summaryrefslogtreecommitdiffstats
path: root/lib/libpthread/thread/thr_private.h
Commit message (Collapse)AuthorAgeFilesLines
* Limit threads clock resolution to no less than 1000usec (1000Hz).deischen2001-02-261-0/+1
| | | | | PR: 25300 Submitted by: Tom Pavel <pavel@alum.mit.edu> (in part)
* Remove (int) file descriptor locking. It should be up to thedeischen2001-02-111-2/+1
| | | | | | | | | | | | | application to provide locking for I/O operations. This doesn't break any of my tests, but the old behavior can be restored by compiling with _FDLOCKS_ENABLED. This will eventually be removed when it is obvious it does not cause any problems. Remove most of flockfile implementation, with the exception of flockfile_debug. Make error messages more informational (submitted by Mike Heffner <spock@techfour.net>, who's now known as mikeh@FreeBSD.org).
* s/_thread_sys_write/__sys_write/deischen2001-01-311-2/+2
| | | | Submitted by: Mike Heffner <mheffner@vt.edu>
* Unbreak world by correctly specifying the prototype for __sys_aio_suspend.deischen2001-01-291-1/+1
| | | | | | A make buildworld was done but not with the committed pthread_private.h. Reported by: Manfred Antar <null@pozo.com>
* _exit in libc is now __sys_exit not __sys__exit.deischen2001-01-291-3/+3
| | | | | | Add another check for thread library initialization (jdp, we really need a way to get _thread_init called at program start before any constructors are run).
* Add weak definitions for wrapped system calls. In general:deischen2001-01-241-140/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | _foo - wrapped system call foo - weak definition to _foo and for cancellation points: _foo - wrapped system call __foo - enter cancellation point, call _foo(), leave cancellation point foo - weak definition to __foo Change use of global _thread_run to call a function to get the currently running thread. Make all pthread_foo functions weak definitions to _pthread_foo, where _pthread_foo is the implementation. This allows an application to provide its own pthread functions. Provide slightly different versions of pthread_mutex_lock and pthread_mutex_init so that we can tell the difference between a libc mutex and an application mutex. Threads holding mutexes internal to libc should never be allowed to exit, call signal handlers, or cancel. Approved by: -arch
* Fix MD macros to work for alpha. Without this fix, threads under alphadeischen2000-11-201-4/+4
| | | | | | | | seem to be totally broke. MFC Candidate Submitted by: gallatin
* When entering the scheduler from the signal handler, telldeischen2000-11-141-1/+4
| | | | | | | | | | | the kernel to (re)use the alternate signal stack. In this case, we don't return normally from the signal handler, so the kernel still thinks we are using the signal stack. The fixes a nasty bug where the signal handler can start fiddling with the stack of a thread while the handler is actually running on the same stack. MFC candidate
* Don't needlessly poll file descriptors when there are nodeischen2000-11-091-31/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | file descriptors needing to be polled (Doh!). Reported by Dan Nelson <dnelson@emsphone.com>. Don't install and start the scheduling timer until the first thread is created. This prevents the overhead of having a periodic scheduling signal in a single threaded program. Reported by Dan Nelson <dnelson@emsphone.com>. Allow builtin longjmps out of application installed signal handlers without the need perform any post-handler cleanup: o Change signal handling to save the threads interrupted context on the stack. The threads current context is now always stored in the same place (in the pthread). If and when a signal handler returns, the interrupted context is copied back to the storage area in the pthread. o Before calling invoking a signal handler for a thread, back the thread out of any internal waiting queues (mutex, CV, join, etc) to which it belongs. Rework uthread_info.c a bit to make it easier to change the format of a thread dump. Use an alternal signal stack for the thread library's signal handler. This allows us to fiddle with the main threads stack without fear of it being in use. Reviewed by: jasone
* Try and get libc_r to compile again on the alpha after deischen's commitpeter2000-10-171-3/+3
|
