summaryrefslogtreecommitdiffstats
path: root/sys/powerpc
Commit message (Expand)AuthorAgeFilesLines
* Define LDBL_EPSILON, LDBL_MAX and LDBL_MIN as long double constants.marcel2008-11-161-3/+3
* Fix compilation in the case when kernel doesn't have KDB ebabled.sobomax2008-10-301-0/+7
* Fix some possible infinite loops in the ADB code, and remove some hacksnwhitehorn2008-10-302-21/+9
* Add support for little-endian compilations to this file.marcel2008-10-301-1/+15
* DBDMA can transfer a maximum of 64K - 1 bytes per descriptor, as the bytenwhitehorn2008-10-281-0/+6
* Clean up some magic numbers in the DBDMA code by replacing them withnwhitehorn2008-10-272-11/+20
* Add support for kernel profiling for both AIM and BookE.marcel2008-10-273-51/+83
* Remove unused declarations (interrupt_vector_{base|top}).marcel2008-10-271-3/+0
* Declare btext and etext. Needed by sys/kern/subr_prof.c formarcel2008-10-271-0/+3
* Bring Kauai ATA driver in line with Macio ATA by reading the PIO config regnwhitehorn2008-10-271-6/+2
* Add ADB support. This provides support for the external ADB bus on the PowerMacnwhitehorn2008-10-269-0/+1966
* Enable the cfi(4) driver.marcel2008-10-251-0/+1
* Add a driver for the Local Bus Controller.marcel2008-10-252-0/+368
* Assign 0xff800000-0xffffffff to the LBC controller. That's wheremarcel2008-10-251-0/+4
* In mmu_booke_mapdev(), handle mappings that cannot be representedmarcel2008-10-251-5/+16
* Prevent the OF syscons module from trying to attach to real devices on thenwhitehorn2008-10-151-0/+5
* Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. Thisnwhitehorn2008-10-1417-442/+514
* Remove ipi_all() and ipi_self() as the former hasn't been used atmarius2008-09-283-38/+0
* Unbreak support for G4s without an L3 cache. L3 cache support was introducednwhitehorn2008-09-281-6/+5
* Expand the DBDMA API to allow setting device-dependent control bits. Whilenwhitehorn2008-09-272-6/+56
* Add DMA support for Apple built-in ATA controllers.nwhitehorn2008-09-274-34/+795
* Replace all calls to minor() with dev2unit().ed2008-09-271-3/+3
* Change the static struct sysentvec and struct Elf_Brandinfo initializerskib2008-09-241-46/+47
* Allow the cacheline size on PowerPC to be set at runtime. This is essential fornwhitehorn2008-09-244-46/+20
* Improve rev 183168, so that if /chosen/stdout is connected to the serialsobomax2008-09-231-6/+5
* In preparation for PowerPC G5 support, allow PVO objects to contain pagenwhitehorn2008-09-233-54/+62
* Change the DBDMA API to allow DBDMA registers in a subregion of a resource. T...nwhitehorn2008-09-233-9/+12
* Unbreak G3 support. G3 processors don't have an L3 cache, so we shouldn't try...nwhitehorn2008-09-221-3/+8
* When attaching framebuffer to "/chosen/stdout" node fails, try attachingsobomax2008-09-191-2/+10
* o When not making a translation cache-inhibit and guarded (PTE_I|PTE_G)marcel2008-09-161-40/+42
* Rewrite cpudep_ap_bootstrap(). We now enable L3, L2, L1D and L1Imarcel2008-09-161-14/+110
* o In decr_get_timecount() only read the low timebase register.marcel2008-09-161-4/+9
* Set pcpup->pc_curthread and pcpup->pc_curpcb before callingmarcel2008-09-161-3/+3
* o Synchronize the APs timebase and decrementer values with the BSP.marcel2008-09-161-2/+13
* In powerpc_get_pcpup(), make the inline assembly statementmarcel2008-09-161-1/+1
* Remove the tracing from the AP startup. The AP is knownmarcel2008-09-165-91/+12
* o Remove SPR_TSR & SPR_TCR for AIM.marcel2008-09-151-8/+23
* Dont worry about PSL_RI (restartable interrupt indicator) inmarcel2008-09-153-6/+3
* Rename cpu_config_l2cr() to cpu_print_cacheinfo(). We're notmarcel2008-09-151-103/+47
* Remove debugging code.marcel2008-09-141-15/+7
* Trace interrupts with KTR_INTR.marcel2008-08-311-0/+2
* Remove redundant KTR statements.marcel2008-08-311-6/+0
* Trace all PMAP calls using KTR_PMAP.marcel2008-08-311-2/+92
* Remove restore_intr(). We have intr_restore()...marcel2008-08-311-7/+0
* In db_show_mdpcpu(), print MD fields.marcel2008-08-301-0/+4
* Whitespace fixes.marcel2008-08-301-12/+12
* Call powerpc_sync() instead of using an asm statement.marcel2008-08-301-1/+1
* Add powerpc_sync() as an inline function.marcel2008-08-301-0/+7
* Don't clear PSL_RI. Disabling external interruptsmarcel2008-08-301-1/+1
* Move initialization of tlb0, ptbl_bufs and kernel_pdir regions after we areraj2008-08-281-6/+14
OpenPOWER on IntegriCloud