summaryrefslogtreecommitdiffstats
path: root/sys/dev/agp
Commit message (Expand)AuthorAgeFilesLines
* - Add few VIA bridges to agp_via.c and connect it to amd64 buildjkim2009-01-231-0/+9
* Add support for AMD64 Family 10h processors.jkim2009-01-121-3/+5
* Fix up handling of Intel G4X chips some more.rnoland2008-12-231-5/+12
* Clear busy state on the pages which are after the one that failed the bindkib2008-12-231-3/+5
* Deal with 0 length args...rnoland2008-12-211-1/+1
* Fix AGP_DEBUG macro to use c99 __VA_ARGS__ and build if enabled.rnoland2008-12-211-6/+3
* Correctly handle Intel g33 chips and add support for g45 chipsrnoland2008-10-022-19/+135
* Replace all calls to minor() with dev2unit().ed2008-09-271-1/+1
* When device_get_children returns an error, ignore that bus' children.imp2008-08-231-1/+2
* Enable the support for G33/Q35/Q33 now that both the G33 and Q35 have beenjhb2008-08-011-2/+0
* Fix PCI id for 945GME Express Integrated Graphics Controller:gonzo2008-06-201-1/+1
* Add resume support to the agp_i810 family.remko2008-03-121-0/+17
* Calculate the number of pages the GATT spans when reading from each pagejhb2008-03-071-3/+4
* Add the 845M GMCH controller.remko2007-11-261-0/+2
* Move the agp(4) driver from sys/pci to sys/dev/agp. __FreeBSD_version wasjhb2007-11-1213-25/+25
* Split agp_generic_detach() up into two routines: agp_free_cdev() destroysjhb2007-10-3011-38/+39
* - Add the device ID for the VIA VT3324 (CX700) chipset.kevlo2007-09-211-21/+83
* Add the PCI id for the Intel 7221's integrated graphics controller. It isalc2007-09-151-0/+2
* Add support for G965/Q965/GM965/GME965/GME945 AGP.anholt2007-07-134-230/+387
* Restore agp aperture size after resume, in case it is modified after boot.takawata2007-01-061-1/+8
* - Clean up Aperture Access Global Enable (APEN) bit access.jkim2007-01-052-50/+41
* Fix style(9).jkim2007-01-051-61/+52
* Make agp_intel capable to work after resume from S3 state.takawata2007-01-051-33/+50
* The page queues lock is no longer required by vm_page_busy() oralc2006-10-221-4/+0
* Fix the wraparound of memsize >=2GB.tanimura2006-10-151-2/+3
* Fix style(9) nits.jkim2006-10-091-38/+37
* Fix 32-bit PTE in the GART table.jkim2006-10-091-1/+3
* Add support for 945G/GM AGP chipsets.anholt2006-09-271-13/+29
* Add support for another ATI IGP 340M (RS200M) AGP bridge.anholt2006-09-011-1/+4
* Use aperture base address from north bridge. Some BIOS does not encodejkim2006-08-211-10/+5
* Explicitly set v3 mode only when it is requested. Don't bother otherwise.jkim2006-08-111-1/+6
* Fix breakage of CHIP_I855 in the last revision.anholt2006-06-271-3/+4
* Replace the three copies of the list of pci ids with a single centralized list.anholt2006-06-251-143/+122
* Move SiS 760 to where it belongs.jkim2006-05-302-2/+2
* Add support for allocating one larger than page-sized contiguous block of memoryanholt2006-05-161-26/+110
* Remove various bits of conditional Alpha code and fixup a few comments.jhb2006-05-121-10/+0
* Add support for the Intel E7205 chipset.anholt2006-02-171-0/+6
* Don't add an agp child in vgapci's attach routine if the PCIY_AGPjhb2006-02-011-0/+10
* Fix a memory leak I introduced with the hostb/vgapci stuff.jhb2006-01-171-4/+8
* - Use PCIR_BAR() macro for the BAR for the aperture.jhb2005-12-201-7/+1
* - Bump FreeBSD version for the hostb(4) and vgapci(4) drivers as well asjhb2005-12-201-36/+4
* Change the various AGP drivers that attach to the Host-PCI bridge device tojhb2005-12-208-16/+8
* Change the agp_find_device() to return the first agp device that has beenjhb2005-12-201-2/+11
* Don't map the AGP aperture into contiguous KVA. The various graphicsjhb2005-12-202-4/+1
* Destroy the /dev device before destroying the mutex or releasing resourcesjhb2005-12-201-1/+2
* Use pci_find_extcap() to search for AGP capabilities (PCIY_AGP).jhb2005-12-201-25/+4
* Add support for i915 GMCH AGP. This diff is a combination of work by myselfanholt2005-12-022-31/+160
* Add support for the i855GM, tested by an r300 user.anholt2005-11-291-1/+6
* 0xb1881106 seems to be an AGP bridge and some BIOSes incorrectly handlejkim2005-11-141-16/+72
* - Add a work-around for nForce3-250. Aperture base address encoded in misc.jkim2005-09-272-8/+175
OpenPOWER on IntegriCloud