summaryrefslogtreecommitdiffstats
path: root/sys/sun4v
Commit message (Collapse)AuthorAgeFilesLines
* Add INCLUDE_CONFIG_FILE in GENERIC on all non-embedded platforms.imp2010-01-101-1/+1
| | | | | | # This is the resolution of removing it from DEFAULTS... MFC after: 5 days
* In sys/<arch>/conf/Makefile set TARGET to <arch>. That allowsbz2010-01-081-0/+2
| | | | | | | | | | | | | | | | sys/conf/makeLINT.mk to only do certain things for certain architectures. Note that neither arm nor mips have the Makefile there, thus essentially not (yet) supporting LINT. This would enable them do add special treatment to sys/conf/makeLINT.mk as well chosing one of the many configurations as LINT. This is a hack of doing this and keeping it in a separate commit will allow us to more easily identify and back it out. Discussed on/with: arch, jhb (as part of the LINT-VIMAGE thread) MFC after: 1 month
* Revert 200594. This file isn't intended for these sorts of things.imp2010-01-041-7/+0
|
* Add vlan(4) to all GENERIC kernels.brooks2010-01-031-0/+1
| | | | MFC after: 1 week
* Hook ebus(4) and isa(4) up to the sun4v LINT build in order tomarius2009-12-231-1/+1
| | | | | ensure that their compilation doesn't break as they are expected to work as-is now (but aren't actually run-time tested).
* - Remove devices which are/were only relevant for sun4u.marius2009-12-231-19/+0
|
* Add INCLUDE_CONFIG_FILE, and a note in comments about how to alsodougb2009-12-161-0/+7
| | | | include the comments with CONFIGARGS
* Add additional checks of the kernel stack addresses in order tomarius2009-12-081-3/+11
| | | | | | ensure we don't overrun the end of the call chain. MFC after: 1 week
* Simplify the invocation of vm_fault(). Specifically, eliminate the flagalc2009-11-271-6/+3
| | | | | | | VM_FAULT_DIRTY. The information provided by this flag can be trivially inferred by vm_fault(). Discussed with: kib
* Extract the code that records syscall results in the frame into MDkib2009-11-102-36/+41
| | | | | | | | | | | function cpu_set_syscall_retval(). Suggested by: marcel Reviewed by: marcel, davidxu PowerPC, ARM, ia64 changes: marcel Sparc64 tested and reviewed by: marius, also sunv reviewed MIPS tested by: gonzo MFC after: 1 month
* In r197963, a race with thread being selected for signal deliverykib2009-10-271-5/+1
| | | | | | | | | | | | | while in kernel mode, and later changing signal mask to block the signal, was fixed for sigprocmask(2) and ptread_exit(3). The same race exists for sigreturn(2), setcontext(2) and swapcontext(2) syscalls. Use kern_sigprocmask() instead of direct manipulation of td_sigmask to reschedule newly blocked signals, closing the race. Reviewed by: davidxu Tested by: pho MFC after: 1 month
* o Introduce vm_sync_icache() for making the I-cache coherent withmarcel2009-10-211-0/+5
| | | | | | | | | | | | | | | | | | | | | the memory or D-cache, depending on the semantics of the platform. vm_sync_icache() is basically a wrapper around pmap_sync_icache(), that translates the vm_map_t argumument to pmap_t. o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc it replaces the pmap_page_executable() function, added to solve the I-cache problem in uiomove_fromphys(). o In proc_rwmem() call vm_sync_icache() when writing to a page that has execute permissions. This assures that when breakpoints are written, the I-cache will be coherent and the process will actually hit the breakpoint. o This also fixes the Book-E PMAP implementation that was missing necessary locking while trying to deal with the I-cache coherency in pmap_enter() (read: mmu_booke_enter_locked). The key property of this change is that the I-cache is made coherent *after* writes have been done. Doing it in the PMAP layer when adding or changing a mapping means that the I-cache is made coherent *before* any writes happen. The difference is key when the I-cache prefetches.
