summaryrefslogtreecommitdiffstats
path: root/sys/dev/puc
Commit message (Expand)AuthorAgeFilesLines
* MFC: r264257, r264327, r264514marius2014-04-221-4/+64
* Clean up -Wheader-guard warnings.pluknet2013-06-172-2/+2
* All of Oxford/PLX OX16PCI954, OXm16PCI954 and OXu16PCI954 share themarius2013-06-131-1/+25
* Fix whitespace and normalize some entries.marius2013-06-131-22/+22
* Correct the definition for Exar XR17V258IV: we must use a config_functionrstone2013-03-181-0/+1
* Add support for Exar XR17V358 8-port serial device to puc(4)rstone2013-03-151-0/+20
* - Apparently, r186520 was just wrong and the clock of Oxford OX16PCI958 ismarius2013-03-011-7/+8
* Do not require a filter-only interrupt handler for puc ports that are notjhb2013-01-151-1/+1
* Add support for Advantech PCI-1602 RS-485/RS-422 serial cardeadler2012-11-091-0/+6
* Add support for SIIG Cyber Serial Dual PCI 16C850eadler2012-08-051-0/+6
* Add additional Perle Speed LE serial cardseadler2012-08-051-0/+25
* - Change back "d_ofs" to int8_t to not pessimize padding and size of "struct ...fjoe2012-07-312-6/+15
* Remove Moxa CP-132EL definition (RS422/485-only board).fjoe2012-06-211-6/+0
* Add support for the following Moxa PCIe multiport serial boards:fjoe2012-06-212-4/+39
* Add support for the Sunix SER5437A dual serial PCI Express card.jhay2012-06-081-0/+6
* Add support for Sun 1040 PCI Quad Serialeadler2012-05-301-0/+6
* - There's no need to overwrite the default device method with the defaultmarius2011-11-222-4/+4
* - add support for Titan VScom PCIex-800Headler2011-11-151-0/+12
* - add support for CP-104EL-A and CP-104JU to puceadler2011-11-111-0/+27
* Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.ed2011-11-071-1/+1
* - add support for I-O DATA RSA-PCI2/Readler2011-10-151-0/+6
* Add Oxford Semiconductor OXPCIe952 (0x1c38) 1 port serial card.ae2011-09-291-0/+7
* Add device id for the Moxa CP-112UL dual-port serial adapters.jhb2011-08-151-0/+6
* Add location and pnpinfo strings for puc device ports. The location isjhb2011-06-144-2/+47
* Some style fixes.jhb2011-06-061-6/+4
* - Rename the Cronyx Omega2-PCI entry to Exar XR17C158 since that is thejhb2011-06-031-13/+27
* For Timedia multiport serial adapters, the first two ports use a SUN1889jhb2011-05-261-0/+6
* Add support for the SIIG Cyber 2S PCIe adapter. It is based on anjhb2011-05-191-0/+6
* Add an entry for the SIIG Quartet Serial 850 which uses an Oxfordjhb2011-05-101-0/+6
* Add an entry for the Kuroutoshikou SERIAL4P-LPPCI2 which uses an Oxfordjhb2011-05-021-0/+6
* Add support for Oxford PCI Express Expresso family devices.jhb2011-04-281-1/+134
* Add Exar octal PCI UART.emaste2010-12-181-0/+6
* Add support for the Perle Speed4 LE.jhb2010-05-201-0/+12
* Fix interrupt handling. It started off broken and grew worse over time.marcel2009-12-111-46/+62
* Add support for the NetMos NM9865 family of Serial/Parallel ports.marcel2009-12-071-3/+39
* Make puc(4) aware of this 2 port serial card based on NetMos 9835:np2009-06-201-0/+6
* Add support for the four PUC serial interfaces found on IBM SurePOS 300rwatson2009-06-021-0/+11
* remove now-redunant cardbus attachment lines.imp2009-03-091-1/+0
* Add support for the single-port NetMos NM9835 serial adapter. The puc(4)jhb2009-03-051-0/+12
* Add support for the Sunix SUN1889-based dual parallel port card.kevlo2009-02-121-0/+6
* - Add support for Moxa Technologies CP-168EL/PCIe card.stas2009-01-271-0/+6
* Add support for the Oxford OX16PCI958-based card.rik2008-12-271-0/+6
* Add an entry for the "SIIG Cyber 4 PCI 16550", which is a four-port carddes2008-10-251-0/+6
* Revert r179409; it breaks all OX16PCI954-based cards except the SIIG 4.des2008-10-131-4/+4
* Add the Decision Computer Inc, PCCOM 8-port serial card.thompsa2008-08-221-0/+6
* Add the VScom PCI-100L card.thompsa2008-08-221-0/+6
* Add the Avlab Technology PCI IO 4S-850 4 port serial card.thompsa2008-08-211-0/+6
* The SIIG 4 port serial card based on the Oxford OX16PCI954 ismckusick2008-05-291-4/+4
* Fix RID calculation. The RID is really the BAR for PCI cards,marcel2008-05-161-1/+1
* o Add Moxa Technologies CP-104EL PCI Express 4 port Serial card.maxim2008-01-121-0/+6
OpenPOWER on IntegriCloud