) { - close (s[n].fd); - free (s[n].pathname); - } - break; - } else if (tmp == 0) - ++n; - } - - if (tmp == 1) - continue; -#endif - - if (tcp_socket) { - tmp = try_tcp (&s[n], dpy); - if (tmp == -1) - return -1; - else if (tmp == 1) { - while (--n >= 0) { - close (s[n].fd); - free (s[n].pathname); - } - break; - } else if (tmp == 0) - ++n; - } - break; - } - if (dpy == 256) - errx (1, "no free x-servers"); - for (i = 0; i < n; ++i) - if (s[i].flags & LISTENP - && listen (s[i].fd, SOMAXCONN) < 0) - err (1, "listen %s", s[i].pathname ? s[i].pathname : "tcp"); - *number = n; - *sockets = s; - return dpy; -} - -/* - * Change owner on the `n' sockets in `sockets' to `uid', `gid'. - * Return 0 is succesful or -1 if an error occurred. - */ - -int -chown_xsockets (int n, struct x_socket *sockets, uid_t uid, gid_t gid) -{ - int i; - - for (i = 0; i < n; ++i) - if (sockets[i].pathname != NULL) - if (chown (sockets[i].pathname, uid, gid) < 0) - return -1; - return 0; -} - -/* - * Connect to local display `dnr' with local transport or TCP. - * Return a file descriptor. - */ - -int -connect_local_xsocket (unsigned dnr) -{ - int fd; - char **path; - - for (path = x_sockets; *path; ++path) { - struct sockaddr_un addr; - - fd = socket (AF_UNIX, SOCK_STREAM, 0); - if (fd < 0) - break; - memset (&addr, 0, sizeof(addr)); - addr.sun_family = AF_UNIX; - snprintf (addr.sun_path, sizeof(addr.sun_path), *path, dnr); - if (connect (fd, (struct sockaddr *)&addr, sizeof(addr)) == 0) - return fd; - close(fd); - } - { - struct sockaddr_in addr; - - fd = socket(AF_INET, SOCK_STREAM, 0); - if (fd < 0) - err (1, "socket AF_INET"); - memset (&addr, 0, sizeof(addr)); - addr.sin_family = AF_INET; - addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); - addr.sin_port = htons(6000 + dnr); - if (connect(fd, (struct sockaddr *)&addr, sizeof(addr)) == 0) - return fd; - close(fd); - } - err (1, "connecting to local display %u", dnr); -} - -/* - * Create a cookie file with a random cookie for the localhost. The - * file name will be stored in `xauthfile' (but not larger than - * `xauthfile_size'), and the cookie returned in `cookie', `cookie_sz'. - * Return 0 if succesful, or errno. - */ - -int -create_and_write_cookie (char *xauthfile, - size_t xauthfile_size, - u_char *cookie, - size_t cookie_sz) -{ - Xauth auth; - char tmp[64]; - int fd; - FILE *f; - char hostname[MaxHostNameLen]; - struct in_addr loopback; - int saved_errno; - - gethostname (hostname, sizeof(hostname)); - loopback.s_addr = htonl(INADDR_LOOPBACK); - - auth.family = FamilyLocal; - auth.address = hostname; - auth.address_length = strlen(auth.address); - snprintf (tmp, sizeof(tmp), "%d", display_num); - auth.number_length = strlen(tmp); - auth.number = tmp; - auth.name = COOKIE_TYPE; - auth.name_length = strlen(auth.name); - auth.data_length = cookie_sz; - auth.data = (char*)cookie; -#ifdef KRB5 - krb5_generate_random_block (cookie, cookie_sz); -#else - krb_generate_random_block (cookie, cookie_sz); -#endif - - strlcpy(xauthfile, "/tmp/AXXXXXX", xauthfile_size); - fd = mkstemp(xauthfile); - if(fd < 0) { - saved_errno = errno; - syslog(LOG_ERR, "create_and_write_cookie: mkstemp: %m"); - return saved_errno; - } - f = fdopen(fd, "r+"); - if(f == NULL){ - saved_errno = errno; - close(fd); - return errno; - } - if(XauWriteAuth(f, &auth) == 0) { - saved_errno = errno; - fclose(f); - return saved_errno; - } - - /* - * I would like to write a cookie for localhost:n here, but some - * stupid code in libX11 will not look for cookies of that type, - * so we are forced to use FamilyWild instead. - */ - - auth.family = FamilyWild; - auth.address_length = 0; - -#if 0 /* XXX */ - auth.address = (char *)&loopback; - auth.address_length = sizeof(loopback); -#endif - - if (XauWriteAuth(f, &auth) == 0) { - saved_errno = errno; - fclose (f); - return saved_errno; - } - - if(fclose(f)) - return errno; - return 0; -} - -/* - * Verify and remove cookies. Read and parse a X-connection from - * `fd'. Check the cookie used is the same as in `cookie'. Remove the - * cookie and copy the rest of it to `sock'. - * Expect cookies iff cookiesp. - * Return 0 iff ok. - * - * The protocol is as follows: - * - * C->S: [Bl] 1 - * unused 1 - * protocol major version 2 - * protocol minor version 2 - * length of auth protocol name(n) 2 - * length of auth protocol data 2 - * unused 2 - * authorization protocol name n - * pad pad(n) - * authorization protocol data d - * pad pad(d) - * - * S->C: Failed - * 0 1 - * length of reason 1 - * protocol major version 2 - * protocol minor version 2 - * length in 4 bytes unit of - * additional data (n+p)/4 2 - * reason n - * unused p = pad(n) - */ - -int -verify_and_remove_cookies (int fd, int sock, int cookiesp) -{ - u_char beg[12]; - int bigendianp; - unsigned n, d, npad, dpad; - char *protocol_name, *protocol_data; - u_char zeros[6] = {0, 0, 0, 0, 0, 0}; - u_char refused[20] = {0, 10, - 0, 0, /* protocol major version */ - 0, 0, /* protocol minor version */ - 0, 0, /* length of additional data / 4 */ - 'b', 'a', 'd', ' ', 'c', 'o', 'o', 'k', 'i', 'e', - 0, 0}; - - if (net_read (fd, beg, sizeof(beg)) != sizeof(beg)) - return 1; - if (net_write (sock, beg, 6) != 6) - return 1; - bigendianp = beg[0] == 'B'; - if (bigendianp) { - n = (beg[6] << 8) | beg[7]; - d = (beg[8] << 8) | beg[9]; - } else { - n = (beg[7] << 8) | beg[6]; - d = (beg[9] << 8) | beg[8]; - } - npad = (4 - (n % 4)) % 4; - dpad = (4 - (d % 4)) % 4; - protocol_name = malloc(n + npad); - if (n + npad != 0 && protocol_name == NULL) - return 1; - protocol_data = malloc(d + dpad); - if (d + dpad != 0 && protocol_data == NULL) { - free (protocol_name); - return 1; - } - if (net_read (fd, protocol_name, n + npad) != n + npad) - goto fail; - if (net_read (fd, protocol_data, d + dpad) != d + dpad) - goto fail; - if (cookiesp) { - if (strncmp (protocol_name, COOKIE_TYPE, strlen(COOKIE_TYPE)) != 0) - goto refused; - if (d != cookie_len || - memcmp (protocol_data, cookie, cookie_len) != 0) - goto refused; - } - free (protocol_name); - free (protocol_data); - if (net_write (sock, zeros, 6) != 6) - return 1; - return 0; -refused: - refused[2] = beg[2]; - refused[3] = beg[3]; - refused[4] = beg[4]; - refused[5] = beg[5]; - if (bigendianp) - refused[7] = 3; - else - refused[6] = 3; - - net_write (fd, refused, sizeof(refused)); -fail: - free (protocol_name); - free (protocol_data); - return 1; -} - -/* - * Return 0 iff `cookie' is compatible with the cookie for the - * localhost with name given in `ai' (or `hostname') and display - * number in `disp_nr'. - */ - -static int -match_local_auth (Xauth* auth, - struct addrinfo *ai, const char *hostname, int disp_nr) -{ - int auth_disp; - char *tmp_disp; - struct addrinfo *a; - - tmp_disp = malloc(auth->number_length + 1); - if (tmp_disp == NULL) - return -1; - memcpy(tmp_disp, auth->number, auth->number_length); - tmp_disp[auth->number_length] = '\0'; - auth_disp = atoi(tmp_disp); - free (tmp_disp); - if (auth_disp != disp_nr) - return 1; - for (a = ai; a != NULL; a = a->ai_next) { - if ((auth->family == FamilyLocal - || auth->family == FamilyWild) - && a->ai_canonname != NULL - && strncmp (auth->address, - a->ai_canonname, - auth->address_length) == 0) - return 0; - } - if (hostname != NULL - && (auth->family == FamilyLocal - || auth->family == FamilyWild) - && strncmp (auth->address, hostname, auth->address_length) == 0) - return 0; - return 1; -} - -/* - * Find `our' cookie from the cookie file `f' and return it or NULL. - */ - -static Xauth* -find_auth_cookie (FILE *f) -{ - Xauth *ret = NULL; - char local_hostname[MaxHostNameLen]; - char *display = getenv("DISPLAY"); - char d[MaxHostNameLen + 4]; - char *colon; - struct addrinfo *ai; - struct addrinfo hints; - int disp; - int error; - - if(display == NULL) - display = ":0"; - strlcpy(d, display, sizeof(d)); - display = d; - colon = strchr (display, ':'); - if (colon == NULL) - disp = 0; - else { - *colon = '\0'; - disp = atoi (colon + 1); - } - if (strcmp (display, "") == 0 - || strncmp (display, "unix", 4) == 0 - || strncmp (display, "localhost", 9) == 0) { - gethostname (local_hostname, sizeof(local_hostname)); - display = local_hostname; - } - memset (&hints, 0, sizeof(hints)); - hints.ai_flags = AI_CANONNAME; - hints.ai_socktype = SOCK_STREAM; - hints.ai_protocol = IPPROTO_TCP; - - error = getaddrinfo (display, NULL, &hints, &ai); - if (error) - ai = NULL; - - for (; (ret = XauReadAuth (f)) != NULL; XauDisposeAuth(ret)) { - if (match_local_auth (ret, ai, display, disp) == 0) { - if (ai != NULL) - freeaddrinfo (ai); - return ret; - } - } - if (ai != NULL) - freeaddrinfo (ai); - return NULL; -} - -/* - * Get rid of the cookie that we were sent and get the correct one - * from our own cookie file instead. - */ - -int -replace_cookie(int xserver, int fd, char *filename, int cookiesp) /* XXX */ -{ - u_char beg[12]; - int bigendianp; - unsigned n, d, npad, dpad; - FILE *f; - u_char zeros[6] = {0, 0, 0, 0, 0, 0}; - - if (net_read (fd, beg, sizeof(beg)) != sizeof(beg)) - return 1; - if (net_write (xserver, beg, 6) != 6) - return 1; - bigendianp = beg[0] == 'B'; - if (bigendianp) { - n = (beg[6] << 8) | beg[7]; - d = (beg[8] << 8) | beg[9]; - } else { - n = (beg[7] << 8) | beg[6]; - d = (beg[9] << 8) | beg[8]; - } - if (n != 0 || d != 0) - return 1; - f = fopen(filename, "r"); - if (f != NULL) { - Xauth *auth = find_auth_cookie (f); - u_char len[6] = {0, 0, 0, 0, 0, 0}; - - fclose (f); - - if (auth != NULL) { - n = auth->name_length; - d = auth->data_length; - } else { - n = 0; - d = 0; - } - if (bigendianp) { - len[0] = n >> 8; - len[1] = n & 0xFF; - len[2] = d >> 8; - len[3] = d & 0xFF; - } else { - len[0] = n & 0xFF; - len[1] = n >> 8; - len[2] = d & 0xFF; - len[3] = d >> 8; - } - if (net_write (xserver, len, 6) != 6) { - XauDisposeAuth(auth); - return 1; - } - if(n != 0 && net_write (xserver, auth->name, n) != n) { - XauDisposeAuth(auth); - return 1; - } - npad = (4 - (n % 4)) % 4; - if (npad && net_write (xserver, zeros, npad) != npad) { - XauDisposeAuth(auth); - return 1; - } - if (d != 0 && net_write (xserver, auth->data, d) != d) { - XauDisposeAuth(auth); - return 1; - } - XauDisposeAuth(auth); - dpad = (4 - (d % 4)) % 4; - if (dpad && net_write (xserver, zeros, dpad) != dpad) - return 1; - } else { - if(net_write(xserver, zeros, 6) != 6) - return 1; - } - return 0; -} - -/* - * Some simple controls on the address and corresponding socket - */ - -int -suspicious_address (int sock, struct sockaddr_in addr) -{ - char data[40]; - socklen_t len = sizeof(data); - - return addr.sin_addr.s_addr != htonl(INADDR_LOOPBACK) -#if defined(IP_OPTIONS) && defined(HAVE_GETSOCKOPT) - || getsockopt (sock, IPPROTO_IP, IP_OPTIONS, data, &len) < 0 - || len != 0 -#endif - ; -} - -/* - * This really sucks, but these functions are used and if we're not - * linking against libkrb they don't exist. Using the heimdal storage - * functions will not work either cause we do not always link with - * libkrb5 either. - */ - -#ifndef KRB4 - -int -krb_get_int(void *f, u_int32_t *to, int size, int lsb) -{ - int i; - unsigned char *from = (unsigned char *)f; - - *to = 0; - if(lsb){ - for(i = size-1; i >= 0; i--) - *to = (*to << 8) | from[i]; - }else{ - for(i = 0; i < size; i++) - *to = (*to << 8) | from[i]; - } - return size; -} - -int -krb_put_int(u_int32_t from, void *to, size_t rem, int size) -{ - int i; - unsigned char *p = (unsigned char *)to; - - if (rem < size) - return -1; - - for(i = size - 1; i >= 0; i--){ - p[i] = from & 0xff; - from >>= 8; - } - return size; -} - -#endif /* !KRB4 */ diff --git a/crypto/heimdal/appl/kx/context.c b/crypto/heimdal/appl/kx/context.c deleted file mode 100644 index bbc8da9..0000000 --- a/crypto/heimdal/appl/kx/context.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Copyright (c) 1995 - 1999 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "kx.h" - -RCSID("$Id: context.c,v 1.4 1999/12/02 16:58:32 joda Exp $"); - -/* - * Set the common part of the context `kc' - */ - -void -context_set (kx_context *kc, const char *host, const char *user, int port, - int debug_flag, int keepalive_flag, int tcp_flag) -{ - kc->host = host; - kc->user = user; - kc->port = port; - kc->debug_flag = debug_flag; - kc->keepalive_flag = keepalive_flag; - kc->tcp_flag = tcp_flag; -} - -/* - * dispatch functions - */ - -void -context_destroy (kx_context *kc) -{ - (*kc->destroy)(kc); -} - -int -context_authenticate (kx_context *kc, int s) -{ - return (*kc->authenticate)(kc, s); -} - -int -context_userok (kx_context *kc, char *user) -{ - return (*kc->userok)(kc, user); -} - -ssize_t -kx_read (kx_context *kc, int fd, void *buf, size_t len) -{ - return (*kc->read)(kc, fd, buf, len); -} - -ssize_t -kx_write (kx_context *kc, int fd, const void *buf, size_t len) -{ - return (*kc->write)(kc, fd, buf, len); -} - -int -copy_encrypted (kx_context *kc, int fd1, int fd2) -{ - return (*kc->copy_encrypted)(kc, fd1, fd2); -} diff --git a/crypto/heimdal/appl/kx/krb4.c b/crypto/heimdal/appl/kx/krb4.c deleted file mode 100644 index 07852c9..0000000 --- a/crypto/heimdal/appl/kx/krb4.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "kx.h" - -RCSID("$Id: krb4.c,v 1.8 2000/10/08 13:19:22 assar Exp $"); - -#ifdef KRB4 - -struct krb4_kx_context { - des_cblock key; - des_key_schedule schedule; - AUTH_DAT auth; -}; - -typedef struct krb4_kx_context krb4_kx_context; - -/* - * Destroy the krb4 context in `c'. - */ - -static void -krb4_destroy (kx_context *c) -{ - memset (c->data, 0, sizeof(krb4_kx_context)); - free (c->data); -} - -/* - * Read the authentication information from `s' and return 0 if - * succesful, else -1. - */ - -static int -krb4_authenticate (kx_context *kc, int s) -{ - CREDENTIALS cred; - KTEXT_ST text; - MSG_DAT msg; - int status; - krb4_kx_context *c = (krb4_kx_context *)kc->data; - const char *host = kc->host; - -#ifdef HAVE_KRB_GET_OUR_IP_FOR_REALM - if (krb_get_config_bool("nat_in_use")) { - struct in_addr natAddr; - - if (krb_get_our_ip_for_realm(krb_realmofhost(kc->host), - &natAddr) == KSUCCESS - || krb_get_our_ip_for_realm (NULL, &natAddr) == KSUCCESS) - kc->thisaddr.sin_addr = natAddr; - } -#endif - - status = krb_sendauth (KOPT_DO_MUTUAL, s, &text, "rcmd", - (char *)host, krb_realmofhost (host), - getpid(), &msg, &cred, c->schedule, - &kc->thisaddr, &kc->thataddr, KX_VERSION); - if (status != KSUCCESS) { - warnx ("%s: %s\n", host, krb_get_err_text(status)); - return -1; - } - memcpy (c->key, cred.session, sizeof(des_cblock)); - return 0; -} - -/* - * Read a krb4 priv packet from `fd' into `buf' (of size `len'). - * Return the number of bytes read or 0 on EOF or -1 on error. - */ - -static ssize_t -krb4_read (kx_context *kc, - int fd, void *buf, size_t len) -{ - unsigned char tmp[4]; - ssize_t ret; - size_t l; - int status; - krb4_kx_context *c = (krb4_kx_context *)kc->data; - MSG_DAT msg; - - ret = krb_net_read (fd, tmp, 4); - if (ret == 0) - return ret; - if (ret != 4) - return -1; - l = (tmp[0] << 24) | (tmp[1] << 16) | (tmp[2] << 8) | tmp[3]; - if (l > len) - return -1; - if (krb_net_read (fd, buf, l) != l) - return -1; - status = krb_rd_priv (buf, l, c->schedule, &c->key, - &kc->thataddr, &kc->thisaddr, &msg); - if (status != RD_AP_OK) { - warnx ("krb4_read: %s", krb_get_err_text(status)); - return -1; - } - memmove (buf, msg.app_data, msg.app_length); - return msg.app_length; -} - -/* - * Write a krb4 priv packet on `fd' with the data in `buf, len'. - * Return len or -1 on error - */ - -static ssize_t -krb4_write(kx_context *kc, - int fd, const void *buf, size_t len) -{ - void *outbuf; - krb4_kx_context *c = (krb4_kx_context *)kc->data; - int outlen; - unsigned char tmp[4]; - - outbuf = malloc (len + 30); - if (outbuf == NULL) - return -1; - outlen = krb_mk_priv ((void *)buf, outbuf, len, c->schedule, &c->key, - &kc->thisaddr, &kc->thataddr); - if (outlen < 0) { - free (outbuf); - return -1; - } - tmp[0] = (outlen >> 24) & 0xFF; - tmp[1] = (outlen >> 16) & 0xFF; - tmp[2] = (outlen >> 8) & 0xFF; - tmp[3] = (outlen >> 0) & 0xFF; - - if (krb_net_write (fd, tmp, 4) != 4 || - krb_net_write (fd, outbuf, outlen) != outlen) { - free (outbuf); - return -1; - } - free (outbuf); - return len; -} - -/* - * Copy data from `fd1' to `fd2', {en,de}crypting with cfb64 - * with `mode' and state stored in `iv', `schedule', and `num'. - * Return -1 if error, 0 if eof, else 1 - */ - -static int -do_enccopy (int fd1, int fd2, int mode, des_cblock *iv, - des_key_schedule schedule, int *num) -{ - int ret; - u_char buf[BUFSIZ]; - - ret = read (fd1, buf, sizeof(buf)); - if (ret == 0) - return 0; - if (ret < 0) { - warn ("read"); - return ret; - } -#ifndef NOENCRYPTION - des_cfb64_encrypt (buf, buf, ret, schedule, iv, - num, mode); -#endif - ret = krb_net_write (fd2, buf, ret); - if (ret < 0) { - warn ("write"); - return ret; - } - return 1; -} - -/* - * Copy data between fd1 and fd2, encrypting one way and decrypting - * the other. - */ - -static int -krb4_copy_encrypted (kx_context *kc, - int fd1, int fd2) -{ - krb4_kx_context *c = (krb4_kx_context *)kc->data; - des_cblock iv1, iv2; - int num1 = 0, num2 = 0; - - memcpy (iv1, c->key, sizeof(iv1)); - memcpy (iv2, c->key, sizeof(iv2)); - for (;;) { - fd_set fdset; - int ret; - - if (fd1 >= FD_SETSIZE || fd2 >= FD_SETSIZE) { - warnx ("fd too large"); - return 1; - } - - FD_ZERO(&fdset); - FD_SET(fd1, &fdset); - FD_SET(fd2, &fdset); - - ret = select (max(fd1, fd2)+1, &fdset, NULL, NULL, NULL); - if (ret < 0 && errno != EINTR) { - warn ("select"); - return 1; - } - if (FD_ISSET(fd1, &fdset)) { - ret = do_enccopy (fd1, fd2, DES_ENCRYPT, &iv1, c->schedule, &num1); - if (ret <= 0) - return ret; - } - if (FD_ISSET(fd2, &fdset)) { - ret = do_enccopy (fd2, fd1, DES_DECRYPT, &iv2, c->schedule, &num2); - if (ret <= 0) - return ret; - } - } -} - -/* - * Return 0 if the user authenticated on `kc' is allowed to login as - * `user'. - */ - -static int -krb4_userok (kx_context *kc, char *user) -{ - krb4_kx_context *c = (krb4_kx_context *)kc->data; - char *tmp; - - tmp = krb_unparse_name_long (c->auth.pname, - c->auth.pinst, - c->auth.prealm); - kc->user = strdup (tmp); - if (kc->user == NULL) - err (1, "malloc"); - - - return kuserok (&c->auth, user); -} - -/* - * Create an instance of an krb4 context. - */ - -void -krb4_make_context (kx_context *kc) -{ - kc->authenticate = krb4_authenticate; - kc->userok = krb4_userok; - kc->read = krb4_read; - kc->write = krb4_write; - kc->copy_encrypted = krb4_copy_encrypted; - kc->destroy = krb4_destroy; - kc->user = NULL; - kc->data = malloc(sizeof(krb4_kx_context)); - - if (kc->data == NULL) - err (1, "malloc"); -} - -/* - * Receive authentication information on `sock' (first four bytes - * in `buf'). - */ - -int -recv_v4_auth (kx_context *kc, int sock, u_char *buf) -{ - int status; - KTEXT_ST ticket; - char instance[INST_SZ + 1]; - char version[KRB_SENDAUTH_VLEN + 1]; - krb4_kx_context *c; - AUTH_DAT auth; - des_key_schedule schedule; - - if (memcmp (buf, KRB_SENDAUTH_VERS, 4) != 0) - return -1; - if (net_read (sock, buf + 4, KRB_SENDAUTH_VLEN - 4) != - KRB_SENDAUTH_VLEN - 4) { - syslog (LOG_ERR, "read: %m"); - exit (1); - } - if (memcmp (buf, KRB_SENDAUTH_VERS, KRB_SENDAUTH_VLEN) != 0) { - syslog (LOG_ERR, "unrecognized auth protocol: %.8s", buf); - exit (1); - } - - k_getsockinst (sock, instance, sizeof(instance)); - status = krb_recvauth (KOPT_IGNORE_PROTOCOL | KOPT_DO_MUTUAL, - sock, - &ticket, - "rcmd", - instance, - &kc->thataddr, - &kc->thisaddr, - &auth, - "", - schedule, - version); - if (status != KSUCCESS) { - syslog (LOG_ERR, "krb_recvauth: %s", krb_get_err_text(status)); - exit (1); - } - if (strncmp (version, KX_VERSION, KRB_SENDAUTH_VLEN) != 0) { - /* Try to be nice to old kx's */ - if (strncmp (version, KX_OLD_VERSION, KRB_SENDAUTH_VLEN) == 0) { - char *old_errmsg = "\001Old version of kx. Please upgrade."; - char user[64]; - - syslog (LOG_ERR, "Old version client (%s)", version); - - krb_net_read (sock, user, sizeof(user)); - krb_net_write (sock, old_errmsg, strlen(old_errmsg) + 1); - exit (1); - } else { - syslog (LOG_ERR, "bad version: %s", version); - exit (1); - } - } - - krb4_make_context (kc); - c = (krb4_kx_context *)kc->data; - - c->auth = auth; - memcpy (c->key, &auth.session, sizeof(des_cblock)); - memcpy (c->schedule, schedule, sizeof(schedule)); - - return 0; -} - -#endif /* KRB4 */ diff --git a/crypto/heimdal/appl/kx/krb5.c b/crypto/heimdal/appl/kx/krb5.c deleted file mode 100644 index 509bcb2..0000000 --- a/crypto/heimdal/appl/kx/krb5.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * Copyright (c) 1995 - 2000, 2002 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "kx.h" - -RCSID("$Id: krb5.c,v 1.9 2002/05/24 15:13:52 joda Exp $"); - -#ifdef KRB5 - -struct krb5_kx_context { - krb5_context context; - krb5_keyblock *keyblock; - krb5_crypto crypto; - krb5_principal client; -}; - -typedef struct krb5_kx_context krb5_kx_context; - -/* - * Destroy the krb5 context in `c'. - */ - -static void -krb5_destroy (kx_context *c) -{ - krb5_kx_context *kc = (krb5_kx_context *)c->data; - - if (kc->keyblock) - krb5_free_keyblock (kc->context, kc->keyblock); - if (kc->crypto) - krb5_crypto_destroy (kc->context, kc->crypto); - if (kc->client) - krb5_free_principal (kc->context, kc->client); - if (kc->context) - krb5_free_context (kc->context); - free (kc); -} - -/* - * Read the authentication information from `s' and return 0 if - * succesful, else -1. - */ - -static int -krb5_authenticate (kx_context *kc, int s) -{ - krb5_kx_context *c = (krb5_kx_context *)kc->data; - krb5_context context = c->context; - krb5_auth_context auth_context = NULL; - krb5_error_code ret; - krb5_principal server; - const char *host = kc->host; - - ret = krb5_sname_to_principal (context, - host, "host", KRB5_NT_SRV_HST, &server); - if (ret) { - krb5_warn (context, ret, "krb5_sname_to_principal: %s", host); - return 1; - } - - ret = krb5_sendauth (context, - &auth_context, - &s, - KX_VERSION, - NULL, - server, - AP_OPTS_MUTUAL_REQUIRED, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL); - if (ret) { - if(ret != KRB5_SENDAUTH_BADRESPONSE) - krb5_warn (context, ret, "krb5_sendauth: %s", host); - return 1; - } - - ret = krb5_auth_con_getkey (context, auth_context, &c->keyblock); - if (ret) { - krb5_warn (context, ret, "krb5_auth_con_getkey: %s", host); - krb5_auth_con_free (context, auth_context); - return 1; - } - - ret = krb5_crypto_init (context, c->keyblock, 0, &c->crypto); - if (ret) { - krb5_warn (context, ret, "krb5_crypto_init"); - krb5_auth_con_free (context, auth_context); - return 1; - } - return 0; -} - -/* - * Read an encapsulated krb5 packet from `fd' into `buf' (of size - * `len'). Return the number of bytes read or 0 on EOF or -1 on - * error. - */ - -static ssize_t -krb5_read (kx_context *kc, - int fd, void *buf, size_t len) -{ - krb5_kx_context *c = (krb5_kx_context *)kc->data; - krb5_context context = c->context; - size_t data_len, outer_len; - krb5_error_code ret; - unsigned char tmp[4]; - krb5_data data; - int l; - - l = krb5_net_read (context, &fd, tmp, 4); - if (l == 0) - return l; - if (l != 4) - return -1; - data_len = (tmp[0] << 24) | (tmp[1] << 16) | (tmp[2] << 8) | tmp[3]; - outer_len = krb5_get_wrapped_length (context, c->crypto, data_len); - if (outer_len > len) - return -1; - if (krb5_net_read (context, &fd, buf, outer_len) != outer_len) - return -1; - - ret = krb5_decrypt (context, c->crypto, KRB5_KU_OTHER_ENCRYPTED, - buf, outer_len, &data); - if (ret) { - krb5_warn (context, ret, "krb5_decrypt"); - return -1; - } - if (data_len > data.length) { - krb5_data_free (&data); - return -1; - } - memmove (buf, data.data, data_len); - krb5_data_free (&data); - return data_len; -} - -/* - * Write an encapsulated krb5 packet on `fd' with the data in `buf, - * len'. Return len or -1 on error. - */ - -static ssize_t -krb5_write(kx_context *kc, - int fd, const void *buf, size_t len) -{ - krb5_kx_context *c = (krb5_kx_context *)kc->data; - krb5_context context = c->context; - krb5_data data; - krb5_error_code ret; - unsigned char tmp[4]; - size_t outlen; - - ret = krb5_encrypt (context, c->crypto, KRB5_KU_OTHER_ENCRYPTED, - (void *)buf, len, &data); - if (ret){ - krb5_warn (context, ret, "krb5_write"); - return -1; - } - - outlen = data.length; - tmp[0] = (len >> 24) & 0xFF; - tmp[1] = (len >> 16) & 0xFF; - tmp[2] = (len >> 8) & 0xFF; - tmp[3] = (len >> 0) & 0xFF; - - if (krb5_net_write (context, &fd, tmp, 4) != 4 || - krb5_net_write (context, &fd, data.data, outlen) != outlen) { - krb5_data_free (&data); - return -1; - } - krb5_data_free (&data); - return len; -} - -/* - * Copy from the unix socket `from_fd' encrypting to `to_fd'. - * Return 0, -1 or len. - */ - -static int -copy_out (kx_context *kc, int from_fd, int to_fd) -{ - char buf[32768]; - ssize_t len; - - len = read (from_fd, buf, sizeof(buf)); - if (len == 0) - return 0; - if (len < 0) { - warn ("read"); - return len; - } - return krb5_write (kc, to_fd, buf, len); -} - -/* - * Copy from the socket `from_fd' decrypting to `to_fd'. - * Return 0, -1 or len. - */ - -static int -copy_in (kx_context *kc, int from_fd, int to_fd) -{ - krb5_kx_context *c = (krb5_kx_context *)kc->data; - char buf[33000]; /* XXX */ - - ssize_t len; - - len = krb5_read (kc, from_fd, buf, sizeof(buf)); - if (len == 0) - return 0; - if (len < 0) { - warn ("krb5_read"); - return len; - } - - return krb5_net_write (c->context, &to_fd, buf, len); -} - -/* - * Copy data between `fd1' and `fd2', encrypting in one direction and - * decrypting in the other. - */ - -static int -krb5_copy_encrypted (kx_context *kc, int fd1, int fd2) -{ - for (;;) { - fd_set fdset; - int ret; - - if (fd1 >= FD_SETSIZE || fd2 >= FD_SETSIZE) { - warnx ("fd too large"); - return 1; - } - - FD_ZERO(&fdset); - FD_SET(fd1, &fdset); - FD_SET(fd2, &fdset); - - ret = select (max(fd1, fd2)+1, &fdset, NULL, NULL, NULL); - if (ret < 0 && errno != EINTR) { - warn ("select"); - return 1; - } - if (FD_ISSET(fd1, &fdset)) { - ret = copy_out (kc, fd1, fd2); - if (ret <= 0) - return ret; - } - if (FD_ISSET(fd2, &fdset)) { - ret = copy_in (kc, fd2, fd1); - if (ret <= 0) - return ret; - } - } -} - -/* - * Return 0 if the user authenticated on `kc' is allowed to login as - * `user'. - */ - -static int -krb5_userok (kx_context *kc, char *user) -{ - krb5_kx_context *c = (krb5_kx_context *)kc->data; - krb5_context context = c->context; - krb5_error_code ret; - char *tmp; - - ret = krb5_unparse_name (context, c->client, &tmp); - if (ret) - krb5_err (context, 1, ret, "krb5_unparse_name"); - kc->user = tmp; - - return !krb5_kuserok (context, c->client, user); -} - -/* - * Create an instance of an krb5 context. - */ - -void -krb5_make_context (kx_context *kc) -{ - krb5_kx_context *c; - krb5_error_code ret; - - kc->authenticate = krb5_authenticate; - kc->userok = krb5_userok; - kc->read = krb5_read; - kc->write = krb5_write; - kc->copy_encrypted = krb5_copy_encrypted; - kc->destroy = krb5_destroy; - kc->user = NULL; - kc->data = malloc(sizeof(krb5_kx_context)); - - if (kc->data == NULL) - err (1, "malloc"); - memset (kc->data, 0, sizeof(krb5_kx_context)); - c = (krb5_kx_context *)kc->data; - ret = krb5_init_context (&c->context); - if (ret) - errx (1, "krb5_init_context failed: %d", ret); -} - -/* - * Receive authentication information on `sock' (first four bytes - * in `buf'). - */ - -int -recv_v5_auth (kx_context *kc, int sock, u_char *buf) -{ - u_int32_t len; - krb5_error_code ret; - krb5_kx_context *c; - krb5_context context; - krb5_principal server; - krb5_auth_context auth_context = NULL; - krb5_ticket *ticket; - - if (memcmp (buf, "\x00\x00\x00\x13", 4) != 0) - return 1; - len = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | (buf[3]); - if (net_read(sock, buf, len) != len) { - syslog (LOG_ERR, "read: %m"); - exit (1); - } - if (len != sizeof(KRB5_SENDAUTH_VERSION) - || memcmp (buf, KRB5_SENDAUTH_VERSION, len) != 0) { - syslog (LOG_ERR, "bad sendauth version: %.8s", buf); - exit (1); - } - - krb5_make_context (kc); - c = (krb5_kx_context *)kc->data; - context = c->context; - - ret = krb5_sock_to_principal (context, sock, "host", - KRB5_NT_SRV_HST, &server); - if (ret) { - syslog (LOG_ERR, "krb5_sock_to_principal: %s", - krb5_get_err_text (context, ret)); - exit (1); - } - - ret = krb5_recvauth (context, - &auth_context, - &sock, - KX_VERSION, - server, - KRB5_RECVAUTH_IGNORE_VERSION, - NULL, - &ticket); - krb5_free_principal (context, server); - if (ret) { - syslog (LOG_ERR, "krb5_sock_to_principal: %s", - krb5_get_err_text (context, ret)); - exit (1); - } - - ret = krb5_auth_con_getkey (context, auth_context, &c->keyblock); - if (ret) { - syslog (LOG_ERR, "krb5_auth_con_getkey: %s", - krb5_get_err_text (context, ret)); - exit (1); - } - - ret = krb5_crypto_init (context, c->keyblock, 0, &c->crypto); - if (ret) { - syslog (LOG_ERR, "krb5_crypto_init: %s", - krb5_get_err_text (context, ret)); - exit (1); - } - - c->client = ticket->client; - ticket->client = NULL; - krb5_free_ticket (context, ticket); - - return 0; -} - -#endif /* KRB5 */ diff --git a/crypto/heimdal/appl/kx/kx.1 b/crypto/heimdal/appl/kx/kx.1 deleted file mode 100644 index fe621d8..0000000 --- a/crypto/heimdal/appl/kx/kx.1 +++ /dev/null @@ -1,62 +0,0 @@ -.\" $Id: kx.1,v 1.7 1997/09/01 15:59:07 assar Exp $ -.\" -.Dd September 27, 1996 -.Dt KX 1 -.Os KTH-KRB -.Sh NAME -.Nm kx -.Nd -securely forward X conections -.Sh SYNOPSIS -.Ar kx -.Op Fl l Ar username -.Op Fl k -.Op Fl d -.Op Fl t -.Op Fl p Ar port -.Op Fl P -.Ar host -.Sh DESCRIPTION -The -.Nm -program forwards a X connection from a remote client to a local screen -through an authenticated and encrypted stream. Options supported by -.Nm kx : -.Bl -tag -width Ds -.It Fl l -Log in on remote the host as user -.Ar username . -.It Fl k -Do not enable keep-alives on the TCP connections. -.It Fl d -Do not fork. This is mainly useful for debugging. -.It Fl t -Listen not only on a UNIX-domain socket but on a TCP socket as well. -.It Fl p -Use the port -.Ar port . -.It Fl P -Force passive mode. -.El -.Pp -This program is used by -.Nm rxtelnet -and -.Nm rxterm -and you should not need to run it directly. -.Pp -It connects to a -.Nm kxd -on the host -.Ar host -and then will relay the traffic from the remote X clients to the local -server. When started, it prints the display and Xauthority-file to be -used on host -.Ar host -and then goes to the background, waiting for connections from the -remote -.Nm kxd. -.Sh SEE ALSO -.Xr rxtelnet 1 , -.Xr rxterm 1 , -.Xr kxd 8 diff --git a/crypto/heimdal/appl/kx/kx.c b/crypto/heimdal/appl/kx/kx.c deleted file mode 100644 index 63e1595..0000000 --- a/crypto/heimdal/appl/kx/kx.c +++ /dev/null @@ -1,765 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "kx.h" - -RCSID("$Id: kx.c,v 1.68 2001/02/20 01:44:45 assar Exp $"); - -static int nchild; -static int donep; - -/* - * Signal handler that justs waits for the children when they die. - */ - -static RETSIGTYPE -childhandler (int sig) -{ - pid_t pid; - int status; - - do { - pid = waitpid (-1, &status, WNOHANG|WUNTRACED); - if (pid > 0 && (WIFEXITED(status) || WIFSIGNALED(status))) - if (--nchild == 0 && donep) - exit (0); - } while(pid > 0); - signal (SIGCHLD, childhandler); - SIGRETURN(0); -} - -/* - * Handler for SIGUSR1. - * This signal means that we should wait until there are no children - * left and then exit. - */ - -static RETSIGTYPE -usr1handler (int sig) -{ - donep = 1; - - SIGRETURN(0); -} - -/* - * Almost the same as for SIGUSR1, except we should exit immediately - * if there are no active children. - */ - -static RETSIGTYPE -usr2handler (int sig) -{ - donep = 1; - if (nchild == 0) - exit (0); - - SIGRETURN(0); -} - -/* - * Establish authenticated connection. Return socket or -1. - */ - -static int -connect_host (kx_context *kc) -{ - struct addrinfo *ai, *a; - struct addrinfo hints; - int error; - char portstr[NI_MAXSERV]; - socklen_t addrlen; - int s; - struct sockaddr_storage thisaddr_ss; - struct sockaddr *thisaddr = (struct sockaddr *)&thisaddr_ss; - - memset (&hints, 0, sizeof(hints)); - hints.ai_socktype = SOCK_STREAM; - hints.ai_protocol = IPPROTO_TCP; - - snprintf (portstr, sizeof(portstr), "%u", ntohs(kc->port)); - - error = getaddrinfo (kc->host, portstr, &hints, &ai); - if (error) { - warnx ("%s: %s", kc->host, gai_strerror(error)); - return -1; - } - - for (a = ai; a != NULL; a = a->ai_next) { - s = socket (a->ai_family, a->ai_socktype, a->ai_protocol); - if (s < 0) - continue; - if (connect (s, a->ai_addr, a->ai_addrlen) < 0) { - warn ("connect(%s)", kc->host); - close (s); - continue; - } - break; - } - - if (a == NULL) { - freeaddrinfo (ai); - return -1; - } - - addrlen = a->ai_addrlen; - if (getsockname (s, thisaddr, &addrlen) < 0 || - addrlen != a->ai_addrlen) - err(1, "getsockname(%s)", kc->host); - memcpy (&kc->thisaddr, thisaddr, sizeof(kc->thisaddr)); - memcpy (&kc->thataddr, a->ai_addr, sizeof(kc->thataddr)); - freeaddrinfo (ai); - if ((*kc->authenticate)(kc, s)) - return -1; - return s; -} - -/* - * Get rid of the cookie that we were sent and get the correct one - * from our own cookie file instead and then just copy data in both - * directions. - */ - -static int -passive_session (int xserver, int fd, kx_context *kc) -{ - if (replace_cookie (xserver, fd, XauFileName(), 1)) - return 1; - else - return copy_encrypted (kc, xserver, fd); -} - -static int -active_session (int xserver, int fd, kx_context *kc) -{ - if (verify_and_remove_cookies (xserver, fd, 1)) - return 1; - else - return copy_encrypted (kc, xserver, fd); -} - -/* - * fork (unless debugp) and print the output that will be used by the - * script to capture the display, xauth cookie and pid. - */ - -static void -status_output (int debugp) -{ - if(debugp) - printf ("%u\t%s\t%s\n", (unsigned)getpid(), display, xauthfile); - else { - pid_t pid; - - pid = fork(); - if (pid < 0) { - err(1, "fork"); - } else if (pid > 0) { - printf ("%u\t%s\t%s\n", (unsigned)pid, display, xauthfile); - exit (0); - } else { - fclose(stdout); - } - } -} - -/* - * Obtain an authenticated connection on `kc'. Send a kx message - * saying we are `kc->user' and want to use passive mode. Wait for - * answer on that connection and fork of a child for every new - * connection we have to make. - */ - -static int -doit_passive (kx_context *kc) -{ - int otherside; - u_char msg[1024], *p; - int len; - u_int32_t tmp; - const char *host = kc->host; - - otherside = connect_host (kc); - - if (otherside < 0) - return 1; -#if defined(SO_KEEPALIVE) && defined(HAVE_SETSOCKOPT) - if (kc->keepalive_flag) { - int one = 1; - - setsockopt (otherside, SOL_SOCKET, SO_KEEPALIVE, (void *)&one, - sizeof(one)); - } -#endif - - p = msg; - *p++ = INIT; - len = strlen(kc->user); - p += KRB_PUT_INT (len, p, sizeof(msg) - 1, 4); - memcpy(p, kc->user, len); - p += len; - *p++ = PASSIVE | (kc->keepalive_flag ? KEEP_ALIVE : 0); - if (kx_write (kc, otherside, msg, p - msg) != p - msg) - err (1, "write to %s", host); - len = kx_read (kc, otherside, msg, sizeof(msg)); - if (len <= 0) - errx (1, - "error reading initial message from %s: " - "this probably means it's using an old version.", - host); - p = (u_char *)msg; - if (*p == ERROR) { - p++; - p += krb_get_int (p, &tmp, 4, 0); - errx (1, "%s: %.*s", host, (int)tmp, p); - } else if (*p != ACK) { - errx (1, "%s: strange msg %d", host, *p); - } else - p++; - p += krb_get_int (p, &tmp, 4, 0); - memcpy(display, p, tmp); - display[tmp] = '\0'; - p += tmp; - - p += krb_get_int (p, &tmp, 4, 0); - memcpy(xauthfile, p, tmp); - xauthfile[tmp] = '\0'; - p += tmp; - - status_output (kc->debug_flag); - for (;;) { - pid_t child; - - len = kx_read (kc, otherside, msg, sizeof(msg)); - if (len < 0) - err (1, "read from %s", host); - else if (len == 0) - return 0; - - p = (u_char *)msg; - if (*p == ERROR) { - p++; - p += krb_get_int (p, &tmp, 4, 0); - errx (1, "%s: %.*s", host, (int)tmp, p); - } else if(*p != NEW_CONN) { - errx (1, "%s: strange msg %d", host, *p); - } else { - p++; - p += krb_get_int (p, &tmp, 4, 0); - } - - ++nchild; - child = fork (); - if (child < 0) { - warn("fork"); - continue; - } else if (child == 0) { - struct sockaddr_in addr; - int fd; - int xserver; - - addr = kc->thataddr; - close (otherside); - - addr.sin_port = htons(tmp); - fd = socket (AF_INET, SOCK_STREAM, 0); - if (fd < 0) - err(1, "socket"); -#if defined(TCP_NODELAY) && defined(HAVE_SETSOCKOPT) - { - int one = 1; - - setsockopt (fd, IPPROTO_TCP, TCP_NODELAY, (void *)&one, - sizeof(one)); - } -#endif -#if defined(SO_KEEPALIVE) && defined(HAVE_SETSOCKOPT) - if (kc->keepalive_flag) { - int one = 1; - - setsockopt (fd, SOL_SOCKET, SO_KEEPALIVE, (void *)&one, - sizeof(one)); - } -#endif - - if (connect (fd, (struct sockaddr *)&addr, sizeof(addr)) < 0) - err(1, "connect(%s)", host); - { - int d = 0; - char *s; - - s = getenv ("DISPLAY"); - if (s != NULL) { - s = strchr (s, ':'); - if (s != NULL) - d = atoi (s + 1); - } - - xserver = connect_local_xsocket (d); - if (xserver < 0) - return 1; - } - return passive_session (xserver, fd, kc); - } else { - } - } -} - -/* - * Allocate a local pseudo-xserver and wait for connections - */ - -static int -doit_active (kx_context *kc) -{ - int otherside; - int nsockets; - struct x_socket *sockets; - u_char msg[1024], *p; - int len = strlen(kc->user); - int tmp, tmp2; - char *s; - int i; - size_t rem; - u_int32_t other_port; - int error; - const char *host = kc->host; - - otherside = connect_host (kc); - if (otherside < 0) - return 1; -#if defined(SO_KEEPALIVE) && defined(HAVE_SETSOCKOPT) - if (kc->keepalive_flag) { - int one = 1; - - setsockopt (otherside, SOL_SOCKET, SO_KEEPALIVE, (void *)&one, - sizeof(one)); - } -#endif - p = msg; - rem = sizeof(msg); - *p++ = INIT; - --rem; - len = strlen(kc->user); - tmp = KRB_PUT_INT (len, p, rem, 4); - if (tmp < 0) - return 1; - p += tmp; - rem -= tmp; - memcpy(p, kc->user, len); - p += len; - rem -= len; - *p++ = (kc->keepalive_flag ? KEEP_ALIVE : 0); - --rem; - - s = getenv("DISPLAY"); - if (s == NULL || (s = strchr(s, ':')) == NULL) - s = ":0"; - len = strlen (s); - tmp = KRB_PUT_INT (len, p, rem, 4); - if (tmp < 0) - return 1; - rem -= tmp; - p += tmp; - memcpy (p, s, len); - p += len; - rem -= len; - - s = getenv("XAUTHORITY"); - if (s == NULL) - s = ""; - len = strlen (s); - tmp = KRB_PUT_INT (len, p, rem, 4); - if (tmp < 0) - return 1; - p += len; - rem -= len; - memcpy (p, s, len); - p += len; - rem -= len; - - if (kx_write (kc, otherside, msg, p - msg) != p - msg) - err (1, "write to %s", host); - - len = kx_read (kc, otherside, msg, sizeof(msg)); - if (len < 0) - err (1, "read from %s", host); - p = (u_char *)msg; - if (*p == ERROR) { - u_int32_t u32; - - p++; - p += krb_get_int (p, &u32, 4, 0); - errx (1, "%s: %.*s", host, (int)u32, p); - } else if (*p != ACK) { - errx (1, "%s: strange msg %d", host, *p); - } else - p++; - - tmp2 = get_xsockets (&nsockets, &sockets, kc->tcp_flag); - if (tmp2 < 0) - return 1; - display_num = tmp2; - if (kc->tcp_flag) - snprintf (display, display_size, "localhost:%u", display_num); - else - snprintf (display, display_size, ":%u", display_num); - error = create_and_write_cookie (xauthfile, xauthfile_size, - cookie, cookie_len); - if (error) { - warnx ("failed creating cookie file: %s", strerror(error)); - return 1; - } - status_output (kc->debug_flag); - for (;;) { - fd_set fdset; - pid_t child; - int fd, thisfd = -1; - socklen_t zero = 0; - - FD_ZERO(&fdset); - for (i = 0; i < nsockets; ++i) { - if (sockets[i].fd >= FD_SETSIZE) - errx (1, "fd too large"); - FD_SET(sockets[i].fd, &fdset); - } - if (select(FD_SETSIZE, &fdset, NULL, NULL, NULL) <= 0) - continue; - for (i = 0; i < nsockets; ++i) - if (FD_ISSET(sockets[i].fd, &fdset)) { - thisfd = sockets[i].fd; - break; - } - fd = accept (thisfd, NULL, &zero); - if (fd < 0) { - if (errno == EINTR) - continue; - else - err(1, "accept"); - } - - p = msg; - *p++ = NEW_CONN; - if (kx_write (kc, otherside, msg, p - msg) != p - msg) - err (1, "write to %s", host); - len = kx_read (kc, otherside, msg, sizeof(msg)); - if (len < 0) - err (1, "read from %s", host); - p = (u_char *)msg; - if (*p == ERROR) { - u_int32_t val; - - p++; - p += krb_get_int (p, &val, 4, 0); - errx (1, "%s: %.*s", host, (int)val, p); - } else if (*p != NEW_CONN) { - errx (1, "%s: strange msg %d", host, *p); - } else { - p++; - p += krb_get_int (p, &other_port, 4, 0); - } - - ++nchild; - child = fork (); - if (child < 0) { - warn("fork"); - continue; - } else if (child == 0) { - int s; - struct sockaddr_in addr; - - for (i = 0; i < nsockets; ++i) - close (sockets[i].fd); - - addr = kc->thataddr; - close (otherside); - - addr.sin_port = htons(other_port); - s = socket (AF_INET, SOCK_STREAM, 0); - if (s < 0) - err(1, "socket"); -#if defined(TCP_NODELAY) && defined(HAVE_SETSOCKOPT) - { - int one = 1; - - setsockopt (s, IPPROTO_TCP, TCP_NODELAY, (void *)&one, - sizeof(one)); - } -#endif -#if defined(SO_KEEPALIVE) && defined(HAVE_SETSOCKOPT) - if (kc->keepalive_flag) { - int one = 1; - - setsockopt (s, SOL_SOCKET, SO_KEEPALIVE, (void *)&one, - sizeof(one)); - } -#endif - - if (connect (s, (struct sockaddr *)&addr, sizeof(addr)) < 0) - err(1, "connect"); - - return active_session (fd, s, kc); - } else { - close (fd); - } - } -} - -/* - * Should we interpret `disp' as this being a passive call? - */ - -static int -check_for_passive (const char *disp) -{ - char local_hostname[MaxHostNameLen]; - - gethostname (local_hostname, sizeof(local_hostname)); - - return disp != NULL && - (*disp == ':' - || strncmp(disp, "unix", 4) == 0 - || strncmp(disp, "localhost", 9) == 0 - || strncmp(disp, local_hostname, strlen(local_hostname)) == 0); -} - -/* - * Set up signal handlers and then call the functions. - */ - -static int -doit (kx_context *kc, int passive_flag) -{ - signal (SIGCHLD, childhandler); - signal (SIGUSR1, usr1handler); - signal (SIGUSR2, usr2handler); - if (passive_flag) - return doit_passive (kc); - else - return doit_active (kc); -} - -#ifdef KRB4 - -/* - * Start a v4-authenticatated kx connection. - */ - -static int -doit_v4 (const char *host, int port, const char *user, - int passive_flag, int debug_flag, int keepalive_flag, int tcp_flag) -{ - int ret; - kx_context context; - - krb4_make_context (&context); - context_set (&context, - host, user, port, debug_flag, keepalive_flag, tcp_flag); - - ret = doit (&context, passive_flag); - context_destroy (&context); - return ret; -} -#endif /* KRB4 */ - -#ifdef KRB5 - -/* - * Start a v5-authenticatated kx connection. - */ - -static int -doit_v5 (const char *host, int port, const char *user, - int passive_flag, int debug_flag, int keepalive_flag, int tcp_flag) -{ - int ret; - kx_context context; - - krb5_make_context (&context); - context_set (&context, - host, user, port, debug_flag, keepalive_flag, tcp_flag); - - ret = doit (&context, passive_flag); - context_destroy (&context); - return ret; -} -#endif /* KRB5 */ - -/* - * Variables set from the arguments - */ - -#ifdef KRB4 -static int use_v4 = -1; -#ifdef HAVE_KRB_ENABLE_DEBUG -static int krb_debug_flag = 0; -#endif /* HAVE_KRB_ENABLE_DEBUG */ -#endif /* KRB4 */ -#ifdef KRB5 -static int use_v5 = -1; -#endif -static char *port_str = NULL; -static const char *user = NULL; -static int tcp_flag = 0; -static int passive_flag = 0; -static int keepalive_flag = 1; -static int debug_flag = 0; -static int version_flag = 0; -static int help_flag = 0; - -struct getargs args[] = { -#ifdef KRB4 - { "krb4", '4', arg_flag, &use_v4, "Use Kerberos V4", - NULL }, -#ifdef HAVE_KRB_ENABLE_DEBUG - { "krb4-debug", 'D', arg_flag, &krb_debug_flag, - "enable krb4 debugging" }, -#endif /* HAVE_KRB_ENABLE_DEBUG */ -#endif /* KRB4 */ -#ifdef KRB5 - { "krb5", '5', arg_flag, &use_v5, "Use Kerberos V5", - NULL }, -#endif - { "port", 'p', arg_string, &port_str, "Use this port", - "number-of-service" }, - { "user", 'l', arg_string, &user, "Run as this user", - NULL }, - { "tcp", 't', arg_flag, &tcp_flag, - "Use a TCP connection for X11" }, - { "passive", 'P', arg_flag, &passive_flag, - "Force a passive connection" }, - { "keepalive", 'k', arg_negative_flag, &keepalive_flag, - "disable keep-alives" }, - { "debug", 'd', arg_flag, &debug_flag, - "Enable debug information" }, - { "version", 0, arg_flag, &version_flag, "Print version", - NULL }, - { "help", 0, arg_flag, &help_flag, NULL, - NULL } -}; - -static void -usage(int ret) -{ - arg_printusage (args, - sizeof(args) / sizeof(args[0]), - NULL, - "host"); - exit (ret); -} - -/* - * kx - forward an x-connection over a kerberos-encrypted channel. - */ - -int -main(int argc, char **argv) -{ - int port = 0; - int optind = 0; - int ret = 1; - char *host = NULL; - - setprogname (argv[0]); - - if (getarg (args, sizeof(args) / sizeof(args[0]), argc, argv, - &optind)) - usage (1); - - if (help_flag) - usage (0); - - if (version_flag) { - print_version (NULL); - return 0; - } - - if (optind != argc - 1) - usage (1); - - host = argv[optind]; - - if (port_str) { - struct servent *s = roken_getservbyname (port_str, "tcp"); - - if (s) - port = s->s_port; - else { - char *ptr; - - port = strtol (port_str, &ptr, 10); - if (port == 0 && ptr == port_str) - errx (1, "Bad port `%s'", port_str); - port = htons(port); - } - } - - if (user == NULL) { - user = get_default_username (); - if (user == NULL) - errx (1, "who are you?"); - } - - if (!passive_flag) - passive_flag = check_for_passive (getenv("DISPLAY")); - -#if defined(HAVE_KERNEL_ENABLE_DEBUG) - if (krb_debug_flag) - krb_enable_debug (); -#endif - -#if defined(KRB4) && defined(KRB5) - if(use_v4 == -1 && use_v5 == 1) - use_v4 = 0; - if(use_v5 == -1 && use_v4 == 1) - use_v5 = 0; -#endif - -#ifdef KRB5 - if (ret && use_v5) { - if (port == 0) - port = krb5_getportbyname(NULL, "kx", "tcp", KX_PORT); - ret = doit_v5 (host, port, user, - passive_flag, debug_flag, keepalive_flag, tcp_flag); - } -#endif -#ifdef KRB4 - if (ret && use_v4) { - if (port == 0) - port = k_getportbyname("kx", "tcp", htons(KX_PORT)); - ret = doit_v4 (host, port, user, - passive_flag, debug_flag, keepalive_flag, tcp_flag); - } -#endif - return ret; -} diff --git a/crypto/heimdal/appl/kx/kx.cat1 b/crypto/heimdal/appl/kx/kx.cat1 deleted file mode 100644 index d3f34e5..0000000 --- a/crypto/heimdal/appl/kx/kx.cat1 +++ /dev/null @@ -1,38 +0,0 @@ -KX(1) FreeBSD General Commands Manual KX(1) - -NNAAMMEE - kkxx - securely forward X conections - -SSYYNNOOPPSSIISS - _k_x [--ll _u_s_e_r_n_a_m_e] [--kk] [--dd] [--tt] [--pp _p_o_r_t] [--PP] _h_o_s_t - -DDEESSCCRRIIPPTTIIOONN - The kkxx program forwards a X connection from a remote client to a local - screen through an authenticated and encrypted stream. Options supported - by kkxx: - - --ll Log in on remote the host as user _u_s_e_r_n_a_m_e. - - --kk Do not enable keep-alives on the TCP connections. - - --dd Do not fork. This is mainly useful for debugging. - - --tt Listen not only on a UNIX-domain socket but on a TCP socket as - well. - - --pp Use the port _p_o_r_t. - - --PP Force passive mode. - - This program is used by rrxxtteellnneett and rrxxtteerrmm and you should not need to - run it directly. - - It connects to a kkxxdd on the host _h_o_s_t and then will relay the traffic - from the remote X clients to the local server. When started, it prints - the display and Xauthority-file to be used on host _h_o_s_t and then goes to - the background, waiting for connections from the remote kkxxdd.. - -SSEEEE AALLSSOO - rxtelnet(1), rxterm(1), kxd(8) - -KTH-KRB September 27, 1996 KTH-KRB diff --git a/crypto/heimdal/appl/kx/kx.h b/crypto/heimdal/appl/kx/kx.h deleted file mode 100644 index d3214cb..0000000 --- a/crypto/heimdal/appl/kx/kx.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Copyright (c) 1995 - 2001 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: kx.h,v 1.39 2001/09/17 01:59:41 assar Exp $ */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif /* HAVE_CONFIG_H */ - -#include -#include -#include -#include -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_PWD_H -#include -#endif -#ifdef HAVE_GRP_H -#include -#endif -#ifdef HAVE_SYSLOG_H -#include -#endif -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef TIME_WITH_SYS_TIME -#include -#include -#elif defined(HAVE_SYS_TIME_H) -#include -#else -#include -#endif -#ifdef HAVE_SYS_RESOURCE_H -#include -#endif -#ifdef HAVE_SYS_SELECT_H -#include -#endif -#ifdef HAVE_SYS_WAIT_H -#include -#endif -#ifdef HAVE_SYS_STAT_H -#include -#endif -#ifdef HAVE_SYS_SOCKET_H -#include -#endif -#ifdef HAVE_NETINET_IN_H -#include -#endif -#ifdef HAVE_NETINET_TCP_H -#include -#endif -#ifdef HAVE_ARPA_INET_H -#include -#endif -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_SYS_UN_H -#include -#endif -#include -#include -#include - -#ifdef HAVE_SYS_STREAM_H -#include -#endif -#ifdef HAVE_SYS_STROPTS_H -#include -#endif - -/* defined by aix's sys/stream.h and again by arpa/nameser.h */ - -#undef NOERROR - -/* as far as we know, this is only used with later versions of Slowlaris */ -#if SunOS >= 50 && defined(HAVE_SYS_STROPTS_H) && defined(HAVE_FATTACH) && defined(I_PUSH) -#define MAY_HAVE_X11_PIPES -#endif - -#ifdef SOCKS -#include -/* This doesn't belong here. */ -struct tm *localtime(const time_t *); -struct hostent *gethostbyname(const char *); -#endif - -#ifdef KRB4 -#include -#include -#endif -#ifdef KRB5 -#include -#endif - -#include -#include -#include - -struct x_socket { - char *pathname; - int fd; - enum { - LISTENP = 0x80, - TCP = LISTENP | 1, - UNIX_SOCKET = LISTENP | 2, - STREAM_PIPE = 3 - } flags; -}; - -extern char x_socket[]; -extern u_int32_t display_num; -extern char display[]; -extern int display_size; -extern char xauthfile[]; -extern int xauthfile_size; -extern u_char cookie[]; -extern size_t cookie_len; - -int get_xsockets (int *number, struct x_socket **sockets, int tcpp); -int chown_xsockets (int n, struct x_socket *sockets, uid_t uid, gid_t gid); - -int connect_local_xsocket (unsigned dnr); -int create_and_write_cookie (char *xauthfile, - size_t size, - u_char *cookie, - size_t sz); -int verify_and_remove_cookies (int fd, int sock, int cookiesp); -int replace_cookie(int xserver, int fd, char *filename, int cookiesp); - -int suspicious_address (int sock, struct sockaddr_in addr); - -#define KX_PORT 2111 - -#define KX_OLD_VERSION "KXSERV.1" -#define KX_VERSION "KXSERV.2" - -#define COOKIE_TYPE "MIT-MAGIC-COOKIE-1" - -enum { INIT = 0, ACK = 1, NEW_CONN = 2, ERROR = 3 }; - -enum kx_flags { PASSIVE = 1, KEEP_ALIVE = 2 }; - -typedef enum kx_flags kx_flags; - -struct kx_context { - int (*authenticate)(struct kx_context *kc, int s); - int (*userok)(struct kx_context *kc, char *user); - ssize_t (*read)(struct kx_context *kc, - int fd, void *buf, size_t len); - ssize_t (*write)(struct kx_context *kc, - int fd, const void *buf, size_t len); - int (*copy_encrypted)(struct kx_context *kc, - int fd1, int fd2); - void (*destroy)(struct kx_context *kc); - const char *host; - const char *user; - int port; - int debug_flag; - int keepalive_flag; - int tcp_flag; - struct sockaddr_in thisaddr, thataddr; - void *data; -}; - -typedef struct kx_context kx_context; - -void -context_set (kx_context *kc, const char *host, const char *user, int port, - int debug_flag, int keepalive_flag, int tcp_flag); - -void -context_destroy (kx_context *kc); - -int -context_authenticate (kx_context *kc, int s); - -int -context_userok (kx_context *kc, char *user); - -ssize_t -kx_read (kx_context *kc, int fd, void *buf, size_t len); - -ssize_t -kx_write (kx_context *kc, int fd, const void *buf, size_t len); - -int -copy_encrypted (kx_context *kc, int fd1, int fd2); - -#ifdef KRB4 - -void -krb4_make_context (kx_context *c); - -int -recv_v4_auth (kx_context *kc, int sock, u_char *buf); - -#endif - -#ifdef KRB5 - -void -krb5_make_context (kx_context *c); - -int -recv_v5_auth (kx_context *kc, int sock, u_char *buf); - -#endif - -void -fatal (kx_context *kc, int fd, char *format, ...) -#ifdef __GNUC__ -__attribute__ ((format (printf, 3, 4))) -#endif -; - -#ifndef KRB4 - -int -krb_get_int(void *f, u_int32_t *to, int size, int lsb); - -int -krb_put_int(u_int32_t from, void *to, size_t rem, int size); - -#endif diff --git a/crypto/heimdal/appl/kx/kxd.8 b/crypto/heimdal/appl/kx/kxd.8 deleted file mode 100644 index 04b7db5..0000000 --- a/crypto/heimdal/appl/kx/kxd.8 +++ /dev/null @@ -1,53 +0,0 @@ -.\" $Id: kxd.8,v 1.5 2001/01/11 16:16:26 assar Exp $ -.\" -.Dd September 27, 1996 -.Dt KXD 8 -.Os KTH-KRB -.Sh NAME -.Nm kxd -.Nd -securely forward X conections -.Sh SYNOPSIS -.Ar kxd -.Op Fl t -.Op Fl i -.Op Fl p Ar port -.Sh DESCRIPTION -This is the daemon for -.Nm kx . -.Pp -Options supported by -.Nm kxd : -.Bl -tag -width Ds -.It Fl t -TCP. Normally -.Nm kxd -will only listen for X connections on a UNIX socket, but some machines -(for example, Cray) have X libraries that are not able to use UNIX -sockets and thus you need to use TCP to talk to the pseudo-xserver -created by -.Nm kxd. -This option decreases the security significantly and should only be -used when it is necessary and you have considered the consequences of -doing so. -.It Fl i -Interactive. Do not expect to be started by -.Nm inetd, -but allocate and listen to the socket yourself. Handy for testing -and debugging. -.It Fl p -Port. Listen on the port -.Ar port . -Only usable with -.Fl i . -.El -.Sh EXAMPLES -Put the following in -.Pa /etc/inetd.conf : -.Bd -literal -kx stream tcp nowait root /usr/athena/libexec/kxd kxd -.Ed -.Sh SEE ALSO -.Xr kx 1 , -.Xr rxtelnet 1 , -.Xr rxterm 1 diff --git a/crypto/heimdal/appl/kx/kxd.c b/crypto/heimdal/appl/kx/kxd.c deleted file mode 100644 index 65f6165..0000000 --- a/crypto/heimdal/appl/kx/kxd.c +++ /dev/null @@ -1,754 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997, 1998, 1999 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "kx.h" - -RCSID("$Id: kxd.c,v 1.69 2001/02/20 01:44:45 assar Exp $"); - -static pid_t wait_on_pid = -1; -static int done = 0; - -/* - * Signal handler that justs waits for the children when they die. - */ - -static RETSIGTYPE -childhandler (int sig) -{ - pid_t pid; - int status; - - do { - pid = waitpid (-1, &status, WNOHANG|WUNTRACED); - if (pid > 0 && pid == wait_on_pid) - done = 1; - } while(pid > 0); - signal (SIGCHLD, childhandler); - SIGRETURN(0); -} - -/* - * Print the error message `format' and `...' on fd and die. - */ - -void -fatal (kx_context *kc, int fd, char *format, ...) -{ - u_char msg[1024]; - u_char *p; - va_list args; - int len; - - va_start(args, format); - p = msg; - *p++ = ERROR; - vsnprintf ((char *)p + 4, sizeof(msg) - 5, format, args); - syslog (LOG_ERR, "%s", (char *)p + 4); - len = strlen ((char *)p + 4); - p += KRB_PUT_INT (len, p, 4, 4); - p += len; - kx_write (kc, fd, msg, p - msg); - va_end(args); - exit (1); -} - -/* - * Remove all sockets and cookie files. - */ - -static void -cleanup(int nsockets, struct x_socket *sockets) -{ - int i; - - if(xauthfile[0]) - unlink(xauthfile); - for (i = 0; i < nsockets; ++i) { - if (sockets[i].pathname != NULL) { - unlink (sockets[i].pathname); - free (sockets[i].pathname); - } - } -} - -/* - * Prepare to receive a connection on `sock'. - */ - -static int -recv_conn (int sock, kx_context *kc, - int *dispnr, int *nsockets, struct x_socket **sockets, - int tcp_flag) -{ - u_char msg[1024], *p; - char user[256]; - socklen_t addrlen; - struct passwd *passwd; - struct sockaddr_in thisaddr, thataddr; - char remotehost[MaxHostNameLen]; - char remoteaddr[INET6_ADDRSTRLEN]; - int ret = 1; - int flags; - int len; - u_int32_t tmp32; - - addrlen = sizeof(thisaddr); - if (getsockname (sock, (struct sockaddr *)&thisaddr, &addrlen) < 0 || - addrlen != sizeof(thisaddr)) { - syslog (LOG_ERR, "getsockname: %m"); - exit (1); - } - addrlen = sizeof(thataddr); - if (getpeername (sock, (struct sockaddr *)&thataddr, &addrlen) < 0 || - addrlen != sizeof(thataddr)) { - syslog (LOG_ERR, "getpeername: %m"); - exit (1); - } - - kc->thisaddr = thisaddr; - kc->thataddr = thataddr; - - getnameinfo_verified ((struct sockaddr *)&thataddr, addrlen, - remotehost, sizeof(remotehost), - NULL, 0, 0); - - if (net_read (sock, msg, 4) != 4) { - syslog (LOG_ERR, "read: %m"); - exit (1); - } - -#ifdef KRB5 - if (ret && recv_v5_auth (kc, sock, msg) == 0) - ret = 0; -#endif -#ifdef KRB4 - if (ret && recv_v4_auth (kc, sock, msg) == 0) - ret = 0; -#endif - if (ret) { - syslog (LOG_ERR, "unrecognized auth protocol: %x %x %x %x", - msg[0], msg[1], msg[2], msg[3]); - exit (1); - } - - len = kx_read (kc, sock, msg, sizeof(msg)); - if (len < 0) { - syslog (LOG_ERR, "kx_read failed"); - exit (1); - } - p = (u_char *)msg; - if (*p != INIT) - fatal(kc, sock, "Bad message"); - p++; - p += krb_get_int (p, &tmp32, 4, 0); - len = min(sizeof(user), tmp32); - memcpy (user, p, len); - p += tmp32; - user[len] = '\0'; - - passwd = k_getpwnam (user); - if (passwd == NULL) - fatal (kc, sock, "cannot find uid for %s", user); - - if (context_userok (kc, user) != 0) - fatal (kc, sock, "%s not allowed to login as %s", - kc->user, user); - - flags = *p++; - - if (flags & PASSIVE) { - pid_t pid; - int tmp; - - tmp = get_xsockets (nsockets, sockets, tcp_flag); - if (tmp < 0) { - fatal (kc, sock, "Cannot create X socket(s): %s", - strerror(errno)); - } - *dispnr = tmp; - - if (chown_xsockets (*nsockets, *sockets, - passwd->pw_uid, passwd->pw_gid)) { - cleanup (*nsockets, *sockets); - fatal (kc, sock, "Cannot chown sockets: %s", - strerror(errno)); - } - - pid = fork(); - if (pid == -1) { - cleanup (*nsockets, *sockets); - fatal (kc, sock, "fork: %s", strerror(errno)); - } else if (pid != 0) { - wait_on_pid = pid; - while (!done) - pause (); - cleanup (*nsockets, *sockets); - exit (0); - } - } - - if (setgid (passwd->pw_gid) || - initgroups(passwd->pw_name, passwd->pw_gid) || -#ifdef HAVE_GETUDBNAM /* XXX this happens on crays */ - setjob(passwd->pw_uid, 0) == -1 || -#endif - setuid(passwd->pw_uid)) { - syslog(LOG_ERR, "setting uid/groups: %m"); - fatal (kc, sock, "cannot set uid"); - } - inet_ntop (thataddr.sin_family, - &thataddr.sin_addr, remoteaddr, sizeof(remoteaddr)); - - syslog (LOG_INFO, "from %s(%s): %s -> %s", - remotehost, remoteaddr, - kc->user, user); - umask(077); - if (!