summaryrefslogtreecommitdiffstats
path: root/sys/dev/msk/if_msk.c
Commit message (Expand)AuthorAgeFilesLines
* For Yukon II controllers that implement optional temperature sensoryongari2012-04-251-0/+3
* ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it againkevlo2012-01-071-1/+0
* Increase wait time for OP_TCPSTART command processing. It seemsyongari2011-12-191-2/+2
* - There's no need to overwrite the default device method with the defaultmarius2011-11-221-10/+2
* Enable 64bit DMA addressing support for all msk(4) controllers.yongari2011-11-161-52/+140
* Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.yongari2011-10-171-1/+1
* Correctly check MAC running status before disabling TX/RX MACs.yongari2011-05-311-1/+1
* style(9)yongari2011-05-241-16/+17
* When MTU is changed, check whether driver should be reinitialized oryongari2011-05-231-1/+4
* Add initial support for Marvell 88E8055/88E8075 Yukon Supreme.yongari2011-05-231-4/+19
* Do not touch ASF related register for controllers that do not haveyongari2011-05-231-17/+24
* Make sure to enable all clocks before accessing registers.yongari2011-05-231-31/+23
* Do not configure RAM registers for controllers that do not haveyongari2011-05-231-2/+8
* Rework store and forward configuration of TX MAC FIFO. Basically ityongari2011-05-231-23/+10
* Do not blindly clear entire GPHY control register. It seems someyongari2011-05-231-2/+2
* When msk_detach() is called from msk_attach(), ifp may beglebius2011-04-251-1/+2
* Do a sweep of the tree replacing calls to pci_find_extcap() with calls tojhb2011-03-231-2/+2
* Introduce signed and unsigned version of CTLTYPE_QUAD, renamingmdf2011-01-191-3/+3
* Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier.mdf2011-01-191-1/+1
* Fix endianness bug introduced in r205091.yongari2010-12-311-1/+1
* o Flesh out the generic IEEE 802.3 annex 31B full duplex flow controlmarius2010-11-141-5/+7
* Fix typos.brucec2010-11-091-9/+9
* Convert the PHY drivers to honor the mii_flags passed down and convertmarius2010-10-151-11/+10
* Catch up to rename of the constant for the Master Data Parity Error bit injhb2010-09-091-2/+2
* When VLAN hardware tagging is disabled, make sure to disable VLANyongari2010-05-041-1/+2
* Make sure to check whether driver is running before processingyongari2010-05-041-9/+6
* Drop driver lock before exiting from interrupt handler.yongari2010-05-041-0/+1
* Add basic support for Marvell 88E8059 Yukon Optima.yongari2010-04-301-3/+17
* Disable non-ASF packet flushing on Yukon Extreme as vendor's driveryongari2010-04-301-0/+5
* Both RX_GMF_LP_THR and RX_GMF_UP_THR must be 16 bits register. Ifyongari2010-04-301-2/+2
* With r206844, CSUM_TCP is also set for CSUM_TSO case. Modifyyongari2010-04-191-24/+24
* Partial revert r204545.yongari2010-04-071-1/+4
* It seems PCI_OUR_REG_[1-5] registers are not mapped on PCIyongari2010-03-141-10/+10
* Implement Rx checksum offloading for Yukon EC, Yukon Ultra,yongari2010-03-121-47/+203
* Remove taskqueue based interrupt handling. After r204541 msk(4)yongari2010-03-021-152/+26
* Implement rudimentary interrupt moderation with programmableyongari2010-03-011-20/+20
* Make sure to enable flow-control only if established link isyongari2010-03-011-14/+11
* Properly sync status LEs after processing.yongari2010-03-011-9/+2
* Remove trailing white spaces.yongari2010-02-261-4/+4
* Allocate single MSI message. msk(4) used to allocate 2 MSI messagesyongari2010-02-261-44/+13
* Don't hardcod register offset to set PCIe max read request size.yongari2010-02-261-29/+18
* Optimize inserting LE for TX checksum computation. Controller doesyongari2010-02-261-10/+16
* Add TSO support on VLANs. Controller requires VLAN hardware taggingyongari2010-02-261-6/+11
* Reuse the configured LE for VLAN if new LE was created for TSO.yongari2010-02-261-1/+1
* Correct inversed programming of ethernet hardware address onyongari2010-02-201-10/+16
* Yukon Ultra2 has 126MHz clock.yongari2010-01-221-1/+1
* s/Mhz/MHz/gyongari2010-01-221-8/+8
* It seems generation of link state change of e1000phy(4) is notyongari2009-11-171-0/+2
* Add preliminary Yukon Ultra 2 support(88E8057). The controlleryongari2009-11-071-2/+12
* Take a step towards removing if_watchdog/if_timer. Don't explicitly setjhb2009-11-061-2/+0
OpenPOWER on IntegriCloud