summaryrefslogtreecommitdiffstats
path: root/sys/modules
Commit message (Collapse)AuthorAgeFilesLines
* New 1-Wire bus implementation. 1-Wire controller is abstracted, thoughimp2015-08-275-0/+37
| | | | | | | | | | | | | | | | | | only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments)
* Import ioat(4) drivercem2015-08-242-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | I/OAT is also referred to as Crystal Beach DMA and is a Platform Storage Extension (PSE) on some Intel server platforms. This driver currently supports DMA descriptors only and is part of a larger effort to upstream an interconnect between multiple systems using the Non-Transparent Bridge (NTB) PSE. For now, this driver is only built on AMD64 platforms. It may be ported to work on i386 later, if that is desired. The hardware is exclusive to x86. Further documentation on ioat(4), including API documentation and usage, can be found in the new manual page. Bring in a test tool, ioatcontrol(8), in tools/tools/ioat. The test tool is not hooked up to the build and is not intended for end users. Submitted by: jimharris, Carl Delsey <carl.r.delsey@intel.com> Reviewed by: jimharris (reviewed my changes) Approved by: markj (mentor) Relnotes: yes Sponsored by: Intel Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3456
* fix standalone build of zfs moduleavg2015-08-211-1/+1
| | | | Not sure if this is a proper fix, but it does the job.
* Add required foo_if.h files to SRCS to fix build errors.ian2015-08-191-0/+2
| | | | | Pointed out by: gjb Pointy hat to: ian
* Add the GPIO driver for the ADI Engineering RCC-VE and RCC-DFF/DFFv2.loos2015-08-181-0/+8
| | | | | | | | | | | | | This driver allows read the software reset switch state and control the status LEDs. The GPIO pins have their direction (input/output) locked down to prevent possible short circuits. Note that most people get a reset button that is a hardware reset. The software reset button is available on boards from Netgate. Sponsored by: Rubicon Communications (Netgate)
* Fix the build of gpiobus as a module.loos2015-08-171-2/+3
| | | | | | | Add the missing newbus interfaces and gpioc, which is part of basic gpiobus framework. Sponsored by: Rubicon Communications (Netgate)
* Add DEV_RANDOM pseudo-option and use it to "include out" random(4)markm2015-08-174-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if desired. Retire randomdev_none.c and introduce random_infra.c for resident infrastructure. Completely stub out random(4) calls in the "without DEV_RANDOM" case. Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten algorithm. Add a skeleton "other" algorithm framework for folks to add their own processing code. NIST, anyone? Retire the RANDOM_DUMMY option. Build modules for Yarrow, Fortuna and "other". Use atomics for the live entropy rate-tracking. Convert ints to bools for the 'seeded' logic. Move _write() function from the algorithm-specific areas to randomdev.c Get rid of reseed() function - it is unused. Tidy up the opt_*.h includes. Update documentation for random(4) modules. Fix test program (reviewers, please leave this). Differential Revision: https://reviews.freebsd.org/D3354 Reviewed by: wblock,delphij,jmg,bjk Approved by: so (/dev/random blanket)
* Move "ioctl" CAM frontend into separate file.mav2015-08-151-0/+1
| | | | | | It has nothing to share with too huge ctl.c other then device descriptor, but even that may be counted as design error that may be fixed later. At some point we may even want to have several ioctl ports.
* Drop "internal" CTL frontend.mav2015-08-151-1/+0
| | | | | | Its idea was to be a simple initiator and execute several commands from kernel level, but FreeBSD never had consumer for that functionality, while its implementation polluted many unrelated places..
* Add a new PPS driver for AM335x (beaglebone) timer hardware. This can beian2015-08-131-0/+8
| | | | used as a module or compiled-in.