(flags & PASSIVE)) { - p += krb_get_int (p, &tmp32, 4, 0); - len = min(tmp32, display_size); - memcpy (display, p, len); - display[len] = '\0'; - p += tmp32; - p += krb_get_int (p, &tmp32, 4, 0); - len = min(tmp32, xauthfile_size); - memcpy (xauthfile, p, len); - xauthfile[len] = '\0'; - p += tmp32; - } -#if defined(SO_KEEPALIVE) && defined(HAVE_SETSOCKOPT) - if (flags & KEEP_ALIVE) { - int one = 1; - - setsockopt (sock, SOL_SOCKET, SO_KEEPALIVE, (void *)&one, - sizeof(one)); - } -#endif - return flags; -} - -/* - * - */ - -static int -passive_session (kx_context *kc, int fd, int sock, int cookiesp) -{ - if (verify_and_remove_cookies (fd, sock, cookiesp)) - return 1; - else - return copy_encrypted (kc, fd, sock); -} - -/* - * - */ - -static int -active_session (kx_context *kc, int fd, int sock, int cookiesp) -{ - fd = connect_local_xsocket(0); - - if (replace_cookie (fd, sock, xauthfile, cookiesp)) - return 1; - else - return copy_encrypted (kc, fd, sock); -} - -/* - * Handle a new connection. - */ - -static int -doit_conn (kx_context *kc, - int fd, int meta_sock, int flags, int cookiesp) -{ - int sock, sock2; - struct sockaddr_in addr; - struct sockaddr_in thisaddr; - socklen_t addrlen; - u_char msg[1024], *p; - - sock = socket (AF_INET, SOCK_STREAM, 0); - if (sock < 0) { - syslog (LOG_ERR, "socket: %m"); - return 1; - } -#if defined(TCP_NODELAY) && defined(HAVE_SETSOCKOPT) - { - int one = 1; - setsockopt (sock, IPPROTO_TCP, TCP_NODELAY, (void *)&one, sizeof(one)); - } -#endif -#if defined(SO_KEEPALIVE) && defined(HAVE_SETSOCKOPT) - if (flags & KEEP_ALIVE) { - int one = 1; - - setsockopt (sock, SOL_SOCKET, SO_KEEPALIVE, (void *)&one, - sizeof(one)); - } -#endif - memset (&addr, 0, sizeof(addr)); - addr.sin_family = AF_INET; - if (bind (sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { - syslog (LOG_ERR, "bind: %m"); - return 1; - } - addrlen = sizeof(addr); - if (getsockname (sock, (struct sockaddr *)&addr, &addrlen) < 0) { - syslog (LOG_ERR, "getsockname: %m"); - return 1; - } - if (listen (sock, SOMAXCONN) < 0) { - syslog (LOG_ERR, "listen: %m"); - return 1; - } - p = msg; - *p++ = NEW_CONN; - p += KRB_PUT_INT (ntohs(addr.sin_port), p, 4, 4); - - if (kx_write (kc, meta_sock, msg, p - msg) < 0) { - syslog (LOG_ERR, "write: %m"); - return 1; - } - - addrlen = sizeof(thisaddr); - sock2 = accept (sock, (struct sockaddr *)&thisaddr, &addrlen); - if (sock2 < 0) { - syslog (LOG_ERR, "accept: %m"); - return 1; - } - close (sock); - close (meta_sock); - - if (flags & PASSIVE) - return passive_session (kc, fd, sock2, cookiesp); - else - return active_session (kc, fd, sock2, cookiesp); -} - -/* - * Is the current user the owner of the console? - */ - -static void -check_user_console (kx_context *kc, int fd) -{ - struct stat sb; - - if (stat ("/dev/console", &sb) < 0) - fatal (kc, fd, "Cannot stat /dev/console: %s", strerror(errno)); - if (getuid() != sb.st_uid) - fatal (kc, fd, "Permission denied"); -} - -/* close down the new connection with a reasonable error message */ -static void -close_connection(int fd, const char *message) -{ - char buf[264]; /* max message */ - char *p; - int lsb = 0; - size_t mlen; - - mlen = strlen(message); - if(mlen > 255) - mlen = 255; - - /* read first part of connection packet, to get byte order */ - if(read(fd, buf, 6) != 6) { - close(fd); - return; - } - if(buf[0] == 0x6c) - lsb++; - p = buf; - *p++ = 0; /* failed */ - *p++ = mlen; /* length of message */ - p += 4; /* skip protocol version */ - p += 2; /* skip additional length */ - memcpy(p, message, mlen); /* copy message */ - p += mlen; - while((p - buf) % 4) /* pad to multiple of 4 bytes */ - *p++ = 0; - - /* now fill in length of additional data */ - if(lsb) { - buf[6] = (p - buf - 8) / 4; - buf[7] = 0; - }else{ - buf[6] = 0; - buf[7] = (p - buf - 8) / 4; - } - write(fd, buf, p - buf); - close(fd); -} - - -/* - * Handle a passive session on `sock' - */ - -static int -doit_passive (kx_context *kc, - int sock, - int flags, - int dispnr, - int nsockets, - struct x_socket *sockets, - int tcp_flag) -{ - int tmp; - int len; - size_t rem; - u_char msg[1024], *p; - int error; - - display_num = dispnr; - if (tcp_flag) - snprintf (display, display_size, "localhost:%u", display_num); - else - snprintf (display, display_size, ":%u", display_num); - error = create_and_write_cookie (xauthfile, xauthfile_size, - cookie, cookie_len); - if (error) { - cleanup(nsockets, sockets); - fatal (kc, sock, "Cookie-creation failed: %s", strerror(error)); - return 1; - } - - p = msg; - rem = sizeof(msg); - *p++ = ACK; - --rem; - - len = strlen (display); - tmp = KRB_PUT_INT (len, p, rem, 4); - if (tmp < 0 || rem < len + 4) { - syslog (LOG_ERR, "doit: buffer too small"); - cleanup(nsockets, sockets); - return 1; - } - p += tmp; - rem -= tmp; - - memcpy (p, display, len); - p += len; - rem -= len; - - len = strlen (xauthfile); - tmp = KRB_PUT_INT (len, p, rem, 4); - if (tmp < 0 || rem < len + 4) { - syslog (LOG_ERR, "doit: buffer too small"); - cleanup(nsockets, sockets); - return 1; - } - p += tmp; - rem -= tmp; - - memcpy (p, xauthfile, len); - p += len; - rem -= len; - - if(kx_write (kc, sock, msg, p - msg) < 0) { - syslog (LOG_ERR, "write: %m"); - cleanup(nsockets, sockets); - return 1; - } - for (;;) { - pid_t child; - int fd = -1; - fd_set fds; - int i; - int ret; - int cookiesp = TRUE; - - FD_ZERO(&fds); - if (sock >= FD_SETSIZE) { - syslog (LOG_ERR, "fd too large"); - cleanup(nsockets, sockets); - return 1; - } - - FD_SET(sock, &fds); - for (i = 0; i < nsockets; ++i) { - if (sockets[i].fd >= FD_SETSIZE) { - syslog (LOG_ERR, "fd too large"); - cleanup(nsockets, sockets); - return 1; - } - FD_SET(sockets[i].fd, &fds); - } - ret = select(FD_SETSIZE, &fds, NULL, NULL, NULL); - if(ret <= 0) - continue; - if(FD_ISSET(sock, &fds)){ - /* there are no processes left on the remote side - */ - cleanup(nsockets, sockets); - exit(0); - } else if(ret) { - for (i = 0; i < nsockets; ++i) { - if (FD_ISSET(sockets[i].fd, &fds)) { - if (sockets[i].flags == TCP) { - struct sockaddr_in peer; - socklen_t len = sizeof(peer); - - fd = accept (sockets[i].fd, - (struct sockaddr *)&peer, - &len); - if (fd < 0 && errno != EINTR) - syslog (LOG_ERR, "accept: %m"); - - /* XXX */ - if (fd >= 0 && suspicious_address (fd, peer)) { - close (fd); - fd = -1; - errno = EINTR; - } - } else if(sockets[i].flags == UNIX_SOCKET) { - socklen_t zero = 0; - - fd = accept (sockets[i].fd, NULL, &zero); - - if (fd < 0 && errno != EINTR) - syslog (LOG_ERR, "accept: %m"); -#ifdef MAY_HAVE_X11_PIPES - } else if(sockets[i].flags == STREAM_PIPE) { - /* - * this code tries to handle the - * send fd-over-pipe stuff for - * solaris - */ - - struct strrecvfd strrecvfd; - - ret = ioctl (sockets[i].fd, - I_RECVFD, &strrecvfd); - if (ret < 0 && errno != EINTR) { - syslog (LOG_ERR, "ioctl I_RECVFD: %m"); - } - - /* XXX */ - if (ret == 0) { - if (strrecvfd.uid != getuid()) { - close (strrecvfd.fd); - fd = -1; - errno = EINTR; - } else { - fd = strrecvfd.fd; - cookiesp = FALSE; - } - } -#endif /* MAY_HAVE_X11_PIPES */ - } else - abort (); - break; - } - } - } - if (fd < 0) { - if (errno == EINTR) - continue; - else - return 1; - } - - child = fork (); - if (child < 0) { - syslog (LOG_ERR, "fork: %m"); - if(errno != EAGAIN) - return 1; - close_connection(fd, strerror(errno)); - } else if (child == 0) { - for (i = 0; i < nsockets; ++i) - close (sockets[i].fd); - return doit_conn (kc, fd, sock, flags, cookiesp); - } else { - close (fd); - } - } -} - -/* - * Handle an active session on `sock' - */ - -static int -doit_active (kx_context *kc, - int sock, - int flags, - int tcp_flag) -{ - u_char msg[1024], *p; - - check_user_console (kc, sock); - - p = msg; - *p++ = ACK; - - if(kx_write (kc, sock, msg, p - msg) < 0) { - syslog (LOG_ERR, "write: %m"); - return 1; - } - for (;;) { - pid_t child; - int len; - - len = kx_read (kc, sock, msg, sizeof(msg)); - if (len < 0) { - syslog (LOG_ERR, "read: %m"); - return 1; - } - p = (u_char *)msg; - if (*p != NEW_CONN) { - syslog (LOG_ERR, "bad_message: %d", *p); - return 1; - } - - child = fork (); - if (child < 0) { - syslog (LOG_ERR, "fork: %m"); - if (errno != EAGAIN) - return 1; - } else if (child == 0) { - return doit_conn (kc, sock, sock, flags, 1); - } else { - } - } -} - -/* - * Receive a connection on `sock' and process it. - */ - -static int -doit(int sock, int tcp_flag) -{ - int ret; - kx_context context; - int dispnr; - int nsockets; - struct x_socket *sockets; - int flags; - - flags = recv_conn (sock, &context, &dispnr, &nsockets, &sockets, tcp_flag); - - if (flags & PASSIVE) - ret = doit_passive (&context, sock, flags, dispnr, - nsockets, sockets, tcp_flag); - else - ret = doit_active (&context, sock, flags, tcp_flag); - context_destroy (&context); - return ret; -} - -static char *port_str = NULL; -static int inetd_flag = 1; -static int tcp_flag = 0; -static int version_flag = 0; -static int help_flag = 0; - -struct getargs args[] = { - { "inetd", 'i', arg_negative_flag, &inetd_flag, - "Not started from inetd" }, - { "tcp", 't', arg_flag, &tcp_flag, "Use TCP" }, - { "port", 'p', arg_string, &port_str, "Use this port", - "port" }, - { "version", 0, arg_flag, &version_flag }, - { "help", 0, arg_flag, &help_flag } -}; - -static void -usage(int ret) -{ - arg_printusage (args, - sizeof(args) / sizeof(args[0]), - NULL, - "host"); - exit (ret); -} - -/* - * kxd - receive a forwarded X conncection - */ - -int -main (int argc, char **argv) -{ - int port; - int optind = 0; - - setprogname (argv[0]); - roken_openlog ("kxd", LOG_ODELAY | LOG_PID, LOG_DAEMON); - - if (getarg (args, sizeof(args) / sizeof(args[0]), argc, argv, - &optind)) - usage (1); - - if (help_flag) - usage (0); - - if (version_flag) { - print_version (NULL); - return 0; - } - - if(port_str) { - struct servent *s = roken_getservbyname (port_str, "tcp"); - - if (s) - port = s->s_port; - else { - char *ptr; - - port = strtol (port_str, &ptr, 10); - if (port == 0 && ptr == port_str) - errx (1, "bad port `%s'", port_str); - port = htons(port); - } - } else { -#if defined(KRB5) - port = krb5_getportbyname(NULL, "kx", "tcp", KX_PORT); -#elif defined(KRB4) - port = k_getportbyname ("kx", "tcp", htons(KX_PORT)); -#else -#error define KRB4 or KRB5 -#endif - } - - if (!inetd_flag) - mini_inetd (port); - - signal (SIGCHLD, childhandler); - return doit(STDIN_FILENO, tcp_flag); -} diff --git a/crypto/heimdal/appl/kx/kxd.cat8 b/crypto/heimdal/appl/kx/kxd.cat8 deleted file mode 100644 index 6235edb..0000000 --- a/crypto/heimdal/appl/kx/kxd.cat8 +++ /dev/null @@ -1,36 +0,0 @@ -KXD(8) FreeBSD System Manager's Manual KXD(8) - -NNAAMMEE - kkxxdd - securely forward X conections - -SSYYNNOOPPSSIISS - _k_x_d [--tt] [--ii] [--pp _p_o_r_t] - -DDEESSCCRRIIPPTTIIOONN - This is the daemon for kkxx. - - Options supported by kkxxdd: - - --tt TCP. Normally kkxxdd will only listen for X connections on a UNIX - socket, but some machines (for example, Cray) have X libraries - that are not able to use UNIX sockets and thus you need to use - TCP to talk to the pseudo-xserver created by kkxxdd.. This option - decreases the security significantly and should only be used when - it is necessary and you have considered the consequences of doing - so. - - --ii Interactive. Do not expect to be started by iinneettdd,, but allocate - and listen to the socket yourself. Handy for testing and debug- - ging. - - --pp Port. Listen on the port _p_o_r_t. Only usable with --ii. - -EEXXAAMMPPLLEESS - Put the following in _/_e_t_c_/_i_n_e_t_d_._c_o_n_f: - - kx stream tcp nowait root /usr/athena/libexec/kxd kxd - -SSEEEE AALLSSOO - kx(1), rxtelnet(1), rxterm(1) - -KTH-KRB September 27, 1996 KTH-KRB diff --git a/crypto/heimdal/appl/kx/rxtelnet.1 b/crypto/heimdal/appl/kx/rxtelnet.1 deleted file mode 100644 index 2d7aec3..0000000 --- a/crypto/heimdal/appl/kx/rxtelnet.1 +++ /dev/null @@ -1,94 +0,0 @@ -.\" $Id: rxtelnet.1,v 1.10 2002/08/20 17:07:05 joda Exp $ -.\" -.Dd September 27, 1996 -.Dt RXTELNET 1 -.Os KTH_KRB -.Sh NAME -.Nm rxtelnet -.Nd -start a telnet and forward X-connections. -.Sh SYNOPSIS -.Nm rxtelnet -.Op Fl l Ar username -.Op Fl k -.Op Fl t Ar telnet_args -.Op Fl x Ar xterm_args -.Op Fl K Ar kx_args -.Op Fl w Ar term_emulator -.Op Fl b Ar telnet_program -.Op Fl n -.Op Fl v -.Ar host -.Op Ar port -.Sh DESCRIPTION -The -.Nm -program starts a -.Nm xterm -window with a telnet to host -.Ar host . -From this window you will also be able to run X clients that will be -able to connect securily to your X server. If -.Ar port -is given, that port will be used instead of the default. -.Pp -The supported options are: -.Bl -tag -width Ds -.It Fl l -Log in on the remote host as user -.Ar username -.It Fl k -Disables keep-alives -.It Fl t -Send -.Ar telnet_args -as arguments to -.Nm telnet -.It Fl x -Send -.Ar xterm_args -as arguments to -.Nm xterm -.It Fl X -Send -.Ar kx_args -as arguments to -.Nm kx -.It Fl w -Use -.Ar term_emulator -instead of xterm. -.It Fl b -Use -.Ar telnet_program -instead of telnet. -.It Fl n -Do not start any terminal emulator. -.It Fl v -Be verbose. -.El -.Sh EXAMPLE -To login from host -.Va foo -(where your display is) -to host -.Va bar , -you might do the following. -.Bl -enum -.It -On foo: -.Nm -.Va bar -.It -You will get a new window with a -.Nm telnet -to -.Va bar . -In this window you will be able to start X clients. -.El -.Sh SEE ALSO -.Xr kx 1 , -.Xr rxterm 1 , -.Xr telnet 1 , -.Xr tenletxr 1 , -.Xr kxd 8 diff --git a/crypto/heimdal/appl/kx/rxtelnet.cat1 b/crypto/heimdal/appl/kx/rxtelnet.cat1 deleted file mode 100644 index 042850c..0000000 --- a/crypto/heimdal/appl/kx/rxtelnet.cat1 +++ /dev/null @@ -1,48 +0,0 @@ -RXTELNET(1) FreeBSD General Commands Manual RXTELNET(1) - -NNAAMMEE - rrxxtteellnneett - start a telnet and forward X-connections. - -SSYYNNOOPPSSIISS - rrxxtteellnneett [--ll _u_s_e_r_n_a_m_e] [--kk] [--tt _t_e_l_n_e_t___a_r_g_s] [--xx _x_t_e_r_m___a_r_g_s] [--KK _k_x___a_r_g_s] - [--ww _t_e_r_m___e_m_u_l_a_t_o_r] [--bb _t_e_l_n_e_t___p_r_o_g_r_a_m] [--nn] [--vv] _h_o_s_t [_p_o_r_t] - -DDEESSCCRRIIPPTTIIOONN - The rrxxtteellnneett program starts a xxtteerrmm window with a telnet to host _h_o_s_t. - From this window you will also be able to run X clients that will be able - to connect securily to your X server. If _p_o_r_t is given, that port will be - used instead of the default. - - The supported options are: - - --ll Log in on the remote host as user _u_s_e_r_n_a_m_e - - --kk Disables keep-alives - - --tt Send _t_e_l_n_e_t___a_r_g_s as arguments to tteellnneett - - --xx Send _x_t_e_r_m___a_r_g_s as arguments to xxtteerrmm - - --XX Send _k_x___a_r_g_s as arguments to kkxx - - --ww Use _t_e_r_m___e_m_u_l_a_t_o_r instead of xterm. - - --bb Use _t_e_l_n_e_t___p_r_o_g_r_a_m instead of telnet. - - --nn Do not start any terminal emulator. - - --vv Be verbose. - -EEXXAAMMPPLLEE - To login from host _f_o_o (where your display is) to host _b_a_r, you might do - the following. - - 1. On foo: rrxxtteellnneett _b_a_r - - 2. You will get a new window with a tteellnneett to _b_a_r. In this window you - will be able to start X clients. - -SSEEEE AALLSSOO - kx(1), rxterm(1), telnet(1), tenletxr(1), kxd(8) - -KTH_KRB September 27, 1996 KTH_KRB diff --git a/crypto/heimdal/appl/kx/rxtelnet.in b/crypto/heimdal/appl/kx/rxtelnet.in deleted file mode 100644 index b4497c7..0000000 --- a/crypto/heimdal/appl/kx/rxtelnet.in +++ /dev/null @@ -1,67 +0,0 @@ -#!/bin/sh -# $Id: rxtelnet.in,v 1.29 2002/03/18 17:37:34 joda Exp $ -# -usage="Usage: $0 [-l username] [-k] [-f] [-t args_to_telnet] [-x args_to_xterm] [-K args_to_kx] [-w term_emulator] [-b telnet_binary] [-n] [-v] [-h | --help] [--version] host [port]" -binary=telnet -term= -kx_args=-P -while true -do - case $1 in - -l) telnet_args="${telnet_args} -l $2 "; kx_args="${kx_args} -l $2"; title="${2}@"; shift 2;; - -t) telnet_args="${telnet_args} $2 "; shift 2;; - -x) xterm_args="${xterm_args} $2 "; shift 2;; - -f) telnet_args="${telnet_args} -f"; shift;; - -k) kx_args="${kx_args} -k"; shift;; - -K) kx_args="${kx_args} $2 "; shift 2;; - -n) term=none; shift;; - -w) term=$2; shift 2;; - -b) binary=$2; shift 2;; - --version) echo "$0: %PACKAGE% %VERSION%"; exit 0;; - -h) echo $usage; exit 0;; - --help) echo $usage; exit 0;; - -v) set -x; verb=1; shift;; - -*) echo "$0: Bad option $1"; echo $usage; exit 1;; - *) break;; - esac -done -if test $# -lt 1; then - echo $usage - exit 1 -fi -host=$1 -port=$2 -title="${title}${host}" -bindir=%bindir% -pdc_trams=`dirname $0` -PATH=$pdc_trams:$bindir:$PATH -export PATH -set -- `kx $kx_args $host` -if test $# -ne 3; then - exit 1 -fi -screen=`echo $DISPLAY | sed -ne 's/[^:]*:[0-9]*\(\.[0-9]*\)/\1/p'` -pid=$1 -disp=${2}${screen} -auth=$3 -oldifs=$IFS -IFS=: -set -- $PATH -IFS=$oldifs -if test -z "$term"; then - for j in xterm dtterm aixterm dxterm hpterm; do - for i in $*; do - test -n "$i" || i="." - if test -x $i/$j; then - term=$j; break 2 - fi - done - done -fi -test "$verb" && echo "Telnet command used is `type $binary`." -if test -n "$term" -a "$term" != "none"; then - ($term -title $title -n $title $xterm_args -e env DISPLAY=$disp XAUTHORITY=$auth $binary -D $telnet_args $host $port; kill -USR2 $pid) & -else - env DISPLAY=$disp XAUTHORITY=$auth $binary -D $telnet_args $host $port - kill -USR2 $pid -fi diff --git a/crypto/heimdal/appl/kx/rxterm.1 b/crypto/heimdal/appl/kx/rxterm.1 deleted file mode 100644 index 3e62d0d..0000000 --- a/crypto/heimdal/appl/kx/rxterm.1 +++ /dev/null @@ -1,90 +0,0 @@ -.\" $Id: rxterm.1,v 1.8 2002/08/20 17:07:06 joda Exp $ -.\" -.Dd September 27, 1996 -.Dt RXTERM 1 -.Os KTH_KRB -.Sh NAME -.Nm rxterm -.Nd -start a secure remote xterm -.Sh SYNOPSIS -.Nm rxterm -.Op Fl l Ar username -.Op Fl k -.Op Fl r Ar rsh_args -.Op Fl x Ar xterm_args -.Op Fl K Ar kx_args -.Op Fl w Ar term_emulator -.Op Fl b Ar rsh_program -.Ar host -.Op Ar port -.Sh DESCRIPTION -The -.Nm -program starts a -.Nm xterm -window on host -.Ar host . -From this window you will also be able to run X clients that will be -able to connect securily to your X server. If -.Ar port -is given, that port will be used instead of the default. -.Pp -The supported options are: -.Bl -tag -width Ds -.It Fl l -Log in on the remote host as user -.Ar username -.It Fl k -Disable keep-alives -.It Fl r -Send -.Ar rsh_args -as arguments to -.Nm rsh -.It Fl x -Send -.Ar xterm_args -as arguments to -.Nm xterm -.It Fl X -Send -.Ar kx_args -as arguments to -.Nm kx -.It Fl w -Use -.Ar term_emulator -instead of xterm. -.It Fl b -Use -.Ar rsh_program -instead of rsh. -.It Fl v -Be verbose. -.El -.Sh EXAMPLE -To login from host -.Va foo -(where your display is) -to host -.Va bar , -you might do the following. -.Bl -enum -.It -On foo: -.Nm -.Va bar -.It -You will get a new window running an -.Nm xterm -on host -.Va bar . -In this window you will be able to start X clients. -.El -.Sh SEE ALSO -.Xr kx 1 , -.Xr rsh 1 , -.Xr rxtelnet 1 , -.Xr tenletxr 1 , -.Xr kxd 8 diff --git a/crypto/heimdal/appl/kx/rxterm.cat1 b/crypto/heimdal/appl/kx/rxterm.cat1 deleted file mode 100644 index 530fba3..0000000 --- a/crypto/heimdal/appl/kx/rxterm.cat1 +++ /dev/null @@ -1,46 +0,0 @@ -RXTERM(1) FreeBSD General Commands Manual RXTERM(1) - -NNAAMMEE - rrxxtteerrmm - start a secure remote xterm - -SSYYNNOOPPSSIISS - rrxxtteerrmm [--ll _u_s_e_r_n_a_m_e] [--kk] [--rr _r_s_h___a_r_g_s] [--xx _x_t_e_r_m___a_r_g_s] [--KK _k_x___a_r_g_s] - [--ww _t_e_r_m___e_m_u_l_a_t_o_r] [--bb _r_s_h___p_r_o_g_r_a_m] _h_o_s_t [_p_o_r_t] - -DDEESSCCRRIIPPTTIIOONN - The rrxxtteerrmm program starts a xxtteerrmm window on host _h_o_s_t. From this window - you will also be able to run X clients that will be able to connect - securily to your X server. If _p_o_r_t is given, that port will be used - instead of the default. - - The supported options are: - - --ll Log in on the remote host as user _u_s_e_r_n_a_m_e - - --kk Disable keep-alives - - --rr Send _r_s_h___a_r_g_s as arguments to rrsshh - - --xx Send _x_t_e_r_m___a_r_g_s as arguments to xxtteerrmm - - --XX Send _k_x___a_r_g_s as arguments to kkxx - - --ww Use _t_e_r_m___e_m_u_l_a_t_o_r instead of xterm. - - --bb Use _r_s_h___p_r_o_g_r_a_m instead of rsh. - - --vv Be verbose. - -EEXXAAMMPPLLEE - To login from host _f_o_o (where your display is) to host _b_a_r, you might do - the following. - - 1. On foo: rrxxtteerrmm _b_a_r - - 2. You will get a new window running an xxtteerrmm on host _b_a_r. In this - window you will be able to start X clients. - -SSEEEE AALLSSOO - kx(1), rsh(1), rxtelnet(1), tenletxr(1), kxd(8) - -KTH_KRB September 27, 1996 KTH_KRB diff --git a/crypto/heimdal/appl/kx/rxterm.in b/crypto/heimdal/appl/kx/rxterm.in deleted file mode 100644 index 9291d21..0000000 --- a/crypto/heimdal/appl/kx/rxterm.in +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh -# $Id: rxterm.in,v 1.23 2002/03/18 17:37:34 joda Exp $ -# -usage="Usage: $0 [-l username] [-k] [-f] [-r rsh_args] [-x xterm_args] [-K kx_args] [-w term_emulator] [-b rsh_binary][-v] [-h | --help] [--version] host" -binary=rsh -term=xterm -while true -do - case $1 in - -l) rsh_args="${rsh_args} -l $2 "; kx_args="${kx_args} -l $2"; title="${2}@"; shift 2;; - -r) rsh_args="${rsh_args} $2 "; shift 2;; - -x) xterm_args="${xterm_args} $2 "; shift 2;; - -f) rsh_args="${rsh_args} -f"; shift;; - -k) kx_args="${kx_args} -k"; shift;; - -K) kx_args="${kx_args} $2 "; shift 2;; - -w) term=$2; shift 2;; - -b) binary=$2; shift 2;; - --version) echo "$0: %PACKAGE% %VERSION%"; exit 0;; - -h) echo $usage; exit 0;; - --help) echo $usage; exit 0;; - -v) set -x; shift;; - -*) echo "$0: Bad option $1"; echo $usage; exit 1;; - *) break;; - esac -done -if test $# -lt 1; then - echo "Usage: $0 host [arguments to $term]" - exit 1 -fi -host=$1 -title="${title}${host}" -bindir=%bindir% -pdc_trams=`dirname $0` -PATH=$pdc_trams:$bindir:$PATH -export PATH -set -- `kx $kx_args $host` -if test $# -ne 3; then - exit 1 -fi -screen=`echo $DISPLAY | sed -ne 's/[^:]*:[0-9]*\(\.[0-9]*\)/\1/p'` -pid=$1 -disp=${2}${screen} -auth=$3 -kill -USR1 $pid -$binary -n $rsh_args $host "/bin/sh -c 'DISPLAY=$disp XAUTHORITY=$auth $term -T $title -n $title $xterm_args /dev/null 2>/dev/null &'" diff --git a/crypto/heimdal/appl/kx/tenletxr.1 b/crypto/heimdal/appl/kx/tenletxr.1 deleted file mode 100644 index c9c49cd..0000000 --- a/crypto/heimdal/appl/kx/tenletxr.1 +++ /dev/null @@ -1,61 +0,0 @@ -.\" $Id: tenletxr.1,v 1.4 2002/08/20 17:07:06 joda Exp $ -.\" -.Dd March 31, 1997 -.Dt TENLETXR 1 -.Os KTH_KRB -.Sh NAME -.Nm tenletxr -.Nd -forward X-connections backwards. -.Sh SYNOPSIS -.Nm tenletxr -.Op Fl l Ar username -.Op Fl k -.Ar host -.Op Ar port -.Sh DESCRIPTION -The -.Nm -program -enables forwarding of X-connections from this machine to host -.Ar host . -If -.Ar port -is given, that port will be used instead of the default. -.Pp -The supported options are: -.Bl -tag -width Ds -.It Fl l -Log in on the remote host as user -.Ar username -.It Fl k -Disables keep-alives. -.El -.Sh EXAMPLE -To login from host -.Va foo -to host -.Va bar -(where your display is), -you might do the following. -.Bl -enum -.It -On foo: -.Nm -.Va bar -.It -You will get a new shell where you will be able to start X clients -that will show their windows on -.Va bar . -.El -.Sh BUGS -It currently checks if you have permission to run it by checking if -you own -.Pa /dev/console -on the remote host. -.Sh SEE ALSO -.Xr kx 1 , -.Xr rxtelnet 1 , -.Xr rxterm 1 , -.Xr telnet 1 , -.Xr kxd 8 diff --git a/crypto/heimdal/appl/kx/tenletxr.cat1 b/crypto/heimdal/appl/kx/tenletxr.cat1 deleted file mode 100644 index ba39b38..0000000 --- a/crypto/heimdal/appl/kx/tenletxr.cat1 +++ /dev/null @@ -1,36 +0,0 @@ -TENLETXR(1) FreeBSD General Commands Manual TENLETXR(1) - -NNAAMMEE - tteennlleettxxrr - forward X-connections backwards. - -SSYYNNOOPPSSIISS - tteennlleettxxrr [--ll _u_s_e_r_n_a_m_e] [--kk] _h_o_s_t [_p_o_r_t] - -DDEESSCCRRIIPPTTIIOONN - The tteennlleettxxrr program enables forwarding of X-connections from this - machine to host _h_o_s_t. If _p_o_r_t is given, that port will be used instead - of the default. - - The supported options are: - - --ll Log in on the remote host as user _u_s_e_r_n_a_m_e - - --kk Disables keep-alives. - -EEXXAAMMPPLLEE - To login from host _f_o_o to host _b_a_r (where your display is), you might do - the following. - - 1. On foo: tteennlleettxxrr _b_a_r - - 2. You will get a new shell where you will be able to start X clients - that will show their windows on _b_a_r. - -BBUUGGSS - It currently checks if you have permission to run it by checking if you - own _/_d_e_v_/_c_o_n_s_o_l_e on the remote host. - -SSEEEE AALLSSOO - kx(1), rxtelnet(1), rxterm(1), telnet(1), kxd(8) - -KTH_KRB March 31, 1997 KTH_KRB diff --git a/crypto/heimdal/appl/kx/tenletxr.in b/crypto/heimdal/appl/kx/tenletxr.in deleted file mode 100644 index 5c05dc9..0000000 --- a/crypto/heimdal/appl/kx/tenletxr.in +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh -# $Id: tenletxr.in,v 1.3 1999/02/04 09:29:59 assar Exp $ -# -usage="Usage: $0 [-l username] [-k] [-v] [-h | --help] [--version] host [port]" -while true -do - case $1 in - -l) kx_args="${kx_args} -l $2"; shift 2;; - -k) kx_args="${kx_args} -k"; shift;; - --version) echo "$0: %PACKAGE% %VERSION%"; exit 0;; - -h) echo $usage; exit 0;; - --help) echo $usage; exit 0;; - -v) set -x; shift;; - -*) echo "$0: Bad option $1"; echo $usage; exit 1;; - *) break;; - esac -done -if test $# -lt 1; then - echo $usage - exit 1 -fi -host=$1 -port=$2 -bindir=%bindir% -pdc_trams=`dirname $0` -PATH=$pdc_trams:$bindir:$PATH -export PATH -set -- `kx $kx_args $host` -if test $# -ne 3; then - exit 1 -fi -screen=`echo $DISPLAY | sed -ne 's/[^:]*:[0-9]*\(\.[0-9]*\)/\1/p'` -pid=$1 -disp=${2}${screen} -auth=$3 -env DISPLAY=$disp XAUTHORITY=$auth $SHELL -kill -USR2 $pid diff --git a/crypto/heimdal/appl/kx/writeauth.c b/crypto/heimdal/appl/kx/writeauth.c deleted file mode 100644 index 11dc72d..0000000 --- a/crypto/heimdal/appl/kx/writeauth.c +++ /dev/null @@ -1,73 +0,0 @@ -/* $XConsortium: AuWrite.c,v 1.6 94/04/17 20:15:45 gildea Exp $ */ - -/* - -Copyright (c) 1988 X Consortium - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - -Except as contained in this notice, the name of the X Consortium shall not be -used in advertising or otherwise to promote the sale, use or other dealings -in this Software without prior written authorization from the X Consortium. - -*/ - -#ifdef HAVE_CONFIG_H -#include -RCSID("$Id: writeauth.c,v 1.4 1999/05/12 17:59:44 assar Exp $"); -#endif - -#include - -static int -write_short (unsigned short s, FILE *file) -{ - unsigned char file_short[2]; - - file_short[0] = (s & (unsigned)0xff00) >> 8; - file_short[1] = s & 0xff; - if (fwrite (file_short, sizeof (file_short), 1, file) != 1) - return 0; - return 1; -} - -static int -write_counted_string (unsigned short count, char *string, FILE *file) -{ - if (write_short (count, file) == 0) - return 0; - if (fwrite (string, (int) sizeof (char), (int) count, file) != count) - return 0; - return 1; -} - -int -XauWriteAuth (FILE *auth_file, Xauth *auth) -{ - if (write_short (auth->family, auth_file) == 0) - return 0; - if (write_counted_string (auth->address_length, auth->address, auth_file) == 0) - return 0; - if (write_counted_string (auth->number_length, auth->number, auth_file) == 0) - return 0; - if (write_counted_string (auth->name_length, auth->name, auth_file) == 0) - return 0; - if (write_counted_string (auth->data_length, auth->data, auth_file) == 0) - return 0; - return 1; -} diff --git a/crypto/heimdal/appl/otp/ChangeLog b/crypto/heimdal/appl/otp/ChangeLog deleted file mode 100644 index cffff9e..0000000 --- a/crypto/heimdal/appl/otp/ChangeLog +++ /dev/null @@ -1,40 +0,0 @@ -2000-11-29 Johan Danielsson - - * otpprint.1: sort parameters and close a list - - * otp.1: sort parameters and close a list - -1999-09-14 Assar Westerlund - - * otp.c (verify_user_otp): check return value from - des_read_pw_string - -Thu Apr 1 16:51:07 1999 Johan Danielsson - - * otpprint.c: use getarg - - * otp.c: use getarg - -Thu Mar 18 12:08:58 1999 Johan Danielsson - - * Makefile.am: include Makefile.am.common - -Thu Mar 4 19:45:40 1999 Johan Danielsson - - * Makefile.am: DESTDIR - -Sat Feb 27 19:44:25 1999 Johan Danielsson - - * Makefile.am: add - -Sun Nov 22 10:32:50 1998 Assar Westerlund - - * otpprint.c: more braces - - * Makefile.in (WFLAGS): set - -Sun Dec 21 09:31:30 1997 Assar Westerlund - - * otp.c (renew): don't set the OTP if the reading of the string - fails. - diff --git a/crypto/heimdal/appl/otp/Makefile b/crypto/heimdal/appl/otp/Makefile deleted file mode 100644 index 1a2bad5..0000000 --- a/crypto/heimdal/appl/otp/Makefile +++ /dev/null @@ -1,649 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# appl/otp/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.11 2001/08/28 08:31:21 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_des) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -bin_PROGRAMS = otp otpprint -bin_SUIDS = otp -otp_SOURCES = otp.c otp_locl.h -otpprint_SOURCES = otpprint.c otp_locl.h - -man_MANS = otp.1 otpprint.1 - -LDADD = \ - $(top_builddir)/lib/otp/libotp.la - -subdir = appl/otp -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -bin_PROGRAMS = otp$(EXEEXT) otpprint$(EXEEXT) -PROGRAMS = $(bin_PROGRAMS) - -am_otp_OBJECTS = otp.$(OBJEXT) -otp_OBJECTS = $(am_otp_OBJECTS) -otp_LDADD = $(LDADD) -otp_DEPENDENCIES = $(top_builddir)/lib/otp/libotp.la -otp_LDFLAGS = -am_otpprint_OBJECTS = otpprint.$(OBJEXT) -otpprint_OBJECTS = $(am_otpprint_OBJECTS) -otpprint_LDADD = $(LDADD) -otpprint_DEPENDENCIES = $(top_builddir)/lib/otp/libotp.la -otpprint_LDFLAGS = - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = $(otp_SOURCES) $(otpprint_SOURCES) -MANS = $(man_MANS) -DIST_COMMON = ChangeLog Makefile.am Makefile.in -SOURCES = $(otp_SOURCES) $(otpprint_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/otp/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -otp$(EXEEXT): $(otp_OBJECTS) $(otp_DEPENDENCIES) - @rm -f otp$(EXEEXT) - $(LINK) $(otp_LDFLAGS) $(otp_OBJECTS) $(otp_LDADD) $(LIBS) -otpprint$(EXEEXT): $(otpprint_OBJECTS) $(otpprint_DEPENDENCIES) - @rm -f otpprint$(EXEEXT) - $(LINK) $(otpprint_LDFLAGS) $(otpprint_OBJECTS) $(otpprint_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ - rm -f $(DESTDIR)$(man1dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-binPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man1 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man - -uninstall-man: uninstall-man1 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-binPROGRAMS clean-generic clean-libtool distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-binPROGRAMS install-data install-data-am \ - install-data-local install-exec install-exec-am install-info \ - install-info-am install-man install-man1 install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-info-am \ - uninstall-man uninstall-man1 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/otp/Makefile.am b/crypto/heimdal/appl/otp/Makefile.am deleted file mode 100644 index 16e1c0c..0000000 --- a/crypto/heimdal/appl/otp/Makefile.am +++ /dev/null @@ -1,15 +0,0 @@ -# $Id: Makefile.am,v 1.11 2001/08/28 08:31:21 assar Exp $ - -include $(top_srcdir)/Makefile.am.common - -INCLUDES += $(INCLUDE_des) - -bin_PROGRAMS = otp otpprint -bin_SUIDS = otp -otp_SOURCES = otp.c otp_locl.h -otpprint_SOURCES = otpprint.c otp_locl.h - -man_MANS = otp.1 otpprint.1 - -LDADD = \ - $(top_builddir)/lib/otp/libotp.la diff --git a/crypto/heimdal/appl/otp/Makefile.in b/crypto/heimdal/appl/otp/Makefile.in deleted file mode 100644 index 49e9e8d..0000000 --- a/crypto/heimdal/appl/otp/Makefile.in +++ /dev/null @@ -1,649 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.11 2001/08/28 08:31:21 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ -WFLAGS = @WFLAGS@ -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_des) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -bin_PROGRAMS = otp otpprint -bin_SUIDS = otp -otp_SOURCES = otp.c otp_locl.h -otpprint_SOURCES = otpprint.c otp_locl.h - -man_MANS = otp.1 otpprint.1 - -LDADD = \ - $(top_builddir)/lib/otp/libotp.la - -subdir = appl/otp -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -bin_PROGRAMS = otp$(EXEEXT) otpprint$(EXEEXT) -PROGRAMS = $(bin_PROGRAMS) - -am_otp_OBJECTS = otp.$(OBJEXT) -otp_OBJECTS = $(am_otp_OBJECTS) -otp_LDADD = $(LDADD) -otp_DEPENDENCIES = $(top_builddir)/lib/otp/libotp.la -otp_LDFLAGS = -am_otpprint_OBJECTS = otpprint.$(OBJEXT) -otpprint_OBJECTS = $(am_otpprint_OBJECTS) -otpprint_LDADD = $(LDADD) -otpprint_DEPENDENCIES = $(top_builddir)/lib/otp/libotp.la -otpprint_LDFLAGS = - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = $(otp_SOURCES) $(otpprint_SOURCES) -MANS = $(man_MANS) -DIST_COMMON = ChangeLog Makefile.am Makefile.in -SOURCES = $(otp_SOURCES) $(otpprint_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/otp/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -otp$(EXEEXT): $(otp_OBJECTS) $(otp_DEPENDENCIES) - @rm -f otp$(EXEEXT) - $(LINK) $(otp_LDFLAGS) $(otp_OBJECTS) $(otp_LDADD) $(LIBS) -otpprint$(EXEEXT): $(otpprint_OBJECTS) $(otpprint_DEPENDENCIES) - @rm -f otpprint$(EXEEXT) - $(LINK) $(otpprint_LDFLAGS) $(otpprint_OBJECTS) $(otpprint_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ - rm -f $(DESTDIR)$(man1dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-binPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man1 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man - -uninstall-man: uninstall-man1 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-binPROGRAMS clean-generic clean-libtool distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-binPROGRAMS install-data install-data-am \ - install-data-local install-exec install-exec-am install-info \ - install-info-am install-man install-man1 install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-info-am \ - uninstall-man uninstall-man1 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/otp/otp.1 b/crypto/heimdal/appl/otp/otp.1 deleted file mode 100644 index 473a4b0..0000000 --- a/crypto/heimdal/appl/otp/otp.1 +++ /dev/null @@ -1,60 +0,0 @@ -.\" $Id: otp.1,v 1.2 2000/11/29 18:18:22 joda Exp $ -.\" -.Dd November 17, 1996 -.Dt OTP 1 -.Os KTH-KRB -.Sh NAME -.Nm otp -.Nd -manages one-time passwords -.Sh SYNOPSIS -.Nm otp -.Op Fl dhlor -.Op Fl f Ar algorithm -.Op Fl u Ar user -.Ar sequence-number -.Ar seed -.Sh DESCRIPTION -The -.Nm -program initializes and updates your current series of one-time -passwords (OTPs). -.Pp -Use this to set a new series of one-time passwords. Only perform this -on the console or over an encrypted link as you will have to supply -your pass-phrase. The other two parameters are -.Ar sequence-number -and -.Ar seed . -.Pp -Options are: -.Bl -tag -width Ds -.It Fl d -To delete a one-time password. -.It Fl f -Choose a different -.Ar algorithm -from the default md5. Pick any of: md4, md5, and sha. -.It Fl h -For getting a help message. -.It Fl l -List the current table of one-time passwords. -.It Fl o -To open (unlock) the otp-entry for a user. -.It Fl r -To renew a one-time password series. This operation can be performed -over an potentially eavesdropped link because you do not supply the -pass-phrase. First you need to supply the current one-time password -and then the new one corresponding to the supplied -.Ar sequence-number -and -.Ar seed . -.It Fl u -To choose a different -.Ar user -to set one-time passwords for. This only works when running -.Nm -as root. -.El -.Sh SEE ALSO -.Xr otpprint 1 diff --git a/crypto/heimdal/appl/otp/otp.c b/crypto/heimdal/appl/otp/otp.c deleted file mode 100644 index 66de4e0..0000000 --- a/crypto/heimdal/appl/otp/otp.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (c) 1995-1997, 1999 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "otp_locl.h" -#include - -RCSID("$Id: otp.c,v 1.33 2001/02/20 01:44:46 assar Exp $"); - -static int listp; -static int deletep; -static int openp; -static int renewp; -static char* alg_string; -static char *user; -static int version_flag; -static int help_flag; - -struct getargs args[] = { - { "list", 'l', arg_flag, &listp, "list OTP status" }, - { "delete", 'd', arg_flag, &deletep, "delete OTP" }, - { "open", 'o', arg_flag, &openp, "open a locked OTP" }, - { "renew", 'r', arg_flag, &renewp, "securely renew OTP" }, - { "hash", 'f', arg_string, &alg_string, - "hash algorithm (md4, md5, or sha)", "algorithm"}, - { "user", 'u', arg_string, &user, - "user other than current user (root only)", "user" }, - { "version", 0, arg_flag, &version_flag }, - { "help", 'h', arg_flag, &help_flag } -}; - -int num_args = sizeof(args) / sizeof(args[0]); - -static void -usage(int code) -{ - arg_printusage(args, num_args, NULL, "[num seed]"); - exit(code); -} - -/* - * Renew the OTP for a user. - * The pass-phrase is not required (RFC 1938/8.0) - */ - -static int -renew (int argc, char **argv, OtpAlgorithm *alg, char *user) -{ - OtpContext newctx, *ctx; - char prompt[128]; - char pw[64]; - void *dbm; - int ret; - - newctx.alg = alg; - newctx.user = user; - newctx.n = atoi (argv[0]); - strlcpy (newctx.seed, argv[1], sizeof(newctx.seed)); - strlwr(newctx.seed); - snprintf (prompt, sizeof(prompt), - "[ otp-%s %u %s ]", - newctx.alg->name, - newctx.n, - newctx.seed); - if (des_read_pw_string (pw, sizeof(pw), prompt, 0) == 0 && - otp_parse (newctx.key, pw, alg) == 0) { - ctx = &newctx; - ret = 0; - } else - return 1; - - dbm = otp_db_open (); - if (dbm == NULL) { - warnx ("otp_db_open failed"); - return 1; - } - otp_put (dbm, ctx); - otp_db_close (dbm); - return ret; -} - -/* - * Return 0 if the user could enter the next OTP. - * I would rather have returned !=0 but it's shell-like here around. - */ - -static int -verify_user_otp(char *username) -{ - OtpContext ctx; - char passwd[OTP_MAX_PASSPHRASE + 1]; - char prompt[128], ss[256]; - - if (otp_challenge (&ctx, username, ss, sizeof(ss)) != 0) { - warnx("no otp challenge found for %s", username); - return 1; - } - - snprintf (prompt, sizeof(prompt), "%s's %s Password: ", username, ss); - if(des_read_pw_string(passwd, sizeof(passwd)-1, prompt, 0)) - return 1; - return otp_verify_user (&ctx, passwd); -} - -/* - * Set the OTP for a user - */ - -static int -set (int argc, char **argv, OtpAlgorithm *alg, char *user) -{ - void *db; - OtpContext ctx; - char pw[OTP_MAX_PASSPHRASE + 1]; - int ret; - int i; - - ctx.alg = alg; - ctx.user = strdup (user); - if (ctx.user == NULL) - err (1, "out of memory"); - - ctx.n = atoi (argv[0]); - strlcpy (ctx.seed, argv[1], sizeof(ctx.seed)); - strlwr(ctx.seed); - do { - if (des_read_pw_string (pw, sizeof(pw), "Pass-phrase: ", 1)) - return 1; - if (strlen (pw) < OTP_MIN_PASSPHRASE) - printf ("Too short pass-phrase. Use at least %d characters\n", - OTP_MIN_PASSPHRASE); - } while(strlen(pw) < OTP_MIN_PASSPHRASE); - ctx.alg->init (ctx.key, pw, ctx.seed); - for (i = 0; i < ctx.n; ++i) - ctx.alg->next (ctx.key); - db = otp_db_open (); - if(db == NULL) { - free (ctx.user); - err (1, "otp_db_open failed"); - } - ret = otp_put (db, &ctx); - otp_db_close (db); - free (ctx.user); - return ret; -} - -/* - * Delete otp of user from the database - */ - -static int -delete_otp (int argc, char **argv, char *user) -{ - void *db; - OtpContext ctx; - int ret; - - db = otp_db_open (); - if(db == NULL) - errx (1, "otp_db_open failed"); - - ctx.user = user; - ret = otp_delete(db, &ctx); - otp_db_close (db); - return ret; -} - -/* - * Tell whether the user has an otp - */ - -static int -has_an_otp(char *user) -{ - void *db; - OtpContext ctx; - int ret; - - db = otp_db_open (); - if(db == NULL) { - warnx ("otp_db_open failed"); - return 0; /* if no db no otp! */ - } - - ctx.user = user; - ret = otp_simple_get(db, &ctx); - - otp_db_close (db); - return !ret; -} - -/* - * Get and print out the otp entry for some user - */ - -static void -print_otp_entry_for_name (void *db, char *user) -{ - OtpContext ctx; - - ctx.user = user; - if (!otp_simple_get(db, &ctx)) { - fprintf(stdout, - "%s\totp-%s %d %s", - ctx.user, ctx.alg->name, ctx.n, ctx.seed); - if (ctx.lock_time) - fprintf(stdout, - "\tlocked since %s", - ctime(&ctx.lock_time)); - else - fprintf(stdout, "\n"); - } -} - -static int -open_otp (int argc, char **argv, char *user) -{ - void *db; - OtpContext ctx; - int ret; - - db = otp_db_open (); - if (db == NULL) - errx (1, "otp_db_open failed"); - - ctx.user = user; - ret = otp_simple_get (db, &ctx); - if (ret == 0) - ret = otp_put (db, &ctx); - otp_db_close (db); - return ret; -} - -/* - * Print otp entries for one or all users - */ - -static int -list_otps (int argc, char **argv, char *user) -{ - void *db; - struct passwd *pw; - - db = otp_db_open (); - if(db == NULL) - errx (1, "otp_db_open failed"); - - if (user) - print_otp_entry_for_name(db, user); - else - /* scans all users... so as to get a deterministic order */ - while ((pw = getpwent())) - print_otp_entry_for_name(db, pw->pw_name); - - otp_db_close (db); - return 0; -} - -int -main (int argc, char **argv) -{ - int defaultp = 0; - int uid = getuid(); - OtpAlgorithm *alg = otp_find_alg (OTP_ALG_DEFAULT); - int optind = 0; - - setprogname (argv[0]); - if(getarg(args, num_args, argc, argv, &optind)) - usage(1); - if(help_flag) - usage(0); - if(version_flag) { - print_version(NULL); - exit(0); - } - - if(deletep && uid != 0) - errx (1, "Only root can delete OTPs"); - if(alg_string) { - alg = otp_find_alg (alg_string); - if (alg == NULL) - errx (1, "Unknown algorithm: %s", alg_string); - } - if (user && uid != 0) - errx (1, "Only root can use `-u'"); - argc -= optind; - argv += optind; - - if (!(listp || deletep || renewp || openp)) - defaultp = 1; - - if ( listp + deletep + renewp + defaultp + openp != 1) - usage(1); /* one of -d or -l or -r or none */ - - if(deletep || openp || listp) { - if(argc != 0) - errx(1, "delete, open, and list requires no arguments\n"); - } else { - if(argc != 2) - errx(1, "setup, and renew requires `num', and `seed'"); - } - if (listp) - return list_otps (argc, argv, user); - - if (user == NULL) { - struct passwd *pwd; - - pwd = k_getpwuid(uid); - if (pwd == NULL) - err (1, "You don't exist"); - user = pwd->pw_name; - } - - /* - * users other that root must provide the next OTP to update the sequence. - * it avoids someone to use a pending session to change an OTP sequence. - * see RFC 1938/8.0. - */ - if (uid != 0 && (defaultp || renewp)) { - if (!has_an_otp(user)) { - errx (1, "Only root can set an initial OTP"); - } else { /* Check the next OTP (RFC 1938/8.0: SHOULD) */ - if (verify_user_otp(user) != 0) { - errx (1, "User authentification failed"); - } - } - } - - if (deletep) - return delete_otp (argc, argv, user); - else if (renewp) - return renew (argc, argv, alg, user); - else if (openp) - return open_otp (argc, argv, user); - else - return set (argc, argv, alg, user); -} diff --git a/crypto/heimdal/appl/otp/otp.cat1 b/crypto/heimdal/appl/otp/otp.cat1 deleted file mode 100644 index 853b440..0000000 --- a/crypto/heimdal/appl/otp/otp.cat1 +++ /dev/null @@ -1,42 +0,0 @@ -OTP(1) FreeBSD General Commands Manual OTP(1) - -NNAAMMEE - oottpp - manages one-time passwords - -SSYYNNOOPPSSIISS - oottpp [--ddhhlloorr] [--ff _a_l_g_o_r_i_t_h_m] [--uu _u_s_e_r] _s_e_q_u_e_n_c_e_-_n_u_m_b_e_r _s_e_e_d - -DDEESSCCRRIIPPTTIIOONN - The oottpp program initializes and updates your current series of one-time - passwords (OTPs). - - Use this to set a new series of one-time passwords. Only perform this on - the console or over an encrypted link as you will have to supply your - pass-phrase. The other two parameters are _s_e_q_u_e_n_c_e_-_n_u_m_b_e_r and _s_e_e_d. - - Options are: - - --dd To delete a one-time password. - - --ff Choose a different _a_l_g_o_r_i_t_h_m from the default md5. Pick any of: - md4, md5, and sha. - - --hh For getting a help message. - - --ll List the current table of one-time passwords. - - --oo To open (unlock) the otp-entry for a user. - - --rr To renew a one-time password series. This operation can be per- - formed over an potentially eavesdropped link because you do not - supply the pass-phrase. First you need to supply the current - one-time password and then the new one corresponding to the sup- - plied _s_e_q_u_e_n_c_e_-_n_u_m_b_e_r and _s_e_e_d. - - --uu To choose a different _u_s_e_r to set one-time passwords for. This - only works when running oottpp as root. - -SSEEEE AALLSSOO - otpprint(1) - -KTH-KRB November 17, 1996 KTH-KRB diff --git a/crypto/heimdal/appl/otp/otp_locl.h b/crypto/heimdal/appl/otp/otp_locl.h deleted file mode 100644 index 342f4fd..0000000 --- a/crypto/heimdal/appl/otp/otp_locl.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (c) 1995 - 2001 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: otp_locl.h,v 1.9 2001/08/22 20:30:21 assar Exp $ */ - -#ifdef HAVE_CONFIG_H -#include -#endif - -#include -#include -#include -#include -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_PWD_H -#include -#endif -#include -#include -#ifdef HAVE_OPENSSL -#include -#else -#include -#endif -#include diff --git a/crypto/heimdal/appl/otp/otpprint.1 b/crypto/heimdal/appl/otp/otpprint.1 deleted file mode 100644 index 7f7d5be..0000000 --- a/crypto/heimdal/appl/otp/otpprint.1 +++ /dev/null @@ -1,52 +0,0 @@ -.\" $Id: otpprint.1,v 1.4 2001/06/08 20:44:46 assar Exp $ -.\" -.Dd November 17, 1996 -.Dt OTP 1 -.Os KTH-KRB -.Sh NAME -.Nm otpprint -.Nd -print lists of one-time passwords -.Sh SYNOPSIS -.Nm otp -.Op Fl n Ar count -.Op Fl e -.Op Fl h -.Op Fl f Ar algorithm -.Ar sequence-number -.Ar seed -.Sh DESCRIPTION -The -.Nm -program prints lists of OTPs. -.Pp -Use this to print out a series of one-time passwords. You will have -to supply the -.Ar sequence number -and the -.Ar seed -as arguments and then the program will prompt you for your pass-phrase. -.Pp -There are several different print formats. The default is to print -each password with six short english words. -.Pp -Options are: -.Bl -tag -width Ds -.It Fl e -Print the passwords in ``extended'' format. In this format a prefix -that says ``hex:'' or ``word:'' is included. -.It Fl f -To choose a different -.Ar algorithm -from the default md5. Pick any of: md4, md5, and sha. -.It Fl h -Print the passwords in hex. -.It Fl n -Print -.Ar count -one-time passwords, starting at -.Ar sequence-number -and going backwards. The default is 10. -.El -.Sh SEE ALSO -.Xr otp 1 diff --git a/crypto/heimdal/appl/otp/otpprint.c b/crypto/heimdal/appl/otp/otpprint.c deleted file mode 100644 index b1d0a84..0000000 --- a/crypto/heimdal/appl/otp/otpprint.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (c) 1995-1999 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include "otp_locl.h" -#include - -RCSID("$Id: otpprint.c,v 1.14 2001/02/20 01:44:46 assar Exp $"); - -static int extendedp; -static int count = 10; -static int hexp; -static char* alg_string; -static int version_flag; -static int help_flag; - -struct getargs args[] = { - { "extended", 'e', arg_flag, &extendedp, "print keys in extended format" }, - { "count", 'n', arg_integer, &count, "number of keys to print" }, - { "hexadecimal", 'h', arg_flag, &hexp, "output in hexadecimal" }, - { "hash", 'f', arg_string, &alg_string, - "hash algorithm (md4, md5, or sha)", "algorithm"}, - { "version", 0, arg_flag, &version_flag }, - { "help", 0, arg_flag, &help_flag } -}; - -int num_args = sizeof(args) / sizeof(args[0]); - -static void -usage(int code) -{ - arg_printusage(args, num_args, NULL, "num seed"); - exit(code); -} - -static int -print (int argc, - char **argv, - int count, - OtpAlgorithm *alg, - void (*print_fn)(OtpKey, char *, size_t)) -{ - char pw[64]; - OtpKey key; - int n; - int i; - char *seed; - - if (argc != 2) - usage (1); - n = atoi(argv[0]); - seed = argv[1]; - if (des_read_pw_string (pw, sizeof(pw), "Pass-phrase: ", 0)) - return 1; - alg->init (key, pw, seed); - for (i = 0; i < n; ++i) { - char s[64]; - - alg->next (key); - if (i >= n - count) { - (*print_fn)(key, s, sizeof(s)); - printf ("%d: %s\n", i + 1, s); - } - } - return 0; -} - -int -main (int argc, char **argv) -{ - int optind = 0; - void (*fn)(OtpKey, char *, size_t); - OtpAlgorithm *alg = otp_find_alg (OTP_ALG_DEFAULT); - - setprogname (argv[0]); - if(getarg(args, num_args, argc, argv, &optind)) - usage(1); - if(help_flag) - usage(0); - if(version_flag) { - print_version(NULL); - exit(0); - } - - if(alg_string) { - alg = otp_find_alg (alg_string); - if (alg == NULL) - errx(1, "Unknown algorithm: %s", alg_string); - } - argc -= optind; - argv += optind; - - if (hexp) { - if (extendedp) - fn = otp_print_hex_extended; - else - fn = otp_print_hex; - } else { - if (extendedp) - fn = otp_print_stddict_extended; - else - fn = otp_print_stddict; - } - - return print (argc, argv, count, alg, fn); -} diff --git a/crypto/heimdal/appl/otp/otpprint.cat1 b/crypto/heimdal/appl/otp/otpprint.cat1 deleted file mode 100644 index afd8c90..0000000 --- a/crypto/heimdal/appl/otp/otpprint.cat1 +++ /dev/null @@ -1,35 +0,0 @@ -OTP(1) FreeBSD General Commands Manual OTP(1) - -NNAAMMEE - oottpppprriinntt - print lists of one-time passwords - -SSYYNNOOPPSSIISS - oottpp [--nn _c_o_u_n_t] [--ee] [--hh] [--ff _a_l_g_o_r_i_t_h_m] _s_e_q_u_e_n_c_e_-_n_u_m_b_e_r _s_e_e_d - -DDEESSCCRRIIPPTTIIOONN - The oottpppprriinntt program prints lists of OTPs. - - Use this to print out a series of one-time passwords. You will have to - supply the _s_e_q_u_e_n_c_e _n_u_m_b_e_r and the _s_e_e_d as arguments and then the program - will prompt you for your pass-phrase. - - There are several different print formats. The default is to print each - password with six short english words. - - Options are: - - --ee Print the passwords in ``extended'' format. In this format a - prefix that says ``hex:'' or ``word:'' is included. - - --ff To choose a different _a_l_g_o_r_i_t_h_m from the default md5. Pick any - of: md4, md5, and sha. - - --hh Print the passwords in hex. - - --nn Print _c_o_u_n_t one-time passwords, starting at _s_e_q_u_e_n_c_e_-_n_u_m_b_e_r and - going backwards. The default is 10. - -SSEEEE AALLSSOO - otp(1) - -KTH-KRB November 17, 1996 KTH-KRB diff --git a/crypto/heimdal/appl/popper/ChangeLog b/crypto/heimdal/appl/popper/ChangeLog deleted file mode 100644 index 8e24c1d..0000000 --- a/crypto/heimdal/appl/popper/ChangeLog +++ /dev/null @@ -1,197 +0,0 @@ -2002-07-04 Johan Danielsson - - * pop_dropcopy.c: use RESP-CODES - - * pop_get_command.c: implement CAPA - - * popper.c: don't print our version in the greeting string - - * popper.h: add a flags parameter to the pop context - -2002-05-02 Johan Danielsson - - * pop_debug.c: revert some accidentally commited code in previous - -2002-02-07 Johan Danielsson - - * pop_debug.c: only claim krb5 support if really present - -2001-09-10 Johan Danielsson - - * maildir.c: replace MAXDROPLEN with MAXPATHLEN - - * popper.h: replace MAXDROPLEN with MAXPATHLEN - -2001-08-13 Johan Danielsson - - * popper.8: rewritten man page - -2000-12-31 Assar Westerlund - - * pop_init.c (pop_init): handle krb5_init_context failure - consistently - * pop_debug.c (doit_v5): handle krb5_init_context failure - consistently - -2000-06-10 Assar Westerlund - - * pop_init.c (krb4_authenticate): do not exit on failure, just - return - (krb5_authenticate): log errors from krb5_recvauth - -2000-04-12 Assar Westerlund - - * *.c: replace all erroneous calls to pop_log with POP_FAILURE - with POP_PRIORITY. reported by Janne Johansson ' - -2000-01-27 Assar Westerlund - - * pop_debug.c (main): figure out port number - -1999-12-20 Assar Westerlund - - * pop_init.c (pop_init): use getnameinfo_verified - - * pop_debug.c (get_socket): use getaddrinfo - -1999-12-03 Johan Danielsson - - * pop_init.c: optionally trace connected addresses to a file - -1999-11-02 Assar Westerlund - - * pop_debug.c (main): redo the v4/v5 selection for consistency. - -4 -> try only v4 -5 -> try only v5 none, -45 -> try v5, v4 - -1999-10-16 Johan Danielsson - - * pop_init.c (krb5_authenticate): don't use the principal - associated with the socket for authentication, instead let - krb5_rd_req pick the correct one from the ticket; just check that - it actually was a pop-ticket - -1999-08-12 Johan Danielsson - - * pop_init.c (pop_init): don't freehostent if ch == NULL - - * pop_dele.c: implement XDELE to delete a range of messages - -1999-08-05 Assar Westerlund - - * pop_init.c: v6-ify - - * pop_debug.c: v6-ify - -1999-05-10 Assar Westerlund - - * pop_debug.c (doit_v5): call krb5_sendauth with ccache == NULL - -1999-04-11 Assar Westerlund - - * pop_debug.c (main): use print_version - -Thu Apr 8 15:07:11 1999 Johan Danielsson - - * pop_pass.c: remove definition of KRB_VERIFY_USER (moved to - config.h) - -Thu Mar 18 12:55:42 1999 Johan Danielsson - - * pop_pass.c: define KRB_VERIFY_SECURE if not defined - - * Makefile.am: include Makefile.am.common - -Wed Mar 17 23:36:21 1999 Assar Westerlund - - * pop_pass.c (krb4_verify_password): use KRB_VERIFY_SECURE instead - of 1 - -Tue Mar 16 22:28:52 1999 Assar Westerlund - - * pop_pass.c: krb_verify_user_multiple -> krb_verify_user - -Sat Mar 13 22:17:29 1999 Assar Westerlund - - * pop_parse.c (pop_parse): cast when calling is* to get rid of a - warning - -Mon Mar 8 11:50:06 1999 Johan Danielsson - - * pop_init.c: use print_version - -Fri Mar 5 15:14:29 1999 Johan Danielsson - - * pop_send.c: fix handling of messages w/o body - -Sun Nov 22 10:33:29 1998 Assar Westerlund - - * pop_pass.c (pop_pass): try to always log - - * Makefile.in (WFLAGS): set - -Fri Jul 10 01:14:25 1998 Assar Westerlund - - * pop_init.c: s/net_read/pop_net_read/ - -Tue Jun 2 17:33:54 1998 Johan Danielsson - - * pop_send.c: add missing newlines - -Sun May 24 20:59:45 1998 Johan Danielsson - - * maildir.c (make_path): fix reversed args - -Sat May 16 00:02:18 1998 Assar Westerlund - - * Makefile.am: link with DBLIB - -Sun Apr 26 11:47:58 1998 Assar Westerlund - - * pop_pass.c (pop_pass): check return value from changeuser - - * pop_dropcopy.c (changeuser): check that `setuid' and `setgid' - succeeded. - - * popper.h: changeuser now returns int - -Thu Apr 23 00:54:38 1998 Johan Danielsson - - * Add support for maildir spoolfiles. - - * popper.h (MsgInfoList): replace `del_flag' and `retr_flag' with - single `flags' - - * pop_dropcopy.c: Fix mismatched parenthesis. - -Sat Apr 4 15:13:56 1998 Assar Westerlund - - * pop_dropcopy.c (pop_dropcopy): first do mkstemp and then fdopen. - Originally from - - * popper.h: include - -Sat Feb 7 10:07:39 1998 Assar Westerlund - - * pop_pass.c(krb4_verify_password: Don't use REALM_SZ + 1, just - REALM_SZ - -Mon Dec 29 16:37:26 1997 Assar Westerlund - - * pop_updt.c (pop_updt): lseek before ftruncating the file. From - - -Sat Nov 22 13:46:39 1997 Johan Danielsson - - * pop_pass.c: Destroy tickets after verification. - -Sun Nov 9 09:11:14 1997 Assar Westerlund - - * pop_dropinfo.c: be careful with mails without msg-id, subject, - or from - -Wed Oct 29 02:09:24 1997 Assar Westerlund - - * pop_pass.c: conditionalize OTP-support - - * pop_init.c: conditionalize OTP-support - diff --git a/crypto/heimdal/appl/popper/Makefile b/crypto/heimdal/appl/popper/Makefile deleted file mode 100644 index 510f8de..0000000 --- a/crypto/heimdal/appl/popper/Makefile +++ /dev/null @@ -1,688 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# appl/popper/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.14 2001/08/04 03:08:02 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_krb4) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -noinst_PROGRAMS = pop_debug - -libexec_PROGRAMS = popper - -popper_SOURCES = \ - pop_dele.c pop_dropcopy.c pop_dropinfo.c \ - pop_get_command.c pop_init.c \ - pop_last.c pop_list.c pop_log.c \ - pop_msg.c pop_parse.c pop_pass.c pop_quit.c \ - pop_rset.c pop_send.c pop_stat.c pop_updt.c \ - pop_user.c pop_uidl.c pop_xover.c popper.c \ - maildir.c popper.h version.h - - -EXTRA_DIST = pop3.rfc1081 pop3e.rfc1082 \ - popper.README.release README-FIRST README-KRB4 - - -LDADD = \ - $(LIB_otp) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(DBLIB) - - -man_MANS = popper.8 -subdir = appl/popper -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -libexec_PROGRAMS = popper$(EXEEXT) -noinst_PROGRAMS = pop_debug$(EXEEXT) -PROGRAMS = $(libexec_PROGRAMS) $(noinst_PROGRAMS) - -pop_debug_SOURCES = pop_debug.c -pop_debug_OBJECTS = pop_debug.$(OBJEXT) -pop_debug_LDADD = $(LDADD) -pop_debug_DEPENDENCIES = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la -#pop_debug_DEPENDENCIES = -pop_debug_LDFLAGS = -am_popper_OBJECTS = pop_dele.$(OBJEXT) pop_dropcopy.$(OBJEXT) \ - pop_dropinfo.$(OBJEXT) pop_get_command.$(OBJEXT) \ - pop_init.$(OBJEXT) pop_last.$(OBJEXT) pop_list.$(OBJEXT) \ - pop_log.$(OBJEXT) pop_msg.$(OBJEXT) pop_parse.$(OBJEXT) \ - pop_pass.$(OBJEXT) pop_quit.$(OBJEXT) pop_rset.$(OBJEXT) \ - pop_send.$(OBJEXT) pop_stat.$(OBJEXT) pop_updt.$(OBJEXT) \ - pop_user.$(OBJEXT) pop_uidl.$(OBJEXT) pop_xover.$(OBJEXT) \ - popper.$(OBJEXT) maildir.$(OBJEXT) -popper_OBJECTS = $(am_popper_OBJECTS) -popper_LDADD = $(LDADD) -popper_DEPENDENCIES = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la -#popper_DEPENDENCIES = -popper_LDFLAGS = - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = pop_debug.c $(popper_SOURCES) -MANS = $(man_MANS) -DIST_COMMON = README ChangeLog Makefile.am Makefile.in -SOURCES = pop_debug.c $(popper_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/popper/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f; \ - else :; fi; \ - done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(libexecdir)/$$f"; \ - rm -f $(DESTDIR)$(libexecdir)/$$f; \ - done - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -pop_debug$(EXEEXT): $(pop_debug_OBJECTS) $(pop_debug_DEPENDENCIES) - @rm -f pop_debug$(EXEEXT) - $(LINK) $(pop_debug_LDFLAGS) $(pop_debug_OBJECTS) $(pop_debug_LDADD) $(LIBS) -popper$(EXEEXT): $(popper_OBJECTS) $(popper_DEPENDENCIES) - @rm -f popper$(EXEEXT) - $(LINK) $(popper_LDFLAGS) $(popper_OBJECTS) $(popper_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man8dir = $(mandir)/man8 -install-man8: $(man8_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man8dir) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ - done -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ - rm -f $(DESTDIR)$(man8dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libexecdir) $(DESTDIR)$(man8dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ - clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-libexecPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man8 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-libexecPROGRAMS uninstall-man - -uninstall-man: uninstall-man8 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-generic clean-libexecPROGRAMS clean-libtool \ - clean-noinstPROGRAMS distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am info info-am install install-am install-data \ - install-data-am install-data-local install-exec install-exec-am \ - install-info install-info-am install-libexecPROGRAMS \ - install-man install-man8 install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-libexecPROGRAMS \ - uninstall-man uninstall-man8 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/popper/Makefile.am b/crypto/heimdal/appl/popper/Makefile.am deleted file mode 100644 index e3311da..0000000 --- a/crypto/heimdal/appl/popper/Makefile.am +++ /dev/null @@ -1,31 +0,0 @@ -# $Id: Makefile.am,v 1.14 2001/08/04 03:08:02 assar Exp $ - -include $(top_srcdir)/Makefile.am.common - -INCLUDES += $(INCLUDE_krb4) - -noinst_PROGRAMS = pop_debug - -libexec_PROGRAMS = popper - -popper_SOURCES = \ - pop_dele.c pop_dropcopy.c pop_dropinfo.c \ - pop_get_command.c pop_init.c \ - pop_last.c pop_list.c pop_log.c \ - pop_msg.c pop_parse.c pop_pass.c pop_quit.c \ - pop_rset.c pop_send.c pop_stat.c pop_updt.c \ - pop_user.c pop_uidl.c pop_xover.c popper.c \ - maildir.c popper.h version.h - -EXTRA_DIST = pop3.rfc1081 pop3e.rfc1082 \ - popper.README.release README-FIRST README-KRB4 - -LDADD = \ - $(LIB_otp) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(DBLIB) - -man_MANS = popper.8 diff --git a/crypto/heimdal/appl/popper/Makefile.in b/crypto/heimdal/appl/popper/Makefile.in deleted file mode 100644 index 59fd8b0..0000000 --- a/crypto/heimdal/appl/popper/Makefile.in +++ /dev/null @@ -1,688 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.14 2001/08/04 03:08:02 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ -WFLAGS = @WFLAGS@ -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_krb4) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -noinst_PROGRAMS = pop_debug - -libexec_PROGRAMS = popper - -popper_SOURCES = \ - pop_dele.c pop_dropcopy.c pop_dropinfo.c \ - pop_get_command.c pop_init.c \ - pop_last.c pop_list.c pop_log.c \ - pop_msg.c pop_parse.c pop_pass.c pop_quit.c \ - pop_rset.c pop_send.c pop_stat.c pop_updt.c \ - pop_user.c pop_uidl.c pop_xover.c popper.c \ - maildir.c popper.h version.h - - -EXTRA_DIST = pop3.rfc1081 pop3e.rfc1082 \ - popper.README.release README-FIRST README-KRB4 - - -LDADD = \ - $(LIB_otp) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(DBLIB) - - -man_MANS = popper.8 -subdir = appl/popper -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -libexec_PROGRAMS = popper$(EXEEXT) -noinst_PROGRAMS = pop_debug$(EXEEXT) -PROGRAMS = $(libexec_PROGRAMS) $(noinst_PROGRAMS) - -pop_debug_SOURCES = pop_debug.c -pop_debug_OBJECTS = pop_debug.$(OBJEXT) -pop_debug_LDADD = $(LDADD) -@KRB5_TRUE@pop_debug_DEPENDENCIES = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB5_FALSE@pop_debug_DEPENDENCIES = -pop_debug_LDFLAGS = -am_popper_OBJECTS = pop_dele.$(OBJEXT) pop_dropcopy.$(OBJEXT) \ - pop_dropinfo.$(OBJEXT) pop_get_command.$(OBJEXT) \ - pop_init.$(OBJEXT) pop_last.$(OBJEXT) pop_list.$(OBJEXT) \ - pop_log.$(OBJEXT) pop_msg.$(OBJEXT) pop_parse.$(OBJEXT) \ - pop_pass.$(OBJEXT) pop_quit.$(OBJEXT) pop_rset.$(OBJEXT) \ - pop_send.$(OBJEXT) pop_stat.$(OBJEXT) pop_updt.$(OBJEXT) \ - pop_user.$(OBJEXT) pop_uidl.$(OBJEXT) pop_xover.$(OBJEXT) \ - popper.$(OBJEXT) maildir.