* Implement zero system call thread switching. Performance ofdeischen2000-10-131-121/+295
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | thread switches should be on par with that under scheduler activations. o Timing is achieved through the use of a fixed interval timer (ITIMER_PROF) to count scheduling ticks instead of retrieving the time-of-day upon every thread switch and calculating elapsed real time. o Polling for I/O readiness is performed once for each scheduling tick instead of every thread switch. o The non-signal saving/restoring versions of setjmp/longjmp are used to save and restore thread contexts. This may allow the removal of _THREAD_SAFE macros from setjmp() and longjmp() - needs more investigation. Change signal handling so that signals are handled in the context of the thread that is receiving the signal. When signals are dispatched to a thread, a special signal handling frame is created on top of the target threads stack. The frame contains the threads saved state information and a new context in which the thread can run. The applications signal handler is invoked through a wrapper routine that knows how to restore the threads saved state and unwind to previous frames. Fix interruption of threads due to signals. Some states were being improperly interrupted while other states were not being interrupted. This should fix several PRs. Signal handlers, which are invoked as a result of a process signal (not by pthread_kill()), are now called with the code (or siginfo_t if SA_SIGINFO was set in sa_flags) and sigcontext_t as received from the process signal handler. Modify the search for a thread to which a signal is delivered. The search algorithm is now: o First thread found in sigwait() with signal in wait mask. o First thread found sigsuspend()'d on the signal. o Current thread if signal is unmasked. o First thread found with signal unmasked. Collapse machine dependent support into macros defined in pthread_private.h. These should probably eventually be moved into separate MD files. Change the range of settable priorities to be compliant with POSIX (0-31). The threads library uses higher priorities internally for real-time threads (not yet implemented) and threads executing signal handlers. Real-time threads and threads running signal handlers add 64 and 32, respectively, to a threads base priority. Some other small changes and cleanups. PR: 17757 18559 21943 Reviewed by: jasone
* Add thread-safe wrapper for fpathconf(2) syscall.sobomax2000-09-191-0/+1
| | | | Reviewed by: jlemon
* Add wrapper for kevent() syscalljlemon2000-08-071-1/+1
| | | | Noted as missing by: nicolas.leonard@animaths.com
* If multiple threads are blocked in sigwait() for the same signal that doesjasone2000-06-271-0/+7
| | | | | | | | | | | | | | | not have a user-supplied signal handler, when a signal is delivered, one thread will receive the signal, and then the code reverts to having no signal handler for the signal. This can leave the other sigwait()ing threads stranded permanently if the signal is later ignored, or can result in process termination when the process should have delivered the signal to one of the threads in sigwait(). To fix this problem, maintain a count of sigwait()ers for each signal that has no default signal handler. Use the count to correctly install/uninstall dummy signal handlers. Reviewed by: deischen
* pthread_mutex_lock(), pthread_cond_trywait(), and pthread_cond_wait() arejasone2000-06-141-1/+12
| | | | | | | | | | not allowed to return EINTR, but use of pthread_suspend_np() could cause EINTR to be returned. To fix this, restructure pthread_suspend_np() so that it does not interrupt a thread that is waiting on a mutex or condition, and keep enough state around that pthread_resume_np() can fix things up afterwards. Reviewed by: deischen
* Back out the previous change to the queue(3) interface.jake2000-05-261-20/+20
| | | | | | It was not discussed and should probably not happen. Requested by: msmith and others
* Change the way that the queue(3) structures are declared; don't assume thatjake2000-05-231-20/+20
| | | | | | | | the type argument to *_HEAD and *_ENTRY is a struct. Suggested by: phk Reviewed by: phk Approved by: mdodd
* Explicitly include sys/cdefs.h to get the definition of __strong_reference(),jasone2000-03-181-0/+1
| | | | rather than getting lucky due to header dependencies.
