From cd7b4ede6c1fadb530fea42340e10b3736256124 Mon Sep 17 00:00:00 2001 From: adrian Date: Sat, 26 May 2012 01:36:25 +0000 Subject: Add the AR9280 workarounds for PCIe suspend/resume. These aren't strictly needed at the moment as we're not doing APSM and forcing the NIC in and out of network sleep. But, they don't hurt. Tested: * AR9280 (mini-PCIe) Obtained from: Qualcomm Atheros, Linux ath9k --- sys/dev/ath/ath_hal/ar9002/ar9280_attach.c | 54 ++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-) diff --git a/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c b/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c index 363e6c0..36205d4 100644 --- a/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c +++ b/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c @@ -420,18 +420,68 @@ bad: static void ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off) { + uint32_t val; + if (AH_PRIVATE(ah)->ah_ispcie && !restore) { ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0); OS_DELAY(1000); + } + + + /* + * Set PCIe workaround bits + * + * NOTE: + * + * In Merlin and Kite, bit 14 in WA register (disable L1) should only + * be set when device enters D3 and be cleared when device comes back + * to D0. + */ + if (power_off) { /* Power-off */ + OS_REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); + + val = OS_REG_READ(ah, AR_WA); + + /* + * Disable bit 6 and 7 before entering D3 to prevent + * system hang. + */ + val &= ~(AR_WA_BIT6 | AR_WA_BIT7); + + /* + * XXX Not sure, is specified in the reference HAL. + */ + val |= AR_WA_BIT22; + + /* + * See above: set AR_WA_D3_L1_DISABLE when entering D3 state. + * + * XXX The reference HAL does it this way - it only sets + * AR_WA_D3_L1_DISABLE if it's set in AR9280_WA_DEFAULT, + * which it (currently) isn't. So the following statement + * is currently a NOP. + */ + if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE) + val |= AR_WA_D3_L1_DISABLE; + + OS_REG_WRITE(ah, AR_WA, val); + } else { /* Power-on */ + val = AR9280_WA_DEFAULT; + + /* + * See note above: make sure L1_DISABLE is not set. + */ + val &= (~AR_WA_D3_L1_DISABLE); + OS_REG_WRITE(ah, AR_WA, val); + + /* set bit 19 to allow forcing of pcie core into L1 state */ OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); - OS_REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT); } } static void ar9280DisablePCIE(struct ath_hal *ah) { - /* XXX TODO */ } static void -- cgit v1.1