$(OBJEXT) -popper_OBJECTS = $(am_popper_OBJECTS) -popper_LDADD = $(LDADD) -@KRB5_TRUE@popper_DEPENDENCIES = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB5_FALSE@popper_DEPENDENCIES = -popper_LDFLAGS = - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = pop_debug.c $(popper_SOURCES) -MANS = $(man_MANS) -DIST_COMMON = README ChangeLog Makefile.am Makefile.in -SOURCES = pop_debug.c $(popper_SOURCES) - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/popper/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libexecPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libexecdir) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(libexecPROGRAMS_INSTALL) $$p $(DESTDIR)$(libexecdir)/$$f; \ - else :; fi; \ - done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(libexecdir)/$$f"; \ - rm -f $(DESTDIR)$(libexecdir)/$$f; \ - done - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -pop_debug$(EXEEXT): $(pop_debug_OBJECTS) $(pop_debug_DEPENDENCIES) - @rm -f pop_debug$(EXEEXT) - $(LINK) $(pop_debug_LDFLAGS) $(pop_debug_OBJECTS) $(pop_debug_LDADD) $(LIBS) -popper$(EXEEXT): $(popper_OBJECTS) $(popper_DEPENDENCIES) - @rm -f popper$(EXEEXT) - $(LINK) $(popper_LDFLAGS) $(popper_OBJECTS) $(popper_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man8dir = $(mandir)/man8 -install-man8: $(man8_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man8dir) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ - done -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ - rm -f $(DESTDIR)$(man8dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libexecdir) $(DESTDIR)$(man8dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ - clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-libexecPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man8 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-info-am uninstall-libexecPROGRAMS uninstall-man - -uninstall-man: uninstall-man8 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-generic clean-libexecPROGRAMS clean-libtool \ - clean-noinstPROGRAMS distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am info info-am install install-am install-data \ - install-data-am install-data-local install-exec install-exec-am \ - install-info install-info-am install-libexecPROGRAMS \ - install-man install-man8 install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-info-am uninstall-libexecPROGRAMS \ - uninstall-man uninstall-man8 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/popper/README b/crypto/heimdal/appl/popper/README deleted file mode 100644 index 0735fdd..0000000 --- a/crypto/heimdal/appl/popper/README +++ /dev/null @@ -1,381 +0,0 @@ -@(#)@(#)README 2.6 2.6 4/2/91 - - -The Post Office Protocol Server: Installation Guide - - - -Introduction - -The Post Office Protocol server runs on a variety of Unix[1] computers -to manage electronic mail for Macintosh and MS-DOS computers. The -server was developed at the University of California at Berkeley and -conforms fully to the specifications in RFC 1081[2] and RFC 1082[3]. -The Berkeley server also has extensions to send electronic mail on -behalf of a client. - -This guide explains how to install the POP server on your Unix -computer. It assumes that you are not only familiar with Unix but also -capable of performing Unix system administration. - - -How to Obtain the Server - -The POP server is available via anonymous ftp from ftp.CC.Berkeley.EDU -(128.32.136.9, 128.32.206.12). It is in two files in the pub directory: -a compressed tar file popper-version.tar.Z and a Macintosh StuffIt archive -in BinHex format called MacPOP.sit.hqx. - - -Contents of the Distribution - -The distribution contains the following: - -+ All of the C source necessary to create the server program. - -+ A visual representation of how the POP system works. - -+ Reprints of RFC 1081 and RFC 1082. - -+ A HyperCard stack POP client implementation using MacTCP. - -+ A man page for the popper daemon. - -+ This guide. - - -Compatibility - -The Berkeley POP server has been successfully tested on the following -Unix operating systems: - -+ Berkeley Systems Distribution 4.3 - -+ Sun Microsystems Operating System versions 3.5 and 4.0 - -+ Ultrix version 2.3 - -The following POP clients operate correctly with the Berkeley POP server: - -+ The Berkeley HyperMail HyperCard stack for the Apple Macintosh - (distributed with the server). - -+ The Stanford University Macintosh Internet Protocol MacMH program. - -+ The Stanford University Personal Computer Internet Protocol MH - program. - -+ The mh version 6.0 programs for Unix. - - -Support - -The Berkeley POP server is not officially supported and is without any -warranty, explicit or implied. However, we are interested in your -experiences using the server. Bugs, comments and suggestions should be -sent electronically to netinfo@garnet.Berkeley.EDU. - - -Operational Characteristics - -The POP Transaction Cycle - -The Berkeley POP server is a single program (called popper) that is -launched by inetd when it gets a service request on the POP TCP port. -(The official port number specified in RFC 1081 for POP version 3 is -port 110. However, some POP3 clients attempt to contact the server at -port 109, the POP version 2 port. Unless you are running both POP2 and -POP3 servers, you can simply define both ports for use by the POP3 -server. This is explained in the installation instructions later on.) -The popper program initializes and verifies that the peer IP address is -registered in the local domain, logging a warning message when a -connection is made to a client whose IP address does not have a -canonical name. For systems using BSD 4.3 bind, it also checks to see -if a cannonical name lookup for the client returns the same peer IP -address, logging a warning message if it does not. The the server -enters the authorization state, during which the client must correctly -identify itself by providing a valid Unix userid and password on the -server's host machine. No other exchanges are allowed during this -state (other than a request to quit.) If authentication fails, a -warning message is logged and the session ends. Once the user is -identified, popper changes its user and group ids to match that of the -user and enters the transaction state. The server makes a temporary -copy of the user's maildrop (ordinarily in /usr/spool/mail) which is -used for all subsequent transactions. These include the bulk of POP -commands to retrieve mail, delete mail, undelete mail, and so forth. A -Berkeley extension also allows the user to submit a mail parcel to the -server who mails it using the sendmail program (this extension is -supported in the HyperMail client distributed with the server). When -the client quits, the server enters the final update state during which -the network connection is terminated and the user's maildrop is updated -with the (possibly) modified temporary maildrop. - - -Logging - -The POP server uses syslog to keep a record of its activities. On -systems with BSD 4.3 syslogging, the server logs (by default) to the -"local0" facility at priority "notice" for all messages except -debugging which is logged at priority "debug". The default log file is -/usr/spool/mqueue/POPlog. These can be changed, if desired. On -systems with 4.2 syslogging all messages are logged to the local log -file, usually /usr/spool/mqueue/syslog. - -Problems - -If the filesystem which holds the /usr/spool/mail fills up users will -experience difficulties. The filesystem must have enough space to hold -(approximately) two copies of the largest mail box. Popper (v1.81 and -above) is designed to be robust in the face of this problem, but you may -end up with a situation where some of the user's mail is in - - /usr/spool/mail/.userid.pop - -and some of the mail is in - - /usr/spool/mail/userid - -If this happens the System Administrator should clear enough disk space -so that the filesystem has at least as much free disk as both mailboxes -hold and probably a little more. Then the user should initiate a POP -session, and do nothing but quit. If the POP session ends without an -error the user can then use POP or another mail program to clean up his/her -mailbox. - -Alternatively, the System Administrator can combine the two files (but -popper will do this for you if there is enough disk space). - - -Debugging - -The popper program will log debugging information when the -d parameter -is specified after its invocation in the inetd.conf file. Care should -be exercised in using this option since it generates considerable -output in the syslog file. Alternatively, the "-t " option -will place debugging information into file "" using fprintf -instead of syslog. (To enable debugging, you must edit the Makefile -to add -DDEBUG to the compiler options.) - -For SunOS version 3.5, the popper program is launched by inetd from -/etc/servers. This file does not allow you to specify command line -arguments. Therefore, if you want to enable debugging, you can specify -a shell script in /etc/servers to be launched instead of popper and in -this script call popper with the desired arguments. - - -Installation - -1. Examine this file for the latest information, warnings, etc. - -2. Check the Makefile for conformity with your system. - -3. Issue the make command in the directory containing the popper - source. - -4. Issue the make install command in the directory containing the - popper source to copy the program to /usr/etc. - -5. Enable syslogging: - - + For systems with 4.3 syslogging: - - Add the following line to the /etc/syslog.conf file: - - local0.notice;local0.debug /usr/spool/mqueue/POPlog - - Create the empty file /usr/spool/mqueue/POPlog. - - Kill and restart the syslogd daemon. - - + For systems with 4.2 syslogging: - - Be sure that you are logging messages of priority 7 and higher. - For example: - - 7/usr/spool/mqueue/syslog - 9/dev/null - -6. Update /etc/services: - - Add the following line to the /etc/services file: - - pop 110/tcp - - Note: This is the official port number for version 3 of the - Post Office Protocol as defined in RFC 1081. However, some - POP3 clients use port 109, the port number for the previous - version (2) of POP. Therefore you may also want to add the - following line to the /etc/services file: - - pop2 109/tcp - - For Sun systems running yp, also do the following: - - + Change to the /var/yp directory. - - + Issue the make services command. - -7. Update the inetd daemon configuration. Include the second line ONLY if you - are running the server at both ports. - - + On BSD 4.3 and SunOS 4.0 systems, add the following line to the - /etc/inetd.conf file: - - pop stream tcp nowait root /usr/etc/popper popper - pop2 stream tcp nowait root /usr/etc/popper popper - - + On Ultrix systems, add the following line to the - /etc/inetd.conf file: - - pop stream tcp nowait /usr/etc/popper popper - pop2 stream tcp nowait /usr/etc/popper popper - - + On SunOS 3.5 systems, add the following line to the - /etc/servers file: - - pop tcp /usr/etc/popper - pop2 tcp /usr/etc/popper - - Kill and restart the inetd daemon. - -You can confirm that the POP server is running on Unix by telneting to -port 110 (or 109 if you set it up that way). For example: - -%telnet myhost 110 -Trying... -Connected to myhost.berkeley.edu. -Escape character is '^]'. -+OK UCB Pop server (version 1.6) at myhost starting. -quit -Connection closed by foreign host. - - -Release Notes - -1.83 Make sure that everything we do as root is non-destructive. - -1.82 Make the /usr/spool/mail/.userid.pop file owned by the user rather - than owned by root. - -1.81 There were two versions of 1.7 floating around, 1.7b4 and 1.7b5. - The difference is that 1.7b5 attempted to save disk space on - /usr/spool/mail by deleting the users permanent maildrop after - making the temporary copy. Unfortunately, if compiled with - -DDEBUG, this version could easily wipe out a users' mail file. - This is now fixed. - - This version also fixes a security hole for systems that have - /usr/spool/mail writeable by all users. - - With this version we go to all new SCCS IDs for all files. This - is unfortunate, and we hope it is not too much of a problem. - - Thanks to Steve Dorner of UIUC for pointing out the major problem. - -1.7 Extensive re-write of the maildrop processing code contributed by - Viktor Dukhovni that greatly reduces the - possibility that the maildrop can be corrupted as the result of - simultaneous access by two or more processes. - - Added "pop_dropcopy" module to create a temporary maildrop from - the existing, standard maildrop as root before the setuid and - setgid for the user is done. This allows the temporary maildrop - to be created in a mail spool area that is not world read-writable. - - This version does *not* send the sendmail "From " delimiter line - in response to a TOP or RETR command. - - Encased all debugging code in #ifdef DEBUG constructs. This code can - be included by specifying the DEGUG compiler flag. Note: You still - need to use the -d or -t option to obtain debugging output. - -1.6 Corrects a bug that causes the server to crash on SunOS - 4.0 systems. - - Uses varargs and vsprintf (if available) in pop_log and - pop_msg. This is enabled by the "HAVE_VSPRINTF" - compiler flag. - - For systems with BSD 4.3 bind, performs a cannonical - name lookup and searches the returned address(es) for - the client's address, logging a warning message if it - is not located. This is enabled by the "BIND43" - comiler flag. - - Removed all the includes from popper.h and distributed - them throughout the porgrams files, as needed. - - Reformatted the source to convert tabs to spaces and - shorten lines for display on 80-column terminals. - -1.5 Creates the temporary maildrop with mode "600" and - immediately unlinks it. - - Uses client's IP address in lieu of a canonical name if - the latter cannot be obtained. - - Added "-t " option. The presence of this - option causes debugging output to be placed in the file - "file-name" using fprintf instead of the system log - file using syslog. - - Corrected maildrop parsing problem. - -1.4 Copies user's mail into a temporary maildrop on which - all subsequent activity is performed. - - Added "pop_log" function and replaced "syslog" calls - throughout the code with it. - -1.3 Corrected updating of Status: header line. - - Added strncasecmp for systems that do not have one. - Used strncasecmp in all appropriate places. This is - enabled by the STRNCASECMP compiler flag. - -1.2 Support for version 4.2 syslogging added. This is - enabled by the SYSLOG42 compiler flag. - -1.1 Several bugs fixed. - -1.0 Original version. - - -Limitations - -+ The POP server copies the user's entire maildrop to /tmp and - then operates on that copy. If the maildrop is particularly - large, or inadequate space is available in /tmp, then the - server will refuse to continue and terminate the connection. - -+ Simultaneous modification of a single maildrop can result in - confusing results. For example, manipulating messages in a - maildrop using the Unix /usr/ucb/mail command while a copy of - it is being processed by the POP server can cause the changes - made by one program to be lost when the other terminates. This - problem is being worked on and will be fixed in a later - release. - - -Credits - -The POP server was written by Edward Moy and Austin Shelton with -contributions from Robert Campbell (U.C. Berkeley) and Viktor Dukhovni -(Princeton University). Edward Moy wrote the HyperMail stack and drew -the POP operation diagram. This installation guide was written by -Austin Shelton. - - -Footnotes - -[1] Copyright (c) 1990 Regents of the University of California. - All rights reserved. The Berkeley software License Agreement - specifies the terms and conditions for redistribution. Unix is - a registered trademark of AT&T corporation. HyperCard and - Macintosh are registered trademarks of Apple Corporation. - -[2] M. Rose, Post Office Protocol - Version 3. RFC 1081, NIC, - November 1988. - -[3] M. Rose, Post Office Protocol - Version 3 Extended Service - Offerings. RFC 1082, NIC, November 1988. diff --git a/crypto/heimdal/appl/popper/README-FIRST b/crypto/heimdal/appl/popper/README-FIRST deleted file mode 100644 index 3d78fb6..0000000 --- a/crypto/heimdal/appl/popper/README-FIRST +++ /dev/null @@ -1,11 +0,0 @@ -This kerberized popper was based on popper-1.831beta -which was later announced as "offical" and not beta. - -This program is able to talk both the pop3 and the kpop3 protocol. - -Please note that the server principal is pop.hostname and not -rcmd.hostname. I.e an additional entry is needed in your mailhub's -/etc/srvtab. Use ksrvutil to add the extra prinicpal. - -The server is usually started from inetd and there is already an entry -for that in inetd.conf.changes. diff --git a/crypto/heimdal/appl/popper/README-KRB4 b/crypto/heimdal/appl/popper/README-KRB4 deleted file mode 100644 index f029cf9..0000000 --- a/crypto/heimdal/appl/popper/README-KRB4 +++ /dev/null @@ -1,3 +0,0 @@ -Define KERBEROS if you want support for Kerberos V4 style -authentification, then you will be able to start a kerberise pop with -the `-k' flag. diff --git a/crypto/heimdal/appl/popper/maildir.c b/crypto/heimdal/appl/popper/maildir.c deleted file mode 100644 index 4953d4b..0000000 --- a/crypto/heimdal/appl/popper/maildir.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Copyright (c) 1998 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -#include -RCSID("$Id: maildir.c,v 1.6 2001/09/10 11:56:53 joda Exp $"); - -static void -make_path(POP *p, MsgInfoList *mp, int new, char *buf, size_t len) -{ - snprintf(buf, len, "%s/%s%s%s", p->drop_name, - new ? "new" : "cur", mp ? "/" : "", mp ? mp->name : ""); -} - -static int -scan_file(POP *p, MsgInfoList *mp) -{ - char path[MAXPATHLEN]; - FILE *f; - char buf[1024]; - int eoh = 0; - - make_path(p, mp, mp->flags & NEW_FLAG, path, sizeof(path)); - f = fopen(path, "r"); - - if(f == NULL) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, - "Failed to open message file `%s': %s", - path, strerror(errno)); -#endif - return pop_msg (p, POP_FAILURE, - "Failed to open message file `%s'", path); - } - while(fgets(buf, sizeof(buf), f)) { - if(buf[strlen(buf) - 1] == '\n') - mp->lines++; - mp->length += strlen(buf); - if(eoh) - continue; - if(strcmp(buf, "\n") == 0) - eoh = 1; - parse_header(mp, buf); - } - fclose(f); - return add_missing_headers(p, mp); -} - -static int -scan_dir(POP *p, int new) -{ - char tmp[MAXPATHLEN]; - DIR *dir; - struct dirent *dent; - MsgInfoList *mp = p->mlp; - int n_mp = p->msg_count; - int e; - - make_path(p, NULL, new, tmp, sizeof(tmp)); - mkdir(tmp, 0700); - dir = opendir(tmp); - while((dent = readdir(dir)) != NULL) { - if(strcmp(dent->d_name, ".") == 0 || strcmp(dent->d_name, "..") == 0) - continue; - mp = realloc(mp, (n_mp + 1) * sizeof(*mp)); - if(mp == NULL) { - p->msg_count = 0; - return pop_msg (p, POP_FAILURE, - "Can't build message list for '%s': Out of memory", - p->user); - } - memset(mp + n_mp, 0, sizeof(*mp)); - mp[n_mp].name = strdup(dent->d_name); - if(mp[n_mp].name == NULL) { - p->msg_count = 0; - return pop_msg (p, POP_FAILURE, - "Can't build message list for '%s': Out of memory", - p->user); - } - mp[n_mp].number = n_mp + 1; - mp[n_mp].flags = 0; - if(new) - mp[n_mp].flags |= NEW_FLAG; - e = scan_file(p, &mp[n_mp]); - if(e != POP_SUCCESS) - return e; - p->drop_size += mp[n_mp].length; - n_mp++; - } - closedir(dir); - p->mlp = mp; - p->msg_count = n_mp; - return POP_SUCCESS; -} - -int -pop_maildir_info(POP *p) -{ - int e; - - p->temp_drop[0] = '\0'; - p->mlp = NULL; - p->msg_count = 0; - - e = scan_dir(p, 0); - if(e != POP_SUCCESS) return e; - - e = scan_dir(p, 1); - if(e != POP_SUCCESS) return e; - return POP_SUCCESS; -} - -int -pop_maildir_update(POP *p) -{ - int i; - char tmp1[MAXPATHLEN], tmp2[MAXPATHLEN]; - for(i = 0; i < p->msg_count; i++) { - make_path(p, &p->mlp[i], p->mlp[i].flags & NEW_FLAG, - tmp1, sizeof(tmp1)); - if(p->mlp[i].flags & DEL_FLAG) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Removing `%s'", tmp1); -#endif - if(unlink(tmp1) < 0) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Failed to remove `%s': %s", - tmp1, strerror(errno)); -#endif - /* return failure? */ - } - } else if((p->mlp[i].flags & NEW_FLAG) && - (p->mlp[i].flags & RETR_FLAG)) { - make_path(p, &p->mlp[i], 0, tmp2, sizeof(tmp2)); -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Linking `%s' to `%s'", tmp1, tmp2); -#endif - if(link(tmp1, tmp2) == 0) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Removing `%s'", tmp1); -#endif - if(unlink(tmp1) < 0) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Failed to remove `%s'", tmp1); -#endif - /* return failure? */ - } - } else { - if(errno == EXDEV) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Trying to rename `%s' to `%s'", - tmp1, tmp2); -#endif - if(rename(tmp1, tmp2) < 0) { -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, "Failed to rename `%s' to `%s'", - tmp1, tmp2); -#endif - } - } - } - } - } - return(pop_quit(p)); -} - -int -pop_maildir_open(POP *p, MsgInfoList *mp) -{ - char tmp[MAXPATHLEN]; - make_path(p, mp, mp->flags & NEW_FLAG, tmp, sizeof(tmp)); - if(p->drop) - fclose(p->drop); - p->drop = fopen(tmp, "r"); - if(p->drop == NULL) - return pop_msg(p, POP_FAILURE, "Failed to open message file"); - return POP_SUCCESS; -} diff --git a/crypto/heimdal/appl/popper/pop3.rfc1081 b/crypto/heimdal/appl/popper/pop3.rfc1081 deleted file mode 100644 index 08ea6dd..0000000 --- a/crypto/heimdal/appl/popper/pop3.rfc1081 +++ /dev/null @@ -1,898 +0,0 @@ - - - - - - -Network Working Group M. Rose -Request for Comments: 1081 TWG - November 1988 - - Post Office Protocol - Version 3 - - -Status of this Memo - - This memo suggests a simple method for workstations to dynamically - access mail from a mailbox server. This RFC specifies a proposed - protocol for the Internet community, and requests discussion and - suggestions for improvements. Distribution of this memo is - unlimited. - - This memo is based on RFC 918 (since revised as RFC 937). Although - similar in form to the original Post Office Protocol (POP) proposed - for the Internet community, the protocol discussed in this memo is - similar in spirit to the ideas investigated by the MZnet project at - the University of California, Irvine. - - Further, substantial work was done on examining POP in a PC-based - environment. This work, which resulted in additional functionality - in this protocol, was performed by the ACIS Networking Systems Group - at Stanford University. The author gratefully acknowledges their - interest. - -Introduction - - On certain types of smaller nodes in the Internet it is often - impractical to maintain a message transport system (MTS). For - example, a workstation may not have sufficient resources (cycles, - disk space) in order to permit a SMTP server and associated local - mail delivery system to be kept resident and continuously running. - Similarly, it may be expensive (or impossible) to keep a personal - computer interconnected to an IP-style network for long amounts of - time (the node is lacking the resource known as "connectivity"). - - Despite this, it is often very useful to be able to manage mail on - these smaller nodes, and they often support a user agent (UA) to aid - the tasks of mail handling. To solve this problem, a node which can - support an MTS entity offers a maildrop service to these less endowed - nodes. The Post Office Protocol - Version 3 (POP3) is intended to - permit a workstation to dynamically access a maildrop on a server - host in a useful fashion. Usually, this means that the POP3 is used - to allow a workstation to retrieve mail that the server is holding - for it. - - - - -Rose [Page 1] - -RFC 1081 POP3 November 1988 - - - For the remainder of this memo, the term "client host" refers to a - host making use of the POP3 service, while the term "server host" - refers to a host which offers the POP3 service. - -A Short Digression - - This memo does not specify how a client host enters mail into the - transport system, although a method consistent with the philosophy of - this memo is presented here: - - When the user agent on a client host wishes to enter a message - into the transport system, it establishes an SMTP connection to - its relay host (this relay host could be, but need not be, the - POP3 server host for the client host). - - If this method is followed, then the client host appears to the MTS - as a user agent, and should NOT be regarded as a "trusted" MTS entity - in any sense whatsoever. This concept, along with the role of the - POP3 as a part of a split-UA model is discussed later in this memo. - - Initially, the server host starts the POP3 service by listening on - TCP port 110. When a client host wishes to make use of the service, - it establishes a TCP connection with the server host. When the - connection is established, the POP3 server sends a greeting. The - client and POP3 server then exchange commands and responses - (respectively) until the connection is closed or aborted. - - Commands in the POP3 consist of a keyword possibly followed by an - argument. All commands are terminated by a CRLF pair. - - Responses in the POP3 consist of a success indicator and a keyword - possibly followed by additional information. All responses are - terminated by a CRLF pair. There are currently two success - indicators: positive ("+OK") and negative ("-ERR"). - - Responses to certain commands are multi-line. In these cases, which - are clearly indicated below, after sending the first line of the - response and a CRLF, any additional lines are sent, each terminated - by a CRLF pair. When all lines of the response have been sent, a - final line is sent, consisting of a termination octet (decimal code - 046, ".") and a CRLF pair. If any line of the multi-line response - begins with the termination octet, the line is "byte-stuffed" by - pre-pending the termination octet to that line of the response. - Hence a multi-line response is terminated with the five octets - "CRLF.CRLF". When examining a multi-line response, the client checks - to see if the line begins with the termination octet. If so and if - octets other than CRLF follow, the the first octet of the line (the - termination octet) is stripped away. If so and if CRLF immediately - - - -Rose [Page 2] - -RFC 1081 POP3 November 1988 - - - follows the termination character, then the response from the POP - server is ended and the line containing ".CRLF" is not considered - part of the multi-line response. - - A POP3 session progresses through a number of states during its - lifetime. Once the TCP connection has been opened and the POP3 - server has sent the greeting, the session enters the AUTHORIZATION - state. In this state, the client must identify itself to the POP3 - server. Once the client has successfully done this, the server - acquires resources associated with the client's maildrop, and the - session enters the TRANSACTION state. In this state, the client - requests actions on the part of the POP3 server. When the client has - finished its transactions, the session enters the UPDATE state. In - this state, the POP3 server releases any resources acquired during - the TRANSACTION state and says goodbye. The TCP connection is then - closed. - -The AUTHORIZATION State - - Once the TCP connection has been opened by a POP3 client, the POP3 - server issues a one line greeting. This can be any string terminated - by CRLF. An example might be: - - S. +OK dewey POP3 server ready (Comments to: PostMaster@UDEL.EDU) - - Note that this greeting is a POP3 reply. The POP3 server should - always give a positive response as the greeting. - - The POP3 session is now in the AUTHORIZATION state. The client must - now issue the USER command. If the POP3 server responds with a - positive success indicator ("+OK"), then the client may issue either - the PASS command to complete the authorization, or the QUIT command - to terminate the POP3 session. If the POP3 server responds with a - negative success indicator ("-ERR") to the USER command, then the - client may either issue a new USER command or may issue the QUIT - command. - - When the client issues the PASS command, the POP3 server uses the - argument pair from the USER and PASS commands to determine if the - client should be given access to the appropriate maildrop. If so, - the POP3 server then acquires an exclusive-access lock on the - maildrop. If the lock is successfully acquired, the POP3 server - parses the maildrop into individual messages (read note below), - determines the last message (if any) present in the maildrop that was - referenced by the RETR command, and responds with a positive success - indicator. The POP3 session now enters the TRANSACTION state. If - the lock can not be acquired or the client should is denied access to - the appropriate maildrop or the maildrop can't be parsed for some - - - -Rose [Page 3] - -RFC 1081 POP3 November 1988 - - - reason, the POP3 server responds with a negative success indicator. - (If a lock was acquired but the POP3 server intends to respond with a - negative success indicator, the POP3 server must release the lock - prior to rejecting the command.) At this point, the client may - either issue a new USER command and start again, or the client may - issue the QUIT command. - - NOTE: Minimal implementations of the POP3 need only be - able to break a maildrop into its component messages; - they need NOT be able to parse individual messages. - More advanced implementations may wish to have this - capability, for reasons discussed later. - - After the POP3 server has parsed the maildrop into individual - messages, it assigns a message-id to each message, and notes the size - of the message in octets. The first message in the maildrop is - assigned a message-id of "1", the second is assigned "2", and so on, - so that the n'th message in a maildrop is assigned a message-id of - "n". In POP3 commands and responses, all message-id's and message - sizes are expressed in base-10 (i.e., decimal). - - It sets the "highest number accessed" to be that of the last message - referenced by the RETR command. - - Here are summaries for the three POP3 commands discussed thus far: - - USER name - Arguments: a server specific user-id (required) - Restrictions: may only be given in the AUTHORIZATION - state after the POP3 greeting or after an - unsuccessful USER or PASS command - Possible Responses: - +OK name is welcome here - -ERR never heard of name - Examples: - C: USER mrose - S: +OK mrose is a real hoopy frood - ... - C: USER frated - S: -ERR sorry, frated doesn't get his mail here - - PASS string - Arguments: a server/user-id specific password (required) - Restrictions: may only be given in the AUTHORIZATION - state after a successful USER command - Possible Responses: - +OK maildrop locked and ready - -ERR invalid password - - - -Rose [Page 4] - -RFC 1081 POP3 November 1988 - - - -ERR unable to lock maildrop - Examples: - C: USER mrose - S: +OK mrose is a real hoopy frood - C: PASS secret - S: +OK mrose's maildrop has 2 messages - (320 octets) - ... - C: USER mrose - S: +OK mrose is a real hoopy frood - C: PASS secret - S: -ERR unable to lock mrose's maildrop, file - already locked - - QUIT - Arguments: none - Restrictions: none - Possible Responses: - +OK - Examples: - C: QUIT - S: +OK dewey POP3 server signing off - - -The TRANSACTION State - - Once the client has successfully identified itself to the POP3 server - and the POP3 server has locked and burst the appropriate maildrop, - the POP3 session is now in the TRANSACTION state. The client may now - issue any of the following POP3 commands repeatedly. After each - command, the POP3 server issues a response. Eventually, the client - issues the QUIT command and the POP3 session enters the UPDATE state. - - Here are the POP3 commands valid in the TRANSACTION state: - - STAT - Arguments: none - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - The POP3 server issues a positive response with a line - containing information for the maildrop. This line is - called a "drop listing" for that maildrop. - - In order to simplify parsing, all POP3 servers are - required to use a certain format for drop listings. - The first octets present must indicate the number of - messages in the maildrop. Following this is the size - - - -Rose [Page 5] - -RFC 1081 POP3 November 1988 - - - of the maildrop in octets. This memo makes no - requirement on what follows the maildrop size. - Minimal implementations should just end that line of - the response with a CRLF pair. More advanced - implementations may include other information. - - NOTE: This memo STRONGLY discourages - implementations from supplying additional - information in the drop listing. Other, - optional, facilities are discussed later on - which permit the client to parse the messages - in the maildrop. - - Note that messages marked as deleted are not counted in - either total. - - Possible Responses: - +OK nn mm - Examples: - C: STAT - S: +OK 2 320 - - LIST [msg] - Arguments: a message-id (optionally) If a message-id is - given, it may NOT refer to a message marked as - deleted. - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - If an argument was given and the POP3 server issues a - positive response with a line containing information - for that message. This line is called a "scan listing" - for that message. - - If no argument was given and the POP3 server issues a - positive response, then the response given is - multi-line. After the initial +OK, for each message - in the maildrop, the POP3 server responds with a line - containing information for that message. This line - is called a "scan listing" for that message. - - In order to simplify parsing, all POP3 servers are - required to use a certain format for scan listings. - The first octets present must be the message-id of - the message. Following the message-id is the size of - the message in octets. This memo makes no requirement - on what follows the message size in the scan listing. - Minimal implementations should just end that line of - - - -Rose [Page 6] - -RFC 1081 POP3 November 1988 - - - the response with a CRLF pair. More advanced - implementations may include other information, as - parsed from the message. - - NOTE: This memo STRONGLY discourages - implementations from supplying additional - information in the scan listing. Other, optional, - facilities are discussed later on which permit - the client to parse the messages in the maildrop. - - Note that messages marked as deleted are not listed. - - Possible Responses: - +OK scan listing follows - -ERR no such message - Examples: - C: LIST - S: +OK 2 messages (320 octets) - S: 1 120 - S: 2 200 - S: . - ... - C: LIST 2 - S: +OK 2 200 - ... - C: LIST 3 - S: -ERR no such message, only 2 messages in - maildrop - - RETR msg - Arguments: a message-id (required) This message-id may - NOT refer to a message marked as deleted. - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - If the POP3 server issues a positive response, then the - response given is multi-line. After the initial +OK, - the POP3 server sends the message corresponding to the - given message-id, being careful to byte-stuff the - termination character (as with all multi-line - responses). - - If the number associated with this message is higher - than the "highest number accessed" in the maildrop, the - POP3 server updates the "highest number accessed" to - the number associated with this message. - - - - - -Rose [Page 7] - -RFC 1081 POP3 November 1988 - - - Possible Responses: - +OK message follows - -ERR no such message - Examples: - C: RETR 1 - S: +OK 120 octets - S: - S: . - - DELE msg - Arguments: a message-id (required) This message-id - may NOT refer to a message marked as deleted. - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - The POP3 server marks the message as deleted. Any - future reference to the message-id associated with the - message in a POP3 command generates an error. The POP3 - server does not actually delete the message until the - POP3 session enters the UPDATE state. - - If the number associated with this message is higher - than the "highest number accessed" in the maildrop, - the POP3 server updates the "highest number accessed" - to the number associated with this message. - - Possible Responses: - +OK message deleted - -ERR no such message - Examples: - C: DELE 1 - S: +OK message 1 deleted - ... - C: DELE 2 - S: -ERR message 2 already deleted - - NOOP - Arguments: none - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - The POP3 server does nothing, it merely replies with a - positive response. - - Possible Responses: - +OK - - - - - -Rose [Page 8] - -RFC 1081 POP3 November 1988 - - - Examples: - C: NOOP - S: +OK - - LAST - Arguments: none - Restrictions: may only be issued in the TRANSACTION state. - Discussion: - - The POP3 server issues a positive response with a line - containing the highest message number which accessed. - Zero is returned in case no message in the maildrop has - been accessed during previous transactions. A client - may thereafter infer that messages, if any, numbered - greater than the response to the LAST command are - messages not yet accessed by the client. - - Possible Response: - +OK nn - - Examples: - C: STAT - S: +OK 4 320 - C: LAST - S: +OK 1 - C: RETR 3 - S: +OK 120 octets - S: - S: . - C: LAST - S: +OK 3 - C: DELE 2 - S: +OK message 2 deleted - C: LAST - S: +OK 3 - C: RSET - S: +OK - C: LAST - S: +OK 1 - - RSET - Arguments: none - Restrictions: may only be given in the TRANSACTION - state. - Discussion: - - If any messages have been marked as deleted by the POP3 - - - -Rose [Page 9] - -RFC 1081 POP3 November 1988 - - - server, they are unmarked. The POP3 server then - replies with a positive response. In addition, the - "highest number accessed" is also reset to the value - determined at the beginning of the POP3 session. - - Possible Responses: - +OK - Examples: - C: RSET - S: +OK maildrop has 2 messages (320 octets) - - - -The UPDATE State - - When the client issues the QUIT command from the TRANSACTION state, - the POP3 session enters the UPDATE state. (Note that if the client - issues the QUIT command from the AUTHORIZATION state, the POP3 - session terminates but does NOT enter the UPDATE state.) - - QUIT - Arguments: none - Restrictions: none - Discussion: - - The POP3 server removes all messages marked as deleted - from the maildrop. It then releases the - exclusive-access lock on the maildrop and replies as - to the success of - these operations. The TCP connection is then closed. - - Possible Responses: - +OK - Examples: - C: QUIT - S: +OK dewey POP3 server signing off (maildrop - empty) - ... - C: QUIT - S: +OK dewey POP3 server signing off (2 messages - left) - ... - - -Optional POP3 Commands - - The POP3 commands discussed above must be supported by all minimal - implementations of POP3 servers. - - - -Rose [Page 10] - -RFC 1081 POP3 November 1988 - - - The optional POP3 commands described below permit a POP3 client - greater freedom in message handling, while preserving a simple POP3 - server implementation. - - NOTE: This memo STRONGLY encourages implementations to - support these commands in lieu of developing augmented - drop and scan listings. In short, the philosophy of - this memo is to put intelligence in the part of the - POP3 client and not the POP3 server. - - TOP msg n - Arguments: a message-id (required) and a number. This - message-id may NOT refer to a message marked as - deleted. - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - If the POP3 server issues a positive response, then - the response given is multi-line. After the initial - +OK, the POP3 server sends the headers of the message, - the blank line separating the headers from the body, - and then the number of lines indicated message's body, - being careful to byte-stuff the termination character - (as with all multi-line responses). - - Note that if the number of lines requested by the POP3 - client is greater than than the number of lines in the - body, then the POP3 server sends the entire message. - - Possible Responses: - +OK top of message follows - -ERR no such message - Examples: - C: TOP 10 - S: +OK - S: - S: . - ... - C: TOP 100 - S: -ERR no such message - - RPOP user - Arguments: a client specific user-id (required) - Restrictions: may only be given in the AUTHORIZATION - state after a successful USER command; in addition, - may only be given if the client used a reserved - - - -Rose [Page 11] - -RFC 1081 POP3 November 1988 - - - (privileged) TCP port to connect to the server. - Discussion: - - The RPOP command may be used instead of the PASS - command to authenticate access to the maildrop. In - order for this command to be successful, the POP3 - client must use a reserved TCP port (port < 1024) to - connect tothe server. The POP3 server uses the - argument pair from the USER and RPOP commands to - determine if the client should be given access to - the appropriate maildrop. Unlike the PASS command - however, the POP3 server considers if the remote user - specified by the RPOP command who resides on the POP3 - client host is allowed to access the maildrop for the - user specified by the USER command (e.g., on Berkeley - UNIX, the .rhosts mechanism is used). With the - exception of this differing in authentication, this - command is identical to the PASS command. - - Note that the use of this feature has allowed much wider - penetration into numerous hosts on local networks (and - sometimes remote networks) by those who gain illegal - access to computers by guessing passwords or otherwise - breaking into the system. - - Possible Responses: - +OK maildrop locked and ready - -ERR permission denied - Examples: - C: USER mrose - S: +OK mrose is a real hoopy frood - C: RPOP mrose - S: +OK mrose's maildrop has 2 messages (320 - octets) - - Minimal POP3 Commands: - USER name valid in the AUTHORIZATION state - PASS string - QUIT - - STAT valid in the TRANSACTION state - LIST [msg] - RETR msg - DELE msg - NOOP - LAST - RSET - - - - -Rose [Page 12] - -RFC 1081 POP3 November 1988 - - - QUIT valid in the UPDATE state - - Optional POP3 Commands: - RPOP user valid in the AUTHORIZATION state - - TOP msg n valid in the TRANSACTION state - - POP3 Replies: - +OK - -ERR - - Note that with the exception of the STAT command, the reply given - by the POP3 server to any command is significant only to "+OK" - and "-ERR". Any text occurring after this reply may be ignored - by the client. - -Example POP3 Session - - S: - ... - C: - S: +OK dewey POP3 server ready (Comments to: PostMaster@UDEL.EDU) - C: USER mrose - S: +OK mrose is a real hoopy frood - C: PASS secret - S: +OK mrose's maildrop has 2 messages (320 octets) - C: STAT - S: +OK 2 320 - C: LIST - S: +OK 2 messages (320 octets) - S: 1 120 - S: 2 200 - S: . - C: RETR 1 - S: +OK 120 octets - S: - S: . - C: DELE 1 - S: +OK message 1 deleted - C: RETR 2 - S: +OK 200 octets - S: - S: . - C: DELE 2 - S: +OK message 2 deleted - C: QUIT - - - - - -Rose [Page 13] - -RFC 1081 POP3 November 1988 - - - S: +OK dewey POP3 server signing off (maildrop empty) - C: - S: - -Message Format - - All messages transmitted during a POP3 session are assumed to conform - to the standard for the format of Internet text messages [RFC822]. - - It is important to note that the byte count for a message on the - server host may differ from the octet count assigned to that message - due to local conventions for designating end-of-line. Usually, - during the AUTHORIZATION state of the POP3 session, the POP3 client - can calculate the size of each message in octets when it parses the - maildrop into messages. For example, if the POP3 server host - internally represents end-of-line as a single character, then the - POP3 server simply counts each occurrence of this character in a - message as two octets. Note that lines in the message which start - with the termination octet need not be counted twice, since the POP3 - client will remove all byte-stuffed termination characters when it - receives a multi-line response. - -The POP and the Split-UA model - - The underlying paradigm in which the POP3 functions is that of a - split-UA model. The POP3 client host, being a remote PC based - workstation, acts solely as a client to the message transport system. - It does not provide delivery/authentication services to others. - Hence, it is acting as a UA, on behalf of the person using the - workstation. Furthermore, the workstation uses SMTP to enter mail - into the MTS. - - In this sense, we have two UA functions which interface to the - message transport system: Posting (SMTP) and Retrieval (POP3). The - entity which supports this type of environment is called a split-UA - (since the user agent is split between two hosts which must - interoperate to provide these functions). - - ASIDE: Others might term this a remote-UA instead. - There are arguments supporting the use of both terms. - - This memo has explicitly referenced TCP as the underlying transport - agent for the POP3. This need not be the case. In the MZnet split- - UA, for example, personal micro-computer systems are used which do - not have IP-style networking capability. To connect to the POP3 - server host, a PC establishes a terminal connection using some simple - protocol (PhoneNet). A program on the PC drives the connection, - first establishing a login session as a normal user. The login shell - - - -Rose [Page 14] - -RFC 1081 POP3 November 1988 - - - for this pseudo-user is a program which drives the other half of the - terminal protocol and communicates with one of two servers. Although - MZnet can support several PCs, a single pseudo-user login is present - on the server host. The user-id and password for this pseudo-user - login is known to all members of MZnet. Hence, the first action of - the login shell, after starting the terminal protocol, is to demand a - USER/PASS authorization pair from the PC. This second level of - authorization is used to ascertain who is interacting with the MTS. - Although the server host is deemed to support a "trusted" MTS entity, - PCs in MZnet are not. Naturally, the USER/PASS authorization pair - for a PC is known only to the owner of the PC (in theory, at least). - - After successfully verifying the identity of the client, a modified - SMTP server is started, and the PC posts mail with the server host. - After the QUIT command is given to the SMTP server and it terminates, - a modified POP3 server is started, and the PC retrieves mail from the - server host. After the QUIT command is given to the POP3 server and - it terminates, the login shell for the pseudo-user terminates the - terminal protocol and logs the job out. The PC then closes the - terminal connection to the server host. - - The SMTP server used by MZnet is modified in the sense that it knows - that it's talking to a user agent and not a "trusted" entity in the - message transport system. Hence, it does performs the validation - activities normally performed by an entity in the MTS when it accepts - a message from a UA. - - The POP3 server used by MZnet is modified in the sense that it does - not require a USER/PASS combination before entering the TRANSACTION - state. The reason for this (of course) is that the PC has already - identified itself during the second-level authorization step - described above. - - NOTE: Truth in advertising laws require that the author - of this memo state that MZnet has not actually been - fully implemented. The concepts presented and proven - by the project led to the notion of the MZnet - split-slot model. This notion has inspired the - split-UA concept described in this memo, led to the - author's interest in the POP, and heavily influenced - the the description of the POP3 herein. - - In fact, some UAs present in the Internet already support the notion - of posting directly to an SMTP server and retrieving mail directly - from a POP server, even if the POP server and client resided on the - same host! - - ASIDE: this discussion raises an issue which this memo - - - -Rose [Page 15] - -RFC 1081 POP3 November 1988 - - - purposedly avoids: how does SMTP know that it's talking - to a "trusted" MTS entity? - -References - - [MZnet] Stefferud, E., J. Sweet, and T. Domae, "MZnet: Mail - Service for Personal Micro-Computer Systems", - Proceedings, IFIP 6.5 International Conference on - Computer Message Systems, Nottingham, U.K., May 1984. - - [RFC821] Postel, J., "Simple Mail Transfer Protocol", - USC/Information Sciences Institute, August 1982. - - [RFC822] Crocker, D., "Standard for the Format of ARPA-Internet - Text Messages", University of Delaware, August 1982. - - [RFC937] Butler, M., J. Postel, D. Chase, J. Goldberger, and J. - Reynolds, "Post Office Protocol - Version 2", RFC 937, - USC/Information Sciences Institute, February 1985. - - [RFC1010] Reynolds, J., and J. Postel, "Assigned Numbers", RFC - 1010, USC/Information Sciences Institute, May 1987. - -Author's Address: - - - Marshall Rose - The Wollongong Group - 1129 San Antonio Rd. - Palo Alto, California 94303 - - Phone: (415) 962-7100 - - Email: MRose@TWG.COM - - - - - - - - - - - - - - - - - -Rose [Page 16] diff --git a/crypto/heimdal/appl/popper/pop3e.rfc1082 b/crypto/heimdal/appl/popper/pop3e.rfc1082 deleted file mode 100644 index ac49448..0000000 --- a/crypto/heimdal/appl/popper/pop3e.rfc1082 +++ /dev/null @@ -1,619 +0,0 @@ - - - - - - -Network Working Group M. Rose -Request for Comments: 1082 TWG - November 1988 - - - - Post Office Protocol - Version 3 - Extended Service Offerings - -Status of This Memo - - This memo suggests a simple method for workstations to dynamically - access mail from a discussion group server, as an extension to an - earlier memo which dealt with dynamically accessing mail from a - mailbox server using the Post Office Protocol - Version 3 (POP3). - This RFC specifies a proposed protocol for the Internet community, - and requests discussion and suggestions for improvements. All of the - extensions described in this memo to the POP3 are OPTIONAL. - Distribution of this memo is unlimited. - -Introduction and Motivation - - It is assumed that the reader is familiar with RFC 1081 that - discusses the Post Office Protocol - Version 3 (POP3) [RFC1081]. - This memo describes extensions to the POP3 which enhance the service - it offers to clients. This additional service permits a client host - to access discussion group mail, which is often kept in a separate - spool area, using the general POP3 facilities. - - The next section describes the evolution of discussion groups and the - technologies currently used to implement them. To summarize: - - o An exploder is used to map from a single address to - a list of addresses which subscribe to the list, and redirects - any subsequent error reports associated with the delivery of - each message. This has two primary advantages: - - Subscribers need know only a single address - - Responsible parties get the error reports and not - the subscribers - - - - - - - - - - - - -Rose [Page 1] - -RFC 1082 POP3 Extended Service November 1988 - - - o Typically, each subscription address is not a person's private - maildrop, but a system-wide maildrop, which can be accessed - by more than one user. This has several advantages: - - Only a single copy of each message need traverse the - net for a given site (which may contain several local - hosts). This conserves bandwidth and cycles. - - Only a single copy of each message need reside on each - subscribing host. This conserves disk space. - - The private maildrop for each user is not cluttered - with discussion group mail. - - Despite this optimization of resources, further economy can be - achieved at sites with more than one host. Typically, sites with - more than one host either: - - 1. Replicate discussion group mail on each host. This - results in literally gigabytes of disk space committed to - unnecessarily store redundant information. - - 2. Keep discussion group mail on one host and give all users a - login on that host (in addition to any other logins they may - have). This is usually a gross inconvenience for users who - work on other hosts, or a burden to users who are forced to - work on that host. - - As discussed in [RFC1081], the problem of giving workstations dynamic - access to mail from a mailbox server has been explored in great - detail (originally there was [RFC918], this prompted the author to - write [RFC1081], independently of this [RFC918] was upgraded to - [RFC937]). A natural solution to the problem outlined above is to - keep discussion group mail on a mailbox server at each site and - permit different hosts at that site to employ the POP3 to access - discussion group mail. If implemented properly, this avoids the - problems of both strategies outlined above. - - ASIDE: It might be noted that a good distributed filesystem - could also solve this problem. Sadly, "good" - distributed filesystems, which do not suffer - unacceptable response time for interactive use, are - few and far between these days! - - Given this motivation, now let's consider discussion groups, both in - general and from the point of view of a user agent. Following this, - extensions to the POP3 defined in [RFC1081] are presented. Finally, - some additional policy details are discussed along with some initial - experiences. - - - - - -Rose [Page 2] - -RFC 1082 POP3 Extended Service November 1988 - - -What's in a Discussion Group - - Since mailers and user agents first crawled out of the primordial - ARPAnet, the value of discussion groups have been appreciated, - (though their implementation has not always been well-understood). - - Described simply, a discussion group is composed of a number of - subscribers with a common interest. These subscribers post mail to a - single address, known as a distribution address. From this - distribution address, a copy of the message is sent to each - subscriber. Each group has a moderator, which is the person that - administrates the group. The moderator can usually be reached at a - special address, known as a request address. Usually, the - responsibilities of the moderator are quite simple, since the mail - system handles the distribution to subscribers automatically. In - some cases, the interest group, instead of being distributed directly - to its subscribers, is put into a digest format by the moderator and - then sent to the subscribers. Although this requires more work on - the part of the moderator, such groups tend to be better organized. - - Unfortunately, there are a few problems with the scheme outlined - above. First, if two users on the same host subscribe to the same - interest group, two copies of the message get delivered. This is - wasteful of both processor and disk resources. - - Second, some of these groups carry a lot of traffic. Although - subscription to an group does indicate interest on the part of a - subscriber, it is usually not interesting to get 50 messages or so - delivered to the user's private maildrop each day, interspersed with - personal mail, that is likely to be of a much more important and - timely nature. - - Third, if a subscriber on the distribution list for a group becomes - "bad" somehow, the originator of the message and not the moderator of - the group is notified. It is not uncommon for a large list to have - 10 or so bogus addresses present. This results in the originator - being flooded with "error messages" from mailers across the Internet - stating that a given address on the list was bad. Needless to say, - the originator usually could not care less if the bogus addresses got - a copy of the message or not. The originator is merely interested in - posting a message to the group at large. Furthermore, the moderator - of the group does care if there are bogus addresses on the list, but - ironically does not receive notification. - - There are various approaches which can be used to solve some or all - of these problems. Usually these involve placing an exploder agent - at the distribution source of the discussion group, which expands the - name of the group into the list of subscription addresses for the - - - -Rose [Page 3] - -RFC 1082 POP3 Extended Service November 1988 - - - group. In the process, the exploder will also change the address - that receives error notifications to be the request address or other - responsible party. - - A complementary approach, used in order to cut down on resource - utilization of all kinds, replaces all the subscribers at a single - host (or group of hosts under a single administration) with a single - address at that host. This address maps to a file on the host, - usually in a spool area, which all users can access. (Advanced - implementations can also implement private discussion groups this - way, in which a single copy of each message is kept, but is - accessible to only a select number of users on the host.) - - The two approaches can be combined to avoid all of the problems - described above. - - Finally, a third approach can be taken, which can be used to aid user - agents processing mail for the discussion group: In order to speed - querying of the maildrop which contains the local host's copy of the - discussion group, two other items are usually associated with the - discussion group, on a local basis. These are the maxima and the - last-date. Each time a message is received for the group on the - local host, the maxima is increased by at least one. Furthermore, - when a new maxima is generated, the current date is determined. This - is called the last date. As the message is entered into the local - maildrop, it is given the current maxima and last-date. This permits - the user agent to quickly determine if new messages are present in - the maildrop. - - NOTE: The maxima may be characterized as a monotonically - increasing quanity. Although sucessive values of the - maxima need not be consecutive, any maxima assigned - is always greater than any previously assigned value. - -Definition of Terms - - To formalize these notions somewhat, consider the following 7 - parameters which describe a given discussion group from the - perspective of the user agent (the syntax given is from [RFC822]): - - - - - - - - - - - - -Rose [Page 4] - -RFC 1082 POP3 Extended Service November 1988 - - - NAME Meaning: the name of the discussion group - Syntax: TOKEN (ALPHA *[ ALPHA / DIGIT / "-" ]) - (case-insensitive recognition) - Example: unix-wizards - - ALIASES Meaning: alternates names for the group, which - are locally meaningful; these are - typically used to shorten user typein - Syntax: TOKEN (case-insensitive recognition) - Example: uwiz - - ADDRESS Meaning: the primary source of the group - Syntax: 822 address - Example: Unix-Wizards@BRL.MIL - - REQUEST Meaning: the primary moderator of the group - Syntax: 822 address - Example: Unix-Wizards-Request@BRL.MIL - - FLAGS Meaning: locally meaningful flags associated - with the discussion group; this memo - leaves interpretation of this - parameter to each POP3 implementation - Syntax: octal number - Example: 01 - - MAXIMA Meaning: the magic cookie associated with the - last message locally received for the - group; it is the property of the magic - cookie that it's value NEVER - decreases, and increases by at least - one each time a message is locally - received - Syntax: decimal number - Example: 1004 - - LASTDATE Meaning: the date that the last message was - locally received - Syntax: 822 date - Example: Thu, 19 Dec 85 10:26:48 -0800 - - Note that the last two values are locally determined for the maildrop - associated with the discussion group and with each message in that - maildrop. Note however that the last message in the maildrop have a - different MAXIMA and LASTDATE than the discussion group. This often - occurs when the maildrop has been archived. - - - - - -Rose [Page 5] - -RFC 1082 POP3 Extended Service November 1988 - - - Finally, some local systems provide mechanisms for automatically - archiving discussion group mail. In some cases, a two-level archive - scheme is used: current mail is kept in the standard maildrop, - recent mail is kept in an archive maildrop, and older mail is kept - off-line. With this scheme, in addition to having a "standard" - maildrop for each discussion group, an "archive" maildrop may also be - available. This permits a user agent to examine the most recent - archive using the same mechanisms as those used on the current mail. - -The XTND Command - - The following commands are valid only in the TRANSACTION state of the - POP3. This implies that the POP3 server has already opened the - user's maildrop (which may be empty). This maildrop is called the - "default maildrop". The phrase "closes the current maildrop" has two - meanings, depending on whether the current maildrop is the default - maildrop or is a maildrop associated with a discussion group. - - In the former context, when the current maildrop is closed any - messages marked as deleted are removed from the maildrop currently in - use. The exclusive-access lock on the maildrop is then released - along with any implementation-specific resources (e.g., file- - descriptors). - - In the latter context, a maildrop associated with a discussion group - is considered to be read-only to the POP3 client. In this case, the - phrase "closes the current maildrop" merely means that any - implementation-specific resources are released. (Hence, the POP3 - command DELE is a no-op.) - - All the new facilities are introduced via a single POP3 command, - XTND. All positive reponses to the XTND command are multi-line. - - The most common multi-line response to the commands contains a - "discussion group listing" which presents the name of the discussion - group along with it's maxima. In order to simplify parsing all POP3 - servers are required to use a certain format for discussion group - listings: - - NAME SP MAXIMA - - This memo makes no requirement on what follows the maxima in the - listing. Minimal implementations should just end that line of the - response with a CRLF pair. More advanced implementations may include - other information, as parsed from the message. - - NOTE: This memo STRONGLY discourages implementations from - supplying additional information in the listing. - - - -Rose [Page 6] - -RFC 1082 POP3 Extended Service November 1988 - - - XTND BBOARDS [name] - Arguments: the name of a discussion group (optionally) - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - If an argument was given, the POP3 server closes the current - maildrop. The POP3 server then validates the argument as the name of - a discussion group. If this is successful, it opens the maildrop - associated with the group, and returns a multi-line response - containing the discussion group listing. If the discussion group - named is not valid, or the associated archive maildrop is not - readable by the user, then an error response is returned. - - If no argument was given, the POP3 server issues a multi-line - response. After the initial +OK, for each discussion group known, - the POP3 server responds with a line containing the listing for that - discussion group. Note that only world-readable discussion groups - are included in the multi-line response. - - In order to aid user agents, this memo requires an extension to the - scan listing when an "XTND BBOARDS" command has been given. - Normally, a scan listing, as generated by the LIST, takes the form: - - MSGNO SIZE - - where MSGNO is the number of the message being listed and SIZE is the - size of the message in octets. When reading a maildrop accessed via - "XTND BBOARDS", the scan listing takes the form - - MSGNO SIZE MAXIMA - - where MAXIMA is the maxima that was assigned to the message when it - was placed in the BBoard. - - Possible Responses: - +OK XTND - -ERR no such bboard - Examples: - C: XTND BBOARDS - S: +OK XTND - S: system 10 - S: mh-users 100 - S: . - C: XTND BBOARDS system - S: + OK XTND - S: system 10 - S: . - - - - -Rose [Page 7] - -RFC 1082 POP3 Extended Service November 1988 - - - XTND ARCHIVE name - Arguments: the name of a discussion group (required) - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - The POP3 server closes the current maildrop. The POP3 server then - validates the argument as the name of a discussion group. If this is - successful, it opens the archive maildrop associated with the group, - and returns a multi-line response containing the discussion group - listing. If the discussion group named is not valid, or the - associated archive maildrop is not readable by the user, then an - error response is returned. - - In addition, the scan listing generated by the LIST command is - augmented (as described above). - - Possible Responses: - +OK XTND - -ERR no such bboard Examples: - C: XTND ARCHIVE system - S: + OK XTND - S: system 3 - S: . - - XTND X-BBOARDS name - Arguments: the name of a discussion group (required) - Restrictions: may only be given in the TRANSACTION state. - Discussion: - - The POP3 server validates the argument as the name of a - discussion group. If this is unsuccessful, then an error - response is returned. Otherwise a multi-line response is - returned. The first 14 lines of this response (after the - initial +OK) are defined in this memo. Minimal implementations - need not include other information (and may omit certain - information, outputing a bare CRLF pair). More advanced - implementations may include other information. - - Line Information (refer to "Definition of Terms") - ---- ----------- - 1 NAME - 2 ALIASES, separated by SP - 3 system-specific: maildrop - 4 system-specific: archive maildrop - 5 system-specific: information - 6 system-specific: maildrop map - 7 system-specific: encrypted password - 8 system-specific: local leaders, separated by SP - - - -Rose [Page 8] - -RFC 1082 POP3 Extended Service November 1988 - - - 9 ADDRESS - 10 REQUEST - 11 system-specific: incoming feed - 12 system-specific: outgoing feeds - 13 FLAGS SP MAXIMA - 14 LASTDATE - - Most of this information is entirely too specific to the UCI Version - of the Rand MH Message Handling System [MRose85]. Nevertheless, - lines 1, 2, 9, 10, 13, and 14 are of general interest, regardless of - the implementation. - - Possible Responses: - +OK XTND - -ERR no such bboard - Examples: - C: XTND X-BBOARDS system - S: + OK XTND - S: system - S: local general - S: /usr/bboards/system.mbox - S: /usr/bboards/archive/system.mbox - S: /usr/bboards/.system.cnt - S: /usr/bboards/.system.map - S: * - S: mother - S: system@nrtc.northrop.com - S: system-request@nrtc.northrop.com - S: - S: dist-system@nrtc-gremlin.northrop.com - S: 01 10 - S: Thu, 19 Dec 85 00:08:49 -0800 - S: . - -Policy Notes - - Depending on the particular entity administrating the POP3 service - host, two additional policies might be implemented: - - 1. Private Discussion Groups - - In the general case, discussion groups are world-readable, any user, - once logged in (via a terminal, terminal server, or POP3, etc.), is - able to read the maildrop for each discussion group known to the POP3 - service host. Nevertheless, it is desirable, usually for privacy - reasons, to implement private discussion groups as well. - - Support of this is consistent with the extensions outlined in this - - - -Rose [Page 9] - -RFC 1082 POP3 Extended Service November 1988 - - - memo. Once the AUTHORIZATION state has successfully concluded, the - POP3 server grants the user access to exactly those discussion groups - the POP3 service host permits the authenticated user to access. As a - "security" feature, discussion groups associated with unreadable - maildrops should not be listed in a positive response to the XTND - BBOARDS command. - - 2. Anonymous POP3 Users - - In order to minimize the authentication problem, a policy permitting - "anonymous" access to the world-readable maildrops for discussion - groups on the POP3 server may be implemented. - - Support of this is consistent with the extensions outlined in this - memo. The POP3 server can be modified to accept a USER command for a - well-known pseudonym (i.e., "anonymous") which is valid with any PASS - command. As a "security" feature, it is advisable to limit this kind - of access to only hosts at the local site, or to hosts named in an - access list. - -Experiences and Conclusions - - All of the facilities described in this memo and in [RFC1081] have - been implemented in MH #6.1. Initial experiences have been, on the - whole, very positive. - - After the first implementation, some performance tuning was required. - This consisted primarily of caching the datastructures which describe - discussion groups in the POP3 server. A second optimization - pertained to the client: the program most commonly used to read - BBoards in MH was modified to retrieve messages only when needed. - Two schemes are used: - - o If only the headers (and the first few lines of the body) of - the message are required (e.g., for a scan listing), then only - these are retrieved. The resulting output is then cached, on - a per-message basis. - - o If the entire message is required, then it is retrieved intact, - and cached locally. - - With these optimizations, response time is quite adequate when the - POP3 server and client are connected via a high-speed local area - network. In fact, the author uses this mechanism to access certain - private discussion groups over the Internet. In this case, response - is still good. When a 9.6Kbps modem is inserted in the path, - response went from good to almost tolerable (fortunately the author - only reads a few discussion groups in this fashion). - - - -Rose [Page 10] - -RFC 1082 POP3 Extended Service November 1988 - - - To conclude: the POP3 is a good thing, not only for personal mail but - for discussion group mail as well. - - -References - - [RFC1081] Rose, M., "Post Office Protocol - Verison 3 (POP3)", RFC - 1081, TWG, November 1988. - - [MRose85] Rose, M., and J. Romine, "The Rand MH Message Handling - System: User's Manual", University of California, Irvine, - November 1985. - - [RFC822] Crocker, D., "Standard for the Format of ARPA-Internet - Text Messages", RFC 822, University of Delaware, August - 1982. - - [RFC918] Reynolds, J., "Post Office Protocol", RFC 918, - USC/Information Sciences Institute, October 1984. - - [RFC937] Butler, M., J. Postel, D. Chase, J. Goldberger, and J. - Reynolds, "Post Office Protocol - Version 2", RFC 937, - USC/Information Sciences Institute, February 1985. - -Author's Address: - - - Marshall Rose - The Wollongong Group - 1129 San Antonio Rd. - Palo Alto, California 94303 - - Phone: (415) 962-7100 - - Email: MRose@TWG.COM - - - - - - - - - - - - - - - - -Rose [Page 11] - diff --git a/crypto/heimdal/appl/popper/pop_auth.c b/crypto/heimdal/appl/popper/pop_auth.c deleted file mode 100644 index 525beaa..0000000 --- a/crypto/heimdal/appl/popper/pop_auth.