summaryrefslogtreecommitdiffstats
path: root/sys/dev/isp
Commit message (Expand)AuthorAgeFilesLines
* temp fix for internal queue overflow problemmjacob1999-04-141-14/+34
* Staticize.eivind1999-04-111-2/+2
* Make firmware revision a triple. Clean up some FC init stuff formjacob1999-04-041-73/+138
* oops on this lastmjacob1999-04-041-3/+2
* F/W revisions now a tuple (not a duple). Fix pre-CAM code.mjacob1999-04-041-19/+57
* Fix for pre-CAM kernels (again). Turn back on fast posting.mjacob1999-04-041-35/+16
* Remove incorrect BIG_ENDIAN defines and substitute in the SBus only macrosmjacob1999-04-041-126/+45
* Change f/w revision to major,minor,micro version. Add in ISP1040C definition.mjacob1999-04-041-5/+8
* roll ISP1040 and ISP2100 f/w to latest releasemjacob1999-04-041-13460/+13587
* Read the board revision and trim cache line size back from 16 to 1mjacob1999-04-041-8/+71
* Annoying little nigglet- apparently *some* Qlogic temporarily ignoremjacob1999-03-261-2/+10
* enable 1080 LVD supportmjacob1999-03-251-21/+19
* Add in 1080 LVD support and some basis also for the 1240. The port databasemjacob1999-03-256-302/+413
* roll internal tag levelmjacob1999-03-251-3/+2
* roll internal tag levelmjacob1999-03-252-4/+4
* Prep for 1080/1240 support. Those fine h/w engineers at Qlogicmjacob1999-03-171-80/+185
* A wad of changes- prepping for 1080/1240 support (which caused a massivemjacob1999-03-179-350/+2918
* Cleanup. Set all PCI parameters of importance. Set a define that willmjacob1999-02-091-15/+105
* Roll internal release tag. Roll core version minor. Fix broken DPARM_DEFAULTmjacob1999-02-091-5/+8
* clean up some NVRAM definesmjacob1999-02-091-9/+5
* Add in defines that disable (temp) fast posting.mjacob1999-02-091-3/+7
* Allow fibre channel 'bus resets' to go through. Handle Loop Down/Loop Upmjacob1999-02-091-13/+43
* Roll internal release tag. Print out if we're in a 64 bit PCI slot.mjacob1999-02-091-59/+156
* roll internal release tagmjacob1999-02-094-10/+14
* Implement and use Fast Posting for both parallel && fibre. Redo a bit ofmjacob1999-01-307-205/+410
* Grrr.. Do the *correct* and *usable* 1.31 firmware. You have to powermjacob1999-01-301-1135/+3100
* roll internal release tagmjacob1999-01-301-2/+2
* roll internal release tagmjacob1999-01-301-2/+2
* Suggested by bde@freebsd.org- memcpy not necessarily good to use. D'oh- not inmjacob1999-01-103-13/+15
* Add some prototype deadchip detection. Set FIFO bursting (1XX0 only-mjacob1999-01-101-48/+88
* up isp_fifo_threshold NVRAM storage to 3 bits (for future 128 bit)mjacob1999-01-101-3/+3
* add MEMZERO portability definesmjacob1999-01-102-4/+8
* Amazingly stupid forgetfullness had me forgetting to turn on FIFO burstsmjacob1999-01-101-4/+4
* clarify headers;ansifymjacob1998-12-281-60/+22
* clarify headers;move uninit to outer layer;remove watchdogmjacob1998-12-289-136/+173
* probe function changed from returning char * to const char *.dillon1998-12-141-2/+2
* oops on lastmjacob1998-12-051-3/+3
* Remove the Target mode functions until they're in better shape. Implement somemjacob1998-12-051-91/+534
* make a real "done" func; clarify some LUN widthsmjacob1998-12-051-8/+51
* compilation fixes from Eklundmjacob1998-12-051-2/+3
* compilation fixes from Eklund && move XS_CMD_DONE to be a real functionmjacob1998-12-051-28/+5
* do a bit of cleanup on some target mode structures and clarify a couple other...mjacob1998-12-051-179/+428
* roll core version minor and wire a non-i386 default Loop ID to 113mjacob1998-12-051-3/+7
* offset was wrong for HARDLOOPID in NVRAMmjacob1998-12-051-2/+3
* Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control whichmjacob1998-12-051-9947/+12433
* roll to 1.31 levelmjacob1998-12-051-35/+1170
* trivial header fixmjacob1998-12-051-0/+5
* Examine all occurrences of sprintf(), strcat(), and str[n]cpy()archie1998-12-041-1/+1
* -Wunused cleanup.gibbs1998-10-151-1/+1
* Honor CAM_TAG_ACTION_NONE.gibbs1998-10-151-1/+2
OpenPOWER on IntegriCloud