* Fix pthread_suspend_np/pthread_resume_np. For the record, suspending adeischen2000-03-151-1/+3
| | | | | | | | | | | | | | thread waiting on an event (I/O, condvar, etc) will, when resumed using pthread_resume_np, return with EINTR. For example, suspending and resuming a thread blocked on read() will not requeue the thread for the read, but will return -1 with errno = EINTR. If the suspended thread is in a critical region, the thread is suspended as soon as it leaves the critical region. Fix a bogon in pthread_kill() where a signal was being delivered twice to threads waiting in sigwait(). Reported by (suspend/resume bug): jdp Reviewed by: jasone
* Minor *jmp() cleanups.jasone2000-01-201-2/+3
|
* Add sem_*() functions. Named semaphores and process-shared semaphoresjasone2000-01-201-0/+12
| | | | | | | are not supported by this implementation, and the error return values from sem_init(), sem_open(), sem_close(), and sem_unlink() reflect this. Approved by: jkh
* Do signal deferral for pthread_kill() as it was done in the old days.jasone2000-01-201-5/+0
| | | | Submitted by: deischen
* Implement continuations to correctly handle [sig|_]longjmp() inside of ajasone2000-01-191-1/+52
| | | | | | | | | | | | | | | | | | | | | | signal handler. Explicitly check for jumps to anywhere other than the current stack, since such jumps are undefined according to POSIX. While we're at it, convert thread cancellation to use continuations, since it's cleaner than the original cancellation code. Avoid delivering a signal to a thread twice. This was a pre-existing bug, but was likely unexposed until these other changes were made. Defer signals generated by pthread_kill() so that they can be delivered on the appropriate stack. deischen claims that this is unnecessary, which is likely true, but without this change, pthread_kill() can cause undefined priority queue states and/or PANICs in [sig|_]longjmp(), so I'm leaving this in for now. To compile this code out and exercise the bug, define the _NO_UNDISPATCH cpp macro. Defining _PTHREADS_INVARIANTS as well will cause earlier crashes. PR: kern/14685 Collaboration with: deischen
* Don't explicitly mmap() red zones at the bottom of thread stacks (exceptjasone1999-12-291-5/+18
| | | | | | | | | | the initial thread). Instead, just leave an unmapped gap between thread stacks and make sure that the thread stacks won't grow into these gaps, simply by limiting the size of the stacks with the 'len' argument to mmap(). This (if I understand correctly) reduces VM overhead considerably. Reviewed by: deischen
* Fixes for signal handling:deischen1999-12-171-1/+3
| | | | | | | | | | | | | | o Don't call signal handlers with the signal handler access lock held. o Remove pending signals before calling signal handlers. If pending signals were not removed prior to handling them, invocation of the handler could cause the handler to be called more than once for the same signal. Found by: JB o When SIGCHLD arrives, wake up all threads in PS_WAIT_WAIT (wait4). PR: bin/15328 Reviewed by: jasone
* Change signal handling to conform to POSIX specified semantics.deischen1999-12-041-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this change, a signal was delivered to each thread that didn't have the signal masked. Signals also improperly woke up threads waiting on I/O. With this change, signals are now handled in the following way: o If a thread is waiting in a sigwait for the signal, then the thread is woken up. o If no threads are sigwait'ing on the signal and a thread is in a sigsuspend waiting for the signal, then the thread is woken up. o In the case that no threads are waiting or suspended on the signal, then the signal is delivered to the first thread we find that has the signal unmasked. o If no threads are waiting or suspended on the signal, and no threads have the signal unmasked, then the signal is added to the process wide pending signal set. The signal will be delivered to the first thread that unmasks the signal. If there is an installed signal handler, it is only invoked if the chosen thread was not in a sigwait. In the case that multiple threads are waiting or suspended on a signal, or multiple threads have the signal unmasked, we wake up/deliver the signal to the first thread we find. The above rules still apply. Reported by: Scott Hess <scott@avantgo.com> Reviewed by: jb, jasone
* * Fix the stack allocation code so that it works for alpha. Change itdfr1999-11-281-1/+3
| | | | | | | | | to use mmap(..., MAP_STACK, ...) on alpha too since that should work now. * Add hooks to allow GDB to access the internals of pthreads without having to know the exact layout of struct pthread. Reviewed by: deischen
* add pthread_cancel, obtained from OpenBSD.alfred1999-11-281-6/+27
| | | | | | | | | | | | | | eischen (Daniel Eischen) added wrappers to protect against cancled threads orphaning internal resources. the cancelability code is still a bit fuzzy but works for test programs of my own, OpenBSD's and some examples from ORA's books. add readdir_r to both libc and libc_r add some 'const' attributes to function parameters Reviewed by: eischen, jasone