* Build the iwm and iwmfw modules by default on x86.rpaulo2015-08-082-10/+9
|
* iwmfw: fix the path to the firmware file.rpaulo2015-08-081-1/+1
|
* Import OpenBSD's iwm WiFi driver for Intel 3160/7260/7265.rpaulo2015-08-086-0/+58
| | | | | | | | | | | | | | | There are still several bugs, but I've been using it for a while now. Thanks to all the testers and to Adrian for his help with this driver. This driver isn't connected to the build yet, but it will be soon. There's no MFC planned because the driver isn't very stable yet. Reviewed by: adrian Obtained from: https://github.com/rpaulo/iwm Tested by: adrian, gjb, dumbbell (others that I forgot). Relnotes: yes
* cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. Thenp2015-08-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0 release on the website). 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential data path hang by properly programming PMTX congestion threshold settings. - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Fixes a regression where SGE resources can be miss-sized if iWARP is disabled. ETH: - Fixes a timing issue that would prevent CR4 links from coming up with some switches. FOFCoE: - Defers fcoe linkdown mailbox command handling till LOGO is sent. - Updates vlan prio for all outstanding IOs during dcbx update. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Enhances segmentation offload to include VxLAN and Geneve. - Adds PTP support. - Adds new interface to allow the driver to query the VI rss table base addresses. - Allows the driver to program the SGE ingrext contxt CongDrop field. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. iSCSI: - Adds support for iscsi segmentatation offload (ISO). - Adds support for iscsi t10-dif offload. FOiSCSI: - Sets FORCE_BIT for cut through processing for FOiSCSI. FOFCoE: - Adds support for FCoE BB6. - Improves WRITE performance. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption - Fixes an issue where 1000Base-X was not enabled correctly when using QSA modules OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOFCoE: - Fixes fcoe xchg leaks in linkdown/peer down path - Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse - Fixes fw crash by clearing fcf flowc during bye FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ BASE: - Adds support for VFs on PFs 4 to 7 - Adds support for QPs/CQs on any physical and virtual function ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE - Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables) OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software FOISCSI: - Adds IPv6 support for foiscsi. Keeps backward compatibility with old foiscsi drivers which doesn't support ipv6. FOFCoE: - Added fcoe debug support in flowc dump ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Fixes an issue where the link would intermittently fail to come up - Fixes an issue where adapters with an external PHY couldn't run at 100Mbps - Fixes an issue where active optical cables were not recognized - Fixes link advertising issues on T520-BT (speed and pause frames) that would cause the link to negotiate unexpected settings - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested ETH: - Fixes NVGRE Segmentation Offload network header generation. DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------- BASE: - Adds link partner settings reporting when available - Adds QSA support (in conjunction with QSA VPD) - Adds T520-BT LED support - Reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Add support for multiple iSCSI DDP client - Sends DHCP renew request when lease expires ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and register dumps could result in errors. ETH: - Fixes an issue that sometimes prevented the link from coming up in CR adapters. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Adds new interface to allow the driver to query the VI rss table base addresses. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------ BASE: - Adds link partner settings reporting when available - Firmware now reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Adds support for multiple iSCSI DDP clients - Sends DHCP renew request when lease expires ================================================================================ Obtained from: Chelsio Communications MFC after: 2 weeks Sponsored by: Chelsio Communications
* Fix `make depend` in sys/moduleslwhsu2015-08-051-1/+1
| | | | | Reviewed by: delphij Differential Revision: https://reviews.freebsd.org/D3291
* Build if_stf(4) module only when both INET and INET6 support are enabled.ae2015-07-302-2/+7
|
* isl(4), driver for Intersil I2C ISL29018 Digital Ambient Light Sensorgrembo2015-07-252-1/+8
| | | | | | | Differential Revision: https://reviews.freebsd.org/D2811 Reviewed by: adrian, wblock Approved by: adrian, wblock Relnotes: yes
* cyapa(4), driver for the Cypress APA I2C trackpadgrembo2015-07-252-1/+8
| | | | | | | Differential Revision: https://reviews.freebsd.org/D3068 Reviewed by: kib, wblock Approved by: kib Relnotes: yes
* Add Makefiles for CloudABI kernel modules.ed2015-07-223-0/+24
| | | | | | | Place all of the machine/pointer size independent code in a kernel module called 'cloudabi'. All of the 64-bit specific code goes in a separate module called 'cloudabi64'. The latter is only enabled on amd64, as it is the only architecture supported.