* Change the load base to below 2GB so PIE binaries work including whenmarius2009-10-181-1/+1
| | | | | | | | | compiled to use the Medium/Low code model, which we currently default to for the userland. GNU/Linux has moved their default to Medium/Middle some time ago, which probably explains why the current GNU ld(1) uses a base in the range between 32 and 44 bits instead. Submitted by: kib
* Define architectural load bases for PIE binaries. Addresses were selectedkib2009-10-101-0/+2
| | | | | | | | | | by looking at the bases used for non-relocatable executables by gnu ld(1), and adjusting it slightly. Discussed with: bz Reviewed by: kan Tested by: bz (i386, amd64), bsam (linux) MFC after: some time
* Add a new sysctl for reporting all of the supported page sizes.alc2009-09-181-0/+2
| | | | | Reviewed by: jhb MFC after: 3 weeks
* Get rid of the _NO_NAMESPACE_POLLUTION kludge by creating anphk2009-09-082-20/+49
| | | | | architecture specific include file containing the _ALIGN* stuff which <sys/socket.h> needs.
* * Completely Remove the option STOP_NMI from the kernel. This optionattilio2009-08-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | has proven to have a good effect when entering KDB by using a NMI, but it completely violates all the good rules about interrupts disabled while holding a spinlock in other occasions. This can be the cause of deadlocks on events where a normal IPI_STOP is expected. * Adds an new IPI called IPI_STOP_HARD on all the supported architectures. This IPI is responsible for sending a stop message among CPUs using a privileged channel when disponible. In other cases it just does match a normal IPI_STOP. Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64 architectures, while on the other has a normal IPI_STOP effect. It is responsibility of maintainers to eventually implement an hard stop when necessary and possible. * Use the new IPI facility in order to implement a new userend SMP kernel function called stop_cpus_hard(). That is specular to stop_cpu() but it does use the privileged channel for the stopping facility. * Let KDB use the newly introduced function stop_cpus_hard() and leave stop_cpus() for all the other cases * Disable interrupts on CPU0 when starting the process of APs suspension. * Style cleanup and comments adding This patch should fix the reboot/shutdown deadlocks many users are constantly reporting on mailing lists. Please don't forget to update your config file with the STOP_NMI option removal Reviewed by: jhb Tested by: pho, bz, rink Approved by: re (kib)
* Correct an error of omission in r195649 ("Add support to the virtual memoryalc2009-07-131-2/+1
| | | | | | | | system for configuring machine-dependent memory attributes: ..."). In r195649, the "vm_cache_mode_t/vm_memattr_t" parameter was removed from vm_phys_alloc_contig(). Approved by: re (kensmith)
* Add support to the virtual memory system for configuring machine-alc2009-07-122-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
* Rename option USBVERBOSE to USB_VERBOSE for 2 reasons:marcel2009-07-121-1/+1
| | | | | | | | | | | | 1. USB_VERBOSE is more consistent with USB_DEBUG, 2. sys/dev/usb/usb_device.c uses option USB_VERBOSE and not USBVERBOSE. POLA with the USBVERBOSE option as it's found in 7-STABLE has been considered but found insignificant in the face of the USB stack overhaul. Approved by: re (kensmith)
* Cleanup ALIGNED_POINTER:sam2009-07-051-0/+7
| | | | | | | | | | | o add to platforms where it was missing (arm, i386, powerpc, sparc64, sun4v) o define as "1" on amd64 and i386 where there is no restriction o make the type returned consistent with ALIGN o remove _ALIGNED_POINTER o make associated comments consistent Reviewed by: bde, imp, marcel Approved by: re (kensmith)
* Enable POSIX semaphores on all non-embedded architectures by default.ed2009-07-021-0/+1
| | | | | | | | | More applications (including Firefox) seem to depend on this nowadays, so not having this enabled by default is a bad idea. Proposed by: miwi Patch by: Florian Smeets <flo kasimir com> Approved by: re (kib)
* Correct the #endif comment.alc2009-06-261-1/+1
| | | | | Noticed by: jmallett Approved by: re (kib)
* This change is the next step in implementing the cache control functionalityalc2009-06-262-1/+37
| | | | | | | | | | | required by video card drivers. Specifically, this change introduces vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all architectures. In addition, this changes adds a vm_cache_mode_t parameter to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the interfaces for allocating mapped kernel memory and physical memory, respectively, with non-default cache modes. In collaboration with: jhb
* Remove COMPAT_43 from sun4v's GENERIC.ed2009-06-251-1/+0
| | | | | | | I think it's very unlikely that we have binaries for sun4v that use features provided by COMPAT_43. Remove it from GENERIC. Approved by: kib
* Remove COMPAT_FREEBSD5 from sun4v. There are no FreeBSD/sun4v 5.x binariesjhb2009-06-251-1/+0
| | | | to be compatible with.
