summaryrefslogtreecommitdiffstats
path: root/sys/dev/mii
Commit message (Expand)AuthorAgeFilesLines
* Remove duplicate const specifiers in many drivers (I hope I got all ofdim2012-11-051-1/+1
* Recognize the Marvell 88E1145 Quad Gigabit PHY.jmallett2012-10-291-0/+1
* For 5717C/5719C/5720C and 57765 PHYs, do not perform any specialyongari2012-10-111-0/+9
* Remove unused variable ma.kevlo2012-09-231-2/+0
* Merging of projects/armv6, part 5gonzo2012-08-153-1/+243
* Add support for 88E1116R.hrs2012-07-281-1/+6
* More Cicada/Vitesse PHY ids.raj2012-05-252-1/+10
* Prefer RL_GMEDIASTAT register to RGEPHY_MII_SSR register toyongari2012-02-281-6/+12
* Add Seeq Technology 80220 PHY support to smcphy(4). This PHY isyongari2012-02-231-4/+60
* Probe the National DP83849, which is a dual-port version of the PHYTER.marius2012-02-192-3/+6
* - Probe BCM57780.marius2012-02-192-2/+6
* - In mii_attach(9) just set the driver for a newly added miibus(4) instancemarius2011-12-051-3/+3
* Wrap BCM5785 in #ifdef notyet for now. According to yongari@ there aremarius2011-11-231-0/+2
* Use DEVMETHOD_END.marius2011-11-2328-32/+29
* Probe the BCM5785.marius2011-11-231-0/+1
* Sync with NetBSD rev. 1.104marius2011-11-231-1/+14
* s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mentionmarius2011-11-221-1/+1
* - There's no need to overwrite the default device method with the defaultmarius2011-11-221-2/+1
* For IP1001 PHY, do not set multi-port device(MASTER). Ideally thisyongari2011-11-221-1/+2
* There's no need export the device interface methods of miibus(4).marius2011-11-182-7/+6
* - Add a hint.miibus.X.phymask hint, allowing do individually exclude PHYmarius2011-11-181-39/+111
* - Import the common MII bitbang'ing code from NetBSD and convert drivers tomarius2011-11-012-0/+234
* Recognize BCM5720C PHY.yongari2011-10-282-0/+2
* - Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHYmarius2011-10-085-700/+0
* r221812 reveals that at least some Broadcom PHYs default to being not onlymarius2011-08-192-5/+17
* Add detection for the Marvel 88E1149R and treat it just like theimp2011-06-302-1/+6
* - There's no need for nibbletab to be static, it's const however.marius2011-05-141-3/+3
* Explicitly clear 1000baseT control register for F1 PHY used inyongari2011-05-121-0/+12
* Some PHYs like the Level One LXT970 optionally can default to isolationmarius2011-05-121-6/+9
* Fix whitespace.marius2011-05-101-1/+1
* Fix a bug in r221407; this driver doesn't add the media itself.marius2011-05-101-1/+1
* Recognize BCM5719C PHY.yongari2011-05-092-0/+2
* Enable Ethernet@WireSpeed for BCM5718/BCM57765 family. While I'myongari2011-05-051-1/+1
* - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOPmarius2011-05-0337-1462/+934
* Probe the PHY accompanying BCM57765.marius2011-05-022-0/+2
* Correct spelling in comments.marius2011-04-228-12/+12
* Add Realtek RTL8201E 10/100 PHY found in RTL8105E controller. Theyongari2011-01-262-0/+2
* - Allow IFM_FLAG0 to be set indicating that auto-negotiation with manualmarius2011-01-141-22/+29
* - Don't announce PAUSE support for half-duplex when MIIF_FORCEPAUSE ismarius2011-01-142-6/+8
* - Even after masking the media with IFM_GMASK the result may have bitsmarius2011-01-143-16/+13
* - Masking IFM_GMASK when also masking IFM_FDX is redundant and justmarius2011-01-143-21/+20
* Add RDC Semiconductor R6040 10/100 PHY driver.yongari2010-12-303-0/+344
* - Add a comment regarding the fact that as documented in the datasheetmarius2010-12-211-3/+7
* Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernetyongari2010-12-182-0/+48
* Allow pause support advertisement to be turned off again.marius2010-11-272-0/+2
* Ensure Bay flow control is disabled as we're going to use IEEE 802.3 annexmarius2010-11-261-1/+13
* - Also probe BCM5214 and BCM5222.marius2010-11-222-11/+53
* Add support for flow control.marius2010-11-223-6/+10
* Given that unlike f.e. rgephy(4) these drivers doen't explicitly start anmarius2010-11-222-0/+4
* Given that unlike f.e. rgephy(4) this driver doesn't explicitly start anmarius2010-11-221-0/+2
OpenPOWER on IntegriCloud