summaryrefslogtreecommitdiffstats
path: root/lib
Commit message (Collapse)AuthorAgeFilesLines
* MFC r289790: dpv(3) merged to stable/10 before release/10.2.0dteske2015-11-021-1/+1
|
* MFC r289793: Bump date/copyright after correcting HISTORYdteske2015-11-021-2/+2
|
* MFC r289794: figpar(3) merged to stable/10 before release/10.2.0dteske2015-11-021-3/+3
|
* MFC r287453,287454,288143:delphij2015-10-291-3/+3
| | | | | | file 5.25. Relnotes: yes
* Disable SSE in libthrvangyzen2015-10-262-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clang emits SSE instructions on amd64 in the common path of pthread_mutex_unlock. If the thread does not otherwise use SSE, this usage incurs a context-switch of the FPU/SSE state, which reduces the performance of multiple real-world applications by a non-trivial amount (3-5% in one application). Instead of this change, I experimented with eagerly switching the FPU state at context-switch time. This did not help. Most of the cost seems to be in the read/write of memory--as kib@ stated--and not in the #NM handling. I tested on machines with and without XSAVEOPT. One counter-argument to this change is that most applications already use SIMD, and the number of applications and amount of SIMD usage are only increasing. This is absolutely true. I agree that--in general and in principle--this change is in the wrong direction. However, there are applications that do not use enough SSE to offset the extra context-switch cost. SSE does not provide a clear benefit in the current libthr code with the current compiler, but it does provide a clear loss in some cases. Therefore, disabling SSE in libthr is a non-loss for most, and a gain for some. I refrained from disabling SSE in libc--as was suggested--because I can't make the above argument for libc. It provides a wide variety of code; each case should be analyzed separately. https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html Suggestions from: dim, jmg, rpaulo Sponsored by: Dell Inc.
* MFC r289450:ngie2015-10-261-1/+3
| | | | | | | | | | Set dev->fd to -1 when calling cam_close_spec_device with a valid dev->fd descriptor to avoid trashing valid file descriptors that access dev->fd at a later point in time PR: 192671 Submitted by: Scott Ferris <scott.ferris@isilon.com> Sponsored by: EMC / Isilon Storage Division
* MFC r288309: fnmatch(): Remove exponential behaviour as in sh r229201.jilles2015-10-251-28/+49
| | | | | | The old code was exponential in the number of asterisks in the pattern. However, once a match has been found upto the next asterisk, the previous asterisks are no longer relevant.
* MFC r288430: wordexp: Rewrite to make WRDE_NOCMD reliable.jilles2015-10-252-93/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Shell syntax is too complicated to detect command substitution and unquoted operators reliably without implementing much of sh's parser. Therefore, have sh do this detection. While changing sh's support anyway, also read input from a pipe instead of arguments to avoid {ARG_MAX} limits and improve privacy, and output count and length using 16 instead of 8 digits. The basic concept is: execl("/bin/sh", "sh", "-c", "freebsd_wordexp ${1:+\"$1\"} -f "$2", "", flags & WRDE_NOCMD ? "-p" : "", <pipe with words>); The WRDE_BADCHAR error is still implemented in libc. POSIX requires us to fail strings containing unquoted braces with code WRDE_BADCHAR. Since this is normally not a syntax error in sh, there is still a need for checking code in libc, we_check(). The new we_check() is an optimistic check that all the characters <newline> | & ; < > ( ) { } are quoted. To avoid duplicating too much sh logic, such characters are permitted when quoting characters are seen, even if the quoting characters may themselves be quoted. This code reports all WRDE_BADCHAR errors; bad characters that get past it and are a syntax error in sh return WRDE_SYNTAX. Although many implementations of WRDE_NOCMD erroneously allow some command substitutions (and ours even documented this), there appears to be code that relies on its security (codesearch.debian.net shows quite a few uses). Passing untrusted data to wordexp() still exposes a denial of service possibility and a fairly large attack surface. This is also a MFC of r286830 to reduce conflicts. I changed the code somewhat to avoid changes from r286941; in particular, WRDE_BADVAL can still only be returned if WRDE_UNDEF was passed. Relnotes: yes Security: fixes command execution with wordexp(untrusted, WRDE_NOCMD)
* MFC 287386,288949,288993:jhb2015-10-231-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Export current system call code and argument count for system call entry and exit events. To preserve the ABI, the new fields are moved to the end of struct thread in these branches (unlike HEAD) and explicitly copied when new threads are created. In addition, the new tests are only added in 10. r287386: Export current system call code and argument count for system call entry and exit events. procfs stop events for system call tracing report these values (argument count for system call entry and code for system call exit), but ptrace() does not provide this information. (Note that while the system call code can be determined in an ABI-specific manner during system call entry, it is not generally available during system call exit.) The values are exported via new fields at the end of struct ptrace_lwpinfo available via PT_LWPINFO. r288949: Fix various edge cases related to system call tracing. - Always set td_dbg_sc_* when P_TRACED is set on system call entry even if the debugger is not tracing system call entries. This ensures the fields are valid when reporting other stops that occur at system call boundaries such as for PT_FOLLOW_FORKS or when only tracing system call exits. - Set TDB_SCX when reporting the stop for a new child process in fork_return(). This causes the event to be reported as a system call exit. - Report a system call exit event in fork_return() for new threads in a traced process. - Copy td_dbg_sc_* to new threads instead of zeroing. This ensures that td_dbg_sc_code in particular will report the system call that created the new thread or process when it reports a system call exit event in fork_return(). - Add new ptrace tests to verify that new child processes and threads report system call exit events with a valid pl_syscall_code via PT_LWPINFO. r288993: Document the recently added pl_syscall_* fields in struct ptrace_lwpinfo.
