summaryrefslogtreecommitdiffstats
path: root/sys/dev/pci
Commit message (Expand)AuthorAgeFilesLines
* Improve on previous fix: Clean up getirq() as well, and remove redundantse1997-01-251-9/+8
* Make IRQ 0 invalid in pci_map_int(), since it is hardwired to these1997-01-231-1/+1
* Add PCI LKM support.se1997-01-211-290/+389
* Make the long-awaited change from $Id$ to $FreeBSD$jkh1997-01-143-3/+3
* Add support for header type == 1 devices (PCI 2.1 compatible PCI to PCIse1996-11-122-4/+10
* Fix PCI to PCI bridge register bit field masks.se1996-11-122-36/+11
* Add support for ioctl() accesses to PCI config space registers.se1996-10-222-4/+167
* pci_map_mem() did a too restrictive check on the mapping type:se1996-10-141-2/+4
* Removed more devconf leftovers.bde1996-09-102-40/+2
* Various cleanups for remanents of devconf.phk1996-09-081-11/+1
* Remove devconf, it never grew up to be of any use.phk1996-09-062-79/+5
* Fix code that deals with multiple host to PCI bridges by making the nextse1996-09-051-1/+2
* Add preliminary support for the Orion PCI chip set. It is special in these1996-09-021-21/+52
* Scan PCI buses in order the BIOS has assigned them. This is sometimesasami1996-06-091-2/+4
* Fix range check to actually test the variable that will be used asse1996-05-181-2/+2
* Fix logic bug in pci bridge code. For a PCI-PCI bridge, secondaryasami1996-04-251-2/+2
* Update PCI bus code from my current sources:se1996-04-141-155/+165
* Removed now-unused #includes of <machine/cpu.h>. They were for bootverbosebde1996-04-071-3/+1
* Fixed unsigned longs that should have been vm_offset_t.bde1996-03-191-2/+2
* Remove limit of port I/O addresses to 65K, since PCI specifies 32 bitse1996-02-191-3/+5
* Add generic PCI to PCI bridge support.se1996-02-171-21/+68
* Add heuristic to detect multi-function devices that don't announce thisse1996-01-301-34/+79
* Decode configuration for the IDE part of the Triton chipset. Thiswollman1996-01-271-1/+8
* Add support for multi-function devices.se1996-01-253-11/+32
* Make PCI interrupt handlers return void like everybody else does.se1996-01-232-34/+12
* Fix bad typo: > was used instead of >> ...se1996-01-191-4/+4
* Improve PCI probe messages by printing the bus number.se1996-01-191-3/+3
* Completed function declarations and/or added prototypes and/or addedbde1995-12-161-7/+15
* Fix the off-by-one error in the calculation of the valid port range.se1995-12-151-4/+4
* Another mega commit to staticize things.phk1995-12-141-3/+3
* Untangled the vm.h include file spaghetti.dg1995-12-071-2/+2
* Set default burst length limit to 32 bytes, since this seems to bese1995-12-061-2/+3
* Made pci.c compile again. It unfortunately depends on the isa interruptbde1995-11-211-1/+3
* Completed function declarations and/or added prototypes.bde1995-11-211-3/+6
* Mega commit for sysctl.phk1995-11-201-12/+7
* Fixed bug where wrong thing was being checked for NULL before callingdg1995-10-021-2/+2
* Add vendor ID of Compaq, now that I found what it is ...se1995-09-141-2/+2
* Minor changes to the PCI probe messages.se1995-09-141-7/+6
* Make mapping messages depend on bootverbose flag.se1995-09-071-67/+182
* Initialize "name" to quiet compiler.dg1995-07-291-2/+2
* Add a few vendor IDs.se1995-07-271-8/+21
* Get rid of references to the linker supplied set length field.se1995-07-271-15/+15
* Change message "not supported" to "no driver assigned", becausese1995-06-281-2/+2
* Failure of the consistency checks for BIOS assigned mappings of bussesse1995-06-281-6/+16
* Remove trailing whitespace.rgrimes1995-05-302-9/+9
* bzero the malloced pci_devconf structure. This should fix the problem withdg1995-05-041-1/+2
* Forward-declare kern_devconf for use in a prototype. Some driversbde1995-03-251-1/+3
* Restore my changes to initialize the kdc_shutdown routine pointer. Stefandg1995-03-231-4/+5
* Completely new PCI code:se1995-03-213-568/+1114
* Added a new field to the pci_device struct called pd_shutdown to specifydg1995-03-172-6/+9
OpenPOWER on IntegriCloud