summaryrefslogtreecommitdiffstats
path: root/sys/dev/bge
Commit message (Expand)AuthorAgeFilesLines
* - On entrance to the rx_eof sync RX rings maps with POSTWRITE flagstas2009-10-211-4/+7
* Immediately after clearing a pending callout that didn't make it duebz2009-10-131-10/+10
* - Give a name to the host coalescing bug fix WDMA mode register bit insteadstas2009-10-072-1/+2
* - Add support for new BGE chips (5761, 5784 and 57780). These chips uses newstas2009-10-072-74/+173
* - Do not try to reevaluate current RX production index on eachstas2009-08-181-7/+8
* Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/rwatson2009-06-261-2/+2
* Fix return values appropriately.attilio2009-05-301-2/+2
* s/rk_npkts/rx_npktsattilio2009-05-301-1/+1
* When user_frac in the polling subsystem is low it is going to busy theattilio2009-05-301-9/+13
* Some comment/space changes (FALLTHRU -> FALLTHROUGH, space after while).delphij2009-05-141-3/+3
* Try to workaround a race where bge_stop() may sneak in when bge_rxeof()delphij2009-05-141-0/+9
* - Ensure that INTx isn't disabled, as these chips apparently have amarius2009-03-232-4/+8
* - In bge_ifmedia_upd_locked() take advantrage of LIST_FOREACH().marius2009-03-212-23/+70
* Don't reset the PHY probe retry counter within the loop somarius2009-02-101-1/+1
* device_shutdown returns an int.imp2009-02-051-3/+4
* - Limit BCM5701 B5 to 32-bit mode as a workaround for a bug whichmarius2008-12-091-7/+12
* Do as the Linux tg3 driver does and enable MSI support alsomarius2008-10-271-6/+6
* Use bus_{read,write}_4(9) instead of bus_space_{read,write}_4(9)marius2008-10-142-10/+3
* - Don't read the identifier string from the VPD if there's no chipmarius2008-09-221-3/+4
* bge_tick(): do not touch PHY if link is up. This should solve problem witholeg2008-09-081-2/+6
* Improve the integration of BCM5906[M] support:marius2008-05-142-66/+63
* Use a better approach to force the interrupt which should work forbz2008-05-052-6/+25
* Use the correct bit when trying to force an interrupt through the HCC reg.bz2008-05-011-1/+1
* Add support for the BCM5906[M] adapters. These adapters only supportjhb2008-04-292-59/+337
* Remove some remnant alpha hacks.marius2008-04-261-1/+1
* - Use more appropriate maxsize, nsegments and maxsegsize parametersmarius2008-04-261-12/+6
* In some situations we were not clearing pending link state attentions.bz2008-04-081-0/+17
* Don't enable the workaround for the jitter bug on the 5722.jhb2008-03-111-3/+4
* Style tweak to the 5722 chipid to match the rest of this file.jhb2008-03-061-1/+1
* Flesh out support for the BCM5722 by recognizing the phy on the 5722 andjhb2008-03-062-0/+2
* Add a flag for Ethernet@WireSpeed capability and correct chip revisions.jkim2008-01-182-1/+11
* Fix mbuf pool watermark configuration (mismerged from OpenBSD in 1.132).jkim2008-01-181-1/+1
* Add support for the BMC5722.remko2007-12-252-0/+2
* Do not report MAC, TX, and RX stats via sysctl(8) with BCM5705+.jkim2007-11-161-7/+6
* Make the PCI code aware of PCI domains (aka PCI segments) so we canmarius2007-09-301-2/+3
* Despite several examples in the kernel, the third argument ofdwmalone2007-06-041-1/+1
* Add on/off controls for VLAN_MTU and VLAN_HWTAGGING to bge(4).yar2007-06-011-2/+41
* Remove an empty line.jkim2007-05-221-1/+0
* Remove BCM5704S specific tunable (hw.bge.fake_autoneg) andjkim2007-05-221-15/+13
* Rearrange DMA read/write control register settings based on document snippetjkim2007-05-222-46/+45
* Remove stale alpha support code.jkim2007-05-221-11/+0
* Fix time out check in EEPROM read and move delays to give some settle time.jkim2007-05-221-11/+12
* Add delays in MI communication register R/W loops.jkim2007-05-221-0/+2
* Reflect MFC of pci_find_extcap().jkim2007-05-011-1/+1
* - Add support/quirks for the on-board BGEs found in Sun Blade 1500marius2007-04-302-34/+98
* Enable MSI support on RELENG_6.jkim2007-04-021-3/+3
* Fix some OID names and minor style as per feedback from various people.scottl2007-03-131-16/+11
* Add MAC, RX, and TX stats reporting via sysctl.scottl2007-03-121-10/+147
* Add more chipset revision IDs.jkim2007-03-092-0/+5
* Use correct bits to stop firmware when ASF mode is enabled.jkim2007-03-081-2/+2
OpenPOWER on IntegriCloud