summaryrefslogtreecommitdiffstats
path: root/share/man/man4/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* After much delay and anticipation, welcome RAIDFrame into the FreeBSDscottl2002-10-201-0/+1
| | | | | | world. This should be considered highly experimental. Approved-by: re
* Add the manual page which explains how gbde works and which bits it isphk2002-10-191-0/+1
| | | | | | composed off. Sponsored by: DARPA & NAI Labs.
* manual pages for the new kernel crypto support (need work)sam2002-10-041-0/+3
| | | | Obtained from: openbsd
* Add manpage for the pst driver (Promise SX6000)sos2002-09-271-0/+1
|
* Connect gre(4) to the build.sobomax2002-09-061-0/+1
|
* Add a manual page for the ahd driver.scottl2002-09-011-0/+1
|
* Man page for new L2TP netgraph node type.archie2002-08-201-0/+1
| | | | Obtained from: Packet Design
* Attach uvisor(4) to the build.trhodes2002-08-131-0/+1
|
* Add the uftdi ucom driver which supports the following adapters:joe2002-08-111-0/+1
| | | | | | | | | Inland UAS111 QVS USC-1000 HP USB-Serial adapter shipped with some HP laptops Submitted by: takawata MFC After: 7 days
* Preliminary NEWCARD docs.imp2002-07-091-0/+3
|
* Finish the repo copy of pcic.4 -> oldcard.4. oldcard.4 will documentimp2002-07-091-0/+1
| | | | | the legacy pccard mode stuff called 'oldcard.' pcic.4 will be hijacked for newcard purposes.
* Add a simple manpage for the discard interface derived from lo(4).brooks2002-05-291-0/+1
|
* Add a manual page for the spic(4) device driver and hook it in the build.will2002-05-201-0/+1
| | | | Reviewed by: ru
* Merge bsd.obj.mk's version of the _SUBDIR target with bsd.subdir.mk.ru2002-04-231-3/+0
| | | | | | | | | | | | | | | | Ensure all standard targets honor SUBDIR. Now `make obj' descends into SUBDIRs even if NOOBJ is set (some descendants may still need an object directory, but we do not have such precedents). Now `make install' in non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install' in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong order anyway. Fixed `distribute' targets (except for the bsd.subdir.mk version) so that they do not depend on _SUBDIR; `distribute' calls `install' which already depends on _SUBDIR. De-standardize `maninstall', otherwise manpages would be installed twice. (To be revised later.)
* Add the previously committed usb(4) manual pages to the build.trhodes2002-04-191-0/+7
| | | | | PR: 27919 MFC after: 3 days
* Slight correction to ng_etf man page and add it to the listjulian2002-04-091-0/+1
| | | | of man pages to install.
* First cut at a geom(4) manpage.phk2002-03-271-0/+1
| | | | | The mdoc markup and all spelling errors in this file are all legal game for anyone with more doc-clue than me.
* Link scbus(4) to scsi(4). Most of the other CAM devices have theirdd2002-03-101-0/+1
| | | | | | | | own manual pages, but this is better than nothing until someone writes a real scbus(4). PR: 35641 Submitted by: Gary W. Swearingen <swear@blarg.net>
* Add the puc (PCI "Universal" Communications) driver. The idea and some ofjhay2002-02-161-0/+1
| | | | | | | | | | | | | the structure definitions come from NetBSD to make it easier to share card definitions. The driver only acts as a shim between the pci bus and the sio driver. Later pci parallel ports could also be supported through this driver. Support for most single and multiport pci serial cards should be as simple as adding its definition to pucdata.c Tested with the following pci cards: Moxa Industio CP-114, 4 port RS-232,RS-422/485 Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports Netmos NM9835 PCI-2S-550, 2 port RS-232
* new entry for polling manpageluigi2002-02-151-0/+1
| | | | (wonder why the process cannot be made automatic...)
* yp(4) -> yp(8).ru2002-01-141-2/+0
| | | | PR: docs/30797
* Link loop(4) to lo(4). The device's name is 'loop', which is what onedd2002-01-071-0/+1
| | | | | | | | (at least a new one) would expect the manual page to be called (even if the device is lo#). PR: 32453 Submitted by: Gary W. Swearingen <swear@blarg.net>
* Move UFS and FFS docs to section 7.chris2001-12-281-2/+0
| | | | | Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
* Document UFS and FFS options and features.chris2001-12-271-0/+2
| | | | | Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
* Adding man page for the em driver.pdeuskar2001-12-021-0/+1
| | | | | | Submitted by:Prafulla Deuskar Reviewed by:Paul Saab MFC after:1 week
* Add an initial lomac(4) manpage.green2001-11-201-0/+1
| | | | Sponsored by: DARPA, NAI Labs (CBOSS project)
* Bring in the ugen manual page from NetBSD.joe2001-11-201-0/+1
|
* Remove wx.mjacob2001-10-201-1/+0
|
* Add manpage for gx driver.jlemon2001-10-191-0/+1
|
* Add a manual page for the Maestro3 sound driver. This documents it'sscottl2001-10-151-0/+1
| | | | | | special nature under the GPL and a boot hint that can affect operation. MFC after: 3 days
* Move the agp(4) page from the i386 directoryyar2001-10-051-1/+3
| | | | | to the machine-independent directory since AGP is used on other architectures as well.
