summaryrefslogtreecommitdiffstats
path: root/etc
Commit message (Collapse)AuthorAgeFilesLines
* Connect the new man4.alpha to the build.sheldonh2000-11-201-0/+2
|
* Standardize spelling of "optimization" in commentsdougb2000-11-191-3/+3
| | | | | PR: conf/22622 Submitted by: knu
* When to run the periodic/daily event has had several rounds of discussiondougb2000-11-191-1/+1
| | | | | | | | | | | | over the past couple years. The most recent came to the general consensus that this was the best time, but no one actually made the change, so I'll don my asbestos undies and dive in. Please note that this time was chosen with input from people in various countries with various methods and schedules for switching to and from DST. There is no perfect time to schedule this job that works for everyone, but this time both A) Works for more people, and B) Causes problems for fewer people. And, ultimately, you can always change it if you need to.
* Correct typokris2000-11-191-1/+1
|
* Don't install route for fec0::/10. It was wrongly replaced fromume2000-11-142-6/+4
| | | | | | ff02::/16 by me. PR: 22715
* Disable /usr/bin/ssh being setuid root by default. Let the variablegreen2000-11-141-0/+3
| | | | | | | | | | ENABLE_SUID_SSH being defined reenable it for those that want it. This follows discussion favoring the change from September. It is not usually necessary to be setuid root, possibly less safe, and less convenient (cannot use $HOSTALIASES, for example). Submitted by: jedgar
* fix typo; loppgin -> loginben2000-11-131-1/+1
| | | | | PR: 22823 Submitted by: Jimmy Olgeni <olgeni@uli.it>
* add SII MC-P200sanpei2000-11-131-0/+4
| | | | | Submitted by: Shigeru Ishida <ishida@isl.intec.co.jp> bsd-nomads:14801
* Add webgear aviator cardimp2000-11-121-0/+8
|
* add Melco WLI-PCMsanpei2000-11-101-0/+1
|
* add Nokia Card Phone 2.0 (gsm900/dcs1800 HSCSD terminal)sanpei2000-11-101-4/+0
| | | | | | | and this PC-Card has function ID as modem, pccard.conf entry is not needed. Submitted by: (Roger Hardiman <roger@freebsd.org>)
* Fixed typo in description of ENABLE_SUIDPERL.ru2000-11-101-1/+1
|
* Add commented-out entries for FTP_PROXY and HTTP_PROXY so those behindjkh2000-11-081-1/+12
| | | | | | firewalls have examples to work from. Requested by: chein
* Back out change to prepend /sbin:/bin to $PATH, just overwrite $PATHtruckman2000-11-051-1/+1
| | | | | | | with these in the normal case. Set MAKEDEVPATH in sysinstall to include the /mnt2 stuff before starting the fixit shell.
* Change MAKEDEV so that it prepends /sbin:/bin to $PATH instead of totallytruckman2000-11-051-3/+10
| | | | | | | | | | | | | overwriting $PATH, and find mknod $PATH instead of hardcoding /sbin so that the copy of MAKEDEV on the fixit floppy is usable, since mknod and expr live in /mnt2/stand when the fixit floppy is running. Get rid of the sed invokation in release/Makefile that attempts to delete the PATH setting stuff from MAKEDEV on the fixit floppy. This hasn't worked since a long ago change to MAKEDEV caused the sed expression to no longer match. PR: misc/21241
* MF4: Add LOADER_TFTP_SUPPORT make.conf flag.ps2000-11-041-0/+6
|
* use ``config auto "ata" ?'' for DHU Mobile Media CD-ROMsanpei2000-11-041-1/+1
| | | | | Submitted by: Motonobu KOBAYASHI <kobayashimo@nttdocomo.co.jp> [bsd-nomads:14777]
* Grammar fixgshapiro2000-11-041-1/+1
| | | | Submitted by: asmodai
* Stick the Xircom 10/100 Network PC Card adapter entry in the right sortjhb2000-11-031-6/+6
| | | | | | order. Requested by: sanpei
* /etc/mail/sendmail.cw is /etc/mail/local-host-names, now.dirk2000-11-021-1/+1
| | | | | PR: misc/22261 Submitted by: Michael Bryan <fbsd-security@ursine.com>
* /etc/mail/sendmail.cw is /etc/mail/local-host-names, now.dirk2000-11-021-1/+1
| | | | | PR: misc/22262 Submitted by: Michael Bryan <fbsd-security@ursine.com>
* State that using optimization level above -O for kernel builds isn't smart.obrien2000-11-021-1/+3
|
* use ``config auto'' for COREGA Ether PCC-Tsanpei2000-11-021-2/+1
|
* fixes:andreas2000-11-011-18/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | a) the configured default printer entry might turn out to become a security hole Although lpd isn't enabled by default in FreeBSD 4 and later versions bad things might happen because of a simple copy and paste failure: - fill up root-fs, if /dev/lpt0 doesn't exist - fill up the spool dir (either root-fs or var-fs) if machine hadn't been designed as print server Therefore best decision: if people want printing, then configure both 1. /etc/rc.conf 2. /etc/printcap the default entry wouldn't have served well all tastes and needs anyway... design of most of our config files is, to have commented out suggestions if a service is not active. b) [Garance] fix old and wrong documentation: input filters are possible even if you print to a remote printer this makes FreeBSDs implementation of lpd currently the best without having to switch to port monster LPRng ... c) fix pointer to wrong handbook section for a longer time .. so I doesn't fix the number I'm only referring to the printing section, otherwise this would have to be fixed several times, if the chapters should be reordered again ... d) typo: chose -> choose Submitted by: me and some suggestions by Garance Approved by: Eivind and Garance A Drosihn <drosih@rpi.edu> in private e-mail
* Add BUFFALO LPC3-CLXtoshi2000-11-011-2/+17
| | | | | | | | Submitted by: Takashi Ikeda <ccikeda@moon.aichi-u.ac.jp> Add TOSHIBA Ethernet Card LABCTA00A. Submitted by: "minoru kurata" <minoru.kurata@toshiba.co.jp> Obtained from: PAO3
* Don't use the old URL to the GNU ftp location any more:rse2000-11-011-1/+1
| | | | ftp://prep.ai.mit.edu/pub/gnu/ -> ftp://ftp.gnu.org/gnu/
* Add missing redirection to /dev/null to prevent disturbinghm2000-10-311-2/+2
| | | | of fullscreen display.