* Implement the lockstat provider using SDT(9) instead of the custom providermarkj2015-07-194-22/+0
| | | | | | | | in lockstat.ko. This means that lockstat probes now have typed arguments and will utilize SDT probe hot-patching support when it arrives. Reviewed by: gnn Differential Revision: https://reviews.freebsd.org/D2993
* Merge driver for PMC Sierra's range of SAS/SATA HBAs.benno2015-07-173-0/+66
|\ | | | | | | | | Submitted by: Achim Leubner <Achim.Leubner@pmcs.com> Reviewed by: scottl
| * Enable pms module on amd64 for now.benno2015-07-171-0/+2
| |
| * Driver 'pmspcv' added. Supports PMC-Sierra ↵achim2015-07-072-0/+64
| | | | | | | | PM8001/8081/8088/8089/8074/8076/8077 SAS/SATA HBA Controllers.
* | cxgbe(4): Update T4 and T5 firmwares to 1.14.2.0.np2015-07-142-2/+2
| | | | | | | | | | Obtained from: Chelsio Communications MFC after: 3 days
* | Rename zfs nvpair files to not colidate with our nvlist.oshogbo2015-07-091-3/+3
| | | | | | | | | | PR: 201356 Approved by: pjd (mentor)
* | Add the Banana Pi DTS.loos2015-07-071-0/+1
|/ | | | | The Banana Pi support is in progress and this is intended to help the early adopters.
* improve dependencies for this module a bit... not great, but atjmg2015-07-041-0/+3
| | | | | least gives some basics... I would add them to DPSRC, but due to the intrinsics headers, they can't be added...
* Updated dependssjg2015-07-031-0/+13
|
* Kill MFILES and find things automatically. It turned out to be onlyimp2015-07-0330-74/+0
| | | | | | | | | lightly used. Find the proper .m file when we depend on *_if.[ch] in the srcs line, with seat-belts for false positive matches. This uses make's path mechanism. A further refinement would be to calculate this once, and then pass the resulting _MPATH to modules submakes. Differential Revision: https://reviews.freebsd.org/D2327
* Add an ISA/ACPI bus attachment to proto(4).marcel2015-07-021-1/+4
|
* First cut of DTrace for AArch64.br2015-07-012-2/+3
| | | | | | Reviewed by: andrew, emaste Sponsored by: ARM Limited Differential Revision: https://reviews.freebsd.org/D2738
* - Fix `make depend` in sys/moduleslwhsu2015-06-301-1/+1
| | | | | Differential Revision: https://reviews.freebsd.org/D2951 Approved by: delphij
* Huge cleanup of random(4) code.markm2015-06-303-20/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * GENERAL - Update copyright. - Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set neither to ON, which means we want Fortuna - If there is no 'device random' in the kernel, there will be NO random(4) device in the kernel, and the KERN_ARND sysctl will return nothing. With RANDOM_DUMMY there will be a random(4) that always blocks. - Repair kern.arandom (KERN_ARND sysctl). The old version went through arc4random(9) and was a bit weird. - Adjust arc4random stirring a bit - the existing code looks a little suspect. - Fix the nasty pre- and post-read overloading by providing explictit functions to do these tasks. - Redo read_random(9) so as to duplicate random(4)'s read internals. This makes it a first-class citizen rather than a hack. - Move stuff out of locked regions when it does not need to be there. - Trim RANDOM_DEBUG printfs. Some are excess to requirement, some behind boot verbose. - Use SYSINIT to sequence the startup. - Fix init/deinit sysctl stuff. - Make relevant sysctls also tunables. - Add different harvesting "styles" to allow for different requirements (direct, queue, fast). - Add harvesting of FFS atime events. This needs to be checked for weighing down the FS code. - Add harvesting of slab allocator events. This needs to be checked for weighing down the allocator code. - Fix the random(9) manpage. - Loadable modules are not present for now. These will be re-engineered when the dust settles. - Use macros for locks. - Fix comments. * src/share/man/... - Update the man pages. * src/etc/... - The startup/shutdown work is done in D2924. * src/UPDATING - Add UPDATING announcement. * src/sys/dev/random/build.sh - Add copyright. - Add libz for unit tests. * src/sys/dev/random/dummy.c - Remove; no longer needed. Functionality incorporated into randomdev.