summaryrefslogtreecommitdiffstats
path: root/etc/rc.d
Commit message (Collapse)AuthorAgeFilesLines
* when watchdogd is asked to exit nicely (via SIGTERM) it willemax2014-04-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | stop timer. since watchdogd rc.d script is marked as 'shutdown' it will exit (on shutdown) and stop timer. if system happens to hung after watchdogd exited, manual reset is required. when one operates in "lights-out" type of environments and without readily available "remote hands" it could create a problem. this provides ability to override "stop signal" for watchdogd. default behavior is preserved, i.e. watchdogd will still be killed via SIGTERM and timer will be stopped. in order to activate new feature, one needs to put watchdogd_sig_stop="KILL" into /etc/rc.conf and also make sure watchdogd timeout is set to long enough value allowing system to come back online before timeout fires. Obtained from: Netflix MFC after: 1 week
* Loosen the processing of *_IF_aliasN vars to be less strict. Previously,dteske2014-04-072-18/+12
| | | | | | | | | | | the first alias had to be _alias0 and processing stopped at the first non- defined variable (preventing gaps). Allowing gaps gives the administrator the ability to group aliases in an adhoc manner and also lifts the requirement to renumber aliases simply to comment-out an existing one. Aliases are processed in numerical ascending order. Discussed on: -rc MFC after: 1 week
* Update userspace users of hw.bus.devctl_disable.mjg2014-03-261-2/+3
| | | | | | | | This fixes breakage resulting from r263754. Reported by: AN <andy@neu.net> Reviewed by: imp Pointy hat to: me
* Remove IPX support.glebius2014-03-143-53/+4
| | | | | | | | | | | IPX was a network transport protocol in Novell's NetWare network operating system from late 80s and then 90s. The NetWare itself switched to TCP/IP as default transport in 1998. Later, in this century the Novell Open Enterprise Server became successor of Novell NetWare. The last release that claimed to still support IPX was OES 2 in 2007. Routing equipment vendors (e.g. Cisco) discontinued support for IPX in 2011. Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
* Allow overriding rctl.conf(5) file location for /etc/rc.d/rctlbdrewery2014-02-151-2/+2
| | | | | | Reviewed by: trasz Approved by: bapt (mentor) MFC after: 1 week
* Upgrade to OpenSSH 6.5p1.des2014-01-311-1/+3
|
* Do not exit with non-zero return code if sysctl.conf or sysctl.conf.local filesdemon2014-01-211-1/+3
| | | | | | are absent. Approved by: delphij
* Honor WITHOUT_CASPER.gjb2013-12-211-1/+5
| | | | Sponsored by: The FreeBSD Foundation
* Start-up script for casperd daemon.pjd2013-12-162-0/+20
| | | | Sponsored by: The FreeBSD Foundation
* Rev 256256 had an undocumented side effect of breaking existing behaviorpeter2013-12-081-2/+2
| | | | | | | | for ipv6 jails. Among the harmful side effects included putting a route to an entire /64 onto an interface even if you were in a smaller network - eg: /80. This broke the freebsd.org cluster hosted at ISC which has /80 networks.
* Add support for multiple instances of ftp-proxyjpaetzel2013-11-132-8/+111
| | | | | | | and pflog devices. PR: conf/158171 Submitted by: Thomas Johnson <tom@claimlynx.com>
* Remove remnants of BIND from /etc, since there is no BIND in base now.glebius2013-11-055-305/+2
| | | | | | | Sorry, that would break users running head and BIND from ports, since ports rely on these scripts. The ports will be fixed soon. Reviewed by: erwin
* Remove more remnants of ng_fec(4).glebius2013-10-281-3/+0
| | | | | | | | The ng_create_one() and ng_mkpeer() functions in network.subr are now not used anywhere, but I left them, since they can be useful in future in netgraph scripting. Submitted by: pluknet
* Add a reload command.des2013-10-221-0/+6
| | | | | Reviewed by: hrs MFC after: 3 days
* - Fix jail_parallel_start="YES".hrs2013-10-211-26/+60
| | | | | | - Fix ip[46].addr when interface parameter is not defined. Spotted by: rpaulo
* Enable the automatic creation of a certificate (if one does not exists)jmg2013-10-191-0/+125
| | | | | | | | | | | | | | | | | and enable the usage by sendmail if sendmail is enabled. Include and document knobs to disable this feature and also set the Common Name of the certificate created. As the certificate is signed w/ a discarded key, it only helps prevent Eve, but not Malory from knowing the contents of the emails. This means that new installs (and people that use the updated freebsd.mc file) will automaticly have STARTTLS enabled allowing incoming email to be encrypted in most cases. Reviewed by: gshapiro MFC after: 3 days Security: Yes, please.
