summaryrefslogtreecommitdiffstats
path: root/sys/modules/Makefile
Commit message (Expand)AuthorAgeFilesLines
* Hook-up the uart(4) driver to the build. For a detailed descriptionmarcel2003-09-061-1/+2
* Add pst as a modulesos2003-08-301-0/+1
* Hook up mac_stub to the modules Makefile.rwatson2003-08-211-0/+1
* Re-enable pcfclock in the build.obrien2003-08-101-0/+1
* Initiate de-orbit burn for fpu-less operation. 386+387 is stillpeter2003-07-221-3/+1
* hook safe driver to the buildsam2003-07-211-0/+1
* This is a pseudo physical interface for the HARP ATM stack. When loadedharti2003-07-211-0/+1
* This is a driver for IDT77252 based ATM interfaces. It has been testedharti2003-07-151-0/+1
* Add a facility for devices, specifically network interfaces, that requireharti2003-07-151-0/+1
* Attach the amd(4) module to the i386 and pc98 builds only;ru2003-06-281-0/+1
* hookup ath and ath_hal to the buildsam2003-06-281-0/+2
* Hook umct up to the module tree.scottl2003-06-281-0/+1
* Attach the "null" module to the LINT build.ru2003-06-261-0/+1
* The ext2fs module needs a machine-dependent bitops.h file, so onlyiedowse2003-06-241-0/+2
* Include the ufs module if ALL_MODULES is defined so that it getsiedowse2003-06-231-4/+10
* Hook up scd(4) to the build.mdodd2003-06-231-0/+1
* This is a driver for Fore PCA200E cards that uses busdma and works onharti2003-06-231-0/+1
* This is a driver for Fore/Marconi HE155 and HE622 ATM cards. It is fullharti2003-06-171-0/+1
* Fix the breakage introduced by rev. 1.43 of sys/dev/midway.c (don't commitharti2003-06-161-0/+1
* The en module has been broken for the last 40 hours. Disconnect itimp2003-06-151-1/+0
* Add i2c to the list of modules to build.nsouch2003-06-141-0/+1
* This is a driver for the physical layer chips used in ATM interfaces.harti2003-06-121-0/+1
* remove old CCD modulephk2003-06-091-1/+0
* Add GEOM module compilation shims.phk2003-05-311-0/+1
* Move the ips driver from ${MACHINE_ARCH} == "i386" to ${MACHINE} == "i386".nyan2003-05-131-1/+1
* Hook up the ips modulescottl2003-05-111-0/+1
* Add RealTek RTL8150 USB to fast Ethernet controller driver.akiyama2003-05-031-0/+1
* Convert the midway driver to use busdma. Except for this conversion theharti2003-04-251-0/+1
* Add device driver support for the ASIX Electronics AX88172 USB 2.0wpaul2003-04-201-0/+1
* Driver for Granch SBNI16 SHDSL modemfjoe2003-04-131-0/+1
* The dpt, ex and idt modules are for i386 only.nyan2003-04-131-3/+3
* Add 'idt' driver to module build.mdodd2003-03-291-0/+1
* Add module infrastructure for 'dpt' driver.mdodd2003-03-291-0/+1
* Add module infrastructure for 'if_ex'.mdodd2003-03-291-0/+1
* Add module infrastructure for 'vpd' and 'smbios' and move 'smbios'mdodd2003-03-291-1/+1
* Add module infrastructure for elink.mdodd2003-03-291-0/+1
* Add module infrastructure for if_ie.mdodd2003-03-291-0/+1
* Retire 'atspeaker' and 'pcspeaker'. We'll use 'speaker' whichmdodd2003-03-291-2/+1
* Simplify the assignment statement.ru2003-03-121-1/+1
* Build the drm module also on pc98.nyan2003-03-091-1/+1
* A cute yet small MAC policy that provides a simple ACL mechanism torwatson2003-03-021-0/+1
* Hook up the if_my module to the build.ru2003-02-271-0/+1
* Build the ncp and nwfs modules again, but only on i386 for now.tjr2003-02-271-4/+2
* Split the arch-specific AGP files into the appropriate files.* and do the sameanholt2003-02-141-1/+2
* We only provide agp drivers for the intel chipsets, move the agppeter2003-02-131-1/+1
* Add CanBe power management controller support.nyan2003-02-031-1/+3
* Run kldxref on sparc64, it works now.jake2003-01-211-1/+1
* A driver for the System Management Application Programmdodd2003-01-171-0/+1
* hookup wlan and rcv4 modules to the buildsam2003-01-151-0/+2
* Build gem(4) on powerpc also.obrien2003-01-091-2/+5
OpenPOWER on IntegriCloud