*. * live_entropy_sources.c live_entropy_sources.h - Remove; content moved. - move content to randomdev.[ch] and optimise. * src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h - Remove; plugability is no longer used. Compile-time algorithm selection is the way to go. * src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h - Add early (re)boot-time randomness caching. * src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h - Remove; no longer needed. * src/sys/dev/random/uint128.h - Provide a fake uint128_t; if a real one ever arrived, we can use that instead. All that is needed here is N=0, N++, N==0, and some localised trickery is used to manufacture a 128-bit 0ULLL. * src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h - Improve unit tests; previously the testing human needed clairvoyance; now the test will do a basic check of compressibility. Clairvoyant talent is still a good idea. - This is still a long way off a proper unit test. * src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h - Improve messy union to just uint128_t. - Remove unneeded 'static struct fortuna_start_cache'. - Tighten up up arithmetic. - Provide a method to allow eternal junk to be introduced; harden it against blatant by compress/hashing. - Assert that locks are held correctly. - Fix the nasty pre- and post-read overloading by providing explictit functions to do these tasks. - Turn into self-sufficient module (no longer requires randomdev_soft.[ch]) * src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h - Improve messy union to just uint128_t. - Remove unneeded 'staic struct start_cache'. - Tighten up up arithmetic. - Provide a method to allow eternal junk to be introduced; harden it against blatant by compress/hashing. - Assert that locks are held correctly. - Fix the nasty pre- and post-read overloading by providing explictit functions to do these tasks. - Turn into self-sufficient module (no longer requires randomdev_soft.[ch]) - Fix some magic numbers elsewhere used as FAST and SLOW. Differential Revision: https://reviews.freebsd.org/D2025 Reviewed by: vsevolod,delphij,rwatson,trasz,jmg Approved by: so (delphij)
* Several build changes for ix and ixv:erj2015-06-242-3/+5
| | | | | | | | - Allow ix and ixv to be built seperately. - Re-enable building ix for i386 and amd64 archs - Fix ixv Makefile. Approved by: jfv (mentor)
* Updated Copyright informationdavidcs2015-06-231-1/+11
| | | | | | | | | | Added support for the following: - iSCSI TLV (requires 64 Tx and 32 Rx rings - 9K receive buffers for jumbo frames (feature may be enabled/disabled) - builtin firmware, bootloader and minidump template - quick stats - async event handling for SFP insertion/removal and DCBX changes - Configuring DCBX and interrupt coalescing parameters
* Add USB gold driver to default kernel build.hselasky2015-06-191-1/+1
|
* Import ugold driver from OpenBSD supporting digital USB temperaturehselasky2015-06-111-0/+13
| | | | | | | meters. The driver is currently not part of the default kernel build. Obtained from: OpenBSD MFC after: 2 weeks
* Include opt_em.h now that there are actual kernel compile options for em(4).sbruno2015-06-091-1/+2
| | | | | | Submitted by: jfv MFC after: 2 week Sponsored by: Limelight Networks
* Add makefile to build geom_map kld. Document some GEOM_* optionsae2015-06-081-0/+8
| | | | in NOTES and geom(4).
