| Commit message (Expand) | Author | Age | Files | Lines |
* | When VLAN hardware tagging is disabled, make sure to disable VLAN | yongari | 2010-05-04 | 1 | -1/+2 |
* | Make sure to check whether driver is running before processing | yongari | 2010-05-04 | 1 | -9/+6 |
* | Drop driver lock before exiting from interrupt handler. | yongari | 2010-05-04 | 1 | -0/+1 |
* | Add basic support for Marvell 88E8059 Yukon Optima. | yongari | 2010-04-30 | 2 | -3/+23 |
* | Disable non-ASF packet flushing on Yukon Extreme as vendor's driver | yongari | 2010-04-30 | 2 | -0/+7 |
* | Both RX_GMF_LP_THR and RX_GMF_UP_THR must be 16 bits register. If | yongari | 2010-04-30 | 2 | -4/+4 |
* | With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify | yongari | 2010-04-19 | 1 | -24/+24 |
* | Partial revert r204545. | yongari | 2010-04-07 | 1 | -1/+4 |
* | It seems PCI_OUR_REG_[1-5] registers are not mapped on PCI | yongari | 2010-03-14 | 1 | -10/+10 |
* | Implement Rx checksum offloading for Yukon EC, Yukon Ultra, | yongari | 2010-03-12 | 2 | -47/+204 |
* | Remove taskqueue based interrupt handling. After r204541 msk(4) | yongari | 2010-03-02 | 2 | -155/+26 |
* | Implement rudimentary interrupt moderation with programmable | yongari | 2010-03-01 | 2 | -20/+23 |
* | Make sure to enable flow-control only if established link is | yongari | 2010-03-01 | 1 | -14/+11 |
* | Properly sync status LEs after processing. | yongari | 2010-03-01 | 1 | -9/+2 |
* | Remove trailing white spaces. | yongari | 2010-02-26 | 1 | -4/+4 |
* | Allocate single MSI message. msk(4) used to allocate 2 MSI messages | yongari | 2010-02-26 | 2 | -46/+15 |
* | Don't hardcod register offset to set PCIe max read request size. | yongari | 2010-02-26 | 2 | -29/+20 |
* | Optimize inserting LE for TX checksum computation. Controller does | yongari | 2010-02-26 | 2 | -10/+17 |
* | Add TSO support on VLANs. Controller requires VLAN hardware tagging | yongari | 2010-02-26 | 1 | -6/+11 |
* | Reuse the configured LE for VLAN if new LE was created for TSO. | yongari | 2010-02-26 | 1 | -1/+1 |
* | Correct inversed programming of ethernet hardware address on | yongari | 2010-02-20 | 1 | -10/+16 |
* | Yukon Ultra2 has 126MHz clock. | yongari | 2010-01-22 | 1 | -1/+1 |
* | s/Mhz/MHz/g | yongari | 2010-01-22 | 1 | -8/+8 |
* | It seems generation of link state change of e1000phy(4) is not | yongari | 2009-11-17 | 1 | -0/+2 |
* | Add preliminary Yukon Ultra 2 support(88E8057). The controller | yongari | 2009-11-07 | 2 | -2/+15 |
* | Take a step towards removing if_watchdog/if_timer. Don't explicitly set | jhb | 2009-11-06 | 1 | -2/+0 |
* | It's normal to see Rx FIFO overruns under high network load and | yongari | 2009-11-06 | 1 | -3/+1 |
* | Remove unnecessary header file. | yongari | 2009-11-06 | 1 | -1/+0 |
* | - Add support for Marvell Yukon 88E8042 device. | lulf | 2009-10-25 | 2 | -0/+3 |
* | Add DGE-560SX(Yukon XL) to the supported device list. Many thanks | yongari | 2009-09-28 | 2 | -0/+3 |
* | Add workaround for Yukon XL which has hardware bug that can't flush | yongari | 2009-09-28 | 1 | -3/+8 |
* | Add hack to pass controller specific information to phy driver. | yongari | 2009-09-28 | 2 | -15/+25 |
* | Fix MIB statistics clear routine. This should fix alignment errors on sparc64. | yongari | 2009-09-28 | 1 | -1/+1 |
* | Revert previous commit and add myself to the list of people who should | phk | 2009-09-08 | 1 | -0/+5 |
* | Add necessary include. | phk | 2009-09-08 | 1 | -5/+0 |
* | Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/ | rwatson | 2009-06-26 | 1 | -2/+2 |
* | Add Yukon Extreme device ids, 88E8071 and 88E8072. | yongari | 2009-06-02 | 2 | -3/+9 |
* | Add Rx checksum offloading support for Yukon FE+ and Yukon Extreme. | yongari | 2009-06-02 | 2 | -8/+67 |
* | Add frame parser capability of Yukon FE+ and Yukon Extreme. With | yongari | 2009-06-02 | 2 | -13/+47 |
* | Add preliminary Yukon Extreme support and register definitions. | yongari | 2009-06-02 | 2 | -34/+198 |
* | Correct controller description for 88E8035, 88E8036, 88E8038 and | yongari | 2009-05-25 | 1 | -4/+4 |
* | Simplify SIOCSIFFLAGS handler. | yongari | 2009-05-25 | 1 | -12/+8 |
* | Be consistent with other capability checking. | yongari | 2009-05-25 | 1 | -7/+8 |
* | Don't reinitialize controller when interface is already running. | yongari | 2009-05-25 | 1 | -1/+9 |
* | If interface is not UP, don't return media status. | yongari | 2009-05-25 | 1 | -0/+4 |
* | Add device ids for Yukon FE+(88E8040, 88E8040T, 88E8048 and 88E8070). | yongari | 2009-05-25 | 2 | -1/+13 |
* | Add workaround for Yukon FE+ A0. This controller is known to have | yongari | 2009-05-25 | 2 | -11/+52 |
* | Add preliminary Yukon FE+ support and register definitions. | yongari | 2009-05-25 | 2 | -4/+20 |
* | Explicitly reset GMAC Controls and initialize GM_GP_CTRL register. | yongari | 2009-05-25 | 1 | -10/+8 |
* | Disable HW WOL for Yukon EC Ultra. While I'm here use switch | yongari | 2009-05-25 | 1 | -11/+15 |