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the Kungliga Tekniska - * Högskolan and its contributors. - * - * 4. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -#include -RCSID("$Id: pop_auth.c,v 1.2 2000/04/12 15:37:45 assar Exp $"); - -#ifdef KRB4 - -enum { - NO_PROT = 1, - INT_PROT = 2, - PRIV_PROT = 4 -}; - -static int -auth_krb4(POP *p) -{ - int ret; - des_cblock key; - u_int32_t nonce, nonce_reply; - u_int32_t max_client_packet; - int protocols = NO_PROT | INT_PROT | PRIV_PROT; - char data[8]; - int len; - char *s; - char instance[INST_SZ]; - KTEXT_ST authent; - des_key_schedule schedule; - struct passwd *pw; - - /* S -> C: 32 bit nonce in MSB base64 */ - - des_new_random_key(&key); - nonce = (key[0] | (key[1] << 8) | (key[2] << 16) | (key[3] << 24) - | key[4] | (key[5] << 8) | (key[6] << 16) | (key[7] << 24)); - krb_put_int(nonce, data, 4, 8); - len = base64_encode(data, 4, &s); - - pop_msg(p, POP_CONTINUE, "%s", s); - free(s); - - /* C -> S: ticket and authenticator */ - - ret = sch_readline(p->input, &s); - if (ret <= 0 || strcmp (s, "*") == 0) - return pop_msg(p, POP_FAILURE, - "authentication aborted by client"); - len = strlen(s); - if (len > sizeof(authent.dat)) { - return pop_msg(p, POP_FAILURE, "data packet too long"); - } - - authent.length = base64_decode(s, authent.dat); - - k_getsockinst (0, instance, sizeof(instance)); - ret = krb_rd_req(&authent, "pop", instance, - p->in_addr.sin_addr.s_addr, - &p->kdata, NULL); - if (ret != 0) { - return pop_msg(p, POP_FAILURE, "rd_req: %s", - krb_get_err_text(ret)); - } - if (p->kdata.checksum != nonce) { - return pop_msg(p, POP_FAILURE, "data stream modified"); - } - - /* S -> C: nonce + 1 | bit | max segment */ - - krb_put_int(nonce + 1, data, 4, 7); - data[4] = protocols; - krb_put_int(1024, data + 5, 3, 3); /* XXX */ - des_key_sched(&p->kdata.session, schedule); - des_pcbc_encrypt((des_cblock*)data, - (des_cblock*)data, 8, - schedule, - &p->kdata.session, - DES_ENCRYPT); - len = base64_encode(data, 8, &s); - pop_msg(p, POP_CONTINUE, "%s", s); - - free(s); - - /* C -> S: nonce | bit | max segment | username */ - - ret = sch_readline(p->input, &s); - if (ret <= 0 || strcmp (s, "*") == 0) - return pop_msg(p, POP_FAILURE, - "authentication aborted"); - len = strlen(s); - if (len > sizeof(authent.dat)) { - return pop_msg(p, POP_FAILURE, "data packet too long"); - } - - authent.length = base64_decode(s, authent.dat); - - if (authent.length % 8 != 0) { - return pop_msg(p, POP_FAILURE, "reply is not a multiple of 8 bytes"); - } - - des_key_sched(&p->kdata.session, schedule); - des_pcbc_encrypt((des_cblock*)authent.dat, - (des_cblock*)authent.dat, - authent.length, - schedule, - &p->kdata.session, - DES_DECRYPT); - - krb_get_int(authent.dat, &nonce_reply, 4, 0); - if (nonce_reply != nonce) { - return pop_msg(p, POP_FAILURE, "data stream modified"); - } - protocols &= authent.dat[4]; - krb_get_int(authent.dat + 5, &max_client_packet, 3, 0); - if(authent.dat[authent.length - 1] != '\0') { - return pop_msg(p, POP_FAILURE, "bad format of username"); - } - strncpy (p->user, authent.dat + 8, sizeof(p->user)); - pw = k_getpwnam(p->user); - if (pw == NULL) { - return (pop_msg(p,POP_FAILURE, - "Password supplied for \"%s\" is incorrect.", - p->user)); - } - - if (kuserok(&p->kdata, p->user)) { - pop_log(p, POP_PRIORITY, - "%s: (%s.%s@%s) tried to retrieve mail for %s.", - p->client, p->kdata.pname, p->kdata.pinst, - p->kdata.prealm, p->user); - return(pop_msg(p,POP_FAILURE, - "Popping not authorized")); - } - pop_log(p, POP_INFO, "%s: %s.%s@%s -> %s", - p->ipaddr, - p->kdata.pname, p->kdata.pinst, p->kdata.prealm, - p->user); - ret = pop_login(p, pw); - if (protocols & PRIV_PROT) - ; - else if (protocols & INT_PROT) - ; - else - ; - - return ret; -} -#endif /* KRB4 */ - -#ifdef KRB5 -static int -auth_gssapi(POP *p) -{ - -} -#endif /* KRB5 */ - -/* - * auth: RFC1734 - */ - -static struct { - const char *name; - int (*func)(POP *); -} methods[] = { -#ifdef KRB4 - {"KERBEROS_V4", auth_krb4}, -#endif -#ifdef KRB5 - {"GSSAPI", auth_gssapi}, -#endif - {NULL, NULL} -}; - -int -pop_auth (POP *p) -{ - int i; - - for (i = 0; methods[i].name != NULL; ++i) - if (strcasecmp(p->pop_parm[1], methods[i].name) == 0) - return (*methods[i].func)(p); - return pop_msg(p, POP_FAILURE, - "Authentication method %s unknown", p->pop_parm[1]); -} diff --git a/crypto/heimdal/appl/popper/pop_debug.c b/crypto/heimdal/appl/popper/pop_debug.c deleted file mode 100644 index 9a29e4d..0000000 --- a/crypto/heimdal/appl/popper/pop_debug.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 1995 - 2002 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* Tiny program to help debug popper */ - -#include "popper.h" -RCSID("$Id: pop_debug.c,v 1.23 2002/05/02 16:27:16 joda Exp $"); - -static void -loop(int s) -{ - char cmd[1024]; - char buf[1024]; - fd_set fds; - while(1){ - FD_ZERO(&fds); - FD_SET(0, &fds); - FD_SET(s, &fds); - if(select(s+1, &fds, 0, 0, 0) < 0) - err(1, "select"); - if(FD_ISSET(0, &fds)){ - fgets(cmd, sizeof(cmd), stdin); - cmd[strlen(cmd) - 1] = '\0'; - strlcat (cmd, "\r\n", sizeof(cmd)); - write(s, cmd, strlen(cmd)); - } - if(FD_ISSET(s, &fds)){ - int n = read(s, buf, sizeof(buf)); - if(n == 0) - exit(0); - fwrite(buf, n, 1, stdout); - } - } -} - -static int -get_socket (const char *hostname, int port) -{ - int ret; - struct addrinfo *ai, *a; - struct addrinfo hints; - char portstr[NI_MAXSERV]; - - memset (&hints, 0, sizeof(hints)); - hints.ai_socktype = SOCK_STREAM; - snprintf (portstr, sizeof(portstr), "%d", ntohs(port)); - ret = getaddrinfo (hostname, portstr, &hints, &ai); - if (ret) - errx (1, "getaddrinfo %s: %s", hostname, gai_strerror (ret)); - - for (a = ai; a != NULL; a = a->ai_next) { - int s; - - s = socket (a->ai_family, a->ai_socktype, a->ai_protocol); - if (s < 0) - continue; - if (connect (s, a->ai_addr, a->ai_addrlen) < 0) { - close (s); - continue; - } - freeaddrinfo (ai); - return s; - } - err (1, "failed to connect to %s", hostname); -} - -#ifdef KRB4 -static int -doit_v4 (char *host, int port) -{ - KTEXT_ST ticket; - MSG_DAT msg_data; - CREDENTIALS cred; - des_key_schedule sched; - int ret; - int s = get_socket (host, port); - - ret = krb_sendauth(0, - s, - &ticket, - "pop", - host, - krb_realmofhost(host), - getpid(), - &msg_data, - &cred, - sched, - NULL, - NULL, - "KPOPV0.1"); - if(ret) { - warnx("krb_sendauth: %s", krb_get_err_text(ret)); - return 1; - } - loop(s); - return 0; -} -#endif - -#ifdef KRB5 -static int -doit_v5 (char *host, int port) -{ - krb5_error_code ret; - krb5_context context; - krb5_auth_context auth_context = NULL; - krb5_principal server; - int s = get_socket (host, port); - - ret = krb5_init_context (&context); - if (ret) - errx (1, "krb5_init_context failed: %d", ret); - - ret = krb5_sname_to_principal (context, - host, - "pop", - KRB5_NT_SRV_HST, - &server); - if (ret) { - warnx ("krb5_sname_to_principal: %s", - krb5_get_err_text (context, ret)); - return 1; - } - ret = krb5_sendauth (context, - &auth_context, - &s, - "KPOPV1.0", - NULL, - server, - 0, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL); - if (ret) { - warnx ("krb5_sendauth: %s", - krb5_get_err_text (context, ret)); - return 1; - } - loop (s); - return 0; -} -#endif - - -#ifdef KRB4 -static int use_v4 = -1; -#endif -#ifdef KRB5 -static int use_v5 = -1; -#endif -static char *port_str; -static int do_version; -static int do_help; - -struct getargs args[] = { -#ifdef KRB4 - { "krb4", '4', arg_flag, &use_v4, "Use Kerberos V4", - NULL }, -#endif -#ifdef KRB5 - { "krb5", '5', arg_flag, &use_v5, "Use Kerberos V5", - NULL }, -#endif - { "port", 'p', arg_string, &port_str, "Use this port", - "number-or-service" }, - { "version", 0, arg_flag, &do_version, "Print version", - NULL }, - { "help", 0, arg_flag, &do_help, NULL, - NULL } -}; - -static void -usage (int ret) -{ - arg_printusage (args, - sizeof(args) / sizeof(args[0]), - NULL, - "hostname"); - exit (ret); -} - -int -main(int argc, char **argv) -{ - int port = 0; - int ret = 1; - int optind = 0; - - setprogname(argv[0]); - - if (getarg (args, sizeof(args) / sizeof(args[0]), argc, argv, - &optind)) - usage (1); - - argc -= optind; - argv += optind; - - if (do_help) - usage (0); - - if (do_version) { - print_version (NULL); - return 0; - } - - if (argc < 1) - usage (1); - - if (port_str) { - struct servent *s = roken_getservbyname (port_str, "tcp"); - - if (s) - port = s->s_port; - else { - char *ptr; - - port = strtol (port_str, &ptr, 10); - if (port == 0 && ptr == port_str) - errx (1, "Bad port `%s'", port_str); - port = htons(port); - } - } - if (port == 0) { -#ifdef KRB5 - port = krb5_getportbyname (NULL, "kpop", "tcp", 1109); -#elif defined(KRB4) - port = k_getportbyname ("kpop", "tcp", 1109); -#else -#error must define KRB4 or KRB5 -#endif - } - -#if defined(KRB4) && defined(KRB5) - if(use_v4 == -1 && use_v5 == 1) - use_v4 = 0; - if(use_v5 == -1 && use_v4 == 1) - use_v5 = 0; -#endif - -#ifdef KRB5 - if (ret && use_v5) { - ret = doit_v5 (argv[0], port); - } -#endif -#ifdef KRB4 - if (ret && use_v4) { - ret = doit_v4 (argv[0], port); - } -#endif - return ret; -} diff --git a/crypto/heimdal/appl/popper/pop_dele.c b/crypto/heimdal/appl/popper/pop_dele.c deleted file mode 100644 index f1c2952..0000000 --- a/crypto/heimdal/appl/popper/pop_dele.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_dele.c,v 1.10 1999/08/12 11:35:26 joda Exp $"); - -/* - * dele: Delete a message from the POP maildrop - */ -int -pop_dele (POP *p) -{ - MsgInfoList * mp; /* Pointer to message info list */ - int msg_num; - - /* Convert the message number parameter to an integer */ - msg_num = atoi(p->pop_parm[1]); - - /* Is requested message out of range? */ - if ((msg_num < 1) || (msg_num > p->msg_count)) - return (pop_msg (p,POP_FAILURE,"Message %d does not exist.",msg_num)); - - /* Get a pointer to the message in the message list */ - mp = &(p->mlp[msg_num-1]); - - /* Is the message already flagged for deletion? */ - if (mp->flags & DEL_FLAG) - return (pop_msg (p,POP_FAILURE,"Message %d has already been deleted.", - msg_num)); - - /* Flag the message for deletion */ - mp->flags |= DEL_FLAG; - -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, - "Deleting message %u at offset %ld of length %ld\n", - mp->number, mp->offset, mp->length); -#endif /* DEBUG */ - - /* Update the messages_deleted and bytes_deleted counters */ - p->msgs_deleted++; - p->bytes_deleted += mp->length; - - /* Update the last-message-accessed number if it is lower than - the deleted message */ - if (p->last_msg < msg_num) p->last_msg = msg_num; - - return (pop_msg (p,POP_SUCCESS,"Message %d has been deleted.",msg_num)); -} - -#ifdef XDELE -/* delete a range of messages */ -int -pop_xdele(POP *p) -{ - MsgInfoList * mp; /* Pointer to message info list */ - - int msg_min, msg_max; - int i; - - - msg_min = atoi(p->pop_parm[1]); - if(p->parm_count == 1) - msg_max = msg_min; - else - msg_max = atoi(p->pop_parm[2]); - - if (msg_min < 1) - return (pop_msg (p,POP_FAILURE,"Message %d does not exist.",msg_min)); - if(msg_max > p->msg_count) - return (pop_msg (p,POP_FAILURE,"Message %d does not exist.",msg_max)); - for(i = msg_min; i <= msg_max; i++) { - - /* Get a pointer to the message in the message list */ - mp = &(p->mlp[i - 1]); - - /* Is the message already flagged for deletion? */ - if (mp->flags & DEL_FLAG) - continue; /* no point in returning error */ - /* Flag the message for deletion */ - mp->flags |= DEL_FLAG; - -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, - "Deleting message %u at offset %ld of length %ld\n", - mp->number, mp->offset, mp->length); -#endif /* DEBUG */ - - /* Update the messages_deleted and bytes_deleted counters */ - p->msgs_deleted++; - p->bytes_deleted += mp->length; - } - - /* Update the last-message-accessed number if it is lower than - the deleted message */ - if (p->last_msg < msg_max) p->last_msg = msg_max; - - return (pop_msg (p,POP_SUCCESS,"Messages %d-%d has been deleted.", - msg_min, msg_max)); - -} -#endif /* XDELE */ diff --git a/crypto/heimdal/appl/popper/pop_dropcopy.c b/crypto/heimdal/appl/popper/pop_dropcopy.c deleted file mode 100644 index 99ea49d..0000000 --- a/crypto/heimdal/appl/popper/pop_dropcopy.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_dropcopy.c,v 1.26 2002/07/04 14:10:11 joda Exp $"); - -/* - * Run as the user in `pwd' - */ - -int -changeuser(POP *p, struct passwd *pwd) -{ - if(setgid(pwd->pw_gid) < 0) { - pop_log (p, POP_PRIORITY, - "Unable to change to gid %u: %s", - (unsigned)pwd->pw_gid, - strerror(errno)); - return pop_msg (p, POP_FAILURE, - "Unable to change gid"); - } - if(setuid(pwd->pw_uid) < 0) { - pop_log (p, POP_PRIORITY, - "Unable to change to uid %u: %s", - (unsigned)pwd->pw_uid, - strerror(errno)); - return pop_msg (p, POP_FAILURE, - "Unable to change uid"); - } -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG,"uid = %u, gid = %u", - (unsigned)getuid(), - (unsigned)getgid()); -#endif /* DEBUG */ - return POP_SUCCESS; -} - -/* - * dropcopy: Make a temporary copy of the user's mail drop and - * save a stream pointer for it. - */ - -int -pop_dropcopy(POP *p, struct passwd *pwp) -{ - int mfd; /* File descriptor for - the user's maildrop */ - int dfd; /* File descriptor for - the SERVER maildrop */ - FILE *tf; /* The temp file */ - char template[POP_TMPSIZE]; /* Temp name holder */ - char buffer[BUFSIZ]; /* Read buffer */ - long offset; /* Old/New boundary */ - int nchar; /* Bytes written/read */ - int tf_fd; /* fd for temp file */ - int ret; - - /* Create a temporary maildrop into which to copy the updated maildrop */ - snprintf(p->temp_drop, sizeof(p->temp_drop), POP_DROP,p->user); - -#ifdef DEBUG - if(p->debug) - pop_log(p,POP_DEBUG,"Creating temporary maildrop '%s'", - p->temp_drop); -#endif /* DEBUG */ - - /* Here we work to make sure the user doesn't cause us to remove or - * write over existing files by limiting how much work we do while - * running as root. - */ - - strlcpy(template, POP_TMPDROP, sizeof(template)); - if ((tf_fd = mkstemp(template)) < 0 || - (tf = fdopen(tf_fd, "w+")) == NULL) { - pop_log(p,POP_PRIORITY, - "Unable to create temporary temporary maildrop '%s': %s",template, - strerror(errno)); - return pop_msg(p,POP_FAILURE, - "System error, can't create temporary file."); - } - - /* Now give this file to the user */ - chown(template, pwp->pw_uid, pwp->pw_gid); - chmod(template, 0600); - - /* Now link this file to the temporary maildrop. If this fails it - * is probably because the temporary maildrop already exists. If so, - * this is ok. We can just go on our way, because by the time we try - * to write into the file we will be running as the user. - */ - link(template,p->temp_drop); - fclose(tf); - unlink(template); - - ret = changeuser(p, pwp); - if (ret != POP_SUCCESS) - return ret; - - /* Open for append, this solves the crash recovery problem */ - if ((dfd = open(p->temp_drop,O_RDWR|O_APPEND|O_CREAT,0600)) == -1){ - pop_log(p,POP_PRIORITY, - "Unable to open temporary maildrop '%s': %s",p->temp_drop, - strerror(errno)); - return pop_msg(p,POP_FAILURE, - "System error, can't open temporary file, do you own it?"); - } - - /* Lock the temporary maildrop */ - if ( flock (dfd, (LOCK_EX | LOCK_NB)) == -1 ) - switch(errno) { - case EWOULDBLOCK: - return pop_msg(p,POP_FAILURE, - "%sMaildrop lock busy! Is another session active?", - (p->flags & POP_FLAG_CAPA) ? "[IN-USE] " : ""); - /* NOTREACHED */ - default: - return pop_msg(p,POP_FAILURE,"flock: '%s': %s", p->temp_drop, - strerror(errno)); - /* NOTREACHED */ - } - - /* May have grown or shrunk between open and lock! */ - offset = lseek(dfd,0, SEEK_END); - - /* Open the user's maildrop, If this fails, no harm in assuming empty */ - if ((mfd = open(p->drop_name,O_RDWR)) > 0) { - - /* Lock the maildrop */ - if (flock (mfd, LOCK_EX) == -1) { - close(mfd) ; - return pop_msg(p,POP_FAILURE, "flock: '%s': %s", p->temp_drop, - strerror(errno)); - } - - /* Copy the actual mail drop into the temporary mail drop */ - while ( (nchar=read(mfd,buffer,BUFSIZ)) > 0 ) - if ( nchar != write(dfd,buffer,nchar) ) { - nchar = -1 ; - break ; - } - - if ( nchar != 0 ) { - /* Error adding new mail. Truncate to original size, - and leave the maildrop as is. The user will not - see the new mail until the error goes away. - Should let them process the current backlog, in case - the error is a quota problem requiring deletions! */ - ftruncate(dfd,(int)offset) ; - } else { - /* Mail transferred! Zero the mail drop NOW, that we - do not have to do gymnastics to figure out what's new - and what is old later */ - ftruncate(mfd,0) ; - } - - /* Close the actual mail drop */ - close (mfd); - } - - /* Acquire a stream pointer for the temporary maildrop */ - if ( (p->drop = fdopen(dfd,"a+")) == NULL ) { - close(dfd) ; - return pop_msg(p,POP_FAILURE,"Cannot assign stream for %s", - p->temp_drop); - } - - rewind (p->drop); - - return(POP_SUCCESS); -} diff --git a/crypto/heimdal/appl/popper/pop_dropinfo.c b/crypto/heimdal/appl/popper/pop_dropinfo.c deleted file mode 100644 index 71922d2..0000000 --- a/crypto/heimdal/appl/popper/pop_dropinfo.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_dropinfo.c,v 1.24 1999/09/16 20:38:49 assar Exp $"); - -#if defined(UIDL) || defined(XOVER) - -/* - * Copy the string found after after : into a malloced buffer. Stop - * copying at end of string or end of line. End of line delimiter is - * not part of the resulting copy. - */ -static -char * -find_value_after_colon(char *p) -{ - char *t, *tmp; - - for (; *p != 0 && *p != ':'; p++) /* Find : */ - ; - - if (*p == 0) - goto error; - - p++; /* Skip over : */ - - for(; *p == ' ' || *p == '\t'; p++) /* Remove white space */ - ; - - for (t = p; *t != 0 && *t != '\n' && *t != '\r'; t++) /* Find end of str */ - ; - - tmp = t = malloc(t - p + 1); - if (tmp == 0) - goto error; - - for (; *p != 0 && *p != '\n' && *p != '\r'; p++, t++) /* Copy characters */ - *t = *p; - *t = 0; /* Terminate string */ - return tmp; - -error: - return "ErrorUIDL"; -} -#endif - -void -parse_header(MsgInfoList *mp, char *buffer) -{ -#if defined(UIDL) || defined(XOVER) - if (strncasecmp("Message-Id:",buffer, 11) == 0) { - if (mp->msg_id == NULL) - mp->msg_id = find_value_after_colon(buffer); - } -#ifdef UIDL - else if (strncasecmp(buffer, "X-UIDL:", 7) == 0) { - /* Courtesy to Qualcomm, there really is no such - thing as X-UIDL */ - mp->msg_id = find_value_after_colon(buffer); - } -#endif -#endif -#ifdef XOVER - else if (strncasecmp("Subject:", buffer, 8) == 0) { - if(mp->subject == NULL){ - char *p; - mp->subject = find_value_after_colon(buffer); - for(p = mp->subject; *p; p++) - if(*p == '\t') *p = ' '; - } - } - else if (strncasecmp("From:", buffer, 5) == 0) { - if(mp->from == NULL){ - char *p; - mp->from = find_value_after_colon(buffer); - for(p = mp->from; *p; p++) - if(*p == '\t') *p = ' '; - } - } - else if (strncasecmp("Date:", buffer, 5) == 0) { - if(mp->date == NULL){ - char *p; - mp->date = find_value_after_colon(buffer); - for(p = mp->date; *p; p++) - if(*p == '\t') *p = ' '; - } - } -#endif -} - -int -add_missing_headers(POP *p, MsgInfoList *mp) -{ -#if defined(UIDL) || defined(XOVER) - if (mp->msg_id == NULL) { - asprintf(&mp->msg_id, "no-message-id-%d", mp->number); - if(mp->msg_id == NULL) { - fclose (p->drop); - p->msg_count = 0; - return pop_msg (p,POP_FAILURE, - "Can't build message list for '%s': Out of memory", - p->user); - } - } -#endif -#ifdef XOVER - if (mp->subject == NULL) - mp->subject = ""; - if (mp->from == NULL) - mp->from = ""; - if (mp->date == NULL) - mp->date = ""; -#endif - return POP_SUCCESS; -} - -/* - * dropinfo: Extract information about the POP maildrop and store - * it for use by the other POP routines. - */ - -int -pop_dropinfo(POP *p) -{ - char buffer[BUFSIZ]; /* Read buffer */ - MsgInfoList * mp; /* Pointer to message - info list */ - int msg_num; /* Current message - counter */ - int nchar; /* Bytes written/read */ - int blank_line = 1; /* previous line was blank */ - int in_header = 0; /* if we are in a header block */ - - /* Initialize maildrop status variables in the POP parameter block */ - p->msg_count = 0; - p->msgs_deleted = 0; - p->last_msg = 0; - p->bytes_deleted = 0; - p->drop_size = 0; - - /* Allocate memory for message information structures */ - p->msg_count = ALLOC_MSGS; - p->mlp = (MsgInfoList *)calloc((unsigned)p->msg_count,sizeof(MsgInfoList)); - if (p->mlp == NULL){ - fclose (p->drop); - p->msg_count = 0; - return pop_msg (p,POP_FAILURE, - "Can't build message list for '%s': Out of memory", p->user); - } - - rewind (p->drop); - - /* Scan the file, loading the message information list with - information about each message */ - - for (msg_num = p->drop_size = 0, mp = p->mlp - 1; - fgets(buffer,MAXMSGLINELEN,p->drop);) { - - nchar = strlen(buffer); - - if (blank_line && strncmp(buffer,"From ",5) == 0) { - in_header = 1; - if (++msg_num > p->msg_count) { - p->mlp=(MsgInfoList *) realloc(p->mlp, - (p->msg_count+=ALLOC_MSGS)*sizeof(MsgInfoList)); - if (p->mlp == NULL){ - fclose (p->drop); - p->msg_count = 0; - return pop_msg (p,POP_FAILURE, - "Can't build message list for '%s': Out of memory", - p->user); - } - mp = p->mlp + msg_num - 2; - } - ++mp; - mp->number = msg_num; - mp->length = 0; - mp->lines = 0; - mp->offset = ftell(p->drop) - nchar; - mp->flags = 0; -#if defined(UIDL) || defined(XOVER) - mp->msg_id = 0; -#endif -#ifdef XOVER - mp->subject = 0; - mp->from = 0; - mp->date = 0; -#endif -#ifdef DEBUG - if(p->debug) - pop_log(p, POP_DEBUG, - "Msg %d at offset %ld being added to list", - mp->number, mp->offset); -#endif /* DEBUG */ - } else if(in_header) - parse_header(mp, buffer); - blank_line = (strncmp(buffer, "\n", nchar) == 0); - if(blank_line) { - int e; - in_header = 0; - e = add_missing_headers(p, mp); - if(e != POP_SUCCESS) - return e; - } - mp->length += nchar; - p->drop_size += nchar; - mp->lines++; - } - p->msg_count = msg_num; - -#ifdef DEBUG - if(p->debug && msg_num > 0) { - int i; - for (i = 0, mp = p->mlp; i < p->msg_count; i++, mp++) -#ifdef UIDL - pop_log(p,POP_DEBUG, - "Msg %d at offset %ld is %ld octets long and has %u lines and id %s.", - mp->number,mp->offset,mp->length,mp->lines, mp->msg_id); -#else - pop_log(p,POP_DEBUG, - "Msg %d at offset %d is %d octets long and has %u lines.", - mp->number,mp->offset,mp->length,mp->lines); -#endif - } -#endif /* DEBUG */ - - return(POP_SUCCESS); -} diff --git a/crypto/heimdal/appl/popper/pop_get_command.c b/crypto/heimdal/appl/popper/pop_get_command.c deleted file mode 100644 index f10c3fe..0000000 --- a/crypto/heimdal/appl/popper/pop_get_command.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_get_command.c,v 1.16 2002/07/04 14:09:47 joda Exp $"); - -/* - * get_command: Extract the command from an input line form a POP client - */ - -int pop_capa (POP *p); -static state_table states[] = { - {auth1, "user", 1, 1, pop_user, {auth1, auth2}}, - {auth2, "pass", 1, 99, pop_pass, {auth1, trans}}, -#ifdef RPOP - {auth2, "rpop", 1, 1, pop_rpop, {auth1, trans}}, -#endif /* RPOP */ - {auth1, "quit", 0, 0, pop_quit, {halt, halt}}, - {auth2, "quit", 0, 0, pop_quit, {halt, halt}}, -#ifdef CAPA - {auth1, "capa", 0, 0, pop_capa, {auth1, auth1}}, - {auth2, "capa", 0, 0, pop_capa, {auth2, auth2}}, - {trans, "capa", 0, 0, pop_capa, {trans, trans}}, -#endif - {trans, "stat", 0, 0, pop_stat, {trans, trans}}, - {trans, "list", 0, 1, pop_list, {trans, trans}}, - {trans, "retr", 1, 1, pop_send, {trans, trans}}, - {trans, "dele", 1, 1, pop_dele, {trans, trans}}, - {trans, "noop", 0, 0, NULL, {trans, trans}}, - {trans, "rset", 0, 0, pop_rset, {trans, trans}}, - {trans, "top", 2, 2, pop_send, {trans, trans}}, - {trans, "last", 0, 0, pop_last, {trans, trans}}, - {trans, "quit", 0, 0, pop_updt, {halt, halt}}, - {trans, "help", 0, 0, pop_help, {trans, trans}}, -#ifdef UIDL - {trans, "uidl", 0, 1, pop_uidl, {trans, trans}}, -#endif -#ifdef XOVER - {trans, "xover", 0, 0, pop_xover, {trans, trans}}, -#endif -#ifdef XDELE - {trans, "xdele", 1, 2, pop_xdele, {trans, trans}}, -#endif - {(state) 0, NULL, 0, 0, NULL, {halt, halt}}, -}; - -int -pop_capa (POP *p) -{ - /* Search for the POP command in the command/state table */ - pop_msg (p,POP_SUCCESS, "Capability list follows"); - fprintf(p->output, "USER\r\n"); - fprintf(p->output, "TOP\r\n"); - fprintf(p->output, "PIPELINING\r\n"); - fprintf(p->output, "EXPIRE NEVER\r\n"); - fprintf(p->output, "RESP-CODES\r\n"); -#ifdef UIDL - fprintf(p->output, "UIDL\r\n"); -#endif -#ifdef XOVER - fprintf(p->output, "XOVER\r\n"); -#endif -#ifdef XDELE - fprintf(p->output, "XDELE\r\n"); -#endif - if(p->CurrentState == trans) - fprintf(p->output, "IMPLEMENTATION %s-%s\r\n", PACKAGE, VERSION); - fprintf(p->output,".\r\n"); - fflush(p->output); - - p->flags |= POP_FLAG_CAPA; - - return(POP_SUCCESS); -} - -state_table * -pop_get_command(POP *p, char *mp) -{ - state_table * s; - char buf[MAXMSGLINELEN]; - - /* Save a copy of the original client line */ -#ifdef DEBUG - if(p->debug) strlcpy (buf, mp, sizeof(buf)); -#endif /* DEBUG */ - - /* Parse the message into the parameter array */ - if ((p->parm_count = pop_parse(p,mp)) < 0) return(NULL); - - /* Do not log cleartext passwords */ -#ifdef DEBUG - if(p->debug){ - if(strcmp(p->pop_command,"pass") == 0) - pop_log(p,POP_DEBUG,"Received: \"%s xxxxxxxxx\"",p->pop_command); - else { - /* Remove trailing */ - buf[strlen(buf)-2] = '\0'; - pop_log(p,POP_DEBUG,"Received: \"%s\"",buf); - } - } -#endif /* DEBUG */ - - /* Search for the POP command in the command/state table */ - for (s = states; s->command; s++) { - - /* Is this a valid command for the current operating state? */ - if (strcmp(s->command,p->pop_command) == 0 - && s->ValidCurrentState == p->CurrentState) { - - /* Were too few parameters passed to the command? */ - if (p->parm_count < s->min_parms) { - pop_msg(p,POP_FAILURE, - "Too few arguments for the %s command.", - p->pop_command); - return NULL; - } - - /* Were too many parameters passed to the command? */ - if (p->parm_count > s->max_parms) { - pop_msg(p,POP_FAILURE, - "Too many arguments for the %s command.", - p->pop_command); - return NULL; - } - - /* Return a pointer to the entry for this command in - the command/state table */ - return (s); - } - } - /* The client command was not located in the command/state table */ - pop_msg(p,POP_FAILURE, - "Unknown command: \"%s\".",p->pop_command); - return NULL; -} - -int -pop_help (POP *p) -{ - state_table *s; - - pop_msg(p, POP_SUCCESS, "help"); - - for (s = states; s->command; s++) { - fprintf (p->output, "%s\r\n", s->command); - } - fprintf (p->output, ".\r\n"); - fflush (p->output); - return POP_SUCCESS; -} diff --git a/crypto/heimdal/appl/popper/pop_init.c b/crypto/heimdal/appl/popper/pop_init.c deleted file mode 100644 index 7487ce6..0000000 --- a/crypto/heimdal/appl/popper/pop_init.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_init.c,v 1.58 2001/02/20 01:44:47 assar Exp $"); - - -#if defined(KRB4) || defined(KRB5) - -static int -pop_net_read(POP *p, int fd, void *buf, size_t len) -{ -#ifdef KRB5 - return krb5_net_read(p->context, &fd, buf, len); -#elif defined(KRB4) - return krb_net_read(fd, buf, len); -#endif -} -#endif - -static char *addr_log; - -static void -pop_write_addr(POP *p, struct sockaddr *addr) -{ - char ts[32]; - char as[128]; - time_t t; - FILE *f; - if(addr_log == NULL) - return; - t = time(NULL); - strftime(ts, sizeof(ts), "%Y%m%d%H%M%S", localtime(&t)); - if(inet_ntop (addr->sa_family, socket_get_address(addr), - as, sizeof(as)) == NULL) { - pop_log(p, POP_PRIORITY, "failed to print address"); - return; - } - - f = fopen(addr_log, "a"); - if(f == NULL) { - pop_log(p, POP_PRIORITY, "failed to open address log (%s)", addr_log); - return; - } - fprintf(f, "%s %s\n", as, ts); - fclose(f); -} - -#ifdef KRB4 -static int -krb4_authenticate (POP *p, int s, u_char *buf, struct sockaddr *addr) -{ - Key_schedule schedule; - KTEXT_ST ticket; - char instance[INST_SZ]; - char version[9]; - int auth; - - if (memcmp (buf, KRB_SENDAUTH_VERS, 4) != 0) - return -1; - if (pop_net_read (p, s, buf + 4, - KRB_SENDAUTH_VLEN - 4) != KRB_SENDAUTH_VLEN - 4) - return -1; - if (memcmp (buf, KRB_SENDAUTH_VERS, KRB_SENDAUTH_VLEN) != 0) - return -1; - - k_getsockinst (0, instance, sizeof(instance)); - auth = krb_recvauth(KOPT_IGNORE_PROTOCOL, - s, - &ticket, - "pop", - instance, - (struct sockaddr_in *)addr, - (struct sockaddr_in *) NULL, - &p->kdata, - "", - schedule, - version); - - if (auth != KSUCCESS) { - pop_msg(p, POP_FAILURE, "Kerberos authentication failure: %s", - krb_get_err_text(auth)); - pop_log(p, POP_PRIORITY, "%s: (%s.%s@%s) %s", p->client, - p->kdata.pname, p->kdata.pinst, p->kdata.prealm, - krb_get_err_text(auth)); - return -1; - } - -#ifdef DEBUG - pop_log(p, POP_DEBUG, "%s.%s@%s (%s): ok", p->kdata.pname, - p->kdata.pinst, p->kdata.prealm, p->ipaddr); -#endif /* DEBUG */ - return 0; -} -#endif /* KRB4 */ - -#ifdef KRB5 -static int -krb5_authenticate (POP *p, int s, u_char *buf, struct sockaddr *addr) -{ - krb5_error_code ret; - krb5_auth_context auth_context = NULL; - u_int32_t len; - krb5_ticket *ticket; - char *server; - - if (memcmp (buf, "\x00\x00\x00\x13", 4) != 0) - return -1; - len = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | (buf[3]); - - if (krb5_net_read(p->context, &s, buf, len) != len) - return -1; - if (len != sizeof(KRB5_SENDAUTH_VERSION) - || memcmp (buf, KRB5_SENDAUTH_VERSION, len) != 0) - return -1; - - ret = krb5_recvauth (p->context, - &auth_context, - &s, - "KPOPV1.0", - NULL, /* let rd_req figure out what server to use */ - KRB5_RECVAUTH_IGNORE_VERSION, - NULL, - &ticket); - if (ret) { - pop_log(p, POP_PRIORITY, "krb5_recvauth: %s", - krb5_get_err_text(p->context, ret)); - return -1; - } - - - ret = krb5_unparse_name(p->context, ticket->server, &server); - if(ret) { - pop_log(p, POP_PRIORITY, "krb5_unparse_name: %s", - krb5_get_err_text(p->context, ret)); - ret = -1; - goto out; - } - /* does this make sense? */ - if(strncmp(server, "pop/", 4) != 0) { - pop_log(p, POP_PRIORITY, - "Got ticket for service `%s'", server); - ret = -1; - goto out; - } else if(p->debug) - pop_log(p, POP_DEBUG, - "Accepted ticket for service `%s'", server); - free(server); - out: - krb5_auth_con_free (p->context, auth_context); - krb5_copy_principal (p->context, ticket->client, &p->principal); - krb5_free_ticket (p->context, ticket); - - return ret; -} -#endif - -static int -krb_authenticate(POP *p, struct sockaddr *addr) -{ -#if defined(KRB4) || defined(KRB5) - u_char buf[BUFSIZ]; - - if (pop_net_read (p, 0, buf, 4) != 4) { - pop_msg(p, POP_FAILURE, "Reading four bytes: %s", - strerror(errno)); - exit (1); - } -#ifdef KRB4 - if (krb4_authenticate (p, 0, buf, addr) == 0){ - pop_write_addr(p, addr); - p->version = 4; - return POP_SUCCESS; - } -#endif -#ifdef KRB5 - if (krb5_authenticate (p, 0, buf, addr) == 0){ - pop_write_addr(p, addr); - p->version = 5; - return POP_SUCCESS; - } -#endif - exit (1); - -#endif /* defined(KRB4) || defined(KRB5) */ - - return(POP_SUCCESS); -} - -static int -plain_authenticate (POP *p, struct sockaddr *addr) -{ - return(POP_SUCCESS); -} - -static int kerberos_flag; -static char *auth_str; -static int debug_flag; -static int interactive_flag; -static char *port_str; -static char *trace_file; -static int timeout; -static int help_flag; -static int version_flag; - -static struct getargs args[] = { -#if defined(KRB4) || defined(KRB5) - { "kerberos", 'k', arg_flag, &kerberos_flag, "use kerberos" }, -#endif - { "auth-mode", 'a', arg_string, &auth_str, "required authentication" }, - { "debug", 'd', arg_flag, &debug_flag }, - { "interactive", 'i', arg_flag, &interactive_flag, "create new socket" }, - { "port", 'p', arg_string, &port_str, "port to listen to", "port" }, - { "trace-file", 't', arg_string, &trace_file, "trace all command to file", "file" }, - { "timeout", 'T', arg_integer, &timeout, "timeout", "seconds" }, - { "address-log", 0, arg_string, &addr_log, "enable address log", "file" }, - { "help", 'h', arg_flag, &help_flag }, - { "version", 'v', arg_flag, &version_flag } -}; - -static int num_args = sizeof(args) / sizeof(args[0]); - -/* - * init: Start a Post Office Protocol session - */ - -static int -pop_getportbyname(POP *p, const char *service, - const char *proto, short def) -{ -#ifdef KRB5 - return krb5_getportbyname(p->context, service, proto, def); -#elif defined(KRB4) - return k_getportbyname(service, proto, htons(def)); -#else - return htons(default); -#endif -} - -int -pop_init(POP *p,int argcount,char **argmessage) -{ - struct sockaddr_storage cs_ss; - struct sockaddr *cs = (struct sockaddr *)&cs_ss; - socklen_t len; - char * trace_file_name = "/tmp/popper-trace"; - int portnum = 0; - int optind = 0; - int error; - - /* Initialize the POP parameter block */ - memset (p, 0, sizeof(POP)); - - setprogname(argmessage[0]); - - /* Save my name in a global variable */ - p->myname = (char*)getprogname(); - - /* Get the name of our host */ - gethostname(p->myhost,MaxHostNameLen); - -#ifdef KRB5 - { - krb5_error_code ret; - - ret = krb5_init_context (&p->context); - if (ret) - errx (1, "krb5_init_context failed: %d", ret); - - krb5_openlog(p->context, p->myname, &p->logf); - krb5_set_warn_dest(p->context, p->logf); - } -#else - /* Open the log file */ - roken_openlog(p->myname,POP_LOGOPTS,POP_FACILITY); -#endif - - p->auth_level = AUTH_NONE; - - if(getarg(args, num_args, argcount, argmessage, &optind)){ - arg_printusage(args, num_args, NULL, ""); - exit(1); - } - if(help_flag){ - arg_printusage(args, num_args, NULL, ""); - exit(0); - } - if(version_flag){ - print_version(NULL); - exit(0); - } - - argcount -= optind; - argmessage += optind; - - if (argcount != 0) { - arg_printusage(args, num_args, NULL, ""); - exit(1); - } - - if(auth_str){ - if (strcmp (auth_str, "none") == 0) - p->auth_level = AUTH_NONE; - else if(strcmp(auth_str, "otp") == 0) - p->auth_level = AUTH_OTP; - else - warnx ("bad value for -a: %s", optarg); - } - /* Debugging requested */ - p->debug = debug_flag; - - if(port_str) - portnum = htons(atoi(port_str)); - if(trace_file){ - p->debug++; - if ((p->trace = fopen(trace_file, "a+")) == NULL) { - pop_log(p, POP_PRIORITY, - "Unable to open trace file \"%s\", err = %d", - optarg,errno); - exit (1); - } - trace_file_name = trace_file; - } - -#if defined(KRB4) || defined(KRB5) - p->kerberosp = kerberos_flag; -#endif - - if(timeout) - pop_timeout = timeout; - - /* Fake inetd */ - if (interactive_flag) { - if (portnum == 0) - portnum = p->kerberosp ? - pop_getportbyname(p, "kpop", "tcp", 1109) : - pop_getportbyname(p, "pop", "tcp", 110); - mini_inetd (portnum); - } - - /* Get the address and socket of the client to whom I am speaking */ - len = sizeof(cs_ss); - if (getpeername(STDIN_FILENO, cs, &len) < 0) { - pop_log(p,POP_PRIORITY, - "Unable to obtain socket and address of client, err = %d",errno); - exit (1); - } - - /* Save the dotted decimal form of the client's IP address - in the POP parameter block */ - inet_ntop (cs->sa_family, socket_get_address (cs), - p->ipaddr, sizeof(p->ipaddr)); - - /* Save the client's port */ - p->ipport = ntohs(socket_get_port (cs)); - - /* Get the canonical name of the host to whom I am speaking */ - error = getnameinfo_verified (cs, len, p->client, sizeof(p->client), - NULL, 0, 0); - if (error) { - pop_log (p, POP_PRIORITY, - "getnameinfo: %s", gai_strerror (error)); - strlcpy (p->client, p->ipaddr, sizeof(p->client)); - } - - /* Create input file stream for TCP/IP communication */ - if ((p->input = fdopen(STDIN_FILENO,"r")) == NULL){ - pop_log(p,POP_PRIORITY, - "Unable to open communication stream for input, err = %d",errno); - exit (1); - } - - /* Create output file stream for TCP/IP communication */ - if ((p->output = fdopen(STDOUT_FILENO,"w")) == NULL){ - pop_log(p,POP_PRIORITY, - "Unable to open communication stream for output, err = %d",errno); - exit (1); - } - - pop_log(p,POP_PRIORITY, - "(v%s) Servicing request from \"%s\" at %s\n", - VERSION,p->client,p->ipaddr); - -#ifdef DEBUG - if (p->trace) - pop_log(p,POP_PRIORITY, - "Tracing session and debugging information in file \"%s\"", - trace_file_name); - else if (p->debug) - pop_log(p,POP_PRIORITY,"Debugging turned on"); -#endif /* DEBUG */ - - - return((p->kerberosp ? krb_authenticate : plain_authenticate)(p, cs)); -} diff --git a/crypto/heimdal/appl/popper/pop_last.c b/crypto/heimdal/appl/popper/pop_last.c deleted file mode 100644 index 36fdd0d..0000000 --- a/crypto/heimdal/appl/popper/pop_last.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_last.c,v 1.6 1996/10/28 16:25:28 assar Exp $"); - -/* - * last: Display the last message touched in a POP session - */ - -int -pop_last (POP *p) -{ - return (pop_msg(p,POP_SUCCESS,"%u is the last message seen.",p->last_msg)); -} diff --git a/crypto/heimdal/appl/popper/pop_list.c b/crypto/heimdal/appl/popper/pop_list.c deleted file mode 100644 index aa7666a..0000000 --- a/crypto/heimdal/appl/popper/pop_list.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_list.c,v 1.10 1998/04/23 17:37:47 joda Exp $"); - -/* - * list: List the contents of a POP maildrop - */ - -int -pop_list (POP *p) -{ - MsgInfoList * mp; /* Pointer to message info list */ - int i; - int msg_num; - - /* Was a message number provided? */ - if (p->parm_count > 0) { - msg_num = atoi(p->pop_parm[1]); - - /* Is requested message out of range? */ - if ((msg_num < 1) || (msg_num > p->msg_count)) - return (pop_msg (p,POP_FAILURE, - "Message %d does not exist.",msg_num)); - - /* Get a pointer to the message in the message list */ - mp = &p->mlp[msg_num-1]; - - /* Is the message already flagged for deletion? */ - if (mp->flags & DEL_FLAG) - return (pop_msg (p,POP_FAILURE, - "Message %d has been deleted.",msg_num)); - - /* Display message information */ - return (pop_msg(p,POP_SUCCESS,"%d %ld",msg_num,mp->length)); - } - - /* Display the entire list of messages */ - pop_msg(p,POP_SUCCESS, - "%d messages (%ld octets)", - p->msg_count-p->msgs_deleted, - p->drop_size-p->bytes_deleted); - - /* Loop through the message information list. Skip deleted messages */ - for (i = p->msg_count, mp = p->mlp; i > 0; i--, mp++) { - if (!(mp->flags & DEL_FLAG)) - fprintf(p->output,"%u %lu\r\n",mp->number,mp->length); - } - - /* "." signals the end of a multi-line transmission */ - fprintf(p->output,".\r\n"); - fflush(p->output); - - return(POP_SUCCESS); -} diff --git a/crypto/heimdal/appl/popper/pop_log.c b/crypto/heimdal/appl/popper/pop_log.c deleted file mode 100644 index deb9841..0000000 --- a/crypto/heimdal/appl/popper/pop_log.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_log.c,v 1.13 1997/10/14 21:59:07 joda Exp $"); - -/* - * log: Make a log entry - */ - -int -pop_log(POP *p, int stat, char *format, ...) -{ - char msgbuf[MAXLINELEN]; - va_list ap; - - va_start(ap, format); - vsnprintf(msgbuf, sizeof(msgbuf), format, ap); - - if (p->debug && p->trace) { - fprintf(p->trace,"%s\n",msgbuf); - fflush(p->trace); - } else { -#ifdef KRB5 - krb5_log(p->context, p->logf, stat, "%s", msgbuf); -#else - syslog (stat,"%s",msgbuf); -#endif - } - va_end(ap); - - return(stat); -} diff --git a/crypto/heimdal/appl/popper/pop_msg.c b/crypto/heimdal/appl/popper/pop_msg.c deleted file mode 100644 index 12887a4..0000000 --- a/crypto/heimdal/appl/popper/pop_msg.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_msg.c,v 1.16 1999/09/16 20:38:50 assar Exp $"); - -/* - * msg: Send a formatted line to the POP client - */ - -int -pop_msg(POP *p, int stat, char *format, ...) -{ - char *mp; - char message[MAXLINELEN]; - va_list ap; - - va_start(ap, format); - - /* Point to the message buffer */ - mp = message; - - /* Format the POP status code at the beginning of the message */ - snprintf (mp, sizeof(message), "%s ", - (stat == POP_SUCCESS) ? POP_OK : POP_ERR); - - /* Point past the POP status indicator in the message message */ - mp += strlen(mp); - - /* Append the message (formatted, if necessary) */ - if (format) - vsnprintf (mp, sizeof(message) - strlen(message), - format, ap); - - /* Log the message if debugging is turned on */ -#ifdef DEBUG - if (p->debug && stat == POP_SUCCESS) - pop_log(p,POP_DEBUG,"%s",message); -#endif /* DEBUG */ - - /* Log the message if a failure occurred */ - if (stat != POP_SUCCESS) - pop_log(p,POP_PRIORITY,"%s",message); - - /* Append the */ - strlcat(message, "\r\n", sizeof(message)); - - /* Send the message to the client */ - fputs(message, p->output); - fflush(p->output); - - va_end(ap); - return(stat); -} diff --git a/crypto/heimdal/appl/popper/pop_parse.c b/crypto/heimdal/appl/popper/pop_parse.c deleted file mode 100644 index 37aef36..0000000 --- a/crypto/heimdal/appl/popper/pop_parse.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_parse.c,v 1.9 1999/03/13 21:17:27 assar Exp $"); - -/* - * parse: Parse a raw input line from a POP client - * into null-delimited tokens - */ - -int -pop_parse(POP *p, char *buf) -{ - char * mp; - int i; - - /* Loop through the POP command array */ - for (mp = buf, i = 0; ; i++) { - - /* Skip leading spaces and tabs in the message */ - while (isspace((unsigned char)*mp))mp++; - - /* Are we at the end of the message? */ - if (*mp == 0) break; - - /* Have we already obtained the maximum allowable parameters? */ - if (i >= MAXPARMCOUNT) { - pop_msg(p,POP_FAILURE,"Too many arguments supplied."); - return(-1); - } - - /* Point to the start of the token */ - p->pop_parm[i] = mp; - - /* Search for the first space character (end of the token) */ - while (!isspace((unsigned char)*mp) && *mp) mp++; - - /* Delimit the token with a null */ - if (*mp) *mp++ = 0; - } - - /* Were any parameters passed at all? */ - if (i == 0) return (-1); - - /* Convert the first token (POP command) to lower case */ - strlwr(p->pop_command); - - /* Return the number of tokens extracted minus the command itself */ - return (i-1); - -} diff --git a/crypto/heimdal/appl/popper/pop_pass.c b/crypto/heimdal/appl/popper/pop_pass.c deleted file mode 100644 index cebd780..0000000 --- a/crypto/heimdal/appl/popper/pop_pass.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_pass.c,v 1.41 2000/04/12 15:37:46 assar Exp $"); - -#ifdef KRB4 -static int -krb4_verify_password (POP *p) -{ - int status; - char lrealm[REALM_SZ]; - char tkt[MaxPathLen]; - - status = krb_get_lrealm(lrealm,1); - if (status == KFAILURE) { - pop_log(p, POP_PRIORITY, "%s: (%s.%s@%s) %s", p->client, - p->kdata.pname, p->kdata.pinst, p->kdata.prealm, - krb_get_err_text(status)); - return 1; - } - snprintf(tkt, sizeof(tkt), "%s_popper.%u", TKT_ROOT, (unsigned)getpid()); - krb_set_tkt_string (tkt); - - status = krb_verify_user(p->user, "", lrealm, - p->pop_parm[1], KRB_VERIFY_SECURE, "pop"); - dest_tkt(); /* no point in keeping the tickets */ - return status; -} -#endif /* KRB4 */ - -#ifdef KRB5 -static int -krb5_verify_password (POP *p) -{ - krb5_preauthtype pre_auth_types[] = {KRB5_PADATA_ENC_TIMESTAMP}; - krb5_get_init_creds_opt get_options; - krb5_verify_init_creds_opt verify_options; - krb5_error_code ret; - krb5_principal client, server; - krb5_creds creds; - - krb5_get_init_creds_opt_init (&get_options); - - krb5_get_init_creds_opt_set_preauth_list (&get_options, - pre_auth_types, - 1); - - krb5_verify_init_creds_opt_init (&verify_options); - - ret = krb5_parse_name (p->context, p->user, &client); - if (ret) { - pop_log(p, POP_PRIORITY, "krb5_parse_name: %s", - krb5_get_err_text (p->context, ret)); - return 1; - } - - ret = krb5_get_init_creds_password (p->context, - &creds, - client, - p->pop_parm[1], - NULL, - NULL, - 0, - NULL, - &get_options); - if (ret) { - pop_log(p, POP_PRIORITY, - "krb5_get_init_creds_password: %s", - krb5_get_err_text (p->context, ret)); - return 1; - } - - ret = krb5_sname_to_principal (p->context, - p->myhost, - "pop", - KRB5_NT_SRV_HST, - &server); - if (ret) { - pop_log(p, POP_PRIORITY, - "krb5_get_init_creds_password: %s", - krb5_get_err_text (p->context, ret)); - return 1; - } - - ret = krb5_verify_init_creds (p->context, - &creds, - server, - NULL, - NULL, - &verify_options); - krb5_free_principal (p->context, client); - krb5_free_principal (p->context, server); - krb5_free_creds_contents (p->context, &creds); - return ret; -} -#endif -/* - * pass: Obtain the user password from a POP client - */ - -int -pop_pass (POP *p) -{ - struct passwd *pw; - int i; - struct stat st; - - /* Make one string of all these parameters */ - - for (i = 1; i < p->parm_count; ++i) - p->pop_parm[i][strlen(p->pop_parm[i])] = ' '; - - /* Look for the user in the password file */ - if ((pw = k_getpwnam(p->user)) == NULL) - return (pop_msg(p,POP_FAILURE, - "Password supplied for \"%s\" is incorrect.", - p->user)); - - if (p->kerberosp) { -#ifdef KRB4 - if (p->version == 4) { - if(kuserok (&p->kdata, p->user)) { - pop_log(p, POP_PRIORITY, - "%s: (%s.%s@%s) tried to retrieve mail for %s.", - p->client, p->kdata.pname, p->kdata.pinst, - p->kdata.prealm, p->user); - return(pop_msg(p,POP_FAILURE, - "Popping not authorized")); - } - pop_log(p, POP_INFO, "%s: %s.%s@%s -> %s", - p->ipaddr, - p->kdata.pname, p->kdata.pinst, p->kdata.prealm, - p->user); - } else -#endif /* KRB4 */ -#ifdef KRB5 - if (p->version == 5) { - char *name; - - if (!krb5_kuserok (p->context, p->principal, p->user)) { - pop_log (p, POP_PRIORITY, - "krb5 permission denied"); - return pop_msg(p, POP_FAILURE, - "Popping not authorized"); - } - if(krb5_unparse_name (p->context, p->principal, &name) == 0) { - pop_log(p, POP_INFO, "%s: %s -> %s", - p->ipaddr, name, p->user); - free (name); - } - } else { - pop_log (p, POP_PRIORITY, "kerberos authentication failed"); - return pop_msg (p, POP_FAILURE, - "kerberos authentication failed"); - } -#endif - { } - } else { - /* We don't accept connections from users with null passwords */ - if (pw->pw_passwd == NULL) - return (pop_msg(p, - POP_FAILURE, - "Password supplied for \"%s\" is incorrect.", - p->user)); - -#ifdef OTP - if (otp_verify_user (&p->otp_ctx, p->pop_parm[1]) == 0) - /* pass OK */; - else -#endif - /* Compare the supplied password with the password file entry */ - if (p->auth_level != AUTH_NONE) - return pop_msg(p, POP_FAILURE, - "Password supplied for \"%s\" is incorrect.", - p->user); - else if (!strcmp(crypt(p->pop_parm[1], pw->pw_passwd), pw->pw_passwd)) - /* pass OK */; - else { - int ret = -1; -#ifdef KRB4 - ret = krb4_verify_password (p); -#endif -#ifdef KRB5 - if(ret) - ret = krb5_verify_password (p); -#endif - if(ret) - return pop_msg(p, POP_FAILURE, - "Password incorrect"); - } - } - pop_log(p, POP_INFO, "login from %s as %s", - p->ipaddr, p->user); - - /* Build the name of the user's maildrop */ - snprintf(p->drop_name, sizeof(p->drop_name), "%s/%s", POP_MAILDIR, p->user); - - if(stat(p->drop_name, &st) < 0 || !S_ISDIR(st.st_mode)){ - /* Make a temporary copy of the user's maildrop */ - /* and set the group and user id */ - if (pop_dropcopy(p, pw) != POP_SUCCESS) return (POP_FAILURE); - - /* Get information about the maildrop */ - if (pop_dropinfo(p) != POP_SUCCESS) return(POP_FAILURE); - } else { - if(changeuser(p, pw) != POP_SUCCESS) return POP_FAILURE; - if(pop_maildir_info(p) != POP_SUCCESS) return POP_FAILURE; - } - /* Initialize the last-message-accessed number */ - p->last_msg = 0; - - /* Authorization completed successfully */ - return (pop_msg (p, POP_SUCCESS, - "%s has %d message(s) (%ld octets).", - p->user, p->msg_count, p->drop_size)); -} diff --git a/crypto/heimdal/appl/popper/pop_quit.c b/crypto/heimdal/appl/popper/pop_quit.c deleted file mode 100644 index 429b181..0000000 --- a/crypto/heimdal/appl/popper/pop_quit.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_quit.c,v 1.7 1996/11/19 22:48:30 assar Exp $"); - -/* - * quit: Terminate a POP session - */ - -int -pop_quit (POP *p) -{ - /* Release the message information list */ - if (p->mlp) free (p->mlp); - - return(POP_SUCCESS); -} diff --git a/crypto/heimdal/appl/popper/pop_rset.c b/crypto/heimdal/appl/popper/pop_rset.c deleted file mode 100644 index 6888ebf..0000000 --- a/crypto/heimdal/appl/popper/pop_rset.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_rset.c,v 1.9 1998/04/23 17:38:08 joda Exp $"); - -/* - * rset: Unflag all messages flagged for deletion in a POP maildrop - */ - -int -pop_rset (POP *p) -{ - MsgInfoList * mp; /* Pointer to the message info list */ - int i; - - /* Unmark all the messages */ - for (i = p->msg_count, mp = p->mlp; i > 0; i--, mp++) - mp->flags &= ~DEL_FLAG; - - /* Reset the messages-deleted and bytes-deleted counters */ - p->msgs_deleted = 0; - p->bytes_deleted = 0; - - /* Reset the last-message-access flag */ - p->last_msg = 0; - - return (pop_msg(p,POP_SUCCESS,"Maildrop has %u messages (%ld octets)", - p->msg_count, p->drop_size)); -} diff --git a/crypto/heimdal/appl/popper/pop_send.c b/crypto/heimdal/appl/popper/pop_send.c deleted file mode 100644 index 166b990..0000000 --- a/crypto/heimdal/appl/popper/pop_send.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_send.c,v 1.25 1999/03/05 14:14:28 joda Exp $"); - -/* - * sendline: Send a line of a multi-line response to a client. - */ -static int -pop_sendline(POP *p, char *buffer) -{ - char * bp; - - /* Byte stuff lines that begin with the termination octet */ - if (*buffer == POP_TERMINATE) - fputc(POP_TERMINATE,p->output); - - /* Look for a in the buffer */ - if ((bp = strchr(buffer, '\n'))) - *bp = 0; - - /* Send the line to the client */ - fputs(buffer,p->output); - -#ifdef DEBUG - if(p->debug) - pop_log(p,POP_DEBUG,"Sending line \"%s\"",buffer); -#endif /* DEBUG */ - - /* Put a if a newline was removed from the buffer */ - if (bp) - fputs ("\r\n",p->output); - return bp != NULL; -} - -/* - * send: Send the header and a specified number of lines - * from a mail message to a POP client. - */ - -int -pop_send(POP *p) -{ - MsgInfoList * mp; /* Pointer to message info list */ - int msg_num; - int msg_lines; - char buffer[MAXMSGLINELEN]; -#ifdef RETURN_PATH_HANDLING - char * return_path_adr; - char * return_path_end; - int return_path_sent; - int return_path_linlen; -#endif - int sent_nl = 0; - - /* Convert the first parameter into an integer */ - msg_num = atoi(p->pop_parm[1]); - - /* Is requested message out of range? */ - if ((msg_num < 1) || (msg_num > p->msg_count)) - return (pop_msg (p,POP_FAILURE,"Message %d does not exist.",msg_num)); - - /* Get a pointer to the message in the message list */ - mp = &p->mlp[msg_num-1]; - - /* Is the message flagged for deletion? */ - if (mp->flags & DEL_FLAG) - return (pop_msg (p,POP_FAILURE, - "Message %d has been deleted.",msg_num)); - - /* If this is a TOP command, get the number of lines to send */ - if (strcmp(p->pop_command, "top") == 0) { - /* Convert the second parameter into an integer */ - msg_lines = atoi(p->pop_parm[2]); - } - else { - /* Assume that a RETR (retrieve) command was issued */ - msg_lines = -1; - /* Flag the message as retreived */ - mp->flags |= RETR_FLAG; - } - - /* Display the number of bytes in the message */ - pop_msg(p, POP_SUCCESS, "%ld octets", mp->length); - - if(IS_MAILDIR(p)) { - int e = pop_maildir_open(p, mp); - if(e != POP_SUCCESS) - return e; - } - - /* Position to the start of the message */ - fseek(p->drop, mp->offset, 0); - - return_path_sent = 0; - - if(!IS_MAILDIR(p)) { - /* Skip the first line (the sendmail "From" line) */ - fgets (buffer,MAXMSGLINELEN,p->drop); - -#ifdef RETURN_PATH_HANDLING - if (strncmp(buffer,"From ",5) == 0) { - return_path_linlen = strlen(buffer); - for (return_path_adr = buffer+5; - (*return_path_adr == ' ' || *return_path_adr == '\t') && - return_path_adr < buffer + return_path_linlen; - return_path_adr++) - ; - if (return_path_adr < buffer + return_path_linlen) { - if ((return_path_end = strchr(return_path_adr, ' ')) != NULL) - *return_path_end = '\0'; - if (strlen(return_path_adr) != 0 && *return_path_adr != '\n') { - static char tmpbuf[MAXMSGLINELEN + 20]; - if (snprintf (tmpbuf, - sizeof(tmpbuf), - "Return-Path: %s\n", - return_path_adr) < MAXMSGLINELEN) { - pop_sendline (p,tmpbuf); - if (hangup) - return pop_msg (p, POP_FAILURE, - "SIGHUP or SIGPIPE flagged"); - return_path_sent++; - } - } - } - } -#endif - } - - /* Send the header of the message followed by a blank line */ - while (fgets(buffer,MAXMSGLINELEN,p->drop)) { -#ifdef RETURN_PATH_HANDLING - /* Don't send existing Return-Path-header if already sent own */ - if (!return_path_sent || strncasecmp(buffer, "Return-Path:", 12) != 0) -#endif - sent_nl = pop_sendline (p,buffer); - /* A single newline (blank line) signals the - end of the header. sendline() converts this to a NULL, - so that's what we look for. */ - if (*buffer == 0) break; - if (hangup) - return (pop_msg (p,POP_FAILURE,"SIGHUP or SIGPIPE flagged")); - } - /* Send the message body */ - { - int blank_line = 1; - while (fgets(buffer, MAXMSGLINELEN-1, p->drop)) { - /* Look for the start of the next message */ - if (!IS_MAILDIR(p) && blank_line && strncmp(buffer,"From ",5) == 0) - break; - blank_line = (strncmp(buffer, "\n", 1) == 0); - /* Decrement the lines sent (for a TOP command) */ - if (msg_lines >= 0 && msg_lines-- == 0) break; - sent_nl = pop_sendline(p,buffer); - if (hangup) - return (pop_msg (p,POP_FAILURE,"SIGHUP or SIGPIPE flagged")); - } - /* add missing newline at end */ - if(!sent_nl) - fputs("\r\n", p->output); - /* some pop-clients want a blank line at the end of the - message, we always add one here, but what the heck -- in - outer (white) space, no one can hear you scream */ - if(IS_MAILDIR(p)) - fputs("\r\n", p->output); - } - /* "." signals the end of a multi-line transmission */ - fputs(".\r\n",p->output); - fflush(p->output); - - return(POP_SUCCESS); -} diff --git a/crypto/heimdal/appl/popper/pop_stat.c b/crypto/heimdal/appl/popper/pop_stat.c deleted file mode 100644 index 9ab2800..0000000 --- a/crypto/heimdal/appl/popper/pop_stat.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_stat.c,v 1.7 1997/05/11 11:04:35 assar Exp $"); - -/* - * stat: Display the status of a POP maildrop to its client - */ - -int -pop_stat (POP *p) -{ -#ifdef DEBUG - if (p->debug) pop_log(p,POP_DEBUG,"%d message(s) (%ld octets).", - p->msg_count-p->msgs_deleted, - p->drop_size-p->bytes_deleted); -#endif /* DEBUG */ - return (pop_msg (p,POP_SUCCESS, - "%d %ld", - p->msg_count-p->msgs_deleted, - p->drop_size-p->bytes_deleted)); -} diff --git a/crypto/heimdal/appl/popper/pop_uidl.c b/crypto/heimdal/appl/popper/pop_uidl.c deleted file mode 100644 index 42dc12d..0000000 --- a/crypto/heimdal/appl/popper/pop_uidl.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -RCSID("$Id: pop_uidl.c,v 1.9 1999/12/02 16:58:33 joda Exp $"); - -#ifdef UIDL -/* - * uidl: Uidl the contents of a POP maildrop - */ - -int -pop_uidl (POP *p) -{ - MsgInfoList * mp; /* Pointer to message info list */ - int i; - int msg_num; - - /* Was a message number provided? */ - if (p->parm_count > 0) { - msg_num = atoi(p->pop_parm[1]); - - /* Is requested message out of range? */ - if ((msg_num < 1) || (msg_num > p->msg_count)) - return (pop_msg (p,POP_FAILURE, - "Message %d does not exist.",msg_num)); - - /* Get a pointer to the message in the message list */ - mp = &p->mlp[msg_num-1]; - - /* Is the message already flagged for deletion? */ - if (mp->flags & DEL_FLAG) - return (pop_msg (p,POP_FAILURE, - "Message %d has been deleted.",msg_num)); - - /* Display message information */ - return (pop_msg(p,POP_SUCCESS,"%u %s",msg_num,mp->msg_id)); - } - - /* Display the entire list of messages */ - pop_msg(p,POP_SUCCESS, - "%d messages (%ld octets)", - p->msg_count-p->msgs_deleted, - p->drop_size-p->bytes_deleted); - - /* Loop through the message information list. Skip deleted messages */ - for (i = p->msg_count, mp = p->mlp; i > 0; i--, mp++) { - if (!(mp->flags & DEL_FLAG)) - fprintf(p->output,"%u %s\r\n",mp->number,mp->msg_id); - } - - /* "." signals the end of a multi-line transmission */ - fprintf(p->output,".\r\n"); - fflush(p->output); - - return(POP_SUCCESS); -} -#endif /* UIDL */ diff --git a/crypto/heimdal/appl/popper/pop_updt.c b/crypto/heimdal/appl/popper/pop_updt.c deleted file mode 100644 index 0130132..0000000 --- a/crypto/heimdal/appl/popper/pop_updt.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_updt.c,v 1.19 1998/04/23 18:36:51 joda Exp $"); - -static char standard_error[] = - "Error error updating primary drop. Mailbox unchanged"; - -/* - * updt: Apply changes to a user's POP maildrop - */ - -int -pop_updt (POP *p) -{ - FILE * md; /* Stream pointer for - the user's maildrop */ - int mfd; /* File descriptor for - above */ - char buffer[BUFSIZ]; /* Read buffer */ - - MsgInfoList * mp; /* Pointer to message - info list */ - int msg_num; /* Current message - counter */ - int status_written; /* Status header field - written */ - int nchar; /* Bytes read/written */ - - long offset; /* New mail offset */ - - int blank_line; - -#ifdef DEBUG - if (p->debug) { - pop_log(p,POP_DEBUG,"Performing maildrop update..."); - pop_log(p,POP_DEBUG,"Checking to see if all messages were deleted"); - } -#endif /* DEBUG */ - - if(IS_MAILDIR(p)) - return pop_maildir_update(p); - - if (p->msgs_deleted == p->msg_count) { - /* Truncate before close, to avoid race condition, DO NOT UNLINK! - Another process may have opened, and not yet tried to lock */ - ftruncate ((int)fileno(p->drop),0); - fclose(p->drop) ; - return (POP_SUCCESS); - } - -#ifdef DEBUG - if (p->debug) - pop_log(p,POP_DEBUG,"Opening mail drop \"%s\"",p->drop_name); -#endif /* DEBUG */ - - /* Open the user's real maildrop */ - if ((mfd = open(p->drop_name,O_RDWR|O_CREAT,0600)) == -1 || - (md = fdopen(mfd,"r+")) == NULL) { - return pop_msg(p,POP_FAILURE,standard_error); - } - - /* Lock the user's real mail drop */ - if ( flock(mfd, LOCK_EX) == -1 ) { - fclose(md) ; - return pop_msg(p,POP_FAILURE, "flock: '%s': %s", p->temp_drop, - strerror(errno)); - } - - /* Go to the right places */ - offset = lseek((int)fileno(p->drop),0,SEEK_END) ; - - /* Append any messages that may have arrived during the session - to the temporary maildrop */ - while ((nchar=read(mfd,buffer,BUFSIZ)) > 0) - if ( nchar != write((int)fileno(p->drop),buffer,nchar) ) { - nchar = -1; - break ; - } - if ( nchar != 0 ) { - fclose(md) ; - ftruncate((int)fileno(p->drop),(int)offset) ; - fclose(p->drop) ; - return pop_msg(p,POP_FAILURE,standard_error); - } - - rewind(md); - lseek(mfd,0,SEEK_SET); - ftruncate(mfd,0) ; - - /* Synch stdio and the kernel for the POP drop */ - rewind(p->drop); - lseek((int)fileno(p->drop),0,SEEK_SET); - - /* Transfer messages not flagged for deletion from the temporary - maildrop to the new maildrop */ -#ifdef DEBUG - if (p->debug) - pop_log(p,POP_DEBUG,"Creating new maildrop \"%s\" from \"%s\"", - p->drop_name,p->temp_drop); -#endif /* DEBUG */ - - for (msg_num = 0; msg_num < p->msg_count; ++msg_num) { - - int doing_body; - - /* Get a pointer to the message information list */ - mp = &p->mlp[msg_num]; - - if (mp->flags & DEL_FLAG) { -#ifdef DEBUG - if(p->debug) - pop_log(p,POP_DEBUG, - "Message %d flagged for deletion.",mp->number); -#endif /* DEBUG */ - continue; - } - - fseek(p->drop,mp->offset,0); - -#ifdef DEBUG - if(p->debug) - pop_log(p,POP_DEBUG,"Copying message %d.",mp->number); -#endif /* DEBUG */ - blank_line = 1; - for(status_written = doing_body = 0 ; - fgets(buffer,MAXMSGLINELEN,p->drop);) { - - if (doing_body == 0) { /* Header */ - - /* Update the message status */ - if (strncasecmp(buffer,"Status:",7) == 0) { - if (mp->flags & RETR_FLAG) - fputs("Status: RO\n",md); - else - fputs(buffer, md); - status_written++; - continue; - } - /* A blank line signals the end of the header. */ - if (*buffer == '\n') { - doing_body = 1; - if (status_written == 0) { - if (mp->flags & RETR_FLAG) - fputs("Status: RO\n\n",md); - else - fputs("Status: U\n\n",md); - } - else fputs ("\n", md); - continue; - } - /* Save another header line */ - fputs (buffer, md); - } - else { /* Body */ - if (blank_line && strncmp(buffer,"From ",5) == 0) break; - fputs (buffer, md); - blank_line = (*buffer == '\n'); - } - } - } - - /* flush and check for errors now! The new mail will writen - without stdio, since we need not separate messages */ - - fflush(md) ; - if (ferror(md)) { - ftruncate(mfd,0) ; - fclose(md) ; - fclose(p->drop) ; - return pop_msg(p,POP_FAILURE,standard_error); - } - - /* Go to start of new mail if any */ - lseek((int)fileno(p->drop),offset,SEEK_SET); - - while((nchar=read((int)fileno(p->drop),buffer,BUFSIZ)) > 0) - if ( nchar != write(mfd,buffer,nchar) ) { - nchar = -1; - break ; - } - if ( nchar != 0 ) { - ftruncate(mfd,0) ; - fclose(md) ; - fclose(p->drop) ; - return pop_msg(p,POP_FAILURE,standard_error); - } - - /* Close the maildrop and empty temporary maildrop */ - fclose(md); - ftruncate((int)fileno(p->drop),0); - fclose(p->drop); - - return(pop_quit(p)); -} diff --git a/crypto/heimdal/appl/popper/pop_user.c b/crypto/heimdal/appl/popper/pop_user.c deleted file mode 100644 index be771e6..0000000 --- a/crypto/heimdal/appl/popper/pop_user.