* MFC 288833:jgh2015-10-141-7/+6
| | | | | | | | | PR: 203440 (based on) Submitted by: ceratv@rpi.edu Approved by: wblock@ (mentor) Differential Revision: https://reviews.freebsd.org/D3813 - address grammar
* MFC r288953:dim2015-10-091-1/+0
| | | | Stop linking libc++.so verbosely, there is no need to.
* Partially revert r288607, stable/10 does not use ncurses_dll.h.in like headbdrewery2015-10-031-1/+0
| | | | does, so this file should not be in CLEANFILES / .NOPATH.
* MFC r273756,r287980:bdrewery2015-10-032-11/+7
| | | | | | | r273756: only install .pc files when we are not installing 32bit compat libs... r287980: Replace beforeinstall: handling with FILES.
* MFC r288199,r288246:bdrewery2015-10-033-1/+4
| | | | Add missing CLEANFILES.
* MFC 286177:jhb2015-10-011-3/+3
| | | | Fix a couple of markup typos.
* MFC 283624,283630:jhb2015-10-014-2/+174
| | | | | | Export a list of VM objects in the system via a sysctl. The list can be examined via 'vmstat -o'. It can be used to determine which files are using physical pages of memory and how much each is using.
* MFC r288092:bdrewery2015-09-291-2/+0
| | | | | Avoid adding duplicates into OBJS. bsd.lib.mk already handles adding entries to OBJS based on SRCS.
* MFC r285428alc2015-09-271-4/+4
| | | | Correct the description of MADV_DONTNEED.
* MFC r287541:dim2015-09-221-1/+1
| | | | | | | | In libz's inflateMark(), avoid left-shifting a negative integer, which is undefined. Reviewed by: delphij Differential Revision: https://reviews.freebsd.org/D3344
* Long overdue MFC r284377:jlh2015-09-221-8/+5
| | | | | | | | | | | | | NetBSD commit log: Use a constant array for the MIB. Newer LLVM decided that mib[] warranted stack protections, with the obvious crash after the setup was done. As a positive side effect, code size shrinks a bit. I'm not sure why this hasn't bitten us yes, but it is certainly possible and there are no real drawbacks to this change anyway. Submitted by: pfg Obtained from: NetBSD
* MFC r287247: Plug memory leaks when running out of memory.delphij2015-09-141-1/+3
| | | | Reported by: clang scan-build
* MFC 287349,287404:hrs2015-09-131-7/+15
| | | | | | | | | - Print sdl->sdl_data when sdl->sdl_nlen > 0 && sdl->sdl_alen == 0 as link_ntoa(3) does. - snprintf() returns at most size-1 of the chars printed into the buffer. (n == hostlen) also means the buffer length was too short.
* MFC 287595:hrs2015-09-131-12/+8
| | | | | | | - Fix SIGSEGV when sa == NULL. NULL check in getnameinfo_inet() did not work as expected. - Simplify afdl table lookup.
* MFC r287360:kib2015-09-081-1/+1
| | | | | Fix t_spawnattr test for attributes handling by posix_spawn(3). Connect it to the build.
