summaryrefslogtreecommitdiffstats
path: root/sys/pci
Commit message (Expand)AuthorAgeFilesLines
* Move all the power management (SMBus) drivers to their own directory,rpaulo2014-09-235-3264/+0
* Move amdsmb and nfsmb from dev/pci to their own device directory.rpaulo2014-09-232-1242/+0
* Move pci/ncr to dev/ncr.rpaulo2014-09-233-7767/+0
* Move rl(4) to dev/rl.glebius2014-09-192-3286/+0
* Fix various NIC drivers to properly cleanup static DMA resources.jhb2014-06-111-4/+3
* Increase the number of TX DMA segments from 32 to 35. It turnedyongari2014-03-311-1/+1
* - Implement the RX EARLYOFF and RXDV GATED bits as done by RealTek's Linuxmarius2014-02-051-0/+6
* Try to make the style used here consistent.marius2014-02-051-12/+3
* Add preliminary support for RTL8168EP.yongari2013-10-291-0/+1
* Add preliminary support for RTL8168G, RTL8168GU and RTL8411B.yongari2013-10-291-0/+3
* The r48589 promised to remove implicit inclusion of if_var.h soon. Prepareglebius2013-10-261-0/+1
* Add preliminary support for RTL8106E PCIe FastEthernet.yongari2013-10-211-0/+1
* Correct MAC revision bits. Previously it always cleared bit 20 andyongari2013-10-211-0/+1
* Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCIscottl2013-08-121-2/+2
* - Corrrect mispellings of word usefulgabor2013-04-171-1/+1
* Fix build.glebius2013-02-211-1/+0
* Most other giant locked storage drivers in the tree don't useimp2013-02-211-5/+0
* Kill now-bogus splhigh() -- it is a nopimp2013-02-211-1/+0
* Mark 'ticks', 'time_second', and 'time_uptime' as volatile to prevent thejhb2013-01-281-1/+1
* Add D-Link DFE-520TX rev C1.yongari2013-01-162-0/+7
* Mechanically substitute flags from historic mbuf allocator withglebius2012-12-051-1/+1
* Remove duplicate const specifiers in many drivers (I hope I got all ofdim2012-11-051-1/+1
* intpm: add ATI IXP400 pci idavg2012-04-161-0/+3
* intpm: return only SMB bus error codes from SMB methodsavg2012-04-081-3/+3
* intpm: reflect the fact that SB800 and later AMD chipsets are not supportedavg2012-04-081-0/+3
* Use correct Config registers for RTL8139 family. Unlike RTL8168 andyongari2012-02-252-14/+37
* To save more power, switch to 10/100Mbps link when controller isyongari2011-11-231-0/+1
* Make sure to stop TX MAC before freeing queued TX frames.yongari2011-11-231-16/+19
* - There's no need to overwrite the default device method with the defaultmarius2011-11-223-13/+4
* Add preliminary support for RTL8168/8111F PCIe Gigabit ethernet.yongari2011-11-171-0/+1
* Add preliminary support for second generation RTL8105E PCIeyongari2011-11-171-0/+1
* Disable PCIe ASPM (Active State Power Management) for allyongari2011-11-161-0/+1
* Add preliminary support for RTL8411 PCIe Gigabit ethernet withyongari2011-11-161-0/+1
* Add preliminary support for RTL8402 PCIe FastEthernet withyongari2011-11-161-0/+1
* - Import the common MII bitbang'ing code from NetBSD and convert drivers tomarius2011-11-012-201/+52
* Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.yongari2011-10-171-1/+1
* Add new device id of D-Link DGE-530T Rev. C controller. DGE-503Tyongari2011-07-301-0/+1
* Do a sweep of the tree replacing calls to pci_find_extcap() with calls tojhb2011-03-231-3/+3
* Add initial support for RTL8401E PCIe Fast Ethernet.yongari2011-02-161-0/+1
* Add support for RTL8105E PCIe Fast Ethernet controller. It seemsyongari2011-01-261-0/+1
* Do not use interrupt taskqueue on controllers with MSI/MSI-Xyongari2011-01-261-0/+10
* Remove TX taskqueue and directly invoke re_start in interrupt task.yongari2011-01-251-1/+0
* Prefer MSI-X to MSI on controllers that support MSI-X. Allyongari2011-01-251-0/+2
* Change model names of controller RTL_HWREV_8168_SPIN[123] to real ones.yongari2011-01-181-3/+3
* Implement initial jumbo frame support for RTL8168/8111 C/D/E PCIeyongari2011-01-171-5/+16
* Add initial support for RTL8168E/8111E-VL PCIe GbE.yongari2011-01-171-0/+1
* Implement TSO on RealTek RTL8168/8111 C or later controllers.yongari2011-01-101-0/+2
* Remove standard PCI configuration space register definitions.yongari2010-11-081-35/+0
* Remove trailing white spaces.yongari2010-11-081-7/+7
* Consistently use tab character instead of using space character.yongari2010-11-081-500/+500
OpenPOWER on IntegriCloud