summaryrefslogtreecommitdiffstats
path: root/sys/pci
Commit message (Expand)AuthorAgeFilesLines
* Close PR 20438. Make fix for preserving LED settings conditional onwpaul2000-08-071-3/+7
* Add the ESS Solo-1 to generic chip match.sanpei2000-08-031-0/+2
* Add support for the Netgear GA620T copper gigabit card.wpaul2000-08-022-1/+8
* Add call to bus_generic_attach() at the end of sk_attach(). It turns out thatwpaul2000-08-021-0/+2
* Grrrr. Add definition for DC_WDOG_CTLWREN. I made this change yesterdaywpaul2000-08-021-0/+1
* Apply patch supplied by John Hood <jhood@sitaranetworks.com> to fix problemswpaul2000-08-011-2/+13
* Part of major rewrite for core version 2.0- clarification ofmjacob2000-08-011-99/+106
* "Fix" cast qualifier warnings using the uintptr_t intermediate trick.peter2000-07-281-3/+6
* Document the 0x12258086 PCI id.asmodai2000-07-271-1/+1
* Use a custom Tigon 2 firmware image, hopefully temporarily. This iswpaul2000-07-261-1683/+1728
* Tweak probe message so that 1000baseSX and 1000baseT cards arewpaul2000-07-201-2/+2
* Update the Tigon driver to support 1000baseTX gigE over copper AceNICwpaul2000-07-204-2427/+3229
* Fix an alpha-only race which causes the transmit side of the chip togallatin2000-07-191-0/+12
* Keep interrupts blocked for all of isp_pci_attach. Redo DMA routinesmjacob2000-07-181-78/+161
* Add the PCI IDs for the Macronix 98727 and 98732 parts. These arewpaul2000-07-172-1/+10
* Apply patch to the dc driver to handle Macronix MX98715AEC-C/D/E chips,wpaul2000-07-152-7/+33
* Close PR# 19904: remember to call sf_setmulti() when initializing thewpaul2000-07-141-0/+5
* sis_miibus_writereg() was checking for SIS_TYPE_900 and phy != 0 twicewpaul2000-07-141-3/+0
* Make all Ethernet drivers attach using ether_ifattach() and detach usingarchie2000-07-1315-84/+40
* Add support for Intel's i810 chipset with integrated graphics. Andfr2000-07-124-4/+518
* Newbusify this driver at an expense of 40 extra lines of code.phk2000-07-101-67/+112
* Thanks for Andrew Gallatin pointing out that freeing contigmalloc'dmjacob2000-07-091-2/+12
* use contigfree() rather than free() to free memory allocated withgallatin2000-07-081-4/+6
* Fix a minor bug in the MAC address unscrambling code.wpaul2000-07-061-3/+3
* Add support for the National Semiconductor DP83815 fast ethernetwpaul2000-07-062-21/+229
* Close PR# 19617: add support for VIA VT6102 NICs to VIA Rhine driver.wpaul2000-07-052-0/+3
* Change startup locking. Use new isp_handle_index functionmjacob2000-07-041-20/+16
* Account for packets we clean out when we disconnect.phk2000-07-031-1/+3
* use warningsalfred2000-06-271-5/+18
* If swdpio1 doesn't clear, we have a reversed (or disconnected) cable. Changemjacob2000-06-251-3/+3
* Added support for SMC9432BTX cards.semenu2000-06-212-10/+81
* Implemented some optimizations which result in 14 fewer instructions in thedg2000-06-191-2/+6
* Added support for the i82559ER (10/100Mbps NIC for embedded applications).dg2000-06-182-9/+16
* Clean up firmware load issues and remove darn near all config options.mjacob2000-06-181-95/+43
* Fix this driver to (finally) work with switches. Some more blackmjacob2000-06-163-26/+163
* Add support for the Accton EN1217.asmodai2000-06-112-0/+14
* Release resources properly in detach.dfr2000-06-101-0/+9
* Fix the AMD 751 AGP minidriver so that it works with my test code.dfr2000-06-104-8/+112
* A driver for programming the AGP hardware. This is only very lightlydfr2000-06-0910-0/+2576
* Nuke the useless chip driver. It gets in the way when you want to loaddfr2000-06-093-50/+4
* When I tweaked if_dc.c to alter the polling interval for non-MIIwpaul2000-06-071-7/+12
* - Call mii_pollstat() after we bring up the link on a 1000baseTX cardwpaul2000-06-061-1/+4
* Rework the support for the internal autonegotiation on the 21143 andwpaul2000-05-312-15/+36
* Encapsulate the old PCI compatability support and APIs completely underpeter2000-05-284-127/+118
* Make this compile without depending on the FreeBSD 2.2 compatabilitypeter2000-05-282-12/+13
* Do not depend on FreeBSD 2.2 compatability defines.peter2000-05-281-1/+1
* Fix some leakage from inside #ifdef PCI_COMPAT (the FreeBSD 2.2 compatpeter2000-05-281-2/+1
* Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/peter2000-05-2810-30/+30
* Use the correct name for the PCI command register (PCIR_COMMAND). Don'tpeter2000-05-281-3/+3
* Use the correct register names. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/peter2000-05-281-3/+3
OpenPOWER on IntegriCloud