* - Fix a bug which prevented jails from starting when $jail_conf was used andhrs2013-10-181-15/+26
| | | | | | | no jail name was specified. - Display error messages when start/stop fails. Reported by: swills
* - Fix "ifname|addr" syntax support in jail_{jname}_ip.hrs2013-10-151-17/+44
| | | | - Create /var/run/jail_{jname}.id because ezjail-admin depends on it.
* - Normalize jailname. "example.com" is converted to "example_com".hrs2013-10-141-20/+34
| | | | | | | | | - Fix a bug that some $jail_{jname}_foo variables did not work. - Fix a bug which prevented $jail_devfs_ruleset from working[1]. - Move $jail_parameters to the last of the configuraiton lines[1]. Reported by: Jase Thew[1] Approved by: re (glebius)
* - Add mount.fdescfs parameter to jail(8). This is similar tohrs2013-10-121-3/+2
| | | | | | | | | | mount.devfs but mounts fdescfs. The mount happens just after mount.devfs. - rc.d/jail now displays whole error message from jail(8) when a jail fails to start. Approved by: re (gjb)
* Merge from project branch. Uninteresting commits are trimmed.markm2013-10-121-34/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor of /dev/random device. Main points include: * Userland seeding is no longer used. This auto-seeds at boot time on PC/Desktop setups; this may need some tweeking and intelligence from those folks setting up embedded boxes, but the work is believed to be minimal. * An entropy cache is written to /entropy (even during installation) and the kernel uses this at next boot. * An entropy file written to /boot/entropy can be loaded by loader(8) * Hardware sources such as rdrand are fed into Yarrow, and are no longer available raw. ------------------------------------------------------------------------ r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines Add a RANDOM_RWFILE option and hide the entropy cache code behind it. Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA. Add the RANDOM_* options to LINT. ------------------------------------------------------------------------ r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines Define RANDOM_PURE_RNDTEST for rndtest(4). ------------------------------------------------------------------------ r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines staticize struct random_hardware_source ------------------------------------------------------------------------ r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines Wrap some policy-rich code in 'if NOTYET' until we can thresh out what it really needs to do. ------------------------------------------------------------------------ r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines Re-add /dev/urandom for compatibility purposes. ------------------------------------------------------------------------ r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines Add missing include guards and move the existing ones out of the implementation namespace. ------------------------------------------------------------------------ r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines Fix some just-noticed problems: o Allow this to work with "nodevice random" by fixing where the MALLOC pool is defined. o Fix the explicit reseed code. This was correct as submitted, but in the project branch doesn't need to set the "seeded" bit as this is done correctly in the "unblock" function. o Remove some debug ifdeffing. o Adjust comments. ------------------------------------------------------------------------ r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines Time to eat crow for me. I replaced the sx_* locks that Arthur used with regular mutexes; this turned out the be the wrong thing to do as the locks need to be sleepable. Revert this folly. # Submitted by: Arthur Mesh <arthurmesh@gmail.com> (In original diff) ------------------------------------------------------------------------ r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines Add YARROW_RNG and FORTUNA_RNG to sys/conf/options. Add a SYSINIT that forces a reseed during proc0 setup, which happens fairly late in the boot process. Add a RANDOM_DEBUG option which enables some debugging printf()s. Add a new RANDOM_ATTACH entropy source which harvests entropy from the get_cyclecount() delta across each call to a device attach method. ------------------------------------------------------------------------ r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use EVENTHANDLER(mountroot) instead. This means we can't count on /var being present, so something will need to be done about harvesting /var/db/entropy/... . Some policy now needs to be sorted out, and a pre-sync cache needs to be written, but apart from that we are now ready to go. Over to review. ------------------------------------------------------------------------ r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines Snapshot. Looking pretty good; this mostly works now. New code includes: * Read cached entropy at startup, both from files and from loader(8) preloaded entropy. Failures are soft, but announced. Untested. * Use EVENTHANDLER to do above just before we go multiuser. Untested. ------------------------------------------------------------------------ r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines Fix up the man page for random(4). This mainly removes no-longer-relevant details about HW RNGs, reseeding explicitly and user-supplied entropy. ------------------------------------------------------------------------ r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines As userland writing to /dev/random is no more, remove the "better than nothing" bootstrap mode. Add SWI harvesting to the mix. My box seeds Yarrow by itself in a few seconds! YMMV; more to follow. ------------------------------------------------------------------------ r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines Debug run. This now works, except that the "live" sources haven't been tested. With all sources turned on, this unlocks itself in a couple of seconds! That is no my box, and there is no guarantee that this will be the case everywhere. * Cut debug prints. * Use the same locks/mutexes all the way through. * Be a tad more conservative about entropy estimates. ------------------------------------------------------------------------ r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines Don't use the "real" assembler mnemonics; older compilers may not understand them (like when building CURRENT on 9.x). # Submitted by: Konstantin Belousov <kostikbel@gmail.com> ------------------------------------------------------------------------ r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines SNAPSHOT. Simplify the malloc pools; We only need one for this device. Simplify the harvest queue. Marginally improve the entropy pool hashing, making it a bit faster in the process. Connect up the hardware "live" source harvesting. This is simplistic for now, and will need to be made rate-adaptive. All of the above passes a compile test but needs to be debugged. ------------------------------------------------------------------------ r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. # Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item) ------------------------------------------------------------------------ r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines Yarrow wants entropy estimations to be conservative; the usual idea is that if you are certain you have N bits of entropy, you declare N/2. ------------------------------------------------------------------------ r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the usual harvest queues. It was a nifty idea, but too heavyweight. # Submitted by: Arthur Mesh <arthurmesh@gmail.com> ------------------------------------------------------------------------ r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines Separate out the Software RNG entropy harvesting queue and thread into its own files. # Submitted by: Arthur Mesh <arthurmesh@gmail.com> ------------------------------------------------------------------------ r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines Remove the short-lived namei experiment. ------------------------------------------------------------------------ r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines Snapshot; Do some running repairs on entropy harvesting. More needs to follow. ------------------------------------------------------------------------ r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines Snapshot of current work; 1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific or close enough to the Yarrow algorithm. For the rest use a neutral name. 2) Tidy up headers; put private stuff in private places. More could be done here. 3) Streamline the hashing/encryption; no need for a 256-bit counter; 128 bits will last for long enough. There are bits of debug code lying around; these will be removed at a later stage. ------------------------------------------------------------------------ r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines 1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow # Submitted by: Arthur Mesh <arthurmesh@gmail.com> Submitted by: Dag-Erling Smørgrav <des@FreeBSD.org>, Arthur Mesh <arthurmesh@gmail.com> Reviewed by: des@FreeBSD.org Approved by: re (delphij) Approved by: secteam (des,delphij)
| * MFC - tracking commit.markm2013-10-081-1/+1
| |\
| * | As userland writing to /dev/random is no more, remove the "better than ↵markm2013-10-061-34/+6
| | | | | | | | | | | | | | | | | | | | | | | | nothing" bootstrap mode. Add SWI harvesting to the mix. My box seeds Yarrow by itself in a few seconds! YMMV; more to follow.
