summaryrefslogtreecommitdiffstats
path: root/sys/dev/wi
Commit message (Expand)AuthorAgeFilesLines
* The two PLANEX cards listed in pccarddevs, identified only by theirimp2005-02-011-1/+1
* Use Intersil chip names for the symbols, since many makers use theimp2005-01-201-3/+3
* Add support for SENAO SL-2511CDimp2005-01-201-1/+2
* Call wi_free after we turn off the interrupts. If we call it before,imp2005-01-191-2/+2
* Start each of the license/copyright comments with /*-, minor shuffle of linesimp2005-01-067-7/+7
* Eliminate some of the egregious bypass of the 802.11 statesam2005-01-011-18/+20
* Diff reduce wi_write_wep() relative to revision 1.168mdodd2004-12-171-41/+38
* Fix wep operation for station mode:sam2004-12-171-4/+28
* set ic_ibss_chan when entering RUN state to match ic_bss so the channelsam2004-12-171-0/+1
* remove power save logic from the tx path; the driver isn't ready to supportsam2004-12-171-6/+0
* o Update for net80211 changessam2004-12-083-205/+238
* Second part of ALTQ driver modifications, covering:mlaier2004-08-011-10/+6
* Link ALTQ to the build and break with ABI for struct ifnet. Please recompilemlaier2004-06-131-0/+2
* Only match cards that claim to be network cards. I've had twoimp2004-06-091-0/+10
* Fix disordering of pccarddevs.h noticed by bde. Also remove a fewimp2004-05-271-21/+1
* Move to generating pccarddevs.h on the fly, both for the kernel andimp2004-05-261-1/+1
* It turns out that the module dependency on pccard is in error. Sinceimp2004-05-081-1/+0
* radiotap updates:sam2004-04-012-6/+13
* correct xmit-side radiotap collection by tap'ing the frame beforesam2004-04-011-4/+4
* Add support for a new variant of the prism3 that has appaered in theimp2004-03-251-0/+1
* Don't announce MAC addresses twice.mdodd2004-03-201-1/+0
* Eliminate bogus usage of WI_RSSI_TO_DBM(). Not only does it boguslygreen2004-03-171-4/+2
* Convert callers to the new bus_alloc_resource_any(9) API.njl2004-03-172-8/+8
* update radiotap support to reflect recent changes:sam2003-12-282-13/+14
* o eliminate widespread on-stack mbuf use for bpf by introducingsam2003-12-281-34/+12
* Fix slight disordering of supported cards.imp2003-12-271-3/+3
* Older versions of the intersil firmware is a lot slower than newerimp2003-12-092-1/+8
* Fix Lucent cards.imp2003-12-021-10/+25
* Truly fix the lockup mentioned in 1.153. The PRISM hardware is notgreen2003-11-041-0/+9
* Despite making the card not lock up, thae workaround from 1.153 didn'tgreen2003-11-041-3/+0
* Fix wi(4)'s WI_RID_SCAN_RES ioctl (wicontrol -L). The wrong lengthgreen2003-11-041-9/+13
* On my ZoomAir-branded Intersil PRISM2 cards, if you try to set thegreen2003-11-041-0/+3
* Replace the if_name and if_unit members of struct ifnet with new membersbrooks2003-10-311-2/+1
* mark interrupt handlers MPSAFEsam2003-10-291-1/+1
* Sony PEGA-WL110 Wireless LANimp2003-09-221-0/+1
* New Proxim Harmony OEM card.imp2003-09-201-0/+1
* o add experimental radiotap capture formatsam2003-09-055-13/+125
* This doesn't work, so back them out.imp2003-08-241-2/+2
* Return -100 rather than 0 for pccard probe routines. This allowsimp2003-08-241-2/+2
* Prefer new location of pci include files (which have only been in theimp2003-08-221-2/+2
* LINKSYS2 -> BROMAXimp2003-08-211-3/+3
* Update to reflect NETGEAR_2 -> INTERSIL and INTERSIL -> INTERSIL2imp2003-08-211-2/+2
* MFp4 changes to fix locking issues and correct referencesam2003-08-191-22/+51
* Add microsoft mn-520 wlan card.imp2003-08-141-0/+1
* Add the PCI Id of the Intersil prism3 (mini-PCI) WLAN chip. The Vaiomarcel2003-08-081-0/+1
* Fix a couple of bugs in the resume handler. Don't call the if_initjdp2003-07-261-2/+3
* o Add monitor mode support. This tested fine with prism cards but may requiresam2003-07-211-2/+29
* track changes to 802.11 code:sam2003-07-202-22/+23
* Add Addtron AWA-100 wireless PCI cardimp2003-07-191-0/+1
* Add Linksys WCF12: from Scott Lambertimp2003-07-191-0/+1
OpenPOWER on IntegriCloud