* sigset_t change (part 5 of 5)marcel1999-09-291-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ----------------------------- Most of the userland changes are in libc. For both the alpha and the i386 setjmp has been changed to accomodate for the new sigset_t. Internally, libc is mostly rewritten to use the new syscalls. The exception is in compat-43/sigcompat.c The POSIX thread library has also been rewritten to use the new sigset_t. Except, that it currently only handles NSIG signals instead of the maximum _SIG_MAXSIG. This should not be a problem because current applications don't use any signals higher than NSIG. There are version bumps for the following libraries: libdialog libreadline libc libc_r libedit libftpio libss These libraries either a) have one of the modified structures visible in the interface, or b) use sigset_t internally and may cause breakage if new binaries are used against libraries that don't have the sigset_t change. This not an immediate issue, but will be as soon as applications start using the new range to its fullest. NOTE: libncurses already had an version bump and has not been given one now. NOTE: doscmd is a real casualty and has been disconnected for the moment. Reconnection will eventually happen after doscmd has been fixed. I'm aware that being the last one to touch it, I'm automaticly promoted to being maintainer. According to good taste this means that I will receive a badge which either will be glued or mechanically stapled, drilled or otherwise violently forced onto me :-) NOTE: pcvt/vttest cannot be compiled with -traditional. The change cause sys/types to be included along the way which contains the const and volatile modifiers. I don't consider this a solution, but more a workaround.
* $Id$ -> $FreeBSD$peter1999-08-281-1/+1
|
* Fix thread initialization to allow for the case where stdio filedeischen1999-08-051-3/+3
| | | | | | | descriptors are not opened. PR: bin/12853 Reviewed by: jb
* Use USRSTACK (defined in <machine/vmparam.h>) to get top of the initial stack.dt1999-07-121-13/+2
| | | | PTHREAD_STACK_TOP was wrong for all supported architectures.
* Modify previous changes to conform better to libc_r's coding style.jasone1999-07-111-5/+9
| | | | | | | | Always use mmap() for default-size stack allocation. Use MAP_ANON instead of MAP_STACK on the alpha architecture. Reduce the amount of code executed while owning _gc_mutex during stack allocation.
* Always use growable thread stacks on the i386. The VM_STACK kernel optionjasone1999-07-061-14/+10
| | | | | must be made default for the alpha before growable thread stacks are enabled for the alpha.
* Use growable stacks for thread stacks that are the default stack size.jasone1999-07-051-2/+44
| | | | | | | | | | | | | Cache discarded default thread stacks for use in subsequent thread creations. Create a red zone at the end of each stack (including the initial thread stack), with the hope of causing a segfault if a stack overflows. To activate these modifications, add -D_PTHREAD_GSTACK to CFLAGS in src/lib/libc_r/Makefile. Since the modifications depend on the VM_STACK kernel option, I'm not sure how to safely use growable stacks by default. Testing, as well as algorithmic and stylistic comments are welcome.
* In the words of the author:jb1999-06-201-88/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o The polling mechanism for I/O readiness was changed from select() to poll(). In additon, a wrapped version of poll() is now provided. o The wrapped select routine now converts each fd_set to a poll array so that the thread scheduler doesn't have to perform a bitwise search for selected fds each time file descriptors are polled for I/O readiness. o The thread scheduler was modified to use a new queue (_workq) for threads that need work. Threads waiting for I/O readiness and spinblocks are added to the work queue in addition to the waiting queue. This reduces the time spent forming/searching the array of file descriptors being polled. o The waiting queue (_waitingq) is now maintained in order of thread wakeup time. This allows the thread scheduler to find the nearest wakeup time by looking at the first thread in the queue instead of searching the entire queue. o Removed file descriptor locking for select/poll routines. An application should not rely on the threads library for providing this locking; if necessary, the application should use mutexes to protect selecting/polling of file descriptors. o Retrieve and use the kernel clock rate/resolution at startup instead of hardcoding the clock resolution to 10 msec (tested with kernel running at 1000 HZ). o All queues have been changed to use queue.h macros. These include the queues of all threads, dead threads, and threads waiting for file descriptor locks. o Added reinitialization of the GC mutex and condition variable after a fork. Also prevented reallocation of the ready queue after a fork. o Prevented the wrapped close routine from closing the thread kernel pipes. o Initialized file descriptor table for stdio entries at thread init. o Provided additional flags to indicate to what queues threads belong. o Moved TAILQ initialization for statically allocated mutex and condition variables to after the spinlock. o Added dispatching of signals to pthread_kill. Removing the dispatching of signals from thread activation broke sigsuspend when pthread_kill was used to send a signal to a thread. o