* MFC r287093:delphij2015-09-081-1/+1
| | | | | | | Instead of doing an no-op (|= 0), actually clear the flags in acl_clear_flags_np. Reported by: Pascal Drecker <pascal freebsd drecker com>
* MFC r287292:kib2015-09-0522-121/+104
| | | | | | | | | | Switch libc from using _sig{procmask,action,suspend} symbols, which are aliases for the syscall stubs and are plt-interposed, to the libc-private aliases of internally interposed sigprocmask() etc. MFC r287300: Use libthr interposed functions instead of syscalls, in posix_spawn()' child.
* MFC 283622:jhb2015-09-034-4/+8
| | | | | Add <sys/user.h> to the SYNOPSIS of the kinfo_get*() functions since these functions all return types that are defined in that header.
* MFC: r286490,r286491,r287125bapt2015-09-021-16/+6
| | | | | | | | | Per rfc3629 value greater than 0x10ffff should be rejected (r286490,r286491) Make UTF-8 parsing and generation more strict. (r287125 by ed) - in mbrtowc() we need to disallow codepoints above 0x10ffff. - In wcrtomb() we need to disallow codepoints between 0xd800 and 0xdfff.
* MFC r286910:delphij2015-09-011-10/+5
| | | | | | | | - ANSIfy - Remove the redundant _PATH_RSH definition (paths.h at r96194); - Use pid_t for PIDs - Note that we are at the same level of OpenBSD's counterpart of revision 1.7 (r94757).
* MFC r279084,280713: setmode(): Use sysctl kern.proc.umask instead of umask()jilles2015-08-291-9/+33
| | | | | | | | | if possible. The kern.proc.umask.<pid> sysctl allows querying the umask without temporarily modifying it. r280713 is the actual change, while r279084 is a whitespace change.
* MFC r286975:kib2015-08-271-2/+6
| | | | Remove the wrong asserts.
* MFC r286582:kib2015-08-172-1/+9
| | | | Pre-resolve symbols required for the deferred signal processing.
* MFC r286719: Revert part of r280687, reporting "1" (true) for empty value.mav2015-08-161-1/+1
| | | | For example, it made gpart partitions without label report "1" as label.
* MFC r286515:dim2015-08-121-2/+2
| | | | | | | In libm's exp2(3), avoid left-shifting a negative integer, which is undefined. Replace it with the intended value, in a defined way. Reviewed by: bde
* MFC r284649: fts_children: preserve errno after running close/fchdirjilles2015-08-091-5/+8
| | | | | PR: 200942 Submitted by: Conrad Meyer
* MFC r285720:pfg2015-08-051-5/+3
| | | | | | | | | | | | libusb: Fix minor warning. Fix a warning triggered by the gcc + FORTIFY_SOURCE patches: In function 'libusb20_parse_config_desc': lib/libusb/libusb20_desc.c:141: warning: passing argument 1 of 'memcpy' discards qualifiers from pointer target type Submitted by: hselansky
* Implement x86 ptrace(2) requests PT_{GET,SET}{FS,GS}BASE.kib2015-08-051-2/+189
| | | | | | | | | | | | | | | | | | | | | | MFC r284918: Add helper fill_based_sd(9). MFC r284919: Add x86 PT_GETFSBASE, PT_GETGSBASE machine-depended ptrace requests to obtain the thread %fs and %gs bases. Add x86 PT_SETFSBASE and PT_SETGSBASE requests to set the bases from debuggers. The set requests, similarly to the sysarch({I386,AMD64}_SET_FSBASE), override the corresponding segment registers. MFC r284965: Document x86 machine-specific ptrace(2) requests. MFC r285011: Disallow a debugger on 64bit system to set fs/gs bases of the 32bit process beyond the end of the process address space. MFC r285104: Grammar and language fixes.