| * | MFC - tracking commit.markm2013-10-041-6/+25
| | |
| * | MFC - tracking commitmarkm2013-10-031-3/+6
| | |
* | | - Update rc.d/jail to use a jail(8) configuration file instead ofhrs2013-10-101-570/+299
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | command line options. The "jail_<jname>_*" rc.conf(5) variables for per-jail configuration are automatically converted to /var/run/jail.<jname>.conf before the jail(8) utility is invoked. This is transparently backward compatible. - Fix a minor bug in jail(8) which prevented it from returning false when jail -r failed. Approved by: re (glebius)
* | | Add support for "vnet jname" argument in ifconfig_IF. The vnet keywordhrs2013-10-101-4/+33
| |/ |/| | | | | | | | | | | | | | | | | | | is ignored except for "rc.d/netif vnet{up,down} ifn" because a jail is usually created after interface initialization on boot time. "rc.d/netif vnetup ifn" moves ifn into the specified jail. It is designed to be used in other scripts like rc.d/jail, not automatically invoked during the interface initialization. Approved by: re (kib)
* | Reduce priority of host key exists message in sshd startupdelphij2013-10-071-1/+1
| | | | | | | | | | | | script to info. Approved by: re (gjb)
* | Add epair(4) support in $cloned_interfaces. One should be specifiedhrs2013-10-041-6/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | as "epair0" in $cloned_interfaces and "epair0[ab]" in the others in rc.conf like the following: cloned_interfaces="epair0" ifconfig_epair0a="inet 192.168.1.1/24" ifconfig_epair0b="inet 192.168.2.1/24" /etc/rc.d/netif now accepts both "netif start epair0" and "netif start epair0a". Approved by: re (kib)
* | Do not install bluetooth rc(8) scripts if MK_BLUETOOTH = no.gjb2013-10-031-3/+6
|/ | | | | | Approved by: re (glebius) MFC after: 3 days Sponsored by: The FreeBSD Foundation
* Forgotten in r255825: NETWORKING requires local_unbound.des2013-09-241-1/+1
| | | | Approved by: re (blanket)
* Move local_unbound up in the rc order.des2013-09-231-1/+1
| | | | Approved by: re (blanket)
* Add a setup script for unbound(8) called local-unbound-setup. Itdes2013-09-232-0/+96
| | | | | | | | | | | | | | | | | | | | | | | | | generates a configuration suitable for running unbound as a caching forwarding resolver, and configures resolvconf(8) to update unbound's list of forwarders in addition to /etc/resolv.conf. The initial list is taken from the existing resolv.conf, which is rewritten to point to localhost. Alternatively, a list of forwarders can be provided on the command line. To assist this script, add an rc.subr command called "enabled" which does nothing except return 0 if the service is enabled and 1 if it is not, without going through the usual checks. We should consider doing the same for "status", which is currently pointless. Add an rc script for unbound, called local_unbound. If there is no configuration file, the rc script runs local-unbound-setup to generate one. Note that these scripts place the unbound configuration files in /var/unbound rather than /etc/unbound. This is necessary so that unbound can reload its configuration while chrooted. We should probably provide symlinks in /etc. Approved by: re (blanket)
* Ditch the random seeding code, which never really worked as intended.des2013-09-211-66/+39
| | | | | | | | Add config variables to enable / disable individual host key algorithms. Clean up the host key generation code. Approved by: re (gjb) MFC after: 3 weeks
* - Fix pidfile handling in sendmail_msp_queue. The pidfile was ignoredhrs2013-09-171-5/+2
| | | | | | | | | and multiple instances were invoked by start/stop cycles. - Remove redundant start_cmd rewrite. Approved by: re (gjb) Tested by: jmg
* Bring in the new iSCSI target and initiator.trasz2013-09-144-0/+65
| | | | | | Reviewed by: ken (parts) Approved by: re (delphij) Sponsored by: FreeBSD Foundation
* ipfilter 5.1.2 no longer supports sysctl. Use ipf -V to determine ifcy2013-09-103-6/+4
| | | | | | | available (the kernel module is loaded or compiled into the kernel). Approved by: glebius (mentor) Approved by: re (blanket)
* Create the default router last. This allows using an staticdelphij2013-09-021-2/+2
| | | | | | | | interface route for default routes, which seems to be common among many dedicated hosting providers. Reviewed by: hrs MFC after: 2 weeks
* After writing a kernel core dump into /var/crash, call sync(8).gavin2013-08-281-0/+1
