summaryrefslogtreecommitdiffstats
path: root/sys/dev/pci
Commit message (Expand)AuthorAgeFilesLines
* As threatened by BURN_BRIDGES, restire PCIR_MAPS and PCIR_HEADERTYPEimp2005-06-051-6/+0
* Mask off the bar's value after the probe test write before testingimp2005-06-031-2/+2
* Typo.jhb2005-06-011-1/+1
* Don't enable I/O or memory mode in a device's command register if the BARjhb2005-05-311-7/+7
* Add a detach for pci bridge and pci bus drivers. This allows one toimp2005-04-292-0/+2
* In pcib_alloc_resource() check if the resource allocation request ismarcel2005-04-291-0/+16
* Add pci_is_vga_ioport_range() and pci_is_vga_memory_range() as inlinemarcel2005-04-291-0/+18
* Add defines for the Bridge Control Register bits.marcel2005-04-291-0/+13
* Call pci_print_verbose() before pci_add_resources() so that the order ofjhb2005-04-141-1/+1
* Fix compile error :-(.imp2005-04-131-1/+2
* Use pci_find_bsf() to retrieve the PCI device associated withbms2005-04-131-13/+16
* Default to a interrupt router that returns an invalid interrupt.imp2005-04-131-1/+9
* It isn't a whinable offence to want memory when the bar says ioport.imp2005-04-111-6/+8
* Go ahead and try to allocate PCI_BAR(5) for ata devices.imp2005-04-101-0/+1
* fix misspelling of 0x30...jmg2005-04-011-1/+1
* move the statement about switching power states to just before we do it, sojmg2005-04-011-5/+7
* fix a copy/paste typo for scanner/gameport...jmg2005-03-261-2/+2
* add some additional pci classes and sub-classes..jmg2005-03-262-3/+61
* Add code to read the primary PCI bus number out of the Compaq/HP 6010jhb2005-03-251-0/+5
* relocate the power state transition statements to thejmg2005-03-231-15/+5
* Use STAILQ in preference to SLIST for the resources. Insert new resourcesimp2005-03-181-1/+1
* If bus_generic_susped returns an error, devlist is not freed. Free it.imp2005-03-151-1/+3
* Expose pci_cfg_safe/restore for subclasses of pci to use.imp2005-02-282-4/+4
* Use dynamic major number allocation.phk2005-02-271-7/+0
* kill unused variablesam2005-02-251-2/+0
* For the I/O port case, we need to set ok to 1 if we have what looksimp2005-02-181-8/+15
* Enable interrupt routing as first choice on alpha.ticso2005-02-071-1/+1
* Fix typo.njl2005-01-291-2/+1
* Start each of the license/copyright comments with /*-, minor shuffle of linesimp2005-01-066-6/+6
* Fix last second typos that crept in :-(.imp2004-12-311-2/+2
* Implement mimimum system software delays, per PCI PM 1.1 spec, asimp2004-12-311-38/+55
* Fix comments to match last commit, and minor reformatting...imp2004-12-081-16/+16
* It turns out that a lot of newer systems have 'base peripherals' onimp2004-12-081-1/+2
* ACPI is not on pc98 either.njl2004-12-031-1/+2
* Non-x86 platforms cannot use the ACPI includes. This should be fixed butnjl2004-12-031-0/+4
* Turn ACPI and PCI devices off or to a lower power state in suspend andnjl2004-12-021-15/+54
* Make pci_do_powerstate default to 1 now that we've done the release toimp2004-11-101-2/+2
* - Change the ddb paging "support" to use a variable (db_lines_per_page) tojhb2004-11-011-1/+1
* Fix a spelling error in a panic string.green2004-10-141-1/+1
* Re-route interrupts on arm as well.cognet2004-09-231-1/+2
* Disable native ata support for now, too much breaksimp2004-07-021-1/+1
* Trim a few things from the dmesg output and stick them under bootverbose tojhb2004-07-011-1/+1
* Update the special handling code for ATA devices to allow usage ofsos2004-06-291-54/+42
* Do the dreaded s/dev_t/struct cdev */phk2004-06-162-4/+4
* Add missing <sys/module.h> includesphk2004-05-301-0/+1
* Add some missing <sys/module.h> includes which are masked by thephk2004-05-304-2/+6
* Use PCI_BAR() in preference to PCI_MAPS + x * 4.imp2004-05-241-2/+2
* Do not write to those config registers that are unambiguously definedimp2004-05-241-19/+0
* Fix cutNpasto in last commit.imp2004-05-211-1/+1
* ifdef writing to registers that the base pci standard says areimp2004-05-211-0/+13
OpenPOWER on IntegriCloud