summaryrefslogtreecommitdiffstats
path: root/sys/dev/vr
Commit message (Expand)AuthorAgeFilesLines
* Revise attach/detach resource cleanupnjl2003-04-171-4/+14
* - Don't call pci_enable_io() in drivers (unless needed for resume).mdodd2003-04-161-18/+0
* - Express hard dependencies on bus (pci, isa, pccard) andmdodd2003-04-151-1/+3
* Fix if_vr's handling of vr_encap failures. 3 parts:silby2003-04-091-10/+9
* Use __FBSDID rather than rcsid[].obrien2003-04-031-7/+3
* Add missing ()'s so that these drivers all compile again.jhb2003-03-311-1/+1
* Clean up locking and resource management for pci/if_*njl2003-03-311-35/+28
* Switch vr_encap over to using m_defrag instead of its own versionsilby2003-03-291-14/+2
* Back out M_* changes, per decision of the TRB.imp2003-02-191-4/+4
* Add deviceids for 6105 and 6105M chips. Further changes will be necessarysilby2003-02-012-0/+6
* Switch the if_vr driver from using our generic MII routines over tosilby2003-02-012-0/+93
* Fixes from Thomas Nystrom to fix hanging problems experienced by vr cardssilby2003-01-312-34/+75
* Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.alfred2003-01-211-4/+4
* When reading PHY regs over the i2c bus, the turnaround ACK bitmbr2003-01-101-1/+1
* Import some relevant changes from Via's if_fet driver:silby2002-11-252-2/+29
* o track either_ifattach/ether_ifdetach API changessam2002-11-141-16/+5
* Be consistent about functions being static.phk2002-10-161-9/+9
* style: put return types on a line by themselves.alfred2002-08-241-31/+62
* Improve handling of TX errors. Early reports indicate that thissilby2002-08-152-13/+28
* Make sure to set the DMA transfer length register, plus onesilby2002-08-051-1/+6
* Make sure to set both sets of registers which control the RX and TX buffersilby2002-07-312-0/+49
* Enhance the use of the watchdog timer in this driver so that it willsilby2002-05-151-4/+3
* Change callers of mtx_init() to pass in an appropriate lock type name. Injhb2002-04-041-1/+2
* Remove __P.alfred2002-03-201-37/+37
* Remove printf's on mbuf/cluster allocation failures. There are nowluigi2001-12-141-6/+1
* Apply patch supplied by Jonathan Chen: use the correct arguments towpaul2001-07-091-2/+2
* Change m_devget()'s outdated and unused `offset' argument to actually meanbmilekic2001-06-201-3/+2
* Close PR 22208: bring chip out of suspend mode, because Windows mightwpaul2001-05-142-0/+15
* Remember to actually program the MAC address into the unicast filterwpaul2001-03-071-0/+7
* Big round of minor updates:wpaul2001-02-211-23/+17
* Change and clean the mutex lock interface.bmilekic2001-02-091-2/+2
* Convert if_multiaddrs from LIST to TAILQ so that it can be traversedphk2001-02-061-1/+1
* Use LIST_FOREACH() to traverse ifp->if_multiaddrs list, instead ofphk2001-02-031-2/+1
* Set the OACTIVE flag if vr_encap() fails.wpaul2001-01-201-0/+1
* Bug fixes that I've put together while working on a project in the office:wpaul2001-01-191-3/+7
* Implement MTX_RECURSE flag for mtx_init().bmilekic2001-01-191-1/+1
* Initialize/grab the mutex earlier in the attach phase, so thatwpaul2000-12-041-2/+3
* Remove unneeded #include <machine/clock.h>phk2000-10-151-1/+0
* Use device_get_nameunit(dev) as the mutex string when callingwpaul2000-10-131-1/+1
* First round of converting network drivers from spls to mutexes. Thiswpaul2000-10-132-29/+49
* Make all Ethernet drivers attach using ether_ifattach() and detach usingarchie2000-07-131-6/+3
* Close PR# 19617: add support for VIA VT6102 NICs to VIA Rhine driver.wpaul2000-07-052-0/+3
* Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/peter2000-05-281-3/+3
* Move code to handle BPF and bridging for incoming Ethernet packets outarchie2000-05-141-36/+0
* Depend on miibus.peter2000-04-291-0/+2
* Change contigmalloc() lower memory bound from 1MB to 0 to improvewpaul1999-09-251-1/+1
* As suggested by phk, unconditionalize BPF support in these drivers. Sincewpaul1999-09-231-10/+2
* Tweak these for what I hope is the last time: change the DRIVER_MODULE()wpaul1999-09-221-1/+1
* Un-do the changes to the DRIVER_MODULE() declarations in these drivers.wpaul1999-09-201-2/+2
* Grrr. Okay, changing the devnames was a bad idea. Put them back the waywpaul1999-09-201-1/+1
OpenPOWER on IntegriCloud