summaryrefslogtreecommitdiffstats
path: root/sys/dev/ath
Commit message (Expand)AuthorAgeFilesLines
* Call the WMAC DDR flush before handling an interrupt for theadrian2015-07-041-1/+9
* Wake up the hardware before doing anything in sysctl.adrian2015-07-041-48/+231
* Use device_printf() instead of if_printf(). No functional changes.glebius2015-05-295-80/+94
* Change three methods in struct ieee80211com, namely ic_updateslot,glebius2015-05-251-10/+9
* Set ic_softc in all 802.11 drivers. Not required right now, but will beglebius2015-05-251-0/+1
* Begin plumbing ieee80211_rx_stats through the receive path.adrian2015-05-253-4/+6
* Make net80211 drivers supply their device name to the net80211 layer, soglebius2015-05-251-0/+1
* CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than tenjkim2015-05-221-1/+1
* Return the correct HAL data type for HAL_DIAG_ANI_STATS.adrian2015-04-062-20/+10
* Use the HAL API for returning ar5212AniState, rather than just dumpingadrian2015-04-012-3/+24
* Start the process of migrating the ANI statistics out of the HALs and intoadrian2015-04-014-4/+48
* Move the HAL channel survey support out to be in the top-level HAL,adrian2015-03-298-30/+58
* Add a new field to HAL_ANISTATS - the extension channel busy count.adrian2015-03-291-0/+1
* Fix more ticks wrapping bugs exposed by the ticks wrapping bug check.adrian2015-03-291-3/+3
* Fix a long-standing bug with the early MAC address initialisation path,adrian2015-03-291-1/+5
* Update if_ath(4) to check for "hint.ath.X.macaddr" for an override MAC address.adrian2015-03-281-2/+58
* Lay some groundwork for having this stuff hang off of AHB rather thanadrian2015-03-021-3/+16
* Move the lock destruction/creation to earlier in the process - ifadrian2015-02-141-15/+20
* Cast everything to something longer than 32 bits so the sample maskadrian2015-01-281-1/+1
* Print out the final_rix if there's a problem.adrian2015-01-281-2/+2
* Add a new HAL capability - required to compile the updated AR9300adrian2015-01-281-1/+2
* Oops; correctly reload the CCA registers with the uncapped valueadrian2015-01-171-1/+2
* Until there's a full MCI implementation - just implement a placeholderadrian2015-01-171-0/+68
* Add bluetooth MCI coexistence HAL methods - used for AR9462 and AR9565 NICs.adrian2015-01-161-0/+12
* Check the right value correctly.adrian2015-01-161-1/+1
* Bump the valid GPIO range for rfkill up from 8 to 16.adrian2014-12-231-1/+9
* Fix the following -Werror warning from clang 3.5.0, while building thedim2014-11-231-1/+7
* Convert the callouts back to using mutexes.adrian2014-11-151-10/+4
* Migrate the callouts from using mutex locks to being mpsafe withadrian2014-11-141-9/+23
* Add a missing file from the last commit.adrian2014-09-301-0/+669
* Add initial support for the AR9485 CUS198 / CUS230 variants.adrian2014-09-3017-11/+232
* Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.adrian2014-09-203-83/+133
* Mechanically convert to if_inc_counter().glebius2014-09-183-10/+12
* Shut down RX before TX - in theory, this should make the chip less likelyadrian2014-08-232-9/+15
* Bump the HAL_REGRANGE fields from 16 bit to 32 bit.adrian2014-08-092-6/+7
* Add two new debug mark entries for chip power configuration.adrian2014-08-091-0/+3
* an isn't used, so eliminate it.imp2014-08-081-2/+0
* Remove ia64.marcel2014-07-072-4/+2
* Pull in r267961 and r267973 again. Fix for issues reported will follow.hselasky2014-06-283-10/+5
* Revert r267961, r267973:gjb2014-06-273-5/+10
* Extend the meaning of the CTLFLAG_TUN flag to automatically check ifhselasky2014-06-273-10/+5
* Add casts to have it compile on amd64 without complaining aboutadrian2014-05-071-6/+9
* There's no need to be this paranoid - ni is deferenced before thisadrian2014-05-071-1/+1
* Modify the RX path to keep the previous RX descriptor around once it'sadrian2014-05-063-17/+122
* Wake up the hardware before calling ath_mode_init() in the ioctl() path.adrian2014-05-051-0/+2
* Break out the multicast programming into its own hardware specificadrian2014-05-051-6/+30
* Quieten the RX/TX descriptor and FIFO setup debugging.adrian2014-05-052-14/+21
* Add Atheros AR1111 support to the HAL.adrian2014-05-051-0/+1
* Add tracking for self-generated frames when the VAP is in sleep state.adrian2014-05-023-11/+112
* * Modify the beacon interval in debugging to be ni_intval, not 102400adrian2014-04-301-13/+17
OpenPOWER on IntegriCloud