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: pop_user.c,v 1.15 1999/09/16 20:38:50 assar Exp $"); - -/* - * user: Prompt for the user name at the start of a POP session - */ - -int -pop_user (POP *p) -{ - char ss[256]; - - strlcpy(p->user, p->pop_parm[1], sizeof(p->user)); - -#ifdef OTP - if (otp_challenge (&p->otp_ctx, p->user, ss, sizeof(ss)) == 0) { - return pop_msg(p, POP_SUCCESS, "Password %s required for %s.", - ss, p->user); - } else -#endif - if (p->auth_level != AUTH_NONE) { - char *s = NULL; -#ifdef OTP - s = otp_error(&p->otp_ctx); -#endif - return pop_msg(p, POP_FAILURE, "Permission denied%s%s", - s ? ":" : "", s ? s : ""); - } else - return pop_msg(p, POP_SUCCESS, "Password required for %s.", p->user); -} diff --git a/crypto/heimdal/appl/popper/pop_xover.c b/crypto/heimdal/appl/popper/pop_xover.c deleted file mode 100644 index 94936f9..0000000 --- a/crypto/heimdal/appl/popper/pop_xover.c +++ /dev/null @@ -1,37 +0,0 @@ -#include -RCSID("$Id: pop_xover.c,v 1.4 1998/04/23 17:39:31 joda Exp $"); - -int -pop_xover (POP *p) -{ -#ifdef XOVER - MsgInfoList * mp; /* Pointer to message info list */ - int i; - - pop_msg(p,POP_SUCCESS, - "%d messages (%ld octets)", - p->msg_count-p->msgs_deleted, - p->drop_size-p->bytes_deleted); - - /* Loop through the message information list. Skip deleted messages */ - for (i = p->msg_count, mp = p->mlp; i > 0; i--, mp++) { - if (!(mp->flags & DEL_FLAG)) - fprintf(p->output,"%u\t%s\t%s\t%s\t%s\t%lu\t%u\r\n", - mp->number, - mp->subject, - mp->from, - mp->date, - mp->msg_id, - mp->length, - mp->lines); - } - - /* "." signals the end of a multi-line transmission */ - fprintf(p->output,".\r\n"); - fflush(p->output); - - return(POP_SUCCESS); -#else - return pop_msg(p, POP_FAILURE, "Command not implemented."); -#endif -} diff --git a/crypto/heimdal/appl/popper/popper.8 b/crypto/heimdal/appl/popper/popper.8 deleted file mode 100644 index 1493fd7..0000000 --- a/crypto/heimdal/appl/popper/popper.8 +++ /dev/null @@ -1,90 +0,0 @@ -.\" $Id: popper.8,v 1.7 2002/08/20 16:37:05 joda Exp $ -.\" -.Dd August 13, 2001 -.Dt POPPER 8 -.Os HEIMDAL -.Sh NAME -.Nm popper -.Nd -POP3 server -.Sh SYNOPSIS -.Nm -.Op Fl k -.Op Fl a Ar none Ns \*(Ba Ns otp -.Op Fl t Ar file -.Op Fl T Ar seconds -.Op Fl d -.Op Fl i -.Op Fl p Ar port -.Op Fl -address-log= Ns Pa file -.Sh DESCRIPTION -.Nm -serves mail via the Post Office Protocol. Supported options include: -.Bl -tag -width Ds -.It Xo -.Fl a Ar none Ns \*(Ba Ns otp , -.Fl -auth-mode= Ns Ar none Ns \*(Ba Ns otp -.Xc -tells -.Nm -what authentication modes are acceptable, passing -.Ar otp -disables clear text passwords. This has only effect when not using -Kerberos authentication. -.It Xo -.Fl -address-log= Ns Pa file -.Xc -logs the addresses of all clients to the specified file -.It Xo -.Fl d , -.Fl -debug -.Xc -enables more verbose log messages -.It Xo -.Fl i , -.Fl -interactive -.Xc -when not started by inetd, this flag tells -.Nm -that it has to create a socket by itself -.It Xo -.Fl k , -.Fl -kerberos -.Xc -tells -.Nm -to use the Kerberos for authentication. -.It Xo -.Fl p Ar port , -.Fl -port= Ns Ar port -.Xc -port to listen to, in combination with -.Fl i -.It Xo -.Fl t Ar file , -.Fl -trace-file= Ns Ar file -.Xc -trace all command to file -.It Xo -.Fl T Ar seconds , -.Fl -timeout= Ns Ar seconds -.Xc -set timeout to something other than the default of 120 seconds -.El -.\".Sh ENVIRONMENT -.\".Sh FILES -.\".Sh EXAMPLES -.\".Sh DIAGNOSTICS -.Sh SEE ALSO -.Xr push 8 , -.Xr movemail 8 -.Sh STANDARDS -RFC1939 (Post Office Protocol - Version 3) -.\" RFC2449 (POP3 Extension Mechanism) -.\".Sh HISTORY -.Sh AUTHORS -The server was initially developed at the University of California, -Berkeley. -.Pp -Many changes has been made as part of the KTH Kerberos distributions. -.\".Sh BUGS diff --git a/crypto/heimdal/appl/popper/popper.README.release b/crypto/heimdal/appl/popper/popper.README.release deleted file mode 100644 index c0b313e..0000000 --- a/crypto/heimdal/appl/popper/popper.README.release +++ /dev/null @@ -1,45 +0,0 @@ -Release Notes: - -popper-1.831beta is no longer beta 30 July 91 - Removed popper-1.7.tar.Z - -popper-1.831beta.tar.Z 03 April 91 - Changed mkstemp to mktemp for Ultrix. Sigh. - -popper-1.83beta.tar.Z 02 April 91 - - This version makes certain that while running as root we do nothing - at all destructive. - -popper-1.82beta.tar.Z 27 March 91 - - This version fixes problems on Encore MultiMax and some Sun releases - which wouldn't allow a user to ftruncate() a file from an open - file descripter unless the user owns the file. Now the user - owns the /usr/spool/mail/.userid.pop file. Thanks to Ben Levy - of FTP Software and Henry Holtzman of Apple. - -popper-1.81beta.tar.Z 20 March 91 - - This version of popper is supposed to fix three problems reported - with various versions of popper (all called 1.7 or 1.7something). - - 1) Dropped network connections meant lost mail files. Some 1.7 - versions also risked corrupting mail files. - - 2) Some versions of 1.7 created temporary drop files with world - read and write permissions. - - 3) Some versions of 1.7 were not careful about opening the temporary - drop file. - -popper-1.7.tar.Z 09 September 90 (updated 20 March 91) - - This version will exhibit the first problem listed above if it is - compiled with -DDEBUG and run without the "-d" (debug) flag. - - If it is compiled without -DDEBUG it will exhibit only the second - and third bug listed above. - -Cliff Frost poptest@nettlesome.berkeley.edu -UC Berkeley diff --git a/crypto/heimdal/appl/popper/popper.c b/crypto/heimdal/appl/popper/popper.c deleted file mode 100644 index 6aee294..0000000 --- a/crypto/heimdal/appl/popper/popper.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - */ - -#include -RCSID("$Id: popper.c,v 1.16 2002/07/04 14:09:25 joda Exp $"); - -int hangup = FALSE ; - -static RETSIGTYPE -catchSIGHUP(int sig) -{ - hangup = TRUE ; - - /* This should not be a problem on BSD systems */ - signal(SIGHUP, catchSIGHUP); - signal(SIGPIPE, catchSIGHUP); - SIGRETURN(0); -} - -int pop_timeout = POP_TIMEOUT; - -jmp_buf env; - -static RETSIGTYPE -ring(int sig) -{ - longjmp(env,1); -} - -/* - * fgets, but with a timeout - */ -static char * -tgets(char *str, int size, FILE *fp, int timeout) -{ - signal(SIGALRM, ring); - alarm(timeout); - if (setjmp(env)) - str = NULL; - else - str = fgets(str,size,fp); - alarm(0); - signal(SIGALRM,SIG_DFL); - return(str); -} - -/* - * popper: Handle a Post Office Protocol version 3 session - */ -int -main (int argc, char **argv) -{ - POP p; - state_table * s; - char message[MAXLINELEN]; - - signal(SIGHUP, catchSIGHUP); - signal(SIGPIPE, catchSIGHUP); - - /* Start things rolling */ - pop_init(&p,argc,argv); - - /* Tell the user that we are listenting */ - pop_msg(&p,POP_SUCCESS, "POP3 server ready"); - - /* State loop. The POP server is always in a particular state in - which a specific suite of commands can be executed. The following - loop reads a line from the client, gets the command, and processes - it in the current context (if allowed) or rejects it. This continues - until the client quits or an error occurs. */ - - for (p.CurrentState=auth1;p.CurrentState!=halt&&p.CurrentState!=error;) { - if (hangup) { - pop_msg(&p, POP_FAILURE, "POP hangup: %s", p.myhost); - if (p.CurrentState > auth2 && !pop_updt(&p)) - pop_msg(&p, POP_FAILURE, - "POP mailbox update failed: %s", p.myhost); - p.CurrentState = error; - } else if (tgets(message, MAXLINELEN, p.input, pop_timeout) == NULL) { - pop_msg(&p, POP_FAILURE, "POP timeout: %s", p.myhost); - if (p.CurrentState > auth2 && !pop_updt(&p)) - pop_msg(&p,POP_FAILURE, - "POP mailbox update failed: %s", p.myhost); - p.CurrentState = error; - } - else { - /* Search for the command in the command/state table */ - if ((s = pop_get_command(&p,message)) == NULL) continue; - - /* Call the function associated with this command in - the current state */ - if (s->function) p.CurrentState = s->result[(*s->function)(&p)]; - - /* Otherwise assume NOOP and send an OK message to the client */ - else { - p.CurrentState = s->success_state; - pop_msg(&p,POP_SUCCESS,NULL); - } - } - } - - /* Say goodbye to the client */ - pop_msg(&p,POP_SUCCESS,"Pop server at %s signing off.",p.myhost); - - /* Log the end of activity */ - pop_log(&p,POP_PRIORITY, - "(v%s) Ending request from \"%s\" at %s\n",VERSION,p.client,p.ipaddr); - - /* Stop logging */ - closelog(); - - return(0); -} diff --git a/crypto/heimdal/appl/popper/popper.h b/crypto/heimdal/appl/popper/popper.h deleted file mode 100644 index 7eac257..0000000 --- a/crypto/heimdal/appl/popper/popper.h +++ /dev/null @@ -1,352 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - * - * static char copyright[] = "Copyright (c) 1990 Regents of the University of California.\nAll rights reserved.\n"; - * static char SccsId[] = "@(#)@(#)popper.h 2.2 2.2 4/2/91"; - * - */ - -/* $Id: popper.h,v 1.51 2002/07/04 13:56:12 joda Exp $ */ - -/* - * Header file for the POP programs - */ - -#ifdef HAVE_CONFIG_H -#include -#define UIDL -#define XOVER -#define XDELE -#define DEBUG -#define RETURN_PATH_HANDLING -#endif - -/* Common include files */ - -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef HAVE_FCNTL_H -#include -#endif -#ifdef HAVE_PWD_H -#include -#endif -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_IO_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_SYS_STAT_H -#include -#endif -#ifdef HAVE_SYS_FILE_H -#include -#endif -#ifdef TIME_WITH_SYS_TIME -#include -#include -#elif defined(HAVE_SYS_TIME_H) -#include -#else -#include -#endif -#ifdef HAVE_SYS_RESOURCE_H -#include -#endif -#ifdef HAVE_SYS_WAIT_H -#include -#endif -#ifdef HAVE_SYS_SOCKET_H -#include -#endif -#ifdef HAVE_NETINET_IN_H -#include -#endif -#ifdef HAVE_NETINET_IN6_H -#include -#endif -#ifdef HAVE_NETINET6_IN6_H -#include -#endif - -#ifdef HAVE_NETDB_H -#include -#endif -#ifdef HAVE_ARPA_INET_H -#ifdef _AIX -struct sockaddr_dl; /* AIX fun */ -struct ether_addr; -#endif -#include -#endif -#ifdef HAVE_SYSLOG_H -#include -#endif -#ifdef HAVE_SYS_SELECT_H -#include -#endif -#ifdef HAVE_SYS_PARAM_H -#include -#endif -#include "version.h" - -#ifdef SOCKS -#include -#endif - -#include -#include -#include - -#ifdef KRB4 -#include -#include -#endif -#ifdef KRB5 -#include -#endif - -#define MAXUSERNAMELEN 65 -#define MAXLINELEN 1024 -#define MAXMSGLINELEN 1024 -#define MAXCMDLEN 4 -#define MAXPARMCOUNT 10 -#define MAXPARMLEN 10 -#define ALLOC_MSGS 20 -#define MAIL_COMMAND "/usr/lib/sendmail" - -#define POP_FACILITY LOG_LOCAL0 -#define POP_PRIORITY LOG_NOTICE -#define POP_DEBUG LOG_DEBUG -#define POP_INFO LOG_INFO -#define POP_LOGOPTS 0 - -#ifdef HAVE_PATHS_H -#include -#endif -#ifdef HAVE_MAILLOCK_H -#include -#endif - -#ifdef OTP -#include -#endif - -#if defined(KRB4_MAILDIR) -#define POP_MAILDIR KRB4_MAILDIR -#elif defined(_PATH_MAILDIR) -#define POP_MAILDIR _PATH_MAILDIR -#elif defined(MAILDIR) -#define POP_MAILDIR MAILDIR -#else -#define POP_MAILDIR "/usr/spool/mail" -#endif - -#define POP_DROP POP_MAILDIR "/.%s.pop" - /* POP_TMPSIZE needs to be big enough to hold the string - * defined by POP_TMPDROP. POP_DROP and POP_TMPDROP - * must be in the same filesystem. - */ -#define POP_TMPDROP POP_MAILDIR "/tmpXXXXXX" -#define POP_TMPSIZE 256 -#define POP_TMPXMIT "/tmp/xmitXXXXXX" -#define POP_OK "+OK" -#define POP_ERR "-ERR" -#define POP_SUCCESS 1 -#define POP_FAILURE 0 -#define POP_TERMINATE '.' -#define POP_TIMEOUT 120 /* timeout connection after this many secs */ - -extern int pop_timeout; - -extern int hangup; - -#define AUTH_NONE 0 -#define AUTH_OTP 1 - -#define pop_command pop_parm[0] /* POP command is first token */ -#define pop_subcommand pop_parm[1] /* POP XTND subcommand is the - second token */ - -typedef enum { /* POP processing states */ - auth1, /* Authorization: waiting for - USER command */ - auth2, /* Authorization: waiting for - PASS command */ - trans, /* Transaction */ - update, /* Update: session ended, - process maildrop changes */ - halt, /* (Halt): stop processing - and exit */ - error /* (Error): something really - bad happened */ -} state; - - -#define DEL_FLAG 1 -#define RETR_FLAG 2 -#define NEW_FLAG 4 - -typedef struct { /* Message information */ - int number; /* Message number relative to - the beginning of list */ - long length; /* Length of message in - bytes */ - int lines; /* Number of (null-terminated) lines in the message */ - long offset; /* Offset from beginning of - file */ - unsigned flags; - -#if defined(UIDL) || defined(XOVER) - char *msg_id; /* The POP UIDL uniqueifier */ -#endif -#ifdef XOVER - char *subject; - char *from; - char *date; -#endif - char *name; -} MsgInfoList; - -#define IS_MAILDIR(P) ((P)->temp_drop[0] == '\0') - -typedef struct { /* POP parameter block */ - int debug; /* Debugging requested */ - char * myname; /* The name of this POP - daemon program */ - char myhost[MaxHostNameLen]; /* The name of our host - computer */ - char client[MaxHostNameLen]; /* Canonical name of client - computer */ - char ipaddr[MaxHostNameLen]; /* Dotted-notation format of - client IP address */ - unsigned short ipport; /* Client port for privileged - operations */ - char user[MAXUSERNAMELEN]; /* Name of the POP user */ - state CurrentState; /* The current POP operational state */ - MsgInfoList * mlp; /* Message information list */ - int msg_count; /* Number of messages in - the maildrop */ - int msgs_deleted; /* Number of messages flagged - for deletion */ - int last_msg; /* Last message touched by - the user */ - long bytes_deleted; /* Number of maildrop bytes - flagged for deletion */ - char drop_name[MAXPATHLEN]; /* The name of the user's - maildrop */ - char temp_drop[MAXPATHLEN]; /* The name of the user's - temporary maildrop */ - long drop_size; /* Size of the maildrop in - bytes */ - FILE * drop; /* (Temporary) mail drop */ - FILE * input; /* Input TCP/IP communication - stream */ - FILE * output; /* Output TCP/IP communication stream */ - FILE * trace; /* Debugging trace file */ - char * pop_parm[MAXPARMCOUNT]; /* Parse POP parameter list */ - int parm_count; /* Number of parameters in - parsed list */ - int kerberosp; /* Using KPOP? */ -#ifdef KRB4 - AUTH_DAT kdata; -#endif -#ifdef KRB5 - krb5_context context; - krb5_principal principal; /* principal auth as */ - krb5_log_facility* logf; -#endif - int version; /* 4 or 5? */ - int auth_level; /* Dont allow cleartext */ -#ifdef OTP - OtpContext otp_ctx; /* OTP context */ -#endif - unsigned int flags; -#define POP_FLAG_CAPA 1 -} POP; - -typedef struct { /* State information for - each POP command */ - state ValidCurrentState; /* The operating state of - the command */ - char * command; /* The POP command */ - int min_parms; /* Minimum number of parms - for the command */ - int max_parms; /* Maximum number of parms - for the command */ - int (*function) (); /* The function that process - the command */ - state result[2]; /* The resulting state after - command processing */ -#define success_state result[0] /* State when a command - succeeds */ -} state_table; - -typedef struct { /* Table of extensions */ - char * subcommand; /* The POP XTND subcommand */ - int min_parms; /* Minimum number of parms for - the subcommand */ - int max_parms; /* Maximum number of parms for - the subcommand */ - int (*function) (); /* The function that processes - the subcommand */ -} xtnd_table; - -int pop_dele(POP *p); -int pop_dropcopy(POP *p, struct passwd *pwp); -int pop_dropinfo(POP *p); -int pop_init(POP *p,int argcount,char **argmessage); -int pop_last(POP *p); -int pop_list(POP *p); -int pop_parse(POP *p, char *buf); -int pop_pass(POP *p); -int pop_quit(POP *p); -int pop_rset(POP *p); -int pop_send(POP *p); -int pop_stat(POP *p); -int pop_updt(POP *p); -int pop_user(POP *p); -#ifdef UIDL -int pop_uidl(POP *p); -#endif -#ifdef XOVER -int pop_xover(POP *p); -#endif -#ifdef XDELE -int pop_xdele(POP *p); -#endif -int pop_help(POP *p); -state_table *pop_get_command(POP *p, char *mp); -void pop_lower(char *buf); - -int pop_log(POP *p, int stat, char *format, ...) -#ifdef __GNUC__ -__attribute__ ((format (printf, 3, 4))) -#endif -; - -int pop_msg(POP *p, int stat, char *format, ...) -#ifdef __GNUC__ -__attribute__ ((format (printf, 3, 4))) -#endif -; - -int pop_maildir_info (POP*); -int pop_maildir_open (POP*, MsgInfoList*); -int pop_maildir_update (POP*); - -int changeuser(POP*, struct passwd*); -void parse_header(MsgInfoList*, char*); -int add_missing_headers(POP*, MsgInfoList*); diff --git a/crypto/heimdal/appl/popper/version.h b/crypto/heimdal/appl/popper/version.h deleted file mode 100644 index 1b5d135..0000000 --- a/crypto/heimdal/appl/popper/version.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 1989 Regents of the University of California. - * All rights reserved. The Berkeley software License Agreement - * specifies the terms and conditions for redistribution. - * - * static char copyright[] = "Copyright (c) 1990 Regents of the University of California.\nAll rights reserved.\n"; - * static char SccsId[] = "@(#)@(#)version.h 2.6 2.6 4/3/91"; - * - */ - -/* $Id: version.h,v 1.5 1997/08/08 22:50:13 assar Exp $ */ - -/* - * Current version of this POP implementation - */ - -#if 0 -#define VERSION krb4_version -#endif diff --git a/crypto/heimdal/appl/xnlock/ChangeLog b/crypto/heimdal/appl/xnlock/ChangeLog deleted file mode 100644 index 13863a3..0000000 --- a/crypto/heimdal/appl/xnlock/ChangeLog +++ /dev/null @@ -1,76 +0,0 @@ -2002-08-23 Assar Westerlund - - * xnlock.c: add --version as a special case - -2001-06-24 Assar Westerlund - - * xnlock.c (verify_krb5): remove unused variable - -2001-03-15 Johan Danielsson - - * xnlock.c: don't explicitly set the krb4 ticket file - -2000-12-31 Assar Westerlund - - * xnlock.c (main): handle krb5_init_context failure consistently - -2000-07-17 Johan Danielsson - - * Makefile.am: use conditional for X - -2000-04-09 Assar Westerlund - - * xnlock.c (verfiy_krb5): get the v4-realm from the v5-ticket and - not from the default one. - * xnlock.c (verify_krb5): add obtainting of v4 tickets. - -1999-11-17 Assar Westerlund - - * Makefile.am: only build when we have X11. From: Simon Josefsson - - -Thu Mar 18 11:21:44 1999 Johan Danielsson - - * Makefile.am: include Makefile.am.common - -Wed Mar 17 23:35:51 1999 Assar Westerlund - - * xnlock.c (verify): use KRB_VERIFY_SECURE instead of 1 - -Tue Mar 16 22:29:14 1999 Assar Westerlund - - * xnlock.c: krb_verify_user_multiple -> krb_verify_user - -Thu Mar 11 14:59:20 1999 Johan Danielsson - - * xnlock.c: add some if-braces to keep gcc happy - -Sun Nov 22 10:36:45 1998 Assar Westerlund - - * Makefile.in (WFLAGS): set - -Wed Jul 8 01:37:37 1998 Assar Westerlund - - * xnlock.c (main): create place-holder ticket file with - open(O_EXCL | O_CREAT) instead of creat - -Sat Mar 28 12:53:46 1998 Assar Westerlund - - * Makefile.in (install, uninstall): transform the man page - -Tue Mar 24 05:20:34 1998 Assar Westerlund - - * xnlock.c: remove redundant preprocessor stuff - -Sat Mar 21 14:36:21 1998 Assar Westerlund - - * xnlock.c (init_words): recognize both `-p' and `-prog' - -Sat Feb 7 10:08:07 1998 Assar Westerlund - - * xnlock.c: Don't use REALM_SZ + 1, just REALM_SZ - -Sat Nov 29 04:58:19 1997 Johan Danielsson - - * xnlock.c: Make it build w/o krb4. - diff --git a/crypto/heimdal/appl/xnlock/Makefile b/crypto/heimdal/appl/xnlock/Makefile deleted file mode 100644 index 6276ea6..0000000 --- a/crypto/heimdal/appl/xnlock/Makefile +++ /dev/null @@ -1,659 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# appl/xnlock/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.15 2000/11/15 22:51:12 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = - -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs $(WFLAGS_NOIMPLICITINT) -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_krb4) $(X_CFLAGS) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -bin_PROGRAMS = xnlock -#bin_PROGRAMS = - -man_MANS = xnlock.1 - -EXTRA_DIST = $(man_MANS) nose.0.left nose.0.right nose.1.left nose.1.right \ - nose.down nose.front nose.left.front nose.right.front - - -LDADD = \ - $(LIB_kafs) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(X_LIBS) -lXt $(X_PRE_LIBS) -lX11 $(X_EXTRA_LIBS) - -subdir = appl/xnlock -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -bin_PROGRAMS = xnlock$(EXEEXT) -#bin_PROGRAMS = -PROGRAMS = $(bin_PROGRAMS) - -xnlock_SOURCES = xnlock.c -xnlock_OBJECTS = xnlock.$(OBJEXT) -xnlock_LDADD = $(LDADD) -xnlock_DEPENDENCIES = \ - $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la -#xnlock_DEPENDENCIES = -#xnlock_DEPENDENCIES = \ -# $(top_builddir)/lib/kafs/libkafs.la \ -# $(top_builddir)/lib/krb5/libkrb5.la \ -# $(top_builddir)/lib/asn1/libasn1.la -##xnlock_DEPENDENCIES = \ -## $(top_builddir)/lib/kafs/libkafs.la -xnlock_LDFLAGS = - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = xnlock.c -MANS = $(man_MANS) -DIST_COMMON = README ChangeLog Makefile.am Makefile.in -SOURCES = xnlock.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/xnlock/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -xnlock$(EXEEXT): $(xnlock_OBJECTS) $(xnlock_DEPENDENCIES) - @rm -f xnlock$(EXEEXT) - $(LINK) $(xnlock_LDFLAGS) $(xnlock_OBJECTS) $(xnlock_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ - rm -f $(DESTDIR)$(man1dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-binPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man1 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man - -uninstall-man: uninstall-man1 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-binPROGRAMS clean-generic clean-libtool distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-binPROGRAMS install-data install-data-am \ - install-data-local install-exec install-exec-am install-info \ - install-info-am install-man install-man1 install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-info-am \ - uninstall-man uninstall-man1 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/xnlock/Makefile.am b/crypto/heimdal/appl/xnlock/Makefile.am deleted file mode 100644 index a8e6440..0000000 --- a/crypto/heimdal/appl/xnlock/Makefile.am +++ /dev/null @@ -1,30 +0,0 @@ -# $Id: Makefile.am,v 1.15 2000/11/15 22:51:12 assar Exp $ - -include $(top_srcdir)/Makefile.am.common - -INCLUDES += $(INCLUDE_krb4) $(X_CFLAGS) - -WFLAGS += $(WFLAGS_NOIMPLICITINT) - -if HAVE_X - -bin_PROGRAMS = xnlock - -else - -bin_PROGRAMS = - -endif - -man_MANS = xnlock.1 - -EXTRA_DIST = $(man_MANS) nose.0.left nose.0.right nose.1.left nose.1.right \ - nose.down nose.front nose.left.front nose.right.front - -LDADD = \ - $(LIB_kafs) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(X_LIBS) -lXt $(X_PRE_LIBS) -lX11 $(X_EXTRA_LIBS) diff --git a/crypto/heimdal/appl/xnlock/Makefile.in b/crypto/heimdal/appl/xnlock/Makefile.in deleted file mode 100644 index 9ea65a7..0000000 --- a/crypto/heimdal/appl/xnlock/Makefile.in +++ /dev/null @@ -1,659 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.15 2000/11/15 22:51:12 assar Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ - -WFLAGS = @WFLAGS@ $(WFLAGS_NOIMPLICITINT) -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_krb4) $(X_CFLAGS) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -@HAVE_X_TRUE@bin_PROGRAMS = xnlock -@HAVE_X_FALSE@bin_PROGRAMS = - -man_MANS = xnlock.1 - -EXTRA_DIST = $(man_MANS) nose.0.left nose.0.right nose.1.left nose.1.right \ - nose.down nose.front nose.left.front nose.right.front - - -LDADD = \ - $(LIB_kafs) \ - $(LIB_krb5) \ - $(LIB_krb4) \ - $(LIB_des) \ - $(LIB_roken) \ - $(X_LIBS) -lXt $(X_PRE_LIBS) -lX11 $(X_EXTRA_LIBS) - -subdir = appl/xnlock -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -@HAVE_X_TRUE@bin_PROGRAMS = xnlock$(EXEEXT) -@HAVE_X_FALSE@bin_PROGRAMS = -PROGRAMS = $(bin_PROGRAMS) - -xnlock_SOURCES = xnlock.c -xnlock_OBJECTS = xnlock.$(OBJEXT) -xnlock_LDADD = $(LDADD) -@KRB4_FALSE@@KRB5_TRUE@xnlock_DEPENDENCIES = \ -@KRB4_FALSE@@KRB5_TRUE@ $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB4_FALSE@@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB4_FALSE@@KRB5_FALSE@xnlock_DEPENDENCIES = -@KRB4_TRUE@@KRB5_TRUE@xnlock_DEPENDENCIES = \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/kafs/libkafs.la \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB4_TRUE@@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la -@KRB4_TRUE@@KRB5_FALSE@xnlock_DEPENDENCIES = \ -@KRB4_TRUE@@KRB5_FALSE@ $(top_builddir)/lib/kafs/libkafs.la -xnlock_LDFLAGS = - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = xnlock.c -MANS = $(man_MANS) -DIST_COMMON = README ChangeLog Makefile.am Makefile.in -SOURCES = xnlock.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign appl/xnlock/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(bindir) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ - rm -f $(DESTDIR)$(bindir)/$$f; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -xnlock$(EXEEXT): $(xnlock_OBJECTS) $(xnlock_DEPENDENCIES) - @rm -f xnlock$(EXEEXT) - $(LINK) $(xnlock_LDFLAGS) $(xnlock_OBJECTS) $(xnlock_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man1dir = $(mandir)/man1 -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man1dir) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ - rm -f $(DESTDIR)$(man1dir)/$$inst; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-man - -install-exec-am: install-binPROGRAMS - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man1 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man - -uninstall-man: uninstall-man1 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-binPROGRAMS clean-generic clean-libtool distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-binPROGRAMS install-data install-data-am \ - install-data-local install-exec install-exec-am install-info \ - install-info-am install-man install-man1 install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-binPROGRAMS uninstall-info-am \ - uninstall-man uninstall-man1 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/appl/xnlock/README b/crypto/heimdal/appl/xnlock/README deleted file mode 100644 index 5b16c52..0000000 --- a/crypto/heimdal/appl/xnlock/README +++ /dev/null @@ -1,21 +0,0 @@ -xnlock -- Dan Heller, 1990 -"nlock" is a "new lockscreen" type program... something that prevents -screen burnout by making most of it "black" while providing something -of interest to be displayed in case anyone is watching. The program -also provides added security. - -"xnlock" is the X11 version of the program. - -Original sunview version written by Dan Heller 1985 (not included). - -For a real description of how this program works, read the -man page or just try running it. - -The one major outstanding bug with this program is that every -once in a while, two horizontal lines appear below the little -figure that runs around the screen. If someone can find and -fix this bug, *please* let me know -- I don't have time to -look and if I waited till I had time, you'd never see this -program... It has something to do with the "looking down" -position and then directly moving up and right or left... - diff --git a/crypto/heimdal/appl/xnlock/nose.0.left b/crypto/heimdal/appl/xnlock/nose.0.left deleted file mode 100644 index cb3d152..0000000 --- a/crypto/heimdal/appl/xnlock/nose.0.left +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_0_left_width 64 -#define nose_0_left_height 64 -static unsigned char nose_0_left_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xc0,0xff,0xff,0x07,0x00,0x00,0x00,0x00,0x40,0x00, - 0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40, - 0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00, - 0x40,0x00,0x00,0x04,0x00,0x00,0x00,0xf8,0xff,0xff,0xff,0xff,0x3f,0x00,0x00, - 0x08,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x20,0x00, - 0x00,0xf8,0xff,0xff,0xff,0xff,0x3f,0x00,0x00,0xf0,0x03,0x00,0x00,0x80,0x00, - 0x00,0x00,0x0e,0x0c,0x00,0x00,0x80,0x01,0x00,0x00,0x03,0x30,0x00,0x00,0x00, - 0x01,0x00,0x80,0x00,0x40,0x00,0x00,0x00,0x02,0x00,0x40,0x00,0xc0,0x00,0x00, - 0x00,0x02,0x00,0x20,0x00,0x80,0x00,0x00,0x00,0x04,0x00,0x10,0x00,0x00,0x00, - 0x00,0x00,0x04,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x0c,0x00,0x08,0x00,0x00, - 0x00,0x00,0x00,0x08,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x08,0x00, - 0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08, - 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00, - 0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10, - 0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x00,0x00,0x01,0x00,0x00, - 0x18,0x00,0x20,0x00,0x00,0x01,0x00,0x00,0x08,0x00,0x40,0x00,0x80,0x00,0x00, - 0x00,0x08,0x00,0x80,0x00,0x40,0x00,0x00,0x00,0x0c,0x00,0x00,0x01,0x20,0x00, - 0x00,0x00,0x04,0x00,0x00,0x06,0x18,0x00,0x00,0x00,0x06,0x00,0x00,0xf8,0x07, - 0x00,0x00,0x00,0x02,0x00,0x00,0x00,0xf8,0xff,0xff,0xff,0x01,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf8,0x0f,0x00,0x00,0x00, - 0x00,0xff,0x00,0x04,0x10,0x00,0x00,0x00,0xc0,0x00,0x03,0x03,0x10,0x00,0x00, - 0x00,0x30,0x00,0x0c,0x01,0x20,0x00,0x00,0x00,0x08,0x00,0x98,0x00,0x20,0x00, - 0x00,0x00,0x0c,0x03,0x60,0x00,0x20,0x00,0x00,0x00,0xc2,0x00,0xc0,0x00,0x20, - 0x00,0x00,0x00,0x42,0x00,0x80,0x00,0x20,0x00,0x00,0x00,0x21,0x00,0x00,0x01, - 0x20,0x00,0x00,0x00,0x21,0x00,0x00,0x01,0x20,0x00,0x00,0x00,0x21,0x00,0x00, - 0x00,0x20,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x01,0x00, - 0x00,0x00,0x40,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x02, - 0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x20,0x00,0x00,0x00, - 0x18,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x70,0x00,0x00,0x00,0x10,0x00,0x00, - 0x00,0xc0,0xff,0xff,0xff,0x0f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.0.right b/crypto/heimdal/appl/xnlock/nose.0.right deleted file mode 100644 index f387baa..0000000 --- a/crypto/heimdal/appl/xnlock/nose.0.right +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_0_right_width 64 -#define nose_0_right_height 64 -static unsigned char nose_0_right_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xe0,0xff,0xff,0x03,0x00,0x00,0x00,0x00,0x20,0x00, - 0x00,0x02,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x20, - 0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x02,0x00,0x00,0x00,0x00, - 0x20,0x00,0x00,0x02,0x00,0x00,0x00,0xfc,0xff,0xff,0xff,0xff,0x1f,0x00,0x00, - 0x04,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x10,0x00, - 0x00,0xfc,0xff,0xff,0xff,0xff,0x1f,0x00,0x00,0x00,0x01,0x00,0x00,0xc0,0x0f, - 0x00,0x00,0x80,0x01,0x00,0x00,0x30,0x70,0x00,0x00,0x80,0x00,0x00,0x00,0x0c, - 0xc0,0x00,0x00,0x40,0x00,0x00,0x00,0x02,0x00,0x01,0x00,0x40,0x00,0x00,0x00, - 0x03,0x00,0x02,0x00,0x20,0x00,0x00,0x00,0x01,0x00,0x04,0x00,0x20,0x00,0x00, - 0x00,0x00,0x00,0x08,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x10,0x00, - 0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08, - 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00, - 0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10, - 0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00, - 0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x18,0x00,0x00,0x80,0x00, - 0x00,0x08,0x00,0x10,0x00,0x00,0x80,0x00,0x00,0x04,0x00,0x10,0x00,0x00,0x00, - 0x01,0x00,0x02,0x00,0x30,0x00,0x00,0x00,0x02,0x00,0x01,0x00,0x20,0x00,0x00, - 0x00,0x04,0x80,0x00,0x00,0x60,0x00,0x00,0x00,0x18,0x60,0x00,0x00,0x40,0x00, - 0x00,0x00,0xe0,0x1f,0x00,0x00,0x80,0xff,0xff,0xff,0x1f,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x1f,0x00,0x00,0x00,0x00,0x00, - 0x00,0x08,0x20,0x00,0xff,0x00,0x00,0x00,0x00,0x08,0xc0,0xc0,0x00,0x03,0x00, - 0x00,0x00,0x04,0x80,0x30,0x00,0x0c,0x00,0x00,0x00,0x04,0x00,0x19,0x00,0x10, - 0x00,0x00,0x00,0x04,0x00,0x06,0xc0,0x30,0x00,0x00,0x00,0x04,0x00,0x03,0x00, - 0x43,0x00,0x00,0x00,0x04,0x00,0x01,0x00,0x42,0x00,0x00,0x00,0x04,0x80,0x00, - 0x00,0x84,0x00,0x00,0x00,0x04,0x80,0x00,0x00,0x84,0x00,0x00,0x00,0x04,0x00, - 0x00,0x00,0x84,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x02, - 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x40,0x00,0x00,0x00, - 0x02,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x20,0x00,0x00, - 0x00,0x04,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x0e,0x00, - 0x00,0x00,0xf0,0xff,0xff,0xff,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.1.left b/crypto/heimdal/appl/xnlock/nose.1.left deleted file mode 100644 index 8a6b829..0000000 --- a/crypto/heimdal/appl/xnlock/nose.1.left +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_1_left_width 64 -#define nose_1_left_height 64 -static unsigned char nose_1_left_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xc0,0xff,0xff,0x07,0x00,0x00,0x00,0x00,0x40,0x00, - 0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40, - 0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00, - 0x40,0x00,0x00,0x04,0x00,0x00,0x00,0xf8,0xff,0xff,0xff,0xff,0x3f,0x00,0x00, - 0x08,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x20,0x00, - 0x00,0xf8,0xff,0xff,0xff,0xff,0x3f,0x00,0x00,0xf0,0x03,0x00,0x00,0x80,0x00, - 0x00,0x00,0x0e,0x0c,0x00,0x00,0x80,0x01,0x00,0x00,0x03,0x30,0x00,0x00,0x00, - 0x01,0x00,0x80,0x00,0x40,0x00,0x00,0x00,0x02,0x00,0x40,0x00,0xc0,0x00,0x00, - 0x00,0x02,0x00,0x20,0x00,0x80,0x00,0x00,0x00,0x04,0x00,0x10,0x00,0x00,0x00, - 0x00,0x00,0x04,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x0c,0x00,0x08,0x00,0x00, - 0x00,0x00,0x00,0x08,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x08,0x00, - 0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08, - 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00, - 0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10, - 0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x00,0x00,0x01,0x00,0x00, - 0x18,0x00,0x10,0x00,0x00,0x01,0x00,0x00,0x08,0x00,0x20,0x00,0x80,0x00,0x00, - 0x00,0x08,0x00,0x40,0x00,0x40,0x00,0x00,0x00,0x0c,0x00,0x80,0x00,0x20,0x00, - 0x00,0x00,0xe4,0x00,0x00,0x03,0x18,0x00,0x00,0x00,0x26,0x03,0x00,0xfc,0x07, - 0x00,0x00,0x00,0x12,0x0c,0x00,0x00,0xf8,0xff,0xff,0xff,0x11,0x10,0x80,0x1f, - 0x00,0x00,0x00,0x00,0x08,0x20,0x60,0x60,0xc0,0x07,0x00,0x00,0x04,0x40,0x10, - 0xc0,0x20,0x08,0x00,0x1f,0x02,0x40,0x08,0x00,0x21,0x10,0xc0,0x60,0x02,0x40, - 0x04,0x00,0x12,0x20,0x20,0x80,0x02,0x20,0xc2,0x00,0x14,0x40,0x18,0x00,0x03, - 0x20,0x22,0x00,0x0c,0x80,0x04,0x03,0x02,0x10,0x12,0x00,0x08,0x80,0x86,0x00, - 0x04,0x10,0x12,0x00,0x10,0x80,0x42,0x00,0x18,0x08,0x12,0x00,0x10,0x40,0x42, - 0x00,0x00,0x04,0x02,0x00,0x20,0x40,0x42,0x00,0x00,0x04,0x02,0x00,0x00,0x20, - 0x42,0x00,0x00,0x02,0x04,0x00,0x00,0x20,0x02,0x00,0x00,0x01,0x04,0x00,0x00, - 0x20,0x02,0x00,0x00,0x01,0x08,0x00,0x00,0x20,0x04,0x00,0x80,0x00,0x10,0x00, - 0x00,0x20,0x0c,0x00,0x80,0x00,0x60,0x00,0x00,0x10,0x08,0x00,0x40,0x00,0x80, - 0xff,0xff,0x0f,0x30,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0xc0,0xff,0x0f,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.1.right b/crypto/heimdal/appl/xnlock/nose.1.right deleted file mode 100644 index f7c8962..0000000 --- a/crypto/heimdal/appl/xnlock/nose.1.right +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_1_right_width 64 -#define nose_1_right_height 64 -static unsigned char nose_1_right_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xe0,0xff,0xff,0x03,0x00,0x00,0x00,0x00,0x20,0x00, - 0x00,0x02,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x20, - 0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x02,0x00,0x00,0x00,0x00, - 0x20,0x00,0x00,0x02,0x00,0x00,0x00,0xfc,0xff,0xff,0xff,0xff,0x1f,0x00,0x00, - 0x04,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x10,0x00, - 0x00,0xfc,0xff,0xff,0xff,0xff,0x1f,0x00,0x00,0x00,0x01,0x00,0x00,0xc0,0x0f, - 0x00,0x00,0x80,0x01,0x00,0x00,0x30,0x70,0x00,0x00,0x80,0x00,0x00,0x00,0x0c, - 0xc0,0x00,0x00,0x40,0x00,0x00,0x00,0x02,0x00,0x01,0x00,0x40,0x00,0x00,0x00, - 0x03,0x00,0x02,0x00,0x20,0x00,0x00,0x00,0x01,0x00,0x04,0x00,0x20,0x00,0x00, - 0x00,0x00,0x00,0x08,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x10,0x00, - 0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08, - 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00, - 0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10, - 0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00, - 0x10,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x18,0x00,0x00,0x80,0x00, - 0x00,0x08,0x00,0x10,0x00,0x00,0x80,0x00,0x00,0x08,0x00,0x10,0x00,0x00,0x00, - 0x01,0x00,0x04,0x00,0x30,0x00,0x00,0x00,0x02,0x00,0x02,0x00,0x27,0x00,0x00, - 0x00,0x04,0x00,0x01,0xc0,0x64,0x00,0x00,0x00,0x18,0xc0,0x00,0x30,0x48,0x00, - 0x00,0x00,0xe0,0x3f,0x00,0x08,0x88,0xff,0xff,0xff,0x1f,0x00,0x00,0x04,0x10, - 0x00,0x00,0x00,0x00,0xf8,0x01,0x02,0x20,0x00,0x00,0xe0,0x03,0x06,0x06,0x02, - 0x40,0xf8,0x00,0x10,0x04,0x03,0x08,0x02,0x40,0x06,0x03,0x08,0x84,0x00,0x10, - 0x04,0x40,0x01,0x04,0x04,0x48,0x00,0x20,0x04,0xc0,0x00,0x18,0x02,0x28,0x00, - 0x43,0x08,0x40,0xc0,0x20,0x01,0x30,0x00,0x44,0x08,0x20,0x00,0x61,0x01,0x10, - 0x00,0x48,0x10,0x18,0x00,0x42,0x01,0x08,0x00,0x48,0x20,0x00,0x00,0x42,0x02, - 0x08,0x00,0x48,0x20,0x00,0x00,0x42,0x02,0x04,0x00,0x40,0x40,0x00,0x00,0x42, - 0x04,0x00,0x00,0x40,0x80,0x00,0x00,0x40,0x04,0x00,0x00,0x20,0x80,0x00,0x00, - 0x40,0x04,0x00,0x00,0x20,0x00,0x01,0x00,0x20,0x04,0x00,0x00,0x10,0x00,0x01, - 0x00,0x30,0x04,0x00,0x00,0x08,0x00,0x02,0x00,0x10,0x08,0x00,0x00,0x06,0x00, - 0x0c,0x00,0x0c,0xf0,0xff,0xff,0x01,0x00,0xf0,0xff,0x03,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.down b/crypto/heimdal/appl/xnlock/nose.down deleted file mode 100644 index e8bdba4..0000000 --- a/crypto/heimdal/appl/xnlock/nose.down +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_down_width 64 -#define nose_down_height 64 -static unsigned char nose_down_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0xfc,0xff,0x01,0x00,0x00,0x00,0x00,0xc0,0x03,0x00,0x1e,0x00, - 0x00,0x00,0x00,0x38,0x00,0x00,0xe0,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00, - 0x03,0x00,0x00,0x80,0x01,0x00,0x00,0x00,0x04,0x00,0x00,0x40,0x00,0x00,0x00, - 0x00,0x08,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x10,0x00,0x80, - 0x1f,0x00,0x40,0x00,0x00,0x08,0x00,0x60,0x60,0x00,0x80,0x00,0x00,0x08,0x00, - 0x10,0x80,0x00,0x80,0x00,0x00,0x04,0x00,0x08,0x00,0x01,0x00,0x01,0x00,0x04, - 0x00,0x08,0x00,0x01,0x00,0x01,0x00,0x02,0x00,0x18,0x80,0x01,0x00,0x02,0x00, - 0x02,0x00,0x68,0x60,0x01,0x00,0x02,0x00,0x02,0x00,0x88,0x1f,0x01,0x00,0x02, - 0x00,0x02,0x00,0x08,0x00,0x01,0x00,0x02,0x00,0x02,0x00,0x10,0x80,0x00,0x00, - 0x03,0x00,0x06,0x00,0x60,0x60,0x00,0x80,0x02,0x00,0x0c,0x00,0x80,0x1f,0x00, - 0x40,0x01,0x00,0x14,0x00,0x00,0x00,0x00,0x20,0x01,0x00,0x28,0x00,0x00,0x00, - 0x00,0x90,0x00,0x00,0x50,0x00,0x00,0x00,0x00,0x48,0x00,0x00,0xa0,0x01,0x00, - 0x00,0x00,0x26,0x00,0x00,0x40,0x1e,0x00,0x00,0xc0,0x11,0x00,0x00,0x80,0xe1, - 0x03,0x00,0x3c,0x0c,0x00,0x00,0x00,0x0e,0xfc,0xff,0x83,0x03,0x00,0x00,0x00, - 0xf0,0x01,0x00,0x78,0x00,0x00,0x00,0x00,0x00,0xfe,0xff,0x0f,0x00,0x00,0x00, - 0x00,0x80,0x03,0x00,0x0c,0x00,0x00,0x00,0x00,0x80,0x02,0x00,0x14,0x00,0x00, - 0x00,0x00,0x60,0x04,0x00,0x12,0x00,0x00,0xc0,0x7f,0x10,0x04,0x00,0x22,0xe0, - 0x01,0x70,0xc0,0x18,0x08,0x00,0x61,0x1c,0x06,0x10,0x00,0x0f,0x30,0xc0,0x80, - 0x07,0x08,0x08,0x00,0x06,0xc0,0x3f,0x80,0x01,0x08,0x08,0x00,0x18,0x00,0x02, - 0xc0,0x00,0x10,0x04,0x00,0x30,0x00,0x05,0x30,0x00,0x10,0x04,0x00,0x00,0x80, - 0x08,0x18,0x00,0x20,0x04,0x00,0x00,0x80,0x08,0x00,0x00,0x20,0x04,0x00,0x00, - 0x40,0x10,0x00,0x00,0x20,0x24,0x00,0x00,0x40,0x10,0x00,0x00,0x22,0x24,0x00, - 0x00,0x40,0x10,0x00,0x00,0x22,0x44,0x00,0x00,0x40,0x10,0x00,0x00,0x11,0x84, - 0x01,0x00,0xc0,0x18,0x00,0xc0,0x10,0x08,0x00,0x00,0x80,0x08,0x00,0x00,0x08, - 0x30,0x00,0x00,0x80,0x08,0x00,0x00,0x04,0xe0,0xff,0xff,0xff,0xf8,0xff,0xff, - 0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.front b/crypto/heimdal/appl/xnlock/nose.front deleted file mode 100644 index 64b8201..0000000 --- a/crypto/heimdal/appl/xnlock/nose.front +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_front_width 64 -#define nose_front_height 64 -static unsigned char nose_front_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xc0,0xff,0xff,0x07,0x00,0x00,0x00,0x00,0x40,0x00, - 0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40, - 0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00, - 0x40,0x00,0x00,0x04,0x00,0x00,0x00,0xf8,0xff,0xff,0xff,0xff,0x3f,0x00,0x00, - 0x08,0x00,0xc0,0x1f,0x00,0x20,0x00,0x00,0x08,0x00,0x30,0x60,0x00,0x20,0x00, - 0x00,0xf8,0xff,0x0f,0x80,0xff,0x3f,0x00,0x00,0x00,0x02,0x02,0x00,0x82,0x00, - 0x00,0x00,0x00,0x03,0x01,0x00,0x84,0x01,0x00,0x00,0x00,0x81,0x00,0x00,0x08, - 0x01,0x00,0x00,0x80,0x80,0x00,0x00,0x08,0x02,0x00,0x00,0x80,0x40,0x00,0x00, - 0x10,0x02,0x00,0x00,0x40,0x40,0x00,0x00,0x10,0x04,0x00,0x00,0x40,0x20,0x00, - 0x00,0x20,0x04,0x00,0x00,0x60,0x20,0x00,0x00,0x20,0x0c,0x00,0x00,0x20,0x20, - 0x00,0x00,0x20,0x08,0x00,0x00,0x20,0x20,0x00,0x00,0x20,0x08,0x00,0x00,0x10, - 0x20,0x00,0x00,0x20,0x10,0x00,0x00,0x10,0x20,0x00,0x00,0x20,0x10,0x00,0x00, - 0x10,0x20,0x00,0x00,0x20,0x10,0x00,0x00,0x10,0x40,0x00,0x00,0x10,0x10,0x00, - 0x00,0x10,0x40,0x00,0x00,0x10,0x10,0x00,0x00,0x10,0x80,0x00,0x00,0x08,0x10, - 0x00,0x00,0x10,0x80,0x00,0x00,0x08,0x10,0x00,0x00,0x30,0x00,0x01,0x00,0x04, - 0x18,0x00,0x00,0x20,0x00,0x02,0x00,0x02,0x08,0x00,0x00,0x20,0x00,0x0c,0x80, - 0x01,0x08,0x00,0x00,0x60,0x00,0x30,0x60,0x00,0x0c,0x00,0x00,0x40,0x00,0xc0, - 0x1f,0x00,0x04,0x00,0x00,0xc0,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x01, - 0x00,0x00,0x00,0x02,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,0x01,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x0f,0xc0,0x0f,0x00,0x00,0x00, - 0x00,0x40,0x10,0x20,0x10,0x00,0x00,0x00,0x00,0x20,0x60,0x30,0x20,0x00,0x00, - 0x00,0x00,0x20,0xc0,0x18,0x20,0x00,0x00,0xc0,0x7f,0x10,0x80,0x0d,0x40,0xe0, - 0x01,0x70,0xc0,0x18,0x00,0x05,0x40,0x1c,0x06,0x10,0x00,0x0f,0x00,0x05,0x80, - 0x07,0x08,0x08,0x00,0x06,0x00,0x05,0x80,0x01,0x08,0x08,0x00,0x18,0x00,0x05, - 0xc0,0x00,0x10,0x04,0x00,0x30,0x00,0x05,0x30,0x00,0x10,0x04,0x00,0x00,0x80, - 0x08,0x18,0x00,0x20,0x04,0x00,0x00,0x80,0x08,0x00,0x00,0x20,0x04,0x00,0x00, - 0x40,0x10,0x00,0x00,0x20,0x24,0x00,0x00,0x40,0x10,0x00,0x00,0x22,0x24,0x00, - 0x00,0x40,0x10,0x00,0x00,0x22,0x44,0x00,0x00,0x40,0x10,0x00,0x00,0x11,0x84, - 0x01,0x00,0xc0,0x18,0x00,0xc0,0x10,0x08,0x00,0x00,0x80,0x08,0x00,0x00,0x08, - 0x30,0x00,0x00,0x80,0x08,0x00,0x00,0x04,0xe0,0xff,0xff,0xff,0xf8,0xff,0xff, - 0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.left.front b/crypto/heimdal/appl/xnlock/nose.left.front deleted file mode 100644 index 3a871ea..0000000 --- a/crypto/heimdal/appl/xnlock/nose.left.front +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_left_front_width 64 -#define nose_left_front_height 64 -static unsigned char nose_left_front_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xc0,0xff,0xff,0x07,0x00,0x00,0x00,0x00,0x40,0x00, - 0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40, - 0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x04,0x00,0x00,0x00,0x00, - 0x40,0x00,0x00,0x04,0x00,0x00,0x00,0xf8,0xff,0xff,0xff,0xff,0x3f,0x00,0x00, - 0x08,0x00,0xe0,0x0f,0x00,0x20,0x00,0x00,0x08,0x00,0x18,0x30,0x00,0x20,0x00, - 0x00,0xf8,0xff,0x07,0xc0,0xff,0x3f,0x00,0x00,0x00,0x02,0x01,0x00,0x81,0x00, - 0x00,0x00,0x00,0x83,0x00,0x00,0x82,0x01,0x00,0x00,0x00,0x41,0x00,0x00,0x04, - 0x01,0x00,0x00,0x80,0x40,0x00,0x00,0x04,0x02,0x00,0x00,0x80,0x20,0x00,0x00, - 0x08,0x02,0x00,0x00,0x40,0x20,0x00,0x00,0x08,0x04,0x00,0x00,0x40,0x10,0x00, - 0x00,0x10,0x04,0x00,0x00,0x60,0x10,0x00,0x00,0x10,0x0c,0x00,0x00,0x20,0x10, - 0x00,0x00,0x10,0x08,0x00,0x00,0x30,0x10,0x00,0x00,0x10,0x08,0x00,0x00,0x10, - 0x10,0x00,0x00,0x10,0x10,0x00,0x00,0x10,0x10,0x00,0x00,0x10,0x10,0x00,0x00, - 0x10,0x10,0x00,0x00,0x10,0x10,0x00,0x00,0x10,0x20,0x00,0x00,0x08,0x10,0x00, - 0x00,0x10,0x20,0x00,0x00,0x08,0x10,0x00,0x00,0x10,0x40,0x00,0x00,0x04,0x10, - 0x00,0x00,0x30,0x40,0x00,0x00,0x04,0x10,0x00,0x00,0x20,0x80,0x00,0x00,0x02, - 0x18,0x00,0x00,0x20,0x00,0x01,0x00,0x01,0x08,0x00,0x00,0x60,0x00,0x06,0xc0, - 0x00,0x08,0x00,0x00,0x80,0x00,0x18,0x30,0x00,0x0c,0x00,0x00,0x80,0x00,0xe0, - 0x0f,0x00,0x04,0x00,0x00,0x80,0x01,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x01, - 0x00,0x00,0x00,0x02,0x00,0x00,0x00,0xfe,0xff,0xff,0xff,0x01,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf8,0x0f,0x00,0x00,0x00, - 0x00,0xff,0x00,0x04,0x10,0x00,0x00,0x00,0xe0,0x00,0x07,0x02,0x10,0x00,0x00, - 0x00,0x30,0x00,0x8c,0x01,0x20,0x00,0x00,0x00,0x0c,0x00,0x90,0x00,0x20,0x00, - 0x00,0x00,0x04,0x03,0x60,0x00,0x20,0x00,0x00,0x00,0xc2,0x00,0xc0,0x00,0x20, - 0x00,0x00,0x00,0x42,0x00,0x00,0x01,0x20,0x00,0x00,0x00,0x21,0x00,0x00,0x02, - 0x20,0x00,0x00,0x00,0x21,0x00,0x00,0x06,0x20,0x00,0x00,0x00,0x21,0x00,0x00, - 0x00,0x20,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x03,0x00, - 0x00,0x00,0x40,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x02, - 0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x20,0x00,0x00,0x00, - 0x18,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x70,0x00,0x00,0x00,0x10,0x00,0x00, - 0x00,0xc0,0xff,0xff,0xff,0x0f,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/nose.right.front b/crypto/heimdal/appl/xnlock/nose.right.front deleted file mode 100644 index f821417..0000000 --- a/crypto/heimdal/appl/xnlock/nose.right.front +++ /dev/null @@ -1,38 +0,0 @@ -#define nose_right_front_width 64 -#define nose_right_front_height 64 -static unsigned char nose_right_front_bits[] = { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0xe0,0xff,0xff,0x03,0x00,0x00,0x00,0x00,0x20,0x00, - 0x00,0x02,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x20, - 0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x02,0x00,0x00,0x00,0x00, - 0x20,0x00,0x00,0x02,0x00,0x00,0x00,0xfc,0xff,0xff,0xff,0xff,0x1f,0x00,0x00, - 0x04,0x00,0xf0,0x07,0x00,0x10,0x00,0x00,0x04,0x00,0x0c,0x18,0x00,0x10,0x00, - 0x00,0xfc,0xff,0x03,0xe0,0xff,0x1f,0x00,0x00,0x00,0x81,0x00,0x80,0x40,0x00, - 0x00,0x00,0x80,0x41,0x00,0x00,0xc1,0x00,0x00,0x00,0x80,0x20,0x00,0x00,0x82, - 0x00,0x00,0x00,0x40,0x20,0x00,0x00,0x02,0x01,0x00,0x00,0x40,0x10,0x00,0x00, - 0x04,0x01,0x00,0x00,0x20,0x10,0x00,0x00,0x04,0x02,0x00,0x00,0x20,0x08,0x00, - 0x00,0x08,0x02,0x00,0x00,0x30,0x08,0x00,0x00,0x08,0x06,0x00,0x00,0x10,0x08, - 0x00,0x00,0x08,0x04,0x00,0x00,0x10,0x08,0x00,0x00,0x08,0x0c,0x00,0x00,0x08, - 0x08,0x00,0x00,0x08,0x08,0x00,0x00,0x08,0x08,0x00,0x00,0x08,0x08,0x00,0x00, - 0x08,0x08,0x00,0x00,0x08,0x08,0x00,0x00,0x08,0x10,0x00,0x00,0x04,0x08,0x00, - 0x00,0x08,0x10,0x00,0x00,0x04,0x08,0x00,0x00,0x08,0x20,0x00,0x00,0x02,0x08, - 0x00,0x00,0x08,0x20,0x00,0x00,0x02,0x0c,0x00,0x00,0x18,0x40,0x00,0x00,0x01, - 0x04,0x00,0x00,0x10,0x80,0x00,0x80,0x00,0x04,0x00,0x00,0x10,0x00,0x03,0x60, - 0x00,0x06,0x00,0x00,0x30,0x00,0x0c,0x18,0x00,0x01,0x00,0x00,0x20,0x00,0xf0, - 0x07,0x00,0x01,0x00,0x00,0x60,0x00,0x00,0x00,0x80,0x01,0x00,0x00,0x40,0x00, - 0x00,0x00,0x80,0x00,0x00,0x00,0x80,0xff,0xff,0xff,0x7f,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf0,0x1f,0x00,0x00,0x00,0x00,0x00, - 0x00,0x08,0x20,0x00,0xff,0x00,0x00,0x00,0x00,0x08,0x40,0xe0,0x00,0x07,0x00, - 0x00,0x00,0x04,0x80,0x31,0x00,0x0c,0x00,0x00,0x00,0x04,0x00,0x09,0x00,0x30, - 0x00,0x00,0x00,0x04,0x00,0x06,0xc0,0x20,0x00,0x00,0x00,0x04,0x00,0x03,0x00, - 0x43,0x00,0x00,0x00,0x04,0x80,0x00,0x00,0x42,0x00,0x00,0x00,0x04,0x40,0x00, - 0x00,0x84,0x00,0x00,0x00,0x04,0x60,0x00,0x00,0x84,0x00,0x00,0x00,0x04,0x00, - 0x00,0x00,0x84,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x02, - 0x00,0x00,0x00,0xc0,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x40,0x00,0x00,0x00, - 0x02,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x20,0x00,0x00, - 0x00,0x04,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x0e,0x00, - 0x00,0x00,0xf0,0xff,0xff,0xff,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00}; diff --git a/crypto/heimdal/appl/xnlock/xnlock.1 b/crypto/heimdal/appl/xnlock/xnlock.1 deleted file mode 100644 index c62417d..0000000 --- a/crypto/heimdal/appl/xnlock/xnlock.1 +++ /dev/null @@ -1,123 +0,0 @@ -.\" xnlock -- Dan Heller 1985 -.TH XNLOCK 1L "19 April 1990" -.SH NAME -xnlock \- amusing lock screen program with message for passers-by -.SH SYNOPSIS -.B xnlock -[ -\fIoptions\fP -] -[ -\fImessage\fP -] -.SH DESCRIPTION -.I xnlock -is a program that acts as a screen saver for workstations running X11. -It also "locks" the screen such that the workstation can be left -unattended without worry that someone else will walk up to it and -mess everything up. When \fIxnlock\fP is running, a little man with -a big nose and a hat runs around spewing out messages to the screen. -By default, the messages are "humorous", but that depends on your -sense of humor. -.LP -If a key or mouse button is pressed, a prompt is printed requesting the -user's password. If a RETURN is not typed within 30 seconds, -the little man resumes running around. -.LP -Text on the command line is used as the message. For example: -.br - % xnlock I\'m out to lunch for a couple of hours. -.br -Note the need to quote shell metacharacters. -.LP -In the absence of flags or text, \fIxnlock\fP displays random fortunes. -.SH OPTIONS -Command line options override all resource specifications. -All arguments that are not associated with a command line option -is taken to be message text that the little man will "say" every -once in a while. The resource \fBxnlock.text\fP may be set to -a string. -.TP -.BI \-fn " fontname" -The default font is the first 18 point font in the \fInew century schoolbook\fP -family. While larger fonts are recokmmended over smaller ones, any font -in the server's font list will work. The resource to use for this option -is \fBxnlock.font\fP. -.TP -.BI \-filename " filename" -Take the message to be displayed from the file \fIfilename\fP. -If \fIfilename\fP is not specified, \fI$HOME/.msgfile\fP is used. -If the contents of the file are changed during runtime, the most recent text -of the file is used (allowing the displayed message to be altered remotely). -Carriage returns within the text are allowed, but tabs or other control -characters are not translated and should not be used. -The resource available for this option is \fBxnlock.file\fP. -.TP -.BI \-ar -Accept root's password to unlock screen. This option is true by -default. The reason for this is so that someone's screen may be -unlocked by autorized users in case of emergency and the person -running the program is still out to lunch. The resource available -for specifying this option is \fBxnlock.acceptRootPasswd\fP. -.TP -.BI \-noar -Don't accept root's password. This option is for paranoids who -fear their peers might breakin using root's password and remove -their files anyway. Specifying this option on the command line -overrides the \fBxnlock.acceptRootPasswd\fP if set to True. -.TP -.BI \-ip -Ignore password prompt. -The resource available for this option is \fBxnlock.ignorePasswd\fP. -.TP -.BI \-noip -Don't ignore password prompt. This is available in order to -override the resource \fBignorePasswd\fP if set to True. -.TP -.BI -fg " color" -Specifies the foreground color. The resource available for this -is \fBxnlock.foreground\fP. -.TP -.BI -bg " color" -Specifies the background color. The resource available for this -is \fBxnlock.background\fP. -.TP -.BI \-rv -Reverse the foreground and background colors. -The resource for this is \fBxvnlock.reverseVideo\fP. -.TP -.BI \-norv -Don't use reverse video. This is available to override the reverseVideo -resource if set to True. -.TP -.BI \-prog " program" -Receive message text from the running program \fIprogram\fP. If there -are arguments to \fIprogram\fP, encase them with the name of the program in -quotes (e.g. xnlock -t "fortune -o"). -The resource for this is \fBxnlock.program\fP. -.SH RESOURCES -.br -xnlock.font: fontname -.br -xnlock.foreground: color -.br -xnlock.background: color -.br -xnlock.reverseVideo: True/False -.br -xnlock.text: Some random text string -.br -xnlock.program: program [args] -.br -xnlock.ignorePasswd: True/False -.br -xnlock.acceptRootPasswd: True/False -.SH FILES -\fIxnlock\fP executable file -.br -~/.msgfile default message file -.SH AUTHOR -Dan Heller Copyright (c) 1985, 1990. -.br -The original version of this program was written using pixrects on -a Sun 2 running SunOS 1.1. diff --git a/crypto/heimdal/appl/xnlock/xnlock.c b/crypto/heimdal/appl/xnlock/xnlock.c deleted file mode 100644 index acfff2f..0000000 --- a/crypto/heimdal/appl/xnlock/xnlock.c +++ /dev/null @@ -1,1135 +0,0 @@ -/* - * xnlock -- Dan Heller, 1990 - * "nlock" is a "new lockscreen" type program... something that prevents - * screen burnout by making most of it "black" while providing something - * of interest to be displayed in case anyone is watching. - * "xnlock" is the X11 version of the program. - * Original sunview version written by Dan Heller 1985 (not included here). - */ -#ifdef HAVE_CONFIG_H -#include -RCSID("$Id: xnlock.c,v 1.90 2002/08/23 19:29:38 assar Exp $"); -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef strerror -#undef strerror -#endif -#include -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_PWD_H -#include -#endif - -#ifdef KRB5 -#include -#endif -#ifdef KRB4 -#include -#include -#endif - -#include -#include - -static char login[16]; -static char userprompt[128]; -#ifdef KRB4 -static char name[ANAME_SZ]; -static char inst[INST_SZ]; -static char realm[REALM_SZ]; -#endif -#ifdef KRB5 -static krb5_context context; -static krb5_principal client; -#endif - -#define font_height(font) (font->ascent + font->descent) - -static char *SPACE_STRING = " "; -static char STRING[] = "****************"; - -#define STRING_LENGTH (sizeof(STRING)) -#define MAX_PASSWD_LENGTH 256 -/* (sizeof(STRING)) */ - -#define PROMPT "Password: " -#define FAIL_MSG "Sorry, try again" -#define LEFT 001 -#define RIGHT 002 -#define DOWN 004 -#define UP 010 -#define FRONT 020 -#define X_INCR 3 -#define Y_INCR 2 -#define XNLOCK_CTRL 1 -#define XNLOCK_NOCTRL 0 - -static XtAppContext app; -static Display *dpy; -static unsigned short Width, Height; -static Widget widget; -static GC gc; -static XtIntervalId timeout_id; -static char *words; -static int x, y; -static Pixel Black, White; -static XFontStruct *font; -static char root_cpass[128]; -static char user_cpass[128]; -static int time_left, prompt_x, prompt_y, time_x, time_y; -static unsigned long interval; -static Pixmap left0, left1, right0, right1, left_front, - right_front, front, down; - -#define MAXLINES 40 - -#define IS_MOVING 1 -#define GET_PASSWD 2 -static int state; /* indicates states: walking or getting passwd */ - -static int ALLOW_LOGOUT = (60*10); /* Allow logout after nn seconds */ -#define LOGOUT_PASSWD "enuHDmTo5Lq4g" /* when given password "LOGOUT" */ -static time_t locked_at; - -struct appres_t { - Pixel bg; - Pixel fg; - XFontStruct *font; - Boolean ignore_passwd; - Boolean do_reverse; - Boolean accept_root; - char *text, *text_prog, *file, *logoutPasswd; - Boolean no_screensaver; - Boolean destroytickets; -} appres; - -static XtResource resources[] = { - { XtNbackground, XtCBackground, XtRPixel, sizeof(Pixel), - XtOffsetOf(struct appres_t, bg), XtRString, "black" }, - - { XtNforeground, XtCForeground, XtRPixel, sizeof(Pixel), - XtOffsetOf(struct appres_t, fg), XtRString, "white" }, - - { XtNfont, XtCFont, XtRFontStruct, sizeof (XFontStruct *), - XtOffsetOf(struct appres_t, font), - XtRString, "-*-new century schoolbook-*-*-*-18-*" }, - - { "ignorePasswd", "IgnorePasswd", XtRBoolean, sizeof(Boolean), - XtOffsetOf(struct appres_t,ignore_passwd),XtRImmediate,(XtPointer)False }, - - { "acceptRootPasswd", "AcceptRootPasswd", XtRBoolean, sizeof(Boolean), - XtOffsetOf(struct appres_t, accept_root), XtRImmediate, (XtPointer)True }, - - { "text", "Text", XtRString, sizeof(String), - XtOffsetOf(struct appres_t, text), XtRString, "I'm out running around." }, - - { "program", "Program", XtRString, sizeof(String), - XtOffsetOf(struct appres_t, text_prog), XtRImmediate, NULL }, - - { "file", "File", XtRString, sizeof(String), - XtOffsetOf(struct appres_t,file), XtRImmediate, NULL }, - - { "logoutPasswd", "logoutPasswd", XtRString, sizeof(String), - XtOffsetOf(struct appres_t, logoutPasswd), XtRString, LOGOUT_PASSWD }, - - { "noScreenSaver", "NoScreenSaver", XtRBoolean, sizeof(Boolean), - XtOffsetOf(struct appres_t,no_screensaver), XtRImmediate, (XtPointer)True }, - - { "destroyTickets", "DestroyTickets", XtRBoolean, sizeof(Boolean), - XtOffsetOf(struct appres_t,destroytickets), XtRImmediate, (XtPointer)True }, -}; - -static XrmOptionDescRec options[] = { - { "-fg", ".foreground", XrmoptionSepArg, NULL }, - { "-foreground", ".foreground", XrmoptionSepArg, NULL }, - { "-fn", ".font", XrmoptionSepArg, NULL }, - { "-font", ".font", XrmoptionSepArg, NULL }, - { "-ip", ".ignorePasswd", XrmoptionNoArg, "True" }, - { "-noip", ".ignorePasswd", XrmoptionNoArg, "False" }, - { "-ar", ".acceptRootPasswd", XrmoptionNoArg, "True" }, - { "-noar", ".acceptRootPasswd", XrmoptionNoArg, "False" }, - { "-nonoscreensaver", ".noScreenSaver", XrmoptionNoArg, "False" }, - { "-nodestroytickets", ".destroyTickets", XrmoptionNoArg, "False" }, -}; - -static char* -get_words(void) -{ - FILE *pp = NULL; - static char buf[512]; - long n; - - if (appres.text_prog) { - pp = popen(appres.text_prog, "r"); - if (!pp) { - warn("popen %s", appres.text_prog); - return appres.text; - } - n = fread(buf, 1, sizeof(buf) - 1, pp); - buf[n] = 0; - pclose(pp); - return buf; - } - if (appres.file) { - pp = fopen(appres.file, "r"); - if (!pp) { - warn("fopen %s", appres.file); - return appres.text; - } - n = fread(buf, 1, sizeof(buf) - 1, pp); - buf[n] = 0; - fclose(pp); - return buf; - } - - return appres.text; -} - -static void -usage(void) -{ - fprintf(stderr, "usage: %s [options] [message]\n", getprogname()); - fprintf(stderr, "-fg color foreground color\n"); - fprintf(stderr, "-bg color background color\n"); - fprintf(stderr, "-rv reverse foreground/background colors\n"); - fprintf(stderr, "-nrv no reverse video\n"); - fprintf(stderr, "-ip ignore passwd\n"); - fprintf(stderr, "-nip don't ignore passwd\n"); - fprintf(stderr, "-ar accept root's passwd to unlock\n"); - fprintf(stderr, "-nar don't accept root's passwd\n"); - fprintf(stderr, "-f [file] message is read from file or ~/.msgfile\n"); - fprintf(stderr, "-prog program text is gotten from executing `program'\n"); - fprintf(stderr, "-nodestroytickets keep kerberos tickets\n"); - exit(1); -} - -static void -init_words (int argc, char **argv) -{ - int i = 0; - - while(argv[i]) { - if(strcmp(argv[i], "-p") == 0 - || strcmp(argv[i], "-prog") == 0) { - i++; - if(argv[i]) { - appres.text_prog = argv[i]; - i++; - } else { - warnx ("-p requires an argument"); - usage(); - } - } else if(strcmp(argv[i], "-f") == 0) { - i++; - if(argv[i]) { - appres.file = argv[i]; - i++; - } else { - asprintf (&appres.file, - "%s/.msgfile", getenv("HOME")); - if (appres.file == NULL) - errx (1, "cannot allocate memory for message"); - } - } else if(strcmp(argv[i], "--version") == 0) { - print_version(NULL); - exit(0); - } else { - int j; - int len = 1; - for(j = i; argv[j]; j++) - len += strlen(argv[j]) + 1; - appres.text = malloc(len); - if (appres.text == NULL) - errx (1, "cannot allocate memory for message"); - appres.text[0] = 0; - for(; i < j; i++){ - strlcat(appres.text, argv[i], len); - strlcat(appres.text, " ", len); - } - } - } -} - -static void -ScreenSaver(int save) -{ - static int timeout, interval, prefer_blank, allow_exp; - if(!appres.no_screensaver){ - if (save) { - XGetScreenSaver(dpy, &timeout, &interval, - &prefer_blank, &allow_exp); - XSetScreenSaver(dpy, 0, interval, prefer_blank, allow_exp); - } else - /* restore state */ - XSetScreenSaver(dpy, timeout, interval, prefer_blank, allow_exp); - } -} - -/* Forward decls necessary */ -static void talk(int force_erase); -static unsigned long look(void); - -static int -zrefresh(void) -{ - switch (fork()) { - case -1: - warn ("zrefresh: fork"); - return -1; - case 0: - /* Child */ - execlp("zrefresh", "zrefresh", 0); - execl(BINDIR "/zrefresh", "zrefresh", 0); - return -1; - default: - /* Parent */ - break; - } - return 0; -} - -static void -leave(void) -{ - XUngrabPointer(dpy, CurrentTime); - XUngrabKeyboard(dpy, CurrentTime); - ScreenSaver(0); - XCloseDisplay(dpy); - zrefresh(); - exit(0); -} - -static void -walk(int dir) -{ - int incr = 0; - static int lastdir; - static int up = 1; - static Pixmap frame; - - XSetForeground(dpy, gc, White); - XSetBackground(dpy, gc, Black); - if (dir & (LEFT|RIGHT)) { /* left/right movement (mabye up/down too) */ - up = -up; /* bouncing effect (even if hit a wall) */ - if (dir & LEFT) { - incr = X_INCR; - frame = (up < 0) ? left0 : left1; - } else { - incr = -X_INCR; - frame = (up < 0) ? right0 : right1; - } - if ((lastdir == FRONT || lastdir == DOWN) && dir & UP) { - /* workaround silly bug that leaves screen dust when - * guy is facing forward or down and moves up-left/right. - */ - XCopyPlane(dpy, frame, XtWindow(widget), gc, 0, 0, 64,64, x, y, 1L); - XFlush(dpy); - } - /* note that maybe neither UP nor DOWN is set! */ - if (dir & UP && y > Y_INCR) - y -= Y_INCR; - else if (dir & DOWN && y < (int)Height - 64) - y += Y_INCR; - } - /* Explicit up/down movement only (no left/right) */ - else if (dir == UP) - XCopyPlane(dpy, front, XtWindow(widget), gc, - 0,0, 64,64, x, y -= Y_INCR, 1L); - else if (dir == DOWN) - XCopyPlane(dpy, down, XtWindow(widget), gc, - 0,0, 64,64, x, y += Y_INCR, 1L); - else if (dir == FRONT && frame != front) { - if (up > 0) - up = -up; - if (lastdir & LEFT) - frame = left_front; - else if (lastdir & RIGHT) - frame = right_front; - else - frame = front; - XCopyPlane(dpy, frame, XtWindow(widget), gc, 0, 0, 64,64, x, y, 1L); - } - if (dir & LEFT) - while(--incr >= 0) { - XCopyPlane(dpy, frame, XtWindow(widget), gc, - 0,0, 64,64, --x, y+up, 1L); - XFlush(dpy); - } - else if (dir & RIGHT) - while(++incr <= 0) { - XCopyPlane(dpy, frame, XtWindow(widget), gc, - 0,0, 64,64, ++x, y+up, 1L); - XFlush(dpy); - } - lastdir = dir; -} - -static long -my_random (void) -{ -#ifdef HAVE_RANDOM - return random(); -#else - return rand(); -#endif -} - -static int -think(void) -{ - if (my_random() & 1) - walk(FRONT); - if (my_random() & 1) { - words = get_words(); - return 1; - } - return 0; -} - -static void -move(XtPointer _p, XtIntervalId *_id) -{ - static int length, dir; - - if (!length) { - int tries = 0; - dir = 0; - if ((my_random() & 1) && think()) { - talk(0); /* sets timeout to itself */ - return; - } - if (!