* Implement a facility for dynamic per-cpu variables.jeff2009-06-234-0/+11
| | | | | | | | | | | | | | | - Modules and kernel code alike may use DPCPU_DEFINE(), DPCPU_GET(), DPCPU_SET(), etc. akin to the statically defined PCPU_*. Requires only one extra instruction more than PCPU_* and is virtually the same as __thread for builtin and much faster for shared objects. DPCPU variables can be initialized when defined. - Modules are supported by relocating the module's per-cpu linker set over space reserved in the kernel. Modules may fail to load if there is insufficient space available. - Track space available for modules with a one-off extent allocator. Free may block for memory to allocate space for an extent. Reviewed by: jhb, rwatson, kan, sam, grehan, marius, marcel, stas
* Adjust the padding of struct pcpu to r193219.marius2009-06-031-2/+2
| | | | Submitted by: Eygene Ryabinkin
* Remove MAC kernel config files and add "options MAC" to GENERIC, with therwatson2009-06-022-28/+1
| | | | | | | | | | | | | | | goal of shipping 8.0 with MAC support in the default kernel. No policies will be compiled in or enabled by default, but it will now be possible to load them at boot or runtime without a kernel recompile. While the framework is not believed to impose measurable overhead when no policies are loaded (a result of optimization over the past few months in HEAD), we'll continue to benchmark and optimize as the release approaches. Please keep an eye out for performance or functionality regressions that could be a result of this change. Approved by: re (kensmith) Obtained from: TrustedBSD Project
* Place hostnames and similar information fully under the prison system.jamie2009-05-291-1/+0
| | | | | | | | | | | | | | | | | The system hostname is now stored in prison0, and the global variable "hostname" has been removed, as has the hostname_mtx mutex. Jails may have their own host information, or they may inherit it from the parent/system. The proper way to read the hostname is via getcredhostname(), which will copy either the hostname associated with the passed cred, or the system hostname if you pass NULL. The system hostname can still be accessed directly (and without locking) at prison0.pr_host, but that should be avoided where possible. The "similar information" referred to is domainname, hostid, and hostuuid, which have also become prison parameters and had their associated global variables removed. Approved by: bz (mentor)
* Last minute TTY API change: remove mutex argument from tty_alloc().ed2009-05-291-1/+1
| | | | | | | | | | I don't want people to override the mutex when allocating a TTY. It has to be there, to keep drivers like syscons happy. So I'm creating a tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex() should eventually be removed. The advantage of this approach, is that we can just remove a function, without breaking the regular API in the future.
* Add cpu_flush_dcache() for use after non-DMA based I/O so that amarcel2009-05-181-0/+10
| | | | | | | | | | | | | | | | | | | | | possible future I-cache coherency operation can succeed. On ARM for example the L1 cache can be (is) virtually mapped, which means that any I/O that uses temporary mappings will not see the I-cache made coherent. On ia64 a similar behaviour has been observed. By flushing the D-cache, execution of binaries backed by md(4) and/or NFS work reliably. For Book-E (powerpc), execution over NFS exhibits SIGILL once in a while as well, though cpu_flush_dcache() hasn't been implemented yet. Doing an explicit D-cache flush as part of the non-DMA based I/O read operation eliminates the need to do it as part of the I-cache coherency operation itself and as such avoids pessimizing the DMA-based I/O read operations for which D-cache are already flushed/invalidated. It also allows future optimizations whereby the bcopy() followed by the D-cache flush can be integrated in a single operation, which could be implemented using on-chips DMA engines, by-passing the D-cache altogether.