* Add device driver support for the Broadcom BCM570x family of gigabitwpaul2001-09-271-0/+1
| | | | | | | | | | | | | | ethernet controllers. This adds support for the 3Com 3c996-T, the SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on Dell PowerEdge 2550 servers. The latter configuration hauls ass: preliminary measurements show TCP speeds of over 900Mbps using only normal size frames. TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping are supported, as well as interrupt moderation. Still need to fix autonegotiation support for 1000baseSX NICs, but beyond that, driver is pretty solid.
* Add ng_ip_input. A new netgraph node for queuing IP packets into thebrooks2001-09-271-0/+1
| | | | main IP input processing code.
* /home/brooks/ng_gif.messagebrooks2001-09-261-0/+1
|
* Add a manpage for the Comtrol RocketPort Intelligent Serial Port Cardobrien2001-09-051-0/+1
| | | | | | | driver. MdocNging by: ru Obtained from: BSD/OS
* Add new, simple pcic manual page.imp2001-08-211-0/+1
|
* Finally add the manpage for the IEEE 802.1Q VLANyar2001-07-281-0/+1
| | | | network interface.
* You were knocked senseless by the Boomerang, spun around by the Cyclone,wpaul2001-07-231-0/+1
| | | | | | | | | | | | | | | | | | blown over by the Hurricane and had a house dropped on you by the Tornado. Now it's time to have your parade rained on by... the Typhoon! This commit adds driver support for 3Com 3cR990 10/100 ethernet adapters based on the Typhoon I and Typhoon II chipsets. This is actually a port of the OpenBSD driver with many hacks by me. No Virginia, there isn't any support for the hardware crypto yet. However there is support for TCP/IP checksum offload and VLANs. Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for squeezing enough info out of 3Com to get this written, and for doing most of the hard work. Manual page is included. Compiled as a module and included in GENERIC.
* Removed whitespace at end-of-line; no content changes. I simply didschweikh2001-07-141-1/+1
| | | | | | | | | | cd src/share; find man[1-9] -type f|xargs perl -pi -e 's/[ \t]+$//' BTW, what editors are the culprits? I'm using vim and it shows me whitespace at EOL in troff files with a thick blue block... Reviewed by: Silence from cvs diff -b MFC after: 7 days
* Turn on nullmodem (nmdm(4)) man page.julian2001-07-081-0/+1
|
* Add a manpage for the acpi super-device. This is still fairly brief, andmsmith2001-07-031-0/+1
| | | | will need to be fleshed out as the system's design solidifies.
* Add awi.4onoe2001-06-261-0/+1
|
* Man page for orm driver.imp2001-06-011-0/+1
| | | | | PR: 22078 Submitted by: Nikolai Saoukh <nms@otdel-1.org>
* Add device driver support for the Level 1 LXT1001 NetCelleratorwpaul2001-05-311-0/+1
| | | | | | | | | | | | | | | gigabit ethernet controller chip. This device is used on some fiber optic gigE cards from SMC, D-Link and Addtron. Jumbograms and TCP/IP checksum offload on receive are supported. Hardware VLAN filtering is not, because it doesn't play well with our existing VLAN code. Also add manual page. There is a 4.x version of this driver available at http://www.freebsd.org/~wpaul/Level1/4.x if anyone feels adventurous and wants to test it. I still need to do performance testing and tuning with this device. (For my next trick, I will make the 3Com 3cR990 sit up and beg.)
* Currently, each wireless networking driver has it's own control programphk2001-05-261-0/+1
| | | | | | | | | | | | despite the fact that most people want to set exactly the same settings regardless of which card they have. It has been repeatidly suggested that this configuration should be done via ifconfig. This patch implements the required functionality in ifconfig and add support to the wi and an drivers. It also provides partial, untested support for the awi driver. PR: 25577 Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
* Add support for gigabit ethernet cards based on the NatSemi DP83820wpaul2001-05-111-0/+1
| | | | | | | | | | | | | | | | | | | and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000 copper PHY. There are a whole bunch of very low cost cards available with this chipset selling for $150USD or less. This includes the SMC9462TX, D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards from Addtron. This chip supports TCP/IP checksum offload, VLAN tagging/insertion. 2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs. I have not done serious performance testing with this driver. I know it works, and I want it under CVS control so I can keep tabs on it. Note that there's no serious mutex stuff in here yet either: I need to talk more with jhb to figure out the right way to do this. That said, I don't think there will be any problems. This driver should also work on the alpha. It's not turned on in GENERIC.
* Add a simple manpage describing the basic functionality of witness.jhb2001-03-281-0/+1
| | | | It needs a diagonistics section added at some point in the future.
* MAN[1-9] -> MAN.ru2001-03-271-1/+1
|
* Make md(4) and mdconfig(8) take over the role of vn(4) and vnconfig(8)phk2001-03-091-2/+2
| | | | | | | entirely as previously advertised. md(4) adopted all assets of vn(4) some time back and has proper devfs support and cloning abilities to boot.
* Document how to compile KTR into the kernel, tweak its behavior, andjhb2001-03-091-0/+1
| | | | examine the event logs in ddb(4).
OpenPOWER on IntegriCloud