(my_random() % 3) && (interval = look())) { - timeout_id = XtAppAddTimeOut(app, interval, move, NULL); - return; - } - interval = 20 + my_random() % 100; - do { - if (!tries) - length = Width/100 + my_random() % 90, tries = 8; - else - tries--; - switch (my_random() % 8) { - case 0: - if (x - X_INCR*length >= 5) - dir = LEFT; - case 1: - if (x + X_INCR*length <= (int)Width - 70) - dir = RIGHT; - case 2: - if (y - (Y_INCR*length) >= 5) - dir = UP, interval = 40; - case 3: - if (y + Y_INCR*length <= (int)Height - 70) - dir = DOWN, interval = 20; - case 4: - if (x - X_INCR*length >= 5 && y - (Y_INCR*length) >= 5) - dir = (LEFT|UP); - case 5: - if (x + X_INCR * length <= (int)Width - 70 && - y-Y_INCR * length >= 5) - dir = (RIGHT|UP); - case 6: - if (x - X_INCR * length >= 5 && - y + Y_INCR * length <= (int)Height - 70) - dir = (LEFT|DOWN); - case 7: - if (x + X_INCR*length <= (int)Width - 70 && - y + Y_INCR*length <= (int)Height - 70) - dir = (RIGHT|DOWN); - } - } while (!dir); - } - walk(dir); - --length; - timeout_id = XtAppAddTimeOut(app, interval, move, NULL); -} - -static void -post_prompt_box(Window window) -{ - int width = (Width / 3); - int height = font_height(font) * 6; - int box_x, box_y; - - /* make sure the entire nose icon fits in the box */ - if (height < 100) - height = 100; - - if(width < 105 + font->max_bounds.width*STRING_LENGTH) - width = 105 + font->max_bounds.width*STRING_LENGTH; - box_x = (Width - width) / 2; - time_x = prompt_x = box_x + 105; - - time_y = prompt_y = Height / 2; - box_y = prompt_y - 3 * font_height(font); - - /* erase current guy -- text message may still exist */ - XSetForeground(dpy, gc, Black); - XFillRectangle(dpy, window, gc, x, y, 64, 64); - talk(1); /* forcefully erase message if one is being displayed */ - /* Clear area in middle of screen for prompt box */ - XSetForeground(dpy, gc, White); - XFillRectangle(dpy, window, gc, box_x, box_y, width, height); - - /* make a box that's 5 pixels thick. Then add a thin box inside it */ - XSetForeground(dpy, gc, Black); - XSetLineAttributes(dpy, gc, 5, 0, 0, 0); - XDrawRectangle(dpy, window, gc, box_x+5, box_y+5, width-10, height-10); - XSetLineAttributes(dpy, gc, 0, 0, 0, 0); - XDrawRectangle(dpy, window, gc, box_x+12, box_y+12, width-23, height-23); - - XDrawString(dpy, window, gc, - prompt_x, prompt_y-font_height(font), - userprompt, strlen(userprompt)); - XDrawString(dpy, window, gc, prompt_x, prompt_y, PROMPT, strlen(PROMPT)); - /* set background for copyplane and DrawImageString; need reverse video */ - XSetBackground(dpy, gc, White); - XCopyPlane(dpy, right0, window, gc, 0,0, 64,64, - box_x + 20, box_y + (height - 64)/2, 1L); - prompt_x += XTextWidth(font, PROMPT, strlen(PROMPT)); - time_y += 2*font_height(font); -} - -static void -RaiseWindow(Widget w, XEvent *ev, String *s, Cardinal *n) -{ - Widget x; - if(!XtIsRealized(w)) - return; - x = XtParent(w); - XRaiseWindow(dpy, XtWindow(x)); -} - - -static void -ClearWindow(Widget w, XEvent *_event, String *_s, Cardinal *_n) -{ - XExposeEvent *event = (XExposeEvent *)_event; - if (!XtIsRealized(w)) - return; - XClearArea(dpy, XtWindow(w), event->x, event->y, - event->width, event->height, False); - if (state == GET_PASSWD) - post_prompt_box(XtWindow(w)); - if (timeout_id == 0 && event->count == 0) { - timeout_id = XtAppAddTimeOut(app, 1000L, move, NULL); - /* first grab the input focus */ - XSetInputFocus(dpy, XtWindow(w), RevertToPointerRoot, CurrentTime); - /* now grab the pointer and keyboard and contrain to this window */ - XGrabPointer(dpy, XtWindow(w), TRUE, 0, GrabModeAsync, - GrabModeAsync, XtWindow(w), None, CurrentTime); - } -} - -static void -countdown(XtPointer _t, XtIntervalId *_d) -{ - int *timeout = (int *)_t; - char buf[128]; - time_t seconds; - - if (--(*timeout) < 0) { - XExposeEvent event; - XtRemoveTimeOut(timeout_id); - state = IS_MOVING; - event.x = event.y = 0; - event.width = Width, event.height = Height; - ClearWindow(widget, (XEvent *)&event, 0, 0); - timeout_id = XtAppAddTimeOut(app, 200L, move, NULL); - return; - } - seconds = time(0) - locked_at; - if (seconds >= 3600) - snprintf(buf, sizeof(buf), - "Locked for %d:%02d:%02d ", - (int)seconds/3600, (int)seconds/60%60, (int)seconds%60); - else - snprintf(buf, sizeof(buf), - "Locked for %2d:%02d ", - (int)seconds/60, (int)seconds%60); - - XDrawImageString(dpy, XtWindow(widget), gc, - time_x, time_y, buf, strlen(buf)); - XtAppAddTimeOut(app, 1000L, countdown, timeout); - return; -} - -#ifdef KRB5 -static int -verify_krb5(const char *password) -{ - krb5_error_code ret; - krb5_ccache id; - - krb5_cc_default(context, &id); - ret = krb5_verify_user(context, - client, - id, - password, - 0, - NULL); - if (ret == 0){ -#ifdef KRB4 - if (krb5_config_get_bool(context, NULL, - "libdefaults", - "krb4_get_tickets", - NULL)) { - CREDENTIALS c; - krb5_creds mcred, cred; - - krb5_make_principal(context, &mcred.server, - client->realm, - "krbtgt", - client->realm, - NULL); - ret = krb5_cc_retrieve_cred(context, id, 0, &mcred, &cred); - if(ret == 0) { - ret = krb524_convert_creds_kdc_ccache(context, id, &cred, &c); - if(ret == 0) - tf_setup(&c, c.pname, c.pinst); - memset(&c, 0, sizeof(c)); - krb5_free_creds_contents(context, &cred); - } - krb5_free_principal(context, mcred.server); - } - if (k_hasafs()) - krb5_afslog(context, id, NULL, NULL); -#endif - return 0; - } - if (ret != KRB5KRB_AP_ERR_MODIFIED) - krb5_warn(context, ret, "verify_krb5"); - - return -1; -} -#endif - -static int -verify(char *password) -{ - int ret; - - /* - * First try with root password, if allowed. - */ - if ( appres.accept_root - && strcmp(crypt(password, root_cpass), root_cpass) == 0) - return 0; - - /* - * Password that log out user - */ - if (getuid() != 0 && - geteuid() != 0 && - (time(0) - locked_at) > ALLOW_LOGOUT && - strcmp(crypt(password, appres.logoutPasswd), appres.logoutPasswd) == 0) - { - signal(SIGHUP, SIG_IGN); - kill(-1, SIGHUP); - sleep(5); - /* If the X-server shut down then so will we, else - * continue */ - signal(SIGHUP, SIG_DFL); - } - - /* - * Try copy of users password. - */ - if (strcmp(crypt(password, user_cpass), user_cpass) == 0) - return 0; - - /* - * Try to verify as user in case password change. - */ - if (unix_verify_user(login, password) == 0) - return 0; - -#ifdef KRB5 - /* - * Try to verify as user with kerberos 5. - */ - if(verify_krb5(password) == 0) - return 0; -#endif - -#ifdef KRB4 - /* - * Try to verify as user with kerberos 4. - */ - ret = krb_verify_user(name, inst, realm, password, - KRB_VERIFY_NOT_SECURE, NULL); - if (ret == KSUCCESS){ - if (k_hasafs()) - krb_afslog(NULL, NULL); - return 0; - } - if (ret != INTK_BADPW) - warnx ("warning: %s", - (ret < 0) ? strerror(ret) : krb_get_err_text(ret)); -#endif - - return -1; -} - - -static void -GetPasswd(Widget w, XEvent *_event, String *_s, Cardinal *_n) -{ - XKeyEvent *event = (XKeyEvent *)_event; - static char passwd[MAX_PASSWD_LENGTH]; - static int cnt; - static int is_ctrl = XNLOCK_NOCTRL; - char c; - KeySym keysym; - int echolen; - int old_state = state; - - if (event->type == ButtonPress) { - x = event->x, y = event->y; - return; - } - if (state == IS_MOVING) { - /* guy is running around--change to post prompt box. */ - XtRemoveTimeOut(timeout_id); - state = GET_PASSWD; - if (appres.ignore_passwd || !strlen(user_cpass)) - leave(); - post_prompt_box(XtWindow(w)); - cnt = 0; - time_left = 30; - countdown((XtPointer)&time_left, 0); - } - if (event->type == KeyRelease) { - keysym = XLookupKeysym(event, 0); - if (keysym == XK_Control_L || keysym == XK_Control_R) { - is_ctrl = XNLOCK_NOCTRL; - } - } - if (event->type != KeyPress) - return; - - time_left = 30; - - keysym = XLookupKeysym(event, 0); - if (keysym == XK_Control_L || keysym == XK_Control_R) { - is_ctrl = XNLOCK_CTRL; - return; - } - if (!XLookupString(event, &c, 1, &keysym, 0)) - return; - if (keysym == XK_Return || keysym == XK_Linefeed) { - passwd[cnt] = 0; - if(old_state == IS_MOVING) - return; - XtRemoveTimeOut(timeout_id); - - if(verify(passwd) == 0) - leave(); - - cnt = 0; - - XDrawImageString(dpy, XtWindow(widget), gc, - time_x, time_y, FAIL_MSG, strlen(FAIL_MSG)); - time_left = 0; - timeout_id = XtAppAddTimeOut(app, 2000L, countdown, &time_left); - return; - } - if (keysym == XK_BackSpace || keysym == XK_Delete || keysym == XK_Left) { - if (cnt) - passwd[cnt--] = ' '; - } else if (keysym == XK_u && is_ctrl == XNLOCK_CTRL) { - while (cnt) { - passwd[cnt--] = ' '; - echolen = min(cnt, STRING_LENGTH); - XDrawImageString(dpy, XtWindow(w), gc, - prompt_x, prompt_y, STRING, echolen); - XDrawImageString(dpy, XtWindow(w), gc, - prompt_x + XTextWidth(font, STRING, echolen), - prompt_y, SPACE_STRING, STRING_LENGTH - echolen + 1); - } - } else if (isprint(c)) { - if ((cnt + 1) >= MAX_PASSWD_LENGTH) - XBell(dpy, 50); - else - passwd[cnt++] = c; - } else - return; - echolen = min(cnt, STRING_LENGTH); - XDrawImageString(dpy, XtWindow(w), gc, - prompt_x, prompt_y, STRING, echolen); - XDrawImageString(dpy, XtWindow(w), gc, - prompt_x + XTextWidth(font, STRING, echolen), - prompt_y, SPACE_STRING, STRING_LENGTH - echolen +1); -} - -#include "nose.0.left" -#include "nose.1.left" -#include "nose.0.right" -#include "nose.1.right" -#include "nose.left.front" -#include "nose.right.front" -#include "nose.front" -#include "nose.down" - -static void -init_images(void) -{ - static Pixmap *images[] = { - &left0, &left1, &right0, &right1, - &left_front, &right_front, &front, &down - }; - static unsigned char *bits[] = { - nose_0_left_bits, nose_1_left_bits, nose_0_right_bits, - nose_1_right_bits, nose_left_front_bits, nose_right_front_bits, - nose_front_bits, nose_down_bits - }; - int i; - - for (i = 0; i < XtNumber(images); i++) - if (!(*images[i] = - XCreatePixmapFromBitmapData(dpy, DefaultRootWindow(dpy), - (char*)(bits[i]), 64, 64, 1, 0, 1))) - XtError("Can't load nose images"); -} - -static void -talk(int force_erase) -{ - int width = 0, height, Z, total = 0; - static int X, Y, talking; - static struct { int x, y, width, height; } s_rect; - char *p, *p2; - char buf[BUFSIZ], args[MAXLINES][256]; - - /* clear what we've written */ - if (talking || force_erase) { - if (!talking) - return; - if (talking == 2) { - XSetForeground(dpy, gc, Black); - XDrawString(dpy, XtWindow(widget), gc, X, Y, words, strlen(words)); - } else if (talking == 1) { - XSetForeground(dpy, gc, Black); - XFillRectangle(dpy, XtWindow(widget), gc, s_rect.x-5, s_rect.y-5, - s_rect.width+10, s_rect.height+10); - } - talking = 0; - if (!force_erase) - timeout_id = XtAppAddTimeOut(app, 40L, - (XtTimerCallbackProc)move, - NULL); - return; - } - XSetForeground(dpy, gc, White); - talking = 1; - walk(FRONT); - strlcpy (buf, words, sizeof(buf)); - p = buf; - - /* possibly avoid a lot of work here - * if no CR or only one, then just print the line - */ - if (!(p2 = strchr(p, '\n')) || !p2[1]) { - int w; - - if (p2) - *p2 = 0; - w = XTextWidth(font, words, strlen(words)); - X = x + 32 - w/2; - Y = y - 5 - font_height(font); - /* give us a nice 5 pixel margin */ - if (X < 5) - X = 5; - else if (X + w + 15 > (int)Width + 5) - X = Width - w - 5; - if (Y < 5) - Y = y + 64 + 5 + font_height(font); - XDrawString(dpy, XtWindow(widget), gc, X, Y, words, strlen(words)); - timeout_id = XtAppAddTimeOut(app, 5000L, (XtTimerCallbackProc)talk, - NULL); - talking++; - return; - } - - /* p2 now points to the first '\n' */ - for (height = 0; p; height++) { - int w; - *p2 = 0; - if ((w = XTextWidth(font, p, p2 - p)) > width) - width = w; - total += p2 - p; /* total chars; count to determine reading time */ - strlcpy(args[height], p, sizeof(args[height])); - if (height == MAXLINES - 1) { - puts("Message too long!"); - break; - } - p = p2+1; - if (!(p2 = strchr(p, '\n'))) - break; - } - height++; - - /* Figure out the height and width in pixels (height, width) extend - * the new box by 15 pixels on the sides (30 total) top and bottom. - */ - s_rect.width = width + 30; - s_rect.height = height * font_height(font) + 30; - if (x - s_rect.width - 10 < 5) - s_rect.x = 5; - else - if ((s_rect.x = x+32-(s_rect.width+15)/2) - + s_rect.width+15 > (int)Width-5) - s_rect.x = Width - 15 - s_rect.width; - if (y - s_rect.height - 10 < 5) - s_rect.y = y + 64 + 5; - else - s_rect.y = y - 5 - s_rect.height; - - XSetForeground(dpy, gc, White); - XFillRectangle(dpy, XtWindow(widget), gc, - s_rect.x-5, s_rect.y-5, s_rect.width+10, s_rect.height+10); - - /* make a box that's 5 pixels thick. Then add a thin box inside it */ - XSetForeground(dpy, gc, Black); - XSetLineAttributes(dpy, gc, 5, 0, 0, 0); - XDrawRectangle(dpy, XtWindow(widget), gc, - s_rect.x, s_rect.y, s_rect.width-1, s_rect.height-1); - XSetLineAttributes(dpy, gc, 0, 0, 0, 0); - XDrawRectangle(dpy, XtWindow(widget), gc, - s_rect.x + 7, s_rect.y + 7, s_rect.width - 15, - s_rect.height - 15); - - X = 15; - Y = 15 + font_height(font); - - /* now print each string in reverse order (start at bottom of box) */ - for (Z = 0; Z < height; Z++) { - XDrawString(dpy, XtWindow(widget), gc, s_rect.x+X, s_rect.y+Y, - args[Z], strlen(args[Z])); - Y += font_height(font); - } - timeout_id = XtAppAddTimeOut(app, (total/15) * 1000, - (XtTimerCallbackProc)talk, NULL); -} - -static unsigned long -look(void) -{ - XSetForeground(dpy, gc, White); - XSetBackground(dpy, gc, Black); - if (my_random() % 3) { - XCopyPlane(dpy, (my_random() & 1)? down : front, XtWindow(widget), gc, - 0, 0, 64,64, x, y, 1L); - return 1000L; - } - if (!(my_random() % 5)) - return 0; - if (my_random() % 3) { - XCopyPlane(dpy, (my_random() & 1)? left_front : right_front, - XtWindow(widget), gc, 0, 0, 64,64, x, y, 1L); - return 1000L; - } - if (!(my_random() % 5)) - return 0; - XCopyPlane(dpy, (my_random() & 1)? left0 : right0, XtWindow(widget), gc, - 0, 0, 64,64, x, y, 1L); - return 1000L; -} - -int -main (int argc, char **argv) -{ - int i; - Widget override; - XGCValues gcvalues; - - setprogname (argv[0]); - - /* - * Must be setuid root to read /etc/shadow, copy encrypted - * passwords here and then switch to sane uid. - */ - { - struct passwd *pw; - uid_t uid = getuid(); - if (!(pw = k_getpwuid(0))) - errx (1, "can't get root's passwd!"); - strlcpy(root_cpass, pw->pw_passwd, sizeof(root_cpass)); - - if (!(pw = k_getpwuid(uid))) - errx (1, "Can't get your password entry!"); - strlcpy(user_cpass, pw->pw_passwd, sizeof(user_cpass)); - setuid(uid); - if (uid != 0 && setuid(0) != -1) { - fprintf(stderr, "Failed to drop privileges!\n"); - exit(1); - } - /* Now we're no longer running setuid root. */ - strlcpy(login, pw->pw_name, sizeof(login)); - } - -#if defined(HAVE_SRANDOMDEV) - srandomdev(); -#elif defined(HAVE_RANDOM) - srandom(time(NULL)); -#else - srand (time(NULL)); -#endif - for (i = 0; i < STRING_LENGTH; i++) - STRING[i] = ((unsigned long)my_random() % ('~' - ' ')) + ' '; - - locked_at = time(0); - - snprintf(userprompt, sizeof(userprompt), "User: %s", login); -#ifdef KRB4 - krb_get_default_principal(name, inst, realm); - snprintf(userprompt, sizeof(userprompt), "User: %s", - krb_unparse_name_long(name, inst, realm)); -#endif -#ifdef KRB5 - { - krb5_error_code ret; - char *str; - - ret = krb5_init_context(&context); - if (ret) - errx (1, "krb5_init_context failed: %d", ret); - krb5_get_default_principal(context, &client); - krb5_unparse_name(context, client, &str); - snprintf(userprompt, sizeof(userprompt), "User: %s", str); - free(str); - } -#endif - - override = XtVaAppInitialize(&app, "XNlock", options, XtNumber(options), - (Cardinal*)&argc, argv, NULL, - XtNoverrideRedirect, True, - NULL); - - XtVaGetApplicationResources(override,(XtPointer)&appres, - resources,XtNumber(resources), - NULL); - /* the background is black and the little guy is white */ - Black = appres.bg; - White = appres.fg; - - if (appres.destroytickets) { -#ifdef KRB4 - int fd; - - dest_tkt(); /* Nuke old ticket file */ - /* but keep a place holder */ - fd = open (TKT_FILE, O_WRONLY | O_CREAT | O_EXCL, 0600); - if (fd >= 0) - close (fd); -#endif - } - - dpy = XtDisplay(override); - - if (dpy == 0) - errx (1, "Error: Can't open display"); - - Width = DisplayWidth(dpy, DefaultScreen(dpy)) + 2; - Height = DisplayHeight(dpy, DefaultScreen(dpy)) + 2; - - for(i = 0; i < ScreenCount(dpy); i++){ - Widget shell, core; - - struct xxx{ - Pixel bg; - }res; - - XtResource Res[] = { - { XtNbackground, XtCBackground, XtRPixel, sizeof(Pixel), - XtOffsetOf(struct xxx, bg), XtRString, "black" } - }; - - if(i == DefaultScreen(dpy)) - continue; - - shell = XtVaAppCreateShell(NULL,NULL, applicationShellWidgetClass, dpy, - XtNscreen, ScreenOfDisplay(dpy, i), - XtNoverrideRedirect, True, - XtNx, -1, - XtNy, -1, - NULL); - - XtVaGetApplicationResources(shell, (XtPointer)&res, - Res, XtNumber(Res), - NULL); - - core = XtVaCreateManagedWidget("_foo", widgetClass, shell, - XtNwidth, DisplayWidth(dpy, i), - XtNheight, DisplayHeight(dpy, i), - XtNbackground, res.bg, - NULL); - XtRealizeWidget(shell); - } - - widget = XtVaCreateManagedWidget("_foo", widgetClass, override, - XtNwidth, Width, - XtNheight, Height, - XtNbackground, Black, - NULL); - - init_words(--argc, ++argv); - init_images(); - - gcvalues.foreground = Black; - gcvalues.background = White; - - - font = appres.font; - gcvalues.font = font->fid; - gcvalues.graphics_exposures = False; - gc = XCreateGC(dpy, DefaultRootWindow(dpy), - GCForeground | GCBackground | GCGraphicsExposures | GCFont, - &gcvalues); - - x = Width / 2; - y = Height / 2; - srand (time(0)); - state = IS_MOVING; - - { - static XtActionsRec actions[] = { - { "ClearWindow", ClearWindow }, - { "GetPasswd", GetPasswd }, - { "RaiseWindow", RaiseWindow }, - }; - XtAppAddActions(app, actions, XtNumber(actions)); - XtOverrideTranslations(widget, - XtParseTranslationTable( - ": ClearWindow() \n" - ": GetPasswd() \n" - ": RaiseWindow() \n" - ": GetPasswd() \n" - ": GetPasswd()")); - } - - XtRealizeWidget(override); - if((i = XGrabPointer(dpy, XtWindow(widget), True, 0, GrabModeAsync, - GrabModeAsync, XtWindow(widget), - None, CurrentTime)) != 0) - errx(1, "Failed to grab pointer (%d)", i); - - if((i = XGrabKeyboard(dpy, XtWindow(widget), True, GrabModeAsync, - GrabModeAsync, CurrentTime)) != 0) - errx(1, "Failed to grab keyboard (%d)", i); - ScreenSaver(1); - XtAppMainLoop(app); - exit(0); -} - diff --git a/crypto/heimdal/appl/xnlock/xnlock.cat1 b/crypto/heimdal/appl/xnlock/xnlock.cat1 deleted file mode 100644 index d358eee..0000000 --- a/crypto/heimdal/appl/xnlock/xnlock.cat1 +++ /dev/null @@ -1,123 +0,0 @@ -XNLOCK(1L) XNLOCK(1L) - - - -NNAAMMEE - xnlock - amusing lock screen program with message for - passers-by - -SSYYNNOOPPSSIISS - xxnnlloocckk [ _o_p_t_i_o_n_s ] [ _m_e_s_s_a_g_e ] - -DDEESSCCRRIIPPTTIIOONN - _x_n_l_o_c_k is a program that acts as a screen saver for work- - stations running X11. It also "locks" the screen such - that the workstation can be left unattended without worry - that someone else will walk up to it and mess everything - up. When _x_n_l_o_c_k is running, a little man with a big nose - and a hat runs around spewing out messages to the screen. - By default, the messages are "humorous", but that depends - on your sense of humor. - - If a key or mouse button is pressed, a prompt is printed - requesting the user's password. If a RETURN is not typed - within 30 seconds, the little man resumes running around. - - Text on the command line is used as the message. For - example: - % xnlock I'm out to lunch for a couple of hours. - Note the need to quote shell metacharacters. - - In the absence of flags or text, _x_n_l_o_c_k displays random - fortunes. - -OOPPTTIIOONNSS - Command line options override all resource specifications. - All arguments that are not associated with a command line - option is taken to be message text that the little man - will "say" every once in a while. The resource - xxnnlloocckk..tteexxtt may be set to a string. - - --ffnn _f_o_n_t_n_a_m_e - The default font is the first 18 point font in the - _n_e_w _c_e_n_t_u_r_y _s_c_h_o_o_l_b_o_o_k family. While larger fonts - are recokmmended over smaller ones, any font in the - server's font list will work. The resource to use - for this option is xxnnlloocckk..ffoonntt. - - --ffiilleennaammee _f_i_l_e_n_a_m_e - Take the message to be displayed from the file - _f_i_l_e_n_a_m_e. If _f_i_l_e_n_a_m_e is not specified, - _$_H_O_M_E_/_._m_s_g_f_i_l_e is used. If the contents of the - file are changed during runtime, the most recent - text of the file is used (allowing the displayed - message to be altered remotely). Carriage returns - within the text are allowed, but tabs or other con- - trol characters are not translated and should not - be used. The resource available for this option is - xxnnlloocckk..ffiillee. - - --aarr Accept root's password to unlock screen. This - option is true by default. The reason for this is - so that someone's screen may be unlocked by autor- - ized users in case of emergency and the person run- - ning the program is still out to lunch. The - resource available for specifying this option is - xxnnlloocckk..aacccceeppttRRoooottPPaasssswwdd. - - --nnooaarr Don't accept root's password. This option is for - paranoids who fear their peers might breakin using - root's password and remove their files anyway. - Specifying this option on the command line over- - rides the xxnnlloocckk..aacccceeppttRRoooottPPaasssswwdd if set to True. - - --iipp Ignore password prompt. The resource available for - this option is xxnnlloocckk..iiggnnoorreePPaasssswwdd. - - --nnooiipp Don't ignore password prompt. This is available in - order to override the resource iiggnnoorreePPaasssswwdd if set - to True. - - --ffgg _c_o_l_o_r - Specifies the foreground color. The resource - available for this is xxnnlloocckk..ffoorreeggrroouunndd. - - --bbgg _c_o_l_o_r - Specifies the background color. The resource - available for this is xxnnlloocckk..bbaacckkggrroouunndd. - - --rrvv Reverse the foreground and background colors. The - resource for this is xxvvnnlloocckk..rreevveerrsseeVViiddeeoo. - - --nnoorrvv Don't use reverse video. This is available to - override the reverseVideo resource if set to True. - - --pprroogg _p_r_o_g_r_a_m - Receive message text from the running program _p_r_o_- - _g_r_a_m. If there are arguments to _p_r_o_g_r_a_m, encase - them with the name of the program in quotes (e.g. - xnlock -t "fortune -o"). The resource for this is - xxnnlloocckk..pprrooggrraamm. - -RREESSOOUURRCCEESS - xnlock.font: fontname - xnlock.foreground: color - xnlock.background: color - xnlock.reverseVideo: True/False - xnlock.text: Some random text string - xnlock.program: program [args] - xnlock.ignorePasswd: True/False - xnlock.acceptRootPasswd: True/False - -FFIILLEESS - _x_n_l_o_c_k executable file - ~/.msgfile default message file - -AAUUTTHHOORR - Dan Heller Copyright (c) 1985, 1990. - The original version of this program was written using - pixrects on a Sun 2 running SunOS 1.1. - - - - 19 April 1990 XNLOCK(1L) diff --git a/crypto/heimdal/lib/editline/ChangeLog b/crypto/heimdal/lib/editline/ChangeLog deleted file mode 100644 index 3773f8c..0000000 --- a/crypto/heimdal/lib/editline/ChangeLog +++ /dev/null @@ -1,108 +0,0 @@ -2002-08-22 Assar Westerlund - - * testit.c: make it use getarg so that it can handle --help and - --version (and thus make check can pass) - -2001-09-13 Assar Westerlund - - * editline.c: rename STATUS -> el_STATUS to avoid conflict with - STATUS in arpa/nameser.h - -2000-11-15 Assar Westerlund - - * Makefile.am: make libeditline and libel_compat into libtool - libraries but always make them static - -2000-03-01 Assar Westerlund - - * edit_compat.c (readline): be more liberal in what we accept from - el_gets. if count == 0 -> interpret it as EOF. also copy the - string first and then cut of the newline, it's cleaner - -1999-12-23 Assar Westerlund - - * editline.c (TTYinfo): add fallback if we fail to find "le" in - termcap. - -1999-08-06 Assar Westerlund - - * editline.c (TTYinfo): copy backspace string to avoid referencing - into a local variable. - -1999-08-04 Assar Westerlund - - * Makefile.am: don't run testit in `make check' - -1999-04-11 Assar Westerlund - - * Makefile.am: don't run testit as a check - -Sat Apr 10 23:01:18 1999 Johan Danielsson - - * complete.c (rl_complete_filename): return if there were no - matches - -Thu Apr 8 15:08:25 1999 Johan Danielsson - - * Makefile.in: snprintf - - * roken_rename.h: add snprintf, asprintf - - * Makefile.am: build testit - - * complete.c: nuke NEW, DISPOSE, RENEW, and COPYFROMTO macros; - (rl_complete): call rl_list_possib instead of doing the same - - * editline.h: nuke NEW, DISPOSE, RENEW, and COPYFROMTO macros - - * editline.c: nuke NEW, DISPOSE, RENEW, and COPYFROMTO macros - - * sysunix.c: add some whitespace - -Thu Mar 18 11:22:55 1999 Johan Danielsson - - * Makefile.am: include Makefile.am.common - -Tue Mar 16 17:10:34 1999 Johan Danielsson - - * editline.c: remove protos for read/write - -Sat Mar 13 22:23:22 1999 Assar Westerlund - - * : add - -Sun Nov 22 10:40:28 1998 Assar Westerlund - - * Makefile.in (WFLAGS): set - -Tue Sep 29 02:09:15 1998 Assar Westerlund - - * Makefile.in (LIB_DEPS): add LIB_tgetent - -Thu Jul 2 15:10:08 1998 Johan Danielsson - - * edit_compat.c: support for newer libedit - -Tue Jun 30 17:18:09 1998 Assar Westerlund - - * Makefile.in (distclean): don't remove roken_rename.h - -Fri May 29 19:03:38 1998 Assar Westerlund - - * Makefile.in (strdup.c): remove dependency - -Mon May 25 05:25:16 1998 Assar Westerlund - - * Makefile.in (clean): try to remove shared library debris - -Sun Apr 19 09:53:46 1998 Assar Westerlund - - * Makefile.in: add symlink magic for linux - -Sat Feb 7 07:24:30 1998 Assar Westerlund - - * editline.h: add prototypes - -Tue Feb 3 10:24:22 1998 Johan Danielsson - - * editline.c: If read returns EINTR, try again. diff --git a/crypto/heimdal/lib/editline/Makefile b/crypto/heimdal/lib/editline/Makefile deleted file mode 100644 index 793c7e6..0000000 --- a/crypto/heimdal/lib/editline/Makefile +++ /dev/null @@ -1,730 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# lib/editline/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.13 2002/08/13 13:48:15 joda Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(ROKEN_RENAME) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -ES = snprintf.c strdup.c - -man_MANS = editline.3 - -lib_LTLIBRARIES = libeditline.la -noinst_LTLIBRARIES = libel_compat.la -#noinst_LTLIBRARIES = - -noinst_PROGRAMS = testit - -CHECK_LOCAL = - -testit_LDADD = \ - libeditline.la \ - $(LIB_tgetent) \ - $(LIB_roken) - - -include_HEADERS = editline.h - -libeditline_la_SOURCES = \ - complete.c \ - editline.c \ - sysunix.c \ - editline.h \ - roken_rename.h \ - unix.h \ - $(EXTRA_SOURCE) - - -libeditline_la_LDFLAGS = -static - -EXTRA_SOURCE = $(ES) - -libel_compat_la_SOURCES = edit_compat.c - -libel_compat_la_LDFLAGS = -static - -EXTRA_DIST = $(man_MANS) -subdir = lib/editline -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) - -libeditline_la_LIBADD = -am__objects_1 = snprintf.lo strdup.lo -am__objects_2 = $(am__objects_1) -am_libeditline_la_OBJECTS = complete.lo editline.lo sysunix.lo \ - $(am__objects_2) -libeditline_la_OBJECTS = $(am_libeditline_la_OBJECTS) -libel_compat_la_LIBADD = -am_libel_compat_la_OBJECTS = edit_compat.lo -libel_compat_la_OBJECTS = $(am_libel_compat_la_OBJECTS) -noinst_PROGRAMS = testit$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -testit_SOURCES = testit.c -testit_OBJECTS = testit.$(OBJEXT) -testit_DEPENDENCIES = libeditline.la -testit_LDFLAGS = - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = $(libeditline_la_SOURCES) $(libel_compat_la_SOURCES) \ - testit.c -MANS = $(man_MANS) -HEADERS = $(include_HEADERS) - -DIST_COMMON = README $(include_HEADERS) ChangeLog Makefile.am \ - Makefile.in -SOURCES = $(libeditline_la_SOURCES) $(libel_compat_la_SOURCES) testit.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign lib/editline/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libLTLIBRARIES_INSTALL = $(INSTALL) -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libdir) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ - else :; fi; \ - done - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libeditline.la: $(libeditline_la_OBJECTS) $(libeditline_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libeditline_la_LDFLAGS) $(libeditline_la_OBJECTS) $(libeditline_la_LIBADD) $(LIBS) -libel_compat.la: $(libel_compat_la_OBJECTS) $(libel_compat_la_DEPENDENCIES) - $(LINK) $(libel_compat_la_LDFLAGS) $(libel_compat_la_OBJECTS) $(libel_compat_la_LIBADD) $(LIBS) - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -testit$(EXEEXT): $(testit_OBJECTS) $(testit_DEPENDENCIES) - @rm -f testit$(EXEEXT) - $(LINK) $(testit_LDFLAGS) $(testit_OBJECTS) $(testit_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man3dir = $(mandir)/man3 -install-man3: $(man3_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man3dir) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \ - done -uninstall-man3: - @$(NORMAL_UNINSTALL) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \ - rm -f $(DESTDIR)$(man3dir)/$$inst; \ - done -includeHEADERS_INSTALL = $(INSTALL_HEADER) -install-includeHEADERS: $(include_HEADERS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(includedir) - @list='$(include_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ - $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ - done - -uninstall-includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ - rm -f $(DESTDIR)$(includedir)/$$f; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(man3dir) $(DESTDIR)$(includedir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstLTLIBRARIES clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-includeHEADERS install-man - -install-exec-am: install-libLTLIBRARIES - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man3 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES uninstall-man - -uninstall-man: uninstall-man3 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstLTLIBRARIES clean-noinstPROGRAMS distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-data-local \ - install-exec install-exec-am install-includeHEADERS \ - install-info install-info-am install-libLTLIBRARIES install-man \ - install-man3 install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool tags uninstall uninstall-am \ - uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES uninstall-man uninstall-man3 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -snprintf.c: - $(LN_S) $(srcdir)/../roken/snprintf.c . -strdup.c: - $(LN_S) $(srcdir)/../roken/strdup.c . -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/lib/editline/Makefile.am b/crypto/heimdal/lib/editline/Makefile.am deleted file mode 100644 index 5500d26..0000000 --- a/crypto/heimdal/lib/editline/Makefile.am +++ /dev/null @@ -1,53 +0,0 @@ -# $Id: Makefile.am,v 1.13 2002/08/13 13:48:15 joda Exp $ - -include $(top_srcdir)/Makefile.am.common - -if do_roken_rename -ES = snprintf.c strdup.c -endif - -INCLUDES += $(ROKEN_RENAME) - -man_MANS = editline.3 - -lib_LTLIBRARIES = libeditline.la -if el_compat -noinst_LTLIBRARIES = libel_compat.la -else -noinst_LTLIBRARIES = -endif - -noinst_PROGRAMS = testit - -CHECK_LOCAL = - -testit_LDADD = \ - libeditline.la \ - $(LIB_tgetent) \ - $(LIB_roken) - -include_HEADERS = editline.h - -libeditline_la_SOURCES = \ - complete.c \ - editline.c \ - sysunix.c \ - editline.h \ - roken_rename.h \ - unix.h \ - $(EXTRA_SOURCE) - -libeditline_la_LDFLAGS = -static - -EXTRA_SOURCE = $(ES) - -libel_compat_la_SOURCES = edit_compat.c - -libel_compat_la_LDFLAGS = -static - -EXTRA_DIST = $(man_MANS) - -snprintf.c: - $(LN_S) $(srcdir)/../roken/snprintf.c . -strdup.c: - $(LN_S) $(srcdir)/../roken/strdup.c . diff --git a/crypto/heimdal/lib/editline/Makefile.in b/crypto/heimdal/lib/editline/Makefile.in deleted file mode 100644 index 84b2d18..0000000 --- a/crypto/heimdal/lib/editline/Makefile.in +++ /dev/null @@ -1,730 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.13 2002/08/13 13:48:15 joda Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ -WFLAGS = @WFLAGS@ -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(ROKEN_RENAME) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -@do_roken_rename_TRUE@ES = snprintf.c strdup.c - -man_MANS = editline.3 - -lib_LTLIBRARIES = libeditline.la -@el_compat_TRUE@noinst_LTLIBRARIES = libel_compat.la -@el_compat_FALSE@noinst_LTLIBRARIES = - -noinst_PROGRAMS = testit - -CHECK_LOCAL = - -testit_LDADD = \ - libeditline.la \ - $(LIB_tgetent) \ - $(LIB_roken) - - -include_HEADERS = editline.h - -libeditline_la_SOURCES = \ - complete.c \ - editline.c \ - sysunix.c \ - editline.h \ - roken_rename.h \ - unix.h \ - $(EXTRA_SOURCE) - - -libeditline_la_LDFLAGS = -static - -EXTRA_SOURCE = $(ES) - -libel_compat_la_SOURCES = edit_compat.c - -libel_compat_la_LDFLAGS = -static - -EXTRA_DIST = $(man_MANS) -subdir = lib/editline -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) - -libeditline_la_LIBADD = -@do_roken_rename_TRUE@am__objects_1 = snprintf.lo strdup.lo -am__objects_2 = $(am__objects_1) -am_libeditline_la_OBJECTS = complete.lo editline.lo sysunix.lo \ - $(am__objects_2) -libeditline_la_OBJECTS = $(am_libeditline_la_OBJECTS) -libel_compat_la_LIBADD = -am_libel_compat_la_OBJECTS = edit_compat.lo -libel_compat_la_OBJECTS = $(am_libel_compat_la_OBJECTS) -noinst_PROGRAMS = testit$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -testit_SOURCES = testit.c -testit_OBJECTS = testit.$(OBJEXT) -testit_DEPENDENCIES = libeditline.la -testit_LDFLAGS = - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = $(libeditline_la_SOURCES) $(libel_compat_la_SOURCES) \ - testit.c -MANS = $(man_MANS) -HEADERS = $(include_HEADERS) - -DIST_COMMON = README $(include_HEADERS) ChangeLog Makefile.am \ - Makefile.in -SOURCES = $(libeditline_la_SOURCES) $(libel_compat_la_SOURCES) testit.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign lib/editline/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libLTLIBRARIES_INSTALL = $(INSTALL) -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libdir) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ - else :; fi; \ - done - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libeditline.la: $(libeditline_la_OBJECTS) $(libeditline_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libeditline_la_LDFLAGS) $(libeditline_la_OBJECTS) $(libeditline_la_LIBADD) $(LIBS) -libel_compat.la: $(libel_compat_la_OBJECTS) $(libel_compat_la_DEPENDENCIES) - $(LINK) $(libel_compat_la_LDFLAGS) $(libel_compat_la_OBJECTS) $(libel_compat_la_LIBADD) $(LIBS) - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -testit$(EXEEXT): $(testit_OBJECTS) $(testit_DEPENDENCIES) - @rm -f testit$(EXEEXT) - $(LINK) $(testit_LDFLAGS) $(testit_OBJECTS) $(testit_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -man3dir = $(mandir)/man3 -install-man3: $(man3_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(man3dir) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \ - done -uninstall-man3: - @$(NORMAL_UNINSTALL) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \ - rm -f $(DESTDIR)$(man3dir)/$$inst; \ - done -includeHEADERS_INSTALL = $(INSTALL_HEADER) -install-includeHEADERS: $(include_HEADERS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(includedir) - @list='$(include_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ - $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ - done - -uninstall-includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ - rm -f $(DESTDIR)$(includedir)/$$f; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(man3dir) $(DESTDIR)$(includedir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstLTLIBRARIES clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-includeHEADERS install-man - -install-exec-am: install-libLTLIBRARIES - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: install-man3 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES uninstall-man - -uninstall-man: uninstall-man3 - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstLTLIBRARIES clean-noinstPROGRAMS distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am info info-am install \ - install-am install-data install-data-am install-data-local \ - install-exec install-exec-am install-includeHEADERS \ - install-info install-info-am install-libLTLIBRARIES install-man \ - install-man3 install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool tags uninstall uninstall-am \ - uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES uninstall-man uninstall-man3 - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -snprintf.c: - $(LN_S) $(srcdir)/../roken/snprintf.c . -strdup.c: - $(LN_S) $(srcdir)/../roken/strdup.c . -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/lib/editline/README b/crypto/heimdal/lib/editline/README deleted file mode 100644 index 829db99..0000000 --- a/crypto/heimdal/lib/editline/README +++ /dev/null @@ -1,45 +0,0 @@ -$Revision: 1.1 $ - -This is a line-editing library. It can be linked into almost any -program to provide command-line editing and recall. - -It is call-compatible with the FSF readline library, but it is a -fraction of the size (and offers fewer features). It does not use -standard I/O. It is distributed under a "C News-like" copyright. - -Configuration is done in the Makefile. Type "make testit" to get -a small slow shell for testing. - -An earlier version was distributed with Byron's rc. Principal -changes over that version include: - Faster. - Is eight-bit clean (thanks to brendan@cs.widener.edu) - Written in K&R C, but ANSI compliant (gcc all warnings) - Propagates EOF properly; rc trip test now passes - Doesn't need or use or provide memmove. - More robust - Calling sequence changed to be compatible with readline. - Test program, new manpage, better configuration - More system-independant; includes Unix and OS-9 support. - -Enjoy, - Rich $alz - - - Copyright 1992 Simmule Turner and Rich Salz. All rights reserved. - - This software is not subject to any license of the American Telephone - and Telegraph Company or of the Regents of the University of California. - - Permission is granted to anyone to use this software for any purpose on - any computer system, and to alter it and redistribute it freely, subject - to the following restrictions: - 1. The authors are not responsible for the consequences of use of this - software, no matter how awful, even if they arise from flaws in it. - 2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. Since few users ever read sources, - credits must appear in the documentation. - 3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. Since few users - ever read sources, credits must appear in the documentation. - 4. This notice may not be removed or altered. diff --git a/crypto/heimdal/lib/editline/complete.c b/crypto/heimdal/lib/editline/complete.c deleted file mode 100644 index d2a311d..0000000 --- a/crypto/heimdal/lib/editline/complete.c +++ /dev/null @@ -1,243 +0,0 @@ -/* Copyright 1992 Simmule Turner and Rich Salz. All rights reserved. - * - * This software is not subject to any license of the American Telephone - * and Telegraph Company or of the Regents of the University of California. - * - * Permission is granted to anyone to use this software for any purpose on - * any computer system, and to alter it and redistribute it freely, subject - * to the following restrictions: - * 1. The authors are not responsible for the consequences of use of this - * software, no matter how awful, even if they arise from flaws in it. - * 2. The origin of this software must not be misrepresented, either by - * explicit claim or by omission. Since few users ever read sources, - * credits must appear in the documentation. - * 3. Altered versions must be plainly marked as such, and must not be - * misrepresented as being the original software. Since few users - * ever read sources, credits must appear in the documentation. - * 4. This notice may not be removed or altered. - */ - -/* -** History and file completion functions for editline library. -*/ -#include -#include "editline.h" - -RCSID("$Id: complete.c,v 1.5 1999/04/10 21:01:16 joda Exp $"); - -/* -** strcmp-like sorting predicate for qsort. -*/ -static int -compare(const void *p1, const void *p2) -{ - const char **v1; - const char **v2; - - v1 = (const char **)p1; - v2 = (const char **)p2; - return strcmp(*v1, *v2); -} - -/* -** Fill in *avp with an array of names that match file, up to its length. -** Ignore . and .. . -*/ -static int -FindMatches(char *dir, char *file, char ***avp) -{ - char **av; - char **new; - char *p; - DIR *dp; - DIRENTRY *ep; - size_t ac; - size_t len; - - if ((dp = opendir(dir)) == NULL) - return 0; - - av = NULL; - ac = 0; - len = strlen(file); - while ((ep = readdir(dp)) != NULL) { - p = ep->d_name; - if (p[0] == '.' && (p[1] == '\0' || (p[1] == '.' && p[2] == '\0'))) - continue; - if (len && strncmp(p, file, len) != 0) - continue; - - if ((ac % MEM_INC) == 0) { - if ((new = malloc(sizeof(char*) * (ac + MEM_INC))) == NULL) - break; - if (ac) { - memcpy(new, av, ac * sizeof (char **)); - free(av); - } - *avp = av = new; - } - - if ((av[ac] = strdup(p)) == NULL) { - if (ac == 0) - free(av); - break; - } - ac++; - } - - /* Clean up and return. */ - (void)closedir(dp); - if (ac) - qsort(av, ac, sizeof (char **), compare); - return ac; -} - -/* -** Split a pathname into allocated directory and trailing filename parts. -*/ -static int SplitPath(char *path, char **dirpart, char **filepart) -{ - static char DOT[] = "."; - char *dpart; - char *fpart; - - if ((fpart = strrchr(path, '/')) == NULL) { - if ((dpart = strdup(DOT)) == NULL) - return -1; - if ((fpart = strdup(path)) == NULL) { - free(dpart); - return -1; - } - } - else { - if ((dpart = strdup(path)) == NULL) - return -1; - dpart[fpart - path] = '\0'; - if ((fpart = strdup(++fpart)) == NULL) { - free(dpart); - return -1; - } - } - *dirpart = dpart; - *filepart = fpart; - return 0; -} - -/* -** Attempt to complete the pathname, returning an allocated copy. -** Fill in *unique if we completed it, or set it to 0 if ambiguous. -*/ - -static char * -rl_complete_filename(char *pathname, int *unique) -{ - char **av; - char *new; - char *p; - size_t ac; - size_t end; - size_t i; - size_t j; - size_t len; - char *s; - - ac = rl_list_possib(pathname, &av); - if(ac == 0) - return NULL; - - s = strrchr(pathname, '/'); - if(s == NULL) - len = strlen(pathname); - else - len = strlen(s + 1); - - p = NULL; - if (ac == 1) { - /* Exactly one match -- finish it off. */ - *unique = 1; - j = strlen(av[0]) - len + 2; - if ((p = malloc(j + 1)) != NULL) { - memcpy(p, av[0] + len, j); - asprintf(&new, "%s%s", pathname, p); - if(new != NULL) { - rl_add_slash(new, p); - free(new); - } - } - } - else { - *unique = 0; - if (len) { - /* Find largest matching substring. */ - for (i = len, end = strlen(av[0]); i < end; i++) - for (j = 1; j < ac; j++) - if (av[0][i] != av[j][i]) - goto breakout; - breakout: - if (i > len) { - j = i - len + 1; - if ((p = malloc(j)) != NULL) { - memcpy(p, av[0] + len, j); - p[j - 1] = '\0'; - } - } - } - } - - /* Clean up and return. */ - for (i = 0; i < ac; i++) - free(av[i]); - free(av); - return p; -} - -static rl_complete_func_t complete_func = rl_complete_filename; - -char * -rl_complete(char *pathname, int *unique) -{ - return (*complete_func)(pathname, unique); -} - -rl_complete_func_t -rl_set_complete_func(rl_complete_func_t func) -{ - rl_complete_func_t old = complete_func; - complete_func = func; - return old; -} - - -/* -** Return all possible completions. -*/ -static int -rl_list_possib_filename(char *pathname, char ***avp) -{ - char *dir; - char *file; - int ac; - - if (SplitPath(pathname, &dir, &file) < 0) - return 0; - ac = FindMatches(dir, file, avp); - free(dir); - free(file); - return ac; -} - -static rl_list_possib_func_t list_possib_func = rl_list_possib_filename; - -int -rl_list_possib(char *pathname, char ***avp) -{ - return (*list_possib_func)(pathname, avp); -} - -rl_list_possib_func_t -rl_set_list_possib_func(rl_list_possib_func_t func) -{ - rl_list_possib_func_t old = list_possib_func; - list_possib_func = func; - return old; -} diff --git a/crypto/heimdal/lib/editline/edit_compat.c b/crypto/heimdal/lib/editline/edit_compat.c deleted file mode 100644 index e0f4962..0000000 --- a/crypto/heimdal/lib/editline/edit_compat.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (c) 1995 - 2001 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -#include -#include -#include - -#include "edit_compat.h" - -RCSID("$Id: edit_compat.c,v 1.9 2001/08/29 00:24:33 assar Exp $"); - -void -rl_reset_terminal(char *p) -{ -} - -void -rl_initialize(void) -{ -} - -static const char *pr; -static const char* ret_prompt(EditLine *e) -{ - return pr; -} - -static History *h; - -#ifdef H_SETSIZE -#define EL_INIT_FOUR 1 -#else -#ifdef H_SETMAXSIZE -/* backwards compatibility */ -#define H_SETSIZE H_SETMAXSIZE -#endif -#endif - -char * -readline(const char* prompt) -{ - static EditLine *e; -#ifdef H_SETSIZE - HistEvent ev; -#endif - int count; - const char *str; - - if(e == NULL){ -#ifdef EL_INIT_FOUR - e = el_init("", stdin, stdout, stderr); -#else - e = el_init("", stdin, stdout); -#endif - el_set(e, EL_PROMPT, ret_prompt); - h = history_init(); -#ifdef H_SETSIZE - history(h, &ev, H_SETSIZE, 25); -#else - history(h, H_EVENT, 25); -#endif - el_set(e, EL_HIST, history, h); - el_set(e, EL_EDITOR, "emacs"); /* XXX? */ - } - pr = prompt ? prompt : ""; - str = el_gets(e, &count); - if (str && count > 0) { - char *ret = strdup (str); - - if (ret == NULL) - return NULL; - - if (ret[strlen(ret) - 1] == '\n') - ret[strlen(ret) - 1] = '\0'; - return ret; - } - return NULL; -} - -void -add_history(char *p) -{ -#ifdef H_SETSIZE - HistEvent ev; - history(h, &ev, H_ENTER, p); -#else - history(h, H_ENTER, p); -#endif -} diff --git a/crypto/heimdal/lib/editline/edit_compat.h b/crypto/heimdal/lib/editline/edit_compat.h deleted file mode 100644 index c0c40fe..0000000 --- a/crypto/heimdal/lib/editline/edit_compat.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (c) 2001 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: edit_compat.h,v 1.1 2001/08/29 00:24:33 assar Exp $ */ - -#ifndef _EDIT_COMPAT_H -#define _EDIT_COMPAT_H - -void rl_reset_terminal(char *p); -void rl_initialize(void); -char *readline(const char *prompt); -void add_history(char *p); - -#endif /* _EDIT_COMPAT_H */ diff --git a/crypto/heimdal/lib/editline/editline.3 b/crypto/heimdal/lib/editline/editline.3 deleted file mode 100644 index 6e30a09..0000000 --- a/crypto/heimdal/lib/editline/editline.3 +++ /dev/null @@ -1,175 +0,0 @@ -.\" $Revision: 1.2 $ -.TH EDITLINE 3 -.SH NAME -editline \- command-line editing library with history -.SH SYNOPSIS -.nf -.B "char *" -.B "readline(prompt)" -.B " char *prompt;" - -.B "void" -.B "add_history(line)" -.B " char *line;" -.fi -.SH DESCRIPTION -.I Editline -is a library that provides an line-editing interface with text recall. -It is intended to be compatible with the -.I readline -library provided by the Free Software Foundation, but much smaller. -The bulk of this manual page describes the user interface. -.PP -The -.I readline -routine returns a line of text with the trailing newline removed. -The data is returned in a buffer allocated with -.IR malloc (3), -so the space should be released with -.IR free (3) -when the calling program is done with it. -Before accepting input from the user, the specified -.I prompt -is displayed on the terminal. -.PP -The -.I add_history -routine makes a copy of the specified -.I line -and adds it to the internal history list. -.SS "User Interface" -A program that uses this library provides a simple emacs-like editing -interface to its users. -A line may be edited before it is sent to the calling program by typing either -control characters or escape sequences. -A control character, shown as a caret followed by a letter, is typed by -holding down the ``control'' key while the letter is typed. -For example, ``^A'' is a control-A. -An escape sequence is entered by typing the ``escape'' key followed by one or -more characters. -The escape key is abbreviated as ``ESC.'' -Note that unlike control keys, case matters in escape sequences; ``ESC\ F'' -is not the same as ``ESC\ f''. -.PP -An editing command may be typed anywhere on the line, not just at the -beginning. -In addition, a return may also be typed anywhere on the line, not just at -the end. -.PP -Most editing commands may be given a repeat count, -.IR n , -where -.I n -is a number. -To enter a repeat count, type the escape key, the number, and then -the command to execute. -For example, ``ESC\ 4\ ^f'' moves forward four characters. -If a command may be given a repeat count then the text ``[n]'' is given at the -end of its description. -.PP -The following control characters are accepted: -.RS -.nf -.ta \w'ESC DEL 'u -^A Move to the beginning of the line -^B Move left (backwards) [n] -^D Delete character [n] -^E Move to end of line -^F Move right (forwards) [n] -^G Ring the bell -^H Delete character before cursor (backspace key) [n] -^I Complete filename (tab key); see below -^J Done with line (return key) -^K Kill to end of line (or column [n]) -^L Redisplay line -^M Done with line (alternate return key) -^N Get next line from history [n] -^P Get previous line from history [n] -^R Search backward (forward if [n]) through history for text; -\& must start line if text begins with an uparrow -^T Transpose characters -^V Insert next character, even if it is an edit command -^W Wipe to the mark -^X^X Exchange current location and mark -^Y Yank back last killed text -^[ Start an escape sequence (escape key) -^]c Move forward to next character ``c'' -^? Delete character before cursor (delete key) [n] -.fi -.RE -.PP -The following escape sequences are provided. -.RS -.nf -.ta \w'ESC DEL 'u -ESC\ ^H Delete previous word (backspace key) [n] -ESC\ DEL Delete previous word (delete key) [n] -ESC\ SP Set the mark (space key); see ^X^X and ^Y above -ESC\ \. Get the last (or [n]'th) word from previous line -ESC\ ? Show possible completions; see below -ESC\ < Move to start of history -ESC\ > Move to end of history -ESC\ b Move backward a word [n] -ESC\ d Delete word under cursor [n] -ESC\ f Move forward a word [n] -ESC\ l Make word lowercase [n] -ESC\ u Make word uppercase [n] -ESC\ y Yank back last killed text -ESC\ v Show library version -ESC\ w Make area up to mark yankable -ESC\ nn Set repeat count to the number nn -ESC\ C Read from environment variable ``_C_'', where C is -\& an uppercase letter -.fi -.RE -.PP -The -.I editline -library has a small macro facility. -If you type the escape key followed by an uppercase letter, -.IR C , -then the contents of the environment variable -.I _C_ -are read in as if you had typed them at the keyboard. -For example, if the variable -.I _L_ -contains the following: -.RS -^A^Kecho '^V^[[H^V^[[2J'^M -.RE -Then typing ``ESC L'' will move to the beginning of the line, kill the -entire line, enter the echo command needed to clear the terminal (if your -terminal is like a VT-100), and send the line back to the shell. -.PP -The -.I editline -library also does filename completion. -Suppose the root directory has the following files in it: -.RS -.nf -.ta \w'core 'u -bin vmunix -core vmunix.old -.fi -.RE -If you type ``rm\ /v'' and then the tab key. -.I Editline -will then finish off as much of the name as possible by adding ``munix''. -Because the name is not unique, it will then beep. -If you type the escape key and a question mark, it will display the -two choices. -If you then type a period and a tab, the library will finish off the filename -for you: -.RS -.nf -.RI "rm /v[TAB]" munix .TAB old -.fi -.RE -The tab key is shown by ``[TAB]'' and the automatically-entered text -is shown in italics. -.SH "BUGS AND LIMITATIONS" -Cannot handle lines more than 80 columns. -.SH AUTHORS -Simmule R. Turner -and Rich $alz . -Original manual page by DaviD W. Sanderson . diff --git a/crypto/heimdal/lib/editline/editline.c b/crypto/heimdal/lib/editline/editline.c deleted file mode 100644 index 24fa846..0000000 --- a/crypto/heimdal/lib/editline/editline.c +++ /dev/null @@ -1,1376 +0,0 @@ -/* Copyright 1992 Simmule Turner and Rich Salz. All rights reserved. - * - * This software is not subject to any license of the American Telephone - * and Telegraph Company or of the Regents of the University of California. - * - * Permission is granted to anyone to use this software for any purpose on - * any computer system, and to alter it and redistribute it freely, subject - * to the following restrictions: - * 1. The authors are not responsible for the consequences of use of this - * software, no matter how awful, even if they arise from flaws in it. - * 2. The origin of this software must not be misrepresented, either by - * explicit claim or by omission. Since few users ever read sources, - * credits must appear in the documentation. - * 3. Altered versions must be plainly marked as such, and must not be - * misrepresented as being the original software. Since few users - * ever read sources, credits must appear in the documentation. - * 4. This notice may not be removed or altered. - */ - -/* -** Main editing routines for editline library. -*/ -#include -#include "editline.h" -#include -#include - -RCSID("$Id: editline.c,v 1.10 2001/09/13 01:19:54 assar Exp $"); - -/* -** Manifest constants. -*/ -#define SCREEN_WIDTH 80 -#define SCREEN_ROWS 24 -#define NO_ARG (-1) -#define DEL 127 -#define CTL(x) ((x) & 0x1F) -#define ISCTL(x) ((x) && (x) < ' ') -#define UNCTL(x) ((x) + 64) -#define META(x) ((x) | 0x80) -#define ISMETA(x) ((x) & 0x80) -#define UNMETA(x) ((x) & 0x7F) -#if !defined(HIST_SIZE) -#define HIST_SIZE 20 -#endif /* !defined(HIST_SIZE) */ - -/* -** Command status codes. -*/ -typedef enum _el_STATUS { - CSdone, CSeof, CSmove, CSdispatch, CSstay -} el_STATUS; - -/* -** The type of case-changing to perform. -*/ -typedef enum _CASE { - TOupper, TOlower -} CASE; - -/* -** Key to command mapping. -*/ -typedef struct _KEYMAP { - unsigned char Key; - el_STATUS (*Function)(); -} KEYMAP; - -/* -** Command history structure. -*/ -typedef struct _HISTORY { - int Size; - int Pos; - unsigned char *Lines[HIST_SIZE]; -} HISTORY; - -/* -** Globals. -*/ -int rl_eof; -int rl_erase; -int rl_intr; -int rl_kill; - -static unsigned char NIL[] = ""; -static const unsigned char *Input = NIL; -static unsigned char *Line; -static const char *Prompt; -static unsigned char *Yanked; -static char *Screen; -static char NEWLINE[]= CRLF; -static HISTORY H; -int rl_quit; -static int Repeat; -static int End; -static int Mark; -static int OldPoint; -static int Point; -static int PushBack; -static int Pushed; -static KEYMAP Map[33]; -static KEYMAP MetaMap[16]; -static size_t Length; -static size_t ScreenCount; -static size_t ScreenSize; -static char *backspace; -static int TTYwidth; -static int TTYrows; - -/* Display print 8-bit chars as `M-x' or as the actual 8-bit char? */ -int rl_meta_chars = 1; - -/* -** Declarations. -*/ -static unsigned char *editinput(void); -char *tgetstr(const char*, char**); -int tgetent(char*, const char*); -int tgetnum(const char*); - -/* -** TTY input/output functions. -*/ - -static void -TTYflush() -{ - if (ScreenCount) { - write(1, Screen, ScreenCount); - ScreenCount = 0; - } -} - -static void -TTYput(unsigned char c) -{ - Screen[ScreenCount] = c; - if (++ScreenCount >= ScreenSize - 1) { - ScreenSize += SCREEN_INC; - Screen = realloc(Screen, ScreenSize); - } -} - -static void -TTYputs(const char *p) -{ - while (*p) - TTYput(*p++); -} - -static void -TTYshow(unsigned char c) -{ - if (c == DEL) { - TTYput('^'); - TTYput('?'); - } - else if (ISCTL(c)) { - TTYput('^'); - TTYput(UNCTL(c)); - } - else if (rl_meta_chars && ISMETA(c)) { - TTYput('M'); - TTYput('-'); - TTYput(UNMETA(c)); - } - else - TTYput(c); -} - -static void -TTYstring(unsigned char *p) -{ - while (*p) - TTYshow(*p++); -} - -static int -TTYget() -{ - char c; - int e; - - TTYflush(); - if (Pushed) { - Pushed = 0; - return PushBack; - } - if (*Input) - return *Input++; - do { - e = read(0, &c, 1); - } while(e < 0 && errno == EINTR); - if(e == 1) - return c; - return EOF; -} - -static void -TTYback(void) -{ - if (backspace) - TTYputs(backspace); - else - TTYput('\b'); -} - -static void -TTYbackn(int n) -{ - while (--n >= 0) - TTYback(); -} - -static void -TTYinfo() -{ - static int init; - char *term; - char buff[2048]; - char *bp; - char *tmp; -#if defined(TIOCGWINSZ) - struct winsize W; -#endif /* defined(TIOCGWINSZ) */ - - if (init) { -#if defined(TIOCGWINSZ) - /* Perhaps we got resized. */ - if (ioctl(0, TIOCGWINSZ, &W) >= 0 - && W.ws_col > 0 && W.ws_row > 0) { - TTYwidth = (int)W.ws_col; - TTYrows = (int)W.ws_row; - } -#endif /* defined(TIOCGWINSZ) */ - return; - } - init++; - - TTYwidth = TTYrows = 0; - bp = &buff[0]; - if ((term = getenv("TERM")) == NULL) - term = "dumb"; - if (tgetent(buff, term) < 0) { - TTYwidth = SCREEN_WIDTH; - TTYrows = SCREEN_ROWS; - return; - } - tmp = tgetstr("le", &bp); - if (tmp != NULL) - backspace = strdup(tmp); - else - backspace = "\b"; - TTYwidth = tgetnum("co"); - TTYrows = tgetnum("li"); - -#if defined(TIOCGWINSZ) - if (ioctl(0, TIOCGWINSZ, &W) >= 0) { - TTYwidth = (int)W.ws_col; - TTYrows = (int)W.ws_row; - } -#endif /* defined(TIOCGWINSZ) */ - - if (TTYwidth <= 0 || TTYrows <= 0) { - TTYwidth = SCREEN_WIDTH; - TTYrows = SCREEN_ROWS; - } -} - - -/* -** Print an array of words in columns. -*/ -static void -columns(int ac, unsigned char **av) -{ - unsigned char *p; - int i; - int j; - int k; - int len; - int skip; - int longest; - int cols; - - /* Find longest name, determine column count from that. */ - for (longest = 0, i = 0; i < ac; i++) - if ((j = strlen((char *)av[i])) > longest) - longest = j; - cols = TTYwidth / (longest + 3); - - TTYputs(NEWLINE); - for (skip = ac / cols + 1, i = 0; i < skip; i++) { - for (j = i; j < ac; j += skip) { - for (p = av[j], len = strlen((char *)p), k = len; --k >= 0; p++) - TTYput(*p); - if (j + skip < ac) - while (++len < longest + 3) - TTYput(' '); - } - TTYputs(NEWLINE); - } -} - -static void -reposition() -{ - int i; - unsigned char *p; - - TTYput('\r'); - TTYputs(Prompt); - for (i = Point, p = Line; --i >= 0; p++) - TTYshow(*p); -} - -static void -left(el_STATUS Change) -{ - TTYback(); - if (Point) { - if (ISCTL(Line[Point - 1])) - TTYback(); - else if (rl_meta_chars && ISMETA(Line[Point - 1])) { - TTYback(); - TTYback(); - } - } - if (Change == CSmove) - Point--; -} - -static void -right(el_STATUS Change) -{ - TTYshow(Line[Point]); - if (Change == CSmove) - Point++; -} - -static el_STATUS -ring_bell() -{ - TTYput('\07'); - TTYflush(); - return CSstay; -} - -static el_STATUS -do_macro(unsigned char c) -{ - unsigned char name[4]; - - name[0] = '_'; - name[1] = c; - name[2] = '_'; - name[3] = '\0'; - - if ((Input = (unsigned char *)getenv((char *)name)) == NULL) { - Input = NIL; - return ring_bell(); - } - return CSstay; -} - -static el_STATUS -do_forward(el_STATUS move) -{ - int i; - unsigned char *p; - - i = 0; - do { - p = &Line[Point]; - for ( ; Point < End && (*p == ' ' || !isalnum(*p)); Point++, p++) - if (move == CSmove) - right(CSstay); - - for (; Point < End && isalnum(*p); Point++, p++) - if (move == CSmove) - right(CSstay); - - if (Point == End) - break; - } while (++i < Repeat); - - return CSstay; -} - -static el_STATUS -do_case(CASE type) -{ - int i; - int end; - int count; - unsigned char *p; - - do_forward(CSstay); - if (OldPoint != Point) { - if ((count = Point - OldPoint) < 0) - count = -count; - Point = OldPoint; - if ((end = Point + count) > End) - end = End; - for (i = Point, p = &Line[i]; i < end; i++, p++) { - if (type == TOupper) { - if (islower(*p)) - *p = toupper(*p); - } - else if (isupper(*p)) - *p = tolower(*p); - right(CSmove); - } - } - return CSstay; -} - -static el_STATUS -case_down_word() -{ - return do_case(TOlower); -} - -static el_STATUS -case_up_word() -{ - return do_case(TOupper); -} - -static void -ceol() -{ - int extras; - int i; - unsigned char *p; - - for (extras = 0, i = Point, p = &Line[i]; i <= End; i++, p++) { - TTYput(' '); - if (ISCTL(*p)) { - TTYput(' '); - extras++; - } - else if (rl_meta_chars && ISMETA(*p)) { - TTYput(' '); - TTYput(' '); - extras += 2; - } - } - - for (i += extras; i > Point; i--) - TTYback(); -} - -static void -clear_line() -{ - Point = -strlen(Prompt); - TTYput('\r'); - ceol(); - Point = 0; - End = 0; - Line[0] = '\0'; -} - -static el_STATUS -insert_string(unsigned char *p) -{ - size_t len; - int i; - unsigned char *new; - unsigned char *q; - - len = strlen((char *)p); - if (End + len >= Length) { - if ((new = malloc(sizeof(unsigned char) * (Length + len + MEM_INC))) == NULL) - return CSstay; - if (Length) { - memcpy(new, Line, Length); - free(Line); - } - Line = new; - Length += len + MEM_INC; - } - - for (q = &Line[Point], i = End - Point; --i >= 0; ) - q[len + i] = q[i]; - memcpy(&Line[Point], p, len); - End += len; - Line[End] = '\0'; - TTYstring(&Line[Point]); - Point += len; - - return Point == End ? CSstay : CSmove; -} - - -static unsigned char * -next_hist() -{ - return H.Pos >= H.Size - 1 ? NULL : H.Lines[++H.Pos]; -} - -static unsigned char * -prev_hist() -{ - return H.Pos == 0 ? NULL : H.Lines[--H.Pos]; -} - -static el_STATUS -do_insert_hist(unsigned char *p) -{ - if (p == NULL) - return ring_bell(); - Point = 0; - reposition(); - ceol(); - End = 0; - return insert_string(p); -} - -static el_STATUS -do_hist(unsigned char *(*move)()) -{ - unsigned char *p; - int i; - - i = 0; - do { - if ((p = (*move)()) == NULL) - return ring_bell(); - } while (++i < Repeat); - return do_insert_hist(p); -} - -static el_STATUS -h_next() -{ - return do_hist(next_hist); -} - -static el_STATUS -h_prev() -{ - return do_hist(prev_hist); -} - -static el_STATUS -h_first() -{ - return do_insert_hist(H.Lines[H.Pos = 0]); -} - -static el_STATUS -h_last() -{ - return do_insert_hist(H.Lines[H.Pos = H.Size - 1]); -} - -/* -** Return zero if pat appears as a substring in text. -*/ -static int -substrcmp(char *text, char *pat, int len) -{ - unsigned char c; - - if ((c = *pat) == '\0') - return *text == '\0'; - for ( ; *text; text++) - if (*text == c && strncmp(text, pat, len) == 0) - return 0; - return 1; -} - -static unsigned char * -search_hist(unsigned char *search, unsigned char *(*move)()) -{ - static unsigned char *old_search; - int len; - int pos; - int (*match)(); - char *pat; - - /* Save or get remembered search pattern. */ - if (search && *search) { - if (old_search) - free(old_search); - old_search = (unsigned char *)strdup((char *)search); - } - else { - if (old_search == NULL || *old_search == '\0') - return NULL; - search = old_search; - } - - /* Set up pattern-finder. */ - if (*search == '^') { - match = strncmp; - pat = (char *)(search + 1); - } - else { - match = substrcmp; - pat = (char *)search; - } - len = strlen(pat); - - for (pos = H.Pos; (*move)() != NULL; ) - if ((*match)((char *)H.Lines[H.Pos], pat, len) == 0) - return H.Lines[H.Pos]; - H.Pos = pos; - return NULL; -} - -static el_STATUS -h_search() -{ - static int Searching; - const char *old_prompt; - unsigned char *(*move)(); - unsigned char *p; - - if (Searching) - return ring_bell(); - Searching = 1; - - clear_line(); - old_prompt = Prompt; - Prompt = "Search: "; - TTYputs(Prompt); - move = Repeat == NO_ARG ? prev_hist : next_hist; - p = search_hist(editinput(), move); - clear_line(); - Prompt = old_prompt; - TTYputs(Prompt); - - Searching = 0; - return do_insert_hist(p); -} - -static el_STATUS -fd_char() -{ - int i; - - i = 0; - do { - if (Point >= End) - break; - right(CSmove); - } while (++i < Repeat); - return CSstay; -} - -static void -save_yank(int begin, int i) -{ - if (Yanked) { - free(Yanked); - Yanked = NULL; - } - - if (i < 1) - return; - - if ((Yanked = malloc(sizeof(unsigned char) * (i + 1))) != NULL) { - memcpy(Yanked, &Line[begin], i); - Yanked[i+1] = '\0'; - } -} - -static el_STATUS -delete_string(int count) -{ - int i; - unsigned char *p; - - if (count <= 0 || End == Point) - return ring_bell(); - - if (count == 1 && Point == End - 1) { - /* Optimize common case of delete at end of line. */ - End--; - p = &Line[Point]; - i = 1; - TTYput(' '); - if (ISCTL(*p)) { - i = 2; - TTYput(' '); - } - else if (rl_meta_chars && ISMETA(*p)) { - i = 3; - TTYput(' '); - TTYput(' '); - } - TTYbackn(i); - *p = '\0'; - return CSmove; - } - if (Point + count > End && (count = End - Point) <= 0) - return CSstay; - - if (count > 1) - save_yank(Point, count); - - for (p = &Line[Point], i = End - (Point + count) + 1; --i >= 0; p++) - p[0] = p[count]; - ceol(); - End -= count; - TTYstring(&Line[Point]); - return CSmove; -} - -static el_STATUS -bk_char() -{ - int i; - - i = 0; - do { - if (Point == 0) - break; - left(CSmove); - } while (++i < Repeat); - - return CSstay; -} - -static el_STATUS -bk_del_char() -{ - int i; - - i = 0; - do { - if (Point == 0) - break; - left(CSmove); - } while (++i < Repeat); - - return delete_string(i); -} - -static el_STATUS -redisplay() -{ - TTYputs(NEWLINE); - TTYputs(Prompt); - TTYstring(Line); - return CSmove; -} - -static el_STATUS -kill_line() -{ - int i; - - if (Repeat != NO_ARG) { - if (Repeat < Point) { - i = Point; - Point = Repeat; - reposition(); - delete_string(i - Point); - } - else if (Repeat > Point) { - right(CSmove); - delete_string(Repeat - Point - 1); - } - return CSmove; - } - - save_yank(Point, End - Point); - Line[Point] = '\0'; - ceol(); - End = Point; - return CSstay; -} - -static el_STATUS -insert_char(int c) -{ - el_STATUS s; - unsigned char buff[2]; - unsigned char *p; - unsigned char *q; - int i; - - if (Repeat == NO_ARG || Repeat < 2) { - buff[0] = c; - buff[1] = '\0'; - return insert_string(buff); - } - - if ((p = malloc(Repeat + 1)) == NULL) - return CSstay; - for (i = Repeat, q = p; --i >= 0; ) - *q++ = c; - *q = '\0'; - Repeat = 0; - s = insert_string(p); - free(p); - return s; -} - -static el_STATUS -meta() -{ - unsigned int c; - KEYMAP *kp; - - if ((c = TTYget()) == EOF) - return CSeof; - /* Also include VT-100 arrows. */ - if (c == '[' || c == 'O') - switch (c = TTYget()) { - default: return ring_bell(); - case EOF: return CSeof; - case 'A': return h_prev(); - case 'B': return h_next(); - case 'C': return fd_char(); - case 'D': return bk_char(); - } - - if (isdigit(c)) { - for (Repeat = c - '0'; (c = TTYget()) != EOF && isdigit(c); ) - Repeat = Repeat * 10 + c - '0'; - Pushed = 1; - PushBack = c; - return CSstay; - } - - if (isupper(c)) - return do_macro(c); - for (OldPoint = Point, kp = MetaMap; kp->Function; kp++) - if (kp->Key == c) - return (*kp->Function)(); - - return ring_bell(); -} - -static el_STATUS -emacs(unsigned int c) -{ - el_STATUS s; - KEYMAP *kp; - - if (ISMETA(c)) { - Pushed = 1; - PushBack = UNMETA(c); - return meta(); - } - for (kp = Map; kp->Function; kp++) - if (kp->Key == c) - break; - s = kp->Function ? (*kp->Function)() : insert_char((int)c); - if (!Pushed) - /* No pushback means no repeat count; hacky, but true. */ - Repeat = NO_ARG; - return s; -} - -static el_STATUS -TTYspecial(unsigned int c) -{ - if (ISMETA(c)) - return CSdispatch; - - if (c == rl_erase || c == DEL) - return bk_del_char(); - if (c == rl_kill) { - if (Point != 0) { - Point = 0; - reposition(); - } - Repeat = NO_ARG; - return kill_line(); - } - if (c == rl_intr || c == rl_quit) { - Point = End = 0; - Line[0] = '\0'; - return redisplay(); - } - if (c == rl_eof && Point == 0 && End == 0) - return CSeof; - - return CSdispatch; -} - -static unsigned char * -editinput() -{ - unsigned int c; - - Repeat = NO_ARG; - OldPoint = Point = Mark = End = 0; - Line[0] = '\0'; - - while ((c = TTYget()) != EOF) - switch (TTYspecial(c)) { - case CSdone: - return Line; - case CSeof: - return NULL; - case CSmove: - reposition(); - break; - case CSdispatch: - switch (emacs(c)) { - case CSdone: - return Line; - case CSeof: - return NULL; - case CSmove: - reposition(); - break; - case CSdispatch: - case CSstay: - break; - } - break; - case CSstay: - break; - } - return NULL; -} - -static void -hist_add(unsigned char *p) -{ - int i; - - if ((p = (unsigned char *)strdup((char *)p)) == NULL) - return; - if (H.Size < HIST_SIZE) - H.Lines[H.Size++] = p; - else { - free(H.Lines[0]); - for (i = 0; i < HIST_SIZE - 1; i++) - H.Lines[i] = H.Lines[i + 1]; - H.Lines[i] = p; - } - H.Pos = H.Size - 1; -} - -/* -** For compatibility with FSF readline. -*/ -/* ARGSUSED0 */ -void -rl_reset_terminal(char *p) -{ -} - -void -rl_initialize(void) -{ -} - -char * -readline(const char* prompt) -{ - unsigned char *line; - - if (Line == NULL) { - Length = MEM_INC; - if ((Line = malloc(Length)) == NULL) - return NULL; - } - - TTYinfo(); - rl_ttyset(0); - hist_add(NIL); - ScreenSize = SCREEN_INC; - Screen = malloc(ScreenSize); - Prompt = prompt ? prompt : (char *)NIL; - TTYputs(Prompt); - if ((line = editinput()) != NULL) { - line = (unsigned char *)strdup((char *)line); - TTYputs(NEWLINE); - TTYflush(); - } - rl_ttyset(1); - free(Screen); - free(H.Lines[--H.Size]); - return (char *)line; -} - -void -add_history(char *p) -{ - if (p == NULL || *p == '\0') - return; - -#if defined(UNIQUE_HISTORY) - if (H.Pos && strcmp(p, H.Lines[H.Pos - 1]) == 0) - return; -#endif /* defined(UNIQUE_HISTORY) */ - hist_add((unsigned char *)p); -} - - -static el_STATUS -beg_line() -{ - if (Point) { - Point = 0; - return CSmove; - } - return CSstay; -} - -static el_STATUS -del_char() -{ - return delete_string(Repeat == NO_ARG ? 