* Don't conditionally define CACHE_LINE_SHIFT, as we anticipate sizingrwatson2009-04-201-3/+1
| | | | | | | | | | | | a fair number of static data structures, making this an unlikely option to try to change without also changing source code. [1] Change default cache line size on ia64, sparc64, and sun4v to 128 bytes, as this was what rtld-elf was already using on those platforms. [2] Suggested by: bde [1], jhb [2] MFC after: 2 weeks
* Add description and cautionary note regarding CACHE_LINE_SIZE.rwatson2009-04-191-0/+4
| | | | | MFC after: 2 weeks Suggested by: alc
* For each architecture, define CACHE_LINE_SHIFT and a derivedrwatson2009-04-191-0/+5
| | | | | | | | | | | | | CACHE_LINE_SIZE constant. These constants are intended to over-estimate the cache line size, and be used at compile-time when a run-time tuning alternative isn't appropriate or available. Defaults for all architectures are 64 bytes, except powerpc where it is 128 bytes (used on G5 systems). MFC after: 2 weeks Discussed on: arch@
* - There's no need to wrap kdb_active and kdb_trap() in #ifdef KDB asmarius2009-03-192-14/+4
| | | | | | | | | they're always available. - Remove unused variable. [1] - Add a missing const. - Sort includes. Submitted by: Christoph Mallon [1]
* Remove the uscanner(4) driver, this follows the removal of the kernel scannerthompsa2009-03-191-1/+0
| | | | | | | driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and contained no logic, the default interface is now libusb (supported by sane). Reviewed by: HPS
* Add AT_EXECPATH ELF auxinfo entry type. The value's a_ptr is a pointerkib2009-03-171-4/+2
| | | | | | | | | | to the full path of the image that is being executed. Increase AT_COUNT. Remove no longer true comment about types used in Linux ELF binaries, listed types contain FreeBSD-specific entries. Reviewed by: kan
* Change over the usb kernel options to the new stack (retaining existingthompsa2009-02-231-58/+5
| | | | naming). The old usb stack can be compiled in my prefixing the name with 'o'.
* Add uslcom to the build too.thompsa2009-02-151-0/+1
| | | | Reminded by: Michael Butler
* Switch over GENERIC kernels to USB2 by default.thompsa2009-02-151-6/+57
| | | | Tested by: make universe
* - Use the generally more appropriate PROM base rather than themarius2009-02-111-1/+1
| | | | | | | | | | | kernel one as the non-faulting flush address in the loader so we can can change KERNBASE and VM_MIN_KERNEL_ADDRESS if we ever want to without needing to worry about using a compatible loader. - Correctly check for LOADER_DEBUG. - Add a missing const for page_sizes[]. This file was missed in r188455.
* Adjust the padding of struct pcpu to r187357.marius2009-01-181-1/+7
|
* Missed the sun4v update to ofw_machdep.h in the OFW modularization commit.nwhitehorn2008-12-201-1/+6
|
* Modularize the Open Firmware client interface to allow run-time switchingnwhitehorn2008-12-204-20/+19
| | | | | | | | | | | | of OFW access semantics, in order to allow future support for real-mode OF access and flattened device frees. OF client interface modules are implemented using KOBJ, in a similar way to the PPC PMAP modules. Because we need Open Firmware to be available before mutexes can be used on sparc64, changes are also included to allow KOBJ to be used very early in the boot process by only using the mutex once we know it has been initialized. Reviewed by: marius, grehan
* Make gpart the default partitioning class on all platforms.marcel2008-12-171-2/+2
| | | | | | | Both ia64 and powerpc were using gpart exclusively already so there's no change for those two. Discussed on: arch@
* AT_DEBUG and AT_BRK were OBE like 10 years ago, so retire them.imp2008-12-171-12/+0
| | | | Reviewed by: peter
* Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,nwhitehorn2008-12-151-53/+0
| | | | | | | | | | | | | | | the code for parsing interrupt maps) to PowerPC and reflect their new MI status by moving them to the shared dev/ofw directory. This commit also modifies the OFW PCI enumeration procedure on PowerPC to allow the bus to find non-firmware-enumerated devices that Apple likes to add, and adds some useful Open Firmware properties (compat and name) to the pnpinfo string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the change to PCI enumeration on PowerPC, X has started working again on PPC machines with Grackle hostbridges. Reviewed by: marius Obtained from: sparc64
* Remove "[KEEP THIS!]" from COMPAT_43TTY. It's not really that important.ed2008-12-021-2/+2
| | | | | | | Sgtty is a programming interface that has been replaced by termios over the years. In June we already removed <sgtty.h>, which exposes the ioctl()'s that are implemented by this interface. The importance of this flag is overrated right now.
* - bump __FreeBSD version to reflect added buf_ring, memory barriers,kmacy2008-11-221-0/+4
| | | | | | | | | | | | | | | | | and ifnet functions - add memory barriers to <machine/atomic.h> - update drivers to only conditionally define their own - add lockless producer / consumer ring buffer - remove ring buffer implementation from cxgb and update its callers - add if_transmit(struct ifnet *ifp, struct mbuf *m) to ifnet to allow drivers to efficiently manage multiple hardware queues (i.e. not serialize all packets through one ifq) - expose if_qflush to allow drivers to flush any driver managed queues This work was supported by Bitgravity Inc. and Chelsio Inc.
OpenPOWER on IntegriCloud