* MFC r285873:trasz2015-08-022-24/+2
| | | | | | | Update Capsicum and Mandatory Access Control manual pages to no longer claim they are experimental. Sponsored by: The FreeBSD Foundation
* MFC r285251:trasz2015-08-021-3/+3
| | | | | | Fix markup. Sponsored by: The FreeBSD Foundation
* MFC r285972:bdrewery2015-07-301-0/+1
| | | | | | | | | | | MFV r285970: Apply upstream changeset bf4f6ec64e: Fix issue 356: properly skip a sparse file entry in a tar file. PR: 201506 Relnotes: yes
* MFC r285188:pkelsey2015-07-151-2/+14
| | | | | | | | Fix sysctl(3) so it returns the intended values for all mib names in the 'user' sysctl tree, which have all been coming back 0 or empty since r240176. Approved by: re
* MFH (r275020): partial fix for getgrouplist() in group_compat casedes2015-07-091-9/+16
| | | | | PR: 190055 Approved by: re (marius)
* MFC: libsm/path.c is about to disappear in the merge of sendmail 8.15.2. Itgshapiro2015-07-091-1/+1
| | | | | | is an empty file now so it is safe to remove before the merge. Approved by: re (gjb)
* MFH (r276605, r282089): upgrade to latest Unbounddes2015-07-061-3/+3
| | | | | | | | | | | | | | MFH (r276699, r276702, r277057): local control socket MFH (r276599, r276612, r282087, r282088): build fixes This brings in Unbound 1.5.3 from head. Local control sockets are now supported and will be used by default for new installations. Existing systems will continue to use TCP control sockets until the automated setup script is re-run ("service local_unbound setup") and the service restarted ("service local_unbound restart"). Approved by: re (kib) Relnotes: yes
* MFC r285050, r285053, r285059:garga2015-07-063-5/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When passwd or group information is changed (by pw, vipw, chpass, ...) temporary file is created and then a rename() call move it to official file. This operation didn't have any check to make sure data was written to disk and if a power cycle happens system could end up with a 0 length passwd or group database. There is a pfSense bug with more information about it: https://redmine.pfsense.org/issues/4523 The following changes were made to protect passwd and group operations: * lib/libutil/gr_util.c: - Replace mkstemp() by mkostemp() with O_SYNC flag to create temp file - After rename(), fsync() call on directory for faster result * lib/libutil/pw_util.c - Replace mkstemp() by mkostemp() with O_SYNC flag to create temp file * usr.sbin/pwd_mkdb/pwd_mkdb.c - Added O_SYNC flag on dbopen() calls - After rename(), fsync() call on directory for faster result * lib/libutil/pw_util.3 - pw_lock() returns a file descriptor to master password file on success Differential Revision: https://reviews.freebsd.org/D2978 Approved by: re (kib), bapt (implicit agreed) Sponsored by: Netgate
* MFC r284732:dim2015-07-031-1/+5
| | | | | | | | | | | | | | Add __cxa_deleted_virtual to libcxxrt's version map. This symbol can sometimes be emitted by clang++, and was not yet exported from libcxxrt. Attempt to be compatible with libsupc++ by using the same CXXABI_1.3.6 symbol version. Approved by: re (kib) Reported by: yuri@rawbw.com PR: 200863 Reviewed by: emaste Differential Revision: https://reviews.freebsd.org/D2850
* MFC r282209:neel2015-06-282-26/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emulate the 'bit test' instruction. MFC r282259: Re-implement RTC current time calculation to eliminate the possibility of losing time. MFC r282281: Advertise the MTRR feature via CPUID and emulate the minimal set of MTRR MSRs. MFC r282284: When an instruction cannot be decoded just return to userspace so bhyve(8) can dump the instruction bytes. MFC r282287: Don't require <sys/cpuset.h> to be always included before <machine/vmm.h>. MFC r282296: Emulate MSR_SYSCFG which is accessed by Linux on AMD cpus when MTRRs are enabled. MFC r282301: Relax limits when transitioning a vector from the IRR to the ISR and also when extinguishing it from the ISR in response to an EOI. MFC r282335: Advertise an additional memory BAR in the "dummy" device emulation. MFC r282336: Emulate machine check related MSRs to allow guest OSes like Windows to boot. MFC r282351: Don't advertise the Intel SMX capability to the guest. MFC r282407: Emulate the 'CMP r/m8, imm8' instruction. MFC r282519: Add macros for AMD-specific bits in MSR_EFER: LMSLE, FFXSR and TCE. MFC r282520: Emulate guest writes to EFER_MSR properly. MFC r282558: Deprecate the 3-way return values from vm_gla2gpa() and vm_copy_setup(). MFC r282571: Check 'td_owepreempt' and yield the vcpu thread if it is set. MFC r282595: Allow byte reads of AHCI registers. MFC r282784: Handling indirect descriptors is a capability of the host and not one that needs to be negotiated. Use the host capabilities field and not the negotiated field when verifying that indirect descriptors are supported. MFC r282788: Allow configuration of the sector size advertised to the guest. MFC r282865: Set the subvendor field in config space to the vendor ID. This is required by the Windows virtio drivers to correctly match a device. MFC r282922: Bump the size of the blockif scatter-gather list to 67. MFC r283075: Fix off-by-one in array index bounds check. bhyveload would allow you to create 33 entries on an array that only has 32 slots MFC r283168: Temporarily revert r282922 which bumped the max descriptors. MFC r283255: Emulate the "CMP r/m, reg" instruction (opcode 39H). MFC r283256: Add an option "--get-vmcs-exit-inst-length" to display the instruction length of the instruction that caused the VM-exit. MFC r283264: Change the header type of the emulated host-bridge from type 1 to type 0. MFC r283293: Don't rely on the 'VM-exit instruction length' field in the VMCS to always have an accurate length on an EPT violation. MFC r283299: Remove bogus verification of instruction length after instruction decode. MFC r283308: Exceptions don't deliver an error code in real mode. MFC r283657: Fix non-deterministic delays when accessing a vcpu that was in "running" or "sleeping" state. MFC r283973: Use tunable 'hw.vmm.svm.features' to disable specific SVM features even though they might be available in hardware. Use tunable 'hw.vmm.svm.num_asids' to limit the number of ASIDs used by the hypervisor. MFC r284046: Fix regression in 'verify_gla()' with the RIP-relative addressing mode. MFC r284174: Support guest writes to the TSC by enabling the "use TSC offsetting" execution control.