1 : Repeat); -} - -static el_STATUS -end_line() -{ - if (Point != End) { - Point = End; - return CSmove; - } - return CSstay; -} - -/* -** Move back to the beginning of the current word and return an -** allocated copy of it. -*/ -static unsigned char * -find_word() -{ - static char SEPS[] = "#;&|^$=`'{}()<>\n\t "; - unsigned char *p; - unsigned char *new; - size_t len; - - for (p = &Line[Point]; p > Line && strchr(SEPS, (char)p[-1]) == NULL; p--) - continue; - len = Point - (p - Line) + 1; - if ((new = malloc(len)) == NULL) - return NULL; - memcpy(new, p, len); - new[len - 1] = '\0'; - return new; -} - -static el_STATUS -c_complete() -{ - unsigned char *p; - unsigned char *word; - int unique; - el_STATUS s; - - word = find_word(); - p = (unsigned char *)rl_complete((char *)word, &unique); - if (word) - free(word); - if (p && *p) { - s = insert_string(p); - if (!unique) - ring_bell(); - free(p); - return s; - } - return ring_bell(); -} - -static el_STATUS -c_possible() -{ - unsigned char **av; - unsigned char *word; - int ac; - - word = find_word(); - ac = rl_list_possib((char *)word, (char ***)&av); - if (word) - free(word); - if (ac) { - columns(ac, av); - while (--ac >= 0) - free(av[ac]); - free(av); - return CSmove; - } - return ring_bell(); -} - -static el_STATUS -accept_line() -{ - Line[End] = '\0'; - return CSdone; -} - -static el_STATUS -transpose() -{ - unsigned char c; - - if (Point) { - if (Point == End) - left(CSmove); - c = Line[Point - 1]; - left(CSstay); - Line[Point - 1] = Line[Point]; - TTYshow(Line[Point - 1]); - Line[Point++] = c; - TTYshow(c); - } - return CSstay; -} - -static el_STATUS -quote() -{ - unsigned int c; - - return (c = TTYget()) == EOF ? CSeof : insert_char((int)c); -} - -static el_STATUS -wipe() -{ - int i; - - if (Mark > End) - return ring_bell(); - - if (Point > Mark) { - i = Point; - Point = Mark; - Mark = i; - reposition(); - } - - return delete_string(Mark - Point); -} - -static el_STATUS -mk_set() -{ - Mark = Point; - return CSstay; -} - -static el_STATUS -exchange() -{ - unsigned int c; - - if ((c = TTYget()) != CTL('X')) - return c == EOF ? CSeof : ring_bell(); - - if ((c = Mark) <= End) { - Mark = Point; - Point = c; - return CSmove; - } - return CSstay; -} - -static el_STATUS -yank() -{ - if (Yanked && *Yanked) - return insert_string(Yanked); - return CSstay; -} - -static el_STATUS -copy_region() -{ - if (Mark > End) - return ring_bell(); - - if (Point > Mark) - save_yank(Mark, Point - Mark); - else - save_yank(Point, Mark - Point); - - return CSstay; -} - -static el_STATUS -move_to_char() -{ - unsigned int c; - int i; - unsigned char *p; - - if ((c = TTYget()) == EOF) - return CSeof; - for (i = Point + 1, p = &Line[i]; i < End; i++, p++) - if (*p == c) { - Point = i; - return CSmove; - } - return CSstay; -} - -static el_STATUS -fd_word() -{ - return do_forward(CSmove); -} - -static el_STATUS -fd_kill_word() -{ - int i; - - do_forward(CSstay); - if (OldPoint != Point) { - i = Point - OldPoint; - Point = OldPoint; - return delete_string(i); - } - return CSstay; -} - -static el_STATUS -bk_word() -{ - int i; - unsigned char *p; - - i = 0; - do { - for (p = &Line[Point]; p > Line && !isalnum(p[-1]); p--) - left(CSmove); - - for (; p > Line && p[-1] != ' ' && isalnum(p[-1]); p--) - left(CSmove); - - if (Point == 0) - break; - } while (++i < Repeat); - - return CSstay; -} - -static el_STATUS -bk_kill_word() -{ - bk_word(); - if (OldPoint != Point) - return delete_string(OldPoint - Point); - return CSstay; -} - -static int -argify(unsigned char *line, unsigned char ***avp) -{ - unsigned char *c; - unsigned char **p; - unsigned char **new; - int ac; - int i; - - i = MEM_INC; - if ((*avp = p = malloc(sizeof(unsigned char*) * i))== NULL) - return 0; - - for (c = line; isspace(*c); c++) - continue; - if (*c == '\n' || *c == '\0') - return 0; - - for (ac = 0, p[ac++] = c; *c && *c != '\n'; ) { - if (isspace(*c)) { - *c++ = '\0'; - if (*c && *c != '\n') { - if (ac + 1 == i) { - new = malloc(sizeof(unsigned char*) * (i + MEM_INC)); - if (new == NULL) { - p[ac] = NULL; - return ac; - } - memcpy(new, p, i * sizeof (char **)); - i += MEM_INC; - free(p); - *avp = p = new; - } - p[ac++] = c; - } - } - else - c++; - } - *c = '\0'; - p[ac] = NULL; - return ac; -} - -static el_STATUS -last_argument() -{ - unsigned char **av; - unsigned char *p; - el_STATUS s; - int ac; - - if (H.Size == 1 || (p = H.Lines[H.Size - 2]) == NULL) - return ring_bell(); - - if ((p = (unsigned char *)strdup((char *)p)) == NULL) - return CSstay; - ac = argify(p, &av); - - if (Repeat != NO_ARG) - s = Repeat < ac ? insert_string(av[Repeat]) : ring_bell(); - else - s = ac ? insert_string(av[ac - 1]) : CSstay; - - if (ac) - free(av); - free(p); - return s; -} - -static KEYMAP Map[33] = { - { CTL('@'), ring_bell }, - { CTL('A'), beg_line }, - { CTL('B'), bk_char }, - { CTL('D'), del_char }, - { CTL('E'), end_line }, - { CTL('F'), fd_char }, - { CTL('G'), ring_bell }, - { CTL('H'), bk_del_char }, - { CTL('I'), c_complete }, - { CTL('J'), accept_line }, - { CTL('K'), kill_line }, - { CTL('L'), redisplay }, - { CTL('M'), accept_line }, - { CTL('N'), h_next }, - { CTL('O'), ring_bell }, - { CTL('P'), h_prev }, - { CTL('Q'), ring_bell }, - { CTL('R'), h_search }, - { CTL('S'), ring_bell }, - { CTL('T'), transpose }, - { CTL('U'), ring_bell }, - { CTL('V'), quote }, - { CTL('W'), wipe }, - { CTL('X'), exchange }, - { CTL('Y'), yank }, - { CTL('Z'), ring_bell }, - { CTL('['), meta }, - { CTL(']'), move_to_char }, - { CTL('^'), ring_bell }, - { CTL('_'), ring_bell }, - { 0, NULL } -}; - -static KEYMAP MetaMap[16]= { - { CTL('H'), bk_kill_word }, - { DEL, bk_kill_word }, - { ' ', mk_set }, - { '.', last_argument }, - { '<', h_first }, - { '>', h_last }, - { '?', c_possible }, - { 'b', bk_word }, - { 'd', fd_kill_word }, - { 'f', fd_word }, - { 'l', case_down_word }, - { 'u', case_up_word }, - { 'y', yank }, - { 'w', copy_region }, - { 0, NULL } -}; diff --git a/crypto/heimdal/lib/editline/editline.cat3 b/crypto/heimdal/lib/editline/editline.cat3 deleted file mode 100644 index 93f02f7..0000000 --- a/crypto/heimdal/lib/editline/editline.cat3 +++ /dev/null @@ -1,141 +0,0 @@ -EDITLINE(3) EDITLINE(3) - - - -NNAAMMEE - editline - command-line editing library with history - -SSYYNNOOPPSSIISS - cchhaarr ** - rreeaaddlliinnee((pprroommpptt)) - cchhaarr **pprroommpptt;; - - vvooiidd - aadddd__hhiissttoorryy((lliinnee)) - cchhaarr **lliinnee;; - -DDEESSCCRRIIPPTTIIOONN - _E_d_i_t_l_i_n_e is a library that provides an line-editing inter- - face with text recall. It is intended to be compatible - with the _r_e_a_d_l_i_n_e library provided by the Free Software - Foundation, but much smaller. The bulk of this manual - page describes the user interface. - - The _r_e_a_d_l_i_n_e routine returns a line of text with the - trailing newline removed. The data is returned in a - buffer allocated with _m_a_l_l_o_c(3), so the space should be - released with _f_r_e_e(3) when the calling program is done - with it. Before accepting input from the user, the speci- - fied _p_r_o_m_p_t is displayed on the terminal. - - The _a_d_d___h_i_s_t_o_r_y routine makes a copy of the specified _l_i_n_e - and adds it to the internal history list. - - UUsseerr IInntteerrffaaccee - A program that uses this library provides a simple emacs- - like editing interface to its users. A line may be edited - before it is sent to the calling program by typing either - control characters or escape sequences. A control charac- - ter, shown as a caret followed by a letter, is typed by - holding down the ``control'' key while the letter is - typed. For example, ``^A'' is a control-A. An escape - sequence is entered by typing the ``escape'' key followed - by one or more characters. The escape key is abbreviated - as ``ESC.'' Note that unlike control keys, case matters - in escape sequences; ``ESC F'' is not the same as - ``ESC f''. - - An editing command may be typed anywhere on the line, not - just at the beginning. In addition, a return may also be - typed anywhere on the line, not just at the end. - - Most editing commands may be given a repeat count, _n, - where _n is a number. To enter a repeat count, type the - escape key, the number, and then the command to execute. - For example, ``ESC 4 ^f'' moves forward four characters. - If a command may be given a repeat count then the text - ``[n]'' is given at the end of its description. - - The following control characters are accepted: - ^A Move to the beginning of the line - ^B Move left (backwards) [n] - ^D Delete character [n] - ^E Move to end of line - ^F Move right (forwards) [n] - ^G Ring the bell - ^H Delete character before cursor (backspace key) [n] - ^I Complete filename (tab key); see below - ^J Done with line (return key) - ^K Kill to end of line (or column [n]) - ^L Redisplay line - ^M Done with line (alternate return key) - ^N Get next line from history [n] - ^P Get previous line from history [n] - ^R Search backward (forward if [n]) through history for text; - must start line if text begins with an uparrow - ^T Transpose characters - ^V Insert next character, even if it is an edit command - ^W Wipe to the mark - ^X^X Exchange current location and mark - ^Y Yank back last killed text - ^[ Start an escape sequence (escape key) - ^]c Move forward to next character ``c'' - ^? Delete character before cursor (delete key) [n] - - The following escape sequences are provided. - ESC ^H Delete previous word (backspace key) [n] - ESC DEL Delete previous word (delete key) [n] - ESC SP Set the mark (space key); see ^X^X and ^Y above - ESC . Get the last (or [n]'th) word from previous line - ESC ? Show possible completions; see below - ESC < Move to start of history - ESC > Move to end of history - ESC b Move backward a word [n] - ESC d Delete word under cursor [n] - ESC f Move forward a word [n] - ESC l Make word lowercase [n] - ESC u Make word uppercase [n] - ESC y Yank back last killed text - ESC v Show library version - ESC w Make area up to mark yankable - ESC nn Set repeat count to the number nn - ESC C Read from environment variable ``_C_'', where C is - an uppercase letter - - The _e_d_i_t_l_i_n_e library has a small macro facility. If you - type the escape key followed by an uppercase letter, _C, - then the contents of the environment variable ___C__ are read - in as if you had typed them at the keyboard. For example, - if the variable ___L__ contains the following: - ^A^Kecho '^V^[[H^V^[[2J'^M - Then typing ``ESC L'' will move to the beginning of the - line, kill the entire line, enter the echo command needed - to clear the terminal (if your terminal is like a VT-100), - and send the line back to the shell. - - The _e_d_i_t_l_i_n_e library also does filename completion. Sup- - pose the root directory has the following files in it: - bin vmunix - core vmunix.old - If you type ``rm /v'' and then the tab key. _E_d_i_t_l_i_n_e will - then finish off as much of the name as possible by adding - ``munix''. Because the name is not unique, it will then - beep. If you type the escape key and a question mark, it - will display the two choices. If you then type a period - and a tab, the library will finish off the filename for - you: - rm /v[TAB]_m_u_n_i_x.TAB_o_l_d - The tab key is shown by ``[TAB]'' and the automatically- - entered text is shown in italics. - -BBUUGGSS AANNDD LLIIMMIITTAATTIIOONNSS - Cannot handle lines more than 80 columns. - -AAUUTTHHOORRSS - Simmule R. Turner and - Rich $alz . Original manual page by DaviD - W. Sanderson . - - - - EDITLINE(3) diff --git a/crypto/heimdal/lib/editline/editline.h b/crypto/heimdal/lib/editline/editline.h deleted file mode 100644 index a948ddc..0000000 --- a/crypto/heimdal/lib/editline/editline.h +++ /dev/null @@ -1,64 +0,0 @@ -/* $Revision: 1.4 $ -** -** Internal header file for editline library. -*/ -#ifdef HAVE_CONFIG_H -#include -#endif - -#include -#include -#include - -#define CRLF "\r\n" - -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_SYS_STAT_H -#include -#endif - -#ifdef HAVE_DIRENT_H -#include -typedef struct dirent DIRENTRY; -#else -#include -typedef struct direct DIRENTRY; -#endif - -#include - -#if !defined(S_ISDIR) -#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) -#endif /* !defined(S_ISDIR) */ - -typedef unsigned char CHAR; - -#define MEM_INC 64 -#define SCREEN_INC 256 - -/* -** Variables and routines internal to this package. -*/ -extern int rl_eof; -extern int rl_erase; -extern int rl_intr; -extern int rl_kill; -extern int rl_quit; - -typedef char* (*rl_complete_func_t)(char*, int*); - -typedef int (*rl_list_possib_func_t)(char*, char***); - -void add_history (char*); -char* readline (const char* prompt); -void rl_add_slash (char*, char*); -char* rl_complete (char*, int*); -void rl_initialize (void); -int rl_list_possib (char*, char***); -void rl_reset_terminal (char*); -void rl_ttyset (int); -rl_complete_func_t rl_set_complete_func (rl_complete_func_t); -rl_list_possib_func_t rl_set_list_possib_func (rl_list_possib_func_t); - diff --git a/crypto/heimdal/lib/editline/roken_rename.h b/crypto/heimdal/lib/editline/roken_rename.h deleted file mode 100644 index 9ea278d..0000000 --- a/crypto/heimdal/lib/editline/roken_rename.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (c) 1998, 1999 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: roken_rename.h,v 1.4 1999/12/02 16:58:39 joda Exp $ */ - -#ifndef __roken_rename_h__ -#define __roken_rename_h__ - -#ifndef HAVE_STRDUP -#define strdup _editline_strdup -#endif -#ifndef HAVE_SNPRINTF -#define snprintf _editline_snprintf -#endif -#ifndef HAVE_VSNPRINTF -#define vsnprintf _editline_vsnprintf -#endif -#ifndef HAVE_ASPRINTF -#define asprintf _editline_asprintf -#endif -#ifndef HAVE_ASNPRINTF -#define asnprintf _editline_asnprintf -#endif -#ifndef HAVE_VASPRINTF -#define vasprintf _editline_vasprintf -#endif -#ifndef HAVE_VASNPRINTF -#define vasnprintf _editline_vasnprintf -#endif - -#endif /* __roken_rename_h__ */ diff --git a/crypto/heimdal/lib/editline/sysunix.c b/crypto/heimdal/lib/editline/sysunix.c deleted file mode 100644 index bcd6def..0000000 --- a/crypto/heimdal/lib/editline/sysunix.c +++ /dev/null @@ -1,92 +0,0 @@ -/* Copyright 1992 Simmule Turner and Rich Salz. All rights reserved. - * - * This software is not subject to any license of the American Telephone - * and Telegraph Company or of the Regents of the University of California. - * - * Permission is granted to anyone to use this software for any purpose on - * any computer system, and to alter it and redistribute it freely, subject - * to the following restrictions: - * 1. The authors are not responsible for the consequences of use of this - * software, no matter how awful, even if they arise from flaws in it. - * 2. The origin of this software must not be misrepresented, either by - * explicit claim or by omission. Since few users ever read sources, - * credits must appear in the documentation. - * 3. Altered versions must be plainly marked as such, and must not be - * misrepresented as being the original software. Since few users - * ever read sources, credits must appear in the documentation. - * 4. This notice may not be removed or altered. - */ - -/* -** Unix system-dependant routines for editline library. -*/ -#include -#include "editline.h" - -#ifdef HAVE_TERMIOS_H -#include -#else -#include -#endif - -RCSID("$Id: sysunix.c,v 1.4 1999/04/08 13:08:24 joda Exp $"); - -#ifdef HAVE_TERMIOS_H - -void -rl_ttyset(int Reset) -{ - static struct termios old; - struct termios new; - - if (Reset == 0) { - tcgetattr(0, &old); - rl_erase = old.c_cc[VERASE]; - rl_kill = old.c_cc[VKILL]; - rl_eof = old.c_cc[VEOF]; - rl_intr = old.c_cc[VINTR]; - rl_quit = old.c_cc[VQUIT]; - - new = old; - new.c_cc[VINTR] = -1; - new.c_cc[VQUIT] = -1; - new.c_lflag &= ~(ECHO | ICANON); - new.c_iflag &= ~(ISTRIP | INPCK); - new.c_cc[VMIN] = 1; - new.c_cc[VTIME] = 0; - tcsetattr(0, TCSANOW, &new); - } - else - tcsetattr(0, TCSANOW, &old); -} - -#else /* !HAVE_TERMIOS_H */ - -void -rl_ttyset(int Reset) -{ - static struct sgttyb old; - struct sgttyb new; - - if (Reset == 0) { - ioctl(0, TIOCGETP, &old); - rl_erase = old.sg_erase; - rl_kill = old.sg_kill; - new = old; - new.sg_flags &= ~(ECHO | ICANON); - new.sg_flags &= ~(ISTRIP | INPCK); - ioctl(0, TIOCSETP, &new); - } else { - ioctl(0, TIOCSETP, &old); - } -} -#endif /* HAVE_TERMIOS_H */ - -void -rl_add_slash(char *path, char *p) -{ - struct stat Sb; - - if (stat(path, &Sb) >= 0) - strcat(p, S_ISDIR(Sb.st_mode) ? "/" : " "); -} diff --git a/crypto/heimdal/lib/editline/testit.c b/crypto/heimdal/lib/editline/testit.c deleted file mode 100644 index c8ab847..0000000 --- a/crypto/heimdal/lib/editline/testit.c +++ /dev/null @@ -1,78 +0,0 @@ -/* $Revision: 1.3 $ -** -** A "micro-shell" to test editline library. -** If given any arguments, commands aren't executed. -*/ -#if defined(HAVE_CONFIG_H) -#include -#endif -#include -#include -#ifdef HAVE_ERRNO_H -#include -#endif -#include - -#include "editline.h" - -static int n_flag = 0; -static int version_flag = 0; -static int help_flag = 0; - -static struct getargs args[] = { - {"dry-run", 'n', arg_flag, &n_flag, - "do not run commands", NULL }, - {"version", 0, arg_flag, &version_flag, - "print version", NULL }, - {"help", 0, arg_flag, &help_flag, - NULL, NULL } -}; - -static void -usage (int ret) -{ - arg_printusage (args, - sizeof(args)/sizeof(*args), - NULL, - ""); - exit (ret); -} - -int -main(int argc, char **argv) -{ - char *p; - int optind = 0; - - setprogname (argv[0]); - - if(getarg(args, sizeof(args) / sizeof(args[0]), argc, argv, &optind)) - usage(1); - - if (help_flag) - usage (0); - - if(version_flag){ - print_version(NULL); - exit(0); - } - - argc -= optind; - argv += optind; - - while ((p = readline("testit> ")) != NULL) { - (void)printf("\t\t\t|%s|\n", p); - if (!n_flag) { - if (strncmp(p, "cd ", 3) == 0) { - if (chdir(&p[3]) < 0) - perror(&p[3]); - } else if (system(p) != 0) { - perror(p); - } - } - add_history(p); - free(p); - } - exit(0); - /* NOTREACHED */ -} diff --git a/crypto/heimdal/lib/editline/unix.h b/crypto/heimdal/lib/editline/unix.h deleted file mode 100644 index fe6beed..0000000 --- a/crypto/heimdal/lib/editline/unix.h +++ /dev/null @@ -1,22 +0,0 @@ -/* $Revision: 1.1 $ -** -** Editline system header file for Unix. -*/ - -#define CRLF "\r\n" -#define FORWARD STATIC - -#include -#include - -#if defined(USE_DIRENT) -#include -typedef struct dirent DIRENTRY; -#else -#include -typedef struct direct DIRENTRY; -#endif /* defined(USE_DIRENT) */ - -#if !defined(S_ISDIR) -#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) -#endif /* !defined(S_ISDIR) */ diff --git a/crypto/heimdal/lib/otp/ChangeLog b/crypto/heimdal/lib/otp/ChangeLog deleted file mode 100644 index b9d36ef..0000000 --- a/crypto/heimdal/lib/otp/ChangeLog +++ /dev/null @@ -1,85 +0,0 @@ -2002-05-20 Johan Danielsson - - * otp_db.c: fix ndbm test - -2002-05-17 Johan Danielsson - - * Makefile.am: add hooks for ndbm_wrap - - * otp_db.c: use ndbm_wrap - -2001-07-12 Assar Westerlund - - * Makefile.am: add required library dependencies - -2001-01-30 Assar Westerlund - - * Makefile.am (libotp_la_LDFLAGS): bump version to 1:2:1 - -2001-01-29 Assar Westerlund - - * otp_md.c: update to new md4/md5/sha API - -2000-12-11 Assar Westerlund - - * Makefile.am (INCLUDES): add krb4 includes here, which are - somewhat bogusly used when linking against libdes supplied by krb4 - -2000-07-25 Johan Danielsson - - * Makefile.am: bump version to 1:1:1 - -2000-07-01 Assar Westerlund - - * const-ify - -2000-02-07 Assar Westerlund - - * Makefile.am: update version to 1:0:1 - -2000-01-26 Assar Westerlund - - * otp_md.c: update to pseudo-standard APIs for md4,md5,sha. - * otp_md.c: start using the pseudo-standard APIs for the hash - functions - -1999-10-20 Assar Westerlund - - * Makefile.am: set version to 0:1:0 - -Fri Mar 19 14:52:48 1999 Johan Danielsson - - * Makefile.am: add version-info - -Thu Mar 18 11:24:19 1999 Johan Danielsson - - * Makefile.am: include Makefile.am.common - -Sat Mar 13 22:27:10 1999 Assar Westerlund - - * otp_parse.c: unsigned-ify - -Sun Nov 22 10:44:16 1998 Assar Westerlund - - * Makefile.in (WFLAGS): set - -Mon May 25 05:27:07 1998 Assar Westerlund - - * Makefile.in (clean): try to remove shared library debris - -Sat May 23 20:54:28 1998 Assar Westerlund - - * Makefile.am: link with DBLIB - -Sun Apr 19 09:59:46 1998 Assar Westerlund - - * Makefile.in: add symlink magic for linux - -Sat Feb 7 07:27:18 1998 Assar Westerlund - - * otp_db.c (otp_put): make sure we don't overrun `buf' - -Sun Nov 9 07:14:59 1997 Assar Westerlund - - * otp_locl.h: use xdbm.h - diff --git a/crypto/heimdal/lib/otp/Makefile b/crypto/heimdal/lib/otp/Makefile deleted file mode 100644 index d656086..0000000 --- a/crypto/heimdal/lib/otp/Makefile +++ /dev/null @@ -1,682 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# lib/otp/Makefile. Generated from Makefile.in by configure. - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -# $Id: Makefile.am,v 1.22 2002/08/13 14:02:54 joda Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = /bin/sh - -srcdir = . -top_srcdir = ../.. - -prefix = /usr/heimdal -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = /etc -sharedstatedir = ${prefix}/com -localstatedir = /var/heimdal -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/heimdal -pkglibdir = $(libdir)/heimdal -pkgincludedir = $(includedir)/heimdal -top_builddir = ../.. - -ACLOCAL = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoconf -AUTOMAKE = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = -host_triplet = i386-unknown-freebsd5.0 - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AIX_EXTRA_KAFS = -AMTAR = ${SHELL} /usr/home/nectar/devel/heimdal/missing --run tar -AS = @AS@ -AWK = gawk -CANONICAL_HOST = i386-unknown-freebsd5.0 -CATMAN = /usr/bin/nroff -mdoc $< > $@ -CATMANEXT = $$section -CC = gcc -COMPILE_ET = compile_et -CPP = gcc -E -DBLIB = -DEPDIR = .deps -DIR_com_err = -DIR_des = -DIR_roken = roken -DLLTOOL = @DLLTOOL@ -ECHO = echo -EXTRA_LIB45 = -GROFF = /usr/bin/groff -INCLUDES_roken = -I$(top_builddir)/lib/roken -I$(top_srcdir)/lib/roken -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -LEX = flex - -LEXLIB = -lfl -LEX_OUTPUT_ROOT = lex.yy -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = -LIB_NDBM = -LIB_com_err = -lcom_err -LIB_com_err_a = -LIB_com_err_so = -LIB_des = -lcrypto -LIB_des_a = -lcrypto -LIB_des_appl = -lcrypto -LIB_des_so = -lcrypto -LIB_kdb = -LIB_otp = $(top_builddir)/lib/otp/libotp.la -LIB_roken = $(top_builddir)/lib/vers/libvers.la $(top_builddir)/lib/roken/libroken.la $(LIB_crypt) $(LIB_dbopen) -LIB_security = -LN_S = ln -s -LTLIBOBJS = copyhostent.lo ecalloc.lo emalloc.lo erealloc.lo estrdup.lo strlwr.lo strndup.lo strnlen.lo strsep_copy.lo strupr.lo -NEED_WRITEAUTH_FALSE = -NEED_WRITEAUTH_TRUE = # -NROFF = /usr/bin/nroff -OBJDUMP = @OBJDUMP@ -PACKAGE = heimdal -RANLIB = ranlib -STRIP = strip -VERSION = 0.4f -VOID_RETSIGTYPE = -WFLAGS = -Wall -Wmissing-prototypes -Wpointer-arith -Wbad-function-cast -Wmissing-declarations -Wnested-externs -WFLAGS_NOIMPLICITINT = -WFLAGS_NOUNUSED = -X_CFLAGS = -I/usr/X11R6/include -X_EXTRA_LIBS = -X_LIBS = -L/usr/X11R6/lib -X_PRE_LIBS = -lSM -lICE -YACC = bison -y -am__include = include -am__quote = -dpagaix_cflags = -D_THREAD_SAFE -D_AIX_PTHREADS_D7 -D_AIX32_THREADS=1 -D_AES_SOURCE -D_AIX41 -I/usr/include/dce -dpagaix_ldadd = -L/usr/lib/threads -ldcelibc_r -ldcepthreads -lpthreads_compat lpthreads -lc_r -dpagaix_ldflags = -Wl,-bI:dfspag.exp -install_sh = /usr/home/nectar/devel/heimdal/install-sh - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_des) $(ROKEN_RENAME) - -ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = -lXau -LIB_crypt = -lcrypt -LIB_dbm_firstkey = -LIB_dbopen = -LIB_dlopen = -LIB_dn_expand = -LIB_el_init = -ledit -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = -LIB_getsockopt = -LIB_logout = -lutil -LIB_logwtmp = -lutil -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = -lutil -LIB_pidfile = -LIB_res_search = -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = -LIB_socket = -LIB_syslog = -LIB_tgetent = -ltermcap - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = -LIB_hesiod = - -INCLUDE_krb4 = -LIB_krb4 = - -INCLUDE_openldap = -LIB_openldap = - -INCLUDE_readline = -LIB_readline = $(top_builddir)/lib/editline/libel_compat.la $(LIB_el_init) $(LIB_tgetent) - -NROFF_MAN = groff -mandoc -Tascii - -#LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ - $(top_builddir)/lib/asn1/libasn1.la - -LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -#LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -noinst_PROGRAMS = otptest - -check_PROGRAMS = otptest - -otptest_LDADD = libotp.la - -include_HEADERS = otp.h - -lib_LTLIBRARIES = libotp.la -libotp_la_LDFLAGS = -version-info 1:3:1 -libotp_la_LIBADD = $(LIB_des) $(LIB_roken) $(LIB_NDBM) - -#ndbm_wrap = ndbm_wrap.c ndbm_wrap.h -ndbm_wrap = - -libotp_la_SOURCES = \ - otp.c \ - otp_challenge.c \ - otp_db.c \ - otp_md.c \ - otp_parse.c \ - otp_print.c \ - otp_verify.c \ - otp_locl.h \ - otp_md.h \ - roken_rename.h \ - $(ndbm_wrap) \ - $(ROKEN_SRCS) - - -ROKEN_SRCS = snprintf.c strcasecmp.c strncasecmp.c strlwr.c -subdir = lib/otp -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(lib_LTLIBRARIES) - -libotp_la_DEPENDENCIES = -#am__objects_1 = ndbm_wrap.lo -am__objects_1 = -am__objects_2 = snprintf.lo strcasecmp.lo \ - strncasecmp.lo strlwr.lo -am_libotp_la_OBJECTS = otp.lo otp_challenge.lo otp_db.lo otp_md.lo \ - otp_parse.lo otp_print.lo otp_verify.lo $(am__objects_1) \ - $(am__objects_2) -libotp_la_OBJECTS = $(am_libotp_la_OBJECTS) -check_PROGRAMS = otptest$(EXEEXT) -noinst_PROGRAMS = otptest$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -otptest_SOURCES = otptest.c -otptest_OBJECTS = otptest.$(OBJEXT) -otptest_DEPENDENCIES = libotp.la -otptest_LDFLAGS = - -DEFS = -DHAVE_CONFIG_H -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = -LDFLAGS = -LIBS = -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = -DINET6 -g -O2 -DIST_SOURCES = $(libotp_la_SOURCES) otptest.c -HEADERS = $(include_HEADERS) - -DIST_COMMON = $(include_HEADERS) ChangeLog Makefile.am Makefile.in -SOURCES = $(libotp_la_SOURCES) otptest.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign lib/otp/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libLTLIBRARIES_INSTALL = $(INSTALL) -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libdir) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ - else :; fi; \ - done - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libotp.la: $(libotp_la_OBJECTS) $(libotp_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libotp_la_LDFLAGS) $(libotp_la_OBJECTS) $(libotp_la_LIBADD) $(LIBS) - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -otptest$(EXEEXT): $(otptest_OBJECTS) $(otptest_DEPENDENCIES) - @rm -f otptest$(EXEEXT) - $(LINK) $(otptest_LDFLAGS) $(otptest_OBJECTS) $(otptest_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: -includeHEADERS_INSTALL = $(INSTALL_HEADER) -install-includeHEADERS: $(include_HEADERS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(includedir) - @list='$(include_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ - $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ - done - -uninstall-includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ - rm -f $(DESTDIR)$(includedir)/$$f; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ - clean-libtool clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-includeHEADERS - -install-exec-am: install-libLTLIBRARIES - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am info info-am install install-am install-data \ - install-data-am install-data-local install-exec install-exec-am \ - install-includeHEADERS install-info install-info-am \ - install-libLTLIBRARIES install-man install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -$(libotp_la_OBJECTS): $(ndbm_wrap) - -ndbm_wrap.c: - $(LN_S) $(srcdir)/../roken/ndbm_wrap.c . -ndbm_wrap.h: - (echo '#define dbm_rename(X) __otp_ ## X'; cat $(srcdir)/../roken/ndbm_wrap.h) > ndbm_wrap.h - -snprintf.c: - $(LN_S) $(srcdir)/../roken/snprintf.c . -strcasecmp.c: - $(LN_S) $(srcdir)/../roken/strcasecmp.c . -strncasecmp.c: - $(LN_S) $(srcdir)/../roken/strncasecmp.c . -strlwr.c: - $(LN_S) $(srcdir)/../roken/strlwr.c . -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/lib/otp/Makefile.am b/crypto/heimdal/lib/otp/Makefile.am deleted file mode 100644 index 8e24251..0000000 --- a/crypto/heimdal/lib/otp/Makefile.am +++ /dev/null @@ -1,58 +0,0 @@ -# $Id: Makefile.am,v 1.22 2002/08/13 14:02:54 joda Exp $ - -include $(top_srcdir)/Makefile.am.common - -INCLUDES += $(INCLUDE_des) $(ROKEN_RENAME) - -noinst_PROGRAMS = otptest - -check_PROGRAMS = otptest - -otptest_LDADD = libotp.la - -include_HEADERS = otp.h - -lib_LTLIBRARIES = libotp.la -libotp_la_LDFLAGS = -version-info 1:3:1 -libotp_la_LIBADD = $(LIB_des) $(LIB_roken) $(LIB_NDBM) - -if HAVE_DB3 -ndbm_wrap = ndbm_wrap.c ndbm_wrap.h -else -ndbm_wrap = -endif - -libotp_la_SOURCES = \ - otp.c \ - otp_challenge.c \ - otp_db.c \ - otp_md.c \ - otp_parse.c \ - otp_print.c \ - otp_verify.c \ - otp_locl.h \ - otp_md.h \ - roken_rename.h \ - $(ndbm_wrap) \ - $(ROKEN_SRCS) - -if do_roken_rename -ROKEN_SRCS = snprintf.c strcasecmp.c strncasecmp.c strlwr.c -endif - -$(libotp_la_OBJECTS): $(ndbm_wrap) - -ndbm_wrap.c: - $(LN_S) $(srcdir)/../roken/ndbm_wrap.c . -ndbm_wrap.h: - (echo '#define dbm_rename(X) __otp_ ## X'; cat $(srcdir)/../roken/ndbm_wrap.h) > ndbm_wrap.h - - -snprintf.c: - $(LN_S) $(srcdir)/../roken/snprintf.c . -strcasecmp.c: - $(LN_S) $(srcdir)/../roken/strcasecmp.c . -strncasecmp.c: - $(LN_S) $(srcdir)/../roken/strncasecmp.c . -strlwr.c: - $(LN_S) $(srcdir)/../roken/strlwr.c . diff --git a/crypto/heimdal/lib/otp/Makefile.in b/crypto/heimdal/lib/otp/Makefile.in deleted file mode 100644 index 60278b5..0000000 --- a/crypto/heimdal/lib/otp/Makefile.in +++ /dev/null @@ -1,682 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# $Id: Makefile.am,v 1.22 2002/08/13 14:02:54 joda Exp $ - -# $Id: Makefile.am.common,v 1.5 2002/05/19 18:35:37 joda Exp $ - -# $Id: Makefile.am.common,v 1.36 2002/08/19 16:10:25 joda Exp $ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = ../.. - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -host_alias = @host_alias@ -host_triplet = @host@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@ -AMTAR = @AMTAR@ -AS = @AS@ -AWK = @AWK@ -CANONICAL_HOST = @CANONICAL_HOST@ -CATMAN = @CATMAN@ -CATMANEXT = @CATMANEXT@ -CC = @CC@ -COMPILE_ET = @COMPILE_ET@ -CPP = @CPP@ -DBLIB = @DBLIB@ -DEPDIR = @DEPDIR@ -DIR_com_err = @DIR_com_err@ -DIR_des = @DIR_des@ -DIR_roken = @DIR_roken@ -DLLTOOL = @DLLTOOL@ -ECHO = @ECHO@ -EXTRA_LIB45 = @EXTRA_LIB45@ -GROFF = @GROFF@ -INCLUDES_roken = @INCLUDES_roken@ -INCLUDE_ = @INCLUDE_@ -INCLUDE_des = @INCLUDE_des@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LEX = @LEX@ - -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBTOOL = @LIBTOOL@ -LIB_ = @LIB_@ -LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@ -LIB_NDBM = @LIB_NDBM@ -LIB_com_err = @LIB_com_err@ -LIB_com_err_a = @LIB_com_err_a@ -LIB_com_err_so = @LIB_com_err_so@ -LIB_des = @LIB_des@ -LIB_des_a = @LIB_des_a@ -LIB_des_appl = @LIB_des_appl@ -LIB_des_so = @LIB_des_so@ -LIB_kdb = @LIB_kdb@ -LIB_otp = @LIB_otp@ -LIB_roken = @LIB_roken@ -LIB_security = @LIB_security@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -NEED_WRITEAUTH_FALSE = @NEED_WRITEAUTH_FALSE@ -NEED_WRITEAUTH_TRUE = @NEED_WRITEAUTH_TRUE@ -NROFF = @NROFF@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -RANLIB = @RANLIB@ -STRIP = @STRIP@ -VERSION = @VERSION@ -VOID_RETSIGTYPE = @VOID_RETSIGTYPE@ -WFLAGS = @WFLAGS@ -WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@ -WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -YACC = @YACC@ -am__include = @am__include@ -am__quote = @am__quote@ -dpagaix_cflags = @dpagaix_cflags@ -dpagaix_ldadd = @dpagaix_ldadd@ -dpagaix_ldflags = @dpagaix_ldflags@ -install_sh = @install_sh@ - -AUTOMAKE_OPTIONS = foreign no-dependencies 1.6 - -SUFFIXES = .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 - -INCLUDES = -I$(top_builddir)/include $(INCLUDES_roken) $(INCLUDE_des) $(ROKEN_RENAME) - -@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME - -AM_CFLAGS = $(WFLAGS) - -CP = cp - -buildinclude = $(top_builddir)/include - -LIB_XauReadAuth = @LIB_XauReadAuth@ -LIB_crypt = @LIB_crypt@ -LIB_dbm_firstkey = @LIB_dbm_firstkey@ -LIB_dbopen = @LIB_dbopen@ -LIB_dlopen = @LIB_dlopen@ -LIB_dn_expand = @LIB_dn_expand@ -LIB_el_init = @LIB_el_init@ -LIB_getattr = @LIB_getattr@ -LIB_gethostbyname = @LIB_gethostbyname@ -LIB_getpwent_r = @LIB_getpwent_r@ -LIB_getpwnam_r = @LIB_getpwnam_r@ -LIB_getsockopt = @LIB_getsockopt@ -LIB_logout = @LIB_logout@ -LIB_logwtmp = @LIB_logwtmp@ -LIB_odm_initialize = @LIB_odm_initialize@ -LIB_openpty = @LIB_openpty@ -LIB_pidfile = @LIB_pidfile@ -LIB_res_search = @LIB_res_search@ -LIB_setpcred = @LIB_setpcred@ -LIB_setsockopt = @LIB_setsockopt@ -LIB_socket = @LIB_socket@ -LIB_syslog = @LIB_syslog@ -LIB_tgetent = @LIB_tgetent@ - -HESIODLIB = @HESIODLIB@ -HESIODINCLUDE = @HESIODINCLUDE@ -INCLUDE_hesiod = @INCLUDE_hesiod@ -LIB_hesiod = @LIB_hesiod@ - -INCLUDE_krb4 = @INCLUDE_krb4@ -LIB_krb4 = @LIB_krb4@ - -INCLUDE_openldap = @INCLUDE_openldap@ -LIB_openldap = @LIB_openldap@ - -INCLUDE_readline = @INCLUDE_readline@ -LIB_readline = @LIB_readline@ - -NROFF_MAN = groff -mandoc -Tascii - -@KRB4_TRUE@LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS) - -@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \ -@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la - -@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la - -@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la - -noinst_PROGRAMS = otptest - -check_PROGRAMS = otptest - -otptest_LDADD = libotp.la - -include_HEADERS = otp.h - -lib_LTLIBRARIES = libotp.la -libotp_la_LDFLAGS = -version-info 1:3:1 -libotp_la_LIBADD = $(LIB_des) $(LIB_roken) $(LIB_NDBM) - -@HAVE_DB3_TRUE@ndbm_wrap = ndbm_wrap.c ndbm_wrap.h -@HAVE_DB3_FALSE@ndbm_wrap = - -libotp_la_SOURCES = \ - otp.c \ - otp_challenge.c \ - otp_db.c \ - otp_md.c \ - otp_parse.c \ - otp_print.c \ - otp_verify.c \ - otp_locl.h \ - otp_md.h \ - roken_rename.h \ - $(ndbm_wrap) \ - $(ROKEN_SRCS) - - -@do_roken_rename_TRUE@ROKEN_SRCS = snprintf.c strcasecmp.c strncasecmp.c strlwr.c -subdir = lib/otp -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/include/config.h -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(lib_LTLIBRARIES) - -libotp_la_DEPENDENCIES = -@HAVE_DB3_TRUE@am__objects_1 = ndbm_wrap.lo -@HAVE_DB3_FALSE@am__objects_1 = -@do_roken_rename_TRUE@am__objects_2 = snprintf.lo strcasecmp.lo \ -@do_roken_rename_TRUE@ strncasecmp.lo strlwr.lo -am_libotp_la_OBJECTS = otp.lo otp_challenge.lo otp_db.lo otp_md.lo \ - otp_parse.lo otp_print.lo otp_verify.lo $(am__objects_1) \ - $(am__objects_2) -libotp_la_OBJECTS = $(am_libotp_la_OBJECTS) -check_PROGRAMS = otptest$(EXEEXT) -noinst_PROGRAMS = otptest$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) - -otptest_SOURCES = otptest.c -otptest_OBJECTS = otptest.$(OBJEXT) -otptest_DEPENDENCIES = libotp.la -otptest_LDFLAGS = - -DEFS = @DEFS@ -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -depcomp = -am__depfiles_maybe = -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ - $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ -DIST_SOURCES = $(libotp_la_SOURCES) otptest.c -HEADERS = $(include_HEADERS) - -DIST_COMMON = $(include_HEADERS) ChangeLog Makefile.am Makefile.in -SOURCES = $(libotp_la_SOURCES) otptest.c - -all: all-am - -.SUFFIXES: -.SUFFIXES: .et .h .x .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .lo .o .obj -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign lib/otp/Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) -libLTLIBRARIES_INSTALL = $(INSTALL) -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(libdir) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ - $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ - else :; fi; \ - done - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test -z "$dir" && dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libotp.la: $(libotp_la_OBJECTS) $(libotp_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libotp_la_LDFLAGS) $(libotp_la_OBJECTS) $(libotp_la_LIBADD) $(LIBS) - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -otptest$(EXEEXT): $(otptest_OBJECTS) $(otptest_DEPENDENCIES) - @rm -f otptest$(EXEEXT) - $(LINK) $(otptest_LDFLAGS) $(otptest_OBJECTS) $(otptest_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) core *.core - -distclean-compile: - -rm -f *.tab.c - -.c.o: - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< - -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.c.lo: - $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: -includeHEADERS_INSTALL = $(INSTALL_HEADER) -install-includeHEADERS: $(include_HEADERS) - @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(includedir) - @list='$(include_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \ - $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \ - done - -uninstall-includeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ - echo " rm -f $(DESTDIR)$(includedir)/$$f"; \ - rm -f $(DESTDIR)$(includedir)/$$f; \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -top_distdir = ../.. -distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) - -distdir: $(DISTFILES) - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) all-local - -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir) - -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ - clean-libtool clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -info: info-am - -info-am: - -install-data-am: install-data-local install-includeHEADERS - -install-exec-am: install-libLTLIBRARIES - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -uninstall-am: uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES - -.PHONY: GTAGS all all-am all-local check check-am check-local clean \ - clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ - clean-libtool clean-noinstPROGRAMS distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am info info-am install install-am install-data \ - install-data-am install-data-local install-exec install-exec-am \ - install-includeHEADERS install-info install-info-am \ - install-libLTLIBRARIES install-man install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool tags uninstall \ - uninstall-am uninstall-includeHEADERS uninstall-info-am \ - uninstall-libLTLIBRARIES - - -install-suid-programs: - @foo='$(bin_SUIDS)'; \ - for file in $$foo; do \ - x=$(DESTDIR)$(bindir)/$$file; \ - if chown 0:0 $$x && chmod u+s $$x; then :; else \ - echo "*"; \ - echo "* Failed to install $$x setuid root"; \ - echo "*"; \ - fi; done - -install-exec-hook: install-suid-programs - -install-build-headers:: $(include_HEADERS) $(build_HEADERZ) - @foo='$(include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \ - for f in $$foo; do \ - f=`basename $$f`; \ - if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \ - else file="$$f"; fi; \ - if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \ - : ; else \ - echo " $(CP) $$file $(buildinclude)/$$f"; \ - $(CP) $$file $(buildinclude)/$$f; \ - fi ; \ - done - -all-local: install-build-headers - -check-local:: - @if test '$(CHECK_LOCAL)'; then \ - foo='$(CHECK_LOCAL)'; else \ - foo='$(PROGRAMS)'; fi; \ - if test "$$foo"; then \ - failed=0; all=0; \ - for i in $$foo; do \ - all=`expr $$all + 1`; \ - if ./$$i --version > /dev/null 2>&1; then \ - echo "PASS: $$i"; \ - else \ - echo "FAIL: $$i"; \ - failed=`expr $$failed + 1`; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - fi - -.x.c: - @cmp -s $< $@ 2> /dev/null || cp $< $@ -#NROFF_MAN = nroff -man -.1.cat1: - $(NROFF_MAN) $< > $@ -.3.cat3: - $(NROFF_MAN) $< > $@ -.5.cat5: - $(NROFF_MAN) $< > $@ -.8.cat8: - $(NROFF_MAN) $< > $@ - -dist-cat1-mans: - @foo='$(man1_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.1) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat3-mans: - @foo='$(man3_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.3) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat5-mans: - @foo='$(man5_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.5) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-cat8-mans: - @foo='$(man8_MANS)'; \ - bar='$(man_MANS)'; \ - for i in $$bar; do \ - case $$i in \ - *.8) foo="$$foo $$i";; \ - esac; done ;\ - for i in $$foo; do \ - x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \ - echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \ - $(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \ - done - -dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans - -install-cat-mans: - $(SHELL) $(top_srcdir)/cf/install-catman.sh "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS) - -install-data-local: install-cat-mans - -.et.h: - $(COMPILE_ET) $< -.et.c: - $(COMPILE_ET) $< - -$(libotp_la_OBJECTS): $(ndbm_wrap) - -ndbm_wrap.c: - $(LN_S) $(srcdir)/../roken/ndbm_wrap.c . -ndbm_wrap.h: - (echo '#define dbm_rename(X) __otp_ ## X'; cat $(srcdir)/../roken/ndbm_wrap.h) > ndbm_wrap.h - -snprintf.c: - $(LN_S) $(srcdir)/../roken/snprintf.c . -strcasecmp.c: - $(LN_S) $(srcdir)/../roken/strcasecmp.c . -strncasecmp.c: - $(LN_S) $(srcdir)/../roken/strncasecmp.c . -strlwr.c: - $(LN_S) $(srcdir)/../roken/strlwr.c . -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/crypto/heimdal/lib/otp/otp.c b/crypto/heimdal/lib/otp/otp.c deleted file mode 100644 index 746f3cb..0000000 --- a/crypto/heimdal/lib/otp/otp.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp.c,v 1.8 2000/07/12 00:26:43 assar Exp $"); -#endif - -#include "otp_locl.h" -#include "otp_md.h" - -static OtpAlgorithm algorithms[] = { - {OTP_ALG_MD4, "md4", 16, otp_md4_hash, otp_md4_init, otp_md4_next}, - {OTP_ALG_MD5, "md5", 16, otp_md5_hash, otp_md5_init, otp_md5_next}, - {OTP_ALG_SHA, "sha", 20, otp_sha_hash, otp_sha_init, otp_sha_next} -}; - -OtpAlgorithm * -otp_find_alg (char *name) -{ - int i; - - for (i = 0; i < sizeof(algorithms)/sizeof(*algorithms); ++i) - if (strcmp (name, algorithms[i].name) == 0) - return &algorithms[i]; - return NULL; -} - -char * -otp_error (OtpContext *o) -{ - return o->err; -} diff --git a/crypto/heimdal/lib/otp/otp.h b/crypto/heimdal/lib/otp/otp.h deleted file mode 100644 index e813458..0000000 --- a/crypto/heimdal/lib/otp/otp.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: otp.h,v 1.19 2000/07/12 00:26:43 assar Exp $ */ - -#ifndef _OTP_H -#define _OTP_H - -#include -#include - -enum {OTPKEYSIZE = 8}; - -typedef unsigned char OtpKey[OTPKEYSIZE]; - -#define OTP_MIN_PASSPHRASE 10 -#define OTP_MAX_PASSPHRASE 63 - -#define OTP_USER_TIMEOUT 120 -#define OTP_DB_TIMEOUT 60 - -#define OTP_HEXPREFIX "hex:" -#define OTP_WORDPREFIX "word:" - -typedef enum { OTP_ALG_MD4, OTP_ALG_MD5, OTP_ALG_SHA } OtpAlgID; - -#define OTP_ALG_DEFAULT "md5" - -typedef struct { - OtpAlgID id; - char *name; - int hashsize; - int (*hash)(const char *s, size_t len, unsigned char *res); - int (*init)(OtpKey key, const char *pwd, const char *seed); - int (*next)(OtpKey key); -} OtpAlgorithm; - -typedef struct { - char *user; - OtpAlgorithm *alg; - unsigned n; - char seed[17]; - OtpKey key; - int challengep; - time_t lock_time; - char *err; -} OtpContext; - -OtpAlgorithm *otp_find_alg (char *name); -void otp_print_stddict (OtpKey key, char *str, size_t sz); -void otp_print_hex (OtpKey key, char *str, size_t sz); -void otp_print_stddict_extended (OtpKey key, char *str, size_t sz); -void otp_print_hex_extended (OtpKey key, char *str, size_t sz); -unsigned otp_checksum (OtpKey key); -int otp_parse_hex (OtpKey key, const char *); -int otp_parse_stddict (OtpKey key, const char *); -int otp_parse_altdict (OtpKey key, const char *, OtpAlgorithm *); -int otp_parse (OtpKey key, const char *, OtpAlgorithm *); -int otp_challenge (OtpContext *ctx, char *user, char *str, size_t len); -int otp_verify_user (OtpContext *ctx, const char *passwd); -int otp_verify_user_1 (OtpContext *ctx, const char *passwd); -char *otp_error (OtpContext *ctx); - -void *otp_db_open (void); -void otp_db_close (void *); -int otp_put (void *, OtpContext *ctx); -int otp_get (void *, OtpContext *ctx); -int otp_simple_get (void *, OtpContext *ctx); -int otp_delete (void *, OtpContext *ctx); - -#endif /* _OTP_H */ diff --git a/crypto/heimdal/lib/otp/otp_challenge.c b/crypto/heimdal/lib/otp/otp_challenge.c deleted file mode 100644 index 3507c4f..0000000 --- a/crypto/heimdal/lib/otp/otp_challenge.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp_challenge.c,v 1.10 1999/12/02 16:58:44 joda Exp $"); -#endif - -#include "otp_locl.h" - -int -otp_challenge (OtpContext *ctx, char *user, char *str, size_t len) -{ - void *dbm; - int ret; - - ctx->challengep = 0; - ctx->err = NULL; - ctx->user = malloc(strlen(user) + 1); - if (ctx->user == NULL) { - ctx->err = "Out of memory"; - return -1; - } - strcpy(ctx->user, user); - dbm = otp_db_open (); - if (dbm == NULL) { - ctx->err = "Cannot open database"; - return -1; - } - ret = otp_get (dbm, ctx); - otp_db_close (dbm); - if (ret) - return ret; - snprintf (str, len, - "[ otp-%s %u %s ]", - ctx->alg->name, ctx->n-1, ctx->seed); - ctx->challengep = 1; - return 0; -} diff --git a/crypto/heimdal/lib/otp/otp_db.c b/crypto/heimdal/lib/otp/otp_db.c deleted file mode 100644 index d6f71fe..0000000 --- a/crypto/heimdal/lib/otp/otp_db.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997, 1998 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp_db.c,v 1.19 2002/05/19 22:11:03 joda Exp $"); -#endif - -#include "otp_locl.h" - -#if !defined(HAVE_NDBM) && !defined(HAVE_DB_NDBM) -#include "ndbm_wrap.h" -#endif - -#define RETRIES 5 - -void * -otp_db_open (void) -{ - int lock; - int i; - void *ret; - - for(i = 0; i < RETRIES; ++i) { - struct stat statbuf; - - lock = open (OTP_DB_LOCK, O_WRONLY | O_CREAT | O_EXCL, 0666); - if (lock >= 0) { - close(lock); - break; - } - if (stat (OTP_DB_LOCK, &statbuf) == 0) { - if (time(NULL) - statbuf.st_mtime > OTP_DB_TIMEOUT) - unlink (OTP_DB_LOCK); - else - sleep (1); - } - } - if (i == RETRIES) - return NULL; - ret = dbm_open (OTP_DB, O_RDWR | O_CREAT, 0600); - if (ret == NULL) - unlink (OTP_DB_LOCK); - return ret; -} - -void -otp_db_close (void *dbm) -{ - dbm_close ((DBM *)dbm); - unlink (OTP_DB_LOCK); -} - -/* - * Remove this entry from the database. - * return 0 if ok. - */ - -int -otp_delete (void *v, OtpContext *ctx) -{ - DBM *dbm = (DBM *)v; - datum key; - - key.dsize = strlen(ctx->user); - key.dptr = ctx->user; - - return dbm_delete(dbm, key); -} - -/* - * Read this entry from the database and lock it if lockp. - */ - -static int -otp_get_internal (void *v, OtpContext *ctx, int lockp) -{ - DBM *dbm = (DBM *)v; - datum dat, key; - char *p; - time_t now, then; - - key.dsize = strlen(ctx->user); - key.dptr = ctx->user; - - dat = dbm_fetch (dbm, key); - if (dat.dptr == NULL) { - ctx->err = "Entry not found"; - return -1; - } - p = dat.dptr; - - memcpy (&then, p, sizeof(then)); - ctx->lock_time = then; - if (lockp) { - time(&now); - if (then && now - then < OTP_USER_TIMEOUT) { - ctx->err = "Entry locked"; - return -1; - } - memcpy (p, &now, sizeof(now)); - } - p += sizeof(now); - ctx->alg = otp_find_alg (p); - if (ctx->alg == NULL) { - ctx->err = "Bad algorithm"; - return -1; - } - p += strlen(p) + 1; - { - unsigned char *up = (unsigned char *)p; - ctx->n = (up[0] << 24) | (up[1] << 16) | (up[2] << 8) | up[3]; - } - p += 4; - memcpy (ctx->key, p, OTPKEYSIZE); - p += OTPKEYSIZE; - strlcpy (ctx->seed, p, sizeof(ctx->seed)); - if (lockp) - return dbm_store (dbm, key, dat, DBM_REPLACE); - else - return 0; -} - -/* - * Get and lock. - */ - -int -otp_get (void *v, OtpContext *ctx) -{ - return otp_get_internal (v, ctx, 1); -} - -/* - * Get and don't lock. - */ - -int -otp_simple_get (void *v, OtpContext *ctx) -{ - return otp_get_internal (v, ctx, 0); -} - -/* - * Write this entry to the database. - */ - -int -otp_put (void *v, OtpContext *ctx) -{ - DBM *dbm = (DBM *)v; - datum dat, key; - char buf[1024], *p; - time_t zero = 0; - size_t len, rem; - - key.dsize = strlen(ctx->user); - key.dptr = ctx->user; - - p = buf; - rem = sizeof(buf); - - if (rem < sizeof(zero)) - return -1; - memcpy (p, &zero, sizeof(zero)); - p += sizeof(zero); - rem -= sizeof(zero); - len = strlen(ctx->alg->name) + 1; - - if (rem < len) - return -1; - strcpy (p, ctx->alg->name); - p += len; - rem -= len; - - if (rem < 4) - return -1; - { - unsigned char *up = (unsigned char *)p; - *up++ = (ctx->n >> 24) & 0xFF; - *up++ = (ctx->n >> 16) & 0xFF; - *up++ = (ctx->n >> 8) & 0xFF; - *up++ = (ctx->n >> 0) & 0xFF; - } - p += 4; - rem -= 4; - - if (rem < OTPKEYSIZE) - return -1; - memcpy (p, ctx->key, OTPKEYSIZE); - p += OTPKEYSIZE; - rem -= OTPKEYSIZE; - - len = strlen(ctx->seed) + 1; - if (rem < len) - return -1; - strcpy (p, ctx->seed); - p += len; - rem -= len; - dat.dptr = buf; - dat.dsize = p - buf; - return dbm_store (dbm, key, dat, DBM_REPLACE); -} diff --git a/crypto/heimdal/lib/otp/otp_locl.h b/crypto/heimdal/lib/otp/otp_locl.h deleted file mode 100644 index 18c9284..0000000 --- a/crypto/heimdal/lib/otp/otp_locl.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: otp_locl.h,v 1.12 2002/08/12 15:09:20 joda Exp $ */ - -#include -#include -#include -#include -#include -#include -#ifdef HAVE_SYS_TYPES_H -#include -#endif -#ifdef HAVE_SYS_STAT_H -#include -#endif -#ifdef HAVE_PWD_H -#include -#endif -#ifdef HAVE_FCNTL_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_IO_H -#include -#endif - -#include - -#include - -#include - -#define OTPKEYS "/.otpkeys" - -#define OTP_DB SYSCONFDIR "/otp" -#define OTP_DB_LOCK SYSCONFDIR "/otp-lock" diff --git a/crypto/heimdal/lib/otp/otp_md.c b/crypto/heimdal/lib/otp/otp_md.c deleted file mode 100644 index 3b491bd..0000000 --- a/crypto/heimdal/lib/otp/otp_md.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Copyright (c) 1995 - 2001 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp_md.c,v 1.15 2001/08/22 20:30:32 assar Exp $"); -#endif -#include "otp_locl.h" - -#include "otp_md.h" -#ifdef HAVE_OPENSSL -#include -#include -#include -#else -#include -#include -#include -#endif - -/* - * Compress len bytes from md into key - */ - -static void -compressmd (OtpKey key, unsigned char *md, size_t len) -{ - u_char *p = key; - - memset (p, 0, OTPKEYSIZE); - while(len) { - *p++ ^= *md++; - *p++ ^= *md++; - *p++ ^= *md++; - *p++ ^= *md++; - len -= 4; - if (p == key + OTPKEYSIZE) - p = key; - } -} - -static int -otp_md_init (OtpKey key, - const char *pwd, - const char *seed, - void (*init)(void *), - void (*update)(void *, const void *, size_t), - void (*final)(void *, void *), - void *arg, - unsigned char *res, - size_t ressz) -{ - char *p; - int len; - - len = strlen(pwd) + strlen(seed); - p = malloc (len + 1); - if (p == NULL) - return -1; - strcpy (p, seed); - strlwr (p); - strcat (p, pwd); - (*init)(arg); - (*update)(arg, p, len); - (*final)(res, arg); - free (p); - compressmd (key, res, ressz); - return 0; -} - -static int -otp_md_next (OtpKey key, - void (*init)(void *), - void (*update)(void *, const void *, size_t), - void (*final)(void *, void *), - void *arg, - unsigned char *res, - size_t ressz) -{ - (*init)(arg); - (*update)(arg, key, OTPKEYSIZE); - (*final)(res, arg); - compressmd (key, res, ressz); - return 0; -} - -static int -otp_md_hash (const char *data, - size_t len, - void (*init)(void *), - void (*update)(void *, const void *, size_t), - void (*final)(void *, void *), - void *arg, - unsigned char *res, - size_t ressz) -{ - (*init)(arg); - (*update)(arg, data, len); - (*final)(res, arg); - return 0; -} - -int -otp_md4_init (OtpKey key, const char *pwd, const char *seed) -{ - unsigned char res[16]; - MD4_CTX md4; - - return otp_md_init (key, pwd, seed, - (void (*)(void *))MD4_Init, - (void (*)(void *, const void *, size_t))MD4_Update, - (void (*)(void *, void *))MD4_Final, - &md4, res, sizeof(res)); -} - -int -otp_md4_hash (const char *data, - size_t len, - unsigned char *res) -{ - MD4_CTX md4; - - return otp_md_hash (data, len, - (void (*)(void *))MD4_Init, - (void (*)(void *, const void *, size_t))MD4_Update, - (void (*)(void *, void *))MD4_Final, - &md4, res, 16); -} - -int -otp_md4_next (OtpKey key) -{ - unsigned char res[16]; - MD4_CTX md4; - - return otp_md_next (key, - (void (*)(void *))MD4_Init, - (void (*)(void *, const void *, size_t))MD4_Update, - (void (*)(void *, void *))MD4_Final, - &md4, res, sizeof(res)); -} - - -int -otp_md5_init (OtpKey key, const char *pwd, const char *seed) -{ - unsigned char res[16]; - MD5_CTX md5; - - return otp_md_init (key, pwd, seed, - (void (*)(void *))MD5_Init, - (void (*)(void *, const void *, size_t))MD5_Update, - (void (*)(void *, void *))MD5_Final, - &md5, res, sizeof(res)); -} - -int -otp_md5_hash (const char *data, - size_t len, - unsigned char *res) -{ - MD5_CTX md5; - - return otp_md_hash (data, len, - (void (*)(void *))MD5_Init, - (void (*)(void *, const void *, size_t))MD5_Update, - (void (*)(void *, void *))MD5_Final, - &md5, res, 16); -} - -int -otp_md5_next (OtpKey key) -{ - unsigned char res[16]; - MD5_CTX md5; - - return otp_md_next (key, - (void (*)(void *))MD5_Init, - (void (*)(void *, const void *, size_t))MD5_Update, - (void (*)(void *, void *))MD5_Final, - &md5, res, sizeof(res)); -} - -/* - * For histerical reasons, in the OTP definition it's said that the - * result from SHA must be stored in little-endian order. See - * draft-ietf-otp-01.txt. - */ - -static void -SHA1_Final_little_endian (void *res, SHA_CTX *m) -{ - unsigned char tmp[20]; - unsigned char *p = res; - int j; - - SHA1_Final (tmp, m); - for (j = 0; j < 20; j += 4) { - p[j] = tmp[j+3]; - p[j+1] = tmp[j+2]; - p[j+2] = tmp[j+1]; - p[j+3] = tmp[j]; - } -} - -int -otp_sha_init (OtpKey key, const char *pwd, const char *seed) -{ - unsigned char res[20]; - SHA_CTX sha1; - - return otp_md_init (key, pwd, seed, - (void (*)(void *))SHA1_Init, - (void (*)(void *, const void *, size_t))SHA1_Update, - (void (*)(void *, void *))SHA1_Final_little_endian, - &sha1, res, sizeof(res)); -} - -int -otp_sha_hash (const char *data, - size_t len, - unsigned char *res) -{ - SHA_CTX sha1; - - return otp_md_hash (data, len, - (void (*)(void *))SHA1_Init, - (void (*)(void *, const void *, size_t))SHA1_Update, - (void (*)(void *, void *))SHA1_Final_little_endian, - &sha1, res, 20); -} - -int -otp_sha_next (OtpKey key) -{ - unsigned char res[20]; - SHA_CTX sha1; - - return otp_md_next (key, - (void (*)(void *))SHA1_Init, - (void (*)(void *, const void *, size_t))SHA1_Update, - (void (*)(void *, void *))SHA1_Final_little_endian, - &sha1, res, sizeof(res)); -} diff --git a/crypto/heimdal/lib/otp/otp_md.h b/crypto/heimdal/lib/otp/otp_md.h deleted file mode 100644 index 5732606..0000000 --- a/crypto/heimdal/lib/otp/otp_md.