summaryrefslogtreecommitdiffstats
path: root/sys/dev/sf
Commit message (Expand)AuthorAgeFilesLines
* Mechanically substitute flags from historic mbuf allocator withglebius2012-12-041-2/+2
* Remove unused variable mii.kevlo2012-05-111-2/+0
* Remove duplicate assignment of SF_IMR_RXDQ2_DMADONE bitkevlo2012-02-271-1/+1
* Add check for IFF_DRV_RUNNING flag after serving an interrupt andyongari2012-02-231-8/+15
* With r232015, sf(4) gets correct speed/duplex of established link.yongari2012-02-231-4/+12
* Remove taskqueue based MII stat change handler.yongari2012-02-232-24/+7
* No need to reprogram hardware RX filter when driver is not running.yongari2012-02-231-1/+2
* Introduce sf_ifmedia_upd_locked() and have driver reset PHY beforeyongari2012-02-231-9/+17
* If there are not enough RX buffers, release partially allocated RXyongari2012-02-231-0/+1
* Give hardware chance to drain active DMA cycles.yongari2012-02-231-0/+3
* - There's no need to overwrite the default device method with the defaultmarius2011-11-221-5/+1
* - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOPmarius2011-05-031-5/+3
* Converted the remainder of the NIC drivers to use the mii_attach()marius2010-10-151-4/+4
* Remove unnecessary controller reinitialization.yongari2010-09-211-1/+9
* Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/rwatson2009-06-261-2/+2
* When user_frac in the polling subsystem is low it is going to busy theattilio2009-05-301-7/+13
* Fix build.yongari2008-01-211-2/+2
* Overhaul sf(4) to make it run on all architectures and implementyongari2008-01-212-965/+2122
* It seems that the firmware for TxGFP does not work at all. I couldyongari2008-01-211-0/+1
* Import AIC-6915 firmware for GFP from Adaptec.yongari2008-01-212-0/+235
* Forced commit to note that sf(4) was repocopied from sys/pciyongari2008-01-211-1/+1
* Fix function prototype for device_shutdown method.yongari2007-11-221-2/+4
* o break newbus api: add a new argument of type driver_filter_t topiso2007-02-231-1/+1
* Whitespace nits.ru2006-09-151-1/+1
* Consistently use if_printf() only in interface methods: if_start,glebius2006-09-152-3/+5
* Remove various bits of conditional Alpha code and fixup a few comments.jhb2006-05-121-5/+0
* Do not touch ifp->if_baudrate in miibus aware drivers.glebius2006-02-141-1/+0
* - Store pointer to the link-level address right in "struct ifnet"ru2005-11-111-3/+3
* Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntaximp2005-10-221-1/+1
* In detach method, move if_free() after bus_teardown_intr().ru2005-10-131-2/+3
* - Don't pollute opt_global.h with DEVICE_POLLING and introduceglebius2005-10-051-0/+4
* Big polling(4) cleanup.glebius2005-10-011-44/+45
* Fix "struct ifnet" leaks when attach() fails in the middle, e.g.ru2005-09-161-2/+2
* Fixup locking for sf(4) and mark MPSAFE:jhb2005-08-182-53/+83
* Use if_printf() and device_printf() and axe sf_unit from the softc as ajhb2005-08-102-21/+16
* Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE andrwatson2005-08-091-11/+11
* Modify device drivers supporting multicast addresses to lock if_addr_mtxrwatson2005-08-031-0/+2
* Move if_alloc() up so it's before mii_phy_probe().brooks2005-06-111-6/+7
* Stop embedding struct ifnet at the top of driver softcs. Instead thebrooks2005-06-102-15/+24
* Remove bus_{mem,p}io.h and related code for a micro-optimization on i386nyan2005-05-291-2/+0
* Fix style(9) issues with __P removal.imp2005-02-241-37/+35
* Return BUS_PROBE_DEFAULT instead of 0.imp2005-02-241-6/+6
* /* -> /*- for license, minor formatting changesimp2005-01-072-2/+2
* Correct URL of the programming manual.brueffer2004-11-171-1/+1
* Add missing /* DEVICE_POLLING */brueffer2004-11-171-1/+1
* Add altq support.brueffer2004-11-121-7/+9
* Add device polling supportbrueffer2004-11-102-0/+109
* Tag a last set of PCI network interfaces as IFF_NEEDSGIANT until theyrwatson2004-08-281-1/+2
* Whitespace nitbms2004-07-051-1/+1
* Eliminate redundant return keywords.bms2004-07-051-29/+0
OpenPOWER on IntegriCloud