Temporarily set the state of a thread to PS_SUSPENDED when it is first created and placed in the list of threads so that it will not be accidentally scheduled before becoming a member of one of the scheduling queues. o Change the signal handler to queue signals to the thread kernel pipe if the scheduling queues are protected. When scheduling queues are unprotected, signals are then dequeued and handled. o Ensured that all installed signal handlers block the scheduling signal and that the scheduling signal handler blocks all other signals. This ensures that the signal handler is only interruptible for and by non-scheduling signals. An atomic lock is used to decide which instance of the signal handler will handle pending signals. o Removed _lock_thread_list and _unlock_thread_list as they are no longer used to protect the thread list. o Added missing RCS IDs to modified files. o Added checks for appropriate queue membership and activity when adding, removing, and searching the scheduling queues. These checks add very little overhead and are enabled when compiled with _PTHREADS_INVARIANTS defined. Suggested and implemented by Tor Egge with some modification by me. o Close a race condition in uthread_close. (Tor Egge) o Protect the scheduling queues while modifying them in pthread_cond_signal and _thread_fd_unlock. (Tor Egge) o Ensure that when a thread gets a mutex, the mutex is on that threads list of owned mutexes. (Tor Egge) o Set the kernel-in-scheduler flag in _thread_kern_sched_state and _thread_kern_sched_state_unlock to prevent a scheduling signal from calling the scheduler again. (Tor Egge) o Don't use TAILQ_FOREACH macro while searching the waiting queue for threads in a sigwait state, because a change of state destroys the TAILQ link. It is actually safe to do so, though, because once a sigwaiting thread is found, the loop ends and the function returns. (Tor Egge) o When dispatching signals to threads, make the thread inherit the signal deferral flag of the currently running thread. (Tor Egge) Submitted by: Daniel Eischen <eischen@vigrid.com> and Tor Egge <Tor.Egge@fast.no>
* Added a missing comma to the static condition variable initialisationjb1999-05-241-1/+1
| | | | | | definition. Submitted by: David Leonard <David.Leonard@csee.uq.edu.au>, an OpenBSD guy.
* Fix a problem with static initialisation of mutexes and conditionjb1999-05-231-2/+3
| | | | | | variables. Submitted by: Dan Eischen <eischen@vigrid.com>
* [ The author's description... ]jb1999-03-231-21/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o Runnable threads are now maintained in priority queues. The implementation requires two things: 1.) The priority queues must be protected during insertion and removal of threads. Since the kernel scheduler must modify the priority queues, a spinlock for protection cannot be used. The functions _thread_kern_sched_defer() and _thread_kern_sched_undefer() were added to {un}defer kernel scheduler activation. 2.) A thread (active) priority change can be performed only when the thread is removed from the priority queue. The implementation uses a threads active priority when inserting it into the queue. A by-product is that thread switches are much faster. A separate queue is used for waiting and/or blocked threads, and it is searched at most 2 times in the kernel scheduler when there are active threads. It should be possible to reduce this to once by combining polling of threads waiting on I/O with the loop that looks for timed out threads and the minimum timeout value. o Functions to defer kernel scheduler activation were added. These are _thread_kern_sched_defer() and _thread_kern_sched_undefer() and may be called recursively. These routines do not block the scheduling signal, but latch its occurrence. The signal handler will not call the kernel scheduler when the running thread has deferred scheduling, but it will be called when running thread undefers scheduling. o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING. All the POSIX routines required by this should now be implemented. One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required to be defined by including pthread.h. These defines are currently in sched.h. I modified pthread.h to include sched.h but don't know if this is the proper thing to do. o Added support for priority protection and inheritence mutexes. This allows definition of _POSIX_THREAD_PRIO_PROTECT and _POSIX_THREAD_PRIO_INHERIT. o Added additional error checks required by POSIX for mutexes and condition variables. o Provided a wrapper for sigpending which is marked as a hidden syscall. o Added a non-portable function as a debugging aid to allow an application to monitor thread context switches. An application can install a routine that gets called everytime a thread (explicitly created by the application) gets context switched. The routine gets passed the pthread IDs of the threads that are being switched in and out. Submitted by: Dan Eischen <eischen@vigrid.com> Changes by me: o Added a PS_SPINBLOCK state to deal with the priority inversion problem most often (I think) seen by threads calling malloc/free/realloc. o Dispatch signals to the running thread directly rather than at a context switch to avoid the situation where the switch never occurs.