* Turns out amd64 is hit too by ix. When it works, turn it back on.imp2015-06-061-1/+0
|
* ix module doesn't compile on i386, so remove it from the build.imp2015-06-061-1/+1
| | | | It can be restored when it builds again.
* Add proto_busdma.c to the module.marcel2015-06-061-0/+1
|
* Update SW4 to the Intel ixl/ixlv drivers. This is primarily a sharedjfv2015-06-052-2/+2
| | | | | | | | | code update, with supporting changes in the CORE. Changes for the extended media types, VF driver has virtual channel protocol changes, and some register use corrections. This software change should be coordinated with Firmware updates to your hardware, contact your support channels for that. MFC after: 1 week
* Change EM_MULTIQUEUE to a real kernconf entry and enable support forsbruno2015-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | up to 2 rx/tx queues for the 82574. Program the 82574 to enable 5 msix vectors, assign 1 to each rx queue, 1 to each tx queue and 1 to the link handler. Inspired by DragonFlyBSD, enable some RSS logic for handling tx queue handling/processing. Move multiqueue handler functions so that they line up better in a diff review to if_igb.c Always enqueue tx work to be done in em_mq_start, if unable to acquire the TX lock, then this will be processed in the background later by the taskqueue. Remove mbuf argument from em_start_mq_locked() as the work is always enqueued. (stolen from igb) Setup TARC, TXDCTL and RXDCTL registers for better performance and stability in multiqueue and singlequeue implementations. Handle Intel errata 3 and generic multiqueue behavior with the initialization of TARC(0) and TARC(1) Bind interrupt threads to cpus in order. (stolen from igb) Add 2 new DDB functions, one to display the queue(s) and their settings and one to reset the adapter. Primarily used for debugging. In the multiqueue configuration, bump RXD and TXD ring size to max for the adapter (4096). Setup an RDTR of 64 and an RADV of 128 in multiqueue configuration to cut down on the number of interrupts. RADV was arbitrarily set to 2x RDTR and can be adjusted as needed. Cleanup the display in top a bit to make it clearer where the taskqueue threads are running and what they should be doing. Ensure that both queues are processed by em_local_timer() by writing them both to the IMS register to generate soft interrupts. Ensure that an soft interrupt is generated when em_msix_link() is run so that any races between assertion of the link/status interrupt and a rx/tx interrupt are handled. Document existing tuneables: hw.em.eee_setting, hw.em.msix, hw.em.smart_pwr_down, hw.em.sbp Document use of hw.em.num_queues and the new kernel option EM_MULTIQUEUE Thanks to Intel for their continued support of FreeBSD. Reviewed by: erj jfv hiren gnn wblock Obtained from: Intel Corporation MFC after: 2 weeks Relnotes: Yes Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D1994
* Delta D2489 - Add SRIOV support to the Intel 10G driver.jfv2015-06-011-3/+2
| | | | | | | NOTE: This is a technology preview, while it has undergone development testing, Intel has not yet completed full validation of the feature. It is being integrated for early access and customer testing.
* Revert last commit, to remove added skeleton tree.jfv2015-06-011-2/+3
|
* Delta D2489 - Add SRIOV support to the Intel 10G driver.jfv2015-06-011-3/+2
| | | | | | NOTE: This is a technology preview, while it has undergone development tests, Intel has not yet completed full validation of the feature. It is being integrated for early access and customer testing.
* Add USB MIDI template for USB device side mode.hselasky2015-06-011-1/+2
|
* ig4 - Intel fourth gen integrated I2C SMBus driver.grembo2015-05-302-1/+9
| | | | | | | Differential Revision: https://reviews.freebsd.org/D2372 Reviewed by: jhb, wblock, adrian Approved by: jhb, wblock Relnotes: yes
* The linux_common module only for 64bit Linuxulators.dchagin2015-05-291-1/+1
| | | | Its my fault.
OpenPOWER on IntegriCloud