summaryrefslogtreecommitdiffstats
path: root/sys/mips
Commit message (Expand)AuthorAgeFilesLines
* Netlogic XLP network driver updatejchandra2013-09-0710-301/+222
* Use a better version of memcpy/bcopy for mips kernel.jchandra2013-09-072-92/+286
* MFCmarkm2013-09-073-3/+14
|\
| * Remove the hardcoded limit for the number of gpio_pins that can be used.loos2013-09-062-2/+10
| * Fix an off-by-one bug in ar71xx_gpio and bcm2835_gpio which makes the lastloos2013-09-061-1/+1
| * Fix build with gcc. Move sf_buf_alloc()/sf_buf_free() declarationsglebius2013-09-061-0/+3
* | Yarrow wants entropy estimations to be conservative; the usual ideamarkm2013-09-061-1/+1
|/
* Fix the leakage of dma tags on if_arge. The leak occur when arge_start()loos2013-09-061-0/+26
* On those machines, where sf_bufs do not represent any real object, makeglebius2013-09-062-7/+15
* Add 32-bit support for Gxemul's oldtestmips machine emulationgonzo2013-09-042-0/+68
* Add options GEOM_PART_GPT and options MSDOSFS to the DIR-825sbruno2013-09-031-0/+3
* Newer versions of gcc define __INT64_C and __UINT64_C, so avoidimp2013-09-031-0/+2
* pmap_protect() on MIPS does not need to acquire the pvh global lock.alc2013-09-011-2/+0
* Implement pmap_advise().alc2013-08-311-1/+82
* - Set proper KERNLOADADDRgonzo2013-08-311-0/+3
* YAMON is 32-bit application and uses 32-bit pointers to pass kernelgonzo2013-08-311-4/+9
* Add device PicoStation M2HP support.hiren2013-08-302-0/+171
* Add bpf(4) to config file to get dhclient workinggonzo2013-08-301-0/+1
* Add PCI bus space implementation that converts all 2 and 4 bytesgonzo2013-08-304-4/+448
* Significantly reduce the cost, i.e., run time, of calls to madvise(...,alc2013-08-291-0/+8
* Prevent the full restart cycle every time arge_start() is called. Onlyloos2013-08-291-1/+2
* Make ar71xx_spi attach the next free unit of spibus and not only spibus0.loos2013-08-281-1/+1
* Add the default hints to make the GPIO pins, rf led and reset switch workloos2013-08-281-0/+18
* Fix GT PCI controller driver on big-endian hardwaregonzo2013-08-281-18/+35
* Fixes for compatibility with QEMU:gonzo2013-08-271-2/+8
* - Initialize freq variable so we will not end up with random valuegonzo2013-08-271-0/+1
* Some vendors store the mac addresses of arge(4) as a literal sring in thesbruno2013-08-232-7/+21
* Revert r254501. Instead, reuse the type stability of the struct pmapkib2013-08-221-3/+0
* Add a missing break.adrian2013-08-121-0/+1
* The soft and hard busy mechanism rely on the vm object lock to work.attilio2013-08-091-12/+10
* Replace kernel virtual address space allocation with vmem. This providesjeff2013-08-074-20/+6
* Back out r253779 & r253786.obrien2013-07-3114-18/+6
* Adjust magic numbers to allow attachment of ath(4) modules.sbruno2013-07-311-2/+2
* device if_bridge gets me a bridge devicesbruno2013-07-311-1/+1
* Decouple yarrow from random(4) device.obrien2013-07-2914-6/+18
* Revert r253748,253749avg2013-07-281-3/+2
* put contents of cpu.h under _KERNELavg2013-07-281-2/+3
* This file isn't derived from anything delivered by Berkeley, so removeimp2013-07-221-4/+0
* Add some initial board support for the AR934x and the Qualcomm Atherosadrian2013-07-214-0/+234
* Implement some initial AR934x support routines.adrian2013-07-214-0/+394
* Teach the GPIO code about the AR934x GPIO register and pin counts.adrian2013-07-211-2/+17
* Use the UART frequency when programming the UART clock.adrian2013-07-214-4/+4
* Initialise the watchdog and UART frequencies.adrian2013-07-214-0/+12
* Add two new CPU specific definitions - the watchdog clock frequency andadrian2013-07-211-1/+5
* Include sys/systm.h after sys/param.h.ae2013-07-151-1/+1
* Introduce new structure sfstat for collecting sendfile's statisticsae2013-07-151-1/+1
* Nearly a complete rewrite of elf.h.imp2013-07-091-187/+182
* Import the initial SoC register definitions for the AR934x MIPS74k SoC.adrian2013-07-081-0/+156
* Add AR9341, AR9342, AR9344 SoC types.adrian2013-07-081-0/+3
* Remove all the NOPs after SYNC. They aren't needed.imp2013-07-071-10/+6
OpenPOWER on IntegriCloud