* Increase the size of private thread flags so that the test for ajb1999-01-151-1/+1
| | | | | | | thread trying to call pthread_exit() from a cleanup handler actually works. Submitted by: David Leonard <david.leonard@csee.uq.edu.au> OpenBSD
* Close a window between unlocking a spinlock and changing the thread state.jb1998-11-151-0/+2
|
* - Fix the debug macros.jb1998-09-301-4/+21
| | | | | | | | | | | - Add support of a thread being listed in the dead thread list as well as the thread list. - Add a new thread state to make sigwait work properly. (Submitted by Daniel M. Eischen <eischen@vigrid.com>) - Add global variable for the garbage collector mutex and condition variable. - Delete a couple of prototypes that are no longer required. - Add a prototype for the garbage collector thread.
* Implement pthread read/write locks as defined by Version 2 of the Singlealex1998-09-071-0/+12
| | | | | | | UNIX Specification. As with our standard mutexes, process shared locks are not supported at this time.
* Add compile time thread lock debug support.jb1998-06-091-6/+21
| | | | | Add a thread specific flag to trap the case where pthread_exit() is called from a destructor in violation of the Posix standard.
* Re-design the thread specific key structure.jb1998-06-061-3/+2
|
* Change signal model to match POSIX (i.e. one set of signal handlersjb1998-04-291-32/+51
| | | | | | | | | | | | | | | | | | | | for the process, not a separate set for each thread). By default, the process now only has signal handlers installed for SIGVTALRM, SIGINFO and SIGCHLD. The thread kernel signal handler is installed for other signals on demand. This means that SIG_IGN and SIG_DFL processing is now left to the kernel, not the thread kernel. Change the signal dispatch to no longer use a signal thread, and call the signal handler using the stack of the thread that has the signal pending. Change the atomic lock method to use test-and-set asm code with a yield if blocked. This introduces separate locks for each type of object instead of blocking signals to prevent a context switch. It was this blocking of signals that caused the performance degradation the people have noted. This is a *big* change!
* Change the FILE locking to be by FILE, not by the underlying fd asjb1998-04-111-2/+9
| | | | | | | | | | | | | it was. Add a FILE_WAIT state and queue threads waiting for a FILE lock. Start using the sys/queue.h macros instead of the way that MIT pthreads did it. Add a thread name to the private thread structure and a non-POSIX function to set this. This helps (me at least) when sending a SIGINFO to a threaded process to get a /tmp/uthread.dump to see what the <expletive deleted> threads are doing this time. It is nice to be able to recognise (yes, I spell that with an 's' too) which threads are which.
* Rename static initializer defines for opaque structures so that thejb1998-04-041-2/+2
| | | | POSIX specified names can be declared in pthread.h.
* Add a magic field to the pthread structure to help recognize validjb1998-04-031-1/+8
| | | | | | | | | | | | | | threads from invalid ones. The pthread structure is opaque to the user so this change does not cause any incompatibilities. Hopefully this change will help code that was written for draft 4 fail gracefully if the programmer ignores the compiler warning about the change in the level of indirection for the argument passed to pthread_detach(). I got burnt, so I fixed then (expletive deleted) thing. These functions comply with the revised standard. That should shut Terry up!
* Add sched_yield() witch is the draft 10 equivalent of pthread_yield()jb1998-03-081-22/+8
| | | | | from draft 4. Move some of the schedule definitions to sched.h which is a POSIX header.
OpenPOWER on IntegriCloud