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: otp_md.h,v 1.7 2000/07/12 00:26:44 assar Exp $ */ - -int otp_md4_init (OtpKey key, const char *pwd, const char *seed); -int otp_md4_hash (const char *, size_t, unsigned char *res); -int otp_md4_next (OtpKey key); - -int otp_md5_init (OtpKey key, const char *pwd, const char *seed); -int otp_md5_hash (const char *, size_t, unsigned char *res); -int otp_md5_next (OtpKey key); - -int otp_sha_init (OtpKey key, const char *pwd, const char *seed); -int otp_sha_hash (const char *, size_t, unsigned char *res); -int otp_sha_next (OtpKey key); diff --git a/crypto/heimdal/lib/otp/otp_parse.c b/crypto/heimdal/lib/otp/otp_parse.c deleted file mode 100644 index cc69de5..0000000 --- a/crypto/heimdal/lib/otp/otp_parse.c +++ /dev/null @@ -1,2515 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp_parse.c,v 1.20 2000/07/01 13:58:38 assar Exp $"); -#endif - -#include "otp_locl.h" - -struct e { - char *s; - unsigned n; -}; - -extern const struct e inv_std_dict[2048]; - -static int -cmp(const void *a, const void *b) -{ - struct e *e1, *e2; - - e1 = (struct e *)a; - e2 = (struct e *)b; - return strcasecmp (e1->s, e2->s); -} - -static int -get_stdword (const char *s, void *v) -{ - struct e e, *r; - - e.s = (char *)s; - e.n = -1; - r = (struct e *) bsearch (&e, inv_std_dict, - sizeof(inv_std_dict)/sizeof(*inv_std_dict), - sizeof(*inv_std_dict), cmp); - if (r) - return r->n; - else - return -1; -} - -static void -compress (OtpKey key, unsigned wn[]) -{ - key[0] = wn[0] >> 3; - key[1] = ((wn[0] & 0x07) << 5) | (wn[1] >> 6); - key[2] = ((wn[1] & 0x3F) << 2) | (wn[2] >> 9); - key[3] = ((wn[2] >> 1) & 0xFF); - key[4] = ((wn[2] & 0x01) << 7) | (wn[3] >> 4); - key[5] = ((wn[3] & 0x0F) << 4) | (wn[4] >> 7); - key[6] = ((wn[4] & 0x7F) << 1) | (wn[5] >> 10); - key[7] = ((wn[5] >> 2) & 0xFF); -} - -static int -get_altword (const char *s, void *a) -{ - OtpAlgorithm *alg = (OtpAlgorithm *)a; - int ret; - unsigned char *res = malloc(alg->hashsize); - - if (res == NULL) - return -1; - alg->hash (s, strlen(s), res); - ret = (unsigned)(res[alg->hashsize - 1]) | - ((res[alg->hashsize - 2] & 0x03) << 8); - free (res); - return ret; -} - -static int -parse_words(unsigned wn[], - const char *str, - int (*convert)(const char *, void *), - void *arg) -{ - unsigned char *w, *wend, c; - int i; - int tmp; - - w = (unsigned char *)str; - for (i = 0; i < 6; ++i) { - while (isspace(*w)) - ++w; - wend = w; - while (isalpha (*wend)) - ++wend; - c = *wend; - *wend = '\0'; - tmp = (*convert)((char *)w, arg); - *wend = c; - w = wend; - if (tmp < 0) - return -1; - wn[i] = tmp; - } - return 0; -} - -static int -otp_parse_internal (OtpKey key, const char *str, - OtpAlgorithm *alg, - int (*convert)(const char *, void *)) -{ - unsigned wn[6]; - - if (parse_words (wn, str, convert, alg)) - return -1; - compress (key, wn); - if (otp_checksum (key) != (wn[5] & 0x03)) - return -1; - return 0; -} - -int -otp_parse_stddict (OtpKey key, const char *str) -{ - return otp_parse_internal (key, str, NULL, get_stdword); -} - -int -otp_parse_altdict (OtpKey key, const char *str, OtpAlgorithm *alg) -{ - return otp_parse_internal (key, str, alg, get_altword); -} - -int -otp_parse_hex (OtpKey key, const char *s) -{ - char buf[17], *b; - int is[8]; - int i; - - b = buf; - while (*s) { - if (strchr ("0123456789ABCDEFabcdef", *s)) { - if (b - buf >= 16) - return -1; - else - *b++ = tolower(*s); - } - s++; - } - *b = '\0'; - if (sscanf (buf, "%2x%2x%2x%2x%2x%2x%2x%2x", - &is[0], &is[1], &is[2], &is[3], &is[4], - &is[5], &is[6], &is[7]) != 8) - return -1; - for (i = 0; i < OTPKEYSIZE; ++i) - key[i] = is[i]; - return 0; -} - -int -otp_parse (OtpKey key, const char *s, OtpAlgorithm *alg) -{ - int ret; - int dohex = 1; - - if (strncmp (s, OTP_HEXPREFIX, strlen(OTP_HEXPREFIX)) == 0) - return otp_parse_hex (key, s + strlen(OTP_HEXPREFIX)); - if (strncmp (s, OTP_WORDPREFIX, strlen(OTP_WORDPREFIX)) == 0) { - s += strlen(OTP_WORDPREFIX); - dohex = 0; - } - - ret = otp_parse_stddict (key, s); - if (ret) - ret = otp_parse_altdict (key, s, alg); - if (ret && dohex) - ret = otp_parse_hex (key, s); - return ret; -} - -const char *const std_dict[2048] = -{ "A", "ABE", "ACE", "ACT", "AD", "ADA", "ADD", -"AGO", "AID", "AIM", "AIR", "ALL", "ALP", "AM", "AMY", -"AN", "ANA", "AND", "ANN", "ANT", "ANY", "APE", "APS", -"APT", "ARC", "ARE", "ARK", "ARM", "ART", "AS", "ASH", -"ASK", "AT", "ATE", "AUG", "AUK", "AVE", "AWE", "AWK", -"AWL", "AWN", "AX", "AYE", "BAD", "BAG", "BAH", "BAM", -"BAN", "BAR", "BAT", "BAY", "BE", "BED", "BEE", "BEG", -"BEN", "BET", "BEY", "BIB", "BID", "BIG", "BIN", "BIT", -"BOB", "BOG", "BON", "BOO", "BOP", "BOW", "BOY", "BUB", -"BUD", "BUG", "BUM", "BUN", "BUS", "BUT", "BUY", "BY", -"BYE", "CAB", "CAL", "CAM", "CAN", "CAP", "CAR", "CAT", -"CAW", "COD", "COG", "COL", "CON", "COO", "COP", "COT", -"COW", "COY", "CRY", "CUB", "CUE", "CUP", "CUR", "CUT", -"DAB", "DAD", "DAM", "DAN", "DAR", "DAY", "DEE", "DEL", -"DEN", "DES", "DEW", "DID", "DIE", "DIG", "DIN", "DIP", -"DO", "DOE", "DOG", "DON", "DOT", "DOW", "DRY", "DUB", -"DUD", "DUE", "DUG", "DUN", "EAR", "EAT", "ED", "EEL", -"EGG", "EGO", "ELI", "ELK", "ELM", "ELY", "EM", "END", -"EST", "ETC", "EVA", "EVE", "EWE", "EYE", "FAD", "FAN", -"FAR", "FAT", "FAY", "FED", "FEE", "FEW", "FIB", "FIG", -"FIN", "FIR", "FIT", "FLO", "FLY", "FOE", "FOG", "FOR", -"FRY", "FUM", "FUN", "FUR", "GAB", "GAD", "GAG", "GAL", -"GAM", "GAP", "GAS", "GAY", "GEE", "GEL", "GEM", "GET", -"GIG", "GIL", "GIN", "GO", "GOT", "GUM", "GUN", "GUS", -"GUT", "GUY", "GYM", "GYP", "HA", "HAD", "HAL", "HAM", -"HAN", "HAP", "HAS", "HAT", "HAW", "HAY", "HE", "HEM", -"HEN", "HER", "HEW", "HEY", "HI", "HID", "HIM", "HIP", -"HIS", "HIT", "HO", "HOB", "HOC", "HOE", "HOG", "HOP", -"HOT", "HOW", "HUB", "HUE", "HUG", "HUH", "HUM", "HUT", -"I", "ICY", "IDA", "IF", "IKE", "ILL", "INK", "INN", -"IO", "ION", "IQ", "IRA", "IRE", "IRK", "IS", "IT", -"ITS", "IVY", "JAB", "JAG", "JAM", "JAN", "JAR", "JAW", -"JAY", "JET", "JIG", "JIM", "JO", "JOB", "JOE", "JOG", -"JOT", "JOY", "JUG", "JUT", "KAY", "KEG", "KEN", "KEY", -"KID", "KIM", "KIN", "KIT", "LA", "LAB", "LAC", "LAD", -"LAG", "LAM", "LAP", "LAW", "LAY", "LEA", "LED", "LEE", -"LEG", "LEN", "LEO", "LET", "LEW", "LID", "LIE", "LIN", -"LIP", "LIT", "LO", "LOB", "LOG", "LOP", "LOS", "LOT", -"LOU", "LOW", "LOY", "LUG", "LYE", "MA", "MAC", "MAD", -"MAE", "MAN", "MAO", "MAP", "MAT", "MAW", "MAY", "ME", -"MEG", "MEL", "MEN", "MET", "MEW", "MID", "MIN", "MIT", -"MOB", "MOD", "MOE", "MOO", "MOP", "MOS", "MOT", "MOW", -"MUD", "MUG", "MUM", "MY", "NAB", "NAG", "NAN", "NAP", -"NAT", "NAY", "NE", "NED", "NEE", "NET", "NEW", "NIB", -"NIIL", "NIP", "NIT", "NO", "NOB", "NOD", "NON", "NOR", -"NOT", "NOV", "NOW", "NU", "NUN", "NUT", "O", "OAF", -"OAK", "OAR", "OAT", "ODD", "ODE", "OF", "OFF", "OFT", -"OH", "OIL", "OK", "OLD", "ON", "ONE", "OR", "ORB", -"ORE", "ORR", "OS", "OTT", "OUR", "OUT", "OVA", "OW", -"OWE", "OWL", "OWN", "OX", "PA", "PAD", "PAL", "PAM", -"PAN", "PAP", "PAR", "PAT", "PAW", "PAY", "PEA", "PEG", -"PEN", "PEP", "PER", "PET", "PEW", "PHI", "PI", "PIE", -"PIN", "PIT", "PLY", "PO", "POD", "POE", "POP", "POT", -"POW", "PRO", "PRY", "PUB", "PUG", "PUN", "PUP", "PUT", -"QUO", "RAG", "RAM", "RAN", "RAP", "RAT", "RAW", "RAY", -"REB", "RED", "REP", "RET", "RIB", "RID", "RIG", "RIM", -"RIO", "RIP", "ROB", "ROD", "ROE", "RON", "ROT", "ROW", -"ROY", "RUB", "RUE", "RUG", "RUM", "RUN", "RYE", "SAC", -"SAD", "SAG", "SAL", "SAM", "SAN", "SAP", "SAT", "SAW", -"SAY", "SEA", "SEC", "SEE", "SEN", "SET", "SEW", "SHE", -"SHY", "SIN", "SIP", "SIR", "SIS", "SIT", "SKI", "SKY", -"SLY", "SO", "SOB", "SOD", "SON", "SOP", "SOW", "SOY", -"SPA", "SPY", "SUB", "SUD", "SUE", "SUM", "SUN", "SUP", -"TAB", "TAD", "TAG", "TAN", "TAP", "TAR", "TEA", "TED", -"TEE", "TEN", "THE", "THY", "TIC", "TIE", "TIM", "TIN", -"TIP", "TO", "TOE", "TOG", "TOM", "TON", "TOO", "TOP", -"TOW", "TOY", "TRY", "TUB", "TUG", "TUM", "TUN", "TWO", -"UN", "UP", "US", "USE", "VAN", "VAT", "VET", "VIE", -"WAD", "WAG", "WAR", "WAS", "WAY", "WE", "WEB", "WED", -"WEE", "WET", "WHO", "WHY", "WIN", "WIT", "WOK", "WON", -"WOO", "WOW", "WRY", "WU", "YAM", "YAP", "YAW", "YE", -"YEA", "YES", "YET", "YOU", "ABED", "ABEL", "ABET", "ABLE", -"ABUT", "ACHE", "ACID", "ACME", "ACRE", "ACTA", "ACTS", "ADAM", -"ADDS", "ADEN", "AFAR", "AFRO", "AGEE", "AHEM", "AHOY", "AIDA", -"AIDE", "AIDS", "AIRY", "AJAR", "AKIN", "ALAN", "ALEC", "ALGA", -"ALIA", "ALLY", "ALMA", "ALOE", "ALSO", "ALTO", "ALUM", "ALVA", -"AMEN", "AMES", "AMID", "AMMO", "AMOK", "AMOS", "AMRA", "ANDY", -"ANEW", "ANNA", "ANNE", "ANTE", "ANTI", "AQUA", "ARAB", "ARCH", -"AREA", "ARGO", "ARID", "ARMY", "ARTS", "ARTY", "ASIA", "ASKS", -"ATOM", "AUNT", "AURA", "AUTO", "AVER", "AVID", "AVIS", "AVON", -"AVOW", "AWAY", "AWRY", "BABE", "BABY", "BACH", "BACK", "BADE", -"BAIL", "BAIT", "BAKE", "BALD", "BALE", "BALI", "BALK", "BALL", -"BALM", "BAND", "BANE", "BANG", "BANK", "BARB", "BARD", "BARE", -"BARK", "BARN", "BARR", "BASE", "BASH", "BASK", "BASS", "BATE", -"BATH", "BAWD", "BAWL", "BEAD", "BEAK", "BEAM", "BEAN", "BEAR", -"BEAT", "BEAU", "BECK", "BEEF", "BEEN", "BEER", "BEET", "BELA", -"BELL", "BELT", "BEND", "BENT", "BERG", "BERN", "BERT", "BESS", -"BEST", "BETA", "BETH", "BHOY", "BIAS", "BIDE", "BIEN", "BILE", -"BILK", "BILL", "BIND", "BING", "BIRD", "BITE", "BITS", "BLAB", -"BLAT", "BLED", "BLEW", "BLOB", "BLOC", "BLOT", "BLOW", "BLUE", -"BLUM", "BLUR", "BOAR", "BOAT", "BOCA", "BOCK", "BODE", "BODY", -"BOGY", "BOHR", "BOIL", "BOLD", "BOLO", "BOLT", "BOMB", "BONA", -"BOND", "BONE", "BONG", "BONN", "BONY", "BOOK", "BOOM", "BOON", -"BOOT", "BORE", "BORG", "BORN", "BOSE", "BOSS", "BOTH", "BOUT", -"BOWL", "BOYD", "BRAD", "BRAE", "BRAG", "BRAN", "BRAY", "BRED", -"BREW", "BRIG", "BRIM", "BROW", "BUCK", "BUDD", "BUFF", "BULB", -"BULK", "BULL", "BUNK", "BUNT", "BUOY", "BURG", "BURL", "BURN", -"BURR", "BURT", "BURY", "BUSH", "BUSS", "BUST", "BUSY", "BYTE", -"CADY", "CAFE", "CAGE", "CAIN", "CAKE", "CALF", "CALL", "CALM", -"CAME", "CANE", "CANT", "CARD", "CARE", "CARL", "CARR", "CART", -"CASE", "CASH", "CASK", "CAST", "CAVE", "CEIL", "CELL", "CENT", -"CERN", "CHAD", "CHAR", "CHAT", "CHAW", "CHEF", "CHEN", "CHEW", -"CHIC", "CHIN", "CHOU", "CHOW", "CHUB", "CHUG", "CHUM", "CITE", -"CITY", "CLAD", "CLAM", "CLAN", "CLAW", "CLAY", "CLOD", "CLOG", -"CLOT", "CLUB", "CLUE", "COAL", "COAT", "COCA", "COCK", "COCO", -"CODA", "CODE", "CODY", "COED", "COIL", "COIN", "COKE", "COLA", -"COLD", "COLT", "COMA", "COMB", "COME", "COOK", "COOL", "COON", -"COOT", "CORD", "CORE", "CORK", "CORN", "COST", "COVE", "COWL", -"CRAB", "CRAG", "CRAM", "CRAY", "CREW", "CRIB", "CROW", "CRUD", -"CUBA", "CUBE", "CUFF", "CULL", "CULT", "CUNY", "CURB", "CURD", -"CURE", "CURL", "CURT", "CUTS", "DADE", "DALE", "DAME", "DANA", -"DANE", "DANG", "DANK", "DARE", "DARK", "DARN", "DART", "DASH", -"DATA", "DATE", "DAVE", "DAVY", "DAWN", "DAYS", "DEAD", "DEAF", -"DEAL", "DEAN", "DEAR", "DEBT", "DECK", "DEED", "DEEM", "DEER", -"DEFT", "DEFY", "DELL", "DENT", "DENY", "DESK", "DIAL", "DICE", -"DIED", "DIET", "DIME", "DINE", "DING", "DINT", "DIRE", "DIRT", -"DISC", "DISH", "DISK", "DIVE", "DOCK", "DOES", "DOLE", "DOLL", -"DOLT", "DOME", "DONE", "DOOM", "DOOR", "DORA", "DOSE", "DOTE", -"DOUG", "DOUR", "DOVE", "DOWN", "DRAB", "DRAG", "DRAM", "DRAW", -"DREW", "DRUB", "DRUG", "DRUM", "DUAL", "DUCK", "DUCT", "DUEL", -"DUET", "DUKE", "DULL", "DUMB", "DUNE", "DUNK", "DUSK", "DUST", -"DUTY", "EACH", "EARL", "EARN", "EASE", "EAST", "EASY", "EBEN", -"ECHO", "EDDY", "EDEN", "EDGE", "EDGY", "EDIT", "EDNA", "EGAN", -"ELAN", "ELBA", "ELLA", "ELSE", "EMIL", "EMIT", "EMMA", "ENDS", -"ERIC", "EROS", "EVEN", "EVER", "EVIL", "EYED", "FACE", "FACT", -"FADE", "FAIL", "FAIN", "FAIR", "FAKE", "FALL", "FAME", "FANG", -"FARM", "FAST", "FATE", "FAWN", "FEAR", "FEAT", "FEED", "FEEL", -"FEET", "FELL", "FELT", "FEND", "FERN", "FEST", "FEUD", "FIEF", -"FIGS", "FILE", "FILL", "FILM", "FIND", "FINE", "FINK", "FIRE", -"FIRM", "FISH", "FISK", "FIST", "FITS", "FIVE", "FLAG", "FLAK", -"FLAM", "FLAT", "FLAW", "FLEA", "FLED", "FLEW", "FLIT", "FLOC", -"FLOG", "FLOW", "FLUB", "FLUE", "FOAL", "FOAM", "FOGY", "FOIL", -"FOLD", "FOLK", "FOND", "FONT", "FOOD", "FOOL", "FOOT", "FORD", -"FORE", "FORK", "FORM", "FORT", "FOSS", "FOUL", "FOUR", "FOWL", -"FRAU", "FRAY", "FRED", "FREE", "FRET", "FREY", "FROG", "FROM", -"FUEL", "FULL", "FUME", "FUND", "FUNK", "FURY", "FUSE", "FUSS", -"GAFF", "GAGE", "GAIL", "GAIN", "GAIT", "GALA", "GALE", "GALL", -"GALT", "GAME", "GANG", "GARB", "GARY", "GASH", "GATE", "GAUL", -"GAUR", "GAVE", "GAWK", "GEAR", "GELD", "GENE", "GENT", "GERM", -"GETS", "GIBE", "GIFT", "GILD", "GILL", "GILT", "GINA", "GIRD", -"GIRL", "GIST", "GIVE", "GLAD", "GLEE", "GLEN", "GLIB", "GLOB", -"GLOM", "GLOW", "GLUE", "GLUM", "GLUT", "GOAD", "GOAL", "GOAT", -"GOER", "GOES", "GOLD", "GOLF", "GONE", "GONG", "GOOD", "GOOF", -"GORE", "GORY", "GOSH", "GOUT", "GOWN", "GRAB", "GRAD", "GRAY", -"GREG", "GREW", "GREY", "GRID", "GRIM", "GRIN", "GRIT", "GROW", -"GRUB", "GULF", "GULL", "GUNK", "GURU", "GUSH", "GUST", "GWEN", -"GWYN", "HAAG", "HAAS", "HACK", "HAIL", "HAIR", "HALE", "HALF", -"HALL", "HALO", "HALT", "HAND", "HANG", "HANK", "HANS", "HARD", -"HARK", "HARM", "HART", "HASH", "HAST", "HATE", "HATH", "HAUL", -"HAVE", "HAWK", "HAYS", "HEAD", "HEAL", "HEAR", "HEAT", "HEBE", -"HECK", "HEED", "HEEL", "HEFT", "HELD", "HELL", "HELM", "HERB", -"HERD", "HERE", "HERO", "HERS", "HESS", "HEWN", "HICK", "HIDE", -"HIGH", "HIKE", "HILL", "HILT", "HIND", "HINT", "HIRE", "HISS", -"HIVE", "HOBO", "HOCK", "HOFF", "HOLD", "HOLE", "HOLM", "HOLT", -"HOME", "HONE", "HONK", "HOOD", "HOOF", "HOOK", "HOOT", "HORN", -"HOSE", "HOST", "HOUR", "HOVE", "HOWE", "HOWL", "HOYT", "HUCK", -"HUED", "HUFF", "HUGE", "HUGH", "HUGO", "HULK", "HULL", "HUNK", -"HUNT", "HURD", "HURL", "HURT", "HUSH", "HYDE", "HYMN", "IBIS", -"ICON", "IDEA", "IDLE", "IFFY", "INCA", "INCH", "INTO", "IONS", -"IOTA", "IOWA", "IRIS", "IRMA", "IRON", "ISLE", "ITCH", "ITEM", -"IVAN", "JACK", "JADE", "JAIL", "JAKE", "JANE", "JAVA", "JEAN", -"JEFF", "JERK", "JESS", "JEST", "JIBE", "JILL", "JILT", "JIVE", -"JOAN", "JOBS", "JOCK", "JOEL", "JOEY", "JOHN", "JOIN", "JOKE", -"JOLT", "JOVE", "JUDD", "JUDE", "JUDO", "JUDY", "JUJU", "JUKE", -"JULY", "JUNE", "JUNK", "JUNO", "JURY", "JUST", "JUTE", "KAHN", -"KALE", "KANE", "KANT", "KARL", "KATE", "KEEL", "KEEN", "KENO", -"KENT", "KERN", "KERR", "KEYS", "KICK", "KILL", "KIND", "KING", -"KIRK", "KISS", "KITE", "KLAN", "KNEE", "KNEW", "KNIT", "KNOB", -"KNOT", "KNOW", "KOCH", "KONG", "KUDO", "KURD", "KURT", "KYLE", -"LACE", "LACK", "LACY", "LADY", "LAID", "LAIN", "LAIR", "LAKE", -"LAMB", "LAME", "LAND", "LANE", "LANG", "LARD", "LARK", "LASS", -"LAST", "LATE", "LAUD", "LAVA", "LAWN", "LAWS", "LAYS", "LEAD", -"LEAF", "LEAK", "LEAN", "LEAR", "LEEK", "LEER", "LEFT", "LEND", -"LENS", "LENT", "LEON", "LESK", "LESS", "LEST", "LETS", "LIAR", -"LICE", "LICK", "LIED", "LIEN", "LIES", "LIEU", "LIFE", "LIFT", -"LIKE", "LILA", "LILT", "LILY", "LIMA", "LIMB", "LIME", "LIND", -"LINE", "LINK", "LINT", "LION", "LISA", "LIST", "LIVE", "LOAD", -"LOAF", "LOAM", "LOAN", "LOCK", "LOFT", "LOGE", "LOIS", "LOLA", -"LONE", "LONG", "LOOK", "LOON", "LOOT", "LORD", "LORE", "LOSE", -"LOSS", "LOST", "LOUD", "LOVE", "LOWE", "LUCK", "LUCY", "LUGE", -"LUKE", "LULU", "LUND", "LUNG", "LURA", "LURE", "LURK", "LUSH", -"LUST", "LYLE", "LYNN", "LYON", "LYRA", "MACE", "MADE", "MAGI", -"MAID", "MAIL", "MAIN", "MAKE", "MALE", "MALI", "MALL", "MALT", -"MANA", "MANN", "MANY", "MARC", "MARE", "MARK", "MARS", "MART", -"MARY", "MASH", "MASK", "MASS", "MAST", "MATE", "MATH", "MAUL", -"MAYO", "MEAD", "MEAL", "MEAN", "MEAT", "MEEK", "MEET", "MELD", -"MELT", "MEMO", "MEND", "MENU", "MERT", "MESH", "MESS", "MICE", -"MIKE", "MILD", "MILE", "MILK", "MILL", "MILT", "MIMI", "MIND", -"MINE", "MINI", "MINK", "MINT", "MIRE", "MISS", "MIST", "MITE", -"MITT", "MOAN", "MOAT", "MOCK", "MODE", "MOLD", "MOLE", "MOLL", -"MOLT", "MONA", "MONK", "MONT", "MOOD", "MOON", "MOOR", "MOOT", -"MORE", "MORN", "MORT", "MOSS", "MOST", "MOTH", "MOVE", "MUCH", -"MUCK", "MUDD", "MUFF", "MULE", "MULL", "MURK", "MUSH", "MUST", -"MUTE", "MUTT", "MYRA", "MYTH", "NAGY", "NAIL", "NAIR", "NAME", -"NARY", "NASH", "NAVE", "NAVY", "NEAL", "NEAR", "NEAT", "NECK", -"NEED", "NEIL", "NELL", "NEON", "NERO", "NESS", "NEST", "NEWS", -"NEWT", "NIBS", "NICE", "NICK", "NILE", "NINA", "NINE", "NOAH", -"NODE", "NOEL", "NOLL", "NONE", "NOOK", "NOON", "NORM", "NOSE", -"NOTE", "NOUN", "NOVA", "NUDE", "NULL", "NUMB", "OATH", "OBEY", -"OBOE", "ODIN", "OHIO", "OILY", "OINT", "OKAY", "OLAF", "OLDY", -"OLGA", "OLIN", "OMAN", "OMEN", "OMIT", "ONCE", "ONES", "ONLY", -"ONTO", "ONUS", "ORAL", "ORGY", "OSLO", "OTIS", "OTTO", "OUCH", -"OUST", "OUTS", "OVAL", "OVEN", "OVER", "OWLY", "OWNS", "QUAD", -"QUIT", "QUOD", "RACE", "RACK", "RACY", "RAFT", "RAGE", "RAID", -"RAIL", "RAIN", "RAKE", "RANK", "RANT", "RARE", "RASH", "RATE", -"RAVE", "RAYS", "READ", "REAL", "REAM", "REAR", "RECK", "REED", -"REEF", "REEK", "REEL", "REID", "REIN", "RENA", "REND", "RENT", -"REST", "RICE", "RICH", "RICK", "RIDE", "RIFT", "RILL", "RIME", -"RING", "RINK", "RISE", "RISK", "RITE", "ROAD", "ROAM", "ROAR", -"ROBE", "ROCK", "RODE", "ROIL", "ROLL", "ROME", "ROOD", "ROOF", -"ROOK", "ROOM", "ROOT", "ROSA", "ROSE", "ROSS", "ROSY", "ROTH", -"ROUT", "ROVE", "ROWE", "ROWS", "RUBE", "RUBY", "RUDE", "RUDY", -"RUIN", "RULE", "RUNG", "RUNS", "RUNT", "RUSE", "RUSH", "RUSK", -"RUSS", "RUST", "RUTH", "SACK", "SAFE", "SAGE", "SAID", "SAIL", -"SALE", "SALK", "SALT", "SAME", "SAND", "SANE", "SANG", "SANK", -"SARA", "SAUL", "SAVE", "SAYS", "SCAN", "SCAR", "SCAT", "SCOT", -"SEAL", "SEAM", "SEAR", "SEAT", "SEED", "SEEK", "SEEM", "SEEN", -"SEES", "SELF", "SELL", "SEND", "SENT", "SETS", "SEWN", "SHAG", -"SHAM", "SHAW", "SHAY", "SHED", "SHIM", "SHIN", "SHOD", "SHOE", -"SHOT", "SHOW", "SHUN", "SHUT", "SICK", "SIDE", "SIFT", "SIGH", -"SIGN", "SILK", "SILL", "SILO", "SILT", "SINE", "SING", "SINK", -"SIRE", "SITE", "SITS", "SITU", "SKAT", "SKEW", "SKID", "SKIM", -"SKIN", "SKIT", "SLAB", "SLAM", "SLAT", "SLAY", "SLED", "SLEW", -"SLID", "SLIM", "SLIT", "SLOB", "SLOG", "SLOT", "SLOW", "SLUG", -"SLUM", "SLUR", "SMOG", "SMUG", "SNAG", "SNOB", "SNOW", "SNUB", -"SNUG", "SOAK", "SOAR", "SOCK", "SODA", "SOFA", "SOFT", "SOIL", -"SOLD", "SOME", "SONG", "SOON", "SOOT", "SORE", "SORT", "SOUL", -"SOUR", "SOWN", "STAB", "STAG", "STAN", "STAR", "STAY", "STEM", -"STEW", "STIR", "STOW", "STUB", "STUN", "SUCH", "SUDS", "SUIT", -"SULK", "SUMS", "SUNG", "SUNK", "SURE", "SURF", "SWAB", "SWAG", -"SWAM", "SWAN", "SWAT", "SWAY", "SWIM", "SWUM", "TACK", "TACT", -"TAIL", "TAKE", "TALE", "TALK", "TALL", "TANK", "TASK", "TATE", -"TAUT", "TEAL", "TEAM", "TEAR", "TECH", "TEEM", "TEEN", "TEET", -"TELL", "TEND", "TENT", "TERM", "TERN", "TESS", "TEST", "THAN", -"THAT", "THEE", "THEM", "THEN", "THEY", "THIN", "THIS", "THUD", -"THUG", "TICK", "TIDE", "TIDY", "TIED", "TIER", "TILE", "TILL", -"TILT", "TIME", "TINA", "TINE", "TINT", "TINY", "TIRE", "TOAD", -"TOGO", "TOIL", "TOLD", "TOLL", "TONE", "TONG", "TONY", "TOOK", -"TOOL", "TOOT", "TORE", "TORN", "TOTE", "TOUR", "TOUT", "TOWN", -"TRAG", "TRAM", "TRAY", "TREE", "TREK", "TRIG", "TRIM", "TRIO", -"TROD", "TROT", "TROY", "TRUE", "TUBA", "TUBE", "TUCK", "TUFT", -"TUNA", "TUNE", "TUNG", "TURF", "TURN", "TUSK", "TWIG", "TWIN", -"TWIT", "ULAN", "UNIT", "URGE", "USED", "USER", "USES", "UTAH", -"VAIL", "VAIN", "VALE", "VARY", "VASE", "VAST", "VEAL", "VEDA", -"VEIL", "VEIN", "VEND", "VENT", "VERB", "VERY", "VETO", "VICE", -"VIEW", "VINE", "VISE", "VOID", "VOLT", "VOTE", "WACK", "WADE", -"WAGE", "WAIL", "WAIT", "WAKE", "WALE", "WALK", "WALL", "WALT", -"WAND", "WANE", "WANG", "WANT", "WARD", "WARM", "WARN", "WART", -"WASH", "WAST", "WATS", "WATT", "WAVE", "WAVY", "WAYS", "WEAK", -"WEAL", "WEAN", "WEAR", "WEED", "WEEK", "WEIR", "WELD", "WELL", -"WELT", "WENT", "WERE", "WERT", "WEST", "WHAM", "WHAT", "WHEE", -"WHEN", "WHET", "WHOA", "WHOM", "WICK", "WIFE", "WILD", "WILL", -"WIND", "WINE", "WING", "WINK", "WINO", "WIRE", "WISE", "WISH", -"WITH", "WOLF", "WONT", "WOOD", "WOOL", "WORD", "WORE", "WORK", -"WORM", "WORN", "WOVE", "WRIT", "WYNN", "YALE", "YANG", "YANK", -"YARD", "YARN", "YAWL", "YAWN", "YEAH", "YEAR", "YELL", "YOGA", -"YOKE" }; - -const struct e inv_std_dict[2048] = { -{"A", 0}, -{"ABE", 1}, -{"ABED", 571}, -{"ABEL", 572}, -{"ABET", 573}, -{"ABLE", 574}, -{"ABUT", 575}, -{"ACE", 2}, -{"ACHE", 576}, -{"ACID", 577}, -{"ACME", 578}, -{"ACRE", 579}, -{"ACT", 3}, -{"ACTA", 580}, -{"ACTS", 581}, -{"AD", 4}, -{"ADA", 5}, -{"ADAM", 582}, -{"ADD", 6}, -{"ADDS", 583}, -{"ADEN", 584}, -{"AFAR", 585}, -{"AFRO", 586}, -{"AGEE", 587}, -{"AGO", 7}, -{"AHEM", 588}, -{"AHOY", 589}, -{"AID", 8}, -{"AIDA", 590}, -{"AIDE", 591}, -{"AIDS", 592}, -{"AIM", 9}, -{"AIR", 10}, -{"AIRY", 593}, -{"AJAR", 594}, -{"AKIN", 595}, -{"ALAN", 596}, -{"ALEC", 597}, -{"ALGA", 598}, -{"ALIA", 599}, -{"ALL", 11}, -{"ALLY", 600}, -{"ALMA", 601}, -{"ALOE", 602}, -{"ALP", 12}, -{"ALSO", 603}, -{"ALTO", 604}, -{"ALUM", 605}, -{"ALVA", 606}, -{"AM", 13}, -{"AMEN", 607}, -{"AMES", 608}, -{"AMID", 609}, -{"AMMO", 610}, -{"AMOK", 611}, -{"AMOS", 612}, -{"AMRA", 613}, -{"AMY", 14}, -{"AN", 15}, -{"ANA", 16}, -{"AND", 17}, -{"ANDY", 614}, -{"ANEW", 615}, -{"ANN", 18}, -{"ANNA", 616}, -{"ANNE", 617}, -{"ANT", 19}, -{"ANTE", 618}, -{"ANTI", 619}, -{"ANY", 20}, -{"APE", 21}, -{"APS", 22}, -{"APT", 23}, -{"AQUA", 620}, -{"ARAB", 621}, -{"ARC", 24}, -{"ARCH", 622}, -{"ARE", 25}, -{"AREA", 623}, -{"ARGO", 624}, -{"ARID", 625}, -{"ARK", 26}, -{"ARM", 27}, -{"ARMY", 626}, -{"ART", 28}, -{"ARTS", 627}, -{"ARTY", 628}, -{"AS", 29}, -{"ASH", 30}, -{"ASIA", 629}, -{"ASK", 31}, -{"ASKS", 630}, -{"AT", 32}, -{"ATE", 33}, -{"ATOM", 631}, -{"AUG", 34}, -{"AUK", 35}, -{"AUNT", 632}, -{"AURA", 633}, -{"AUTO", 634}, -{"AVE", 36}, -{"AVER", 635}, -{"AVID", 636}, -{"AVIS", 637}, -{"AVON", 638}, -{"AVOW", 639}, -{"AWAY", 640}, -{"AWE", 37}, -{"AWK", 38}, -{"AWL", 39}, -{"AWN", 40}, -{"AWRY", 641}, -{"AX", 41}, -{"AYE", 42}, -{"BABE", 642}, -{"BABY", 643}, -{"BACH", 644}, -{"BACK", 645}, -{"BAD", 43}, -{"BADE", 646}, -{"BAG", 44}, -{"BAH", 45}, -{"BAIL", 647}, -{"BAIT", 648}, -{"BAKE", 649}, -{"BALD", 650}, -{"BALE", 651}, -{"BALI", 652}, -{"BALK", 653}, -{"BALL", 654}, -{"BALM", 655}, -{"BAM", 46}, -{"BAN", 47}, -{"BAND", 656}, -{"BANE", 657}, -{"BANG", 658}, -{"BANK", 659}, -{"BAR", 48}, -{"BARB", 660}, -{"BARD", 661}, -{"BARE", 662}, -{"BARK", 663}, -{"BARN", 664}, -{"BARR", 665}, -{"BASE", 666}, -{"BASH", 667}, -{"BASK", 668}, -{"BASS", 669}, -{"BAT", 49}, -{"BATE", 670}, -{"BATH", 671}, -{"BAWD", 672}, -{"BAWL", 673}, -{"BAY", 50}, -{"BE", 51}, -{"BEAD", 674}, -{"BEAK", 675}, -{"BEAM", 676}, -{"BEAN", 677}, -{"BEAR", 678}, -{"BEAT", 679}, -{"BEAU", 680}, -{"BECK", 681}, -{"BED", 52}, -{"BEE", 53}, -{"BEEF", 682}, -{"BEEN", 683}, -{"BEER", 684}, -{"BEET", 685}, -{"BEG", 54}, -{"BELA", 686}, -{"BELL", 687}, -{"BELT", 688}, -{"BEN", 55}, -{"BEND", 689}, -{"BENT", 690}, -{"BERG", 691}, -{"BERN", 692}, -{"BERT", 693}, -{"BESS", 694}, -{"BEST", 695}, -{"BET", 56}, -{"BETA", 696}, -{"BETH", 697}, -{"BEY", 57}, -{"BHOY", 698}, -{"BIAS", 699}, -{"BIB", 58}, -{"BID", 59}, -{"BIDE", 700}, -{"BIEN", 701}, -{"BIG", 60}, -{"BILE", 702}, -{"BILK", 703}, -{"BILL", 704}, -{"BIN", 61}, -{"BIND", 705}, -{"BING", 706}, -{"BIRD", 707}, -{"BIT", 62}, -{"BITE", 708}, -{"BITS", 709}, -{"BLAB", 710}, -{"BLAT", 711}, -{"BLED", 712}, -{"BLEW", 713}, -{"BLOB", 714}, -{"BLOC", 715}, -{"BLOT", 716}, -{"BLOW", 717}, -{"BLUE", 718}, -{"BLUM", 719}, -{"BLUR", 720}, -{"BOAR", 721}, -{"BOAT", 722}, -{"BOB", 63}, -{"BOCA", 723}, -{"BOCK", 724}, -{"BODE", 725}, -{"BODY", 726}, -{"BOG", 64}, -{"BOGY", 727}, -{"BOHR", 728}, -{"BOIL", 729}, -{"BOLD", 730}, -{"BOLO", 731}, -{"BOLT", 732}, -{"BOMB", 733}, -{"BON", 65}, -{"BONA", 734}, -{"BOND", 735}, -{"BONE", 736}, -{"BONG", 737}, -{"BONN", 738}, -{"BONY", 739}, -{"BOO", 66}, -{"BOOK", 740}, -{"BOOM", 741}, -{"BOON", 742}, -{"BOOT", 743}, -{"BOP", 67}, -{"BORE", 744}, -{"BORG", 745}, -{"BORN", 746}, -{"BOSE", 747}, -{"BOSS", 748}, -{"BOTH", 749}, -{"BOUT", 750}, -{"BOW", 68}, -{"BOWL", 751}, -{"BOY", 69}, -{"BOYD", 752}, -{"BRAD", 753}, -{"BRAE", 754}, -{"BRAG", 755}, -{"BRAN", 756}, -{"BRAY", 757}, -{"BRED", 758}, -{"BREW", 759}, -{"BRIG", 760}, -{"BRIM", 761}, -{"BROW", 762}, -{"BUB", 70}, -{"BUCK", 763}, -{"BUD", 71}, -{"BUDD", 764}, -{"BUFF", 765}, -{"BUG", 72}, -{"BULB", 766}, -{"BULK", 767}, -{"BULL", 768}, -{"BUM", 73}, -{"BUN", 74}, -{"BUNK", 769}, -{"BUNT", 770}, -{"BUOY", 771}, -{"BURG", 772}, -{"BURL", 773}, -{"BURN", 774}, -{"BURR", 775}, -{"BURT", 776}, -{"BURY", 777}, -{"BUS", 75}, -{"BUSH", 778}, -{"BUSS", 779}, -{"BUST", 780}, -{"BUSY", 781}, -{"BUT", 76}, -{"BUY", 77}, -{"BY", 78}, -{"BYE", 79}, -{"BYTE", 782}, -{"CAB", 80}, -{"CADY", 783}, -{"CAFE", 784}, -{"CAGE", 785}, -{"CAIN", 786}, -{"CAKE", 787}, -{"CAL", 81}, -{"CALF", 788}, -{"CALL", 789}, -{"CALM", 790}, -{"CAM", 82}, -{"CAME", 791}, -{"CAN", 83}, -{"CANE", 792}, -{"CANT", 793}, -{"CAP", 84}, -{"CAR", 85}, -{"CARD", 794}, -{"CARE", 795}, -{"CARL", 796}, -{"CARR", 797}, -{"CART", 798}, -{"CASE", 799}, -{"CASH", 800}, -{"CASK", 801}, -{"CAST", 802}, -{"CAT", 86}, -{"CAVE", 803}, -{"CAW", 87}, -{"CEIL", 804}, -{"CELL", 805}, -{"CENT", 806}, -{"CERN", 807}, -{"CHAD", 808}, -{"CHAR", 809}, -{"CHAT", 810}, -{"CHAW", 811}, -{"CHEF", 812}, -{"CHEN", 813}, -{"CHEW", 814}, -{"CHIC", 815}, -{"CHIN", 816}, -{"CHOU", 817}, -{"CHOW", 818}, -{"CHUB", 819}, -{"CHUG", 820}, -{"CHUM", 821}, -{"CITE", 822}, -{"CITY", 823}, -{"CLAD", 824}, -{"CLAM", 825}, -{"CLAN", 826}, -{"CLAW", 827}, -{"CLAY", 828}, -{"CLOD", 829}, -{"CLOG", 830}, -{"CLOT", 831}, -{"CLUB", 832}, -{"CLUE", 833}, -{"COAL", 834}, -{"COAT", 835}, -{"COCA", 836}, -{"COCK", 837}, -{"COCO", 838}, -{"COD", 88}, -{"CODA", 839}, -{"CODE", 840}, -{"CODY", 841}, -{"COED", 842}, -{"COG", 89}, -{"COIL", 843}, -{"COIN", 844}, -{"COKE", 845}, -{"COL", 90}, -{"COLA", 846}, -{"COLD", 847}, -{"COLT", 848}, -{"COMA", 849}, -{"COMB", 850}, -{"COME", 851}, -{"CON", 91}, -{"COO", 92}, -{"COOK", 852}, -{"COOL", 853}, -{"COON", 854}, -{"COOT", 855}, -{"COP", 93}, -{"CORD", 856}, -{"CORE", 857}, -{"CORK", 858}, -{"CORN", 859}, -{"COST", 860}, -{"COT", 94}, -{"COVE", 861}, -{"COW", 95}, -{"COWL", 862}, -{"COY", 96}, -{"CRAB", 863}, -{"CRAG", 864}, -{"CRAM", 865}, -{"CRAY", 866}, -{"CREW", 867}, -{"CRIB", 868}, -{"CROW", 869}, -{"CRUD", 870}, -{"CRY", 97}, -{"CUB", 98}, -{"CUBA", 871}, -{"CUBE", 872}, -{"CUE", 99}, -{"CUFF", 873}, -{"CULL", 874}, -{"CULT", 875}, -{"CUNY", 876}, -{"CUP", 100}, -{"CUR", 101}, -{"CURB", 877}, -{"CURD", 878}, -{"CURE", 879}, -{"CURL", 880}, -{"CURT", 881}, -{"CUT", 102}, -{"CUTS", 882}, -{"DAB", 103}, -{"DAD", 104}, -{"DADE", 883}, -{"DALE", 884}, -{"DAM", 105}, -{"DAME", 885}, -{"DAN", 106}, -{"DANA", 886}, -{"DANE", 887}, -{"DANG", 888}, -{"DANK", 889}, -{"DAR", 107}, -{"DARE", 890}, -{"DARK", 891}, -{"DARN", 892}, -{"DART", 893}, -{"DASH", 894}, -{"DATA", 895}, -{"DATE", 896}, -{"DAVE", 897}, -{"DAVY", 898}, -{"DAWN", 899}, -{"DAY", 108}, -{"DAYS", 900}, -{"DEAD", 901}, -{"DEAF", 902}, -{"DEAL", 903}, -{"DEAN", 904}, -{"DEAR", 905}, -{"DEBT", 906}, -{"DECK", 907}, -{"DEE", 109}, -{"DEED", 908}, -{"DEEM", 909}, -{"DEER", 910}, -{"DEFT", 911}, -{"DEFY", 912}, -{"DEL", 110}, -{"DELL", 913}, -{"DEN", 111}, -{"DENT", 914}, -{"DENY", 915}, -{"DES", 112}, -{"DESK", 916}, -{"DEW", 113}, -{"DIAL", 917}, -{"DICE", 918}, -{"DID", 114}, -{"DIE", 115}, -{"DIED", 919}, -{"DIET", 920}, -{"DIG", 116}, -{"DIME", 921}, -{"DIN", 117}, -{"DINE", 922}, -{"DING", 923}, -{"DINT", 924}, -{"DIP", 118}, -{"DIRE", 925}, -{"DIRT", 926}, -{"DISC", 927}, -{"DISH", 928}, -{"DISK", 929}, -{"DIVE", 930}, -{"DO", 119}, -{"DOCK", 931}, -{"DOE", 120}, -{"DOES", 932}, -{"DOG", 121}, -{"DOLE", 933}, -{"DOLL", 934}, -{"DOLT", 935}, -{"DOME", 936}, -{"DON", 122}, -{"DONE", 937}, -{"DOOM", 938}, -{"DOOR", 939}, -{"DORA", 940}, -{"DOSE", 941}, -{"DOT", 123}, -{"DOTE", 942}, -{"DOUG", 943}, -{"DOUR", 944}, -{"DOVE", 945}, -{"DOW", 124}, -{"DOWN", 946}, -{"DRAB", 947}, -{"DRAG", 948}, -{"DRAM", 949}, -{"DRAW", 950}, -{"DREW", 951}, -{"DRUB", 952}, -{"DRUG", 953}, -{"DRUM", 954}, -{"DRY", 125}, -{"DUAL", 955}, -{"DUB", 126}, -{"DUCK", 956}, -{"DUCT", 957}, -{"DUD", 127}, -{"DUE", 128}, -{"DUEL", 958}, -{"DUET", 959}, -{"DUG", 129}, -{"DUKE", 960}, -{"DULL", 961}, -{"DUMB", 962}, -{"DUN", 130}, -{"DUNE", 963}, -{"DUNK", 964}, -{"DUSK", 965}, -{"DUST", 966}, -{"DUTY", 967}, -{"EACH", 968}, -{"EAR", 131}, -{"EARL", 969}, -{"EARN", 970}, -{"EASE", 971}, -{"EAST", 972}, -{"EASY", 973}, -{"EAT", 132}, -{"EBEN", 974}, -{"ECHO", 975}, -{"ED", 133}, -{"EDDY", 976}, -{"EDEN", 977}, -{"EDGE", 978}, -{"EDGY", 979}, -{"EDIT", 980}, -{"EDNA", 981}, -{"EEL", 134}, -{"EGAN", 982}, -{"EGG", 135}, -{"EGO", 136}, -{"ELAN", 983}, -{"ELBA", 984}, -{"ELI", 137}, -{"ELK", 138}, -{"ELLA", 985}, -{"ELM", 139}, -{"ELSE", 986}, -{"ELY", 140}, -{"EM", 141}, -{"EMIL", 987}, -{"EMIT", 988}, -{"EMMA", 989}, -{"END", 142}, -{"ENDS", 990}, -{"ERIC", 991}, -{"EROS", 992}, -{"EST", 143}, -{"ETC", 144}, -{"EVA", 145}, -{"EVE", 146}, -{"EVEN", 993}, -{"EVER", 994}, -{"EVIL", 995}, -{"EWE", 147}, -{"EYE", 148}, -{"EYED", 996}, -{"FACE", 997}, -{"FACT", 998}, -{"FAD", 149}, -{"FADE", 999}, -{"FAIL", 1000}, -{"FAIN", 1001}, -{"FAIR", 1002}, -{"FAKE", 1003}, -{"FALL", 1004}, -{"FAME", 1005}, -{"FAN", 150}, -{"FANG", 1006}, -{"FAR", 151}, -{"FARM", 1007}, -{"FAST", 1008}, -{"FAT", 152}, -{"FATE", 1009}, -{"FAWN", 1010}, -{"FAY", 153}, -{"FEAR", 1011}, -{"FEAT", 1012}, -{"FED", 154}, -{"FEE", 155}, -{"FEED", 1013}, -{"FEEL", 1014}, -{"FEET", 1015}, -{"FELL", 1016}, -{"FELT", 1017}, -{"FEND", 1018}, -{"FERN", 1019}, -{"FEST", 1020}, -{"FEUD", 1021}, -{"FEW", 156}, -{"FIB", 157}, -{"FIEF", 1022}, -{"FIG", 158}, -{"FIGS", 1023}, -{"FILE", 1024}, -{"FILL", 1025}, -{"FILM", 1026}, -{"FIN", 159}, -{"FIND", 1027}, -{"FINE", 1028}, -{"FINK", 1029}, -{"FIR", 160}, -{"FIRE", 1030}, -{"FIRM", 1031}, -{"FISH", 1032}, -{"FISK", 1033}, -{"FIST", 1034}, -{"FIT", 161}, -{"FITS", 1035}, -{"FIVE", 1036}, -{"FLAG", 1037}, -{"FLAK", 1038}, -{"FLAM", 1039}, -{"FLAT", 1040}, -{"FLAW", 1041}, -{"FLEA", 1042}, -{"FLED", 1043}, -{"FLEW", 1044}, -{"FLIT", 1045}, -{"FLO", 162}, -{"FLOC", 1046}, -{"FLOG", 1047}, -{"FLOW", 1048}, -{"FLUB", 1049}, -{"FLUE", 1050}, -{"FLY", 163}, -{"FOAL", 1051}, -{"FOAM", 1052}, -{"FOE", 164}, -{"FOG", 165}, -{"FOGY", 1053}, -{"FOIL", 1054}, -{"FOLD", 1055}, -{"FOLK", 1056}, -{"FOND", 1057}, -{"FONT", 1058}, -{"FOOD", 1059}, -{"FOOL", 1060}, -{"FOOT", 1061}, -{"FOR", 166}, -{"FORD", 1062}, -{"FORE", 1063}, -{"FORK", 1064}, -{"FORM", 1065}, -{"FORT", 1066}, -{"FOSS", 1067}, -{"FOUL", 1068}, -{"FOUR", 1069}, -{"FOWL", 1070}, -{"FRAU", 1071}, -{"FRAY", 1072}, -{"FRED", 1073}, -{"FREE", 1074}, -{"FRET", 1075}, -{"FREY", 1076}, -{"FROG", 1077}, -{"FROM", 1078}, -{"FRY", 167}, -{"FUEL", 1079}, -{"FULL", 1080}, -{"FUM", 168}, -{"FUME", 1081}, -{"FUN", 169}, -{"FUND", 1082}, -{"FUNK", 1083}, -{"FUR", 170}, -{"FURY", 1084}, -{"FUSE", 1085}, -{"FUSS", 1086}, -{"GAB", 171}, -{"GAD", 172}, -{"GAFF", 1087}, -{"GAG", 173}, -{"GAGE", 1088}, -{"GAIL", 1089}, -{"GAIN", 1090}, -{"GAIT", 1091}, -{"GAL", 174}, -{"GALA", 1092}, -{"GALE", 1093}, -{"GALL", 1094}, -{"GALT", 1095}, -{"GAM", 175}, -{"GAME", 1096}, -{"GANG", 1097}, -{"GAP", 176}, -{"GARB", 1098}, -{"GARY", 1099}, -{"GAS", 177}, -{"GASH", 1100}, -{"GATE", 1101}, -{"GAUL", 1102}, -{"GAUR", 1103}, -{"GAVE", 1104}, -{"GAWK", 1105}, -{"GAY", 178}, -{"GEAR", 1106}, -{"GEE", 179}, -{"GEL", 180}, -{"GELD", 1107}, -{"GEM", 181}, -{"GENE", 1108}, -{"GENT", 1109}, -{"GERM", 1110}, -{"GET", 182}, -{"GETS", 1111}, -{"GIBE", 1112}, -{"GIFT", 1113}, -{"GIG", 183}, -{"GIL", 184}, -{"GILD", 1114}, -{"GILL", 1115}, -{"GILT", 1116}, -{"GIN", 185}, -{"GINA", 1117}, -{"GIRD", 1118}, -{"GIRL", 1119}, -{"GIST", 1120}, -{"GIVE", 1121}, -{"GLAD", 1122}, -{"GLEE", 1123}, -{"GLEN", 1124}, -{"GLIB", 1125}, -{"GLOB", 1126}, -{"GLOM", 1127}, -{"GLOW", 1128}, -{"GLUE", 1129}, -{"GLUM", 1130}, -{"GLUT", 1131}, -{"GO", 186}, -{"GOAD", 1132}, -{"GOAL", 1133}, -{"GOAT", 1134}, -{"GOER", 1135}, -{"GOES", 1136}, -{"GOLD", 1137}, -{"GOLF", 1138}, -{"GONE", 1139}, -{"GONG", 1140}, -{"GOOD", 1141}, -{"GOOF", 1142}, -{"GORE", 1143}, -{"GORY", 1144}, -{"GOSH", 1145}, -{"GOT", 187}, -{"GOUT", 1146}, -{"GOWN", 1147}, -{"GRAB", 1148}, -{"GRAD", 1149}, -{"GRAY", 1150}, -{"GREG", 1151}, -{"GREW", 1152}, -{"GREY", 1153}, -{"GRID", 1154}, -{"GRIM", 1155}, -{"GRIN", 1156}, -{"GRIT", 1157}, -{"GROW", 1158}, -{"GRUB", 1159}, -{"GULF", 1160}, -{"GULL", 1161}, -{"GUM", 188}, -{"GUN", 189}, -{"GUNK", 1162}, -{"GURU", 1163}, -{"GUS", 190}, -{"GUSH", 1164}, -{"GUST", 1165}, -{"GUT", 191}, -{"GUY", 192}, -{"GWEN", 1166}, -{"GWYN", 1167}, -{"GYM", 193}, -{"GYP", 194}, -{"HA", 195}, -{"HAAG", 1168}, -{"HAAS", 1169}, -{"HACK", 1170}, -{"HAD", 196}, -{"HAIL", 1171}, -{"HAIR", 1172}, -{"HAL", 197}, -{"HALE", 1173}, -{"HALF", 1174}, -{"HALL", 1175}, -{"HALO", 1176}, -{"HALT", 1177}, -{"HAM", 198}, -{"HAN", 199}, -{"HAND", 1178}, -{"HANG", 1179}, -{"HANK", 1180}, -{"HANS", 1181}, -{"HAP", 200}, -{"HARD", 1182}, -{"HARK", 1183}, -{"HARM", 1184}, -{"HART", 1185}, -{"HAS", 201}, -{"HASH", 1186}, -{"HAST", 1187}, -{"HAT", 202}, -{"HATE", 1188}, -{"HATH", 1189}, -{"HAUL", 1190}, -{"HAVE", 1191}, -{"HAW", 203}, -{"HAWK", 1192}, -{"HAY", 204}, -{"HAYS", 1193}, -{"HE", 205}, -{"HEAD", 1194}, -{"HEAL", 1195}, -{"HEAR", 1196}, -{"HEAT", 1197}, -{"HEBE", 1198}, -{"HECK", 1199}, -{"HEED", 1200}, -{"HEEL", 1201}, -{"HEFT", 1202}, -{"HELD", 1203}, -{"HELL", 1204}, -{"HELM", 1205}, -{"HEM", 206}, -{"HEN", 207}, -{"HER", 208}, -{"HERB", 1206}, -{"HERD", 1207}, -{"HERE", 1208}, -{"HERO", 1209}, -{"HERS", 1210}, -{"HESS", 1211}, -{"HEW", 209}, -{"HEWN", 1212}, -{"HEY", 210}, -{"HI", 211}, -{"HICK", 1213}, -{"HID", 212}, -{"HIDE", 1214}, -{"HIGH", 1215}, -{"HIKE", 1216}, -{"HILL", 1217}, -{"HILT", 1218}, -{"HIM", 213}, -{"HIND", 1219}, -{"HINT", 1220}, -{"HIP", 214}, -{"HIRE", 1221}, -{"HIS", 215}, -{"HISS", 1222}, -{"HIT", 216}, -{"HIVE", 1223}, -{"HO", 217}, -{"HOB", 218}, -{"HOBO", 1224}, -{"HOC", 219}, -{"HOCK", 1225}, -{"HOE", 220}, -{"HOFF", 1226}, -{"HOG", 221}, -{"HOLD", 1227}, -{"HOLE", 1228}, -{"HOLM", 1229}, -{"HOLT", 1230}, -{"HOME", 1231}, -{"HONE", 1232}, -{"HONK", 1233}, -{"HOOD", 1234}, -{"HOOF", 1235}, -{"HOOK", 1236}, -{"HOOT", 1237}, -{"HOP", 222}, -{"HORN", 1238}, -{"HOSE", 1239}, -{"HOST", 1240}, -{"HOT", 223}, -{"HOUR", 1241}, -{"HOVE", 1242}, -{"HOW", 224}, -{"HOWE", 1243}, -{"HOWL", 1244}, -{"HOYT", 1245}, -{"HUB", 225}, -{"HUCK", 1246}, -{"HUE", 226}, -{"HUED", 1247}, -{"HUFF", 1248}, -{"HUG", 227}, -{"HUGE", 1249}, -{"HUGH", 1250}, -{"HUGO", 1251}, -{"HUH", 228}, -{"HULK", 1252}, -{"HULL", 1253}, -{"HUM", 229}, -{"HUNK", 1254}, -{"HUNT", 1255}, -{"HURD", 1256}, -{"HURL", 1257}, -{"HURT", 1258}, -{"HUSH", 1259}, -{"HUT", 230}, -{"HYDE", 1260}, -{"HYMN", 1261}, -{"I", 231}, -{"IBIS", 1262}, -{"ICON", 1263}, -{"ICY", 232}, -{"IDA", 233}, -{"IDEA", 1264}, -{"IDLE", 1265}, -{"IF", 234}, -{"IFFY", 1266}, -{"IKE", 235}, -{"ILL", 236}, -{"INCA", 1267}, -{"INCH", 1268}, -{"INK", 237}, -{"INN", 238}, -{"INTO", 1269}, -{"IO", 239}, -{"ION", 240}, -{"IONS", 1270}, -{"IOTA", 1271}, -{"IOWA", 1272}, -{"IQ", 241}, -{"IRA", 242}, -{"IRE", 243}, -{"IRIS", 1273}, -{"IRK", 244}, -{"IRMA", 1274}, -{"IRON", 1275}, -{"IS", 245}, -{"ISLE", 1276}, -{"IT", 246}, -{"ITCH", 1277}, -{"ITEM", 1278}, -{"ITS", 247}, -{"IVAN", 1279}, -{"IVY", 248}, -{"JAB", 249}, -{"JACK", 1280}, -{"JADE", 1281}, -{"JAG", 250}, -{"JAIL", 1282}, -{"JAKE", 1283}, -{"JAM", 251}, -{"JAN", 252}, -{"JANE", 1284}, -{"JAR", 253}, -{"JAVA", 1285}, -{"JAW", 254}, -{"JAY", 255}, -{"JEAN", 1286}, -{"JEFF", 1287}, -{"JERK", 1288}, -{"JESS", 1289}, -{"JEST", 1290}, -{"JET", 256}, -{"JIBE", 1291}, -{"JIG", 257}, -{"JILL", 1292}, -{"JILT", 1293}, -{"JIM", 258}, -{"JIVE", 1294}, -{"JO", 259}, -{"JOAN", 1295}, -{"JOB", 260}, -{"JOBS", 1296}, -{"JOCK", 1297}, -{"JOE", 261}, -{"JOEL", 1298}, -{"JOEY", 1299}, -{"JOG", 262}, -{"JOHN", 1300}, -{"JOIN", 1301}, -{"JOKE", 1302}, -{"JOLT", 1303}, -{"JOT", 263}, -{"JOVE", 1304}, -{"JOY", 264}, -{"JUDD", 1305}, -{"JUDE", 1306}, -{"JUDO", 1307}, -{"JUDY", 1308}, -{"JUG", 265}, -{"JUJU", 1309}, -{"JUKE", 1310}, -{"JULY", 1311}, -{"JUNE", 1312}, -{"JUNK", 1313}, -{"JUNO", 1314}, -{"JURY", 1315}, -{"JUST", 1316}, -{"JUT", 266}, -{"JUTE", 1317}, -{"KAHN", 1318}, -{"KALE", 1319}, -{"KANE", 1320}, -{"KANT", 1321}, -{"KARL", 1322}, -{"KATE", 1323}, -{"KAY", 267}, -{"KEEL", 1324}, -{"KEEN", 1325}, -{"KEG", 268}, -{"KEN", 269}, -{"KENO", 1326}, -{"KENT", 1327}, -{"KERN", 1328}, -{"KERR", 1329}, -{"KEY", 270}, -{"KEYS", 1330}, -{"KICK", 1331}, -{"KID", 271}, -{"KILL", 1332}, -{"KIM", 272}, -{"KIN", 273}, -{"KIND", 1333}, -{"KING", 1334}, -{"KIRK", 1335}, -{"KISS", 1336}, -{"KIT", 274}, -{"KITE", 1337}, -{"KLAN", 1338}, -{"KNEE", 1339}, -{"KNEW", 1340}, -{"KNIT", 1341}, -{"KNOB", 1342}, -{"KNOT", 1343}, -{"KNOW", 1344}, -{"KOCH", 1345}, -{"KONG", 1346}, -{"KUDO", 1347}, -{"KURD", 1348}, -{"KURT", 1349}, -{"KYLE", 1350}, -{"LA", 275}, -{"LAB", 276}, -{"LAC", 277}, -{"LACE", 1351}, -{"LACK", 1352}, -{"LACY", 1353}, -{"LAD", 278}, -{"LADY", 1354}, -{"LAG", 279}, -{"LAID", 1355}, -{"LAIN", 1356}, -{"LAIR", 1357}, -{"LAKE", 1358}, -{"LAM", 280}, -{"LAMB", 1359}, -{"LAME", 1360}, -{"LAND", 1361}, -{"LANE", 1362}, -{"LANG", 1363}, -{"LAP", 281}, -{"LARD", 1364}, -{"LARK", 1365}, -{"LASS", 1366}, -{"LAST", 1367}, -{"LATE", 1368}, -{"LAUD", 1369}, -{"LAVA", 1370}, -{"LAW", 282}, -{"LAWN", 1371}, -{"LAWS", 1372}, -{"LAY", 283}, -{"LAYS", 1373}, -{"LEA", 284}, -{"LEAD", 1374}, -{"LEAF", 1375}, -{"LEAK", 1376}, -{"LEAN", 1377}, -{"LEAR", 1378}, -{"LED", 285}, -{"LEE", 286}, -{"LEEK", 1379}, -{"LEER", 1380}, -{"LEFT", 1381}, -{"LEG", 287}, -{"LEN", 288}, -{"LEND", 1382}, -{"LENS", 1383}, -{"LENT", 1384}, -{"LEO", 289}, -{"LEON", 1385}, -{"LESK", 1386}, -{"LESS", 1387}, -{"LEST", 1388}, -{"LET", 290}, -{"LETS", 1389}, -{"LEW", 291}, -{"LIAR", 1390}, -{"LICE", 1391}, -{"LICK", 1392}, -{"LID", 292}, -{"LIE", 293}, -{"LIED", 1393}, -{"LIEN", 1394}, -{"LIES", 1395}, -{"LIEU", 1396}, -{"LIFE", 1397}, -{"LIFT", 1398}, -{"LIKE", 1399}, -{"LILA", 1400}, -{"LILT", 1401}, -{"LILY", 1402}, -{"LIMA", 1403}, -{"LIMB", 1404}, -{"LIME", 1405}, -{"LIN", 294}, -{"LIND", 1406}, -{"LINE", 1407}, -{"LINK", 1408}, -{"LINT", 1409}, -{"LION", 1410}, -{"LIP", 295}, -{"LISA", 1411}, -{"LIST", 1412}, -{"LIT", 296}, -{"LIVE", 1413}, -{"LO", 297}, -{"LOAD", 1414}, -{"LOAF", 1415}, -{"LOAM", 1416}, -{"LOAN", 1417}, -{"LOB", 298}, -{"LOCK", 1418}, -{"LOFT", 1419}, -{"LOG", 299}, -{"LOGE", 1420}, -{"LOIS", 1421}, -{"LOLA", 1422}, -{"LONE", 1423}, -{"LONG", 1424}, -{"LOOK", 1425}, -{"LOON", 1426}, -{"LOOT", 1427}, -{"LOP", 300}, -{"LORD", 1428}, -{"LORE", 1429}, -{"LOS", 301}, -{"LOSE", 1430}, -{"LOSS", 1431}, -{"LOST", 1432}, -{"LOT", 302}, -{"LOU", 303}, -{"LOUD", 1433}, -{"LOVE", 1434}, -{"LOW", 304}, -{"LOWE", 1435}, -{"LOY", 305}, -{"LUCK", 1436}, -{"LUCY", 1437}, -{"LUG", 306}, -{"LUGE", 1438}, -{"LUKE", 1439}, -{"LULU", 1440}, -{"LUND", 1441}, -{"LUNG", 1442}, -{"LURA", 1443}, -{"LURE", 1444}, -{"LURK", 1445}, -{"LUSH", 1446}, -{"LUST", 1447}, -{"LYE", 307}, -{"LYLE", 1448}, -{"LYNN", 1449}, -{"LYON", 1450}, -{"LYRA", 1451}, -{"MA", 308}, -{"MAC", 309}, -{"MACE", 1452}, -{"MAD", 310}, -{"MADE", 1453}, -{"MAE", 311}, -{"MAGI", 1454}, -{"MAID", 1455}, -{"MAIL", 1456}, -{"MAIN", 1457}, -{"MAKE", 1458}, -{"MALE", 1459}, -{"MALI", 1460}, -{"MALL", 1461}, -{"MALT", 1462}, -{"MAN", 312}, -{"MANA", 1463}, -{"MANN", 1464}, -{"MANY", 1465}, -{"MAO", 313}, -{"MAP", 314}, -{"MARC", 1466}, -{"MARE", 1467}, -{"MARK", 1468}, -{"MARS", 1469}, -{"MART", 1470}, -{"MARY", 1471}, -{"MASH", 1472}, -{"MASK", 1473}, -{"MASS", 1474}, -{"MAST", 1475}, -{"MAT", 315}, -{"MATE", 1476}, -{"MATH", 1477}, -{"MAUL", 1478}, -{"MAW", 316}, -{"MAY", 317}, -{"MAYO", 1479}, -{"ME", 318}, -{"MEAD", 1480}, -{"MEAL", 1481}, -{"MEAN", 1482}, -{"MEAT", 1483}, -{"MEEK", 1484}, -{"MEET", 1485}, -{"MEG", 319}, -{"MEL", 320}, -{"MELD", 1486}, -{"MELT", 1487}, -{"MEMO", 1488}, -{"MEN", 321}, -{"MEND", 1489}, -{"MENU", 1490}, -{"MERT", 1491}, -{"MESH", 1492}, -{"MESS", 1493}, -{"MET", 322}, -{"MEW", 323}, -{"MICE", 1494}, -{"MID", 324}, -{"MIKE", 1495}, -{"MILD", 1496}, -{"MILE", 1497}, -{"MILK", 1498}, -{"MILL", 1499}, -{"MILT", 1500}, -{"MIMI", 1501}, -{"MIN", 325}, -{"MIND", 1502}, -{"MINE", 1503}, -{"MINI", 1504}, -{"MINK", 1505}, -{"MINT", 1506}, -{"MIRE", 1507}, -{"MISS", 1508}, -{"MIST", 1509}, -{"MIT", 326}, -{"MITE", 1510}, -{"MITT", 1511}, -{"MOAN", 1512}, -{"MOAT", 1513}, -{"MOB", 327}, -{"MOCK", 1514}, -{"MOD", 328}, -{"MODE", 1515}, -{"MOE", 329}, -{"MOLD", 1516}, -{"MOLE", 1517}, -{"MOLL", 1518}, -{"MOLT", 1519}, -{"MONA", 1520}, -{"MONK", 1521}, -{"MONT", 1522}, -{"MOO", 330}, -{"MOOD", 1523}, -{"MOON", 1524}, -{"MOOR", 1525}, -{"MOOT", 1526}, -{"MOP", 331}, -{"MORE", 1527}, -{"MORN", 1528}, -{"MORT", 1529}, -{"MOS", 332}, -{"MOSS", 1530}, -{"MOST", 1531}, -{"MOT", 333}, -{"MOTH", 1532}, -{"MOVE", 1533}, -{"MOW", 334}, -{"MUCH", 1534}, -{"MUCK", 1535}, -{"MUD", 335}, -{"MUDD", 1536}, -{"MUFF", 1537}, -{"MUG", 336}, -{"MULE", 1538}, -{"MULL", 1539}, -{"MUM", 337}, -{"MURK", 1540}, -{"MUSH", 1541}, -{"MUST", 1542}, -{"MUTE", 1543}, -{"MUTT", 1544}, -{"MY", 338}, -{"MYRA", 1545}, -{"MYTH", 1546}, -{"NAB", 339}, -{"NAG", 340}, -{"NAGY", 1547}, -{"NAIL", 1548}, -{"NAIR", 1549}, -{"NAME", 1550}, -{"NAN", 341}, -{"NAP", 342}, -{"NARY", 1551}, -{"NASH", 1552}, -{"NAT", 343}, -{"NAVE", 1553}, -{"NAVY", 1554}, -{"NAY", 344}, -{"NE", 345}, -{"NEAL", 1555}, -{"NEAR", 1556}, -{"NEAT", 1557}, -{"NECK", 1558}, -{"NED", 346}, -{"NEE", 347}, -{"NEED", 1559}, -{"NEIL", 1560}, -{"NELL", 1561}, -{"NEON", 1562}, -{"NERO", 1563}, -{"NESS", 1564}, -{"NEST", 1565}, -{"NET", 348}, -{"NEW", 349}, -{"NEWS", 1566}, -{"NEWT", 1567}, -{"NIB", 350}, -{"NIBS", 1568}, -{"NICE", 1569}, -{"NICK", 1570}, -{"NIIL", 351}, -{"NILE", 1571}, -{"NINA", 1572}, -{"NINE", 1573}, -{"NIP", 352}, -{"NIT", 353}, -{"NO", 354}, -{"NOAH", 1574}, -{"NOB", 355}, -{"NOD", 356}, -{"NODE", 1575}, -{"NOEL", 1576}, -{"NOLL", 1577}, -{"NON", 357}, -{"NONE", 1578}, -{"NOOK", 1579}, -{"NOON", 1580}, -{"NOR", 358}, -{"NORM", 1581}, -{"NOSE", 1582}, -{"NOT", 359}, -{"NOTE", 1583}, -{"NOUN", 1584}, -{"NOV", 360}, -{"NOVA", 1585}, -{"NOW", 361}, -{"NU", 362}, -{"NUDE", 1586}, -{"NULL", 1587}, -{"NUMB", 1588}, -{"NUN", 363}, -{"NUT", 364}, -{"O", 365}, -{"OAF", 366}, -{"OAK", 367}, -{"OAR", 368}, -{"OAT", 369}, -{"OATH", 1589}, -{"OBEY", 1590}, -{"OBOE", 1591}, -{"ODD", 370}, -{"ODE", 371}, -{"ODIN", 1592}, -{"OF", 372}, -{"OFF", 373}, -{"OFT", 374}, -{"OH", 375}, -{"OHIO", 1593}, -{"OIL", 376}, -{"OILY", 1594}, -{"OINT", 1595}, -{"OK", 377}, -{"OKAY", 1596}, -{"OLAF", 1597}, -{"OLD", 378}, -{"OLDY", 1598}, -{"OLGA", 1599}, -{"OLIN", 1600}, -{"OMAN", 1601}, -{"OMEN", 1602}, -{"OMIT", 1603}, -{"ON", 379}, -{"ONCE", 1604}, -{"ONE", 380}, -{"ONES", 1605}, -{"ONLY", 1606}, -{"ONTO", 1607}, -{"ONUS", 1608}, -{"OR", 381}, -{"ORAL", 1609}, -{"ORB", 382}, -{"ORE", 383}, -{"ORGY", 1610}, -{"ORR", 384}, -{"OS", 385}, -{"OSLO", 1611}, -{"OTIS", 1612}, -{"OTT", 386}, -{"OTTO", 1613}, -{"OUCH", 1614}, -{"OUR", 387}, -{"OUST", 1615}, -{"OUT", 388}, -{"OUTS", 1616}, -{"OVA", 389}, -{"OVAL", 1617}, -{"OVEN", 1618}, -{"OVER", 1619}, -{"OW", 390}, -{"OWE", 391}, -{"OWL", 392}, -{"OWLY", 1620}, -{"OWN", 393}, -{"OWNS", 1621}, -{"OX", 394}, -{"PA", 395}, -{"PAD", 396}, -{"PAL", 397}, -{"PAM", 398}, -{"PAN", 399}, -{"PAP", 400}, -{"PAR", 401}, -{"PAT", 402}, -{"PAW", 403}, -{"PAY", 404}, -{"PEA", 405}, -{"PEG", 406}, -{"PEN", 407}, -{"PEP", 408}, -{"PER", 409}, -{"PET", 410}, -{"PEW", 411}, -{"PHI", 412}, -{"PI", 413}, -{"PIE", 414}, -{"PIN", 415}, -{"PIT", 416}, -{"PLY", 417}, -{"PO", 418}, -{"POD", 419}, -{"POE", 420}, -{"POP", 421}, -{"POT", 422}, -{"POW", 423}, -{"PRO", 424}, -{"PRY", 425}, -{"PUB", 426}, -{"PUG", 427}, -{"PUN", 428}, -{"PUP", 429}, -{"PUT", 430}, -{"QUAD", 1622}, -{"QUIT", 1623}, -{"QUO", 431}, -{"QUOD", 1624}, -{"RACE", 1625}, -{"RACK", 1626}, -{"RACY", 1627}, -{"RAFT", 1628}, -{"RAG", 432}, -{"RAGE", 1629}, -{"RAID", 1630}, -{"RAIL", 1631}, -{"RAIN", 1632}, -{"RAKE", 1633}, -{"RAM", 433}, -{"RAN", 434}, -{"RANK", 1634}, -{"RANT", 1635}, -{"RAP", 435}, -{"RARE", 1636}, -{"RASH", 1637}, -{"RAT", 436}, -{"RATE", 1638}, -{"RAVE", 1639}, -{"RAW", 437}, -{"RAY", 438}, -{"RAYS", 1640}, -{"READ", 1641}, -{"REAL", 1642}, -{"REAM", 1643}, -{"REAR", 1644}, -{"REB", 439}, -{"RECK", 1645}, -{"RED", 440}, -{"REED", 1646}, -{"REEF", 1647}, -{"REEK", 1648}, -{"REEL", 1649}, -{"REID", 1650}, -{"REIN", 1651}, -{"RENA", 1652}, -{"REND", 1653}, -{"RENT", 1654}, -{"REP", 441}, -{"REST", 1655}, -{"RET", 442}, -{"RIB", 443}, -{"RICE", 1656}, -{"RICH", 1657}, -{"RICK", 1658}, -{"RID", 444}, -{"RIDE", 1659}, -{"RIFT", 1660}, -{"RIG", 445}, -{"RILL", 1661}, -{"RIM", 446}, -{"RIME", 1662}, -{"RING", 1663}, -{"RINK", 1664}, -{"RIO", 447}, -{"RIP", 448}, -{"RISE", 1665}, -{"RISK", 1666}, -{"RITE", 1667}, -{"ROAD", 1668}, -{"ROAM", 1669}, -{"ROAR", 1670}, -{"ROB", 449}, -{"ROBE", 1671}, -{"ROCK", 1672}, -{"ROD", 450}, -{"RODE", 1673}, -{"ROE", 451}, -{"ROIL", 1674}, -{"ROLL", 1675}, -{"ROME", 1676}, -{"RON", 452}, -{"ROOD", 1677}, -{"ROOF", 1678}, -{"ROOK", 1679}, -{"ROOM", 1680}, -{"ROOT", 1681}, -{"ROSA", 1682}, -{"ROSE", 1683}, -{"ROSS", 1684}, -{"ROSY", 1685}, -{"ROT", 453}, -{"ROTH", 1686}, -{"ROUT", 1687}, -{"ROVE", 1688}, -{"ROW", 454}, -{"ROWE", 1689}, -{"ROWS", 1690}, -{"ROY", 455}, -{"RUB", 456}, -{"RUBE", 1691}, -{"RUBY", 1692}, -{"RUDE", 1693}, -{"RUDY", 1694}, -{"RUE", 457}, -{"RUG", 458}, -{"RUIN", 1695}, -{"RULE", 1696}, -{"RUM", 459}, -{"RUN", 460}, -{"RUNG", 1697}, -{"RUNS", 1698}, -{"RUNT", 1699}, -{"RUSE", 1700}, -{"RUSH", 1701}, -{"RUSK", 1702}, -{"RUSS", 1703}, -{"RUST", 1704}, -{"RUTH", 1705}, -{"RYE", 461}, -{"SAC", 462}, -{"SACK", 1706}, -{"SAD", 463}, -{"SAFE", 1707}, -{"SAG", 464}, -{"SAGE", 1708}, -{"SAID", 1709}, -{"SAIL", 1710}, -{"SAL", 465}, -{"SALE", 1711}, -{"SALK", 1712}, -{"SALT", 1713}, -{"SAM", 466}, -{"SAME", 1714}, -{"SAN", 467}, -{"SAND", 1715}, -{"SANE", 1716}, -{"SANG", 1717}, -{"SANK", 1718}, -{"SAP", 468}, -{"SARA", 1719}, -{"SAT", 469}, -{"SAUL", 1720}, -{"SAVE", 1721}, -{"SAW", 470}, -{"SAY", 471}, -{"SAYS", 1722}, -{"SCAN", 1723}, -{"SCAR", 1724}, -{"SCAT", 1725}, -{"SCOT", 1726}, -{"SEA", 472}, -{"SEAL", 1727}, -{"SEAM", 1728}, -{"SEAR", 1729}, -{"SEAT", 1730}, -{"SEC", 473}, -{"SEE", 474}, -{"SEED", 1731}, -{"SEEK", 1732}, -{"SEEM", 1733}, -{"SEEN", 1734}, -{"SEES", 1735}, -{"SELF", 1736}, -{"SELL", 1737}, -{"SEN", 475}, -{"SEND", 1738}, -{"SENT", 1739}, -{"SET", 476}, -{"SETS", 1740}, -{"SEW", 477}, -{"SEWN", 1741}, -{"SHAG", 1742}, -{"SHAM", 1743}, -{"SHAW", 1744}, -{"SHAY", 1745}, -{"SHE", 478}, -{"SHED", 1746}, -{"SHIM", 1747}, -{"SHIN", 1748}, -{"SHOD", 1749}, -{"SHOE", 1750}, -{"SHOT", 1751}, -{"SHOW", 1752}, -{"SHUN", 1753}, -{"SHUT", 1754}, -{"SHY", 479}, -{"SICK", 1755}, -{"SIDE", 1756}, -{"SIFT", 1757}, -{"SIGH", 1758}, -{"SIGN", 1759}, -{"SILK", 1760}, -{"SILL", 1761}, -{"SILO", 1762}, -{"SILT", 1763}, -{"SIN", 480}, -{"SINE", 1764}, -{"SING", 1765}, -{"SINK", 1766}, -{"SIP", 481}, -{"SIR", 482}, -{"SIRE", 1767}, -{"SIS", 483}, -{"SIT", 484}, -{"SITE", 1768}, -{"SITS", 1769}, -{"SITU", 1770}, -{"SKAT", 1771}, -{"SKEW", 1772}, -{"SKI", 485}, -{"SKID", 1773}, -{"SKIM", 1774}, -{"SKIN", 1775}, -{"SKIT", 1776}, -{"SKY", 486}, -{"SLAB", 1777}, -{"SLAM", 1778}, -{"SLAT", 1779}, -{"SLAY", 1780}, -{"SLED", 1781}, -{"SLEW", 1782}, -{"SLID", 1783}, -{"SLIM", 1784}, -{"SLIT", 1785}, -{"SLOB", 1786}, -{"SLOG", 1787}, -{"SLOT", 1788}, -{"SLOW", 1789}, -{"SLUG", 1790}, -{"SLUM", 1791}, -{"SLUR", 1792}, -{"SLY", 487}, -{"SMOG", 1793}, -{"SMUG", 1794}, -{"SNAG", 1795}, -{"SNOB", 1796}, -{"SNOW", 1797}, -{"SNUB", 1798}, -{"SNUG", 1799}, -{"SO", 488}, -{"SOAK", 1800}, -{"SOAR", 1801}, -{"SOB", 489}, -{"SOCK", 1802}, -{"SOD", 490}, -{"SODA", 1803}, -{"SOFA", 1804}, -{"SOFT", 1805}, -{"SOIL", 1806}, -{"SOLD", 1807}, -{"SOME", 1808}, -{"SON", 491}, -{"SONG", 1809}, -{"SOON", 1810}, -{"SOOT", 1811}, -{"SOP", 492}, -{"SORE", 1812}, -{"SORT", 1813}, -{"SOUL", 1814}, -{"SOUR", 1815}, -{"SOW", 493}, -{"SOWN", 1816}, -{"SOY", 494}, -{"SPA", 495}, -{"SPY", 496}, -{"STAB", 1817}, -{"STAG", 1818}, -{"STAN", 1819}, -{"STAR", 1820}, -{"STAY", 1821}, -{"STEM", 1822}, -{"STEW", 1823}, -{"STIR", 1824}, -{"STOW", 1825}, -{"STUB", 1826}, -{"STUN", 1827}, -{"SUB", 497}, -{"SUCH", 1828}, -{"SUD", 498}, -{"SUDS", 1829}, -{"SUE", 499}, -{"SUIT", 1830}, -{"SULK", 1831}, -{"SUM", 500}, -{"SUMS", 1832}, -{"SUN", 501}, -{"SUNG", 1833}, -{"SUNK", 1834}, -{"SUP", 502}, -{"SURE", 1835}, -{"SURF", 1836}, -{"SWAB", 1837}, -{"SWAG", 1838}, -{"SWAM", 1839}, -{"SWAN", 1840}, -{"SWAT", 1841}, -{"SWAY", 1842}, -{"SWIM", 1843}, -{"SWUM", 1844}, -{"TAB", 503}, -{"TACK", 1845}, -{"TACT", 1846}, -{"TAD", 504}, -{"TAG", 505}, -{"TAIL", 1847}, -{"TAKE", 1848}, -{"TALE", 1849}, -{"TALK", 1850}, -{"TALL", 1851}, -{"TAN", 506}, -{"TANK", 1852}, -{"TAP", 507}, -{"TAR", 508}, -{"TASK", 1853}, -{"TATE", 1854}, -{"TAUT", 1855}, -{"TEA", 509}, -{"TEAL", 1856}, -{"TEAM", 1857}, -{"TEAR", 1858}, -{"TECH", 1859}, -{"TED", 510}, -{"TEE", 511}, -{"TEEM", 1860}, -{"TEEN", 1861}, -{"TEET", 1862}, -{"TELL", 1863}, -{"TEN", 512}, -{"TEND", 1864}, -{"TENT", 1865}, -{"TERM", 1866}, -{"TERN", 1867}, -{"TESS", 1868}, -{"TEST", 1869}, -{"THAN", 1870}, -{"THAT", 1871}, -{"THE", 513}, -{"THEE", 1872}, -{"THEM", 1873}, -{"THEN", 1874}, -{"THEY", 1875}, -{"THIN", 1876}, -{"THIS", 1877}, -{"THUD", 1878}, -{"THUG", 1879}, -{"THY", 514}, -{"TIC", 515}, -{"TICK", 1880}, -{"TIDE", 1881}, -{"TIDY", 1882}, -{"TIE", 516}, -{"TIED", 1883}, -{"TIER", 1884}, -{"TILE", 1885}, -{"TILL", 1886}, -{"TILT", 1887}, -{"TIM", 517}, -{"TIME", 1888}, -{"TIN", 518}, -{"TINA", 1889}, -{"TINE", 1890}, -{"TINT", 1891}, -{"TINY", 1892}, -{"TIP", 519}, -{"TIRE", 1893}, -{"TO", 520}, -{"TOAD", 1894}, -{"TOE", 521}, -{"TOG", 522}, -{"TOGO", 1895}, -{"TOIL", 1896}, -{"TOLD", 1897}, -{"TOLL", 1898}, -{"TOM", 523}, -{"TON", 524}, -{"TONE", 1899}, -{"TONG", 1900}, -{"TONY", 1901}, -{"TOO", 525}, -{"TOOK", 1902}, -{"TOOL", 1903}, -{"TOOT", 1904}, -{"TOP", 526}, -{"TORE", 1905}, -{"TORN", 1906}, -{"TOTE", 1907}, -{"TOUR", 1908}, -{"TOUT", 1909}, -{"TOW", 527}, -{"TOWN", 1910}, -{"TOY", 528}, -{"TRAG", 1911}, -{"TRAM", 1912}, -{"TRAY", 1913}, -{"TREE", 1914}, -{"TREK", 1915}, -{"TRIG", 1916}, -{"TRIM", 1917}, -{"TRIO", 1918}, -{"TROD", 1919}, -{"TROT", 1920}, -{"TROY", 1921}, -{"TRUE", 1922}, -{"TRY", 529}, -{"TUB", 530}, -{"TUBA", 1923}, -{"TUBE", 1924}, -{"TUCK", 1925}, -{"TUFT", 1926}, -{"TUG", 531}, -{"TUM", 532}, -{"TUN", 533}, -{"TUNA", 1927}, -{"TUNE", 1928}, -{"TUNG", 1929}, -{"TURF", 1930}, -{"TURN", 1931}, -{"TUSK", 1932}, -{"TWIG", 1933}, -{"TWIN", 1934}, -{"TWIT", 1935}, -{"TWO", 534}, -{"ULAN", 1936}, -{"UN", 535}, -{"UNIT", 1937}, -{"UP", 536}, -{"URGE", 1938}, -{"US", 537}, -{"USE", 538}, -{"USED", 1939}, -{"USER", 1940}, -{"USES", 1941}, -{"UTAH", 1942}, -{"VAIL", 1943}, -{"VAIN", 1944}, -{"VALE", 1945}, -{"VAN", 539}, -{"VARY", 1946}, -{"VASE", 1947}, -{"VAST", 1948}, -{"VAT", 540}, -{"VEAL", 1949}, -{"VEDA", 1950}, -{"VEIL", 1951}, -{"VEIN", 1952}, -{"VEND", 1953}, -{"VENT", 1954}, -{"VERB", 1955}, -{"VERY", 1956}, -{"VET", 541}, -{"VETO", 1957}, -{"VICE", 1958}, -{"VIE", 542}, -{"VIEW", 1959}, -{"VINE", 1960}, -{"VISE", 1961}, -{"VOID", 1962}, -{"VOLT", 1963}, -{"VOTE", 1964}, -{"WACK", 1965}, -{"WAD", 543}, -{"WADE", 1966}, -{"WAG", 544}, -{"WAGE", 1967}, -{"WAIL", 1968}, -{"WAIT", 1969}, -{"WAKE", 1970}, -{"WALE", 1971}, -{"WALK", 1972}, -{"WALL", 1973}, -{"WALT", 1974}, -{"WAND", 1975}, -{"WANE", 1976}, -{"WANG", 1977}, -{"WANT", 1978}, -{"WAR", 545}, -{"WARD", 1979}, -{"WARM", 1980}, -{"WARN", 1981}, -{"WART", 1982}, -{"WAS", 546}, -{"WASH", 1983}, -{"WAST", 1984}, -{"WATS", 1985}, -{"WATT", 1986}, -{"WAVE", 1987}, -{"WAVY", 1988}, -{"WAY", 547}, -{"WAYS", 1989}, -{"WE", 548}, -{"WEAK", 1990}, -{"WEAL", 1991}, -{"WEAN", 1992}, -{"WEAR", 1993}, -{"WEB", 549}, -{"WED", 550}, -{"WEE", 551}, -{"WEED", 1994}, -{"WEEK", 1995}, -{"WEIR", 1996}, -{"WELD", 1997}, -{"WELL", 1998}, -{"WELT", 1999}, -{"WENT", 2000}, -{"WERE", 2001}, -{"WERT", 2002}, -{"WEST", 2003}, -{"WET", 552}, -{"WHAM", 2004}, -{"WHAT", 2005}, -{"WHEE", 2006}, -{"WHEN", 2007}, -{"WHET", 2008}, -{"WHO", 553}, -{"WHOA", 2009}, -{"WHOM", 2010}, -{"WHY", 554}, -{"WICK", 2011}, -{"WIFE", 2012}, -{"WILD", 2013}, -{"WILL", 2014}, -{"WIN", 555}, -{"WIND", 2015}, -{"WINE", 2016}, -{"WING", 2017}, -{"WINK", 2018}, -{"WINO", 2019}, -{"WIRE", 2020}, -{"WISE", 2021}, -{"WISH", 2022}, -{"WIT", 556}, -{"WITH", 2023}, -{"WOK", 557}, -{"WOLF", 2024}, -{"WON", 558}, -{"WONT", 2025}, -{"WOO", 559}, -{"WOOD", 2026}, -{"WOOL", 2027}, -{"WORD", 2028}, -{"WORE", 2029}, -{"WORK", 2030}, -{"WORM", 2031}, -{"WORN", 2032}, -{"WOVE", 2033}, -{"WOW", 560}, -{"WRIT", 2034}, -{"WRY", 561}, -{"WU", 562}, -{"WYNN", 2035}, -{"YALE", 2036}, -{"YAM", 563}, -{"YANG", 2037}, -{"YANK", 2038}, -{"YAP", 564}, -{"YARD", 2039}, -{"YARN", 2040}, -{"YAW", 565}, -{"YAWL", 2041}, -{"YAWN", 2042}, -{"YE", 566}, -{"YEA", 567}, -{"YEAH", 2043}, -{"YEAR", 2044}, -{"YELL", 2045}, -{"YES", 568}, -{"YET", 569}, -{"YOGA", 2046}, -{"YOKE", 2047}, -{"YOU", 570} -}; diff --git a/crypto/heimdal/lib/otp/otp_print.c b/crypto/heimdal/lib/otp/otp_print.c deleted file mode 100644 index 701a74c..0000000 --- a/crypto/heimdal/lib/otp/otp_print.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp_print.c,v 1.14 1999/12/02 16:58:45 joda Exp $"); -#endif - -#include "otp_locl.h" - -extern const char *const std_dict[]; - -unsigned -otp_checksum (OtpKey key) -{ - int i; - unsigned sum = 0; - - for (i = 0; i < OTPKEYSIZE; ++i) - sum += ((key[i] >> 0) & 0x03) - + ((key[i] >> 2) & 0x03) - + ((key[i] >> 4) & 0x03) - + ((key[i] >> 6) & 0x03); - sum &= 0x03; - return sum; -} - -void -otp_print_stddict (OtpKey key, char *str, size_t sz) -{ - unsigned sum; - - sum = otp_checksum (key); - snprintf (str, sz, - "%s %s %s %s %s %s", - std_dict[(key[0] << 3) | (key[1] >> 5)], - std_dict[((key[1] & 0x1F) << 6) | (key[2] >> 2)], - std_dict[((key[2] & 0x03) << 9) | (key[3] << 1) | (key[4] >> 7)], - std_dict[((key[4] & 0x7F) << 4) | (key[5] >> 4)], - std_dict[((key[5] & 0x0F) << 7) | (key[6] >> 1)], - std_dict[((key[6] & 0x01) << 10) | (key[7] << 2) | sum]); -} - -void -otp_print_hex (OtpKey key, char *str, size_t sz) -{ - snprintf (str, sz, - "%02x%02x%02x%02x%02x%02x%02x%02x", - key[0], key[1], key[2], key[3], - key[4], key[5], key[6], key[7]); -} - -void -otp_print_hex_extended (OtpKey key, char *str, size_t sz) -{ - strlcpy (str, OTP_HEXPREFIX, sz); - otp_print_hex (key, - str + strlen(OTP_HEXPREFIX), - sz - strlen(OTP_HEXPREFIX)); -} - -void -otp_print_stddict_extended (OtpKey key, char *str, size_t sz) -{ - strlcpy (str, OTP_WORDPREFIX, sz); - otp_print_stddict (key, - str + strlen(OTP_WORDPREFIX), - sz - strlen(OTP_WORDPREFIX)); -} diff --git a/crypto/heimdal/lib/otp/otp_verify.c b/crypto/heimdal/lib/otp/otp_verify.c deleted file mode 100644 index 5fec82e..0000000 --- a/crypto/heimdal/lib/otp/otp_verify.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (c) 1995 - 2000 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otp_verify.c,v 1.7 2000/07/01 13:58:38 assar Exp $"); -#endif - -#include "otp_locl.h" - -int -otp_verify_user_1 (OtpContext *ctx, const char *passwd) -{ - OtpKey key1, key2; - - if (otp_parse (key1, passwd, ctx->alg)) { - ctx->err = "Syntax error in reply"; - return -1; - } - memcpy (key2, key1, sizeof(key1)); - ctx->alg->next (key2); - if (memcmp (ctx->key, key2, sizeof(key2)) == 0) { - --ctx->n; - memcpy (ctx->key, key1, sizeof(key1)); - return 0; - } else - return -1; -} - -int -otp_verify_user (OtpContext *ctx, const char *passwd) -{ - void *dbm; - int ret; - - if (!ctx->challengep) - return -1; - ret = otp_verify_user_1 (ctx, passwd); - dbm = otp_db_open (); - if (dbm == NULL) { - free(ctx->user); - return -1; - } - otp_put (dbm, ctx); - free(ctx->user); - otp_db_close (dbm); - return ret; -} diff --git a/crypto/heimdal/lib/otp/otptest.c b/crypto/heimdal/lib/otp/otptest.c deleted file mode 100644 index 4eb342c..0000000 --- a/crypto/heimdal/lib/otp/otptest.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -RCSID("$Id: otptest.c,v 1.6 1999/12/02 16:58:45 joda Exp $"); -#endif - -#include -#include -#include - -static int -test_one(OtpKey key1, char *name, char *val, - void (*print)(OtpKey,char*, size_t), - OtpAlgorithm *alg) -{ - char buf[256]; - OtpKey key2; - - (*print)(key1, buf, sizeof(buf)); - printf ("%s: %s, ", name, buf); - if (strcmp (buf, val) != 0) { - printf ("failed(*%s* != *%s*)\n", buf, val); - return 1; - } - if (otp_parse (key2, buf, alg)) { - printf ("parse of %s failed\n", name); - return 1; - } - if (memcmp (key1, key2, OTPKEYSIZE) != 0) { - printf ("key1 != key2, "); - } - printf ("success\n"); - return 0; -} - -static int -test (void) -{ - struct test { - char *alg; - char *passphrase; - char *seed; - int count; - char *hex; - char *word; - } tests[] = { - - /* md4 */ - {"md4", "This is a test.", "TeSt", 0, "d1854218ebbb0b51", "ROME MUG FRED SCAN LIVE LACE"}, - {"md4", "This is a test.", "TeSt", 1, "63473ef01cd0b444", "CARD SAD MINI RYE COL KIN"}, - {"md4", "This is a test.", "TeSt", 99, "c5e612776e6c237a", "NOTE OUT IBIS SINK NAVE MODE"}, - {"md4", "AbCdEfGhIjK", "alpha1", 0, "50076f47eb1ade4e", "AWAY SEN ROOK SALT LICE MAP"}, - {"md4", "AbCdEfGhIjK", "alpha1", 1, "65d20d1949b5f7ab", "CHEW GRIM WU HANG BUCK SAID"}, - {"md4", "AbCdEfGhIjK", "alpha1", 99, "d150c82cce6f62d1", "ROIL FREE COG HUNK WAIT COCA"}, - {"md4", "OTP's are good", "correct", 0, "849c79d4f6f55388", "FOOL STEM DONE TOOL BECK NILE"}, - {"md4", "OTP's are good", "correct", 1, "8c0992fb250847b1", "GIST AMOS MOOT AIDS FOOD SEEM"}, - {"md4", "OTP's are good", "correct",99, "3f3bf4b4145fd74b", "TAG SLOW NOV MIN WOOL KENO"}, - - - /* md5 */ - {"md5", "This is a test.", "TeSt", 0, "9e876134d90499dd", "INCH SEA ANNE LONG AHEM TOUR"}, - {"md5", "This is a test.", "TeSt", 1, "7965e05436f5029f", "EASE OIL FUM CURE AWRY AVIS"}, - {"md5", "This is a test.", "TeSt", 99, "50fe1962c4965880", "BAIL TUFT BITS GANG CHEF THY"}, - {"md5", "AbCdEfGhIjK", "alpha1", 0, "87066dd9644bf206", "FULL PEW DOWN ONCE MORT ARC"}, - {"md5", "AbCdEfGhIjK", "alpha1", 1, "7cd34c1040add14b", "FACT HOOF AT FIST SITE KENT"}, - {"md5", "AbCdEfGhIjK", "alpha1", 99, "5aa37a81f212146c", "BODE HOP JAKE STOW JUT RAP"}, - {"md5", "OTP's are good", "correct", 0, "f205753943de4cf9", "ULAN NEW ARMY FUSE SUIT EYED"}, - {"md5", "OTP's are good", "correct", 1, "ddcdac956f234937", "SKIM CULT LOB SLAM POE HOWL"}, - {"md5", "OTP's are good", "correct",99, "b203e28fa525be47", "LONG IVY JULY AJAR BOND LEE"}, - - /* sha */ - {"sha", "This is a test.", "TeSt", 0, "bb9e6ae1979d8ff4", "MILT VARY MAST OK SEES WENT"}, - {"sha", "This is a test.", "TeSt", 1, "63d936639734385b", "CART OTTO HIVE ODE VAT NUT"}, - {"sha", "This is a test.", "TeSt", 99, "87fec7768b73ccf9", "GAFF WAIT SKID GIG SKY EYED"}, - {"sha", "AbCdEfGhIjK", "alpha1", 0, "ad85f658ebe383c9", "LEST OR HEEL SCOT ROB SUIT"}, - {"sha", "AbCdEfGhIjK", "alpha1", 1, "d07ce229b5cf119b", "RITE TAKE GELD COST TUNE RECK"}, - {"sha", "AbCdEfGhIjK", "alpha1", 99, "27bc71035aaf3dc6", "MAY STAR TIN LYON VEDA STAN"}, - {"sha", "OTP's are good", "correct", 0, "d51f3e99bf8e6f0b", "RUST WELT KICK FELL TAIL FRAU"}, - {"sha", "OTP's are good", "correct", 1, "82aeb52d943774e4", "FLIT DOSE ALSO MEW DRUM DEFY"}, - {"sha", "OTP's are good", "correct", 99, "4f296a74fe1567ec", "AURA ALOE HURL WING BERG WAIT"}, - {NULL} - }; - - struct test *t; - int sum = 0; - - for(t = tests; t->alg; ++t) { - int i; - OtpAlgorithm *alg = otp_find_alg (t->alg); - OtpKey key; - - if (alg == NULL) { - printf ("Could not find alg %s\n", t->alg); - return 1; - } - if(alg->init (key, t->passphrase, t->seed)) - return 1; - for (i = 0; i < t->count; ++i) { - if (alg->next (key)) - return 1; - } - sum += test_one (key, "hexadecimal", t->hex, otp_print_hex, - alg) + - test_one (key, "standard_word", t->word, otp_print_stddict, alg); - } - return sum; -} - -int -main (void) -{ - return test (); -} diff --git a/crypto/heimdal/lib/otp/roken_rename.h b/crypto/heimdal/lib/otp/roken_rename.h deleted file mode 100644 index 202b9a6..0000000 --- a/crypto/heimdal/lib/otp/roken_rename.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (c) 1998 Kungliga Tekniska Högskolan - * (Royal Institute of Technology, Stockholm, Sweden). - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the Institute nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* $Id: roken_rename.h,v 1.2 1999/12/02 16:58:45 joda Exp $ */ - -#ifndef __roken_rename_h__ -#define __roken_rename_h__ - -#ifndef HAVE_SNPRINTF -#define snprintf _otp_snprintf -#endif -#ifndef HAVE_ASPRINTF -#define asprintf _otp_asprintf -#endif -#ifndef HAVE_ASNPRINTF -#define asnprintf _otp_asnprintf -#endif -#ifndef HAVE_VASPRINTF -#define vasprintf _otp_vasprintf -#endif -#ifndef HAVE_VASNPRINTF -#define vasnprintf _otp_vasnprintf -#endif -#ifndef HAVE_VSNPRINTF -#define vsnprintf _otp_vsnprintf -#endif -#ifndef HAVE_STRCASECMP -#define strcasecmp _otp_strcasecmp -#endif -#ifndef HAVE_STRNCASECMP -#define strncasecmp _otp_strncasecmp -#endif -#ifndef HAVE_STRLWR -#define strlwr _otp_strlwr -#endif - -#endif /* __roken_rename_h__ */ -- cgit v1.1