summaryrefslogtreecommitdiffstats
path: root/sys/i386/pci
Commit message (Expand)AuthorAgeFilesLines
* More properly handle links who only have 1 valid IRQ in their bitmask. Thejhb2007-12-211-13/+12
* MFamd64: 1.109 of pci_cfgreg.c which changes pci_cfgdisable() into a nopjhb2007-11-281-2/+6
* Adjust the code to probe for the PCI config mechanism to use.jhb2007-11-281-25/+25
* Make the PCI code aware of PCI domains (aka PCI segments) so we canmarius2007-09-301-0/+5
* Revamp the MSI/MSI-X code a bit to achieve two main goals:jhb2007-05-021-5/+15
* Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support.jhb2007-01-221-0/+2
* Give Host-PCI bridge drivers their own pcib_alloc_msi() andjhb2006-12-121-2/+24
* Replace a few magic numbers.jhb2006-12-121-2/+2
* MD support for PCI Message Signalled Interrupts on amd64 and i386:jhb2006-11-131-0/+8
* Don't dump the $PIR table under bootverbose. The pirtool program injhb2006-11-091-39/+0
* - Make pcib_devclass private to sys/dev/pci/pci_pci.c and change all thejhb2006-01-061-17/+7
* Move the hostb driver out of the i386 and amd64 PCI code (where it wasjhb2005-12-201-58/+0
* Add support for 7320 and 915 PCIe chipsets.rodrigc2005-12-081-7/+11
* Provide a dummy NO_XBOX option that lives in opt_xbox.h for pc98.imp2005-11-141-2/+0
* Fix pc98 build.nyan2005-11-091-0/+2
* Add support for XBOX to the FreeBSD port. The xbox architecture isimp2005-11-091-0/+39
* MFamd64: indent with tabs instead of spaces.peter2005-11-041-1/+1
* Undo the change to pci_cfgdisable() on i386 for now. It seems to fixwpaul2005-10-251-6/+2
* Modify the pci_cfgdisable() routine to bring it more in line withwpaul2005-10-251-3/+7
* Expose legacy_pcib_alloc_resource, and use it in the mptable pci busimp2005-09-171-1/+1
* Commit a workaround to a problem with resource allocation. This helpsimp2005-09-161-0/+2
* Note that pc98 specific defines maybe would be better in a header file.imp2005-09-081-0/+1
* - Ignore BIOS IRQs (that is, IRQ settings left by the BIOS or a previous OSjhb2005-07-131-1/+10
* Trust the settings programmed by the BIOS over what the $PIR says.jhb2005-04-141-18/+48
* Add code to read the primary PCI bus number out of the Compaq/HP 6010jhb2005-03-251-0/+6
* Make a bunch of malloc types static.phk2005-02-101-1/+1
* /* -> /*- for copyright notices, minor format tweaks as necessaryimp2005-01-063-3/+3
* Remove a stray critical_exit().scottl2004-12-131-1/+0
* Expand the scope of the critical section in the PCIe read and write methodsscottl2004-12-101-4/+14
* Due to a significant addition of code, add my copyright to this file. Alsoscottl2004-12-061-0/+1
* Add support for the memory-mapped PCI Express configuration mechanism. Thisscottl2004-12-061-8/+211
* Add TUNABLE_LONG and TUNABLE_ULONG, and use the latter for thedes2004-10-311-4/+3
* Whitespace cleanupdes2004-10-311-8/+8
* Make the lower range of the memory area 0x80000000 again. Alsoimp2004-10-111-1/+15
* Add missing 'static'imp2004-10-061-2/+1
* For legacy PCI bridges, limit memory allocation to the top 32MB ofimp2004-10-061-4/+24
* Consistently use __inline instead of __inline__ as the former is an empty macrostefanf2004-07-041-1/+1
* Trim a few things from the dmesg output and stick them under bootverbose tojhb2004-07-012-4/+5
* Remove atdevbase and replace it's remaining uses with direct references tojhb2004-06-101-0/+1
* Allow the pir0 device add to fail since pir0 may already exist. This shouldjhb2004-06-011-2/+2
* Add some missing <sys/module.h> includes which are masked by thephk2004-05-302-0/+2
* - Create a pir0 psuedo device as a child of legacy0 if we attach a legacyjhb2004-05-042-8/+125
* Make the legacy_pcib_attach() function static.jhb2004-05-031-1/+1
* Don't call the BIOS to route a link that has already been routed by thejhb2004-04-161-2/+3
* Add back an include to fix the build for the CPU_ELAN case.jhb2004-02-191-0/+3
* Switch to using the new $PIR interrupt routing code and remove the oldjhb2004-02-182-434/+17
* Rework the $PIR (aka PCIBIOS) PCI interrupt routing code and split it offjhb2004-02-181-609/+445
* Replace an outb() during the test for configuration mechanism #1 with ajhb2003-12-312-2/+2
* New APIC support code:jhb2003-11-032-98/+4
* Lower the priority of the legacy host to pci bridge driver so that otherjhb2003-10-311-1/+1
OpenPOWER on IntegriCloud