* MFC r279444:neel2015-06-282-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow passthrough devices to be hinted. MFC r279683: When ICW1 is issued the edge sense circuit is reset which means that following an initialization a low-to-high transistion is necesary to generate an interrupt. MFC r279925: Add -p parameter to list PCI device to pass through to the guest. MFC r281559: Fix handling of BUS_PROBE_NOWILDCARD in 'device_probe_child()'. MFC r280447: When fetching an instruction in non-64bit mode, consider the value of the code segment base address. MFC r280725: Move legacy interrupt allocation for virtio devices to common code. MFC r280775: Fix the RTC device model to operate correctly in 12-hour mode. MFC r280929: Fix "MOVS" instruction memory to MMIO emulation. MFC r280968: Display instruction bytes and %rip prior to aborting due to an instruction emulation error. MFC r281145: Enhance the support for Group 1 Extended opcodes for CMP, AND, OR instructions. MFC r281542: Initialize 'error' before use (Coverity IDs 1249748, 1249747, 1249751, 1249749) MFC r281561: Prior to aborting due to an ioport error, it is always interesting to see what the guest's %rip is. MFC r281611: If the number of guest vcpus is less than '1' then flag it as an error. MFC r281612: Prefer 'vcpu_should_yield()' over checking 'curthread->td_flags' directly. MFC r281630: Relax the check on which vectors can be delivered through the APIC. According to the Intel SDM vectors 16 through 255 are allowed to be delivered via the local APIC. MFC r281879: Missing break in switch case (Coverity ID 1292499) MFC r281946: Don't allow guest to modify readonly bits in the PCI config 'status' register. MFC r281987: STOS/STOSB/STOSW/STOSD/STOSQ instruction emulation. MFC r282206: Implement the century byte in the RTC.
* MFC r276428:neel2015-06-272-33/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko. MFC r276432: Initialize all fields of 'struct vm_exception exception' before passing it to vm_inject_exception(). MFC r276763: Clear blocking due to STI or MOV SS in the hypervisor when an instruction is emulated or when the vcpu incurs an exception. MFC r277149: Clean up usage of 'struct vm_exception' to only to communicate information from userspace to vmm.ko when injecting an exception. MFC r277168: Fix typo (missing comma). MFC r277309: Make the error message explicit instead of just printing the usage if the virtual machine name is not specified. MFC r277310: Simplify instruction restart logic in bhyve. MFC r277359: Fix a bug in libvmmapi 'vm_copy_setup()' where it would return success even if the 'gpa' was in the guest MMIO region. MFC r277360: MOVS instruction emulation. MFC r277626: Add macro to identify AVIC capability (advanced virtual interrupt controller) in AMD processors. MFC r279220: Don't close a block context if it couldn't be opened avoiding a null deref. MFC r279225: Add "-u" option to bhyve(8) to indicate that the RTC should maintain UTC time. MFC r279227: Emulate MSR 0xC0011024 when running on AMD processors. MFC r279228: Always emulate MSR_PAT on Intel processors and don't rely on PAT save/restore capability of VT-x. This lets bhyve run nested in older VMware versions that don't support the PAT save/restore capability. MFC r279540: Fix warnings/errors when building vmm.ko with gcc.
* MFC r271651, r271719, r272138, r272457, r272845, r275476, r275518, r275614,tijl2015-06-2543-511/+1297
| | | | | | | | r275819, r276176, r278154, r278160, r278339, r279127, r279240, r279491, r279493, r279856, r283032, r284423, r284426, r284427, r284428 Merge changes to libm from the past 9 months. This includes improvements to the Bessel functions and adds the C99 function lgammal.
OpenPOWER on IntegriCloud