* remove duplicated item.sanpei2000-10-311-5/+0
| | | | | | "Laneed Wireless card" is "ELECOM *Laneed* Air@Hawk/LD-WL11/PCC Wireless card" which was already committed.
* Move 'tw*' after 'twe*' so that it's possible to create the control devicemsmith2000-10-311-5/+5
| | | | | | for the 'twe' driver. This is an expedient solution for an actually-manifesting symptom of a major problem with MAKEDEV. Roll on DEVFS.
* Add an entry for the Xircom 10/100 Network PC Card adapter.jhb2000-10-301-0/+6
|
* MFS:sanpei2000-10-301-13/+12
| | | | | | | | | | | | cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
* install rc.firewall6.ume2000-10-301-3/+3
|
* - ipv6_prefix_* and ipv6_ifconfig_* work for end nodeume2000-10-294-221/+695
| | | | | | | | | | | | | | - rtsol should be work for only one interface - new variable ipv6_defaultrouter is added - option name of rtadvd in comment are corrected - ipv6_firewall_enable, ipv6_firewall_type, ipv6_firewall_script, ipv6_firewall_logging are added to introduce rc.firewall6. IPv6 firewall rule is just starting point and should be brushed up. This commit includes PR18621, PR21694, PR22051. PR: conf/18621, conf/21694, conf/22051 Reviewed by: asmodai
* Entry for umodem0 devices, 124.n_hibma2000-10-291-4/+10
|
* Finish the job of conditionalizing UUCP by preventing files in /etc/uucpdougb2000-10-293-4/+10
| | | | | | | | from being installed, and make rmail conditional on neither of NO_SENDMAIL and NOUUCP. PR: bin/21321 Submitted by: Me
* Change flags of ncv and nsp driver. Both were conflicted with the flagsnon2000-10-291-2/+2
| | | | | | | used in lower layer (scsi_low.c). The flag of ncv for KME KXLC004 was chaged from 0x1 to 0x100. The flag of nsp for PIO mode was chaged from 0x1 to 0x100.
* Fix a blatant bug when running '/etc/pccard_ether device stop'.joe2000-10-281-2/+2
| | | | | | | I wasn't dropping the interface correctly, but not noticing because the interface was going away when the card was ejected. Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
* add PC-Card melody beep(PC Card bus, kludge version)sanpei2000-10-281-1/+1
| | | | Original idea from: PAO3
* Comment out the entry for Workbit Ninja SCSI series in PIO mode.non2000-10-271-2/+3
| | | | | | | This confilcted with the entry of non PIO mode. If you want to use them in PIO mode comment out entry of the non PIO mode and uncommnet the PIO mode entry.
* Added "minimum3": spare room for multilingual installer and driver floppy.hosokawa2000-10-262-0/+10
| | | | The size is 3 x 1.44MB.
* Uncommnet entries for PC-Cards which are supposed work with ncv, nsp,non2000-10-261-57/+39
| | | | | | | | | | | and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
* The USB scanner driver. To be used together with SANE.n_hibma2000-10-251-1/+7
|
* Build the ISC library as libisc. This library comes as part of thearchie2000-10-241-0/+2
| | | | | | | | | bind distribution, but until now was not being built as a separate entity. For documentation, see these man pages: assertions(3), eventlib(3), heap(3), logging(3), memcluster(3), tree(3). Reviewed by: jdp
* Oops better ad the ar device to the all target, people might want tosos2000-10-241-0/+1
| | | | install on these...
* Add the ATA RAID (ar) devicesos2000-10-241-2/+4
|
* Add MASTER_SITE_MOZILLA and MASTER_SITE_XEMACS.knu2000-10-241-0/+2
|
* On DEVFS machines, the device name database is no use.phk2000-10-221-2/+6
|
* It is bsd.sites.mk one should look for a full list of default sites,knu2000-10-221-1/+13
| | | | | | | | | not bsd.port.mk anymore. Add MASTER_SITE_XFREE, MASTER_SITE_RINGSERVER, MASTER_SITE_TCLTK and MASTER_SITE_RUBY. Document and add MASTER_SORT_REGEX.
* add TDK Grey Cell GCS2000 Ethernet Cardsanpei2000-10-211-0/+6
| | | | PR: 22184
* Back out increasing entropy file size workaround and wait for real fix instead.ache2000-10-201-1/+1
| | | | Requested by: markm
OpenPOWER on IntegriCloud