| | | | | | | | | | | | | If we panic again shortly after boot (say, within 30 seconds), any core dump we wrote out may be lost on reboot. In this situation, we really want to keep that core file, as it may be the only way to have the issue resolved. Call sync(8) after writing out the core file and running crashinfo(8), in the hope that these will not be lost if we panic again. sync(8) is only called in the case where there is a core dump to be written out, so won't be called during normal boots. Discovered by: Trying to debug an IPSEC panic MFC after: 1 week
* Pass pidfile to bsnmpd if it's been changed (parts cut/pasted frompeter2013-08-191-1/+2
| | | | rc.d/rarpd and rc.d/wpa_supplicant)
* Revert r254508.peter2013-08-191-11/+1
|
* Add the optional ability to run as a different user.peter2013-08-191-1/+11
| | | | Obtained from: Antique freebsd.org cluster archive images
* - Reimplement $gif_interfaces as a variant of $cloned_interfaces.hrs2013-08-041-9/+34
| | | | | | | | | | | | | | | | | | Newly-configured systems should use $cloned_interfaces. - Call clone_{up,down}() and ifnet_rename() in rc.d/netif {start,stop}. ifnet_rename() now accepts an interface name list as its argument. - Add rc.d/netif clear. The "clear" subcommand is basically equivalent to "stop" but it does not call clone_down(). - Add "ifname:sticky" keyword into $cloned_interfaces. If :sticky is specified, the interface will not be destroyed in rc.d/netif stop. - Add cloned_interfaces_sticky={YES,NO}. This variable globally sets :sticky keyword above for all interfaces. The default value is NO. When cloned_interfaces_sticky=YES, :nosticky keyword can be used to override it on per interface basis.
* When stopping pfsync, remove the pfsync interface's syncpeer setting.des2013-07-151-1/+1
| | | | MFC after: 3 days
* rc.d/zfs: pass -v option to zfs mountavg2013-07-091-1/+1
| | | | | | | this should make boot process more informative (and entertaining) on systems with lots of zfs filesystems. MFC after: 7 days
* - Add vnode-backed swap space specification support. This is enabled whenhrs2013-06-277-115/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | device names "md" or "md[0-9]*" and a "file" option are specified in /etc/fstab like this: md none swap sw,file=/swap.bin 0 0 - Add GBDE/GELI encrypted swap space specification support, which rc.d/encswap supported. The /etc/fstab lines are like the following: /dev/ada1p1.bde none swap sw 0 0 /dev/ada1p2.eli none swap sw 0 0 .eli devices accepts aalgo, ealgo, keylen, and sectorsize as options. swapctl(8) can understand an encrypted device in the command line like this: # swapctl -a /dev/ada2p1.bde - "-L" flag is added to support "late" option to defer swapon until rc.d/mountlate runs. - rc.d script change: rc.d/encswap -> removed rc.d/addswap -> just display a warning message if $swapfile is defined rc.d/swap1 -> renamed to rc.d/swap rc.d/swaplate -> newly added to support "late" option These changes alleviate a race condition between device creation/removal and swapon/swapoff. MFC after: 1 week Reviewed by: wblock (manual page)
* Implement ifconfig_wlanX="HOSTAP".rpaulo2013-06-261-3/+10
| | | | | | | | | Not only this is a bit cleaner, it allows multiple instances of hostapd to be running on the system host, useful for simultaneous dual-band WiFi. This is similar to ifconfig_wlanX="WPA" but it uses /etc/hostapd-wlanX.conf. Compatibility with hostapd_enable=YES/NO was kept. Reviewed by: adrian
* Call sshd_precmd instead of sshd_configtest when the operatordelphij2013-06-211-2/+2
| | | | | | | | | | requests reload or restart, which, in addition of testing the configuration, will also generate host keys when they are not present (previous behavior). Obtained from: FreeNAS Ok'ed by: bdrewery, des MFC after: 1 week
* Allow $ntpdate_config to be NULL. Due to a lack of surrounding quotes, whendteske2013-06-181-2/+2
| | | | | | | ntpdate_config was set to NULL the conditional would (counter to prevailing logic) succeed -- leading to awk attempting to redirect from a NULL pathname standard-in. While we're here, make the script consistant with itself by removing the {curlies} around ntpdate_config (they are unnecessary).
* Clean up swapfile memory disk on shutdowncrees2013-06-121-4/+39
| | | | | | | | Make the md unit number configurable so that it can be predicted PR: bin/168544 Submitted by: wblock (based on) Approved by: kevlo
OpenPOWER on IntegriCloud